move lpc55 into its own family

3 files changed, 0 insertions, 564 deletions

diff --git a/hw/bsp/double_m33_express/LPC55S69_cm33_core0_uf2.ld b/hw/bsp/double_m33_express/LPC55S69_cm33_core0_uf2.ld
deleted file mode 100644
index 6b5d852aa..000000000
--- a/hw/bsp/double_m33_express/LPC55S69_cm33_core0_uf2.ld
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
-** ###################################################################
-**     Processors:          LPC55S69JBD100_cm33_core0
-**                          LPC55S69JBD64_cm33_core0
-**                          LPC55S69JEV98_cm33_core0
-**
-**     Compiler:            GNU C Compiler
-**     Reference manual:    LPC55S6x/LPC55S2x/LPC552x User manual(UM11126) Rev.1.3  16 May 2019
-**     Version:             rev. 1.1, 2019-05-16
-**     Build:               b191008
-**
-**     Abstract:
-**         Linker file for the GNU C Compiler
-**
-**     Copyright 2016 Freescale Semiconductor, Inc.
-**     Copyright 2016-2019 NXP
-**     All rights reserved.
-**
-**     SPDX-License-Identifier: BSD-3-Clause
-**
-**     http:                 www.nxp.com
-**     mail:                 [email protected]
-**
-** ###################################################################
-*/
-
-
-
-/* Entry Point */
-ENTRY(Reset_Handler)
-
-HEAP_SIZE  = DEFINED(__heap_size__)  ? __heap_size__  : 0x0400;
-STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0800;
-RPMSG_SHMEM_SIZE = DEFINED(__use_shmem__) ? 0x1800 : 0;
-
-/* Specify the memory areas */
-MEMORY
-{
-  m_interrupts          (RX)  : ORIGIN = 0x00010000, LENGTH = 0x00000200
-  m_text                (RX)  : ORIGIN = 0x00010200, LENGTH = 0x0007FE00
-  m_core1_image         (RX)  : ORIGIN = 0x00090000, LENGTH = 0x00008000
-  m_data                (RW)  : ORIGIN = 0x20000000, LENGTH = 0x00033000 - RPMSG_SHMEM_SIZE
-  rpmsg_sh_mem          (RW)  : ORIGIN = 0x20033000 - RPMSG_SHMEM_SIZE, LENGTH = RPMSG_SHMEM_SIZE
-  m_usb_sram            (RW)  : ORIGIN = 0x40100000, LENGTH = 0x00004000
-}
-
-/* Define output sections */
-SECTIONS
-{
-  /* section for storing the secondary core image */
-  .m0code :
-  {
-     . = ALIGN(4) ;
-    KEEP (*(.m0code))
-     *(.m0code*)
-     . = ALIGN(4) ;
-  } > m_core1_image
-
-  /* NOINIT section for rpmsg_sh_mem */
-  .noinit_rpmsg_sh_mem (NOLOAD) : ALIGN(4)
-  {
-     __RPMSG_SH_MEM_START__ = .;
-     *(.noinit.$rpmsg_sh_mem*)
-     . = ALIGN(4) ;
-     __RPMSG_SH_MEM_END__ = .;
-  } > rpmsg_sh_mem
-
-  /* The startup code goes first into internal flash */
-  .interrupts :
-  {
-    . = ALIGN(4);
-    KEEP(*(.isr_vector))     /* Startup code */
-    . = ALIGN(4);
-  } > m_interrupts
-
-  /* The program code and other data goes into internal flash */
-  .text :
-  {
-    . = ALIGN(4);
-    *(.text)                 /* .text sections (code) */
-    *(.text*)                /* .text* sections (code) */
-    *(.rodata)               /* .rodata sections (constants, strings, etc.) */
-    *(.rodata*)              /* .rodata* sections (constants, strings, etc.) */
-    *(.glue_7)               /* glue arm to thumb code */
-    *(.glue_7t)              /* glue thumb to arm code */
-    *(.eh_frame)
-    KEEP (*(.init))
-    KEEP (*(.fini))
-    . = ALIGN(4);
-  } > m_text
-
-  .ARM.extab :
-  {
-    *(.ARM.extab* .gnu.linkonce.armextab.*)
-  } > m_text
-
-  .ARM :
-  {
-    __exidx_start = .;
-    *(.ARM.exidx*)
-    __exidx_end = .;
-  } > m_text
-
- .ctors :
-  {
-    __CTOR_LIST__ = .;
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*crtbegin?.o(.ctors))
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-    __CTOR_END__ = .;
-  } > m_text
-
-  .dtors :
-  {
-    __DTOR_LIST__ = .;
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*crtbegin?.o(.dtors))
-    KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-    __DTOR_END__ = .;
-  } > m_text
-
-  .preinit_array :
-  {
-    PROVIDE_HIDDEN (__preinit_array_start = .);
-    KEEP (*(.preinit_array*))
-    PROVIDE_HIDDEN (__preinit_array_end = .);
-  } > m_text
-
-  .init_array :
-  {
-    PROVIDE_HIDDEN (__init_array_start = .);
-    KEEP (*(SORT(.init_array.*)))
-    KEEP (*(.init_array*))
-    PROVIDE_HIDDEN (__init_array_end = .);
-  } > m_text
-
-  .fini_array :
-  {
-    PROVIDE_HIDDEN (__fini_array_start = .);
-    KEEP (*(SORT(.fini_array.*)))
-    KEEP (*(.fini_array*))
-    PROVIDE_HIDDEN (__fini_array_end = .);
-  } > m_text
-
-  __etext = .;    /* define a global symbol at end of code */
-  __DATA_ROM = .; /* Symbol is used by startup for data initialization */
-
-  .data : AT(__DATA_ROM)
-  {
-    . = ALIGN(4);
-    __DATA_RAM = .;
-    __data_start__ = .;      /* create a global symbol at data start */
-    *(.ramfunc*)             /* for functions in ram */
-    *(.data)                 /* .data sections */
-    *(.data*)                /* .data* sections */
-    KEEP(*(.jcr*))
-    . = ALIGN(4);
-    __data_end__ = .;        /* define a global symbol at data end */
-  } > m_data
-
-  __DATA_END = __DATA_ROM + (__data_end__ - __data_start__);
-  text_end = ORIGIN(m_text) + LENGTH(m_text);
-  ASSERT(__DATA_END <= text_end, "region m_text overflowed with text and data")
-
-  /* Uninitialized data section */
-  .bss :
-  {
-    /* This is used by the startup in order to initialize the .bss section */
-    . = ALIGN(4);
-    __START_BSS = .;
-    __bss_start__ = .;
-    *(.bss)
-    *(.bss*)
-    *(COMMON)
-    . = ALIGN(4);
-    __bss_end__ = .;
-    __END_BSS = .;
-  } > m_data
-
-  .heap :
-  {
-    . = ALIGN(8);
-    __end__ = .;
-    PROVIDE(end = .);
-    __HeapBase = .;
-    . += HEAP_SIZE;
-    __HeapLimit = .;
-    __heap_limit = .; /* Add for _sbrk */
-  } > m_data
-
-  .stack :
-  {
-    . = ALIGN(8);
-    . += STACK_SIZE;
-  } > m_data
-
-  m_usb_bdt (NOLOAD) :
-  {
-    . = ALIGN(512);
-    *(m_usb_bdt)
-  } > m_usb_sram
-
-  m_usb_global (NOLOAD) :
-  {
-    *(m_usb_global)
-  } > m_usb_sram
-
-  /* Initializes stack on the end of block */
-  __StackTop   = ORIGIN(m_data) + LENGTH(m_data);
-  __StackLimit = __StackTop - STACK_SIZE;
-  PROVIDE(__stack = __StackTop);
-
-  .ARM.attributes 0 : { *(.ARM.attributes) }
-
-  ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap")
-}
-
diff --git a/hw/bsp/double_m33_express/board.mk b/hw/bsp/double_m33_express/board.mk
deleted file mode 100644
index 5757aa5cd..000000000
--- a/hw/bsp/double_m33_express/board.mk
+++ /dev/null
@@ -1,55 +0,0 @@
-CFLAGS += \
-  -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m33 \
-  -mfloat-abi=hard \
-  -mfpu=fpv5-sp-d16 \
-  -DCPU_LPC55S69JBD100_cm33_core0 \
-  -DCFG_TUSB_MCU=OPT_MCU_LPC55XX \
-  -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))' \
-  -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
-
-# mcu driver cause following warnings
-CFLAGS += -Wno-error=unused-parameter -Wno-error=float-equal
-
-MCU_DIR = hw/mcu/nxp/sdk/devices/LPC55S69
-
-# All source paths should be relative to the top level.
-LD_FILE = hw/bsp/$(BOARD)/LPC55S69_cm33_core0_uf2.ld
-
-SRC_C += \
-	$(MCU_DIR)/system_LPC55S69_cm33_core0.c \
-	$(MCU_DIR)/drivers/fsl_clock.c \
-	$(MCU_DIR)/drivers/fsl_gpio.c \
-	$(MCU_DIR)/drivers/fsl_power.c \
-	$(MCU_DIR)/drivers/fsl_reset.c \
-	$(MCU_DIR)/drivers/fsl_usart.c \
-	$(MCU_DIR)/drivers/fsl_flexcomm.c \
-	lib/sct_neopixel/sct_neopixel.c 
-
-INC += \
-    $(TOP)/hw/bsp/ \
-	$(TOP)/hw/bsp/$(BOARD) \
-	$(TOP)/lib/sct_neopixel \
-	$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
-	$(TOP)/$(MCU_DIR) \
-	$(TOP)/$(MCU_DIR)/drivers
-
-SRC_S += $(MCU_DIR)/gcc/startup_LPC55S69_cm33_core0.S
-
-LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_hardabi.a
-
-# For TinyUSB port source
-VENDOR = nxp
-CHIP_FAMILY = lpc_ip3511
-
-# For freeRTOS port source
-FREERTOS_PORT = ARM_CM33_NTZ/non_secure
-
-# For flash-jlink target
-JLINK_DEVICE = LPC55S69
-
-# flash using pyocd
-flash: $(BUILD)/$(PROJECT).hex
-	pyocd flash -t LPC55S69 $<
diff --git a/hw/bsp/double_m33_express/double_m33_express.c b/hw/bsp/double_m33_express/double_m33_express.c
deleted file mode 100644
index 655f23cc0..000000000
--- a/hw/bsp/double_m33_express/double_m33_express.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2018, hathach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#include "../board.h"
-#include "fsl_device_registers.h"
-#include "fsl_gpio.h"
-#include "fsl_power.h"
-#include "fsl_iocon.h"
-#include "fsl_usart.h"
-#include "fsl_sctimer.h"
-#include "sct_neopixel.h"
-
-//--------------------------------------------------------------------+
-// Forward USB interrupt events to TinyUSB IRQ Handler
-//--------------------------------------------------------------------+
-void USB0_IRQHandler(void)
-{
-  tud_int_handler(0);
-}
-
-void USB1_IRQHandler(void)
-{
-  tud_int_handler(1);
-}
-
-//--------------------------------------------------------------------+
-// MACRO TYPEDEF CONSTANT ENUM
-//--------------------------------------------------------------------+
-#define LED_PORT              0
-#define LED_PIN               1
-#define LED_STATE_ON          1
-
-// WAKE button
-#define BUTTON_PORT           0
-#define BUTTON_PIN            5
-#define BUTTON_STATE_ACTIVE   0
-
-// Number of neopixels
-#define NEOPIXEL_NUMBER       2
-#define NEOPIXEL_PORT         0
-#define NEOPIXEL_PIN          27
-#define NEOPIXEL_CH           6
-#define NEOPIXEL_TYPE         0  
-
-// UART
-#define UART_DEV              USART0
-
-// IOCON pin mux
-#define IOCON_PIO_DIGITAL_EN 0x0100u  /*!<@brief Enables digital function */
-#define IOCON_PIO_FUNC0 0x00u         /*!<@brief Selects pin function 0 */
-#define IOCON_PIO_FUNC1 0x01u         /*!<@brief Selects pin function 1 */
-#define IOCON_PIO_FUNC4 0x04u         /*!<@brief Selects pin function 4 */
-#define IOCON_PIO_FUNC7 0x07u         /*!<@brief Selects pin function 7 */
-#define IOCON_PIO_INV_DI 0x00u        /*!<@brief Input function is not inverted */
-#define IOCON_PIO_MODE_INACT 0x00u    /*!<@brief No addition pin function */
-#define IOCON_PIO_OPENDRAIN_DI 0x00u  /*!<@brief Open drain is disabled */
-#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
-
-#define IOCON_PIO_DIG_FUNC0_EN   (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC0) /*!<@brief Digital pin function 0 enabled */
-#define IOCON_PIO_DIG_FUNC1_EN   (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC1) /*!<@brief Digital pin function 1 enabled */
-#define IOCON_PIO_DIG_FUNC4_EN   (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC4) /*!<@brief Digital pin function 2 enabled */
-#define IOCON_PIO_DIG_FUNC7_EN   (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC7) /*!<@brief Digital pin function 2 enabled */
-
-
-// Global Variables
-uint32_t pixelData[NEOPIXEL_NUMBER];
-
-/****************************************************************
-name: BOARD_BootClockFROHF96M
-outputs:
-- {id: SYSTICK_clock.outFreq, value: 96 MHz}
-- {id: System_clock.outFreq, value: 96 MHz}
-settings:
-- {id: SYSCON.MAINCLKSELA.sel, value: SYSCON.fro_hf}
-sources:
-- {id: SYSCON.fro_hf.outFreq, value: 96 MHz}
-******************************************************************/
-void BootClockFROHF96M(void)
-{
-  /*!< Set up the clock sources */
-  /*!< Set up FRO */
-  POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on  */
-  CLOCK_SetupFROClocking(12000000U);     /*!< Set up FRO to the 12 MHz, just for sure */
-  CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change voltage without
-                                             accidentally being below the voltage for current speed */
-
-  CLOCK_SetupFROClocking(96000000U); /*!< Set up high frequency FRO output to selected frequency */
-
-  POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
-  CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */
-
-  /*!< Set up dividers */
-  CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false);     /*!< Set AHBCLKDIV divider to value 1 */
-
-  /*!< Set up clock selectors - Attach clocks to the peripheries */
-  CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */
-
-  /*!< Set SystemCoreClock variable. */
-  SystemCoreClock = 96000000U;
-}
-
-void board_init(void)
-{
-  // Enable IOCON clock
-  CLOCK_EnableClock(kCLOCK_Iocon);
-
-  // Init 96 MHz clock
-  BootClockFROHF96M();
-
-#if CFG_TUSB_OS == OPT_OS_NONE
-  // 1ms tick timer
-  SysTick_Config(SystemCoreClock / 1000);
-#elif CFG_TUSB_OS == OPT_OS_FREERTOS
-  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
-  NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
-#endif
-
-  GPIO_PortInit(GPIO, 0);
-  GPIO_PortInit(GPIO, 1);
-
-  // LED
-  /* PORT0 PIN1 configured as PIO0_1 */
-  IOCON_PinMuxSet(IOCON, 0U, 1U, IOCON_PIO_DIG_FUNC0_EN);
-
-  gpio_pin_config_t const led_config = { kGPIO_DigitalOutput, 1};
-  GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config);
-
-  // Neopixel
-  /* PORT0 PIN27 configured as SCT0_OUT6 */
-  IOCON_PinMuxSet(IOCON, NEOPIXEL_PORT, NEOPIXEL_PIN, IOCON_PIO_DIG_FUNC4_EN);
-
-  sctpix_init(NEOPIXEL_TYPE);
-  sctpix_addCh(NEOPIXEL_CH, pixelData, NEOPIXEL_NUMBER);
-  sctpix_setPixel(NEOPIXEL_CH, 0, 0x100010);
-  sctpix_setPixel(NEOPIXEL_CH, 1, 0x100010);
-  sctpix_show();
-
-
-  // Button
-  /* PORT0 PIN5 configured as PIO0_5 */
-  IOCON_PinMuxSet(IOCON, BUTTON_PORT, BUTTON_PIN, IOCON_PIO_DIG_FUNC0_EN);
-
-  gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0};
-  GPIO_PinInit(GPIO, BUTTON_PORT, BUTTON_PIN, &button_config);
-
-  // UART
-  /* PORT0 PIN29 (coords: 92) is configured as FC0_RXD_SDA_MOSI_DATA */
-  IOCON_PinMuxSet(IOCON, 0U, 29U, IOCON_PIO_DIG_FUNC1_EN);
-  /* PORT0 PIN30 (coords: 94) is configured as FC0_TXD_SCL_MISO_WS */
-  IOCON_PinMuxSet(IOCON, 0U, 30U, IOCON_PIO_DIG_FUNC1_EN);
-
-#if defined(UART_DEV) && CFG_TUSB_DEBUG
-  // Enable UART when debug log is on
-  CLOCK_AttachClk(kFRO12M_to_FLEXCOMM0);
-  usart_config_t uart_config;
-  USART_GetDefaultConfig(&uart_config);
-  uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE;
-  uart_config.enableTx     = true;
-  uart_config.enableRx     = true;
-  USART_Init(UART_DEV, &uart_config, 12000000);
-#endif
-
-  // USB VBUS
-  /* PORT0 PIN22 configured as USB0_VBUS */
-  IOCON_PinMuxSet(IOCON, 0U, 22U, IOCON_PIO_DIG_FUNC7_EN);
-
-  // USB Controller
-  POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); /*Turn on USB0 Phy */
-  POWER_DisablePD(kPDRUNCFG_PD_USB1_PHY); /*< Turn on USB1 Phy */
-
-  /* reset the IP to make sure it's in reset state. */
-  RESET_PeripheralReset(kUSB0D_RST_SHIFT_RSTn);
-  RESET_PeripheralReset(kUSB0HSL_RST_SHIFT_RSTn);
-  RESET_PeripheralReset(kUSB0HMR_RST_SHIFT_RSTn);
-  RESET_PeripheralReset(kUSB1H_RST_SHIFT_RSTn);
-  RESET_PeripheralReset(kUSB1D_RST_SHIFT_RSTn);
-  RESET_PeripheralReset(kUSB1_RST_SHIFT_RSTn);
-  RESET_PeripheralReset(kUSB1RAM_RST_SHIFT_RSTn);
-
-#if (defined CFG_TUSB_RHPORT1_MODE) && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE)
-  CLOCK_EnableClock(kCLOCK_Usbh1);
-  /* Put PHY powerdown under software control */
-  USBHSH->PORTMODE = USBHSH_PORTMODE_SW_PDCOM_MASK;
-  /* According to reference mannual, device mode setting has to be set by access usb host register */
-  USBHSH->PORTMODE |= USBHSH_PORTMODE_DEV_ENABLE_MASK;
-  /* enable usb1 host clock */
-  CLOCK_DisableClock(kCLOCK_Usbh1);
-#endif
-
-#if (defined CFG_TUSB_RHPORT0_MODE) && (CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE)
-  // Enable USB Clock Adjustments to trim the FRO for the full speed controller
-  ANACTRL->FRO192M_CTRL |= ANACTRL_FRO192M_CTRL_USBCLKADJ_MASK;
-  CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false);
-  CLOCK_AttachClk(kFRO_HF_to_USB0_CLK);
-  /* enable usb0 host clock */
-  CLOCK_EnableClock(kCLOCK_Usbhsl0);
-  /*According to reference mannual, device mode setting has to be set by access usb host register */
-  USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK;
-  /* disable usb0 host clock */
-  CLOCK_DisableClock(kCLOCK_Usbhsl0);
-  CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbfsSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); /* enable USB Device clock */
-#endif
-
-}
-
-//--------------------------------------------------------------------+
-// Board porting API
-//--------------------------------------------------------------------+
-
-void board_led_write(bool state)
-{
-  GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
-  if (state) {
-    sctpix_setPixel(NEOPIXEL_CH, 0, 0x100000);
-    sctpix_setPixel(NEOPIXEL_CH, 1, 0x101010);
-  } else {
-    sctpix_setPixel(NEOPIXEL_CH, 0, 0x001000);
-    sctpix_setPixel(NEOPIXEL_CH, 1, 0x000010);
-  }
-  sctpix_show();
-}
-
-uint32_t board_button_read(void)
-{
-  // active low
-  return BUTTON_STATE_ACTIVE == GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN);
-}
-
-int board_uart_read(uint8_t* buf, int len)
-{
-  (void) buf; (void) len;
-  return 0;
-}
-
-int board_uart_write(void const * buf, int len)
-{
-  (void) buf; (void) len;
-  return 0;
-}
-
-#if CFG_TUSB_OS == OPT_OS_NONE
-volatile uint32_t system_ticks = 0;
-void SysTick_Handler(void)
-{
-  system_ticks++;
-}
-
-uint32_t board_millis(void)
-{
-  return system_ticks;
-}
-#endif