Merge pull request #2672 from tinic/master

Add support for STM32U535xx/STM32U545xx

9 files changed, 172 insertions, 7 deletions

diff --git a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.cmake b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.cmake
new file mode 100644
index 000000000..d42501948
--- /dev/null
+++ b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.cmake
@@ -0,0 +1,8 @@
+set(MCU_VARIANT stm32u545xx)
+set(JLINK_DEVICE stm32u545re)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32U545xx
+    )
+endfunction()
diff --git a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h
new file mode 100644
index 000000000..7f3bf462c
--- /dev/null
+++ b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h
@@ -0,0 +1,112 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+// LED GREEN
+#define LED_PORT GPIOA
+#define LED_PIN GPIO_PIN_5
+#define LED_STATE_ON 1
+
+// BUTTON
+#define BUTTON_PORT GPIOC
+#define BUTTON_PIN GPIO_PIN_13
+#define BUTTON_STATE_ACTIVE 1
+
+// UART Enable for STLink VCOM
+#define UART_DEV LPUART1
+#define UART_CLK_EN __HAL_RCC_LPUART1_CLK_ENABLE
+#define UART_GPIO_PORT GPIOA
+#define UART_GPIO_AF GPIO_AF8_LPUART1
+#define UART_TX_PIN GPIO_PIN_2
+#define UART_RX_PIN GPIO_PIN_3
+
+//--------------------------------------------------------------------+
+// RCC Clock
+//--------------------------------------------------------------------+
+
+static void SystemClock_Config(void) {
+  RCC_OscInitTypeDef RCC_OscInitStruct = { 0 };
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 };
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = { 0 };
+
+  /* Enable Power Clock */
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /** Configure the main internal regulator output voltage
+   */
+  HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+  /** Initializes the CPU, AHB and APB buses clocks
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSI;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
+  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+  RCC_OscInitStruct.PLL.PLLMBOOST = RCC_PLLMBOOST_DIV1;
+  RCC_OscInitStruct.PLL.PLLM = 1;
+  RCC_OscInitStruct.PLL.PLLN = 10;
+  RCC_OscInitStruct.PLL.PLLP = 2;
+  RCC_OscInitStruct.PLL.PLLQ = 2;
+  RCC_OscInitStruct.PLL.PLLR = 1;
+  RCC_OscInitStruct.PLL.PLLRGE = RCC_PLLVCIRANGE_1;
+  RCC_OscInitStruct.PLL.PLLFRACN = 0;
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_CLK48;
+  PeriphClkInit.IclkClockSelection = RCC_CLK48CLKSOURCE_HSI48;
+
+  HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
+
+  /** Initializes the CPU, AHB and APB buses clocks
+   */
+  RCC_ClkInitStruct.ClockType =
+      RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK3;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+  RCC_ClkInitStruct.APB3CLKDivider = RCC_HCLK_DIV1;
+
+  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4);
+}
+
+static void SystemPower_Config(void) {
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BOARD_H_ */
diff --git a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk
new file mode 100644
index 000000000..072c595fb
--- /dev/null
+++ b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk
@@ -0,0 +1,11 @@
+CFLAGS += \
+  -DSTM32U545xx \
+
+# All source paths should be relative to the top level.
+LD_FILE = ${FAMILY_PATH}/linker/STM32U545xx_FLASH.ld
+
+SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u545xx.s
+
+MCU_VARIANT = stm32u545xx
+# For flash-jlink target
+JLINK_DEVICE = stm32u545re
diff --git a/hw/bsp/stm32u5/boards/stm32u575eval/board.mk b/hw/bsp/stm32u5/boards/stm32u575eval/board.mk
index 922d67f83..fee56f2ba 100644
--- a/hw/bsp/stm32u5/boards/stm32u575eval/board.mk
+++ b/hw/bsp/stm32u5/boards/stm32u575eval/board.mk
@@ -6,5 +6,6 @@ LD_FILE = ${FAMILY_PATH}/linker/STM32U575xx_FLASH.ld
 
 SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s
 
+MCU_VARIANT = stm32u575xx
 # For flash-jlink target
 JLINK_DEVICE = stm32u575ai
diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk
index 1dd157a68..c83ec3999 100644
--- a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk
+++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk
@@ -6,5 +6,6 @@ LD_FILE = ${FAMILY_PATH}/linker/STM32U575xx_FLASH.ld
 
 SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s
 
+MCU_VARIANT = stm32u575xx
 # For flash-jlink target
 JLINK_DEVICE = stm32u575zi
diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk
index e759cec24..4bebe3330 100644
--- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk
+++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk
@@ -7,5 +7,6 @@ LD_FILE = ${BOARD_PATH}/STM32U5A5ZJTXQ_FLASH.ld
 
 SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u5a5xx.s
 
+MCU_VARIANT = stm32u5a5xx
 # For flash-jlink target
 JLINK_DEVICE = stm32u575zi
diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c
index d779b5c96..3cc7cc511 100644
--- a/hw/bsp/stm32u5/family.c
+++ b/hw/bsp/stm32u5/family.c
@@ -72,7 +72,9 @@ void board_init(void) {
   __HAL_RCC_GPIOC_CLK_ENABLE();
   __HAL_RCC_GPIOD_CLK_ENABLE();
   __HAL_RCC_GPIOE_CLK_ENABLE();
+#ifdef GPIOF
   __HAL_RCC_GPIOF_CLK_ENABLE();
+#endif
   __HAL_RCC_GPIOG_CLK_ENABLE();
   __HAL_RCC_GPIOH_CLK_ENABLE();
 
@@ -140,6 +142,17 @@ void board_init(void) {
   GPIO_InitStruct.Alternate = GPIO_AF10_USB;
   HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
+#ifdef USB_DRD_FS
+  // STM32U535/STM32U545
+
+  /* Enable USB power on Pwrctrl CR2 register */
+  HAL_PWREx_EnableVddUSB();
+
+  /* USB clock enable */
+  __HAL_RCC_USB_FS_CLK_ENABLE();
+
+#endif
+
 #ifdef USB_OTG_FS
   #if CFG_TUSB_OS == OPT_OS_FREERTOS
   // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
@@ -170,7 +183,9 @@ void board_init(void) {
   /* USB clock enable */
   __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
 
-#else
+#endif
+
+#ifdef USB_OTG_HS
   // STM59x/Ax/Fx/Gx only have 1 USB HS port
 
   #if CFG_TUSB_OS == OPT_OS_FREERTOS
diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake
index 7402540b7..f7a7aeb33 100644
--- a/hw/bsp/stm32u5/family.cmake
+++ b/hw/bsp/stm32u5/family.cmake
@@ -102,10 +102,16 @@ function(family_configure_example TARGET RTOS)
 
   # Add TinyUSB target and port source
   family_add_tinyusb(${TARGET} OPT_MCU_STM32U5 ${RTOS})
-  target_sources(${TARGET}-tinyusb PUBLIC
-    ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
-    #${TOP}/src/portable/st/typec/typec_stm32.c
-    )
+  if ((${MCU_VARIANT} STREQUAL "stm32u535xx") OR (${MCU_VARIANT} STREQUAL "stm32u545xx"))
+    target_sources(${TARGET}-tinyusb PUBLIC
+      ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
+      )
+  else ()
+    target_sources(${TARGET}-tinyusb PUBLIC
+      ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
+      #${TOP}/src/portable/st/typec/typec_stm32.c
+      )
+  endif ()
   target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
 
   # Link dependencies
diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk
index be5809340..89193b99f 100644
--- a/hw/bsp/stm32u5/family.mk
+++ b/hw/bsp/stm32u5/family.mk
@@ -27,18 +27,28 @@ LDFLAGS_GCC += \
   --specs=nosys.specs --specs=nano.specs
 
 SRC_C += \
-	src/portable/synopsys/dwc2/dcd_dwc2.c \
 	$(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \
-  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_icache.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_icache.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c
 
+ifeq ($(MCU_VARIANT),stm32u545xx)
+SRC_C += \
+	src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
+else ifeq ($(MCU_VARIANT),stm32u535xx)
+SRC_C += \
+	src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
+else
+SRC_C += \
+	src/portable/synopsys/dwc2/dcd_dwc2.c
+endif
+
 INC += \
 	$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
 	$(TOP)/$(ST_CMSIS)/Include \