Merge pull request #2317 from hathach/add-ra2a1-ek

add ra2a1 ek

12 files changed, 279 insertions, 9 deletions

diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c
index 912ca5f35..2029295dc 100644
--- a/hw/bsp/espressif/boards/family.c
+++ b/hw/bsp/espressif/boards/family.c
@@ -38,9 +38,7 @@
 #if ESP_IDF_VERSION_MAJOR > 4
   #include "esp_private/periph_ctrl.h"
 #else
-
   #include "driver/periph_ctrl.h"
-
 #endif
 
 // Note; current code use UART0 can cause device to reset while monitoring
@@ -48,18 +46,13 @@
 #define UART_ID  UART_NUM_0
 
 #ifdef NEOPIXEL_PIN
-
 #include "led_strip.h"
-
 static led_strip_t* strip;
 #endif
 
 #if CFG_TUH_ENABLED && CFG_TUH_MAX3421
-
 #include "driver/spi_master.h"
-
 static void max3421_init(void);
-
 #endif
 
 static void configure_pins(usb_hal_context_t* usb);
@@ -152,7 +145,10 @@ static void configure_pins(usb_hal_context_t* usb) {
   }
 }
 
-// Turn LED on or off
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+
 void board_led_write(bool state) {
 #ifdef NEOPIXEL_PIN
   strip->set_pixel(strip, 0, (state ? 0x88 : 0x00), 0x00, 0x00);
diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.cmake b/hw/bsp/ra/boards/ra2a1_ek/board.cmake
new file mode 100644
index 000000000..4d083ca98
--- /dev/null
+++ b/hw/bsp/ra/boards/ra2a1_ek/board.cmake
@@ -0,0 +1,10 @@
+set(CMAKE_SYSTEM_PROCESSOR cortex-m23 CACHE INTERNAL "System Processor")
+set(MCU_VARIANT ra2a1)
+
+set(JLINK_DEVICE R7FA2A1AB)
+
+function(update_board TARGET)
+#  target_compile_definitions(${TARGET} PUBLIC)
+#  target_sources(${TARGET} PRIVATE)
+#  target_include_directories(${BOARD_TARGET} PUBLIC)
+endfunction()
diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.h b/hw/bsp/ra/boards/ra2a1_ek/board.h
new file mode 100644
index 000000000..c132387bc
--- /dev/null
+++ b/hw/bsp/ra/boards/ra2a1_ek/board.h
@@ -0,0 +1,53 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED1          BSP_IO_PORT_01_PIN_06
+#define LED_STATE_ON  1
+
+#define SW1                   BSP_IO_PORT_01_PIN_05
+#define BUTTON_STATE_ACTIVE   0
+
+static const ioport_pin_cfg_t board_pin_cfg[] = {
+    {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT},
+    {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT},
+    // USB FS D+, D-, VBus
+    {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+    {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+    {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.mk b/hw/bsp/ra/boards/ra2a1_ek/board.mk
new file mode 100644
index 000000000..7a176418e
--- /dev/null
+++ b/hw/bsp/ra/boards/ra2a1_ek/board.mk
@@ -0,0 +1,7 @@
+CPU_CORE = cortex-m23
+MCU_VARIANT = ra2a1
+
+# For flash-jlink target
+JLINK_DEVICE = R7FA2A1AB
+
+flash: flash-jlink
diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h
new file mode 100644
index 000000000..30637c17b
--- /dev/null
+++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h
@@ -0,0 +1,62 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CFG_H_
+#define BSP_CFG_H_
+#ifdef __cplusplus
+            extern "C" {
+            #endif
+
+#include "bsp_clock_cfg.h"
+#include "bsp_mcu_family_cfg.h"
+#include "board_cfg.h"
+#define RA_NOT_DEFINED 0
+#ifndef BSP_CFG_RTOS
+#if (RA_NOT_DEFINED) != (RA_NOT_DEFINED)
+              #define BSP_CFG_RTOS (2)
+             #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED)
+              #define BSP_CFG_RTOS (1)
+             #else
+#define BSP_CFG_RTOS (0)
+#endif
+#endif
+#ifndef BSP_CFG_RTC_USED
+#define BSP_CFG_RTC_USED (RA_NOT_DEFINED)
+#endif
+#undef RA_NOT_DEFINED
+#if defined(_RA_BOOT_IMAGE)
+             #define BSP_CFG_BOOT_IMAGE (1)
+            #endif
+#define BSP_CFG_MCU_VCC_MV (3300)
+#define BSP_CFG_STACK_MAIN_BYTES (0x400)
+#define BSP_CFG_HEAP_BYTES (0x400)
+#define BSP_CFG_PARAM_CHECKING_ENABLE (1)
+#define BSP_CFG_ASSERT (0)
+#define BSP_CFG_ERROR_LOG (0)
+
+#define BSP_CFG_PFS_PROTECT ((1))
+
+#define BSP_CFG_C_RUNTIME_INIT ((1))
+#define BSP_CFG_EARLY_INIT     ((0))
+
+#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0))
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED
+#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1)
+#endif
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE
+#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE
+#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED
+#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS
+#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
+#endif
+
+#ifdef __cplusplus
+            }
+            #endif
+#endif /* BSP_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
new file mode 100644
index 000000000..eb82f4697
--- /dev/null
+++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
@@ -0,0 +1,5 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_CFG_H_
+#define BSP_MCU_DEVICE_CFG_H_
+#define BSP_CFG_MCU_PART_SERIES (2)
+#endif /* BSP_MCU_DEVICE_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
new file mode 100644
index 000000000..710e85b28
--- /dev/null
+++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
@@ -0,0 +1,11 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_R7FA2A1AB3CFM
+#define BSP_MCU_FEATURE_SET ('A')
+#define BSP_ROM_SIZE_BYTES (262144)
+#define BSP_RAM_SIZE_BYTES (32768)
+#define BSP_DATA_FLASH_SIZE_BYTES (8192)
+#define BSP_PACKAGE_LQFP
+#define BSP_PACKAGE_PINS (64)
+#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
new file mode 100644
index 000000000..6caef62cc
--- /dev/null
+++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
@@ -0,0 +1,84 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_FAMILY_CFG_H_
+#define BSP_MCU_FAMILY_CFG_H_
+#ifdef __cplusplus
+            extern "C" {
+            #endif
+
+#include "bsp_mcu_device_pn_cfg.h"
+#include "bsp_mcu_device_cfg.h"
+#include "../../../ra/fsp/src/bsp/mcu/ra2a1/bsp_mcu_info.h"
+#include "bsp_clock_cfg.h"
+#define BSP_MCU_GROUP_RA2A1 (1)
+#define BSP_LOCO_HZ                 (32768)
+#define BSP_MOCO_HZ                 (8000000)
+#define BSP_SUB_CLOCK_HZ            (32768)
+#if   BSP_CFG_HOCO_FREQUENCY == 0
+#define BSP_HOCO_HZ             (24000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 2
+                #define BSP_HOCO_HZ             (32000000)
+            #elif BSP_CFG_HOCO_FREQUENCY == 4
+                #define BSP_HOCO_HZ             (48000000)
+            #elif BSP_CFG_HOCO_FREQUENCY == 5
+                #define BSP_HOCO_HZ             (64000000)
+            #else
+                #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h"
+            #endif
+
+#define BSP_CORTEX_VECTOR_TABLE_ENTRIES    (16U)
+#define BSP_VECTOR_TABLE_MAX_ENTRIES       (48U)
+
+#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2)
+#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10)
+#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17)
+#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26)
+#define OFS_SEQ5 (1 << 28) | (1 << 30)
+#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0))
+#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5)
+#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8))
+#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_PC0_START (0x000FFFFC)
+#define BSP_CFG_ROM_REG_MPU_PC0_END (0x000FFFFF)
+#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_PC1_START (0x000FFFFC)
+#define BSP_CFG_ROM_REG_MPU_PC1_END (0x000FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x000FFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x000FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF)
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT
+#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9)
+#endif
+/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */
+#define BSP_PRV_IELS_ENUM(vector)    (ELC_ ## vector)
+
+/*
+ ID Code
+ Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings.
+ WARNING: This will disable debug access to the part and cannot be reversed by a debug probe.
+ */
+#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED)
+            #define BSP_CFG_ID_CODE_LONG_1 (0x00000000)
+            #define BSP_CFG_ID_CODE_LONG_2 (0x00000000)
+            #define BSP_CFG_ID_CODE_LONG_3 (0x00000000)
+            #define BSP_CFG_ID_CODE_LONG_4 (0x00000000)
+            #else
+/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */
+#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF)
+#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF)
+#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF)
+#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF)
+#endif
+
+#ifdef __cplusplus
+            }
+            #endif
+#endif /* BSP_MCU_FAMILY_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h
new file mode 100644
index 000000000..cd9d135f7
--- /dev/null
+++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h
@@ -0,0 +1,17 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CLOCK_CFG_H_
+#define BSP_CLOCK_CFG_H_
+#define BSP_CFG_CLOCKS_SECURE (0)
+#define BSP_CFG_CLOCKS_OVERRIDE (0)
+#define BSP_CFG_XTAL_HZ (12000000) /* XTAL 12000000Hz */
+#define BSP_CFG_HOCO_FREQUENCY (4) /* HOCO 48MHz */
+#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */
+#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */
+#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */
+#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */
+#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */
+#define BSP_CFG_SDADC_CLOCK_SOURCE (0) /* SDADCCLK Src: HOCO */
+#define BSP_CFG_SDADCCLK_DIV (7) /* SDADCCLK Div /12 */
+#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */
+#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */
+#endif /* BSP_CLOCK_CFG_H_ */
diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c
index fdf4c8666..16332be17 100644
--- a/hw/bsp/ra/family.c
+++ b/hw/bsp/ra/family.c
@@ -77,8 +77,11 @@ const fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] = {
 const bsp_interrupt_event_t g_interrupt_event_link_select[BSP_ICU_VECTOR_MAX_ENTRIES] = {
     [0] = BSP_PRV_IELS_ENUM(EVENT_USBFS_INT),            /* USBFS INT (USBFS interrupt) */
     [1] = BSP_PRV_IELS_ENUM(EVENT_USBFS_RESUME),         /* USBFS RESUME (USBFS resume interrupt) */
+
+#ifndef BSP_MCU_GROUP_RA2A1
     [2] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_0),         /* USBFS FIFO 0 (DMA transfer request 0) */
     [3] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_1),         /* USBFS FIFO 1 (DMA transfer request 1) */
+#endif
 
 #ifdef BOARD_HAS_USB_HIGHSPEED
     [4] = BSP_PRV_IELS_ENUM(EVENT_USBHS_USB_INT_RESUME), /* USBHS USB INT RESUME (USBHS interrupt) */
diff --git a/hw/bsp/ra/linker/gcc/ra2a1.ld b/hw/bsp/ra/linker/gcc/ra2a1.ld
new file mode 100644
index 000000000..218acbb2a
--- /dev/null
+++ b/hw/bsp/ra/linker/gcc/ra2a1.ld
@@ -0,0 +1,22 @@
+RAM_START = 0x20000000;
+RAM_LENGTH = 0x8000;
+FLASH_START = 0x00000000;
+FLASH_LENGTH = 0x40000;
+DATA_FLASH_START = 0x40100000;
+DATA_FLASH_LENGTH = 0x2000;
+OPTION_SETTING_START = 0x00000000;
+OPTION_SETTING_LENGTH = 0x0;
+OPTION_SETTING_S_START = 0x80000000;
+OPTION_SETTING_S_LENGTH = 0x0;
+ID_CODE_START = 0x01010018;
+ID_CODE_LENGTH = 0x20;
+SDRAM_START = 0x80010000;
+SDRAM_LENGTH = 0x0;
+QSPI_FLASH_START = 0x60000000;
+QSPI_FLASH_LENGTH = 0x0;
+OSPI_DEVICE_0_START = 0x80020000;
+OSPI_DEVICE_0_LENGTH = 0x0;
+OSPI_DEVICE_1_START = 0x80030000;
+OSPI_DEVICE_1_LENGTH = 0x0;
+
+INCLUDE fsp.ld
diff --git a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h
index 6a1f6c043..60aa739e2 100644
--- a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h
+++ b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h
@@ -59,7 +59,7 @@
 #define configTICK_RATE_HZ                      ( 1000 )
 #define configMAX_PRIORITIES                    ( 5 )
 #define configMINIMAL_STACK_SIZE                ( 128 )
-#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*8*1024 )
 #define configMAX_TASK_NAME_LEN                 16
 #define configUSE_16_BIT_TICKS                  0
 #define configIDLE_SHOULD_YIELD                 1