move all IAR to cmake

36 files changed, 916 insertions, 2410 deletions

diff --git a/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h
new file mode 100644
index 000000000..fc2f9fc67
--- /dev/null
+++ b/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h
@@ -0,0 +1,165 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+  #include "stm32f0xx.h"
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU                        0
+#define configENABLE_FPU                        1
+#define configENABLE_TRUSTZONE                  0
+#define configMINIMAL_SECURE_STACK_SIZE         (1024)
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               2
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         0
+#define configSUPPORT_DYNAMIC_ALLOCATION        1
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configRECORD_STACK_HIGH_ADDRESS        1
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* Define to trap errors during development. */
+// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
+#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
+  #define configASSERT(_exp) \
+    do {\
+      if ( !(_exp) ) { \
+        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
+        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
+          taskDISABLE_INTERRUPTS(); \
+           __asm("BKPT #0\n"); \
+        }\
+      }\
+    } while(0)
+#else
+  #define configASSERT( x )
+#endif
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+
+// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
+#define configPRIO_BITS       2
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake
index 68a69586e..9f6a7f098 100644
--- a/hw/bsp/stm32f0/family.cmake
+++ b/hw/bsp/stm32f0/family.cmake
@@ -34,6 +34,11 @@ endif ()
 # only need to be built ONCE for all examples
 function(add_board_target BOARD_TARGET)
   if (NOT TARGET ${BOARD_TARGET})
+    # Startup & Linker script
+    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+    set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
+
     add_library(${BOARD_TARGET} STATIC
       ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
@@ -58,13 +63,6 @@ function(add_board_target BOARD_TARGET)
 
     update_board(${BOARD_TARGET})
 
-    # Startup
-    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
-
-    # Linker
-    set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
-
     if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
       target_link_options(${BOARD_TARGET} PUBLIC
         "LINKER:--script=${LD_FILE_GNU}"
diff --git a/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h
new file mode 100644
index 000000000..5a6b2300b
--- /dev/null
+++ b/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h
@@ -0,0 +1,165 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+  #include "stm32f1xx.h"
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU                        0
+#define configENABLE_FPU                        1
+#define configENABLE_TRUSTZONE                  0
+#define configMINIMAL_SECURE_STACK_SIZE         (1024)
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               2
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         0
+#define configSUPPORT_DYNAMIC_ALLOCATION        1
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configRECORD_STACK_HIGH_ADDRESS        1
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* Define to trap errors during development. */
+// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
+#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
+  #define configASSERT(_exp) \
+    do {\
+      if ( !(_exp) ) { \
+        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
+        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
+          taskDISABLE_INTERRUPTS(); \
+           __asm("BKPT #0\n"); \
+        }\
+      }\
+    } while(0)
+#else
+  #define configASSERT( x )
+#endif
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+
+// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
+#define configPRIO_BITS       4
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake
index d42da090d..ab46c9872 100644
--- a/hw/bsp/stm32f1/family.cmake
+++ b/hw/bsp/stm32f1/family.cmake
@@ -34,6 +34,10 @@ endif ()
 # only need to be built ONCE for all examples
 function(add_board_target BOARD_TARGET)
   if (NOT TARGET ${BOARD_TARGET})
+    # Startup & Linker script
+    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+
     add_library(${BOARD_TARGET} STATIC
       ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
@@ -57,10 +61,6 @@ function(add_board_target BOARD_TARGET)
 
     update_board(${BOARD_TARGET})
 
-    # Startup
-    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
-
     if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
       target_link_options(${BOARD_TARGET} PUBLIC
         "LINKER:--script=${LD_FILE_GNU}"
diff --git a/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h
new file mode 100644
index 000000000..815e567dd
--- /dev/null
+++ b/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h
@@ -0,0 +1,165 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+  #include "stm32f7xx.h"
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU                        0
+#define configENABLE_FPU                        1
+#define configENABLE_TRUSTZONE                  0
+#define configMINIMAL_SECURE_STACK_SIZE         (1024)
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               2
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         0
+#define configSUPPORT_DYNAMIC_ALLOCATION        1
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configRECORD_STACK_HIGH_ADDRESS        1
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* Define to trap errors during development. */
+// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
+#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
+  #define configASSERT(_exp) \
+    do {\
+      if ( !(_exp) ) { \
+        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
+        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
+          taskDISABLE_INTERRUPTS(); \
+           __asm("BKPT #0\n"); \
+        }\
+      }\
+    } while(0)
+#else
+  #define configASSERT( x )
+#endif
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+
+// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
+#define configPRIO_BITS       4
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
diff --git a/hw/bsp/stm32f7/boards/stlinkv3mini/board.cmake b/hw/bsp/stm32f7/boards/stlinkv3mini/board.cmake
new file mode 100644
index 000000000..378e736d4
--- /dev/null
+++ b/hw/bsp/stm32f7/boards/stlinkv3mini/board.cmake
@@ -0,0 +1,14 @@
+set(MCU_VARIANT stm32f723xx)
+set(JLINK_DEVICE stm32f723xx)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F723xE_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F723xx
+    HSE_VALUE=25000000
+    # default to PORT 1 High Speed
+    BOARD_TUD_RHPORT=1
+    BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
+    )
+endfunction()
diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake b/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake
new file mode 100644
index 000000000..dd3c35b00
--- /dev/null
+++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake
@@ -0,0 +1,14 @@
+set(MCU_VARIANT stm32f723xx)
+set(JLINK_DEVICE stm32f723ie)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F723xE_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F723xx
+    HSE_VALUE=25000000
+    # default to PORT 1 High Speed
+    BOARD_TUD_RHPORT=1
+    BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
+    )
+endfunction()
diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/boards/stm32f723disco/stm32f7xx_hal_conf.h
deleted file mode 100644
index 581f0e46a..000000000
--- a/hw/bsp/stm32f7/boards/stm32f723disco/stm32f7xx_hal_conf.h
+++ /dev/null
@@ -1,472 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f7xx_hal_conf.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F7xx_HAL_CONF_H
-#define __STM32F7xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED   */
-/* #define HAL_CAN_MODULE_ENABLED */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
-/* #define HAL_CEC_MODULE_ENABLED   */
-/* #define HAL_CRC_MODULE_ENABLED   */
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_DAC_MODULE_ENABLED   */
-/* #define HAL_DCMI_MODULE_ENABLED  */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED  */
-/* #define HAL_ETH_MODULE_ENABLED  */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED */
-/* #define HAL_NOR_MODULE_ENABLED */
-/* #define HAL_SRAM_MODULE_ENABLED */
-/* #define HAL_SDRAM_MODULE_ENABLED */
-/* #define HAL_HASH_MODULE_ENABLED   */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_I2C_MODULE_ENABLED */
-/* #define HAL_I2S_MODULE_ENABLED    */
-/* #define HAL_IWDG_MODULE_ENABLED  */
-/* #define HAL_LPTIM_MODULE_ENABLED */
-/* #define HAL_LTDC_MODULE_ENABLED  */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED    */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED    */
-/* #define HAL_RTC_MODULE_ENABLED */
-/* #define HAL_SAI_MODULE_ENABLED    */
-/* #define HAL_SD_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED */
-/* #define HAL_SPI_MODULE_ENABLED    */
-/* #define HAL_TIM_MODULE_ENABLED    */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED  */
-/* #define HAL_IRDA_MODULE_ENABLED  */
-/* #define HAL_SMARTCARD_MODULE_ENABLED  */
-/* #define HAL_WWDG_MODULE_ENABLED   */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED */
-/* #define HAL_HCD_MODULE_ENABLED */
-/* #define HAL_DFSDM_MODULE_ENABLED */
-/* #define HAL_DSI_MODULE_ENABLED */
-/* #define HAL_JPEG_MODULE_ENABLED */
-/* #define HAL_MDIOS_MODULE_ENABLED */
-
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  ART_ACCLERATOR_ENABLE        1U /* To enable instruction cache and prefetch */
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_JPEG_REGISTER_CALLBACKS        0U /* JPEG register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MDIOS_REGISTER_CALLBACKS       0U /* MDIOS register callback disabled     */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1 */
-
-/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    ((uint32_t)5)       /* 5 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    ((uint32_t)5)       /* 5 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-/* LAN8742A PHY Address*/
-#define LAN8742A_PHY_ADDRESS            0x00
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 ((uint32_t)0x00000FFF)
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
-
-#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
-#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x1F)    /*!< PHY special control/ status register Offset     */
-
-#define PHY_SPEED_STATUS                ((uint16_t)0x0004)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0010)  /*!< PHY Duplex mask                                 */
-
-
-#define PHY_ISFR                        ((uint16_t)0x1D)    /*!< PHY Interrupt Source Flag register Offset       */
-#define PHY_ISFR_INT4                   ((uint16_t)0x0010)  /*!< PHY Link down inturrupt                         */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f7xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f7xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f7xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f7xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f7xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f7xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
-  #include "stm32f7xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f7xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f7xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f7xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f7xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f7xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f7xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f7xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f7xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f7xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f7xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f7xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f7xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f7xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f7xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f7xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f7xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f7xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f7xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f7xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f7xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f7xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f7xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f7xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f7xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f7xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f7xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f7xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f7xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f7xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f7xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_JPEG_MODULE_ENABLED
- #include "stm32f7xx_hal_jpeg.h"
-#endif /* HAL_JPEG_MODULE_ENABLED */
-
-#ifdef HAL_MDIOS_MODULE_ENABLED
- #include "stm32f7xx_hal_mdios.h"
-#endif /* HAL_MDIOS_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F7xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f7/boards/stm32f746disco/board.cmake b/hw/bsp/stm32f7/boards/stm32f746disco/board.cmake
new file mode 100644
index 000000000..e44c164b8
--- /dev/null
+++ b/hw/bsp/stm32f7/boards/stm32f746disco/board.cmake
@@ -0,0 +1,14 @@
+set(MCU_VARIANT stm32f746xx)
+set(JLINK_DEVICE stm32f746xx)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F746ZGTx_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F746xx
+    HSE_VALUE=25000000
+    # default to PORT 1 High Speed
+    BOARD_TUD_RHPORT=1
+    BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
+    )
+endfunction()
diff --git a/hw/bsp/stm32f7/boards/stm32f746disco/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/boards/stm32f746disco/stm32f7xx_hal_conf.h
deleted file mode 100644
index 03dec8f0d..000000000
--- a/hw/bsp/stm32f7/boards/stm32f746disco/stm32f7xx_hal_conf.h
+++ /dev/null
@@ -1,472 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f7xx_hal_conf.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F7xx_HAL_CONF_H
-#define __STM32F7xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED   */
-/* #define HAL_CAN_MODULE_ENABLED */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
-/* #define HAL_CEC_MODULE_ENABLED   */
-/* #define HAL_CRC_MODULE_ENABLED   */
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_DAC_MODULE_ENABLED   */
-/* #define HAL_DCMI_MODULE_ENABLED  */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED  */
-/* #define HAL_ETH_MODULE_ENABLED  */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED */
-/* #define HAL_NOR_MODULE_ENABLED */
-/* #define HAL_SRAM_MODULE_ENABLED */
-/* #define HAL_SDRAM_MODULE_ENABLED */
-/* #define HAL_HASH_MODULE_ENABLED   */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_I2C_MODULE_ENABLED */
-/* #define HAL_I2S_MODULE_ENABLED    */
-/* #define HAL_IWDG_MODULE_ENABLED  */
-/* #define HAL_LPTIM_MODULE_ENABLED */
-/* #define HAL_LTDC_MODULE_ENABLED  */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED    */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED    */
-/* #define HAL_RTC_MODULE_ENABLED */
-/* #define HAL_SAI_MODULE_ENABLED    */
-/* #define HAL_SD_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED */
-/* #define HAL_SPI_MODULE_ENABLED    */
-/* #define HAL_TIM_MODULE_ENABLED    */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED  */
-/* #define HAL_IRDA_MODULE_ENABLED  */
-/* #define HAL_SMARTCARD_MODULE_ENABLED  */
-/* #define HAL_WWDG_MODULE_ENABLED   */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED */
-/* #define HAL_HCD_MODULE_ENABLED */
-/* #define HAL_DFSDM_MODULE_ENABLED */
-/* #define HAL_DSI_MODULE_ENABLED */
-/* #define HAL_JPEG_MODULE_ENABLED */
-/* #define HAL_MDIOS_MODULE_ENABLED */
-
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  ART_ACCLERATOR_ENABLE        1U /* To enable instruction cache and prefetch */
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_JPEG_REGISTER_CALLBACKS        0U /* JPEG register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MDIOS_REGISTER_CALLBACKS       0U /* MDIOS register callback disabled     */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1 */
-
-/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    ((uint32_t)5)       /* 5 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    ((uint32_t)5)       /* 5 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-/* LAN8742A PHY Address*/
-#define LAN8742A_PHY_ADDRESS            0x00
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 ((uint32_t)0x00000FFF)
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
-
-#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
-#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x1F)    /*!< PHY special control/ status register Offset     */
-
-#define PHY_SPEED_STATUS                ((uint16_t)0x0004)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0010)  /*!< PHY Duplex mask                                 */
-
-
-#define PHY_ISFR                        ((uint16_t)0x1D)    /*!< PHY Interrupt Source Flag register Offset       */
-#define PHY_ISFR_INT4                   ((uint16_t)0x0010)  /*!< PHY Link down inturrupt                         */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f7xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f7xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f7xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f7xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f7xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f7xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
-  #include "stm32f7xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f7xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f7xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f7xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f7xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f7xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f7xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f7xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f7xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f7xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f7xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f7xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f7xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f7xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f7xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f7xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f7xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f7xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f7xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f7xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f7xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f7xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f7xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f7xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f7xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f7xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f7xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f7xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f7xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f7xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f7xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_JPEG_MODULE_ENABLED
- #include "stm32f7xx_hal_jpeg.h"
-#endif /* HAL_JPEG_MODULE_ENABLED */
-
-#ifdef HAL_MDIOS_MODULE_ENABLED
- #include "stm32f7xx_hal_mdios.h"
-#endif /* HAL_MDIOS_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F7xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.cmake b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.cmake
new file mode 100644
index 000000000..dd4d4a753
--- /dev/null
+++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.cmake
@@ -0,0 +1,13 @@
+set(MCU_VARIANT stm32f746xx)
+set(JLINK_DEVICE stm32f746xx)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F746ZGTx_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F746xx
+    HSE_VALUE=8000000
+    BOARD_TUD_RHPORT=0
+    BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED
+    )
+endfunction()
diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h
deleted file mode 100644
index 03dec8f0d..000000000
--- a/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h
+++ /dev/null
@@ -1,472 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f7xx_hal_conf.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F7xx_HAL_CONF_H
-#define __STM32F7xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED   */
-/* #define HAL_CAN_MODULE_ENABLED */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
-/* #define HAL_CEC_MODULE_ENABLED   */
-/* #define HAL_CRC_MODULE_ENABLED   */
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_DAC_MODULE_ENABLED   */
-/* #define HAL_DCMI_MODULE_ENABLED  */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED  */
-/* #define HAL_ETH_MODULE_ENABLED  */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED */
-/* #define HAL_NOR_MODULE_ENABLED */
-/* #define HAL_SRAM_MODULE_ENABLED */
-/* #define HAL_SDRAM_MODULE_ENABLED */
-/* #define HAL_HASH_MODULE_ENABLED   */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_I2C_MODULE_ENABLED */
-/* #define HAL_I2S_MODULE_ENABLED    */
-/* #define HAL_IWDG_MODULE_ENABLED  */
-/* #define HAL_LPTIM_MODULE_ENABLED */
-/* #define HAL_LTDC_MODULE_ENABLED  */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED    */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED    */
-/* #define HAL_RTC_MODULE_ENABLED */
-/* #define HAL_SAI_MODULE_ENABLED    */
-/* #define HAL_SD_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED */
-/* #define HAL_SPI_MODULE_ENABLED    */
-/* #define HAL_TIM_MODULE_ENABLED    */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED  */
-/* #define HAL_IRDA_MODULE_ENABLED  */
-/* #define HAL_SMARTCARD_MODULE_ENABLED  */
-/* #define HAL_WWDG_MODULE_ENABLED   */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED */
-/* #define HAL_HCD_MODULE_ENABLED */
-/* #define HAL_DFSDM_MODULE_ENABLED */
-/* #define HAL_DSI_MODULE_ENABLED */
-/* #define HAL_JPEG_MODULE_ENABLED */
-/* #define HAL_MDIOS_MODULE_ENABLED */
-
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  ART_ACCLERATOR_ENABLE        1U /* To enable instruction cache and prefetch */
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_JPEG_REGISTER_CALLBACKS        0U /* JPEG register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MDIOS_REGISTER_CALLBACKS       0U /* MDIOS register callback disabled     */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1 */
-
-/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    ((uint32_t)5)       /* 5 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    ((uint32_t)5)       /* 5 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-/* LAN8742A PHY Address*/
-#define LAN8742A_PHY_ADDRESS            0x00
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 ((uint32_t)0x00000FFF)
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
-
-#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
-#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x1F)    /*!< PHY special control/ status register Offset     */
-
-#define PHY_SPEED_STATUS                ((uint16_t)0x0004)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0010)  /*!< PHY Duplex mask                                 */
-
-
-#define PHY_ISFR                        ((uint16_t)0x1D)    /*!< PHY Interrupt Source Flag register Offset       */
-#define PHY_ISFR_INT4                   ((uint16_t)0x0010)  /*!< PHY Link down inturrupt                         */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f7xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f7xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f7xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f7xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f7xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f7xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
-  #include "stm32f7xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f7xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f7xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f7xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f7xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f7xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f7xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f7xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f7xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f7xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f7xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f7xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f7xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f7xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f7xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f7xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f7xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f7xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f7xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f7xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f7xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f7xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f7xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f7xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f7xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f7xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f7xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f7xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f7xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f7xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f7xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_JPEG_MODULE_ENABLED
- #include "stm32f7xx_hal_jpeg.h"
-#endif /* HAL_JPEG_MODULE_ENABLED */
-
-#ifdef HAL_MDIOS_MODULE_ENABLED
- #include "stm32f7xx_hal_mdios.h"
-#endif /* HAL_MDIOS_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F7xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.cmake b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.cmake
new file mode 100644
index 000000000..679a6ce87
--- /dev/null
+++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.cmake
@@ -0,0 +1,13 @@
+set(MCU_VARIANT stm32f767xx)
+set(JLINK_DEVICE stm32f767zi)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F767ZITx_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F767xx
+    HSE_VALUE=8000000
+    BOARD_TUD_RHPORT=0
+    BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED
+    )
+endfunction()
diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h
deleted file mode 100644
index 03dec8f0d..000000000
--- a/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h
+++ /dev/null
@@ -1,472 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f7xx_hal_conf.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F7xx_HAL_CONF_H
-#define __STM32F7xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED   */
-/* #define HAL_CAN_MODULE_ENABLED */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
-/* #define HAL_CEC_MODULE_ENABLED   */
-/* #define HAL_CRC_MODULE_ENABLED   */
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_DAC_MODULE_ENABLED   */
-/* #define HAL_DCMI_MODULE_ENABLED  */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED  */
-/* #define HAL_ETH_MODULE_ENABLED  */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED */
-/* #define HAL_NOR_MODULE_ENABLED */
-/* #define HAL_SRAM_MODULE_ENABLED */
-/* #define HAL_SDRAM_MODULE_ENABLED */
-/* #define HAL_HASH_MODULE_ENABLED   */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_I2C_MODULE_ENABLED */
-/* #define HAL_I2S_MODULE_ENABLED    */
-/* #define HAL_IWDG_MODULE_ENABLED  */
-/* #define HAL_LPTIM_MODULE_ENABLED */
-/* #define HAL_LTDC_MODULE_ENABLED  */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED    */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED    */
-/* #define HAL_RTC_MODULE_ENABLED */
-/* #define HAL_SAI_MODULE_ENABLED    */
-/* #define HAL_SD_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED */
-/* #define HAL_SPI_MODULE_ENABLED    */
-/* #define HAL_TIM_MODULE_ENABLED    */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED  */
-/* #define HAL_IRDA_MODULE_ENABLED  */
-/* #define HAL_SMARTCARD_MODULE_ENABLED  */
-/* #define HAL_WWDG_MODULE_ENABLED   */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED */
-/* #define HAL_HCD_MODULE_ENABLED */
-/* #define HAL_DFSDM_MODULE_ENABLED */
-/* #define HAL_DSI_MODULE_ENABLED */
-/* #define HAL_JPEG_MODULE_ENABLED */
-/* #define HAL_MDIOS_MODULE_ENABLED */
-
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  ART_ACCLERATOR_ENABLE        1U /* To enable instruction cache and prefetch */
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_JPEG_REGISTER_CALLBACKS        0U /* JPEG register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MDIOS_REGISTER_CALLBACKS       0U /* MDIOS register callback disabled     */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1 */
-
-/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    ((uint32_t)5)       /* 5 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    ((uint32_t)5)       /* 5 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-/* LAN8742A PHY Address*/
-#define LAN8742A_PHY_ADDRESS            0x00
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 ((uint32_t)0x00000FFF)
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
-
-#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
-#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x1F)    /*!< PHY special control/ status register Offset     */
-
-#define PHY_SPEED_STATUS                ((uint16_t)0x0004)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0010)  /*!< PHY Duplex mask                                 */
-
-
-#define PHY_ISFR                        ((uint16_t)0x1D)    /*!< PHY Interrupt Source Flag register Offset       */
-#define PHY_ISFR_INT4                   ((uint16_t)0x0010)  /*!< PHY Link down inturrupt                         */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f7xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f7xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f7xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f7xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f7xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f7xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
-  #include "stm32f7xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f7xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f7xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f7xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f7xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f7xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f7xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f7xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f7xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f7xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f7xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f7xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f7xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f7xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f7xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f7xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f7xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f7xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f7xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f7xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f7xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f7xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f7xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f7xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f7xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f7xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f7xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f7xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f7xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f7xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f7xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_JPEG_MODULE_ENABLED
- #include "stm32f7xx_hal_jpeg.h"
-#endif /* HAL_JPEG_MODULE_ENABLED */
-
-#ifdef HAL_MDIOS_MODULE_ENABLED
- #include "stm32f7xx_hal_mdios.h"
-#endif /* HAL_MDIOS_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F7xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f7/boards/stm32f769disco/board.cmake b/hw/bsp/stm32f7/boards/stm32f769disco/board.cmake
new file mode 100644
index 000000000..62a157c58
--- /dev/null
+++ b/hw/bsp/stm32f7/boards/stm32f769disco/board.cmake
@@ -0,0 +1,14 @@
+set(MCU_VARIANT stm32f769xx)
+set(JLINK_DEVICE stm32f769xx)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F769ZITx_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F769xx
+    HSE_VALUE=25000000
+    # default to PORT 1 High Speed
+    BOARD_TUD_RHPORT=1
+    BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
+    )
+endfunction()
diff --git a/hw/bsp/stm32f7/boards/stm32f769disco/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/boards/stm32f769disco/stm32f7xx_hal_conf.h
deleted file mode 100644
index 581f0e46a..000000000
--- a/hw/bsp/stm32f7/boards/stm32f769disco/stm32f7xx_hal_conf.h
+++ /dev/null
@@ -1,472 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f7xx_hal_conf.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F7xx_HAL_CONF_H
-#define __STM32F7xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED   */
-/* #define HAL_CAN_MODULE_ENABLED */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
-/* #define HAL_CEC_MODULE_ENABLED   */
-/* #define HAL_CRC_MODULE_ENABLED   */
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_DAC_MODULE_ENABLED   */
-/* #define HAL_DCMI_MODULE_ENABLED  */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED  */
-/* #define HAL_ETH_MODULE_ENABLED  */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED */
-/* #define HAL_NOR_MODULE_ENABLED */
-/* #define HAL_SRAM_MODULE_ENABLED */
-/* #define HAL_SDRAM_MODULE_ENABLED */
-/* #define HAL_HASH_MODULE_ENABLED   */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_I2C_MODULE_ENABLED */
-/* #define HAL_I2S_MODULE_ENABLED    */
-/* #define HAL_IWDG_MODULE_ENABLED  */
-/* #define HAL_LPTIM_MODULE_ENABLED */
-/* #define HAL_LTDC_MODULE_ENABLED  */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED    */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED    */
-/* #define HAL_RTC_MODULE_ENABLED */
-/* #define HAL_SAI_MODULE_ENABLED    */
-/* #define HAL_SD_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED */
-/* #define HAL_SPI_MODULE_ENABLED    */
-/* #define HAL_TIM_MODULE_ENABLED    */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED  */
-/* #define HAL_IRDA_MODULE_ENABLED  */
-/* #define HAL_SMARTCARD_MODULE_ENABLED  */
-/* #define HAL_WWDG_MODULE_ENABLED   */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED */
-/* #define HAL_HCD_MODULE_ENABLED */
-/* #define HAL_DFSDM_MODULE_ENABLED */
-/* #define HAL_DSI_MODULE_ENABLED */
-/* #define HAL_JPEG_MODULE_ENABLED */
-/* #define HAL_MDIOS_MODULE_ENABLED */
-
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  ART_ACCLERATOR_ENABLE        1U /* To enable instruction cache and prefetch */
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_JPEG_REGISTER_CALLBACKS        0U /* JPEG register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MDIOS_REGISTER_CALLBACKS       0U /* MDIOS register callback disabled     */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1 */
-
-/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    ((uint32_t)5)       /* 5 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    ((uint32_t)5)       /* 5 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-/* LAN8742A PHY Address*/
-#define LAN8742A_PHY_ADDRESS            0x00
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 ((uint32_t)0x00000FFF)
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
-
-#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
-#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x1F)    /*!< PHY special control/ status register Offset     */
-
-#define PHY_SPEED_STATUS                ((uint16_t)0x0004)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0010)  /*!< PHY Duplex mask                                 */
-
-
-#define PHY_ISFR                        ((uint16_t)0x1D)    /*!< PHY Interrupt Source Flag register Offset       */
-#define PHY_ISFR_INT4                   ((uint16_t)0x0010)  /*!< PHY Link down inturrupt                         */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f7xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f7xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f7xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f7xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f7xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f7xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
-  #include "stm32f7xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f7xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f7xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f7xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f7xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f7xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f7xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f7xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f7xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f7xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f7xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f7xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f7xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f7xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f7xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f7xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f7xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f7xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f7xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f7xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f7xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f7xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f7xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f7xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f7xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f7xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f7xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f7xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f7xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f7xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f7xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_JPEG_MODULE_ENABLED
- #include "stm32f7xx_hal_jpeg.h"
-#endif /* HAL_JPEG_MODULE_ENABLED */
-
-#ifdef HAL_MDIOS_MODULE_ENABLED
- #include "stm32f7xx_hal_mdios.h"
-#endif /* HAL_MDIOS_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F7xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f7/family.cmake b/hw/bsp/stm32f7/family.cmake
new file mode 100644
index 000000000..3b6ba1a15
--- /dev/null
+++ b/hw/bsp/stm32f7/family.cmake
@@ -0,0 +1,135 @@
+include_guard()
+
+if (NOT BOARD)
+  message(FATAL_ERROR "BOARD not specified")
+endif ()
+
+set(ST_FAMILY f7)
+set(ST_PREFIX stm32${ST_FAMILY}xx)
+
+set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver)
+set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY})
+set(CMSIS_5 ${TOP}/lib/CMSIS_5)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS STM32F7 CACHE INTERNAL "")
+
+# enable LTO if supported
+include(CheckIPOSupported)
+check_ipo_supported(RESULT IPO_SUPPORTED)
+if (IPO_SUPPORTED)
+  set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
+endif ()
+
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (NOT TARGET ${BOARD_TARGET})
+    # Startup & Linker script
+    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+    set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
+
+    add_library(${BOARD_TARGET} STATIC
+      ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c
+      ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+      )
+    target_include_directories(${BOARD_TARGET} PUBLIC
+      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+      ${CMSIS_5}/CMSIS/Core/Include
+      ${ST_CMSIS}/Include
+      ${ST_HAL_DRIVER}/Inc
+      )
+    target_compile_options(${BOARD_TARGET} PUBLIC
+      )
+    target_compile_definitions(${BOARD_TARGET} PUBLIC
+      )
+
+    update_board(${BOARD_TARGET})
+
+    if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--script=${LD_FILE_GNU}"
+        -nostartfiles
+        # nanolib
+        --specs=nosys.specs
+        --specs=nano.specs
+        )
+    elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--config=${LD_FILE_IAR}"
+        )
+    endif ()
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET)
+  family_configure_common(${TARGET})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_STM32F7)
+  target_sources(${TARGET}-tinyusb PUBLIC
+    ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
+    )
+  target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
+
+  # Flashing
+  family_flash_stlink(${TARGET})
+  family_flash_jlink(${TARGET})
+endfunction()
+
+
+function(family_configure_device_example TARGET)
+  family_configure_example(${TARGET})
+endfunction()
+
+function(family_configure_host_example TARGET)
+  family_configure_example(${TARGET})
+endfunction()
+
+function(family_configure_dual_usb_example TARGET)
+  family_configure_example(${TARGET})
+endfunction()
diff --git a/hw/bsp/stm32f7/boards/stlinkv3mini/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/stm32f7xx_hal_conf.h
index 581f0e46a..581f0e46a 100644
--- a/hw/bsp/stm32f7/boards/stlinkv3mini/stm32f7xx_hal_conf.h
+++ b/hw/bsp/stm32f7/stm32f7xx_hal_conf.h
diff --git a/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake b/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake
index 1ebf8a700..defeb0114 100644
--- a/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake
+++ b/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake
@@ -2,10 +2,6 @@
 set(JLINK_DEVICE STM32G0B1RE)
 
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32G0B1RETx_FLASH.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/stm32g0b1xx_flash.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_stm32g0b1xx.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_stm32g0b1xx.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake
index 1381eaa5f..fa93566bf 100644
--- a/hw/bsp/stm32g0/family.cmake
+++ b/hw/bsp/stm32g0/family.cmake
@@ -34,6 +34,11 @@ endif ()
 # only need to be built ONCE for all examples
 function(add_board_target BOARD_TARGET)
   if (NOT TARGET ${BOARD_TARGET})
+    # Startup & Linker script
+    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+    set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
+
     add_library(${BOARD_TARGET} STATIC
       ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
diff --git a/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake b/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake
index 9b72672ea..7a276b20d 100644
--- a/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake
+++ b/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake
@@ -2,10 +2,6 @@ set(MCU_VARIANT stm32g474xx)
 set(JLINK_DEVICE stm32g474re)
 
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32G474RETx_FLASH.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
diff --git a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake
index 88cd616b3..11c76863f 100644
--- a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake
+++ b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake
@@ -2,10 +2,6 @@ set(MCU_VARIANT stm32g474xx)
 set(JLINK_DEVICE stm32g474re)
 
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32G474RETx_FLASH.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake
index 45525c744..c89993f6d 100644
--- a/hw/bsp/stm32g4/family.cmake
+++ b/hw/bsp/stm32g4/family.cmake
@@ -34,6 +34,11 @@ endif ()
 # only need to be built ONCE for all examples
 function(add_board_target BOARD_TARGET)
   if (NOT TARGET ${BOARD_TARGET})
+    # Startup & Linker script
+    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+    set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
+
     add_library(${BOARD_TARGET} STATIC
       ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
diff --git a/hw/bsp/stm32h7/boards/daisyseed/board.cmake b/hw/bsp/stm32h7/boards/daisyseed/board.cmake
index 9fac51128..4811c97e8 100644
--- a/hw/bsp/stm32h7/boards/daisyseed/board.cmake
+++ b/hw/bsp/stm32h7/boards/daisyseed/board.cmake
@@ -2,10 +2,6 @@ set(MCU_VARIANT stm32h750xx)
 set(JLINK_DEVICE stm32h750ibk6_m7)
 
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/stm32h750ibkx_flash.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
diff --git a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake
index ac1acd346..b7d133dfa 100644
--- a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake
+++ b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake
@@ -2,10 +2,6 @@ set(MCU_VARIANT stm32h723xx)
 set(JLINK_DEVICE stm32h723zg)
 
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/${MCU_VARIANT}_flash.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake b/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake
index 2cd2a4bac..a28aa87bd 100644
--- a/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake
+++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake
@@ -2,10 +2,6 @@ set(MCU_VARIANT stm32h743xx)
 set(JLINK_DEVICE stm32h743xi)
 
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/${MCU_VARIANT}_flash.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake
index 9d5f09be4..f1532a95f 100644
--- a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake
+++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake
@@ -2,10 +2,6 @@ set(MCU_VARIANT stm32h743xx)
 set(JLINK_DEVICE stm32h743xi)
 
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/${MCU_VARIANT}_flash.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake b/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake
index 46744df49..f0e8bd70a 100644
--- a/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake
+++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake
@@ -2,10 +2,6 @@ set(MCU_VARIANT stm32h745xx)
 set(JLINK_DEVICE stm32h745xi_m7)
 
 set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash_CM7.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash_CM7.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake
index 033d3a9f2..83c8d4833 100644
--- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake
+++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake
@@ -2,10 +2,6 @@ set(MCU_VARIANT stm32h743xx)
 set(JLINK_DEVICE stm32h743xi)
 
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/${MCU_VARIANT}_flash.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake
index f04a768a5..8f161470e 100644
--- a/hw/bsp/stm32h7/family.cmake
+++ b/hw/bsp/stm32h7/family.cmake
@@ -34,6 +34,11 @@ endif ()
 # only need to be built ONCE for all examples
 function(add_board_target BOARD_TARGET)
   if (NOT TARGET ${BOARD_TARGET})
+    # Startup & Linker script
+    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+    set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
+
     add_library(${BOARD_TARGET} STATIC
       ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
diff --git a/hw/bsp/stm32l4/boards/stm32l412nucleo/board.cmake b/hw/bsp/stm32l4/boards/stm32l412nucleo/board.cmake
new file mode 100644
index 000000000..e979a7378
--- /dev/null
+++ b/hw/bsp/stm32l4/boards/stm32l412nucleo/board.cmake
@@ -0,0 +1,10 @@
+set(MCU_VARIANT stm32l412xx)
+set(JLINK_DEVICE stm32l412kb)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32L412KBUx_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32L412xx
+    )
+endfunction()
diff --git a/hw/bsp/stm32l4/boards/stm32l476disco/board.cmake b/hw/bsp/stm32l4/boards/stm32l476disco/board.cmake
new file mode 100644
index 000000000..4ade0a5c9
--- /dev/null
+++ b/hw/bsp/stm32l4/boards/stm32l476disco/board.cmake
@@ -0,0 +1,10 @@
+set(MCU_VARIANT stm32l476xx)
+set(JLINK_DEVICE stm32l476vg)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32L476VGTx_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32L476xx
+    )
+endfunction()
diff --git a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.cmake b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.cmake
new file mode 100644
index 000000000..ead241e32
--- /dev/null
+++ b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.cmake
@@ -0,0 +1,10 @@
+set(MCU_VARIANT stm32l4p5xx)
+set(JLINK_DEVICE stm32l4p5zg)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32L4P5ZGTX_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32L4P5xx
+    )
+endfunction()
diff --git a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.cmake b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.cmake
new file mode 100644
index 000000000..d4bbe6a94
--- /dev/null
+++ b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.cmake
@@ -0,0 +1,11 @@
+set(MCU_VARIANT stm32l4r5xx)
+set(JLINK_DEVICE stm32l4r5zi)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32L4RXxI_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32L4R5xx
+    HSE_VALUE=8000000
+    )
+endfunction()
diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake
new file mode 100644
index 000000000..d299b2568
--- /dev/null
+++ b/hw/bsp/stm32l4/family.cmake
@@ -0,0 +1,136 @@
+include_guard()
+
+if (NOT BOARD)
+  message(FATAL_ERROR "BOARD not specified")
+endif ()
+
+set(ST_FAMILY l4)
+set(ST_PREFIX stm32${ST_FAMILY}xx)
+
+set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver)
+set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY})
+set(CMSIS_5 ${TOP}/lib/CMSIS_5)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS STM32L4 CACHE INTERNAL "")
+
+# enable LTO if supported
+include(CheckIPOSupported)
+check_ipo_supported(RESULT IPO_SUPPORTED)
+if (IPO_SUPPORTED)
+  set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
+endif ()
+
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (NOT TARGET ${BOARD_TARGET})
+    # Startup & Linker script
+    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+    set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
+
+    add_library(${BOARD_TARGET} STATIC
+      ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c
+      ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+      )
+    target_include_directories(${BOARD_TARGET} PUBLIC
+      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+      ${CMSIS_5}/CMSIS/Core/Include
+      ${ST_CMSIS}/Include
+      ${ST_HAL_DRIVER}/Inc
+      )
+    target_compile_options(${BOARD_TARGET} PUBLIC
+      )
+    target_compile_definitions(${BOARD_TARGET} PUBLIC
+      )
+
+    update_board(${BOARD_TARGET})
+
+    if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--script=${LD_FILE_GNU}"
+        -nostartfiles
+        # nanolib
+        --specs=nosys.specs
+        --specs=nano.specs
+        )
+    elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--config=${LD_FILE_IAR}"
+        )
+    endif ()
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET)
+  family_configure_common(${TARGET})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_$(FAMILY_MCUS))
+  target_sources(${TARGET}-tinyusb PUBLIC
+    ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
+    ${TOP}/src/st/stm32_fsdev/dcd_stm32_fsdev.c
+    )
+  target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
+
+  # Flashing
+  family_flash_stlink(${TARGET})
+  family_flash_jlink(${TARGET})
+endfunction()
+
+
+function(family_configure_device_example TARGET)
+  family_configure_example(${TARGET})
+endfunction()
+
+function(family_configure_host_example TARGET)
+  family_configure_example(${TARGET})
+endfunction()
+
+function(family_configure_dual_usb_example TARGET)
+  family_configure_example(${TARGET})
+endfunction()
diff --git a/hw/bsp/stm32l4/family.mk b/hw/bsp/stm32l4/family.mk
index d492b9645..c16040887 100644
--- a/hw/bsp/stm32l4/family.mk
+++ b/hw/bsp/stm32l4/family.mk
@@ -32,11 +32,11 @@ SRC_C += \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_dma.c \
-	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
-	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \
-	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart_ex.c