diff options
| author | hathach <[email protected]> | 2020-07-02 11:58:40 +0700 |
|---|---|---|
| committer | hathach <[email protected]> | 2020-07-02 11:58:40 +0700 |
| commit | 9a290febcdd7aaa50657f3d31da31bd493fa3a0e (patch) | |
| tree | ca71d1f7bc855c0eed319630082825b5e2802633 /hw | |
| parent | 4966fb2e13ca2629763e76d82b67e531c3e20ede (diff) | |
change default port some stm bsp
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
Diffstat (limited to 'hw')
| -rw-r--r-- | hw/bsp/stlinkv3mini/board.mk | 12 | ||||
| -rw-r--r-- | hw/bsp/stm32f723disco/board.mk | 9 | ||||
| -rw-r--r-- | hw/bsp/stm32h743eval/board.mk | 13 |
3 files changed, 18 insertions, 16 deletions
diff --git a/hw/bsp/stlinkv3mini/board.mk b/hw/bsp/stlinkv3mini/board.mk index 8576eeaa8..1a64c3735 100644 --- a/hw/bsp/stlinkv3mini/board.mk +++ b/hw/bsp/stlinkv3mini/board.mk @@ -1,5 +1,3 @@ -PORT ?= 1 - CFLAGS += \ -flto \ -mthumb \ @@ -11,14 +9,8 @@ CFLAGS += \ -DSTM32F723xx \ -DHSE_VALUE=25000000 \ -DCFG_TUSB_MCU=OPT_MCU_STM32F7 \ - -DBOARD_DEVICE_RHPORT_NUM=$(PORT) - -ifeq ($(PORT), 1) -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED -$(info "PORT1 HS") -else -$(info "PORT0") -endif + -DBOARD_DEVICE_RHPORT_NUM=1 \ + -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED # mcu driver cause following warnings CFLAGS += -Wno-error=shadow -Wno-error=cast-align diff --git a/hw/bsp/stm32f723disco/board.mk b/hw/bsp/stm32f723disco/board.mk index 2bd3b0756..2cf3ac633 100644 --- a/hw/bsp/stm32f723disco/board.mk +++ b/hw/bsp/stm32f723disco/board.mk @@ -1,4 +1,5 @@ -PORT ?= 0 +# Default is Highspeed port +PORT ?= 1 CFLAGS += \ -flto \ @@ -14,10 +15,10 @@ CFLAGS += \ -DBOARD_DEVICE_RHPORT_NUM=$(PORT) ifeq ($(PORT), 1) -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED -$(info "PORT1 HS") + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + $(info "PORT1 High Speed") else -$(info "PORT0") + $(info "PORT0 Full Speed") endif # mcu driver cause following warnings diff --git a/hw/bsp/stm32h743eval/board.mk b/hw/bsp/stm32h743eval/board.mk index cbf37a95d..47d592c58 100644 --- a/hw/bsp/stm32h743eval/board.mk +++ b/hw/bsp/stm32h743eval/board.mk @@ -1,3 +1,6 @@ +# Default is Highspeed port +PORT ?= 1 + CFLAGS += \ -flto \ -mthumb \ @@ -8,8 +11,14 @@ CFLAGS += \ -nostdlib -nostartfiles \ -DSTM32H743xx \ -DCFG_TUSB_MCU=OPT_MCU_STM32H7 \ - -DBOARD_DEVICE_RHPORT_NUM=1 \ - -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + -DBOARD_DEVICE_RHPORT_NUM=$(PORT) + +ifeq ($(PORT), 1) + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + $(info "PORT1 High Speed") +else + $(info "PORT0 Full Speed") +endif # suppress warning caused by vendor mcu driver CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align |