Merge remote-tracking branch 'tinyusb/master' into samx7x_update

101 files changed, 227 insertions, 5079 deletions

diff --git a/hw/bsp/at32f402_405/family.c b/hw/bsp/at32f402_405/family.c
index a6c2217fe..b7dbcbd98 100644
--- a/hw/bsp/at32f402_405/family.c
+++ b/hw/bsp/at32f402_405/family.c
@@ -258,7 +258,7 @@ size_t board_get_unique_id(uint8_t id[], size_t max_len)
   {
     system_ticks++;
   }
-  uint32_t board_millis(void)
+  uint32_t tusb_time_millis_api(void)
   {
     return system_ticks;
   }
diff --git a/hw/bsp/at32f403a_407/family.c b/hw/bsp/at32f403a_407/family.c
index dd9b85dc5..d4a7e446d 100644
--- a/hw/bsp/at32f403a_407/family.c
+++ b/hw/bsp/at32f403a_407/family.c
@@ -250,7 +250,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/at32f413/family.c b/hw/bsp/at32f413/family.c
index bdaed523c..adf29e097 100644
--- a/hw/bsp/at32f413/family.c
+++ b/hw/bsp/at32f413/family.c
@@ -250,7 +250,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/at32f415/family.c b/hw/bsp/at32f415/family.c
index 2fbd4c821..b592bf6c5 100644
--- a/hw/bsp/at32f415/family.c
+++ b/hw/bsp/at32f415/family.c
@@ -246,7 +246,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/at32f423/family.c b/hw/bsp/at32f423/family.c
index f30c6a83f..71cb559dc 100644
--- a/hw/bsp/at32f423/family.c
+++ b/hw/bsp/at32f423/family.c
@@ -250,7 +250,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/at32f425/family.c b/hw/bsp/at32f425/family.c
index 4ff4c8d6a..7f443509e 100644
--- a/hw/bsp/at32f425/family.c
+++ b/hw/bsp/at32f425/family.c
@@ -254,7 +254,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/at32f435_437/family.c b/hw/bsp/at32f435_437/family.c
index 01dd429f8..6c6bc4d72 100644
--- a/hw/bsp/at32f435_437/family.c
+++ b/hw/bsp/at32f435_437/family.c
@@ -320,7 +320,7 @@ volatile uint32_t system_ticks = 0;
 void SysTick_Handler(void) {
   system_ticks++;
 }
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 void SVC_Handler(void) {
diff --git a/hw/bsp/at32f45x/family.c b/hw/bsp/at32f45x/family.c
index 0593e5115..fa0c1139f 100644
--- a/hw/bsp/at32f45x/family.c
+++ b/hw/bsp/at32f45x/family.c
@@ -227,7 +227,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/board.c b/hw/bsp/board.c
index 483d9dc28..71c209950 100644
--- a/hw/bsp/board.c
+++ b/hw/bsp/board.c
@@ -161,10 +161,6 @@ void board_putchar(int c) {
   (void) sys_write(0, (const char*)&c, 1);
 }
 
-uint32_t tusb_time_millis_api(void) {
-  return board_millis();
-}
-
 //--------------------------------------------------------------------
 // FreeRTOS hooks
 //--------------------------------------------------------------------
@@ -255,3 +251,53 @@ void vApplicationSetupTimerInterrupt(void) {
 #endif
 
 #endif
+
+//--------------------------------------------------------------------
+// ThreadX hooks for ARM Cortex-M
+//--------------------------------------------------------------------
+#if CFG_TUSB_OS == OPT_OS_THREADX && defined(__ARM_ARCH)
+
+#include "tx_api.h"
+#include "tx_initialize.h"
+
+// Newlib linker symbol: end of statically allocated RAM (start of heap)
+extern ULONG _end;
+
+// CMSIS standard variable for system clock frequency
+extern uint32_t SystemCoreClock;
+
+// Cortex-M SysTick registers (fixed addresses on all Cortex-M)
+#define _TX_SYST_CSR    (*((volatile uint32_t *)0xE000E010U))
+#define _TX_SYST_RVR    (*((volatile uint32_t *)0xE000E014U))
+#define _TX_SYST_CVR    (*((volatile uint32_t *)0xE000E018U))
+// SCB->SHP[10] = PendSV priority, [11] = SysTick priority (byte access at SCB base + 0xD22)
+#define _TX_SCB_SHPR3   (*((volatile uint32_t *)0xE000ED20U))
+
+VOID _tx_initialize_low_level(VOID) {
+  // Set the first available memory address for tx_application_define
+  _tx_initialize_unused_memory = (VOID *)(&_end);
+
+  // Configure SysTick for ThreadX tick rate: enable with processor clock + interrupt
+  _TX_SYST_RVR = (SystemCoreClock / TX_TIMER_TICKS_PER_SECOND) - 1u;
+  _TX_SYST_CVR = 0u;
+  _TX_SYST_CSR = 0x07u; // CLKSOURCE=1, TICKINT=1, ENABLE=1
+
+  // SHPR3 bits[31:24] = SysTick priority, bits[23:16] = PendSV priority
+  // PendSV must be lowest priority (0xFF). SysTick must be higher than PendSV (0x40)
+  // so SysTick can preempt the PendSV scheduler idle loop (__tx_ts_wait) to tick the timer.
+  _TX_SCB_SHPR3 = (_TX_SCB_SHPR3 & 0x0000FFFFU) | 0x40FF0000U;
+}
+
+// Weak callback for board-specific SysTick work (e.g. HAL_IncTick on STM32)
+void osal_threadx_tick_cb(void);
+TU_ATTR_WEAK void osal_threadx_tick_cb(void) { }
+
+// SysTick drives the ThreadX timer tick
+extern void _tx_timer_interrupt(void);
+void SysTick_Handler(void);
+void SysTick_Handler(void) {
+  osal_threadx_tick_cb();
+  _tx_timer_interrupt();
+}
+
+#endif
diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h
index 606ac484f..4487871eb 100644
--- a/hw/bsp/board_api.h
+++ b/hw/bsp/board_api.h
@@ -98,43 +98,6 @@ int board_uart_read(uint8_t *buf, int len);
 // Send characters to UART. Return number of sent bytes
 int board_uart_write(void const *buf, int len);
 
-#if CFG_TUSB_OS == OPT_OS_NONE
-// Get current milliseconds, must be implemented when no RTOS is used
-uint32_t board_millis(void);
-
-#elif CFG_TUSB_OS == OPT_OS_FREERTOS
-static inline uint32_t board_millis(void) {
-  return ( ( ((uint64_t) xTaskGetTickCount()) * 1000) / configTICK_RATE_HZ );
-}
-
-#elif CFG_TUSB_OS == OPT_OS_MYNEWT
-static inline uint32_t board_millis(void) {
-  return os_time_ticks_to_ms32( os_time_get() );
-}
-
-#elif CFG_TUSB_OS == OPT_OS_PICO
-#include "pico/time.h"
-static inline uint32_t board_millis(void) {
-  return to_ms_since_boot(get_absolute_time());
-}
-
-#elif CFG_TUSB_OS == OPT_OS_RTTHREAD
-static inline uint32_t board_millis(void) {
-  return (((uint64_t)rt_tick_get()) * 1000 / RT_TICK_PER_SECOND);
-}
-
-#elif CFG_TUSB_OS == OPT_OS_CUSTOM
-// Implement your own board_millis() in any of .c file
-uint32_t board_millis(void);
-
-#elif CFG_TUSB_OS == OPT_OS_ZEPHYR
-static inline uint32_t board_millis(void) {
-  return k_uptime_get_32();
-}
-#else
-  #error "board_millis() is not implemented for this OS"
-#endif
-
 //--------------------------------------------------------------------+
 // Helper functions
 //--------------------------------------------------------------------+
@@ -175,8 +138,8 @@ static inline size_t board_usb_get_serial(uint16_t desc_str1[], size_t max_chars
 
 // TODO remove
 static inline void board_delay(uint32_t ms) {
-  uint32_t start_ms = board_millis();
-  while ( board_millis() - start_ms < ms ) {
+  uint32_t start_ms = tusb_time_millis_api();
+  while ( tusb_time_millis_api() - start_ms < ms ) {
     // take chance to run usb background
     #if CFG_TUD_ENABLED
     tud_task();
diff --git a/hw/bsp/broadcom_32bit/family.c b/hw/bsp/broadcom_32bit/family.c
index f8f3b0b70..399397bb4 100644
--- a/hw/bsp/broadcom_32bit/family.c
+++ b/hw/bsp/broadcom_32bit/family.c
@@ -146,7 +146,7 @@ void TIMER_1_IRQHandler(void) {
   SYSTMR->CS_b.M1 = 1;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/broadcom_64bit/family.c b/hw/bsp/broadcom_64bit/family.c
index f8f3b0b70..399397bb4 100644
--- a/hw/bsp/broadcom_64bit/family.c
+++ b/hw/bsp/broadcom_64bit/family.c
@@ -146,7 +146,7 @@ void TIMER_1_IRQHandler(void) {
   SYSTMR->CS_b.M1 = 1;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/brtmm90x/family.c b/hw/bsp/brtmm90x/family.c
index 15ff4b8ee..ff24cfe89 100644
--- a/hw/bsp/brtmm90x/family.c
+++ b/hw/bsp/brtmm90x/family.c
@@ -234,7 +234,7 @@ int board_uart_write(void const *buf, int len)
 }
 
 // Get current milliseconds
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
     uint32_t safe_ms;
 
diff --git a/hw/bsp/ch32f20x/family.c b/hw/bsp/ch32f20x/family.c
index 7eae62fa4..dd84b7c77 100644
--- a/hw/bsp/ch32f20x/family.c
+++ b/hw/bsp/ch32f20x/family.c
@@ -101,7 +101,7 @@ void SysTick_Handler(void)
   system_ticks++;
 }
 
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
   return system_ticks;
 }
diff --git a/hw/bsp/ch32v10x/family.c b/hw/bsp/ch32v10x/family.c
index dfc041462..344dcaf0b 100644
--- a/hw/bsp/ch32v10x/family.c
+++ b/hw/bsp/ch32v10x/family.c
@@ -61,7 +61,7 @@ static uint32_t SysTick_Config(uint32_t ticks) {
   return 0;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/ch32v20x/family.c b/hw/bsp/ch32v20x/family.c
index 690acee1e..4c22450f9 100644
--- a/hw/bsp/ch32v20x/family.c
+++ b/hw/bsp/ch32v20x/family.c
@@ -85,7 +85,7 @@ static uint32_t SysTick_Config(uint32_t ticks) {
   return 0;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/ch32v30x/family.c b/hw/bsp/ch32v30x/family.c
index c694f1a08..6295f7723 100644
--- a/hw/bsp/ch32v30x/family.c
+++ b/hw/bsp/ch32v30x/family.c
@@ -144,7 +144,7 @@ __attribute__((interrupt)) void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/cxd56/family.c b/hw/bsp/cxd56/family.c
index a8e2fd52b..fd92bb9d9 100644
--- a/hw/bsp/cxd56/family.c
+++ b/hw/bsp/cxd56/family.c
@@ -96,7 +96,7 @@ int board_uart_write(void const *buf, int len)
 }
 
 // Get current milliseconds
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
   struct timespec tp;
 
diff --git a/hw/bsp/da1469x/family.c b/hw/bsp/da1469x/family.c
index a64ffce67..a4f7f2e8d 100644
--- a/hw/bsp/da1469x/family.c
+++ b/hw/bsp/da1469x/family.c
@@ -140,7 +140,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/efm32/family.c b/hw/bsp/efm32/family.c
index 39166bc4d..d318e20d6 100644
--- a/hw/bsp/efm32/family.c
+++ b/hw/bsp/efm32/family.c
@@ -689,7 +689,7 @@ void SysTick_Handler(void)
   system_ticks++;
 }
 
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
   return system_ticks;
 }
diff --git a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.cmake b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.cmake
index fe4db4fc1..455ca90a1 100644
--- a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.cmake
+++ b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.cmake
@@ -1,2 +1,3 @@
 # Apply board specific content here
 set(IDF_TARGET "esp32p4")
+list(APPEND SDKCONFIG_DEFAULTS "${CMAKE_CURRENT_LIST_DIR}/sdkconfig.defaults")
diff --git a/hw/bsp/espressif/boards/espressif_p4_function_ev/sdkconfig.defaults b/hw/bsp/espressif/boards/espressif_p4_function_ev/sdkconfig.defaults
new file mode 100644
index 000000000..6b0a548f6
--- /dev/null
+++ b/hw/bsp/espressif/boards/espressif_p4_function_ev/sdkconfig.defaults
@@ -0,0 +1,2 @@
+CONFIG_ESP32P4_SELECTS_REV_LESS_V3=y
+CONFIG_ESP32P4_REV_MIN_1=y
diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c
index a837417f4..04d8a4001 100644
--- a/hw/bsp/espressif/boards/family.c
+++ b/hw/bsp/espressif/boards/family.c
@@ -50,7 +50,7 @@ static void max3421_init(void);
 #endif
 
 #if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_ESP32H4, OPT_MCU_ESP32P4)
-static bool usb_init(void);
+static bool usb_init(uint8_t rhport, bool is_host);
 #endif
 
 //--------------------------------------------------------------------+
@@ -90,8 +90,14 @@ void board_init(void) {
   gpio_set_direction(BUTTON_PIN, GPIO_MODE_INPUT);
   gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY);
 
-#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_ESP32P4)
-  usb_init();
+#if CONFIG_USB_OTG_SUPPORTED
+  #if CFG_TUD_ENABLED
+  usb_init(BOARD_TUD_RHPORT, false);
+  #endif
+
+  #if CFG_TUH_ENABLED
+  usb_init(BOARD_TUH_RHPORT, true);
+  #endif
 #endif
 
 #ifdef HIL_TS3USB30_MODE_PIN
@@ -179,24 +185,30 @@ void board_reset_to_bootloader(void) {
 
 static usb_phy_handle_t phy_hdl;
 
-bool usb_init(void) {
+bool usb_init(uint8_t rhport, bool is_host) {
+  (void) rhport;
   // Configure USB PHY
   usb_phy_config_t phy_conf = {
     .controller = USB_PHY_CTRL_OTG,
+#if defined(CONFIG_SOC_USB_UTMI_PHY_NUM) && CONFIG_SOC_USB_UTMI_PHY_NUM > 0
+    .target = USB_PHY_TARGET_UTMI,
+#else
     .target = USB_PHY_TARGET_INT,
+#endif
 
     // maybe we can use USB_OTG_MODE_DEFAULT and switch using dwc2 driver
-#if CFG_TUD_ENABLED
-    .otg_mode = USB_OTG_MODE_DEVICE,
-#elif CFG_TUH_ENABLED
-    .otg_mode = USB_OTG_MODE_HOST,
-#endif
+    .otg_mode = is_host ? USB_OTG_MODE_HOST : USB_OTG_MODE_DEVICE,
     // https://github.com/hathach/tinyusb/issues/2943#issuecomment-2601888322
     // Set speed to undefined (auto-detect) to avoid timinng/racing issue with S3 with host such as macOS
     .otg_speed = USB_PHY_SPEED_UNDEFINED,
   };
 
-  usb_new_phy(&phy_conf, &phy_hdl);
+  esp_err_t const err = usb_new_phy(&phy_conf, &phy_hdl);
+  if (err != ESP_OK) {
+    printf("usb_new_phy failed: %s\r\n", esp_err_to_name(err));
+    phy_hdl = NULL;
+    return false;
+  }
 
   return true;
 }
@@ -351,5 +363,4 @@ bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx
   ESP_ERROR_CHECK(spi_device_transmit(max3421_spi, &xact));
   return true;
 }
-
 #endif
diff --git a/hw/bsp/f1c100s/family.c b/hw/bsp/f1c100s/family.c
index 9e864363f..1e71333d4 100644
--- a/hw/bsp/f1c100s/family.c
+++ b/hw/bsp/f1c100s/family.c
@@ -79,7 +79,7 @@ int board_uart_write(void const* buf, int len) {
 #if CFG_TUSB_OS == OPT_OS_NONE
 volatile uint32_t system_ticks = 0;
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake
index 699afda92..c166a0618 100644
--- a/hw/bsp/family_support.cmake
+++ b/hw/bsp/family_support.cmake
@@ -105,6 +105,12 @@ set(WARN_FLAGS_GNU
   )
 set(WARN_FLAGS_Clang ${WARN_FLAGS_GNU})
 
+set(WARN_FLAGS_IAR
+  --warnings_are_errors
+  --diag_suppress=Pa089
+  --diag_suppress=Pe236
+  )
+
 # Optimization
 if (NOT DEFINED CMAKE_BUILD_TYPE OR CMAKE_BUILD_TYPE STREQUAL "")
   set(CMAKE_BUILD_TYPE MinSizeRel CACHE STRING "Build type" FORCE)
@@ -380,6 +386,26 @@ function(family_add_rtos TARGET RTOS)
 
     target_link_libraries(${TARGET} PUBLIC freertos_kernel)
     target_compile_definitions(${TARGET} PUBLIC CFG_TUSB_OS=OPT_OS_FREERTOS)
+  elseif (RTOS STREQUAL "threadx")
+    if (NOT TARGET threadx)
+      # Derive THREADX_ARCH from CMAKE_SYSTEM_CPU if not explicitly set
+      if (NOT DEFINED THREADX_ARCH)
+        string(REPLACE "-" "_" THREADX_ARCH ${CMAKE_SYSTEM_CPU})
+      endif ()
+      # Derive THREADX_TOOLCHAIN from TOOLCHAIN if not explicitly set
+      if (NOT DEFINED THREADX_TOOLCHAIN)
+        if (TOOLCHAIN STREQUAL "iar")
+          set(THREADX_TOOLCHAIN "iar")
+        elseif (TOOLCHAIN STREQUAL "clang")
+          set(THREADX_TOOLCHAIN "ac6")
+        else ()
+          set(THREADX_TOOLCHAIN "gnu")
+        endif ()
+      endif ()
+      add_subdirectory(${TOP}/lib/threadx ${CMAKE_BINARY_DIR}/lib/threadx)
+    endif ()
+    target_link_libraries(${TARGET} PUBLIC threadx)
+    target_compile_definitions(${TARGET} PUBLIC CFG_TUSB_OS=OPT_OS_THREADX)
   elseif (RTOS STREQUAL "zephyr")
     target_compile_definitions(${TARGET} PUBLIC CFG_TUSB_OS=OPT_OS_ZEPHYR)
     target_include_directories(${TARGET} PUBLIC ${ZEPHYR_BASE}/include)
@@ -447,6 +473,7 @@ function(family_configure_common TARGET RTOS)
       target_link_options(${TARGET} PUBLIC "LINKER:--no-warn-rwx-segments")
     endif ()
   elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_compile_options(${TARGET} PRIVATE $<$<OR:$<COMPILE_LANGUAGE:C>,$<COMPILE_LANGUAGE:CXX>>:${WARN_FLAGS_IAR}>)
     target_link_options(${TARGET} PUBLIC "LINKER:--map=$<TARGET_FILE:${TARGET}>.map")
 
     if (IAR_CSTAT)
diff --git a/hw/bsp/fomu/family.c b/hw/bsp/fomu/family.c
index 9d7977bea..cf04a1f6f 100644
--- a/hw/bsp/fomu/family.c
+++ b/hw/bsp/fomu/family.c
@@ -117,7 +117,7 @@ int board_uart_write(void const * buf, int len)
 }
 
 #if CFG_TUSB_OS == OPT_OS_NONE
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
   return system_ticks;
 }
diff --git a/hw/bsp/gd32vf103/family.c b/hw/bsp/gd32vf103/family.c
index 9d15755fc..4c1099317 100644
--- a/hw/bsp/gd32vf103/family.c
+++ b/hw/bsp/gd32vf103/family.c
@@ -179,7 +179,7 @@ void eclic_mtip_handler(void) {
   system_ticks++;
   SysTick_Reload(TIMER_TICKS);
 }
-uint32_t board_millis(void) { return system_ticks; }
+uint32_t tusb_time_millis_api(void) { return system_ticks; }
 #endif
 
 #ifdef USE_FULL_ASSERT
diff --git a/hw/bsp/hpmicro/family.c b/hw/bsp/hpmicro/family.c
index ffec2523a..a80a8d913 100644
--- a/hw/bsp/hpmicro/family.c
+++ b/hw/bsp/hpmicro/family.c
@@ -108,7 +108,7 @@ int board_uart_write(void const *buf, int len) {
 
 #if CFG_TUSB_OS == OPT_OS_NONE
 // Get current milliseconds, must be implemented when no RTOS is used
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return (hpm_csr_get_core_cycle() / clock_get_core_clock_ticks_per_ms());
 }
 
diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c
index d54b41bdb..c1ee34b1a 100644
--- a/hw/bsp/imxrt/family.c
+++ b/hw/bsp/imxrt/family.c
@@ -239,7 +239,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/kinetis_k/family.c b/hw/bsp/kinetis_k/family.c
index 98ef52739..1505defe0 100644
--- a/hw/bsp/kinetis_k/family.c
+++ b/hw/bsp/kinetis_k/family.c
@@ -143,7 +143,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/kinetis_k32l2/family.c b/hw/bsp/kinetis_k32l2/family.c
index 2062b8b18..ec8dc6ecf 100644
--- a/hw/bsp/kinetis_k32l2/family.c
+++ b/hw/bsp/kinetis_k32l2/family.c
@@ -148,7 +148,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/kinetis_kl/family.c b/hw/bsp/kinetis_kl/family.c
index c257f4b2b..f89434d06 100644
--- a/hw/bsp/kinetis_kl/family.c
+++ b/hw/bsp/kinetis_kl/family.c
@@ -142,7 +142,7 @@ void SysTick_Handler(void)
   system_ticks++;
 }
 
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
   return system_ticks;
 }
diff --git a/hw/bsp/lpc11/family.c b/hw/bsp/lpc11/family.c
index c9f18bd2f..76c2bd17c 100644
--- a/hw/bsp/lpc11/family.c
+++ b/hw/bsp/lpc11/family.c
@@ -130,7 +130,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/lpc13/family.c b/hw/bsp/lpc13/family.c
index e212c6a63..8513f4df4 100644
--- a/hw/bsp/lpc13/family.c
+++ b/hw/bsp/lpc13/family.c
@@ -83,7 +83,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/lpc15/family.c b/hw/bsp/lpc15/family.c
index 5f22df175..0d092d3a9 100644
--- a/hw/bsp/lpc15/family.c
+++ b/hw/bsp/lpc15/family.c
@@ -140,7 +140,7 @@ void SysTick_Handler (void)
   system_ticks++;
 }
 
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
   return system_ticks;
 }
diff --git a/hw/bsp/lpc17/family.c b/hw/bsp/lpc17/family.c
index ba59fccca..f398f7e3c 100644
--- a/hw/bsp/lpc17/family.c
+++ b/hw/bsp/lpc17/family.c
@@ -145,7 +145,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/lpc18/family.c b/hw/bsp/lpc18/family.c
index 6c02c711f..2043cef99 100644
--- a/hw/bsp/lpc18/family.c
+++ b/hw/bsp/lpc18/family.c
@@ -143,7 +143,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/lpc40/family.c b/hw/bsp/lpc40/family.c
index 5ea95e9b8..237cd996b 100644
--- a/hw/bsp/lpc40/family.c
+++ b/hw/bsp/lpc40/family.c
@@ -156,7 +156,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/lpc43/family.c b/hw/bsp/lpc43/family.c
index f440fb119..56834a1b0 100644
--- a/hw/bsp/lpc43/family.c
+++ b/hw/bsp/lpc43/family.c
@@ -185,8 +185,10 @@ void board_init(void)
    */
   Chip_USB1_Init();
 
+#ifdef _BOARD_EA4357_H
   // USB0 Vbus Power: P2_3 on EA4357 channel B U20 GPIO26 active low (base board)
   Chip_SCU_PinMuxSet(2, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC7);
+#endif
 
   #if defined(BOARD_TUD_RHPORT) &&  BOARD_TUD_RHPORT == 0
     // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low.
@@ -257,7 +259,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/lpc51/family.c b/hw/bsp/lpc51/family.c
index bec86f87f..847972350 100644
--- a/hw/bsp/lpc51/family.c
+++ b/hw/bsp/lpc51/family.c
@@ -122,7 +122,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/lpc54/family.c b/hw/bsp/lpc54/family.c
index 7bb73afbc..945e27154 100644
--- a/hw/bsp/lpc54/family.c
+++ b/hw/bsp/lpc54/family.c
@@ -217,7 +217,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c
index ad0e502b5..7485ed4d5 100644
--- a/hw/bsp/lpc55/family.c
+++ b/hw/bsp/lpc55/family.c
@@ -350,7 +350,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/maxim/family.c b/hw/bsp/maxim/family.c
index 7ad7d6ff9..6ef4c12c1 100644
--- a/hw/bsp/maxim/family.c
+++ b/hw/bsp/maxim/family.c
@@ -202,7 +202,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/mcx/family.c b/hw/bsp/mcx/family.c
index 3b91678b1..a3969c217 100644
--- a/hw/bsp/mcx/family.c
+++ b/hw/bsp/mcx/family.c
@@ -219,7 +219,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/mm32/family.c b/hw/bsp/mm32/family.c
index 663c30818..330b01f6d 100644
--- a/hw/bsp/mm32/family.c
+++ b/hw/bsp/mm32/family.c
@@ -175,7 +175,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/msp430/family.c b/hw/bsp/msp430/family.c
index 390a9915e..413ad7db6 100644
--- a/hw/bsp/msp430/family.c
+++ b/hw/bsp/msp430/family.c
@@ -102,10 +102,10 @@ static void SystemClock_Config(void)
 
   // VUSB enabled automatically.
   // Wait two milliseconds to stabilize, per manual recommendation.
-  uint32_t ms_elapsed = board_millis();
+  uint32_t ms_elapsed = tusb_time_millis_api();
   do
   {
-    while((board_millis() - ms_elapsed) < 2);
+    while((tusb_time_millis_api() - ms_elapsed) < 2);
   }while(!(USBPWRCTL & USBBGVBV));
 
   // USB uses XT2 (4 MHz) directly. Enable the PLL.
@@ -113,11 +113,11 @@ static void SystemClock_Config(void)
   USBPLLCTL |= (UPFDEN | UPLLEN);
 
   // Wait until PLL locks. Check every 2ms, per manual.
-  ms_elapsed = board_millis();
+  ms_elapsed = tusb_time_millis_api();
   do
   {
     USBPLLIR &= ~USBOOLIFG;
-    while((board_millis() - ms_elapsed) < 2);
+    while((tusb_time_millis_api() - ms_elapsed) < 2);
   }while(USBPLLIR & USBOOLIFG);
 
   USBKEYPID = 0;
@@ -207,7 +207,7 @@ void TIMER0_A0_ISR (void) {
   // TAxCCR0 CCIFG resets itself as soon as interrupt is invoked.
 }
 
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
   uint32_t systick_mirror;
 
diff --git a/hw/bsp/msp432e4/family.c b/hw/bsp/msp432e4/family.c
index 0e1b0528a..90eb945f4 100644
--- a/hw/bsp/msp432e4/family.c
+++ b/hw/bsp/msp432e4/family.c
@@ -202,7 +202,7 @@ void SysTick_Handler(void)
   system_ticks++;
 }
 
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
   return system_ticks;
 }
diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c
index ee3ac61e2..04bfbf320 100644
--- a/hw/bsp/nrf/family.c
+++ b/hw/bsp/nrf/family.c
@@ -296,7 +296,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/nuc100_120/family.c b/hw/bsp/nuc100_120/family.c
index 752af2a56..cfe60121c 100644
--- a/hw/bsp/nuc100_120/family.c
+++ b/hw/bsp/nuc100_120/family.c
@@ -87,7 +87,7 @@ void SysTick_Handler (void)
   system_ticks++;
 }
 
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
   return system_ticks;
 }
diff --git a/hw/bsp/nuc121_125/family.c b/hw/bsp/nuc121_125/family.c
index 089855207..dce5b4d62 100644
--- a/hw/bsp/nuc121_125/family.c
+++ b/hw/bsp/nuc121_125/family.c
@@ -86,7 +86,7 @@ void SysTick_Handler (void)
   system_ticks++;
 }
 
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
   return system_ticks;
 }
diff --git a/hw/bsp/nuc126/family.c b/hw/bsp/nuc126/family.c
index f992fcab4..3343064e5 100644
--- a/hw/bsp/nuc126/family.c
+++ b/hw/bsp/nuc126/family.c
@@ -111,7 +111,7 @@ void SysTick_Handler (void)
   system_ticks++;
 }
 
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
   return system_ticks;
 }
diff --git a/hw/bsp/nuc505/family.c b/hw/bsp/nuc505/family.c
index 00ed92310..f1a77e4a5 100644
--- a/hw/bsp/nuc505/family.c
+++ b/hw/bsp/nuc505/family.c
@@ -88,7 +88,7 @@ void SysTick_Handler (void)
   system_ticks++;
 }
 
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
   return system_ticks;
 }
diff --git a/hw/bsp/pic32mz/family.c b/hw/bsp/pic32mz/family.c
index da97f67a9..2bfc876e1 100644
--- a/hw/bsp/pic32mz/family.c
+++ b/hw/bsp/pic32mz/family.c
@@ -106,7 +106,7 @@ TU_ATTR_WEAK int board_uart_write(void const * buf, int len)
 }
 
 #if CFG_TUSB_OS  == OPT_OS_NONE
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
   // COUNTER is system clock (200MHz / 2 = 100MHz) convert to ms)
   return _CP0_GET_COUNT() / (100000000 / 1000);
diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c
index 1f75b47c1..f371e694b 100644
--- a/hw/bsp/ra/family.c
+++ b/hw/bsp/ra/family.c
@@ -169,7 +169,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c
index a51b3f758..adb58449d 100644
--- a/hw/bsp/rp2040/family.c
+++ b/hw/bsp/rp2040/family.c
@@ -370,7 +370,7 @@ bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx
   }else if (rx_buf == NULL) {
     ret = spi_write_blocking(MAX3421_SPI, tx_buf, xfer_bytes);
   }else {
-    ret = spi_write_read_blocking(spi0, tx_buf, rx_buf, xfer_bytes);
+    ret = spi_write_read_blocking(MAX3421_SPI, tx_buf, rx_buf, xfer_bytes);
   }
 
   return ret == (int) xfer_bytes;
diff --git a/hw/bsp/rw61x/family.c b/hw/bsp/rw61x/family.c
index 265d5fcc0..fcc7fb262 100644
--- a/hw/bsp/rw61x/family.c
+++ b/hw/bsp/rw61x/family.c
@@ -128,7 +128,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/rx/boards/gr_citrus/gr_citrus.c b/hw/bsp/rx/boards/gr_citrus/gr_citrus.c
index 26ad4a6aa..e5b24bf69 100644
--- a/hw/bsp/rx/boards/gr_citrus/gr_citrus.c
+++ b/hw/bsp/rx/boards/gr_citrus/gr_citrus.c
@@ -248,7 +248,7 @@ void INT_Excep_CMT0_CMI0(void)
   ++system_ticks;
 }
 
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
   return system_ticks;
 }
diff --git a/hw/bsp/rx/boards/rx65n_target/rx65n_target.c b/hw/bsp/rx/boards/rx65n_target/rx65n_target.c
index 66a319541..d5c2de05a 100644
--- a/hw/bsp/rx/boards/rx65n_target/rx65n_target.c
+++ b/hw/bsp/rx/boards/rx65n_target/rx65n_target.c
@@ -299,7 +299,7 @@ void INT_Excep_CMT0_CMI0(void)
   ++system_ticks;
 }
 
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
   return system_ticks;
 }
diff --git a/hw/bsp/samd11/family.c b/hw/bsp/samd11/family.c
index 6cbf02412..bccbac8ea 100644
--- a/hw/bsp/samd11/family.c
+++ b/hw/bsp/samd11/family.c
@@ -155,7 +155,7 @@ void SysTick_Handler (void)
   system_ticks++;
 }
 
-uint32_t board_millis(void)
+uint32_t tusb_time_millis_api(void)
 {
   return system_ticks;
 }
diff --git a/hw/bsp/samd2x_l2x/family.c b/hw/bsp/samd2x_l2x/family.c
index a2dc8a8d4..737219b6c 100644
--- a/hw/bsp/samd2x_l2x/family.c
+++ b/hw/bsp/samd2x_l2x/family.c
@@ -361,7 +361,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/samd5x_e5x/family.c b/hw/bsp/samd5x_e5x/family.c
index 5a7105894..c008b9719 100644
--- a/hw/bsp/samd5x_e5x/family.c
+++ b/hw/bsp/samd5x_e5x/family.c
@@ -210,7 +210,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/same7x/family.c b/hw/bsp/same7x/family.c
index 6feefa3b5..ff6ecf277 100644
--- a/hw/bsp/same7x/family.c
+++ b/hw/bsp/same7x/family.c
@@ -192,7 +192,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/samg/family.c b/hw/bsp/samg/family.c
index 5c5fc3c14..b27134305 100644
--- a/hw/bsp/samg/family.c
+++ b/hw/bsp/samg/family.c
@@ -148,7 +148,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/stm32c0/family.c b/hw/bsp/stm32c0/family.c
index e2ba47f45..e20c0ee15 100644
--- a/hw/bsp/stm32c0/family.c
+++ b/hw/bsp/stm32c0/family.c
@@ -173,7 +173,7 @@ void SysTick_Handler(void) {
   HAL_IncTick();
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/stm32f0/family.c b/hw/bsp/stm32f0/family.c
index b99b0a8cc..5a35a3e50 100644
--- a/hw/bsp/stm32f0/family.c
+++ b/hw/bsp/stm32f0/family.c
@@ -160,7 +160,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/stm32f1/family.c b/hw/bsp/stm32f1/family.c
index 3147061cf..78a425453 100644
--- a/hw/bsp/stm32f1/family.c
+++ b/hw/bsp/stm32f1/family.c
@@ -148,12 +148,12 @@ void board_init(void) {
 #ifdef USB_CONNECT_PIN
 void dcd_disconnect(uint8_t rhport) {
   (void)rhport;
-  HAL_GPIO_WritePin(USB_CONNECT_PORT, USB_CONNECT_PIN, 1-USB_CONNECT_STATE);
+  HAL_GPIO_WritePin(USB_CONNECT_PORT, USB_CONNECT_PIN, (GPIO_PinState)(1 - USB_CONNECT_STATE));
 }
 
 void dcd_connect(uint8_t rhport) {
   (void)rhport;
-  HAL_GPIO_WritePin(USB_CONNECT_PORT, USB_CONNECT_PIN, USB_CONNECT_STATE);
+  HAL_GPIO_WritePin(USB_CONNECT_PORT, USB_CONNECT_PIN, (GPIO_PinState)USB_CONNECT_STATE);
 }
 #endif
 
@@ -202,7 +202,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/stm32f2/family.c b/hw/bsp/stm32f2/family.c
index f95128040..f1fd4ddb2 100644
--- a/hw/bsp/stm32f2/family.c
+++ b/hw/bsp/stm32f2/family.c
@@ -35,7 +35,7 @@
 // Forward USB interrupt events to TinyUSB IRQ Handler
 //--------------------------------------------------------------------+
 void OTG_FS_IRQHandler(void) {
-  tud_int_handler(0);
+  tusb_int_handler(0, true);
 }
 
 //--------------------------------------------------------------------+
@@ -145,7 +145,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/stm32f3/family.c b/hw/bsp/stm32f3/family.c
index 95bcc7882..fde1e9f6d 100644
--- a/hw/bsp/stm32f3/family.c
+++ b/hw/bsp/stm32f3/family.c
@@ -156,7 +156,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/feather_stm32f405/stm32f4xx_hal_conf.h
deleted file mode 100644
index b892df3b6..000000000
--- a/hw/bsp/stm32f4/boards/feather_stm32f405/stm32f4xx_hal_conf.h
+++ /dev/null
@@ -1,491 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_conf.h
-  * @brief   HAL configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_CONF_H
-#define __STM32F4xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-
-/* #define HAL_ADC_MODULE_ENABLED   */
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_CAN_MODULE_ENABLED   */
-/* #define HAL_CRC_MODULE_ENABLED   */
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_DAC_MODULE_ENABLED   */
-/* #define HAL_DCMI_MODULE_ENABLED   */
-/* #define HAL_DMA2D_MODULE_ENABLED   */
-/* #define HAL_ETH_MODULE_ENABLED   */
-/* #define HAL_NAND_MODULE_ENABLED   */
-/* #define HAL_NOR_MODULE_ENABLED   */
-/* #define HAL_PCCARD_MODULE_ENABLED   */
-/* #define HAL_SRAM_MODULE_ENABLED   */
-/* #define HAL_SDRAM_MODULE_ENABLED   */
-/* #define HAL_HASH_MODULE_ENABLED   */
-/* #define HAL_I2C_MODULE_ENABLED   */
-/* #define HAL_I2S_MODULE_ENABLED   */
-/* #define HAL_IWDG_MODULE_ENABLED   */
-/* #define HAL_LTDC_MODULE_ENABLED   */
-/* #define HAL_RNG_MODULE_ENABLED   */
-/* #define HAL_RTC_MODULE_ENABLED   */
-/* #define HAL_SAI_MODULE_ENABLED   */
-/* #define HAL_SD_MODULE_ENABLED   */
-/* #define HAL_MMC_MODULE_ENABLED   */
-/* #define HAL_SPI_MODULE_ENABLED   */
-/* #define HAL_TIM_MODULE_ENABLED   */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED   */
-/* #define HAL_IRDA_MODULE_ENABLED   */
-/* #define HAL_SMARTCARD_MODULE_ENABLED   */
-/* #define HAL_WWDG_MODULE_ENABLED   */
-#define HAL_PCD_MODULE_ENABLED
-/* #define HAL_HCD_MODULE_ENABLED   */
-/* #define HAL_DSI_MODULE_ENABLED   */
-/* #define HAL_QSPI_MODULE_ENABLED   */
-/* #define HAL_QSPI_MODULE_ENABLED   */
-/* #define HAL_CEC_MODULE_ENABLED   */
-/* #define HAL_FMPI2C_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED   */
-/* #define HAL_DFSDM_MODULE_ENABLED   */
-/* #define HAL_LPTIM_MODULE_ENABLED   */
-/* #define HAL_EXTI_MODULE_ENABLED   */
-#define HAL_GPIO_MODULE_ENABLED
-#define HAL_DMA_MODULE_ENABLED
-#define HAL_RCC_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
-#define HAL_PWR_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)12000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.*/
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE		      ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0U)   /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  INSTRUCTION_CACHE_ENABLE     1U
-#define  DATA_CACHE_ENABLE            1U
-
-/* Copied over manually- STM32Cube didn't generate these for some reason. */
-#define  USE_HAL_ADC_REGISTER_CALLBACKS     0U /* ADC register callback disabled     */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS     0U /* CEC register callback disabled     */
-#define  USE_HAL_COMP_REGISTER_CALLBACKS    0U /* COMP register callback disabled    */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS    0U /* CRYP register callback disabled    */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS     0U /* DAC register callback disabled     */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS    0U /* DCMI register callback disabled    */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS   0U /* DFSDM register callback disabled   */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS   0U /* DMA2D register callback disabled   */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS     0U /* DSI register callback disabled     */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS     0U /* ETH register callback disabled     */
-#define  USE_HAL_FDCAN_REGISTER_CALLBACKS   0U /* FDCAN register callback disabled   */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS    0U /* NAND register callback disabled    */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS     0U /* NOR register callback disabled     */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS   0U /* SDRAM register callback disabled   */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS    0U /* SRAM register callback disabled    */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS    0U /* HASH register callback disabled    */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS     0U /* HCD register callback disabled     */
-#define  USE_HAL_HRTIM_REGISTER_CALLBACKS   0U /* HRTIM register callback disabled   */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS     0U /* I2C register callback disabled     */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS     0U /* I2S register callback disabled     */
-#define  USE_HAL_JPEG_REGISTER_CALLBACKS    0U /* JPEG register callback disabled    */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS   0U /* LPTIM register callback disabled   */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS    0U /* LTDC register callback disabled    */
-#define  USE_HAL_MDIOS_REGISTER_CALLBACKS   0U /* MDIO register callback disabled    */
-#define  USE_HAL_OPAMP_REGISTER_CALLBACKS   0U /* MDIO register callback disabled    */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS     0U /* PCD register callback disabled     */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS    0U /* QSPI register callback disabled    */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS     0U /* RNG register callback disabled     */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS     0U /* RTC register callback disabled     */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS     0U /* SAI register callback disabled     */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS   0U /* SMBUS register callback disabled   */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS     0U /* SPI register callback disabled     */
-#define  USE_HAL_SWPMI_REGISTER_CALLBACKS   0U /* SWPMI register callback disabled   */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS     0U /* TIM register callback disabled     */
-#define  USE_HAL_UART_REGISTER_CALLBACKS    0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS   0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS    0U /* WWDG register callback disabled    */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1U */
-
-/* ################## Ethernet peripheral configuration ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    ((uint32_t)4U)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    ((uint32_t)4U)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-
-/* DP83848_PHY_ADDRESS Address*/
-#define DP83848_PHY_ADDRESS           0x01U
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 ((uint32_t)0x000000FFU)
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFFU)
-
-#define PHY_READ_TO                     ((uint32_t)0x0000FFFFU)
-#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFFU)
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x0000U)    /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x0001U)    /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000U)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000U)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100U)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000U)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100U)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000U)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000U)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200U)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800U)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400U)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020U)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004U)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002U)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-#define PHY_SR                          ((uint16_t)0x10U)    /*!< PHY status register Offset                      */
-
-#define PHY_SPEED_STATUS                ((uint16_t)0x0002U)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004U)  /*!< PHY Duplex mask                                 */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     0U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f4xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
-  #include "stm32f4xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f4xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f4xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f4xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f4xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f4xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f4xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f4xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f4xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f4xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f4xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f4xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f4xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_PCCARD_MODULE_ENABLED
-  #include "stm32f4xx_hal_pccard.h"
-#endif /* HAL_PCCARD_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f4xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f4xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f4xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f4xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f4xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f4xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f4xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f4xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f4xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_MMC_MODULE_ENABLED
- #include "stm32f4xx_hal_mmc.h"
-#endif /* HAL_MMC_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f4xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f4xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f4xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f4xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f4xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f4xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f4xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f4xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f4xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f4xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
- #include "stm32f4xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_FMPI2C_MODULE_ENABLED
- #include "stm32f4xx_hal_fmpi2c.h"
-#endif /* HAL_FMPI2C_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f4xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f4xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f4xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f4/boards/pyboardv11/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/pyboardv11/stm32f4xx_hal_conf.h
deleted file mode 100644
index b892df3b6..000000000
--- a/hw/bsp/stm32f4/boards/pyboardv11/stm32f4xx_hal_conf.h
+++ /dev/null
@@ -1,491 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_conf.h
-  * @brief   HAL configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_CONF_H
-#define __STM32F4xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-
-/* #define HAL_ADC_MODULE_ENABLED   */
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_CAN_MODULE_ENABLED   */
-/* #define HAL_CRC_MODULE_ENABLED   */
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_DAC_MODULE_ENABLED   */
-/* #define HAL_DCMI_MODULE_ENABLED   */
-/* #define HAL_DMA2D_MODULE_ENABLED   */
-/* #define HAL_ETH_MODULE_ENABLED   */
-/* #define HAL_NAND_MODULE_ENABLED   */
-/* #define HAL_NOR_MODULE_ENABLED   */
-/* #define HAL_PCCARD_MODULE_ENABLED   */
-/* #define HAL_SRAM_MODULE_ENABLED   */
-/* #define HAL_SDRAM_MODULE_ENABLED   */
-/* #define HAL_HASH_MODULE_ENABLED   */
-/* #define HAL_I2C_MODULE_ENABLED   */
-/* #define HAL_I2S_MODULE_ENABLED   */
-/* #define HAL_IWDG_MODULE_ENABLED   */
-/* #define HAL_LTDC_MODULE_ENABLED   */
-/* #define HAL_RNG_MODULE_ENABLED   */
-/* #define HAL_RTC_MODULE_ENABLED   */
-/* #define HAL_SAI_MODULE_ENABLED   */
-/* #define HAL_SD_MODULE_ENABLED   */
-/* #define HAL_MMC_MODULE_ENABLED   */
-/* #define HAL_SPI_MODULE_ENABLED   */
-/* #define HAL_TIM_MODULE_ENABLED   */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED   */
-/* #define HAL_IRDA_MODULE_ENABLED   */
-/* #define HAL_SMARTCARD_MODULE_ENABLED   */
-/* #define HAL_WWDG_MODULE_ENABLED   */
-#define HAL_PCD_MODULE_ENABLED
-/* #define HAL_HCD_MODULE_ENABLED   */
-/* #define HAL_DSI_MODULE_ENABLED   */
-/* #define HAL_QSPI_MODULE_ENABLED   */
-/* #define HAL_QSPI_MODULE_ENABLED   */
-/* #define HAL_CEC_MODULE_ENABLED   */
-/* #define HAL_FMPI2C_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED   */
-/* #define HAL_DFSDM_MODULE_ENABLED   */
-/* #define HAL_LPTIM_MODULE_ENABLED   */
-/* #define HAL_EXTI_MODULE_ENABLED   */
-#define HAL_GPIO_MODULE_ENABLED
-#define HAL_DMA_MODULE_ENABLED
-#define HAL_RCC_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
-#define HAL_PWR_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)12000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.*/
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE		      ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0U)   /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  INSTRUCTION_CACHE_ENABLE     1U
-#define  DATA_CACHE_ENABLE            1U
-
-/* Copied over manually- STM32Cube didn't generate these for some reason. */
-#define  USE_HAL_ADC_REGISTER_CALLBACKS     0U /* ADC register callback disabled     */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS     0U /* CEC register callback disabled     */
-#define  USE_HAL_COMP_REGISTER_CALLBACKS    0U /* COMP register callback disabled    */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS    0U /* CRYP register callback disabled    */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS     0U /* DAC register callback disabled     */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS    0U /* DCMI register callback disabled    */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS   0U /* DFSDM register callback disabled   */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS   0U /* DMA2D register callback disabled   */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS     0U /* DSI register callback disabled     */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS     0U /* ETH register callback disabled     */
-#define  USE_HAL_FDCAN_REGISTER_CALLBACKS   0U /* FDCAN register callback disabled   */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS    0U /* NAND register callback disabled    */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS     0U /* NOR register callback disabled     */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS   0U /* SDRAM register callback disabled   */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS    0U /* SRAM register callback disabled    */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS    0U /* HASH register callback disabled    */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS     0U /* HCD register callback disabled     */
-#define  USE_HAL_HRTIM_REGISTER_CALLBACKS   0U /* HRTIM register callback disabled   */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS     0U /* I2C register callback disabled     */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS     0U /* I2S register callback disabled     */
-#define  USE_HAL_JPEG_REGISTER_CALLBACKS    0U /* JPEG register callback disabled    */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS   0U /* LPTIM register callback disabled   */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS    0U /* LTDC register callback disabled    */
-#define  USE_HAL_MDIOS_REGISTER_CALLBACKS   0U /* MDIO register callback disabled    */
-#define  USE_HAL_OPAMP_REGISTER_CALLBACKS   0U /* MDIO register callback disabled    */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS     0U /* PCD register callback disabled     */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS    0U /* QSPI register callback disabled    */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS     0U /* RNG register callback disabled     */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS     0U /* RTC register callback disabled     */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS     0U /* SAI register callback disabled     */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS   0U /* SMBUS register callback disabled   */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS     0U /* SPI register callback disabled     */
-#define  USE_HAL_SWPMI_REGISTER_CALLBACKS   0U /* SWPMI register callback disabled   */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS     0U /* TIM register callback disabled     */
-#define  USE_HAL_UART_REGISTER_CALLBACKS    0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS   0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS    0U /* WWDG register callback disabled    */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1U */
-
-/* ################## Ethernet peripheral configuration ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    ((uint32_t)4U)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    ((uint32_t)4U)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-
-/* DP83848_PHY_ADDRESS Address*/
-#define DP83848_PHY_ADDRESS           0x01U
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 ((uint32_t)0x000000FFU)
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFFU)
-
-#define PHY_READ_TO                     ((uint32_t)0x0000FFFFU)
-#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFFU)
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x0000U)    /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x0001U)    /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000U)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000U)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100U)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000U)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100U)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000U)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000U)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200U)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800U)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400U)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020U)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004U)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002U)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-#define PHY_SR                          ((uint16_t)0x10U)    /*!< PHY status register Offset                      */
-
-#define PHY_SPEED_STATUS                ((uint16_t)0x0002U)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004U)  /*!< PHY Duplex mask                                 */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     0U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f4xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
-  #include "stm32f4xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f4xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f4xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f4xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f4xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f4xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f4xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f4xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f4xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f4xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f4xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f4xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f4xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_PCCARD_MODULE_ENABLED
-  #include "stm32f4xx_hal_pccard.h"
-#endif /* HAL_PCCARD_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f4xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f4xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f4xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f4xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f4xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f4xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f4xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f4xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f4xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_MMC_MODULE_ENABLED
- #include "stm32f4xx_hal_mmc.h"
-#endif /* HAL_MMC_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f4xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f4xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f4xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f4xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f4xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f4xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f4xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f4xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f4xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f4xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
- #include "stm32f4xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_FMPI2C_MODULE_ENABLED
- #include "stm32f4xx_hal_fmpi2c.h"
-#endif /* HAL_FMPI2C_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f4xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f4xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f4xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h
deleted file mode 100644
index 16f081cfb..000000000
--- a/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h
+++ /dev/null
@@ -1,493 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_conf_template.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_CONF_H
-#define __STM32F4xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED      */
-/* #define HAL_CAN_MODULE_ENABLED      */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED      */
-/* #define HAL_CRC_MODULE_ENABLED      */
-/* #define HAL_CEC_MODULE_ENABLED      */
-/* #define HAL_CRYP_MODULE_ENABLED     */
-/* #define HAL_DAC_MODULE_ENABLED      */
-/* #define HAL_DCMI_MODULE_ENABLED     */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED    */
-/* #define HAL_ETH_MODULE_ENABLED      */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED     */
-/* #define HAL_NOR_MODULE_ENABLED      */
-/* #define HAL_PCCARD_MODULE_ENABLED   */
-/* #define HAL_SRAM_MODULE_ENABLED     */
-/* #define HAL_SDRAM_MODULE_ENABLED    */
-/* #define HAL_HASH_MODULE_ENABLED     */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_EXTI_MODULE_ENABLED     */
-/* #define HAL_I2C_MODULE_ENABLED      */
-/* #define HAL_SMBUS_MODULE_ENABLED    */
-/* #define HAL_I2S_MODULE_ENABLED      */
-/* #define HAL_IWDG_MODULE_ENABLED     */
-/* #define HAL_LTDC_MODULE_ENABLED     */
-/* #define HAL_DSI_MODULE_ENABLED      */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED     */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED      */
-/* #define HAL_RTC_MODULE_ENABLED      */
-/* #define HAL_SAI_MODULE_ENABLED      */
-/* #define HAL_SD_MODULE_ENABLED       */
-// #define HAL_SPI_MODULE_ENABLED
-/* #define HAL_TIM_MODULE_ENABLED      */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED    */
-/* #define HAL_IRDA_MODULE_ENABLED     */
-/* #define HAL_SMARTCARD_MODULE_ENABLED */
-/* #define HAL_WWDG_MODULE_ENABLED     */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED      */
-/* #define HAL_HCD_MODULE_ENABLED      */
-/* #define HAL_FMPI2C_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED  */
-/* #define HAL_DFSDM_MODULE_ENABLED    */
-/* #define HAL_LPTIM_MODULE_ENABLED    */
-/* #define HAL_MMC_MODULE_ENABLED      */
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    (25000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    (16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  (32000U)
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  (32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    (5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    (12288000U) /*!< Value of the External oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            (0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  INSTRUCTION_CACHE_ENABLE     1U
-#define  DATA_CACHE_ENABLE            1U
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1U */
-
-/* ################## Ethernet peripheral configuration ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    4U                  /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-
-/* DP83848 PHY Address*/
-#define DP83848_PHY_ADDRESS             0x01U
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 0x000000FFU
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                0x00000FFFU
-
-#define PHY_READ_TO                     0x0000FFFFU
-#define PHY_WRITE_TO                    0x0000FFFFU
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */
-#define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */
-#define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */
-
-#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
-#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
-
-#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
-#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
-
-#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
-#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f4xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f4xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
-  #include "stm32f4xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f4xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f4xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f4xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f4xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f4xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f4xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f4xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f4xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f4xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f4xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f4xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f4xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_PCCARD_MODULE_ENABLED
-  #include "stm32f4xx_hal_pccard.h"
-#endif /* HAL_PCCARD_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f4xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f4xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_SMBUS_MODULE_ENABLED
- #include "stm32f4xx_hal_smbus.h"
-#endif /* HAL_SMBUS_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f4xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f4xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f4xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f4xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f4xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f4xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f4xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f4xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f4xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f4xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f4xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f4xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f4xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f4xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f4xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f4xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f4xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
- #include "stm32f4xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_FMPI2C_MODULE_ENABLED
- #include "stm32f4xx_hal_fmpi2c.h"
-#endif /* HAL_FMPI2C_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f4xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f4xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f4xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_MMC_MODULE_ENABLED
- #include "stm32f4xx_hal_mmc.h"
-#endif /* HAL_MMC_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f4/boards/stm32f407blackvet/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f407blackvet/stm32f4xx_hal_conf.h
deleted file mode 100644
index e24e782ea..000000000
--- a/hw/bsp/stm32f4/boards/stm32f407blackvet/stm32f4xx_hal_conf.h
+++ /dev/null
@@ -1,493 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_conf_template.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_CONF_H
-#define __STM32F4xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED      */
-/* #define HAL_CAN_MODULE_ENABLED      */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED      */
-/* #define HAL_CRC_MODULE_ENABLED      */
-/* #define HAL_CEC_MODULE_ENABLED      */
-/* #define HAL_CRYP_MODULE_ENABLED     */
-/* #define HAL_DAC_MODULE_ENABLED      */
-/* #define HAL_DCMI_MODULE_ENABLED     */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED    */
-/* #define HAL_ETH_MODULE_ENABLED      */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED     */
-/* #define HAL_NOR_MODULE_ENABLED      */
-/* #define HAL_PCCARD_MODULE_ENABLED   */
-/* #define HAL_SRAM_MODULE_ENABLED     */
-/* #define HAL_SDRAM_MODULE_ENABLED    */
-/* #define HAL_HASH_MODULE_ENABLED     */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_EXTI_MODULE_ENABLED     */
-/* #define HAL_I2C_MODULE_ENABLED      */
-/* #define HAL_SMBUS_MODULE_ENABLED    */
-/* #define HAL_I2S_MODULE_ENABLED      */
-/* #define HAL_IWDG_MODULE_ENABLED     */
-/* #define HAL_LTDC_MODULE_ENABLED     */
-/* #define HAL_DSI_MODULE_ENABLED      */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED     */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED      */
-/* #define HAL_RTC_MODULE_ENABLED      */
-/* #define HAL_SAI_MODULE_ENABLED      */
-/* #define HAL_SD_MODULE_ENABLED       */
-// #define HAL_SPI_MODULE_ENABLED
-/* #define HAL_TIM_MODULE_ENABLED      */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED    */
-/* #define HAL_IRDA_MODULE_ENABLED     */
-/* #define HAL_SMARTCARD_MODULE_ENABLED */
-/* #define HAL_WWDG_MODULE_ENABLED     */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED      */
-/* #define HAL_HCD_MODULE_ENABLED      */
-/* #define HAL_FMPI2C_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED  */
-/* #define HAL_DFSDM_MODULE_ENABLED    */
-/* #define HAL_LPTIM_MODULE_ENABLED    */
-/* #define HAL_MMC_MODULE_ENABLED      */
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    (8000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    (16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  (32000U)
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  (32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    (5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    (12288000U) /*!< Value of the External oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            (0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  INSTRUCTION_CACHE_ENABLE     1U
-#define  DATA_CACHE_ENABLE            1U
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1U */
-
-/* ################## Ethernet peripheral configuration ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    4U                  /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-
-/* DP83848 PHY Address*/
-#define DP83848_PHY_ADDRESS             0x01U
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 0x000000FFU
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                0x00000FFFU
-
-#define PHY_READ_TO                     0x0000FFFFU
-#define PHY_WRITE_TO                    0x0000FFFFU
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */
-#define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */
-#define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */
-
-#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
-#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
-
-#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
-#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
-
-#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
-#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f4xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f4xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
-  #include "stm32f4xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f4xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f4xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f4xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f4xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f4xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f4xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f4xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f4xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f4xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f4xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f4xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f4xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_PCCARD_MODULE_ENABLED
-  #include "stm32f4xx_hal_pccard.h"
-#endif /* HAL_PCCARD_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f4xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f4xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_SMBUS_MODULE_ENABLED
- #include "stm32f4xx_hal_smbus.h"
-#endif /* HAL_SMBUS_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f4xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f4xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f4xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f4xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f4xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f4xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f4xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f4xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f4xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f4xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f4xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f4xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f4xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f4xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f4xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f4xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f4xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
- #include "stm32f4xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_FMPI2C_MODULE_ENABLED
- #include "stm32f4xx_hal_fmpi2c.h"
-#endif /* HAL_FMPI2C_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f4xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f4xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f4xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_MMC_MODULE_ENABLED
- #include "stm32f4xx_hal_mmc.h"
-#endif /* HAL_MMC_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h
deleted file mode 100644
index e24e782ea..000000000
--- a/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h
+++ /dev/null
@@ -1,493 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_conf_template.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_CONF_H
-#define __STM32F4xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED      */
-/* #define HAL_CAN_MODULE_ENABLED      */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED      */
-/* #define HAL_CRC_MODULE_ENABLED      */
-/* #define HAL_CEC_MODULE_ENABLED      */
-/* #define HAL_CRYP_MODULE_ENABLED     */
-/* #define HAL_DAC_MODULE_ENABLED      */
-/* #define HAL_DCMI_MODULE_ENABLED     */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED    */
-/* #define HAL_ETH_MODULE_ENABLED      */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED     */
-/* #define HAL_NOR_MODULE_ENABLED      */
-/* #define HAL_PCCARD_MODULE_ENABLED   */
-/* #define HAL_SRAM_MODULE_ENABLED     */
-/* #define HAL_SDRAM_MODULE_ENABLED    */
-/* #define HAL_HASH_MODULE_ENABLED     */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_EXTI_MODULE_ENABLED     */
-/* #define HAL_I2C_MODULE_ENABLED      */
-/* #define HAL_SMBUS_MODULE_ENABLED    */
-/* #define HAL_I2S_MODULE_ENABLED      */
-/* #define HAL_IWDG_MODULE_ENABLED     */
-/* #define HAL_LTDC_MODULE_ENABLED     */
-/* #define HAL_DSI_MODULE_ENABLED      */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED     */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED      */
-/* #define HAL_RTC_MODULE_ENABLED      */
-/* #define HAL_SAI_MODULE_ENABLED      */
-/* #define HAL_SD_MODULE_ENABLED       */
-// #define HAL_SPI_MODULE_ENABLED
-/* #define HAL_TIM_MODULE_ENABLED      */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED    */
-/* #define HAL_IRDA_MODULE_ENABLED     */
-/* #define HAL_SMARTCARD_MODULE_ENABLED */
-/* #define HAL_WWDG_MODULE_ENABLED     */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED      */
-/* #define HAL_HCD_MODULE_ENABLED      */
-/* #define HAL_FMPI2C_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED  */
-/* #define HAL_DFSDM_MODULE_ENABLED    */
-/* #define HAL_LPTIM_MODULE_ENABLED    */
-/* #define HAL_MMC_MODULE_ENABLED      */
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    (8000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    (16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  (32000U)
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  (32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    (5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    (12288000U) /*!< Value of the External oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            (0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  INSTRUCTION_CACHE_ENABLE     1U
-#define  DATA_CACHE_ENABLE            1U
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1U */
-
-/* ################## Ethernet peripheral configuration ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    4U                  /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-
-/* DP83848 PHY Address*/
-#define DP83848_PHY_ADDRESS             0x01U
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 0x000000FFU
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                0x00000FFFU
-
-#define PHY_READ_TO                     0x0000FFFFU
-#define PHY_WRITE_TO                    0x0000FFFFU
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */
-#define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */
-#define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */
-
-#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
-#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
-
-#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
-#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
-
-#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
-#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f4xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f4xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
-  #include "stm32f4xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f4xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f4xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f4xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f4xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f4xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f4xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f4xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f4xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f4xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f4xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f4xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f4xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_PCCARD_MODULE_ENABLED
-  #include "stm32f4xx_hal_pccard.h"
-#endif /* HAL_PCCARD_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f4xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f4xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_SMBUS_MODULE_ENABLED
- #include "stm32f4xx_hal_smbus.h"
-#endif /* HAL_SMBUS_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f4xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f4xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f4xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f4xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f4xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f4xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f4xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f4xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f4xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f4xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f4xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f4xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f4xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f4xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f4xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f4xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f4xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
- #include "stm32f4xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_FMPI2C_MODULE_ENABLED
- #include "stm32f4xx_hal_fmpi2c.h"
-#endif /* HAL_FMPI2C_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f4xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f4xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f4xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_MMC_MODULE_ENABLED
- #include "stm32f4xx_hal_mmc.h"
-#endif /* HAL_MMC_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake
index d16db508f..f54807c2a 100644
--- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake
+++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake
@@ -6,5 +6,6 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F411CEUx_FLASH.ld)
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
     STM32F411xE
+    HSE_VALUE=25000000
     )
 endfunction()
diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk
index 7af7ca47c..c45aba79b 100644
--- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk
+++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk
@@ -1,4 +1,4 @@
-CFLAGS += -DSTM32F411xE
+CFLAGS += -DSTM32F411xE -DHSE_VALUE=25000000
 
 # GCC
 SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f411xe.s
diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h
deleted file mode 100644
index 16f081cfb..000000000
--- a/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h
+++ /dev/null
@@ -1,493 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_conf_template.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_CONF_H
-#define __STM32F4xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED      */
-/* #define HAL_CAN_MODULE_ENABLED      */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED      */
-/* #define HAL_CRC_MODULE_ENABLED      */
-/* #define HAL_CEC_MODULE_ENABLED      */
-/* #define HAL_CRYP_MODULE_ENABLED     */
-/* #define HAL_DAC_MODULE_ENABLED      */
-/* #define HAL_DCMI_MODULE_ENABLED     */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED    */
-/* #define HAL_ETH_MODULE_ENABLED      */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED     */
-/* #define HAL_NOR_MODULE_ENABLED      */
-/* #define HAL_PCCARD_MODULE_ENABLED   */
-/* #define HAL_SRAM_MODULE_ENABLED     */
-/* #define HAL_SDRAM_MODULE_ENABLED    */
-/* #define HAL_HASH_MODULE_ENABLED     */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_EXTI_MODULE_ENABLED     */
-/* #define HAL_I2C_MODULE_ENABLED      */
-/* #define HAL_SMBUS_MODULE_ENABLED    */
-/* #define HAL_I2S_MODULE_ENABLED      */
-/* #define HAL_IWDG_MODULE_ENABLED     */
-/* #define HAL_LTDC_MODULE_ENABLED     */
-/* #define HAL_DSI_MODULE_ENABLED      */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED     */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED      */
-/* #define HAL_RTC_MODULE_ENABLED      */
-/* #define HAL_SAI_MODULE_ENABLED      */
-/* #define HAL_SD_MODULE_ENABLED       */
-// #define HAL_SPI_MODULE_ENABLED
-/* #define HAL_TIM_MODULE_ENABLED      */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED    */
-/* #define HAL_IRDA_MODULE_ENABLED     */
-/* #define HAL_SMARTCARD_MODULE_ENABLED */
-/* #define HAL_WWDG_MODULE_ENABLED     */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED      */
-/* #define HAL_HCD_MODULE_ENABLED      */
-/* #define HAL_FMPI2C_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED  */
-/* #define HAL_DFSDM_MODULE_ENABLED    */
-/* #define HAL_LPTIM_MODULE_ENABLED    */
-/* #define HAL_MMC_MODULE_ENABLED      */
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    (25000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    (16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  (32000U)
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  (32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    (5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    (12288000U) /*!< Value of the External oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            (0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  INSTRUCTION_CACHE_ENABLE     1U
-#define  DATA_CACHE_ENABLE            1U
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1U */
-
-/* ################## Ethernet peripheral configuration ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    4U                  /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-
-/* DP83848 PHY Address*/
-#define DP83848_PHY_ADDRESS             0x01U
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 0x000000FFU
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                0x00000FFFU
-
-#define PHY_READ_TO                     0x0000FFFFU
-#define PHY_WRITE_TO                    0x0000FFFFU
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */
-#define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */
-#define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */
-
-#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
-#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
-
-#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
-#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
-
-#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
-#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f4xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f4xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
-  #include "stm32f4xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f4xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f4xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f4xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f4xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f4xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f4xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f4xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f4xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f4xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f4xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f4xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f4xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_PCCARD_MODULE_ENABLED
-  #include "stm32f4xx_hal_pccard.h"
-#endif /* HAL_PCCARD_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f4xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f4xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_SMBUS_MODULE_ENABLED
- #include "stm32f4xx_hal_smbus.h"
-#endif /* HAL_SMBUS_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f4xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f4xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f4xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f4xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f4xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f4xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f4xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f4xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f4xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f4xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f4xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f4xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f4xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f4xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f4xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f4xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f4xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
- #include "stm32f4xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_FMPI2C_MODULE_ENABLED
- #include "stm32f4xx_hal_fmpi2c.h"
-#endif /* HAL_FMPI2C_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f4xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f4xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f4xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_MMC_MODULE_ENABLED
- #include "stm32f4xx_hal_mmc.h"
-#endif /* HAL_MMC_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h
deleted file mode 100644
index e24e782ea..000000000
--- a/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h
+++ /dev/null
@@ -1,493 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_conf_template.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_CONF_H
-#define __STM32F4xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED      */
-/* #define HAL_CAN_MODULE_ENABLED      */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED      */
-/* #define HAL_CRC_MODULE_ENABLED      */
-/* #define HAL_CEC_MODULE_ENABLED      */
-/* #define HAL_CRYP_MODULE_ENABLED     */
-/* #define HAL_DAC_MODULE_ENABLED      */
-/* #define HAL_DCMI_MODULE_ENABLED     */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED    */
-/* #define HAL_ETH_MODULE_ENABLED      */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED     */
-/* #define HAL_NOR_MODULE_ENABLED      */
-/* #define HAL_PCCARD_MODULE_ENABLED   */
-/* #define HAL_SRAM_MODULE_ENABLED     */
-/* #define HAL_SDRAM_MODULE_ENABLED    */
-/* #define HAL_HASH_MODULE_ENABLED     */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_EXTI_MODULE_ENABLED     */
-/* #define HAL_I2C_MODULE_ENABLED      */
-/* #define HAL_SMBUS_MODULE_ENABLED    */
-/* #define HAL_I2S_MODULE_ENABLED      */
-/* #define HAL_IWDG_MODULE_ENABLED     */
-/* #define HAL_LTDC_MODULE_ENABLED     */
-/* #define HAL_DSI_MODULE_ENABLED      */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED     */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED      */
-/* #define HAL_RTC_MODULE_ENABLED      */
-/* #define HAL_SAI_MODULE_ENABLED      */
-/* #define HAL_SD_MODULE_ENABLED       */
-// #define HAL_SPI_MODULE_ENABLED
-/* #define HAL_TIM_MODULE_ENABLED      */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED    */
-/* #define HAL_IRDA_MODULE_ENABLED     */
-/* #define HAL_SMARTCARD_MODULE_ENABLED */
-/* #define HAL_WWDG_MODULE_ENABLED     */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED      */
-/* #define HAL_HCD_MODULE_ENABLED      */
-/* #define HAL_FMPI2C_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED  */
-/* #define HAL_DFSDM_MODULE_ENABLED    */
-/* #define HAL_LPTIM_MODULE_ENABLED    */
-/* #define HAL_MMC_MODULE_ENABLED      */
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    (8000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    (16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  (32000U)
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  (32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    (5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    (12288000U) /*!< Value of the External oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            (0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  INSTRUCTION_CACHE_ENABLE     1U
-#define  DATA_CACHE_ENABLE            1U
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1U */
-
-/* ################## Ethernet peripheral configuration ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    4U                  /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-
-/* DP83848 PHY Address*/
-#define DP83848_PHY_ADDRESS             0x01U
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 0x000000FFU
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                0x00000FFFU
-
-#define PHY_READ_TO                     0x0000FFFFU
-#define PHY_WRITE_TO                    0x0000FFFFU
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */
-#define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */
-#define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */
-
-#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
-#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
-
-#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
-#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
-
-#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
-#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f4xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f4xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
-  #include "stm32f4xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f4xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f4xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f4xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f4xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f4xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f4xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f4xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f4xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f4xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f4xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f4xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f4xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_PCCARD_MODULE_ENABLED
-  #include "stm32f4xx_hal_pccard.h"
-#endif /* HAL_PCCARD_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f4xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f4xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_SMBUS_MODULE_ENABLED
- #include "stm32f4xx_hal_smbus.h"
-#endif /* HAL_SMBUS_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f4xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f4xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f4xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f4xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f4xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f4xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f4xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f4xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f4xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f4xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f4xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f4xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f4xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f4xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f4xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f4xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f4xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
- #include "stm32f4xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_FMPI2C_MODULE_ENABLED
- #include "stm32f4xx_hal_fmpi2c.h"
-#endif /* HAL_FMPI2C_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f4xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f4xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f4xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_MMC_MODULE_ENABLED
- #include "stm32f4xx_hal_mmc.h"
-#endif /* HAL_MMC_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h
deleted file mode 100644
index e24e782ea..000000000
--- a/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h
+++ /dev/null
@@ -1,493 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_conf_template.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_CONF_H
-#define __STM32F4xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED      */
-/* #define HAL_CAN_MODULE_ENABLED      */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED      */
-/* #define HAL_CRC_MODULE_ENABLED      */
-/* #define HAL_CEC_MODULE_ENABLED      */
-/* #define HAL_CRYP_MODULE_ENABLED     */
-/* #define HAL_DAC_MODULE_ENABLED      */
-/* #define HAL_DCMI_MODULE_ENABLED     */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED    */
-/* #define HAL_ETH_MODULE_ENABLED      */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED     */
-/* #define HAL_NOR_MODULE_ENABLED      */
-/* #define HAL_PCCARD_MODULE_ENABLED   */
-/* #define HAL_SRAM_MODULE_ENABLED     */
-/* #define HAL_SDRAM_MODULE_ENABLED    */
-/* #define HAL_HASH_MODULE_ENABLED     */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_EXTI_MODULE_ENABLED     */
-/* #define HAL_I2C_MODULE_ENABLED      */
-/* #define HAL_SMBUS_MODULE_ENABLED    */
-/* #define HAL_I2S_MODULE_ENABLED      */
-/* #define HAL_IWDG_MODULE_ENABLED     */
-/* #define HAL_LTDC_MODULE_ENABLED     */
-/* #define HAL_DSI_MODULE_ENABLED      */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED     */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED      */
-/* #define HAL_RTC_MODULE_ENABLED      */
-/* #define HAL_SAI_MODULE_ENABLED      */
-/* #define HAL_SD_MODULE_ENABLED       */
-// #define HAL_SPI_MODULE_ENABLED
-/* #define HAL_TIM_MODULE_ENABLED      */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED    */
-/* #define HAL_IRDA_MODULE_ENABLED     */
-/* #define HAL_SMARTCARD_MODULE_ENABLED */
-/* #define HAL_WWDG_MODULE_ENABLED     */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED      */
-/* #define HAL_HCD_MODULE_ENABLED      */
-/* #define HAL_FMPI2C_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED  */
-/* #define HAL_DFSDM_MODULE_ENABLED    */
-/* #define HAL_LPTIM_MODULE_ENABLED    */
-/* #define HAL_MMC_MODULE_ENABLED      */
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    (8000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    (16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  (32000U)
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  (32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    (5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    (12288000U) /*!< Value of the External oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            (0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  INSTRUCTION_CACHE_ENABLE     1U
-#define  DATA_CACHE_ENABLE            1U
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1U */
-
-/* ################## Ethernet peripheral configuration ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    4U                  /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-
-/* DP83848 PHY Address*/
-#define DP83848_PHY_ADDRESS             0x01U
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 0x000000FFU
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                0x00000FFFU
-
-#define PHY_READ_TO                     0x0000FFFFU
-#define PHY_WRITE_TO                    0x0000FFFFU
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */
-#define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */
-#define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */
-
-#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
-#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
-
-#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
-#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
-
-#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
-#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f4xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f4xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
-  #include "stm32f4xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f4xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f4xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f4xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f4xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f4xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f4xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f4xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f4xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f4xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f4xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f4xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f4xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_PCCARD_MODULE_ENABLED
-  #include "stm32f4xx_hal_pccard.h"
-#endif /* HAL_PCCARD_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f4xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f4xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_SMBUS_MODULE_ENABLED
- #include "stm32f4xx_hal_smbus.h"
-#endif /* HAL_SMBUS_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f4xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f4xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f4xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f4xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f4xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f4xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f4xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f4xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f4xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f4xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f4xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f4xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f4xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f4xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f4xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f4xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f4xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
- #include "stm32f4xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_FMPI2C_MODULE_ENABLED
- #include "stm32f4xx_hal_fmpi2c.h"
-#endif /* HAL_FMPI2C_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f4xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f4xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f4xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_MMC_MODULE_ENABLED
- #include "stm32f4xx_hal_mmc.h"
-#endif /* HAL_MMC_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h
deleted file mode 100644
index e24e782ea..000000000
--- a/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h
+++ /dev/null
@@ -1,493 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_conf_template.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_CONF_H
-#define __STM32F4xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED      */
-/* #define HAL_CAN_MODULE_ENABLED      */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED      */
-/* #define HAL_CRC_MODULE_ENABLED      */
-/* #define HAL_CEC_MODULE_ENABLED      */
-/* #define HAL_CRYP_MODULE_ENABLED     */
-/* #define HAL_DAC_MODULE_ENABLED      */
-/* #define HAL_DCMI_MODULE_ENABLED     */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED    */
-/* #define HAL_ETH_MODULE_ENABLED      */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED     */
-/* #define HAL_NOR_MODULE_ENABLED      */
-/* #define HAL_PCCARD_MODULE_ENABLED   */
-/* #define HAL_SRAM_MODULE_ENABLED     */
-/* #define HAL_SDRAM_MODULE_ENABLED    */
-/* #define HAL_HASH_MODULE_ENABLED     */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_EXTI_MODULE_ENABLED     */
-/* #define HAL_I2C_MODULE_ENABLED      */
-/* #define HAL_SMBUS_MODULE_ENABLED    */
-/* #define HAL_I2S_MODULE_ENABLED      */
-/* #define HAL_IWDG_MODULE_ENABLED     */
-/* #define HAL_LTDC_MODULE_ENABLED     */
-/* #define HAL_DSI_MODULE_ENABLED      */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED     */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED      */
-/* #define HAL_RTC_MODULE_ENABLED      */
-/* #define HAL_SAI_MODULE_ENABLED      */
-/* #define HAL_SD_MODULE_ENABLED       */
-// #define HAL_SPI_MODULE_ENABLED
-/* #define HAL_TIM_MODULE_ENABLED      */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED    */
-/* #define HAL_IRDA_MODULE_ENABLED     */
-/* #define HAL_SMARTCARD_MODULE_ENABLED */
-/* #define HAL_WWDG_MODULE_ENABLED     */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED      */
-/* #define HAL_HCD_MODULE_ENABLED      */
-/* #define HAL_FMPI2C_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED  */
-/* #define HAL_DFSDM_MODULE_ENABLED    */
-/* #define HAL_LPTIM_MODULE_ENABLED    */
-/* #define HAL_MMC_MODULE_ENABLED      */
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    (8000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    (16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  (32000U)
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  (32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    (5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    (12288000U) /*!< Value of the External oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            (0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  INSTRUCTION_CACHE_ENABLE     1U
-#define  DATA_CACHE_ENABLE            1U
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1U */
-
-/* ################## Ethernet peripheral configuration ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    4U                  /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-
-/* DP83848 PHY Address*/
-#define DP83848_PHY_ADDRESS             0x01U
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 0x000000FFU
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                0x00000FFFU
-
-#define PHY_READ_TO                     0x0000FFFFU
-#define PHY_WRITE_TO                    0x0000FFFFU
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */
-#define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */
-#define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */
-
-#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
-#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
-
-#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
-#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
-
-#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
-#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f4xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f4xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
-  #include "stm32f4xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f4xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f4xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f4xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f4xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f4xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f4xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f4xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f4xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f4xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f4xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f4xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f4xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_PCCARD_MODULE_ENABLED
-  #include "stm32f4xx_hal_pccard.h"
-#endif /* HAL_PCCARD_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f4xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f4xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_SMBUS_MODULE_ENABLED
- #include "stm32f4xx_hal_smbus.h"
-#endif /* HAL_SMBUS_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f4xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f4xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f4xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f4xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f4xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f4xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f4xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f4xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f4xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f4xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f4xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f4xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f4xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f4xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f4xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f4xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f4xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
- #include "stm32f4xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_FMPI2C_MODULE_ENABLED
- #include "stm32f4xx_hal_fmpi2c.h"
-#endif /* HAL_FMPI2C_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f4xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f4xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f4xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_MMC_MODULE_ENABLED
- #include "stm32f4xx_hal_mmc.h"
-#endif /* HAL_MMC_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h
deleted file mode 100644
index 7bbd6b54f..000000000
--- a/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h
+++ /dev/null
@@ -1,486 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_conf_template.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_CONF_H
-#define __STM32F4xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED      */
-/* #define HAL_CAN_MODULE_ENABLED      */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED      */
-/* #define HAL_CRC_MODULE_ENABLED      */
-/* #define HAL_CEC_MODULE_ENABLED      */
-/* #define HAL_CRYP_MODULE_ENABLED     */
-/* #define HAL_DAC_MODULE_ENABLED      */
-/* #define HAL_DCMI_MODULE_ENABLED     */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED    */
-/* #define HAL_ETH_MODULE_ENABLED      */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED     */
-/* #define HAL_NOR_MODULE_ENABLED      */
-/* #define HAL_PCCARD_MODULE_ENABLED   */
-/* #define HAL_SRAM_MODULE_ENABLED     */
-/* #define HAL_SDRAM_MODULE_ENABLED    */
-/* #define HAL_HASH_MODULE_ENABLED     */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_EXTI_MODULE_ENABLED     */
-/* #define HAL_I2C_MODULE_ENABLED      */
-/* #define HAL_SMBUS_MODULE_ENABLED    */
-/* #define HAL_I2S_MODULE_ENABLED      */
-/* #define HAL_IWDG_MODULE_ENABLED     */
-/* #define HAL_LTDC_MODULE_ENABLED     */
-/* #define HAL_DSI_MODULE_ENABLED      */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED     */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED      */
-/* #define HAL_RTC_MODULE_ENABLED      */
-/* #define HAL_SAI_MODULE_ENABLED      */
-/* #define HAL_SD_MODULE_ENABLED       */
-// #define HAL_SPI_MODULE_ENABLED
-/* #define HAL_TIM_MODULE_ENABLED      */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED    */
-/* #define HAL_IRDA_MODULE_ENABLED     */
-/* #define HAL_SMARTCARD_MODULE_ENABLED */
-/* #define HAL_WWDG_MODULE_ENABLED     */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED      */
-/* #define HAL_HCD_MODULE_ENABLED      */
-/* #define HAL_FMPI2C_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED  */
-/* #define HAL_DFSDM_MODULE_ENABLED    */
-/* #define HAL_LPTIM_MODULE_ENABLED    */
-/* #define HAL_MMC_MODULE_ENABLED      */
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    (8000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    (16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  (32000U)
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  (32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    (5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    (12288000U) /*!< Value of the External oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            (0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  INSTRUCTION_CACHE_ENABLE     1U
-#define  DATA_CACHE_ENABLE            1U
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1U */
-
-/* ################## Ethernet peripheral configuration ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    4U       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    4U       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-
-/* LAN8742A_PHY_ADDRESS Address*/
-#define LAN8742A_PHY_ADDRESS           0U
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 0x000000FFU
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                0x00000FFFU
-
-#define PHY_READ_TO                     0x0000FFFFU
-#define PHY_WRITE_TO                    0x0000FFFFU
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x00U)    /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x01U)    /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000U)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000U)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100U)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000U)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100U)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000U)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000U)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200U)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800U)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400U)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020U)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004U)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002U)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-#define PHY_SR                          ((uint16_t)0x10U)    /*!< PHY status register Offset                      */
-
-#define PHY_SPEED_STATUS                ((uint16_t)0x0002U)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004U)  /*!< PHY Duplex mask                                 */
-
-#define PHY_ISFR                        ((uint16_t)0x001DU)    /*!< PHY Interrupt Source Flag register Offset   */
-#define PHY_ISFR_INT4                   ((uint16_t)0x000BU)  /*!< PHY Link down inturrupt       */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     0U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f4xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f4xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
-  #include "stm32f4xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f4xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f4xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f4xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f4xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f4xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f4xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f4xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f4xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f4xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f4xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f4xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f4xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f4xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_PCCARD_MODULE_ENABLED
-  #include "stm32f4xx_hal_pccard.h"
-#endif /* HAL_PCCARD_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f4xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f4xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f4xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_SMBUS_MODULE_ENABLED
- #include "stm32f4xx_hal_smbus.h"
-#endif /* HAL_SMBUS_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f4xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f4xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f4xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f4xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f4xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f4xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f4xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f4xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f4xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f4xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f4xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f4xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f4xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f4xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f4xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f4xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f4xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f4xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
- #include "stm32f4xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_FMPI2C_MODULE_ENABLED
- #include "stm32f4xx_hal_fmpi2c.h"
-#endif /* HAL_FMPI2C_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f4xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f4xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f4xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_MMC_MODULE_ENABLED
- #include "stm32f4xx_hal_mmc.h"
-#endif /* HAL_MMC_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f4/family.c b/hw/bsp/stm32f4/family.c
index f0e9620f2..665ea114a 100644
--- a/hw/bsp/stm32f4/family.c
+++ b/hw/bsp/stm32f4/family.c
@@ -251,7 +251,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/stm32f4/family.mk b/hw/bsp/stm32f4/family.mk
index c3c41dc3f..f3e74ecea 100644
--- a/hw/bsp/stm32f4/family.mk
+++ b/hw/bsp/stm32f4/family.mk
@@ -71,6 +71,7 @@ SRC_C += \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c
 
 INC += \
+	$(TOP)/hw/bsp/stm32$(ST_FAMILY) \
 	$(TOP)/$(BOARD_PATH) \
 	$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
 	$(TOP)/$(ST_CMSIS)/Include \
diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c
index d8f0da201..ce9049abe 100644
--- a/hw/bsp/stm32f7/family.c
+++ b/hw/bsp/stm32f7/family.c
@@ -312,7 +312,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/stm32g0/family.c b/hw/bsp/stm32g0/family.c
index 4b175b0ec..b25897264 100644
--- a/hw/bsp/stm32g0/family.c
+++ b/hw/bsp/stm32g0/family.c
@@ -181,7 +181,7 @@ void SysTick_Handler(void) {
   HAL_IncTick();
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/stm32g4/family.c b/hw/bsp/stm32g4/family.c
index d8afa0f95..2e13a1d4b 100644
--- a/hw/bsp/stm32g4/family.c
+++ b/hw/bsp/stm32g4/family.c
@@ -211,7 +211,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/stm32h5/family.c b/hw/bsp/stm32h5/family.c
index fdb12e44f..1e8acd502 100644
--- a/hw/bsp/stm32h5/family.c
+++ b/hw/bsp/stm32h5/family.c
@@ -207,7 +207,7 @@ void SysTick_Handler(void) {
   HAL_IncTick();
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h
index 44ca58dc5..d2f61a5ce 100644
--- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h
+++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h
@@ -120,13 +120,13 @@ static inline void SystemClock_Config(void) {
   // From H743 eval manual ETM can only work at 50 MHz clock by default because ETM signals
   // are shared with other peripherals. Trace CLK = PLL1R.
   RCC_OscInitStruct.PLL.PLLM = 5;
-  RCC_OscInitStruct.PLL.PLLN = 160;
-  RCC_OscInitStruct.PLL.PLLP = 2;
-  RCC_OscInitStruct.PLL.PLLQ = 4;
-  RCC_OscInitStruct.PLL.PLLR = 6; // Trace clock is 400/6 = 66.67 MHz (larger than 50 MHz but work well)
+  RCC_OscInitStruct.PLL.PLLN      = 160; // May reduce to 100/200 Mhz when tracing to avoid overflowing trace buffer
+  RCC_OscInitStruct.PLL.PLLP      = 2;
+  RCC_OscInitStruct.PLL.PLLQ      = 4;
+  RCC_OscInitStruct.PLL.PLLR      = RCC_OscInitStruct.PLL.PLLN/10;  // Trace clock is limit to 50 Mhz to meet board requirement
+  RCC_OscInitStruct.PLL.PLLRGE    = RCC_PLL1VCIRANGE_2;
   RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM;
   RCC_OscInitStruct.PLL.PLLFRACN = 0;
-  RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2;
   HAL_RCC_OscConfig(&RCC_OscInitStruct);
 
 
diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/cubemx/stm32h743eval.ioc b/hw/bsp/stm32h7/boards/stm32h743eval/cubemx/stm32h743eval.ioc
index 0e5a4cc00..a2e11012f 100644
--- a/hw/bsp/stm32h7/boards/stm32h743eval/cubemx/stm32h743eval.ioc
+++ b/hw/bsp/stm32h7/boards/stm32h743eval/cubemx/stm32h743eval.ioc
@@ -193,8 +193,8 @@ Mcu.PinsNb=169
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32H743XIHx
-MxCube.Version=6.10.0
-MxDb.Version=DB.6.0.100
+MxCube.Version=6.12.1
+MxDb.Version=DB.6.0.121
 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false
 NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false
 NVIC.ForceEnableDMAVector=true
@@ -880,12 +880,12 @@ ProjectManager.CustomerFirmwarePackage=
 ProjectManager.DefaultFWLocation=true
 ProjectManager.DeletePrevious=true
 ProjectManager.DeviceId=STM32H743XIHx
-ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.11.0
+ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.11.2
 ProjectManager.FreePins=false
 ProjectManager.HalAssertFull=false
 ProjectManager.HeapSize=0x200
 ProjectManager.KeepUserCode=true
-ProjectManager.LastFirmware=false
+ProjectManager.LastFirmware=true
 ProjectManager.LibraryCopy=2
 ProjectManager.MainLocation=Src
 ProjectManager.NoMain=false
@@ -933,8 +933,8 @@ RCC.DIVQ1Freq_Value=200000000
 RCC.DIVQ2Freq_Value=50390625
 RCC.DIVQ3=7
 RCC.DIVQ3Freq_Value=48000000
-RCC.DIVR1=6
-RCC.DIVR1Freq_Value=133333333.33333333
+RCC.DIVR1=8
+RCC.DIVR1Freq_Value=100000000
 RCC.DIVR2Freq_Value=50390625
 RCC.DIVR3Freq_Value=168000000
 RCC.EnbaleCSS=true
@@ -979,7 +979,7 @@ RCC.SYSCLKFreq_VALUE=400000000
 RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
 RCC.Tim1OutputFreq_Value=200000000
 RCC.Tim2OutputFreq_Value=200000000
-RCC.TraceFreq_Value=133333333.33333333
+RCC.TraceFreq_Value=100000000
 RCC.USART16Freq_Value=100000000
 RCC.USART234578Freq_Value=100000000
 RCC.USBCLockSelection=RCC_USBCLKSOURCE_PLL3
diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/ozone/stm32h743.jdebug b/hw/bsp/stm32h7/boards/stm32h743eval/ozone/stm32h743.jdebug
index 0ab078319..32a8155c1 100644
--- a/hw/bsp/stm32h7/boards/stm32h743eval/ozone/stm32h743.jdebug
+++ b/hw/bsp/stm32h7/boards/stm32h743eval/ozone/stm32h743.jdebug
@@ -9,6 +9,10 @@
 **********************************************************************
 */
 void OnProjectLoad (void) {
+   Project.SetTraceSource ("Trace Pins");
+  Project.SetTraceTiming (100, 100, 100, 100);
+  Project.SetSWO (0);
+  Edit.SysVar (VAR_TRACE_CORE_CLOCK, 200000000);
   Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M7F.svd");
   Project.AddSvdFile ("$(InstallDir)/Config/Peripherals/ARMv7M.svd");
   Project.AddSvdFile ("./STM32H743.svd");
@@ -18,12 +22,8 @@ void OnProjectLoad (void) {
   Project.SetTargetIF ("SWD");
   Project.SetTIFSpeed ("50 MHz");
 
-  Project.SetTraceSource ("Trace Pins");
-  Project.SetTracePortWidth (4);
-  // timing delay for trace pins in pico seconds, default is 2 nano seconds
-  Project.SetTraceTiming (100, 100, 100, 100);
-
   File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-stm32h743eval/cdc_msc.elf");
+  // File.Open ("../../../../../../examples/cmake-build-stm32h743eval_host1/host/cdc_msc_hid/cdc_msc_hid.elf");
 }
 
 /*********************************************************************
diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c
index a320a7e72..c94c2e755 100644
--- a/hw/bsp/stm32h7/family.c
+++ b/hw/bsp/stm32h7/family.c
@@ -139,6 +139,10 @@ void board_init(void) {
   #endif
 
   NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
+
+#elif CFG_TUSB_OS == OPT_OS_THREADX
+  // Disable SysTick before kernel entry; _tx_initialize_low_level() will re-configure it
+  SysTick->CTRL &= ~1UL;
 #endif
 
   GPIO_InitTypeDef GPIO_InitStruct;
@@ -295,10 +299,15 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
+#elif CFG_TUSB_OS == OPT_OS_THREADX
+// Keep HAL_GetTick() working for HAL functions called from board_init()
+void osal_threadx_tick_cb(void) {
+  HAL_IncTick();
+}
 #endif
 
 void HardFault_Handler(void) {
diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h
index 16c2fd335..4b8564709 100644
--- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h
+++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h
@@ -62,7 +62,7 @@ static board_pindef_t board_pindef[] = {
   { // Button
     .port = GPIOC,
     .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 },
-    .active_state = 1
+    .active_state = 0
   },
   { // UART TX
     .port = GPIOD,
diff --git a/hw/bsp/stm32h7rs/family.c b/hw/bsp/stm32h7rs/family.c
index 2cc39b7ac..3bf75ba97 100644
--- a/hw/bsp/stm32h7rs/family.c
+++ b/hw/bsp/stm32h7rs/family.c
@@ -468,7 +468,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/stm32l0/family.c b/hw/bsp/stm32l0/family.c
index 6aeab1259..7fd076dbd 100644
--- a/hw/bsp/stm32l0/family.c
+++ b/hw/bsp/stm32l0/family.c
@@ -123,7 +123,8 @@ void board_init(void) {
 //--------------------------------------------------------------------+
 
 void board_led_write(bool state) {
-  HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON));
+  GPIO_PinState pin_state = (GPIO_PinState)(state ? LED_STATE_ON : (1 - LED_STATE_ON));
+  HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state);
 }
 
 uint32_t board_button_read(void) {
@@ -168,7 +169,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/stm32l4/family.c b/hw/bsp/stm32l4/family.c
index 65f6b9ab3..c87b643b8 100644
--- a/hw/bsp/stm32l4/family.c
+++ b/hw/bsp/stm32l4/family.c
@@ -231,7 +231,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/stm32n6/family.c b/hw/bsp/stm32n6/family.c
index c839e6b3e..4354616c3 100644
--- a/hw/bsp/stm32n6/family.c
+++ b/hw/bsp/stm32n6/family.c
@@ -366,7 +366,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/stm32u0/family.c b/hw/bsp/stm32u0/family.c
index 50b513d8f..0f91d1f30 100644
--- a/hw/bsp/stm32u0/family.c
+++ b/hw/bsp/stm32u0/family.c
@@ -174,7 +174,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c
index dfcf5c537..55ca25d58 100644
--- a/hw/bsp/stm32u5/family.c
+++ b/hw/bsp/stm32u5/family.c
@@ -270,7 +270,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/stm32wb/family.c b/hw/bsp/stm32wb/family.c
index 153d10a09..de503c072 100644
--- a/hw/bsp/stm32wb/family.c
+++ b/hw/bsp/stm32wb/family.c
@@ -174,7 +174,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/stm32wba/family.c b/hw/bsp/stm32wba/family.c
index d05415755..878355b48 100644
--- a/hw/bsp/stm32wba/family.c
+++ b/hw/bsp/stm32wba/family.c
@@ -175,7 +175,10 @@ void board_init(void) {
   #endif // USB_OTG_HS
 }
 
-void board_led_write(bool state) { HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); }
+void board_led_write(bool state) {
+  GPIO_PinState pin_state = (GPIO_PinState)(state ? LED_STATE_ON : (1 - LED_STATE_ON));
+  HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state);
+}
 
 uint32_t board_button_read(void) { return HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN) == BUTTON_STATE_ACTIVE; }
 
@@ -198,7 +201,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) { return system_ticks; }
+uint32_t tusb_time_millis_api(void) { return system_ticks; }
 #endif
 
 void HardFault_Handler(void) { asm( "bkpt 1" ); }
diff --git a/hw/bsp/tm4c/family.c b/hw/bsp/tm4c/family.c
index ae7f22f00..503d0a8c9 100644
--- a/hw/bsp/tm4c/family.c
+++ b/hw/bsp/tm4c/family.c
@@ -211,7 +211,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }
 
diff --git a/hw/bsp/xmc4000/family.c b/hw/bsp/xmc4000/family.c
index 6fef53025..d0acd04cb 100644
--- a/hw/bsp/xmc4000/family.c
+++ b/hw/bsp/xmc4000/family.c
@@ -147,7 +147,7 @@ void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void) {
+uint32_t tusb_time_millis_api(void) {
   return system_ticks;
 }