diff options
| author | HiFiPhile <[email protected]> | 2026-02-27 11:47:58 +0100 |
|---|---|---|
| committer | HiFiPhile <[email protected]> | 2026-02-27 11:47:58 +0100 |
| commit | ecc0e12dd5ab58cffafb03a8d1800dc68bed1c6f (patch) | |
| tree | 6ced64f1cca39af4aaf77a3861785f5b21f71b1b /hw | |
| parent | a3fd3071c17bdc7392db1361f3a97019351af337 (diff) | |
| parent | bd1e79bc6cefbbbe981691c3a55e24cf25537301 (diff) | |
Merge remote-tracking branch 'tinyusb/master' into dwc2_deinit
Signed-off-by: HiFiPhile <[email protected]>
Diffstat (limited to 'hw')
83 files changed, 3132 insertions, 312 deletions
diff --git a/hw/bsp/BoardPresets.json b/hw/bsp/BoardPresets.json index 440ef8733..fabbeed93 100644 --- a/hw/bsp/BoardPresets.json +++ b/hw/bsp/BoardPresets.json @@ -175,6 +175,10 @@ "inherits": "default" }, { + "name": "ek_tm4c1294xl", + "inherits": "default" + }, + { "name": "f1c100s", "inherits": "default" }, @@ -719,6 +723,10 @@ "inherits": "default" }, { + "name": "stm32h747disco", + "inherits": "default" + }, + { "name": "stm32h750_weact", "inherits": "default" }, @@ -1109,6 +1117,11 @@ "configurePreset": "ek_tm4c123gxl" }, { + "name": "ek_tm4c1294xl", + "description": "Build preset for the ek_tm4c1294xl board", + "configurePreset": "ek_tm4c1294xl" + }, + { "name": "espressif_addax_1", "description": "Build preset for the espressif_addax_1 board", "configurePreset": "espressif_addax_1" @@ -1834,6 +1847,11 @@ "configurePreset": "stm32h745disco" }, { + "name": "stm32h747disco", + "description": "Build preset for the stm32h747disco board", + "configurePreset": "stm32h747disco" + }, + { "name": "stm32h750_weact", "description": "Build preset for the stm32h750_weact board", "configurePreset": "stm32h750_weact" @@ -2543,6 +2561,19 @@ ] }, { + "name": "ek_tm4c1294xl", + "steps": [ + { + "type": "configure", + "name": "ek_tm4c1294xl" + }, + { + "type": "build", + "name": "ek_tm4c1294xl" + } + ] + }, + { "name": "espressif_addax_1", "steps": [ { @@ -4428,6 +4459,19 @@ ] }, { + "name": "stm32h747disco", + "steps": [ + { + "type": "configure", + "name": "stm32h747disco" + }, + { + "type": "build", + "name": "stm32h747disco" + } + ] + }, + { "name": "stm32h750_weact", "steps": [ { diff --git a/hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..c5b89452e --- /dev/null +++ b/hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,176 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ +// Include MCU header + #include "at32f45x.h" +#endif + +/* Cortex-M4 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE ( 1024 ) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ system_core_clock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +#ifdef __RX__ +/* Renesas RX series */ +#define vSoftwareInterruptISR INT_Excep_ICU_SWINT +#define vTickISR INT_Excep_CMT0_CMI0 +#define configPERIPHERAL_CLOCK_HZ (configCPU_CLOCK_HZ/2) +#define configKERNEL_INTERRUPT_PRIORITY 1 +#define configMAX_SYSCALL_INTERRUPT_PRIORITY 4 + +#else + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ +#if defined(__NVIC_PRIO_BITS) + // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h + #define configPRIO_BITS __NVIC_PRIO_BITS + +#elif defined(__ECLIC_INTCTLBITS) + // RISC-V Bumblebee core from nuclei + #define configPRIO_BITS __ECLIC_INTCTLBITS + +#elif defined(__IASMARM__) + // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS. + // Therefore we will hard coded it to minimum value of 2 to get pass ci build. + // IAR user must update this to correct value of the target MCU + #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU" + #define configPRIO_BITS 2 + +#else + #error "FreeRTOS configPRIO_BITS to be defined" +#endif + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<<configPRIO_BITS) - 1) + +/* The highest interrupt priority that can be used by any interrupt service +routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL +INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER +PRIORITY THAN THIS! (higher priorities are lower numeric values. */ +#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 2 + +/* Interrupt priorities used by the kernel port layer itself. These are generic +to all Cortex-M ports, and do not rely on any particular library functions. */ +#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! +See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ +#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +#endif + +#endif /* __FREERTOS_CONFIG__H */ diff --git a/hw/bsp/at32f45x/at32f45x_clock.c b/hw/bsp/at32f45x/at32f45x_clock.c new file mode 100644 index 000000000..a66a8b1aa --- /dev/null +++ b/hw/bsp/at32f45x/at32f45x_clock.c @@ -0,0 +1,114 @@ +/** + ************************************************************************** + * @file at32f45x_clock.c + * @brief system clock config program + ************************************************************************** + * + * Copyright (c) 2025, Artery Technology, All rights reserved. + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* includes ------------------------------------------------------------------*/ +#include "at32f45x_clock.h" + +/** + * @brief system clock config program + * @note the system clock is configured as follow: + * - system clock = (hext * pll_ns)/(pll_ms * pll_fp) + * - system clock source = pll (hext) + * - hext = 8000000 + * - sclk = 192000000 + * - ahbdiv = 1 + * - ahbclk = 192000000 + * - apb2div = 1 + * - apb2clk = 192000000 + * - apb1div = 1 + * - apb1clk = 192000000 + * - pll_ns = 96 + * - pll_ms = 1 + * - pll_fp = 4 + * @param none + * @retval none + */ +void system_clock_config(void) +{ + /* reset crm */ + crm_reset(); + + /* set the flash clock divider */ + flash_psr_set(FLASH_WAIT_CYCLE_5); + + /* enable pwc periph clock */ + crm_periph_clock_enable(CRM_PWC_PERIPH_CLOCK, TRUE); + + /* config ldo voltage */ + pwc_ldo_output_voltage_set(PWC_LDO_OUTPUT_1V3); + + crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE); + + /* wait till hext is ready */ + while(crm_hext_stable_wait() == ERROR) + { + } + + /* config pll clock resource */ + crm_pll_config(CRM_PLL_SOURCE_HEXT, 96, 1, CRM_PLL_FP_4); + + /* config pllu divider */ + crm_pllu_div_set(CRM_PLL_FU_16); + + /* pllu enable */ + crm_pllu_output_set(TRUE); + + /* enable pll */ + crm_clock_source_enable(CRM_CLOCK_SOURCE_PLL, TRUE); + + /* wait till pll is ready */ + while(crm_flag_get(CRM_PLL_STABLE_FLAG) != SET) + { + } + + /* config ahbclk */ + crm_ahb_div_set(CRM_AHB_DIV_1); + + /* config apb3clk, the maximum frequency of APB3 clock is 90 MHz */ + crm_apb3_div_set(CRM_APB3_DIV_4); + + /* config apb2clk, the maximum frequency of APB2 clock is 192 MHz */ + crm_apb2_div_set(CRM_APB2_DIV_1); + + /* config apb1clk, the maximum frequency of APB1 clock is 192 MHz */ + crm_apb1_div_set(CRM_APB1_DIV_1); + + /* enable auto step mode */ + crm_auto_step_mode_enable(TRUE); + + /* select pll as system clock source */ + crm_sysclk_switch(CRM_SCLK_PLL); + + /* wait till pll is used as system clock source */ + while(crm_sysclk_switch_status_get() != CRM_SCLK_PLL) + { + } + + /* disable auto step mode */ + crm_auto_step_mode_enable(FALSE); + + /* update system_core_clock global variable */ + system_core_clock_update(); +} diff --git a/hw/bsp/at32f45x/at32f45x_clock.h b/hw/bsp/at32f45x/at32f45x_clock.h new file mode 100644 index 000000000..a372a605b --- /dev/null +++ b/hw/bsp/at32f45x/at32f45x_clock.h @@ -0,0 +1,44 @@ +/** + ************************************************************************** + * @file at32f45x_clock.h + * @brief header file of clock program + ************************************************************************** + * + * Copyright (c) 2025, Artery Technology, All rights reserved. + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F45x_CLOCK_H +#define __AT32F45x_CLOCK_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* includes ------------------------------------------------------------------*/ +#include "at32f45x.h" + +/* exported functions ------------------------------------------------------- */ +void system_clock_config(void); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/at32f45x/at32f45x_conf.h b/hw/bsp/at32f45x/at32f45x_conf.h new file mode 100644 index 000000000..90182437f --- /dev/null +++ b/hw/bsp/at32f45x/at32f45x_conf.h @@ -0,0 +1,174 @@ +/** + ************************************************************************** + * @file at32f45x_conf.h + * @brief at32f45x config header file + ************************************************************************** + * + * Copyright (c) 2025, Artery Technology, All rights reserved. + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F45x_CONF_H +#define __AT32F45x_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief in the following line adjust the value of high speed external crystal (hext) + * used in your application + * + * tip: to avoid modifying this file each time you need to use different hext, you + * can define the hext value in your toolchain compiler preprocessor. + * + */ +#if !defined HEXT_VALUE +#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */ +#endif + +/** + * @brief in the following line adjust the high speed external crystal (hext) startup + * timeout value + */ +#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */ +#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */ +#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */ + +/* module define -------------------------------------------------------------*/ +#define ACC_MODULE_ENABLED +#define ADC_MODULE_ENABLED +#define AES_MODULE_ENABLED +#define CAN_MODULE_ENABLED +#define CRC_MODULE_ENABLED +#define CRM_MODULE_ENABLED +#define DAC_MODULE_ENABLED +#define DEBUG_MODULE_ENABLED +#define DMA_MODULE_ENABLED +#define EMAC_MODULE_ENABLED +#define ERTC_MODULE_ENABLED +#define EXINT_MODULE_ENABLED +#define FLASH_MODULE_ENABLED +#define GPIO_MODULE_ENABLED +#define I2C_MODULE_ENABLED +#define MISC_MODULE_ENABLED +#define PWC_MODULE_ENABLED +#define QSPI_MODULE_ENABLED +#define SCFG_MODULE_ENABLED +#define SDIO_MODULE_ENABLED +#define SPI_MODULE_ENABLED +#define TMR_MODULE_ENABLED +#define TRNG_MODULE_ENABLED +#define USART_MODULE_ENABLED +#define USB_MODULE_ENABLED +#define WWDT_MODULE_ENABLED +#define WDT_MODULE_ENABLED +#define XMC_MODULE_ENABLED + +/* includes ------------------------------------------------------------------*/ +#ifdef ACC_MODULE_ENABLED +#include "at32f45x_acc.h" +#endif +#ifdef ADC_MODULE_ENABLED +#include "at32f45x_adc.h" +#endif +#ifdef AES_MODULE_ENABLED +#include "at32f45x_aes.h" +#endif +#ifdef CAN_MODULE_ENABLED +#include "at32f45x_can.h" +#endif +#ifdef CRC_MODULE_ENABLED +#include "at32f45x_crc.h" +#endif +#ifdef CRM_MODULE_ENABLED +#include "at32f45x_crm.h" +#endif +#ifdef DAC_MODULE_ENABLED +#include "at32f45x_dac.h" +#endif +#ifdef DEBUG_MODULE_ENABLED +#include "at32f45x_debug.h" +#endif +#ifdef DMA_MODULE_ENABLED +#include "at32f45x_dma.h" +#endif +#ifdef EMAC_MODULE_ENABLED +#include "at32f45x_emac.h" +#endif +#ifdef ERTC_MODULE_ENABLED +#include "at32f45x_ertc.h" +#endif +#ifdef EXINT_MODULE_ENABLED +#include "at32f45x_exint.h" +#endif +#ifdef FLASH_MODULE_ENABLED +#include "at32f45x_flash.h" +#endif +#ifdef GPIO_MODULE_ENABLED +#include "at32f45x_gpio.h" +#endif +#ifdef I2C_MODULE_ENABLED +#include "at32f45x_i2c.h" +#endif +#ifdef MISC_MODULE_ENABLED +#include "at32f45x_misc.h" +#endif +#ifdef PWC_MODULE_ENABLED +#include "at32f45x_pwc.h" +#endif +#ifdef QSPI_MODULE_ENABLED +#include "at32f45x_qspi.h" +#endif +#ifdef SCFG_MODULE_ENABLED +#include "at32f45x_scfg.h" +#endif +#ifdef SDIO_MODULE_ENABLED +#include "at32f45x_sdio.h" +#endif +#ifdef SPI_MODULE_ENABLED +#include "at32f45x_spi.h" +#endif +#ifdef TMR_MODULE_ENABLED +#include "at32f45x_tmr.h" +#endif +#ifdef TRNG_MODULE_ENABLED +#include "at32f45x_trng.h" +#endif +#ifdef USART_MODULE_ENABLED +#include "at32f45x_usart.h" +#endif +#ifdef USB_MODULE_ENABLED +#include "at32f45x_usb.h" +#endif +#ifdef WDT_MODULE_ENABLED +#include "at32f45x_wdt.h" +#endif +#ifdef WWDT_MODULE_ENABLED +#include "at32f45x_wwdt.h" +#endif +#ifdef XMC_MODULE_ENABLED +#include "at32f45x_xmc.h" +#endif + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/at32f45x/at32f45x_int.c b/hw/bsp/at32f45x/at32f45x_int.c new file mode 100644 index 000000000..b3ba6ad9c --- /dev/null +++ b/hw/bsp/at32f45x/at32f45x_int.c @@ -0,0 +1,100 @@ +/** + ************************************************************************** + * @file at32f45x_int.c + * @brief main interrupt service routines. + ************************************************************************** + * + * Copyright (c) 2025, Artery Technology, All rights reserved. + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* includes ------------------------------------------------------------------*/ +#include "at32f45x_int.h" + +/** @addtogroup AT32F45X_BSP + * @{ + */ + +/** @addtogroup AT32F45X_USB_Device_Keyboard + * @{ + */ + +/** + * @brief this function handles nmi exception. + * @param none + * @retval none + */ +void NMI_Handler(void) +{ +} + +/** + * @brief this function handles memory manage exception. + * @param none + * @retval none + */ +void MemManage_Handler(void) +{ + /* go to infinite loop when memory manage exception occurs */ + while(1) + { + } +} + +/** + * @brief this function handles bus fault exception. + * @param none + * @retval none + */ +void BusFault_Handler(void) +{ + /* go to infinite loop when bus fault exception occurs */ + while(1) + { + } +} + +/** + * @brief this function handles usage fault exception. + * @param none + * @retval none + */ +void UsageFault_Handler(void) +{ + /* go to infinite loop when usage fault exception occurs */ + while(1) + { + } +} + +/** + * @brief this function handles debug monitor exception. + * @param none + * @retval none + */ +void DebugMon_Handler(void) +{ +} + +/** + * @} + */ + +/** + * @} + */ diff --git a/hw/bsp/at32f45x/at32f45x_int.h b/hw/bsp/at32f45x/at32f45x_int.h new file mode 100644 index 000000000..3a2667e9d --- /dev/null +++ b/hw/bsp/at32f45x/at32f45x_int.h @@ -0,0 +1,59 @@ +/** + ************************************************************************** + * @file at32f45x_int.h + * @brief header file of main interrupt service routines. + ************************************************************************** + * + * Copyright (c) 2025, Artery Technology, All rights reserved. + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F45x_INT_H +#define __AT32F45x_INT_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* includes ------------------------------------------------------------------*/ +#include "at32f45x.h" + +/* exported types ------------------------------------------------------------*/ +/* exported constants --------------------------------------------------------*/ +/* exported macro ------------------------------------------------------------*/ +/* exported functions ------------------------------------------------------- */ + +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); + +void OTGFS1_IRQHandler(void); +void OTGFS1_WKUP_IRQHandler(void); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/at32f45x/boards/at_start_f455/board.cmake b/hw/bsp/at32f45x/boards/at_start_f455/board.cmake new file mode 100644 index 000000000..f06f9599e --- /dev/null +++ b/hw/bsp/at32f45x/boards/at_start_f455/board.cmake @@ -0,0 +1,8 @@ +set(MCU_VARIANT AT32F455ZET7) +set(MCU_LINKER_NAME AT32F455xE) + +set(JLINK_DEVICE ${MCU_VARIANT}) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC ${MCU_VARIANT}) +endfunction() diff --git a/hw/bsp/at32f45x/boards/at_start_f455/board.h b/hw/bsp/at32f45x/boards/at_start_f455/board.h new file mode 100644 index 000000000..64e27c016 --- /dev/null +++ b/hw/bsp/at32f45x/boards/at_start_f455/board.h @@ -0,0 +1,96 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: AT-START-F455 + url: https://www.arterychip.com/en/product/AT32F455.jsp +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define USB_VBUS_IGNORE + +// LED +#define LED_PORT GPIOD +#define LED_PIN GPIO_PINS_13 +#define LED_STATE_ON 0 // Active Low +#define LED_GPIO_CLK_EN() crm_periph_clock_enable(CRM_GPIOD_PERIPH_CLOCK, TRUE) + +// Button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PINS_0 +#define BUTTON_STATE_ACTIVE 1 +#define BUTTON_GPIO_CLK_EN() crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE) + +// UART +#define PRINT_UART USART1 +#define PRINT_UART_CRM_CLK CRM_USART1_PERIPH_CLOCK +#define PRINT_UART_TX_PIN GPIO_PINS_9 +#define PRINT_UART_TX_GPIO GPIOA +#define PRINT_UART_TX_GPIO_CRM_CLK CRM_GPIOA_PERIPH_CLOCK +#define PRINT_UART_TX_PIN_SOURCE GPIO_PINS_SOURCE9 +#define PRINT_UART_TX_PIN_MUX_NUM GPIO_MUX_7 + +//USB +#define USB_ID 0 +#define OTG_CLOCK CRM_OTGFS1_PERIPH_CLOCK +#define OTG_IRQ OTGFS1_IRQn +#define OTG_IRQ_HANDLER OTGFS1_IRQHandler +#define OTG_WKUP_IRQ OTGFS1_WKUP_IRQn +#define OTG_WKUP_HANDLER OTGFS1_WKUP_IRQHandler +#define OTG_WKUP_EXINT_LINE EXINT_LINE_18 +#define OTG_PIN_GPIO GPIOA +#define OTG_PIN_GPIO_CLOCK CRM_GPIOA_PERIPH_CLOCK +#define OTG_PIN_DP GPIO_PINS_12 +#define OTG_PIN_DP_SOURCE GPIO_PINS_SOURCE12 +#define OTG_PIN_DM GPIO_PINS_11 +#define OTG_PIN_DM_SOURCE GPIO_PINS_SOURCE11 +#define OTG_PIN_VBUS GPIO_PINS_9 +#define OTG_PIN_VBUS_SOURCE GPIO_PINS_SOURCE9 +#define OTG_PIN_ID GPIO_PINS_10 +#define OTG_PIN_ID_SOURCE GPIO_PINS_SOURCE10 +#define OTG_PIN_SOF_GPIO GPIOA +#define OTG_PIN_SOF_GPIO_CLOCK CRM_GPIOA_PERIPH_CLOCK +#define OTG_PIN_SOF GPIO_PINS_8 +#define OTG_PIN_SOF_SOURCE GPIO_PINS_SOURCE8 +#define OTG_PIN_MUX GPIO_MUX_10 + +//Vbus +static inline void board_vbus_sense_init(void) +{ + *(int*)(0x50000038) |= (1<<21); +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/at32f45x/boards/at_start_f455/board.mk b/hw/bsp/at32f45x/boards/at_start_f455/board.mk new file mode 100644 index 000000000..7c24ad288 --- /dev/null +++ b/hw/bsp/at32f45x/boards/at_start_f455/board.mk @@ -0,0 +1,7 @@ +MCU_VARIANT = AT32F455ZET7 +MCU_LINKER_NAME = AT32F455xE + +JLINK_DEVICE = ${MCU_VARIANT} + +CFLAGS += \ + -D${MCU_VARIANT} diff --git a/hw/bsp/at32f45x/boards/at_start_f456/board.cmake b/hw/bsp/at32f45x/boards/at_start_f456/board.cmake new file mode 100644 index 000000000..a5048d3b1 --- /dev/null +++ b/hw/bsp/at32f45x/boards/at_start_f456/board.cmake @@ -0,0 +1,8 @@ +set(MCU_VARIANT AT32F456ZET7) +set(MCU_LINKER_NAME AT32F456xE) + +set(JLINK_DEVICE ${MCU_VARIANT}) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC ${MCU_VARIANT}) +endfunction() diff --git a/hw/bsp/at32f45x/boards/at_start_f456/board.h b/hw/bsp/at32f45x/boards/at_start_f456/board.h new file mode 100644 index 000000000..d3d734a9b --- /dev/null +++ b/hw/bsp/at32f45x/boards/at_start_f456/board.h @@ -0,0 +1,96 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: AT-START-F456 + url: https://www.arterychip.com/en/product/AT32F456.jsp +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define USB_VBUS_IGNORE + +// LED +#define LED_PORT GPIOD +#define LED_PIN GPIO_PINS_13 +#define LED_STATE_ON 0 // Active Low +#define LED_GPIO_CLK_EN() crm_periph_clock_enable(CRM_GPIOD_PERIPH_CLOCK, TRUE) + +// Button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PINS_0 +#define BUTTON_STATE_ACTIVE 1 +#define BUTTON_GPIO_CLK_EN() crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE) + +// UART +#define PRINT_UART USART1 +#define PRINT_UART_CRM_CLK CRM_USART1_PERIPH_CLOCK +#define PRINT_UART_TX_PIN GPIO_PINS_9 +#define PRINT_UART_TX_GPIO GPIOA +#define PRINT_UART_TX_GPIO_CRM_CLK CRM_GPIOA_PERIPH_CLOCK +#define PRINT_UART_TX_PIN_SOURCE GPIO_PINS_SOURCE9 +#define PRINT_UART_TX_PIN_MUX_NUM GPIO_MUX_7 + +//USB +#define USB_ID 0 +#define OTG_CLOCK CRM_OTGFS1_PERIPH_CLOCK +#define OTG_IRQ OTGFS1_IRQn +#define OTG_IRQ_HANDLER OTGFS1_IRQHandler +#define OTG_WKUP_IRQ OTGFS1_WKUP_IRQn +#define OTG_WKUP_HANDLER OTGFS1_WKUP_IRQHandler +#define OTG_WKUP_EXINT_LINE EXINT_LINE_18 +#define OTG_PIN_GPIO GPIOA +#define OTG_PIN_GPIO_CLOCK CRM_GPIOA_PERIPH_CLOCK +#define OTG_PIN_DP GPIO_PINS_12 +#define OTG_PIN_DP_SOURCE GPIO_PINS_SOURCE12 +#define OTG_PIN_DM GPIO_PINS_11 +#define OTG_PIN_DM_SOURCE GPIO_PINS_SOURCE11 +#define OTG_PIN_VBUS GPIO_PINS_9 +#define OTG_PIN_VBUS_SOURCE GPIO_PINS_SOURCE9 +#define OTG_PIN_ID GPIO_PINS_10 +#define OTG_PIN_ID_SOURCE GPIO_PINS_SOURCE10 +#define OTG_PIN_SOF_GPIO GPIOA +#define OTG_PIN_SOF_GPIO_CLOCK CRM_GPIOA_PERIPH_CLOCK +#define OTG_PIN_SOF GPIO_PINS_8 +#define OTG_PIN_SOF_SOURCE GPIO_PINS_SOURCE8 +#define OTG_PIN_MUX GPIO_MUX_10 + +//Vbus +static inline void board_vbus_sense_init(void) +{ + *(int*)(0x50000038) |= (1<<21); +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/at32f45x/boards/at_start_f456/board.mk b/hw/bsp/at32f45x/boards/at_start_f456/board.mk new file mode 100644 index 000000000..596d99d61 --- /dev/null +++ b/hw/bsp/at32f45x/boards/at_start_f456/board.mk @@ -0,0 +1,7 @@ +MCU_VARIANT = AT32F456ZET7 +MCU_LINKER_NAME = AT32F456xE + +JLINK_DEVICE = ${MCU_VARIANT} + +CFLAGS += \ + -D${MCU_VARIANT} diff --git a/hw/bsp/at32f45x/boards/at_start_f457/board.cmake b/hw/bsp/at32f45x/boards/at_start_f457/board.cmake new file mode 100644 index 000000000..c8cd886be --- /dev/null +++ b/hw/bsp/at32f45x/boards/at_start_f457/board.cmake @@ -0,0 +1,8 @@ +set(MCU_VARIANT AT32F457ZET7) +set(MCU_LINKER_NAME AT32F457xE) + +set(JLINK_DEVICE ${MCU_VARIANT}) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC ${MCU_VARIANT}) +endfunction() diff --git a/hw/bsp/at32f45x/boards/at_start_f457/board.h b/hw/bsp/at32f45x/boards/at_start_f457/board.h new file mode 100644 index 000000000..2216b1ed3 --- /dev/null +++ b/hw/bsp/at32f45x/boards/at_start_f457/board.h @@ -0,0 +1,96 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: AT-START-F457 + url: https://www.arterychip.com/en/product/AT32F457.jsp +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define USB_VBUS_IGNORE + +// LED +#define LED_PORT GPIOD +#define LED_PIN GPIO_PINS_13 +#define LED_STATE_ON 0 // Active Low +#define LED_GPIO_CLK_EN() crm_periph_clock_enable(CRM_GPIOD_PERIPH_CLOCK, TRUE) + +// Button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PINS_0 +#define BUTTON_STATE_ACTIVE 1 +#define BUTTON_GPIO_CLK_EN() crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE) + +// UART +#define PRINT_UART USART1 +#define PRINT_UART_CRM_CLK CRM_USART1_PERIPH_CLOCK +#define PRINT_UART_TX_PIN GPIO_PINS_9 +#define PRINT_UART_TX_GPIO GPIOA +#define PRINT_UART_TX_GPIO_CRM_CLK CRM_GPIOA_PERIPH_CLOCK +#define PRINT_UART_TX_PIN_SOURCE GPIO_PINS_SOURCE9 +#define PRINT_UART_TX_PIN_MUX_NUM GPIO_MUX_7 + +//USB +#define USB_ID 0 +#define OTG_CLOCK CRM_OTGFS1_PERIPH_CLOCK +#define OTG_IRQ OTGFS1_IRQn +#define OTG_IRQ_HANDLER OTGFS1_IRQHandler +#define OTG_WKUP_IRQ OTGFS1_WKUP_IRQn +#define OTG_WKUP_HANDLER OTGFS1_WKUP_IRQHandler +#define OTG_WKUP_EXINT_LINE EXINT_LINE_18 +#define OTG_PIN_GPIO GPIOA +#define OTG_PIN_GPIO_CLOCK CRM_GPIOA_PERIPH_CLOCK +#define OTG_PIN_DP GPIO_PINS_12 +#define OTG_PIN_DP_SOURCE GPIO_PINS_SOURCE12 +#define OTG_PIN_DM GPIO_PINS_11 +#define OTG_PIN_DM_SOURCE GPIO_PINS_SOURCE11 +#define OTG_PIN_VBUS GPIO_PINS_9 +#define OTG_PIN_VBUS_SOURCE GPIO_PINS_SOURCE9 +#define OTG_PIN_ID GPIO_PINS_10 +#define OTG_PIN_ID_SOURCE GPIO_PINS_SOURCE10 +#define OTG_PIN_SOF_GPIO GPIOA +#define OTG_PIN_SOF_GPIO_CLOCK CRM_GPIOA_PERIPH_CLOCK +#define OTG_PIN_SOF GPIO_PINS_8 +#define OTG_PIN_SOF_SOURCE GPIO_PINS_SOURCE8 +#define OTG_PIN_MUX GPIO_MUX_10 + +//Vbus +static inline void board_vbus_sense_init(void) +{ + *(int*)(0x50000038) |= (1<<21); +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/at32f45x/boards/at_start_f457/board.mk b/hw/bsp/at32f45x/boards/at_start_f457/board.mk new file mode 100644 index 000000000..4cb4adad5 --- /dev/null +++ b/hw/bsp/at32f45x/boards/at_start_f457/board.mk @@ -0,0 +1,7 @@ +MCU_VARIANT = AT32F457ZET7 +MCU_LINKER_NAME = AT32F457xE + +JLINK_DEVICE = ${MCU_VARIANT} + +CFLAGS += \ + -D${MCU_VARIANT} diff --git a/hw/bsp/at32f45x/family.c b/hw/bsp/at32f45x/family.c new file mode 100644 index 000000000..0593e5115 --- /dev/null +++ b/hw/bsp/at32f45x/family.c @@ -0,0 +1,258 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + manufacturer: Artery +*/ + +#include "at32f45x_clock.h" +#include "at32f45x_int.h" +#include "board.h" +#include "bsp/board_api.h" + +void usb_clock48m_select(usb_clk48_s clk_s); +void led_and_button_init(void); +void uart_print_init(uint32_t baudrate); +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void OTGFS1_IRQHandler(void) { + tusb_int_handler(0, true); +} +void OTGFS1_WKUP_IRQHandler(void) { + tusb_int_handler(0, true); +} + +void board_init(void) { + /* config nvic priority group */ + nvic_priority_group_config(NVIC_PRIORITY_GROUP_4); + + /* config system clock */ + system_clock_config(); + + /* enable usb clock */ + crm_periph_clock_enable(OTG_CLOCK, TRUE); + + /* select usb 48m clcok source */ + usb_clock48m_select(USB_CLK_HEXT); + + /* vbus ignore */ + board_vbus_sense_init(); + + /* configure systick */ + systick_clock_source_config(SYSTICK_CLOCK_SOURCE_AHBCLK_NODIV); + SysTick_Config(system_core_clock / 1000); +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(OTG_IRQ, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + +/* otgfs use vbus pin */ +#ifndef USB_VBUS_IGNORE + gpio_init_type gpio_init_struct; + crm_periph_clock_enable(OTG_PIN_GPIO_CLOCK, TRUE); + gpio_default_para_init(&gpio_init_struct); + gpio_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER; + gpio_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL; + gpio_init_struct.gpio_mode = GPIO_MODE_MUX; + gpio_init_struct.gpio_pins = OTG_PIN_VBUS; + gpio_init_struct.gpio_pull = GPIO_PULL_DOWN; + gpio_pin_mux_config(OTG_PIN_GPIO, OTG_PIN_VBUS_SOURCE, OTG_PIN_MUX); + gpio_init(OTG_PIN_GPIO, &gpio_init_struct); +#endif + + /* config led and key */ + led_and_button_init(); + + /* config usart printf */ + uart_print_init(115200); + printf("usart printf config success!\r\n"); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ +/** + * @brief usb 48M clock select + * @param clk_s:USB_CLK_HICK, USB_CLK_HEXT + * @retval none + */ +void usb_clock48m_select(usb_clk48_s clk_s) +{ + if(clk_s == USB_CLK_HICK) + { + crm_usb_clock_source_select(CRM_USB_CLOCK_SOURCE_HICK); + + /* enable the acc calibration ready interrupt */ + crm_periph_clock_enable(CRM_ACC_PERIPH_CLOCK, TRUE); + + /* update the c1\c2\c3 value */ + acc_write_c1(7980); + acc_write_c2(8000); + acc_write_c3(8020); + + /* open acc calibration */ + acc_calibration_mode_enable(ACC_CAL_HICKTRIM, TRUE); + } + else + { + crm_usb_clock_source_select(CRM_USB_CLOCK_SOURCE_PLLU); + } +} + +void uart_print_init(uint32_t baudrate) { + gpio_init_type gpio_init_struct; + /* enable the uart and gpio clock */ + crm_periph_clock_enable(PRINT_UART_CRM_CLK, TRUE); + crm_periph_clock_enable(PRINT_UART_TX_GPIO_CRM_CLK, TRUE); + gpio_default_para_init(&gpio_init_struct); + /* configure the uart tx pin */ + gpio_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER; + gpio_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL; + gpio_init_struct.gpio_mode = GPIO_MODE_MUX; + gpio_init_struct.gpio_pins = PRINT_UART_TX_PIN; + gpio_init_struct.gpio_pull = GPIO_PULL_NONE; + gpio_init(PRINT_UART_TX_GPIO, &gpio_init_struct); + gpio_pin_mux_config(PRINT_UART_TX_GPIO, PRINT_UART_TX_PIN_SOURCE, PRINT_UART_TX_PIN_MUX_NUM); + /* configure uart param */ + usart_init(PRINT_UART, baudrate, USART_DATA_8BITS, USART_STOP_1_BIT); + usart_transmitter_enable(PRINT_UART, TRUE); + usart_enable(PRINT_UART, TRUE); +} + +void led_and_button_init(void) { + /* LED */ + gpio_init_type gpio_led_init_struct; + /* enable the led clock */ + LED_GPIO_CLK_EN(); + /* set default parameter */ + gpio_default_para_init(&gpio_led_init_struct); + /* configure the led gpio */ + gpio_led_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER; + gpio_led_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL; + gpio_led_init_struct.gpio_mode = GPIO_MODE_OUTPUT; + gpio_led_init_struct.gpio_pins = LED_PIN; + gpio_led_init_struct.gpio_pull = GPIO_PULL_NONE; + gpio_init(LED_PORT, &gpio_led_init_struct); + /* Button */ + gpio_init_type gpio_button_init_struct; + /* enable the button clock */ + BUTTON_GPIO_CLK_EN(); + /* set default parameter */ + gpio_default_para_init(&gpio_button_init_struct); + /* configure the button gpio */ + gpio_button_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER; + gpio_button_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL; + gpio_button_init_struct.gpio_mode = GPIO_MODE_INPUT; + gpio_button_init_struct.gpio_pins = BUTTON_PIN; + gpio_button_init_struct.gpio_pull = GPIO_PULL_DOWN; + gpio_init(BUTTON_PORT, &gpio_button_init_struct); +} + +void board_led_write(bool state) { + gpio_bits_write(LED_PORT, LED_PIN, state ^ (!LED_STATE_ON)); +} + +uint32_t board_button_read(void) { + return gpio_input_data_bit_read(BUTTON_PORT, BUTTON_PIN); +} + +size_t board_get_unique_id(uint8_t id[], size_t max_len) { + (void) max_len; + volatile uint32_t *at32_uuid = ((volatile uint32_t *) 0x1FFFF7E8); + uint32_t *id32 = (uint32_t *) (uintptr_t) id; + uint8_t const len = 12; + + id32[0] = at32_uuid[0]; + id32[1] = at32_uuid[1]; + id32[2] = at32_uuid[2]; + + return len; +} + +int board_uart_read(uint8_t *buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const *buf, int len) { +#if CFG_TUSB_OS == OPT_OS_NONE + int txsize = len; + uint16_t timeout = 0xffff; + while (txsize--) { + while (usart_flag_get(PRINT_UART, USART_TDBE_FLAG) == RESET) { + timeout--; + if (timeout == 0) { + return 0; + } + } + PRINT_UART->dt = (*((uint8_t const *) buf) & 0x01FF); + buf++; + } + return len; +#else + (void) buf; + (void) len; + return 0; +#endif +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) { + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} + +void SVC_Handler(void) { +} + +void PendSV_Handler(void) { +} +#endif + +void HardFault_Handler(void) { + __asm("BKPT #0\n"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void); +void _init(void) { +} + +#ifdef USE_FULL_ASSERT +void assert_failed(const char *file, uint32_t line) { + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + e.g.: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ diff --git a/hw/bsp/at32f45x/family.cmake b/hw/bsp/at32f45x/family.cmake new file mode 100644 index 000000000..fe13347af --- /dev/null +++ b/hw/bsp/at32f45x/family.cmake @@ -0,0 +1,97 @@ +include_guard() + +set(AT32_FAMILY at32f45x) +set(AT32_SDK_LIB ${TOP}/hw/mcu/artery/${AT32_FAMILY}/libraries) + +string(TOUPPER ${AT32_FAMILY} AT32_FAMILY_UPPER) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS ${AT32_FAMILY_UPPER} CACHE INTERNAL "") + +#------------------------------------ +# Startup & Linker script +#------------------------------------ +set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf) + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) + add_library(${BOARD_TARGET} STATIC + ${AT32_SDK_LIB}/cmsis/cm4/device_support/system_${AT32_FAMILY}.c + ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_gpio.c + ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_misc.c + ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_usart.c + ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_acc.c + ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_crm.c + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${AT32_SDK_LIB}/cmsis/cm4/core_support + ${AT32_SDK_LIB}/cmsis/cm4/device_support + ${AT32_SDK_LIB}/drivers/inc + ) + + update_board(${BOARD_TARGET}) +endfunction() + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER}) + + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/at32f45x/family.mk b/hw/bsp/at32f45x/family.mk new file mode 100644 index 000000000..e42f27557 --- /dev/null +++ b/hw/bsp/at32f45x/family.mk @@ -0,0 +1,40 @@ +AT32_FAMILY = at32f45x +AT32_SDK_LIB = hw/mcu/artery/${AT32_FAMILY}/libraries + +include $(TOP)/$(BOARD_PATH)/board.mk + +CPU_CORE ?= cortex-m4 + +CFLAGS_GCC += \ + -flto + +CFLAGS += \ + -DCFG_TUSB_MCU=OPT_MCU_AT32F45X \ + +LDFLAGS_GCC += \ + -flto --specs=nosys.specs -nostdlib -nostartfiles + +SRC_C += \ + src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ + $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_gpio.c \ + $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_misc.c \ + $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_usart.c \ + $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_crm.c \ + $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_acc.c \ + $(AT32_SDK_LIB)/cmsis/cm4/device_support/system_${AT32_FAMILY}.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(AT32_SDK_LIB)/drivers/inc \ + $(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/core_support \ + $(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/device_support + +SRC_S_GCC += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s +SRC_S_IAR += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s + +LD_FILE_GCC ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld +LD_FILE_IAR ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf + +flash: flash-atlink diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index baa8422fe..699afda92 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -238,6 +238,7 @@ function(family_add_bloaty TARGET) COMMAND ${BLOATY_EXE} ${OPTION_LIST} $<TARGET_FILE:${TARGET}> VERBATIM) + set_property(TARGET ${TARGET}-bloaty PROPERTY FOLDER ${TARGET}) # post build # add_custom_command(TARGET ${TARGET} POST_BUILD # COMMAND ${BLOATY_EXE} --csv ${OPTION_LIST} $<TARGET_FILE:${TARGET}> > ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}_bloaty.csv @@ -258,12 +259,103 @@ function(family_add_linkermap TARGET) VERBATIM ) + set_property(TARGET ${TARGET}-linkermap PROPERTY FOLDER ${TARGET}) + # post build add_custom_command(TARGET ${TARGET} POST_BUILD COMMAND python ${LINKERMAP_PY} ${OPTION_LIST} $<TARGET_FILE:${TARGET}>.map VERBATIM) endfunction() +# Add membrowse target (installed with pip install membrowse) +function(family_add_membrowse TARGET) + find_program(MEMBROWSE_EXE membrowse) + if (MEMBROWSE_EXE STREQUAL MEMBROWSE_EXE-NOTFOUND) + # force anyway, bash login shell will find it from pip install path + set(MEMBROWSE_EXE membrowse) + endif () + + set(OPTION "") + if (DEFINED MEMBROWSE_OPTION) + string(APPEND OPTION " ${MEMBROWSE_OPTION}") + endif () + + # For Ninja generator, extract all linker scripts from Ninja commands (with INCLUDE) and pass them to membrowse. + if (CMAKE_GENERATOR MATCHES "Ninja") + set(TARGET_ELF_PATH "$<TARGET_FILE_DIR:${TARGET}>/$<TARGET_FILE_NAME:${TARGET}>") + set(MEMBROWSE_LD_SCRIPTS_CMD + "ld_scripts=\"$(${CMAKE_MAKE_PROGRAM} -C ${CMAKE_BINARY_DIR} -t commands ${TARGET} | grep -oP '(?:-Wl,--script=|-T\\s*)\\K[A-Za-z0-9_./-]+\\.ld' | xargs)\"; \ +all_ld_scripts=\"\"; \ +pending_ld_scripts=\"$ld_scripts\"; \ +while [ -n \"$pending_ld_scripts\" ]; do \ + next_pending=\"\"; \ + for script in $pending_ld_scripts; do \ + case \" $all_ld_scripts \" in *\" $script \"*) continue ;; esac; \ + all_ld_scripts=\"$all_ld_scripts $script\"; \ + script_dir=$(dirname \"$script\"); \ + include_scripts=$(grep -hoP '^\\s*INCLUDE\\s+[<\"]?\\K[^\">[:space:]]+\\.ld' \"$script\" 2>/dev/null | xargs); \ + for include_script in $include_scripts; do \ + resolved_script=\"\"; \ + if [ -f \"$include_script\" ]; then \ + resolved_script=\"$include_script\"; \ + elif [ -f \"$script_dir/$include_script\" ]; then \ + resolved_script=\"$script_dir/$include_script\"; \ + fi; \ + if [ -n \"$resolved_script\" ]; then \ + case \" $all_ld_scripts $next_pending \" in *\" $resolved_script \"*) ;; *) next_pending=\"$next_pending $resolved_script\" ;; esac; \ + fi; \ + done; \ + done; \ + pending_ld_scripts=\"$(echo \"$next_pending\" | xargs)\"; \ +done; \ +ld_scripts=\"$(echo \"$all_ld_scripts\" | xargs)\"") + set(MEMBROWSE_LD_DEFS_CMD + "ld_symbols=\"$(${CMAKE_MAKE_PROGRAM} -C ${CMAKE_BINARY_DIR} -t commands ${TARGET} | grep -oP '(?<=--defsym[=,])[^[:space:]]+' | xargs)\"; \ +ld_defs=\"\"; \ +for symbol in $ld_symbols; do \ + ld_defs=\"$ld_defs --def $symbol\"; \ +done; \ +ld_defs=\"$(echo \"$ld_defs\" | xargs)\"") + set(MEMBROWSE_PREPARE_CMD + "if [ -f \"${TARGET_ELF_PATH}\" ]; then \ + ${MEMBROWSE_LD_SCRIPTS_CMD}; \ + ${MEMBROWSE_LD_DEFS_CMD}; \ + if [ \"$MEMBROWSE_UPLOAD\" = \"1\" ]; then \ + MEMBROWSE_CMD=\"${MEMBROWSE_EXE} report ${OPTION} \\\"${TARGET_ELF_PATH}\\\" \\\"$ld_scripts\\\" $ld_defs --upload --github --target-name ${BOARD}/${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}\"; \ + else \ + MEMBROWSE_CMD=\"${MEMBROWSE_EXE} report ${OPTION} \\\"${TARGET_ELF_PATH}\\\" \\\"$ld_scripts\\\" $ld_defs\"; \ + fi; \ +else \ + if [ \"$MEMBROWSE_UPLOAD\" = \"1\" ]; then \ + MEMBROWSE_CMD=\"${MEMBROWSE_EXE} report ${OPTION} --identical --upload --github --target-name ${BOARD}/${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}\"; \ + else \ + MEMBROWSE_CMD=\"${MEMBROWSE_EXE} report ${OPTION} --identical\"; \ + fi; \ +fi; \ +echo \"$MEMBROWSE_CMD\"") + + add_custom_target(${TARGET}-membrowse + DEPENDS ${TARGET} + COMMAND ${CMAKE_COMMAND} -E env MEMBROWSE_UPLOAD=0 bash -lc "${MEMBROWSE_PREPARE_CMD}; eval \"$MEMBROWSE_CMD\"" + VERBATIM + ) + set_property(TARGET ${TARGET}-membrowse PROPERTY FOLDER ${TARGET}) + + add_custom_target(${TARGET}-membrowse-upload + COMMAND ${CMAKE_COMMAND} -E env MEMBROWSE_UPLOAD=1 bash -lc "${MEMBROWSE_PREPARE_CMD}; eval \"$MEMBROWSE_CMD\"" + VERBATIM + ) + + if (NOT TARGET examples-membrowse-upload) + add_custom_target(examples-membrowse-upload) + endif () + add_dependencies(examples-membrowse-upload ${TARGET}-membrowse-upload) + + set_property(TARGET ${TARGET}-membrowse-upload PROPERTY FOLDER ${TARGET}) + endif () +endfunction() + + #------------------------------------------------------------- # Common Target Configure # Most families use these settings except rp2040 and espressif @@ -377,6 +469,7 @@ function(family_configure_common TARGET RTOS) # Analyze size with bloaty and linkermap family_add_bloaty(${TARGET}) family_add_linkermap(${TARGET}) + family_add_membrowse(${TARGET}) endif () # run size after build @@ -508,6 +601,8 @@ exit" COMMAND ${JLINKEXE} -device ${JLINK_DEVICE} ${OPTION_LIST} -if ${JLINK_IF} -JTAGConf -1,-1 -speed auto -CommandFile $<TARGET_FILE_DIR:${BINARY_TARGET}>/${BINARY_TARGET}.jlink VERBATIM ) + + set_property(TARGET ${NAME_TARGET}-jlink PROPERTY FOLDER ${TARGET}) endfunction() @@ -521,6 +616,8 @@ function(family_flash_stlink TARGET) DEPENDS ${TARGET} COMMAND ${STM32_PROGRAMMER_CLI} --connect port=swd --write $<TARGET_FILE:${TARGET}> --go ) + + set_property(TARGET ${TARGET}-stlink PROPERTY FOLDER ${TARGET}) endfunction() @@ -534,6 +631,8 @@ function(family_flash_stflash TARGET) DEPENDS ${TARGET} COMMAND ${ST_FLASH} write $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.bin 0x8000000 ) + + set_property(TARGET ${TARGET}-stflash PROPERTY FOLDER ${TARGET}) endfunction() @@ -560,6 +659,8 @@ function(family_flash_openocd TARGET) COMMAND ${OPENOCD} -c "tcl_port disabled; gdb_port disabled" ${OPTION_LIST} -c "init; halt; program $<TARGET_FILE:${TARGET}>" -c reset ${OPTION_LIST2} -c exit VERBATIM ) + + set_property(TARGET ${TARGET}-openocd PROPERTY FOLDER ${TARGET}) endfunction() @@ -621,6 +722,8 @@ function(family_flash_wlink_rs TARGET) DEPENDS ${TARGET} COMMAND ${WLINK_RS} flash $<TARGET_FILE:${TARGET}> ) + + set_property(TARGET ${TARGET}-wlink-rs PROPERTY FOLDER ${TARGET}) endfunction() @@ -634,6 +737,8 @@ function(family_flash_pyocd TARGET) DEPENDS ${TARGET} COMMAND ${PYOCD} flash -t ${PYOCD_TARGET} $<TARGET_FILE:${TARGET}> ) + + set_property(TARGET ${TARGET}-pyocd PROPERTY FOLDER ${TARGET}) endfunction() @@ -643,6 +748,7 @@ function(family_flash_uf2 TARGET FAMILY_ID) DEPENDS ${TARGET} COMMAND python ${UF2CONV_PY} -f ${FAMILY_ID} --deploy $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.uf2 ) + set_property(TARGET ${TARGET}-uf2 PROPERTY FOLDER ${TARGET}) endfunction() @@ -657,6 +763,8 @@ function(family_flash_teensy TARGET) COMMAND ${CMAKE_OBJCOPY} -Oihex $<TARGET_FILE:${TARGET}> $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.hex COMMAND ${TEENSY_CLI} --mcu=${TEENSY_MCU} -w -s $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.hex ) + + set_property(TARGET ${TARGET}-teensy PROPERTY FOLDER ${TARGET}) endfunction() @@ -675,6 +783,8 @@ function(family_flash_nxplink TARGET) DEPENDS ${TARGET} COMMAND ${LINKSERVER_PATH} flash ${NXPLINK_DEVICE} load $<TARGET_FILE:${TARGET}> ) + + set_property(TARGET ${TARGET}-nxplink PROPERTY FOLDER ${TARGET}) endfunction() @@ -688,6 +798,8 @@ function(family_flash_dfu_util TARGET OPTION) COMMAND ${DFU_UTIL} -R -d ${DFU_UTIL_VID_PID} -a 0 -D $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.bin VERBATIM ) + + set_property(TARGET ${TARGET}-dfu-util PROPERTY FOLDER ${TARGET}) endfunction() function(family_flash_msp430flasher TARGET) @@ -703,6 +815,8 @@ function(family_flash_msp430flasher TARGET) COMMAND ${CMAKE_COMMAND} -E env LD_LIBRARY_PATH=${MSP430FLASHER_PARENT_DIR} ${MSP430FLASHER} -w $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.hex -z [VCC] ) + + set_property(TARGET ${TARGET}-msp430flasher PROPERTY FOLDER ${TARGET}) endfunction() function(family_flash_uniflash TARGET) @@ -717,6 +831,8 @@ function(family_flash_uniflash TARGET) COMMAND ${DSLITE} ${UNIFLASH_OPTION} -f $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.hex VERBATIM ) + + set_property(TARGET ${TARGET}-uniflash PROPERTY FOLDER ${TARGET}) endfunction() #---------------------------------- diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 1602e35eb..82d0034a1 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -157,10 +157,12 @@ target_link_libraries(tinyusb_bsp INTERFACE # tinyusb_additions will hold our extra settings for examples add_library(tinyusb_additions INTERFACE) +if (PICO_PLATFORM STREQUAL rp2040) target_compile_definitions(tinyusb_additions INTERFACE PICO_RP2040_USB_DEVICE_ENUMERATION_FIX=1 PICO_RP2040_USB_DEVICE_UFRAME_FIX=1 -) + ) +endif () if(LOGGER STREQUAL "RTT" OR LOGGER STREQUAL "rtt") target_compile_definitions(tinyusb_additions INTERFACE @@ -248,8 +250,10 @@ function(family_configure_target TARGET RTOS) family_flash_openocd(${TARGET}) family_flash_jlink(${TARGET}) - # Generate linkermap target and post build. LINKERMAP_OPTION can be set with -D to change default options + # Generate linkermap target and post build. LINKERMAP_OPTION can be set with -D to change default options + family_add_bloaty(${TARGET}) family_add_linkermap(${TARGET}) + family_add_membrowse(${TARGET}) endfunction() diff --git a/hw/bsp/stm32f2/family.c b/hw/bsp/stm32f2/family.c index 9c78cf7dd..d6a0cb827 100644 --- a/hw/bsp/stm32f2/family.c +++ b/hw/bsp/stm32f2/family.c @@ -31,7 +31,6 @@ #include "stm32f2xx_hal.h" #include "bsp/board_api.h" #include "board.h" - //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ @@ -105,9 +104,12 @@ void board_init(void) { /* Enable USB FS Clocks */ __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); +#if CFG_TUD_ENABLED // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = true; + tud_configure(0, TUD_CFGID_DWC2, &cfg); +#endif } //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h index 11e976a42..2db42b98a 100644 --- a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h +++ b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h @@ -43,6 +43,8 @@ #define PINID_UART_TX 2 #define PINID_UART_RX 3 +#define VBUS_SENSE_EN 1 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOC, @@ -106,14 +108,6 @@ static inline void board_clock_init(void) __HAL_RCC_USART3_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - if (rhport == 0) { - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { (void) rhport; (void) state; } diff --git a/hw/bsp/stm32f4/boards/pyboardv11/board.h b/hw/bsp/stm32f4/boards/pyboardv11/board.h index 9583a924b..319d2336a 100644 --- a/hw/bsp/stm32f4/boards/pyboardv11/board.h +++ b/hw/bsp/stm32f4/boards/pyboardv11/board.h @@ -43,6 +43,8 @@ #define PINID_UART_TX 2 #define PINID_UART_RX 3 +#define VBUS_SENSE_EN 1 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOB, @@ -106,14 +108,6 @@ static inline void board_clock_init(void) __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - if (rhport == 0) { - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { (void) rhport; (void) state; } diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h index 8a3fe8409..b69ebbeaf 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h @@ -44,6 +44,8 @@ #define PINID_UART_TX 2 #define PINID_UART_RX 3 +#define VBUS_SENSE_EN 0 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOC, @@ -107,15 +109,6 @@ static inline void board_clock_init(void) __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - // Blackpill doesn't use VBUS sense (B device) explicitly disable it - if (rhport == 0) { - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { (void) rhport; (void) state; } diff --git a/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h b/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h index effbf2be8..ebefeb988 100644 --- a/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h +++ b/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h @@ -44,6 +44,8 @@ #define PINID_UART_TX 2 #define PINID_UART_RX 3 +#define VBUS_SENSE_EN 0 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOA, @@ -106,15 +108,6 @@ static inline void board_clock_init(void) __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - if (rhport == 0) { - // Black F407VET6 doesn't use VBUS sense (B device) explicitly disable it - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { (void) rhport; (void) state; } diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/board.h b/hw/bsp/stm32f4/boards/stm32f407disco/board.h index 19a029768..bcfa6059a 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f407disco/board.h @@ -46,6 +46,8 @@ #define PINID_UART_RX 3 #define PINID_VBUS0_EN 4 +#define VBUS_SENSE_EN 1 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOD, @@ -114,14 +116,6 @@ static inline void board_clock_init(void) __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - if (rhport == 0) { - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { if (rhport == 0) { board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h index 61e5de70d..0faf6fe11 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h @@ -43,6 +43,8 @@ #define PINID_UART_TX 2 #define PINID_UART_RX 3 +#define VBUS_SENSE_EN 0 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOC, @@ -106,15 +108,6 @@ static inline void board_clock_init(void) __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - // Blackpill doesn't use VBUS sense (B device) explicitly disable it - if (rhport == 0) { - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { (void) rhport; (void) state; } diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/board.h b/hw/bsp/stm32f4/boards/stm32f411disco/board.h index d7b02e79d..1a289dfb5 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411disco/board.h @@ -44,6 +44,8 @@ #define PINID_UART_RX 3 #define PINID_VBUS0_EN 4 +#define VBUS_SENSE_EN 1 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOD, @@ -111,14 +113,6 @@ static inline void board_clock_init(void) { __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - // Enable VBUS sense (B device) via pin PA9 - if (rhport == 0) { - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { if (rhport == 0) { board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/board.h b/hw/bsp/stm32f4/boards/stm32f412disco/board.h index d5146ae3c..0689dfe87 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f412disco/board.h @@ -45,6 +45,8 @@ #define PINID_UART_RX 3 #define PINID_VBUS0_EN 4 +#define VBUS_SENSE_EN 1 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOE, @@ -127,13 +129,6 @@ static inline void board_clock_init(void) { __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - if (rhport == 0) { - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { if (rhport == 0) { board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h index f7026ce61..be58f8ae7 100644 --- a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h +++ b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h @@ -45,6 +45,8 @@ #define PINID_UART_RX 3 #define PINID_VBUS0_EN 4 +#define VBUS_SENSE_EN 1 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOB, @@ -128,13 +130,6 @@ static inline void board_clock_init(void) __HAL_RCC_USART3_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - if (rhport == 0) { - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { if (rhport == 0) { board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h index 9a348f33f..b1633b395 100644 --- a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h @@ -46,6 +46,8 @@ #define PINID_UART_RX 3 #define PINID_VBUS0_EN 4 +#define VBUS_SENSE_EN 1 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOB, @@ -117,14 +119,6 @@ static inline void board_clock_init(void) __HAL_RCC_USART3_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - if (rhport == 0) { - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { if (rhport == 0) { board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; diff --git a/hw/bsp/stm32f4/family.c b/hw/bsp/stm32f4/family.c index 025f6a08c..f0e9620f2 100644 --- a/hw/bsp/stm32f4/family.c +++ b/hw/bsp/stm32f4/family.c @@ -180,11 +180,14 @@ void board_init(void) { #endif #if CFG_TUD_ENABLED - board_vbus_sense_init(BOARD_TUD_RHPORT); + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = VBUS_SENSE_EN; + tud_configure(BOARD_TUD_RHPORT, TUD_CFGID_DWC2, &cfg); + board_vbus_set(BOARD_TUD_RHPORT, false); #endif #if CFG_TUH_ENABLED - board_vbus_set(BOARD_TUD_RHPORT, true); + board_vbus_set(BOARD_TUH_RHPORT, true); #endif } diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.h b/hw/bsp/stm32f7/boards/stm32f723disco/board.h index 35102c1f2..ca9641c68 100644 --- a/hw/bsp/stm32f7/boards/stm32f723disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.h @@ -41,7 +41,7 @@ // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 0 +#define OTG_HS_VBUS_SENSE 1 #define PINID_LED 0 #define PINID_BUTTON 1 diff --git a/hw/bsp/stm32f7/boards/stm32f746disco/board.h b/hw/bsp/stm32f7/boards/stm32f746disco/board.h index 2964ebada..f57ffb317 100644 --- a/hw/bsp/stm32f7/boards/stm32f746disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f746disco/board.h @@ -40,8 +40,8 @@ #define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE // VBUS Sense detection -#define OTG_FS_VBUS_SENSE 0 -#define OTG_HS_VBUS_SENSE 0 +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 1 #define PINID_LED 0 #define PINID_BUTTON 1 diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c index ac22c606f..d8f0da201 100644 --- a/hw/bsp/stm32f7/family.c +++ b/hw/bsp/stm32f7/family.c @@ -154,18 +154,14 @@ void board_init(void) { GPIO_InitStruct.Mode = GPIO_MODE_INPUT; GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -#else - // Disable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; #endif // vbus sense +#if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0 + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = OTG_FS_VBUS_SENSE; + tud_configure(0, TUD_CFGID_DWC2, &cfg); +#endif + //------------- rhport1: OTG_HS -------------// #ifdef USB_HS_PHYC // MCU with built-in HS PHY such as F723, F733, F730 @@ -178,9 +174,6 @@ void board_init(void) { GPIO_InitStruct.Alternate = GPIO_AF12_OTG_HS_FS; HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); - // Enable HS VBUS sense (B device) via pin PB13 - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBDEN; - /* Configure OTG-HS ID pin */ GPIO_InitStruct.Pin = GPIO_PIN_13; GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; @@ -243,17 +236,16 @@ void board_init(void) { __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); -#if OTG_HS_VBUS_SENSE - #error OTG HS VBUS Sense enabled is not implemented -#else - // No VBUS sense - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; +#if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1 + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = OTG_HS_VBUS_SENSE; + tud_configure(1, TUD_CFGID_DWC2, &cfg); #endif + // Turn off device vbus +#if CFG_TUD_ENABLED + board_vbus_set(BOARD_TUD_RHPORT, false); +#endif // Turn on host vbus #if CFG_TUH_ENABLED board_vbus_set(BOARD_TUH_RHPORT, true); diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h index 96bfc24e1..44ca58dc5 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -44,7 +44,7 @@ // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 0 +#define OTG_HS_VBUS_SENSE 1 // USB HS External PHY Pin: CLK, STP, DIR, NXT, D0-D7 #define ULPI_PINS \ diff --git a/hw/bsp/stm32h7/boards/stm32h747disco/board.cmake b/hw/bsp/stm32h7/boards/stm32h747disco/board.cmake new file mode 100644 index 000000000..8bce542a5 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h747disco/board.cmake @@ -0,0 +1,23 @@ +set(MCU_VARIANT stm32h747xx) +set(JLINK_DEVICE stm32h747xi_m7) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/${MCU_VARIANT}_flash_CM7.ld) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash_CM7.icf) + +set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) + +# device default to PORT 1 High Speed +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 1) +endif() + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32H747xx + HSE_VALUE=25000000 + CORE_CM7 + ) +endfunction() diff --git a/hw/bsp/stm32h7/boards/stm32h747disco/board.h b/hw/bsp/stm32h7/boards/stm32h747disco/board.h new file mode 100644 index 000000000..458aa48b6 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h747disco/board.h @@ -0,0 +1,169 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: STM32 H745 Discovery + url: https://www.st.com/en/evaluation-tools/stm32h745i-disco.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// UART +#define UART_DEV USART3 +#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 1 + +// USB HS External PHY Pin: CLK, STP, DIR, NXT, D0-D7 +#define ULPI_PINS \ + {GPIOA, GPIO_PIN_3 }, {GPIOA, GPIO_PIN_5 }, {GPIOB, GPIO_PIN_0 }, {GPIOB, GPIO_PIN_1 }, \ + {GPIOB, GPIO_PIN_5 }, {GPIOB, GPIO_PIN_10}, {GPIOB, GPIO_PIN_11}, {GPIOB, GPIO_PIN_12}, \ + {GPIOB, GPIO_PIN_13}, {GPIOC, GPIO_PIN_0 }, {GPIOH, GPIO_PIN_4 }, {GPIOI, GPIO_PIN_11} + +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOI, + .pin_init = { .Pin = GPIO_PIN_12, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + } +}; + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void SystemClock_Config(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; + RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = { 0 }; + + /*!< Supply configuration update enable */ + /* For STM32H750XB, use "HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);" */ + HAL_PWREx_ConfigSupply(PWR_DIRECT_SMPS_SUPPLY); + + /* The voltage scaling allows optimizing the power consumption when the + device is clocked below the maximum system frequency, to update the + voltage scaling value regarding system frequency refer to product + datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + while ((PWR->D3CR & (PWR_D3CR_VOSRDY)) != PWR_D3CR_VOSRDY) {} + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.HSIState = RCC_HSI_OFF; + RCC_OscInitStruct.CSIState = RCC_CSI_OFF; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + + /* PLL1 for System Clock */ + RCC_OscInitStruct.PLL.PLLM = 5; + RCC_OscInitStruct.PLL.PLLN = 160; + RCC_OscInitStruct.PLL.PLLFRACN = 0; + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLR = 2; + RCC_OscInitStruct.PLL.PLLQ = 4; + + RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* PLL3 for USB Clock */ + PeriphClkInitStruct.PLL3.PLL3M = 25; + PeriphClkInitStruct.PLL3.PLL3N = 336; + PeriphClkInitStruct.PLL3.PLL3FRACN = 0; + PeriphClkInitStruct.PLL3.PLL3P = 2; + PeriphClkInitStruct.PLL3.PLL3R = 2; + PeriphClkInitStruct.PLL3.PLL3Q = 7; + + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Select PLL as system clock source and configure bus clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | \ + RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1); + + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; + RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); + + /*activate CSI clock mondatory for I/O Compensation Cell*/ + __HAL_RCC_CSI_ENABLE() ; + + /* Enable SYSCFG clock mondatory for I/O Compensation Cell */ + __HAL_RCC_SYSCFG_CLK_ENABLE() ; + + /* Enables the I/O Compensation Cell */ + HAL_EnableCompensationCell(); +} + +static inline void board_init2(void) { + // For this board does nothing +} + +void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; + (void) state; +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/stm32h7/boards/stm32h747disco/board.mk b/hw/bsp/stm32h7/boards/stm32h747disco/board.mk new file mode 100644 index 000000000..4b17246e2 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h747disco/board.mk @@ -0,0 +1,15 @@ +# STM32H747I-DISCO uses OTG_FS +# FIXME: Reset enumerates, un/replug USB plug does not enumerate +MCU_VARIANT = stm32h747xx +CFLAGS += -DSTM32H747xx -DCORE_CM7 -DHSE_VALUE=25000000 + +# Default is FulSpeed port +PORT ?= 0 + +LD_FILE_GCC = $(FAMILY_PATH)/linker/${MCU_VARIANT}_flash_CM7.ld +LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h747xx_flash_CM7.icf + +# For flash-jlink target +JLINK_DEVICE = stm32h747xi_m7 +# flash target using on-board stlink +flash: flash-stlink diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index 054d7855f..a320a7e72 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -180,18 +180,14 @@ void board_init(void) { GPIO_InitStruct.Mode = GPIO_MODE_INPUT; GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -#else - // Disable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; #endif // vbus sense +#if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0 + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = OTG_FS_VBUS_SENSE; + tud_configure(0, TUD_CFGID_DWC2, &cfg); +#endif + //------------- USB HS -------------// #if (CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1) || (CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 1) // Despite being call USB2_OTG @@ -216,28 +212,24 @@ void board_init(void) { __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE(); __HAL_RCC_USB1_OTG_HS_CLK_ENABLE(); -#if OTG_HS_VBUS_SENSE - #error OTG HS VBUS Sense enabled is not implemented -#else - // No VBUS sense - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; -#endif - - // Force device mode - USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; - USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; + #if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1 + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = OTG_HS_VBUS_SENSE; + tud_configure(1, TUD_CFGID_DWC2, &cfg); + #endif #endif HAL_PWREx_EnableUSBVoltageDetector(); board_init2(); // optional init + // Turn off device vbus +#if CFG_TUD_ENABLED + board_vbus_set(BOARD_TUD_RHPORT, false); +#endif + // Turn on host vbus #if CFG_TUH_ENABLED - board_vbus_set(BOARD_TUH_RHPORT, 1); + board_vbus_set(BOARD_TUH_RHPORT, true); #endif } diff --git a/hw/bsp/stm32h7/linker/stm32h747xx_flash_CM7.ld b/hw/bsp/stm32h7/linker/stm32h747xx_flash_CM7.ld new file mode 100644 index 000000000..5b7fe4528 --- /dev/null +++ b/hw/bsp/stm32h7/linker/stm32h747xx_flash_CM7.ld @@ -0,0 +1,184 @@ +/* +****************************************************************************** +** + +** File : LinkerScript.ld +** +** +** Abstract : Linker script for STM32H7 series +** 1024Kbytes FLASH and 192Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +** Copyright (c) 2019 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +****************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K +ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : + { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + .ARM : + { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake index 7b3456585..189c175dd 100644 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake @@ -2,6 +2,8 @@ set(MCU_VARIANT stm32h7s3xx) set(JLINK_DEVICE stm32h7s3l8) set(LD_FILE_Clang ${LD_FILE_GNU}) +set(RHPORT_DEVICE 1) +set(RHPORT_HOST 1) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h index 58adf2664..4b8564709 100644 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h @@ -44,7 +44,7 @@ #define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE // VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 +#define OTG_FS_VBUS_SENSE 0 #define OTG_HS_VBUS_SENSE 0 #define PINID_LED 0 diff --git a/hw/bsp/stm32h7rs/family.c b/hw/bsp/stm32h7rs/family.c index 784c92465..2cc39b7ac 100644 --- a/hw/bsp/stm32h7rs/family.c +++ b/hw/bsp/stm32h7rs/family.c @@ -356,17 +356,14 @@ void board_init(void) { GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; HAL_GPIO_Init(GPIOM, &GPIO_InitStruct); +#endif // vbus sense - // Enable VBUS sense (B device) via pin PM14 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -#else - // Disable VBUS sense (B device) - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; +#if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0 + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = OTG_FS_VBUS_SENSE; + tud_configure(0, TUD_CFGID_DWC2, &cfg); +#endif - // B-peripheral session valid override enable - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; -#endif // vbus sense #endif //------------- USB HS -------------// @@ -382,33 +379,31 @@ void board_init(void) { #if OTG_HS_VBUS_SENSE // Configure VBUS Pin - GPIO_InitStruct.Pin = GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; - HAL_GPIO_Init(GPIOM, &GPIO_InitStruct); - - // Enable VBUS sense (B device) via pin PM9 - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBDEN; -#else - // Disable VBUS sense (B device) - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + GPIO_InitTypeDef GPIO_InitStruct2; + GPIO_InitStruct2.Pin = GPIO_PIN_8; + GPIO_InitStruct2.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct2.Pull = GPIO_NOPULL; + GPIO_InitStruct2.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOM, &GPIO_InitStruct2); +#endif #if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1 - // B-peripheral session valid override enable - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALEXTOEN; - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALOVAL; -#else - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_PULLDOWNEN; + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = OTG_HS_VBUS_SENSE; + tud_configure(1, TUD_CFGID_DWC2, &cfg); #endif #endif -#endif board_init2(); + // Turn off device vbus +#if CFG_TUD_ENABLED + board_vbus_set(BOARD_TUD_RHPORT, false); +#endif + // Turn on host vbus #if CFG_TUH_ENABLED - board_vbus_set(BOARD_TUH_RHPORT, 1); + board_vbus_set(BOARD_TUH_RHPORT, true); #endif } diff --git a/hw/bsp/stm32h7rs/family.cmake b/hw/bsp/stm32h7rs/family.cmake index 1fd1cb057..3b9dbf5cf 100644 --- a/hw/bsp/stm32h7rs/family.cmake +++ b/hw/bsp/stm32h7rs/family.cmake @@ -24,7 +24,7 @@ if (NOT DEFINED RHPORT_DEVICE) set(RHPORT_DEVICE 1) endif () if (NOT DEFINED RHPORT_HOST) - set(RHPORT_HOST 1) + set(RHPORT_HOST 0) endif () if (NOT DEFINED RHPORT_SPEED) diff --git a/hw/bsp/stm32l4/boards/stm32l476disco/board.h b/hw/bsp/stm32l4/boards/stm32l476disco/board.h index 8c766d8ea..cf84d3e66 100644 --- a/hw/bsp/stm32l4/boards/stm32l476disco/board.h +++ b/hw/bsp/stm32l4/boards/stm32l476disco/board.h @@ -51,6 +51,8 @@ #define UART_TX_PIN GPIO_PIN_5 #define UART_RX_PIN GPIO_PIN_6 +#define VBUS_SENSE_EN 0 + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -128,15 +130,6 @@ static inline void board_clock_init(void) HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); } -static inline void board_vbus_sense_init(void) -{ - // L476Disco use general GPIO PC11 for VBUS sensing instead of dedicated PA9 as others - // Disable VBUS Sense and force device mode - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN | USB_OTG_GOTGCTL_BVALOVAL; -} - #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32l4/boards/stm32l496nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.h index 607210cec..3b031e00f 100644 --- a/hw/bsp/stm32l4/boards/stm32l496nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.h @@ -52,6 +52,8 @@ #define UART_TX_PIN GPIO_PIN_7 #define UART_RX_PIN GPIO_PIN_8 +#define VBUS_SENSE_EN 1 + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -145,12 +147,6 @@ static inline void board_clock_init(void) HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); } -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -} - #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h index f522e7522..94978638e 100644 --- a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h @@ -51,6 +51,8 @@ #define UART_TX_PIN GPIO_PIN_7 #define UART_RX_PIN GPIO_PIN_8 +#define VBUS_SENSE_EN 1 + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -129,12 +131,6 @@ static inline void board_clock_init(void) HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); } -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -} - #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h index c181f5d4a..f603ae855 100644 --- a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h @@ -51,6 +51,8 @@ #define UART_TX_PIN GPIO_PIN_7 #define UART_RX_PIN GPIO_PIN_8 +#define VBUS_SENSE_EN 1 + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -129,12 +131,6 @@ static inline void board_clock_init(void) HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); } -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -} - #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32l4/family.c b/hw/bsp/stm32l4/family.c index e69ae8e3b..65f6b9ab3 100644 --- a/hw/bsp/stm32l4/family.c +++ b/hw/bsp/stm32l4/family.c @@ -170,10 +170,16 @@ void board_init(void) { HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); #endif - /* Enable USB FS Clocks */ #if defined(USB_OTG_FS) + /* Enable USB FS Clocks */ __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - board_vbus_sense_init(); + + #if CFG_TUD_ENABLED + /* Set Vbus sense */ + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = VBUS_SENSE_EN; + tud_configure(0, TUD_CFGID_DWC2, &cfg); + #endif #else __HAL_RCC_USB_CLK_ENABLE(); #endif diff --git a/hw/bsp/stm32n6/boards/stm32n6570dk/board.cmake b/hw/bsp/stm32n6/boards/stm32n6570dk/board.cmake index e88efefb9..00efc974c 100644 --- a/hw/bsp/stm32n6/boards/stm32n6570dk/board.cmake +++ b/hw/bsp/stm32n6/boards/stm32n6570dk/board.cmake @@ -1,5 +1,5 @@ set(MCU_VARIANT stm32n657xx) -set(JLINK_DEVICE stm32n6xx) +set(JLINK_DEVICE stm32n657x0) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32N657XX_AXISRAM2_fsbl.ld) diff --git a/hw/bsp/stm32n6/boards/stm32n6570dk/board.h b/hw/bsp/stm32n6/boards/stm32n6570dk/board.h index bbcad6340..8c2ec66dc 100644 --- a/hw/bsp/stm32n6/boards/stm32n6570dk/board.h +++ b/hw/bsp/stm32n6/boards/stm32n6570dk/board.h @@ -44,17 +44,16 @@ extern "C" { #define UART_DEV USART1 #define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE -#define BOARD_TUD_RHPORT 1 - // VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 1 +#define OTG_FS_VBUS_SENSE 0 +#define OTG_HS_VBUS_SENSE 0 #define PINID_LED 0 #define PINID_BUTTON 1 #define PINID_UART_TX 2 #define PINID_UART_RX 3 #define PINID_TCPP0203_EN 4 +#define PINID_PWR_USB2 8 static board_pindef_t board_pindef[] = { {// LED @@ -77,21 +76,22 @@ static board_pindef_t board_pindef[] = { .port = GPIOA, .pin_init = {.Pin = GPIO_PIN_4, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, .active_state = 0}, - { - // I2C SCL for TCPP0203 - .port = GPIOD, - .pin_init = {.Pin = GPIO_PIN_14, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, + { // I2C SCL for TCPP0203 + .port = GPIOD, + .pin_init = {.Pin = GPIO_PIN_14, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, }, - { - // I2C SDA for TCPP0203 - .port = GPIOD, - .pin_init = {.Pin = GPIO_PIN_4, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, + {// I2C SDA for TCPP0203 + .port = GPIOD, + .pin_init = {.Pin = GPIO_PIN_4, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, }, - { - // INT for TCPP0203 - .port = GPIOD, - .pin_init = {.Pin = GPIO_PIN_10, .Mode = GPIO_MODE_IT_FALLING, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, + {// INT for TCPP0203 + .port = GPIOD, + .pin_init = {.Pin = GPIO_PIN_10, .Mode = GPIO_MODE_IT_FALLING, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, }, + {// PWR for USB2 + .port = GPIOB, + .pin_init = {.Pin = GPIO_PIN_9, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, + } }; //--------------------------------------------------------------------+ @@ -262,9 +262,12 @@ static inline void board_init2(void) { } void board_vbus_set(uint8_t rhport, bool state) { - (void) state; - if (rhport == 1) { - TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, TCPP0203_GD_PROVIDER_SWITCH_CLOSED) == TCPP0203_OK, ); + if (rhport == 0) { + uint8_t switch_state = state ? TCPP0203_GD_PROVIDER_SWITCH_CLOSED : TCPP0203_GD_PROVIDER_SWITCH_OPEN; + TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, switch_state) == TCPP0203_OK, ); + } else if (rhport == 1) { + board_pindef_t *pindef = &board_pindef[PINID_PWR_USB2]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, state ? GPIO_PIN_SET : GPIO_PIN_RESET); } } diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake index e88efefb9..e682cabcb 100644 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake @@ -1,8 +1,15 @@ set(MCU_VARIANT stm32n657xx) -set(JLINK_DEVICE stm32n6xx) +set(JLINK_DEVICE stm32n657x0) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32N657XX_AXISRAM2_fsbl.ld) +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 0) +endif () +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif () + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32N657xx diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h index 33c68f7cf..5bdbaff3c 100644 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h @@ -44,11 +44,9 @@ extern "C" { #define UART_DEV USART1 #define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE -#define BOARD_TUD_RHPORT 1 - // VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 1 +#define OTG_FS_VBUS_SENSE 0 +#define OTG_HS_VBUS_SENSE 0 #define PINID_LED 0 #define PINID_BUTTON 1 @@ -77,20 +75,17 @@ static board_pindef_t board_pindef[] = { .port = GPIOA, .pin_init = {.Pin = GPIO_PIN_7, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, .active_state = 0}, - { - // I2C SCL for TCPP0203 - .port = GPIOB, - .pin_init = {.Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, + {// I2C SCL for TCPP0203 + .port = GPIOB, + .pin_init = {.Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, }, - { - // I2C SDA for TCPP0203 - .port = GPIOB, - .pin_init = {.Pin = GPIO_PIN_11, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, + {// I2C SDA for TCPP0203 + .port = GPIOB, + .pin_init = {.Pin = GPIO_PIN_11, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, }, - { - // INT for TCPP0203 - .port = GPIOD, - .pin_init = {.Pin = GPIO_PIN_2, .Mode = GPIO_MODE_IT_FALLING, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, + {// INT for TCPP0203 + .port = GPIOD, + .pin_init = {.Pin = GPIO_PIN_2, .Mode = GPIO_MODE_IT_FALLING, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, }, }; @@ -262,9 +257,9 @@ static inline void board_init2(void) { } void board_vbus_set(uint8_t rhport, bool state) { - (void) state; - if (rhport == 1) { - TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, TCPP0203_GD_PROVIDER_SWITCH_CLOSED) == TCPP0203_OK, ); + if (rhport == 0) { + uint8_t switch_state = state ? TCPP0203_GD_PROVIDER_SWITCH_CLOSED : TCPP0203_GD_PROVIDER_SWITCH_OPEN; + TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, switch_state) == TCPP0203_OK, ); } } diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk index 05717699c..efbb82611 100644 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk @@ -1,9 +1,12 @@ MCU_VARIANT = stm32n657xx CFLAGS += -DSTM32N657xx -JLINK_DEVICE = stm32n6xx +JLINK_DEVICE = stm32n657x0 LD_FILE_GCC = $(BOARD_PATH)/STM32N657XX_AXISRAM2_fsbl.ld +RHPORT_DEVICE ?= 0 +RHPORT_HOST ?= 0 + # flash target using on-board stlink flash: flash-stlink diff --git a/hw/bsp/stm32n6/family.c b/hw/bsp/stm32n6/family.c index 567bb7294..c839e6b3e 100644 --- a/hw/bsp/stm32n6/family.c +++ b/hw/bsp/stm32n6/family.c @@ -48,7 +48,8 @@ TU_ATTR_UNUSED static void Error_Handler(void) { } void HardFault_Handler(void); - +static void MPU_Config(void); +static void SystemIsolation_Config(void); typedef struct { GPIO_TypeDef* port; GPIO_InitTypeDef pin_init; @@ -87,20 +88,25 @@ static UART_HandleTypeDef UartHandle = { // Despite being call USB2_OTG_FS on some MCUs // OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port void USB2_OTG_HS_IRQHandler(void) { - tusb_int_handler(0, true); + tusb_int_handler(1, true); } // Despite being call USB1_OTG_HS on some MCUs // OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port void USB1_OTG_HS_IRQHandler(void) { - tusb_int_handler(1, true); + tusb_int_handler(0, true); } void board_init(void) { - /* Enable BusFault and SecureFault handlers (HardFault is default) */ SCB->SHCSR |= (SCB_SHCSR_BUSFAULTENA_Msk | SCB_SHCSR_SECUREFAULTENA_Msk); + MPU_Config(); + SystemIsolation_Config(); + + SCB_EnableICache(); + SCB_EnableDCache(); + HAL_PWREx_EnableVddA(); HAL_PWREx_EnableVddIO2(); HAL_PWREx_EnableVddIO3(); @@ -126,8 +132,6 @@ void board_init(void) { __HAL_RCC_GPIOP_CLK_ENABLE(); __HAL_RCC_GPIOQ_CLK_ENABLE(); - // HAL_ICACHE_Enable(); - for (uint8_t i = 0; i < TU_ARRAY_SIZE(board_pindef); i++) { HAL_GPIO_Init(board_pindef[i].port, &board_pindef[i].pin_init); } @@ -155,7 +159,7 @@ void board_init(void) { HAL_UART_Init(&UartHandle); #endif - +#if (CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0) || (CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 0) __HAL_RCC_USB1_OTG_HS_CLK_ENABLE(); __HAL_RCC_PWR_CLK_ENABLE(); HAL_PWREx_EnableVddUSBVMEN(); @@ -196,11 +200,109 @@ void board_init(void) { /* Peripheral PHY clock enable */ __HAL_RCC_USB1_OTG_HS_PHY_CLK_ENABLE(); - board_init2(); +#if CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 0 + board_vbus_set(BOARD_TUH_RHPORT, 1); +#endif +#endif + +#if (CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1) || (CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 1) + __HAL_RCC_USB2_OTG_HS_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + HAL_PWREx_EnableVddUSBVMEN(); + while(__HAL_PWR_GET_FLAG(PWR_FLAG_USB33RDY)); + HAL_PWREx_EnableVddUSB(); + + LL_AHB5_GRP1_ForceReset(0x00800000); + __HAL_RCC_USB2_OTG_HS_FORCE_RESET(); + __HAL_RCC_USB2_OTG_HS_PHY_FORCE_RESET(); + + LL_RCC_HSE_SelectHSEDiv2AsDiv2Clock(); + LL_AHB5_GRP1_ReleaseReset(0x00800000); + + /* Peripheral clock enable */ + __HAL_RCC_USB2_OTG_HS_CLK_ENABLE(); + + /* Required few clock cycles before accessing USB PHY Controller Registers */ + for (volatile uint32_t i = 0; i < 10; i++) { + __NOP(); // No Operation instruction to create a delay + } + + USB2_HS_PHYC->USBPHYC_CR &= ~(0x7 << 0x4); + + USB2_HS_PHYC->USBPHYC_CR |= (0x1 << 16) | + (0x2 << 4) | + (0x1 << 2) | + 0x1U; + + __HAL_RCC_USB2_OTG_HS_PHY_RELEASE_RESET(); + + /* Required few clock cycles before Releasing Reset */ + for (volatile uint32_t i = 0; i < 10; i++) { + __NOP(); // No Operation instruction to create a delay + } + + __HAL_RCC_USB2_OTG_HS_RELEASE_RESET(); + + /* Peripheral PHY clock enable */ + __HAL_RCC_USB2_OTG_HS_PHY_CLK_ENABLE(); -#if CFG_TUH_ENABLED +#if CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 1 board_vbus_set(BOARD_TUH_RHPORT, 1); #endif +#endif + + board_init2(); +} + +static void MPU_Config(void) +{ + MPU_Region_InitTypeDef default_config = {0}; + MPU_Attributes_InitTypeDef attr_config = {0}; + uint32_t primask_bit = __get_PRIMASK(); + __disable_irq(); + + /* disable the MPU */ + HAL_MPU_Disable(); + + /* create an attribute configuration for the MPU */ + attr_config.Attributes = INNER_OUTER(MPU_NOT_CACHEABLE); + attr_config.Number = MPU_ATTRIBUTES_NUMBER0; + + HAL_MPU_ConfigMemoryAttributes(&attr_config); + + /* Create a non cacheable region */ + /*Normal memory type, code execution allowed */ + default_config.Enable = MPU_REGION_ENABLE; + default_config.Number = MPU_REGION_NUMBER0; + default_config.BaseAddress = __NON_CACHEABLE_SECTION_BEGIN; + default_config.LimitAddress = __NON_CACHEABLE_SECTION_END; + default_config.DisableExec = MPU_INSTRUCTION_ACCESS_ENABLE; + default_config.AccessPermission = MPU_REGION_ALL_RW; + default_config.IsShareable = MPU_ACCESS_NOT_SHAREABLE; + default_config.AttributesIndex = MPU_ATTRIBUTES_NUMBER0; + HAL_MPU_ConfigRegion(&default_config); + + /* enable the MPU */ + HAL_MPU_Enable(MPU_PRIVILEGED_DEFAULT); + + /* Exit critical section to lock the system and avoid any issue around MPU mechanisme */ + __set_PRIMASK(primask_bit); +} + +static void SystemIsolation_Config(void) { + /* set all required IPs as secure privileged */ + __HAL_RCC_RIFSC_CLK_ENABLE(); + RIMC_MasterConfig_t RIMC_master = {0}; + RIMC_master.MasterCID = RIF_CID_1; + RIMC_master.SecPriv = RIF_ATTRIBUTE_SEC | RIF_ATTRIBUTE_PRIV; + + /*RIMC configuration*/ + HAL_RIF_RIMC_ConfigMasterAttributes(RIF_MASTER_INDEX_OTG1, &RIMC_master); + HAL_RIF_RIMC_ConfigMasterAttributes(RIF_MASTER_INDEX_OTG2, &RIMC_master); + + /*RISUP configuration*/ + HAL_RIF_RISC_SetSlaveSecureAttributes(RIF_RISC_PERIPH_INDEX_OTG1HS , RIF_ATTRIBUTE_SEC | RIF_ATTRIBUTE_PRIV); + HAL_RIF_RISC_SetSlaveSecureAttributes(RIF_RISC_PERIPH_INDEX_OTG2HS , RIF_ATTRIBUTE_SEC | RIF_ATTRIBUTE_PRIV); } //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32n6/family.cmake b/hw/bsp/stm32n6/family.cmake index 6c7aaea61..972138018 100644 --- a/hw/bsp/stm32n6/family.cmake +++ b/hw/bsp/stm32n6/family.cmake @@ -21,7 +21,7 @@ set(FAMILY_MCUS STM32N6 CACHE INTERNAL "") # Port & Speed Selection # ---------------------- if (NOT DEFINED RHPORT_DEVICE) - set(RHPORT_DEVICE 1) + set(RHPORT_DEVICE 0) endif () if (NOT DEFINED RHPORT_HOST) set(RHPORT_HOST 1) @@ -68,6 +68,7 @@ function(family_add_board BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rif.c ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -80,8 +81,8 @@ function(family_add_board BOARD_TARGET) BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} BOARD_TUH_RHPORT=${RHPORT_HOST} BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} - SEGGER_RTT_SECTION="noncacheable_buffer" - BUFFER_SIZE_UP=0x3000 + SEGGER_RTT_SECTION=".noncacheable" + BUFFER_SIZE_UP=0x4000 ) update_board(${BOARD_TARGET}) diff --git a/hw/bsp/stm32n6/family.mk b/hw/bsp/stm32n6/family.mk index 45554e251..9fef533b1 100644 --- a/hw/bsp/stm32n6/family.mk +++ b/hw/bsp/stm32n6/family.mk @@ -12,7 +12,7 @@ CPU_CORE ?= cortex-m55 # ---------------------- # Port & Speed Selection # ---------------------- -RHPORT_DEVICE ?= 1 +RHPORT_DEVICE ?= 0 RHPORT_HOST ?= 1 ifndef RHPORT_DEVICE_SPEED @@ -32,8 +32,8 @@ CFLAGS += \ -DBOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} \ -DBOARD_TUH_RHPORT=${RHPORT_HOST} \ -DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} \ - -DSEGGER_RTT_SECTION=\"noncacheable_buffer\" \ - -DBUFFER_SIZE_UP=0x3000 \ + -DSEGGER_RTT_SECTION="\".noncacheable\"" \ + -DBUFFER_SIZE_UP=0x4000 \ # GCC Flags CFLAGS_GCC += \ diff --git a/hw/bsp/stm32n6/setup_iar.mac b/hw/bsp/stm32n6/setup_iar.mac new file mode 100644 index 000000000..b6f2bc97a --- /dev/null +++ b/hw/bsp/stm32n6/setup_iar.mac @@ -0,0 +1,12 @@ +/* Called once after the target reset. */ +execUserReset() +{ + /* Re-load image as AIXRAM2 is erased after CPU reset */ + __loadImage("$EXE_DIR$\\$TARGET_BNAME$.hex", 0, 0); + + __restoreSoftwareBreakpoints(); + + #PC = __readMemory32(0x34180404, "Memory"); + + #SP = 0x341FFD00; +} diff --git a/hw/bsp/stm32n6/stm32n6.jdebug b/hw/bsp/stm32n6/stm32n6.jdebug new file mode 100644 index 000000000..81490db5d --- /dev/null +++ b/hw/bsp/stm32n6/stm32n6.jdebug @@ -0,0 +1,362 @@ +/********************************************************************* +* (c) SEGGER Microcontroller GmbH * +* The Embedded Experts * +* www.segger.com * +********************************************************************** + +File : +Created : 31. Jan 2026 16:34 +Ozone Version : V3.40e +*/ + +/********************************************************************* +* +* OnProjectLoad +* +* Function description +* Project load routine. Required. +* +********************************************************************** +*/ +void OnProjectLoad (void) { + // + // Dialog-generated settings + // + Project.SetDevice ("STM32N657X0"); + Project.SetHostIF ("USB", ""); + Project.SetTargetIF ("SWD"); + Project.SetTIFSpeed ("4 MHz"); + Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M55F.svd"); + // + // User settings + // + File.Open ("$(ProjectDir)/../../../examples/device/cdc_msc/build/stm32n6570dk/RelWithDebInfo/cdc_msc.elf"); +} + +/********************************************************************* +* +* OnStartupComplete +* +* Function description +* Called when program execution has reached/passed +* the startup completion point. Optional. +* +********************************************************************** +*/ +//void OnStartupComplete (void) { +//} + +/********************************************************************* +* +* TargetReset +* +* Function description +* Replaces the default target device reset routine. Optional. +* +* Notes +* This example demonstrates the usage when +* debugging an application in RAM on a Cortex-M target device. +* +********************************************************************** +*/ +//void TargetReset (void) { +// +// unsigned int SP; +// unsigned int PC; +// unsigned int VectorTableAddr; +// +// VectorTableAddr = Elf.GetBaseAddr(); +// // +// // Set up initial stack pointer +// // +// if (VectorTableAddr != 0xFFFFFFFF) { +// SP = Target.ReadU32(VectorTableAddr); +// Target.SetReg("SP", SP); +// } +// // +// // Set up entry point PC +// // +// PC = Elf.GetEntryPointPC(); +// +// if (PC != 0xFFFFFFFF) { +// Target.SetReg("PC", PC); +// } else if (VectorTableAddr != 0xFFFFFFFF) { +// PC = Target.ReadU32(VectorTableAddr + 4); +// Target.SetReg("PC", PC); +// } else { +// Util.Error("Project file error: failed to set entry point PC", 1); +// } +//} + +/********************************************************************* +* +* BeforeTargetReset +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetReset (void) { +//} + +/********************************************************************* +* +* AfterTargetReset +* +* Function description +* Event handler routine. Optional. +* The default implementation initializes SP and PC to reset values. +** +********************************************************************** +*/ +void AfterTargetReset (void) { + _SetupTarget(); +} + +/********************************************************************* +* +* DebugStart +* +* Function description +* Replaces the default debug session startup routine. Optional. +* +********************************************************************** +*/ +//void DebugStart (void) { +//} + +/********************************************************************* +* +* TargetConnect +* +* Function description +* Replaces the default target IF connection routine. Optional. +* +********************************************************************** +*/ +//void TargetConnect (void) { +//} + +/********************************************************************* +* +* BeforeTargetConnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetConnect (void) { +//} + +/********************************************************************* +* +* AfterTargetConnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetConnect (void) { +//} + +/********************************************************************* +* +* TargetDownload +* +* Function description +* Replaces the default program download routine. Optional. +* +********************************************************************** +*/ +//void TargetDownload (void) { +//} + +/********************************************************************* +* +* BeforeTargetDownload +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetDownload (void) { +//} + +/********************************************************************* +* +* AfterTargetDownload +* +* Function description +* Event handler routine. Optional. +* The default implementation initializes SP and PC to reset values. +* +********************************************************************** +*/ +void AfterTargetDownload (void) { + //_SetupTarget(); +} + +/********************************************************************* +* +* BeforeTargetDisconnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetDisconnect (void) { +//} + +/********************************************************************* +* +* AfterTargetDisconnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetDisconnect (void) { +//} + +/********************************************************************* +* +* AfterTargetHalt +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetHalt (void) { +//} + +/********************************************************************* +* +* BeforeTargetResume +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetResume (void) { +//} + +/********************************************************************* +* +* OnSnapshotLoad +* +* Function description +* Called upon loading a snapshot. Optional. +* +* Additional information +* This function is used to restore the target state in cases +* where values cannot simply be written to the target. +* Typical use: GPIO clock needs to be enabled, before +* GPIO is configured. +* +********************************************************************** +*/ +//void OnSnapshotLoad (void) { +//} + +/********************************************************************* +* +* OnSnapshotSave +* +* Function description +* Called upon saving a snapshot. Optional. +* +* Additional information +* This function is usually used to save values of the target +* state which can either not be trivially read, +* or need to be restored in a specific way or order. +* Typically use: Memory Mapped Registers, +* such as PLL and GPIO configuration. +* +********************************************************************** +*/ +//void OnSnapshotSave (void) { +//} + +/********************************************************************* +* +* OnError +* +* Function description +* Called when an error occurred. Optional. +* +********************************************************************** +*/ +//void OnError (void) { +//} + +/********************************************************************* +* +* AfterProjectLoad +* +* Function description +* After Project load routine. Optional. +* +********************************************************************** +*/ +//void AfterProjectLoad (void) { +//} + +/********************************************************************* +* +* OnDebugStartBreakSymbolReached +* +* Function description +* Called when program execution has reached/passed +* the symbol to be breaked at during debug start. Optional. +* +********************************************************************** +*/ +//void OnDebugStartBreakSymReached (void) { +//} + +/********************************************************************* +* +* _SetupTarget +* +* Function description +* Setup the target. +* Called by AfterTargetReset() and AfterTargetDownload(). +* +* Auto-generated function. May be overridden by Ozone. +* +********************************************************************** +*/ +void _SetupTarget(void) { + unsigned int SP; + unsigned int PC; + unsigned int VectorTableAddr; + + Debug.Download(); + Debug.Halt(); + + VectorTableAddr = Elf.GetBaseAddr(); + // + // Set up initial stack pointer + // + SP = Target.ReadU32(VectorTableAddr); + if (SP != 0xFFFFFFFF) { + Target.SetReg("SP", SP); + } + // + // Set up entry point PC + // + PC = Elf.GetEntryPointPC(); + if (PC != 0xFFFFFFFF) { + Target.SetReg("PC", PC); + } else { + Util.Error("Project script error: failed to set up entry point PC", 1); + } +} diff --git a/hw/bsp/stm32n6/stm32n6xx_hal_conf.h b/hw/bsp/stm32n6/stm32n6xx_hal_conf.h index 00cb31159..49ca767fe 100644 --- a/hw/bsp/stm32n6/stm32n6xx_hal_conf.h +++ b/hw/bsp/stm32n6/stm32n6xx_hal_conf.h @@ -67,7 +67,7 @@ /*#define HAL_PKA_MODULE_ENABLED */ /*#define HAL_PSSI_MODULE_ENABLED */ /*#define HAL_RAMCFG_MODULE_ENABLED */ -/*#define HAL_RIF_MODULE_ENABLED */ +#define HAL_RIF_MODULE_ENABLED /*#define HAL_RNG_MODULE_ENABLED */ /*#define HAL_RTC_MODULE_ENABLED */ /*#define HAL_SAI_MODULE_ENABLED */ diff --git a/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h b/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h index cf3f63ea5..c99743738 100644 --- a/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h +++ b/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h @@ -55,6 +55,8 @@ extern "C" #define UART_TX_PIN GPIO_PIN_9 #define UART_RX_PIN GPIO_PIN_10 +#define VBUS_SENSE_EN 0 + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -110,6 +112,9 @@ static void SystemClock_Config(void) { static void SystemPower_Config(void) { } +static inline void board_vbus_sense_init(void) { +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h index 0c3439b2c..eb2b63721 100644 --- a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h @@ -110,6 +110,9 @@ static void SystemClock_Config(void) { static void SystemPower_Config(void) { } +static inline void board_vbus_sense_init(void) { +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32u5/boards/stm32u575eval/board.h b/hw/bsp/stm32u5/boards/stm32u575eval/board.h index b11f6a747..cce3e38b3 100644 --- a/hw/bsp/stm32u5/boards/stm32u575eval/board.h +++ b/hw/bsp/stm32u5/boards/stm32u575eval/board.h @@ -56,6 +56,8 @@ extern "C" #define UART_TX_PIN GPIO_PIN_9 #define UART_RX_PIN GPIO_PIN_10 +#define VBUS_SENSE_EN 0 + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -111,6 +113,9 @@ static void SystemClock_Config(void) { static void SystemPower_Config(void) { } +static inline void board_vbus_sense_init(void) { +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h index be037b68a..b6b60f021 100644 --- a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h @@ -37,6 +37,8 @@ extern "C" { #endif +#include "stm32u5xx_ll_tim.h" + // LED GREEN #define LED_PORT GPIOC #define LED_PIN GPIO_PIN_7 @@ -55,6 +57,8 @@ extern "C" #define UART_TX_PIN GPIO_PIN_7 #define UART_RX_PIN GPIO_PIN_8 +#define VBUS_SENSE_EN 0 + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -110,6 +114,104 @@ static void SystemClock_Config(void) { static void SystemPower_Config(void) { } +static inline void board_vbus_sense_init(void) { + /* ADC config */ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADCDAC; + PeriphClkInit.AdcDacClockSelection = RCC_ADCDACCLKSOURCE_HSE; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + Error_Handler(); + } + __HAL_RCC_ADC12_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + GPIO_InitStruct.Pin = GPIO_PIN_2; + GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + ADC_HandleTypeDef hadc1; + hadc1.Instance = ADC1; + hadc1.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1; + hadc1.Init.Resolution = ADC_RESOLUTION_14B; + hadc1.Init.GainCompensation = 0; + hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT; + hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE; + hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV; + hadc1.Init.LowPowerAutoWait = DISABLE; + hadc1.Init.ContinuousConvMode = DISABLE; + hadc1.Init.NbrOfConversion = 1; + hadc1.Init.DiscontinuousConvMode = DISABLE; + hadc1.Init.ExternalTrigConv = ADC_EXTERNALTRIG_T1_TRGO; + hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING; + hadc1.Init.DMAContinuousRequests = DISABLE; + hadc1.Init.TriggerFrequencyMode = ADC_TRIGGER_FREQ_HIGH; + hadc1.Init.Overrun = ADC_OVR_DATA_OVERWRITTEN; + hadc1.Init.LeftBitShift = ADC_LEFTBITSHIFT_NONE; + hadc1.Init.ConversionDataManagement = ADC_CONVERSIONDATA_DR; + hadc1.Init.OversamplingMode = DISABLE; + if (HAL_ADC_Init(&hadc1) != HAL_OK) { + Error_Handler(); + } + + ADC_ChannelConfTypeDef sConfig = {0}; + sConfig.Channel = ADC_CHANNEL_3; + sConfig.Rank = ADC_REGULAR_RANK_1; + sConfig.SamplingTime = ADC_SAMPLETIME_68CYCLES; + sConfig.SingleDiff = ADC_SINGLE_ENDED; + sConfig.OffsetNumber = ADC_OFFSET_NONE; + sConfig.Offset = 0; + if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK) { + Error_Handler(); + } + HAL_NVIC_EnableIRQ(ADC1_IRQn); + + /* TIM1 init for TRGO */ + __HAL_RCC_TIM1_CLK_ENABLE(); + TIM_HandleTypeDef htim1; + TIM_ClockConfigTypeDef sClockSourceConfig = {0}; + htim1.Instance = TIM1; + htim1.Init.Prescaler = 159; + htim1.Init.CounterMode = TIM_COUNTERMODE_UP; + htim1.Init.Period = 999; + htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1; + htim1.Init.RepetitionCounter = 0; + htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE; + if (HAL_TIM_Base_Init(&htim1) != HAL_OK) { + Error_Handler(); + } + sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL; + if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK) { + Error_Handler(); + } + LL_TIM_SetTriggerOutput(htim1.Instance, LL_TIM_TRGO_UPDATE); + + HAL_ADCEx_Calibration_Start(&hadc1, ADC_CALIB_OFFSET, ADC_SINGLE_ENDED); + HAL_ADC_Start_IT(&hadc1); + HAL_TIM_Base_Start(&htim1); +} + +void ADC1_IRQHandler(void) { + if(LL_ADC_IsActiveFlag_EOC(ADC1) != 0) { + /* Clear flag ADC group regular end of unitary conversion */ + LL_ADC_ClearFlag_EOC(ADC1); + /* ADC code = 4.5V * R2 / (R1 + R2) * (2^14) / 3.3V + * with R1 = 330kOhm and R2 = 50kOhm + */ + const uint32_t threshold = 4500 * 50 / (50 + 330) * 16384 / 3300; + if((ADC1->DR > threshold) && (USB_OTG_FS->GOTGCTL & USB_OTG_GOTGCTL_BVALOEN)) { + USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; + } else { + USB_OTG_FS->GOTGCTL &= ~USB_OTG_GOTGCTL_BVALOVAL; + } + } + if(LL_ADC_IsActiveFlag_OVR(ADC1) != 0) { + /* Clear flag ADC group regular overrun */ + LL_ADC_ClearFlag_OVR(ADC1); + } +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h index 0785fb36b..15106aee6 100644 --- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h @@ -37,6 +37,8 @@ extern "C" { #endif +#include "stm32u5xx_ll_tim.h" + // LED GREEN #define LED_PORT GPIOC #define LED_PIN GPIO_PIN_7 @@ -55,11 +57,13 @@ extern "C" #define UART_TX_PIN GPIO_PIN_9 #define UART_RX_PIN GPIO_PIN_10 +#define VBUS_SENSE_EN 0 + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ -static void SystemClock_Config(void) { +static inline void SystemClock_Config(void) { RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; @@ -128,7 +132,7 @@ static void SystemClock_Config(void) { } } -static void SystemPower_Config(void) { +static inline void SystemPower_Config(void) { HAL_PWREx_EnableVddIO2(); /* @@ -141,7 +145,105 @@ static void SystemPower_Config(void) { /* USER CODE END PWR */ } +static inline void board_vbus_sense_init(void) { + /* ADC config */ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADCDAC; + PeriphClkInit.AdcDacClockSelection = RCC_ADCDACCLKSOURCE_HSE; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + Error_Handler(); + } + __HAL_RCC_ADC12_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + GPIO_InitStruct.Pin = GPIO_PIN_2; + GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + ADC_HandleTypeDef hadc1; + hadc1.Instance = ADC1; + hadc1.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1; + hadc1.Init.Resolution = ADC_RESOLUTION_14B; + hadc1.Init.GainCompensation = 0; + hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT; + hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE; + hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV; + hadc1.Init.LowPowerAutoWait = DISABLE; + hadc1.Init.ContinuousConvMode = DISABLE; + hadc1.Init.NbrOfConversion = 1; + hadc1.Init.DiscontinuousConvMode = DISABLE; + hadc1.Init.ExternalTrigConv = ADC_EXTERNALTRIG_T1_TRGO; + hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING; + hadc1.Init.DMAContinuousRequests = DISABLE; + hadc1.Init.TriggerFrequencyMode = ADC_TRIGGER_FREQ_HIGH; + hadc1.Init.Overrun = ADC_OVR_DATA_OVERWRITTEN; + hadc1.Init.LeftBitShift = ADC_LEFTBITSHIFT_NONE; + hadc1.Init.ConversionDataManagement = ADC_CONVERSIONDATA_DR; + hadc1.Init.OversamplingMode = DISABLE; + if (HAL_ADC_Init(&hadc1) != HAL_OK) { + Error_Handler(); + } + + ADC_ChannelConfTypeDef sConfig = {0}; + sConfig.Channel = ADC_CHANNEL_3; + sConfig.Rank = ADC_REGULAR_RANK_1; + sConfig.SamplingTime = ADC_SAMPLETIME_68CYCLES; + sConfig.SingleDiff = ADC_SINGLE_ENDED; + sConfig.OffsetNumber = ADC_OFFSET_NONE; + sConfig.Offset = 0; + if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK) { + Error_Handler(); + } + HAL_NVIC_EnableIRQ(ADC1_2_IRQn); + + /* TIM1 init for TRGO */ + __HAL_RCC_TIM1_CLK_ENABLE(); + TIM_HandleTypeDef htim1; + TIM_ClockConfigTypeDef sClockSourceConfig = {0}; + htim1.Instance = TIM1; + htim1.Init.Prescaler = 159; + htim1.Init.CounterMode = TIM_COUNTERMODE_UP; + htim1.Init.Period = 999; + htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1; + htim1.Init.RepetitionCounter = 0; + htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE; + if (HAL_TIM_Base_Init(&htim1) != HAL_OK) { + Error_Handler(); + } + sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL; + if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK) { + Error_Handler(); + } + LL_TIM_SetTriggerOutput(htim1.Instance, LL_TIM_TRGO_UPDATE); + + HAL_ADCEx_Calibration_Start(&hadc1, ADC_CALIB_OFFSET, ADC_SINGLE_ENDED); + HAL_ADC_Start_IT(&hadc1); + HAL_TIM_Base_Start(&htim1); +} +void ADC1_2_IRQHandler(void) { + if(LL_ADC_IsActiveFlag_EOC(ADC1) != 0) { + /* Clear flag ADC group regular end of unitary conversion */ + LL_ADC_ClearFlag_EOC(ADC1); + /* ADC code = 4.5V * R2 / (R1 + R2) * (2^14) / 3.3V + * with R1 = 330kOhm and R2 = 50kOhm + */ + const uint32_t threshold = 4500 * 50 / (50 + 330) * 16384 / 3300; + if((ADC1->DR > threshold) && (USB_OTG_HS->GOTGCTL & USB_OTG_GOTGCTL_BVALOEN)) { + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; + USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALOVAL; + } else { + USB_OTG_HS->GOTGCTL &= ~USB_OTG_GOTGCTL_BVALOVAL; + USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBVALOVAL; + } + } + if(LL_ADC_IsActiveFlag_OVR(ADC1) != 0) { + /* Clear flag ADC group regular overrun */ + LL_ADC_ClearFlag_OVR(ADC1); + } +} #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index 26d72d6a0..dfcf5c537 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -179,18 +179,14 @@ void board_init(void) { GPIO_InitStruct.Mode = GPIO_MODE_INPUT; GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; - #else - // Disable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; #endif // vbus sense +#if CFG_TUD_ENABLED + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = VBUS_SENSE_EN; + tud_configure(0, TUD_CFGID_DWC2, &cfg); +#endif + /* Enable USB power on Pwrctrl CR2 register */ HAL_PWREx_EnableVddUSB(); @@ -218,13 +214,15 @@ void board_init(void) { /*Configuring the SYSCFG registers OTG_HS PHY*/ HAL_SYSCFG_EnableOTGPHY(SYSCFG_OTG_HS_PHY_ENABLE); - // Disable VBUS sense (B device) - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALEXTOEN; - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALOVAL; +#if CFG_TUD_ENABLED + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = VBUS_SENSE_EN; + tud_configure(0, TUD_CFGID_DWC2, &cfg); +#endif #endif // USB_OTG_FS + + /* Non-standard VBus sense settings */ + board_vbus_sense_init(); } //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index 58dc63ae3..3d23c554d 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -45,6 +45,9 @@ function(family_add_board BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_adc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_adc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_tim.c ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -96,7 +99,7 @@ function(family_configure_example TARGET RTOS) endif () if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes -Wno-self-assign") endif () set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk index 47aed10a9..3dab8c610 100644 --- a/hw/bsp/stm32u5/family.mk +++ b/hw/bsp/stm32u5/family.mk @@ -16,6 +16,7 @@ CFLAGS_GCC += \ -Wno-error=undef \ -Wno-error=unused-parameter \ -Wno-error=type-limits \ + -Wno-self-assign \ ifeq ($(TOOLCHAIN),gcc) CFLAGS_GCC += -Wno-error=maybe-uninitialized @@ -35,11 +36,15 @@ SRC_C += \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_adc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_adc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_tim.c ifneq ($(filter stm32u545xx stm32u535xx,$(MCU_VARIANT)),) SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c \ src/portable/st/stm32_fsdev/fsdev_common.c else SRC_C += \ diff --git a/hw/bsp/stm32u5/stm32u5xx_hal_conf.h b/hw/bsp/stm32u5/stm32u5xx_hal_conf.h index 87c3683de..5d95862f6 100644 --- a/hw/bsp/stm32u5/stm32u5xx_hal_conf.h +++ b/hw/bsp/stm32u5/stm32u5xx_hal_conf.h @@ -36,7 +36,7 @@ #define HAL_MODULE_ENABLED -/*#define HAL_ADC_MODULE_ENABLED */ +#define HAL_ADC_MODULE_ENABLED /*#define HAL_MDF_MODULE_ENABLED */ /*#define HAL_COMP_MODULE_ENABLED */ /*#define HAL_CORDIC_MODULE_ENABLED */ @@ -76,7 +76,7 @@ /*#define HAL_SMBUS_MODULE_ENABLED */ /*#define HAL_SPI_MODULE_ENABLED */ /*#define HAL_SRAM_MODULE_ENABLED */ -/*#define HAL_TIM_MODULE_ENABLED */ +#define HAL_TIM_MODULE_ENABLED /*#define HAL_TSC_MODULE_ENABLED */ /*#define HAL_RAMCFG_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED diff --git a/hw/bsp/stm32wba/family.c b/hw/bsp/stm32wba/family.c index 8dc6547ae..d05415755 100644 --- a/hw/bsp/stm32wba/family.c +++ b/hw/bsp/stm32wba/family.c @@ -172,14 +172,7 @@ void board_init(void) { // Configuring the SYSCFG registers OTG_HS PHY SYSCFG->OTGHSPHYCR |= SYSCFG_OTGHSPHYCR_EN; - - // Disable VBUS sense (B device) - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALEXTOEN; - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALOVAL; - #endif // USB_OTG_FS + #endif // USB_OTG_HS } void board_led_write(bool state) { HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); } diff --git a/hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h index 454b085e9..b4423e269 100644 --- a/hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h @@ -44,7 +44,13 @@ // skip if included from IAR assembler #ifndef __IASMARM__ - #include "TM4C123.h" + #ifdef TM4C123GH6PM + #include "TM4C123.h" + #elif TM4C1294NCPDT + #include "TM4C129.h" + #else + #error "Unknown TM4C device" + #endif #endif /* Cortex M23/M33 port configuration. */ diff --git a/hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h b/hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h index c0ceb4cd8..fc0ab4c60 100644 --- a/hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h +++ b/hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h @@ -36,20 +36,26 @@ extern "C" { #endif +#include "TM4C123.h" + #define BOARD_UART UART0 #define BOARD_UART_PORT GPIOA +#define BTN_PORT_CLK 5 #define BOARD_BTN_PORT GPIOF #define BOARD_BTN 4 #define BOARD_BTN_Msk (1u<<4) #define BUTTON_STATE_ACTIVE 0 +#define LED_PORT_CLK 5 #define LED_PORT GPIOF #define LED_PIN_RED 1 #define LED_PIN_BLUE 2 #define LED_PIN_GREEN 3 #define LED_STATE_ON 1 +#define BOARD_LED_PIN LED_PIN_BLUE + #ifdef __cplusplus } #endif diff --git a/hw/bsp/tm4c/boards/ek_tm4c123gxl/tm4c123.ld b/hw/bsp/tm4c/boards/ek_tm4c123gxl/tm4c123.ld index 11e9608cc..3f06d8f03 100644 --- a/hw/bsp/tm4c/boards/ek_tm4c123gxl/tm4c123.ld +++ b/hw/bsp/tm4c/boards/ek_tm4c123gxl/tm4c123.ld @@ -17,7 +17,7 @@ SECTIONS .text : { . = ALIGN(4) ; - *(.vectors) + KEEP(*(.vectors)) *(.text) *(.text.*) *(.init) diff --git a/hw/bsp/tm4c/boards/ek_tm4c1294xl/TM4C1294NC.icf b/hw/bsp/tm4c/boards/ek_tm4c1294xl/TM4C1294NC.icf new file mode 100644 index 000000000..2dba41866 --- /dev/null +++ b/hw/bsp/tm4c/boards/ek_tm4c1294xl/TM4C1294NC.icf @@ -0,0 +1,28 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x00000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x00000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x000FFFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2003FFFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x8000; +define symbol __ICFEDIT_size_heap__ = 0x10000; +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; diff --git a/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.cmake b/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.cmake new file mode 100644 index 000000000..3e03b3f72 --- /dev/null +++ b/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.cmake @@ -0,0 +1,13 @@ +set(MCU_SUB_VARIANT 129) + +set(JLINK_DEVICE TM4C1294NCPDT) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/tm4c1294nc.ld) +set(LD_FILE_IAR ${CMAKE_CURRENT_LIST_DIR}/TM4C1294NC.icf) + +set(OPENOCD_OPTION "-f board/ti_ek-tm4c1294xl.cfg") + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + TM4C1294NCPDT + ) +endfunction() diff --git a/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.h b/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.h new file mode 100644 index 000000000..4530e9430 --- /dev/null +++ b/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.h @@ -0,0 +1,75 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: TM4C1294 LaunchPad + url: https://www.ti.com/tool/EK-TM4C1294XL +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#include "TM4C129.h" + +#define BOARD_UART UART0 +#define BOARD_UART_PORT GPIOA + +#define BTN_PORT_CLK 8 +#define BOARD_BTN_PORT GPIOJ +#define BOARD_BTN 0 +#define BOARD_BTN_Msk (1u<<0) +#define BUTTON_STATE_ACTIVE 0 + +#define LED_PORT_CLK 12 +#define LED_PORT GPION +#define LED_PIN_1 1 +#define LED_PIN_2 0 +#define LED_STATE_ON 1 + +#define BOARD_LED_PIN LED_PIN_2 + +#define GPIOA GPIOA_AHB +#define GPIOB GPIOB_AHB +#define GPIOC GPIOC_AHB +#define GPIOD GPIOD_AHB +#define GPIOE GPIOE_AHB +#define GPIOF GPIOF_AHB +#define GPIOG GPIOG_AHB +#define GPIOH GPIOH_AHB +#define GPIOI GPIOI_AHB +#define GPIOJ GPIOJ_AHB + +#define GPIOA_Type GPIOA_AHB_Type + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.mk b/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.mk new file mode 100644 index 000000000..b01977674 --- /dev/null +++ b/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.mk @@ -0,0 +1,16 @@ +MCU_SUB_VARIANT = 129 + +CFLAGS += -DTM4C1294NCPDT + +LD_FILE_GCC = $(BOARD_PATH)/tm4c1294nc.ld +LD_FILE_IAR = $(BOARD_PATH)/TM4C1294NC.icf + +# For flash-jlink target +JLINK_DEVICE = TM4C1294NCPDT + +# flash using openocd +OPENOCD_OPTION = -f board/ti_ek-tm4c1294xl.cfg + +UNIFLASH_OPTION = -c ${TOP}/${BOARD_PATH}/${BOARD}.ccxml -r 1 + +flash: flash-openocd diff --git a/hw/bsp/tm4c/boards/ek_tm4c1294xl/tm4c1294nc.ld b/hw/bsp/tm4c/boards/ek_tm4c1294xl/tm4c1294nc.ld new file mode 100644 index 000000000..fa4ea4dc5 --- /dev/null +++ b/hw/bsp/tm4c/boards/ek_tm4c1294xl/tm4c1294nc.ld @@ -0,0 +1,66 @@ +ENTRY(Reset_Handler) + +_estack = 0x20008000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0; /* required amount of heap */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ + + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00100000 + SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 +} + +SECTIONS +{ + .text : + { + . = ALIGN(4) ; + _text = . ; + KEEP(*(.isr_vector)) + *(.text) + *(.text.*) + *(.init) + *(.fini) + *(.rodata) + *(.rodata.*) + *(.ARM.exidx*) + _etext = . ; + . = ALIGN(4) ; + } >FLASH + + .data : AT(ADDR(.text) + SIZEOF(.text)) + { + _data = .; + . = ALIGN(4); + _ldata = LOADADDR (.data); + *(.data) + *(.data.*) + _edata = .; + . = ALIGN(4); + + } >SRAM + + .bss : + { + . = ALIGN(4) ; + _bss = .; + *(.bss) + *(.bss.*) + *(.COMMON) + _ebss = .; + . = ALIGN(4); + }>SRAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >SRAM +} diff --git a/hw/bsp/tm4c/family.c b/hw/bsp/tm4c/family.c index ee1fa2a3c..ae7f22f00 100644 --- a/hw/bsp/tm4c/family.c +++ b/hw/bsp/tm4c/family.c @@ -2,7 +2,6 @@ manufacturer: Texas Instruments */ -#include "TM4C123.h" #include "bsp/board_api.h" #include "board.h" @@ -27,6 +26,9 @@ static void board_uart_init(void) { SYSCTL->RCGCUART |= (1 << 0); // Enable the clock to UART0 SYSCTL->RCGCGPIO |= (1 << 0); // Enable the clock to GPIOA + while (!(SYSCTL->PRGPIO & (1 << 0))) {} // Wait for the GPIOA clock to stabilize + while (!(SYSCTL->PRUART & (1 << 0))) {} // Wait for the UART0 clock to stabilize + GPIOA->AFSEL |= (1 << 1) | (1 << 0); // Enable the alternate function on pin PA0 & PA1 GPIOA->PCTL |= (1 << 0) | (1 << 4); // Configure the GPIOPCTL register to select UART0 in PA0 and PA1 GPIOA->DEN |= (1 << 0) | (1 << 1); // Enable the digital functionality in PA0 and PA1 @@ -44,12 +46,26 @@ static void board_uart_init(void) { UART0->CTL = (1 << 0) | (1 << 8) | (1 << 9); // UART0 Enable, Transmit Enable, Receive Enable } -static void initialize_board_led(GPIOA_Type* port, uint8_t PinMsk, uint8_t dirmsk) { - /* Enable PortF Clock */ - SYSCTL->RCGCGPIO |= (1 << 5); +static void board_button_init(GPIOA_Type* port, uint8_t PinMsk) { + /* Enable Port Clock */ + SYSCTL->RCGCGPIO |= (1 << BTN_PORT_CLK); + + /* Let the clock stabilize */ + while (!((SYSCTL->PRGPIO) & (1 << BTN_PORT_CLK))) {} + + /* Port Digital Enable */ + port->DEN |= PinMsk; + + /* Set direction */ + port->DIR &= ~PinMsk; +} + +static void board_led_init(GPIOA_Type* port, uint8_t PinMsk, uint8_t dirmsk) { + /* Enable Port Clock */ + SYSCTL->RCGCGPIO |= (1 << LED_PORT_CLK); /* Let the clock stabilize */ - while (!((SYSCTL->PRGPIO) & (1 << 5))) {} + while (!((SYSCTL->PRGPIO) & (1 << LED_PORT_CLK))) {} /* Port Digital Enable */ port->DEN |= PinMsk; @@ -71,7 +87,9 @@ static uint32_t ReadGPIOPin(GPIOA_Type* port, uint8_t pinMsk) { } void board_init(void) { +#ifdef TM4C123_H SystemCoreClockUpdate(); +#endif #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer @@ -83,6 +101,7 @@ void board_init(void) { NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); #endif +#ifdef TM4C123_H /* Reset USB */ SYSCTL->SRCR2 |= (1u << 16); @@ -99,7 +118,7 @@ void board_init(void) { /* USB IO Initialization */ SYSCTL->RCGCGPIO |= (1u << 3); - /* Let the clock stabilize */ + /* Let the clock stabilize */ while (!(SYSCTL->PRGPIO & (1u << 3))) {} /* USB IOs to Analog Mode */ @@ -107,16 +126,43 @@ void board_init(void) { GPIOD->DEN &= ~((1u << 4) | (1u << 5)); GPIOD->AMSEL |= ((1u << 4) | (1u << 5)); - uint8_t leds = (1 << LED_PIN_RED) | (1 << LED_PIN_BLUE) | (1 << LED_PIN_GREEN); - uint8_t dirmsk = (1 << LED_PIN_RED) | (1 << LED_PIN_BLUE) | (1 << LED_PIN_GREEN); +#else // TM4C129 + /* Reset USB */ + SYSCTL->SRUSB = 1; - /* Configure GPIO for board LED */ - initialize_board_led(LED_PORT, leds, dirmsk); + for (volatile uint8_t i = 0; i < 20; i++) {} + + SYSCTL->SRUSB = 0; - /* Configure GPIO for board switch */ - GPIOF->DIR &= ~(1 << BOARD_BTN); - GPIOF->PUR |= (1 << BOARD_BTN); - GPIOF->DEN |= (1 << BOARD_BTN); + /* Open the USB clock gate */ + SYSCTL->RCGCUSB = 1; + + /* Let the clock stabilize */ + while(!(SYSCTL->PRUSB & 1)) {} + + /* USB IO Initialization */ + SYSCTL->RCGCGPIO |= (1u << 10); + + /* Let the clock stabilize */ + while (!(SYSCTL->PRGPIO & (1u << 10))) {} + + /* USB IOs to Analog Mode */ + GPIOL->AFSEL &= ~((1u << 6) | (1u << 7)); + GPIOL->DEN &= ~((1u << 6) | (1u << 7)); + GPIOL->AMSEL |= ((1u << 6) | (1u << 7)); + + /* USB Clock Configuration */ + USB0->CC = 0x207; +#endif + + uint8_t leds = 1 << BOARD_LED_PIN; + uint8_t dirmsk = 1 << BOARD_LED_PIN; + + /* Configure GPIO for board button */ + board_button_init(BOARD_BTN_PORT, BOARD_BTN_Msk); + + /* Configure GPIO for board LED */ + board_led_init(LED_PORT, leds, dirmsk); /* Initialize board UART */ board_uart_init(); @@ -125,7 +171,7 @@ void board_init(void) { } void board_led_write(bool state) { - WriteGPIOPin(LED_PORT, (1 << LED_PIN_BLUE), state); + WriteGPIOPin(LED_PORT, (1 << BOARD_LED_PIN), state); } uint32_t board_button_read(void) { diff --git a/hw/bsp/tm4c/family.cmake b/hw/bsp/tm4c/family.cmake index 12f0448a3..41b8a597a 100644 --- a/hw/bsp/tm4c/family.cmake +++ b/hw/bsp/tm4c/family.cmake @@ -5,14 +5,14 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) set(MCU_VARIANT tm4c${MCU_SUB_VARIANT}) set(MCU_VARIANT_UPPER TM4C${MCU_SUB_VARIANT}) -set(SDK_DIR ${TOP}/hw/mcu/ti/${MCU_VARIANT}xx) +set(SDK_DIR ${TOP}/hw/mcu/ti/tm4c) set(CMSIS_DIR ${TOP}/lib/CMSIS_5) # toolchain set up set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) -set(FAMILY_MCUS TM4C123 CACHE INTERNAL "") +set(FAMILY_MCUS TM4C CACHE INTERNAL "") #------------------------------------ # Startup & Linker script @@ -20,7 +20,7 @@ set(FAMILY_MCUS TM4C123 CACHE INTERNAL "") set(LD_FILE_Clang ${LD_FILE_GNU}) set(STARTUP_FILE_GNU ${SDK_DIR}/Source/GCC/${MCU_VARIANT}_startup.c) set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - +set(STARTUP_FILE_IAR ${SDK_DIR}/Source/IAR/${MCU_VARIANT}_startup.c) #------------------------------------ # Board Target #------------------------------------ @@ -29,7 +29,7 @@ function(family_add_board BOARD_TARGET) ${SDK_DIR}/Source/system_${MCU_VARIANT_UPPER}.c ) target_include_directories(${BOARD_TARGET} PUBLIC - ${SDK_DIR}/Include/${MCU_VARIANT_UPPER} + ${SDK_DIR}/Include ${CMSIS_DIR}/CMSIS/Core/Include ) @@ -41,7 +41,7 @@ endfunction() #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) - family_add_tinyusb(${TARGET} OPT_MCU_TM4C123) + family_add_tinyusb(${TARGET} OPT_MCU_TM4C${MCU_SUB_VARIANT}) target_sources(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c @@ -71,13 +71,14 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES - SKIP_LINTING ON - COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) + family_flash_jlink(${TARGET}) family_flash_openocd(${TARGET}) family_flash_uniflash(${TARGET}) endfunction() diff --git a/hw/bsp/tm4c/family.mk b/hw/bsp/tm4c/family.mk index 76ae785b2..bc966d98e 100644 --- a/hw/bsp/tm4c/family.mk +++ b/hw/bsp/tm4c/family.mk @@ -4,11 +4,11 @@ CPU_CORE ?= cortex-m4 MCU_VARIANT = tm4c${MCU_SUB_VARIANT} MCU_VARIANT_UPPER = TM4C${MCU_SUB_VARIANT} -SDK_DIR = hw/mcu/ti/${MCU_VARIANT}xx +SDK_DIR = hw/mcu/ti/tm4c CFLAGS += \ -flto \ - -DCFG_TUSB_MCU=OPT_MCU_TM4C123 \ + -DCFG_TUSB_MCU=OPT_MCU_TM4C${MCU_SUB_VARIANT} \ -uvectors \ # mcu driver cause following warnings @@ -18,7 +18,7 @@ LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs INC += \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(SDK_DIR)/Include/${MCU_VARIANT_UPPER} \ + $(TOP)/$(SDK_DIR)/Include \ $(TOP)/$(BOARD_PATH) SRC_C += \ |