replace dcd_edpt_(clear)stall by usbd_edpt_(clear)stall

- remove dcd_edpt_stalled() from dcd porting

1 files changed, 4 insertions, 4 deletions

diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c
index 728f4d363..4585d520a 100644
--- a/src/class/msc/msc_device.c
+++ b/src/class/msc/msc_device.c
@@ -412,7 +412,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t
             p_msc->stage = MSC_STAGE_STATUS;

 

             tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); // Sense = Invalid Command Operation

-            dcd_edpt_stall(rhport, p_msc->ep_in);

+            usbd_edpt_stall(rhport, p_msc->ep_in);

           }

         }

       }

@@ -512,7 +512,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t
   if ( p_msc->stage == MSC_STAGE_STATUS )

   {

     // Either endpoints is stalled, need to wait until it is cleared by host

-    if ( dcd_edpt_stalled(rhport,  p_msc->ep_in) || dcd_edpt_stalled(rhport,  p_msc->ep_out) )

+    if ( usbd_edpt_stalled(rhport,  p_msc->ep_in) || usbd_edpt_stalled(rhport,  p_msc->ep_out) )

     {

       // simulate an transfer complete with adjusted parameters --> this driver callback will fired again

       dcd_event_xfer_complete(rhport, p_msc->ep_out, 0, XFER_RESULT_SUCCESS, false);

@@ -573,7 +573,7 @@ static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc)
     p_csw->status       = MSC_CSW_STATUS_FAILED;

 

     tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); // Sense = Invalid Command Operation

-    dcd_edpt_stall(rhport, p_msc->ep_in);

+    usbd_edpt_stall(rhport, p_msc->ep_in);

   }

   else if ( nbytes == 0 )

   {

@@ -599,7 +599,7 @@ static void proc_write10_cmd(uint8_t rhport, mscd_interface_t* p_msc)
     p_csw->status       = MSC_CSW_STATUS_FAILED;

 

     tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_DATA_PROTECT, 0x27, 0x00); // Sense = Write protected

-    dcd_edpt_stall(rhport, p_msc->ep_out);

+    usbd_edpt_stall(rhport, p_msc->ep_out);

     return;

   }