Merge pull request #674 from hathach/host-msc

Enhance Host MSC

2 files changed, 167 insertions, 136 deletions

diff --git a/src/class/msc/msc_host.c b/src/class/msc/msc_host.c
index 02ca81e77..34dbec2e3 100644
--- a/src/class/msc/msc_host.c
+++ b/src/class/msc/msc_host.c
@@ -47,14 +47,21 @@ enum
 
 typedef struct
 {
-  uint8_t  itf_num;
-  uint8_t  ep_in;
-  uint8_t  ep_out;
+  uint8_t itf_num;
+  uint8_t ep_in;
+  uint8_t ep_out;
 
-  uint8_t  max_lun;
+  uint8_t max_lun;
 
-  volatile bool mounted;
+  volatile bool configured; // Receive SET_CONFIGURE
+  volatile bool mounted;    // Enumeration is complete
 
+  struct {
+    uint32_t block_size;
+    uint32_t block_count;
+  } capacity[CFG_TUH_MSC_MAXLUN];
+
+  //------------- SCSI -------------//
   uint8_t stage;
   void*   buffer;
   tuh_msc_complete_cb_t complete_cb;
@@ -63,14 +70,15 @@ typedef struct
   msc_csw_t csw;
 }msch_interface_t;
 
-CFG_TUSB_MEM_SECTION static msch_interface_t msch_data[CFG_TUSB_HOST_DEVICE_MAX];
+CFG_TUSB_MEM_SECTION static msch_interface_t _msch_itf[CFG_TUSB_HOST_DEVICE_MAX];
 
-// buffer used to read scsi information when mounted, largest response data currently is inquiry
-CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(4) static uint8_t msch_buffer[sizeof(scsi_inquiry_resp_t)];
+// buffer used to read scsi information when mounted
+// largest response data currently is inquiry TODO Inquiry is not part of enum anymore
+CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(4) static uint8_t _msch_buffer[sizeof(scsi_inquiry_resp_t)];
 
 static inline msch_interface_t* get_itf(uint8_t dev_addr)
 {
-  return &msch_data[dev_addr-1];
+  return &_msch_itf[dev_addr-1];
 }
 
 //--------------------------------------------------------------------+
@@ -82,34 +90,45 @@ uint8_t tuh_msc_get_maxlun(uint8_t dev_addr)
   return p_msc->max_lun;
 }
 
-bool tuh_msc_mounted(uint8_t dev_addr)
+uint32_t tuh_msc_get_block_count(uint8_t dev_addr, uint8_t lun)
 {
   msch_interface_t* p_msc = get_itf(dev_addr);
+  return p_msc->capacity[lun].block_count;
+}
 
-  // is configured can be omitted
-  return tuh_device_is_configured(dev_addr) && p_msc->mounted;
+uint32_t tuh_msc_get_block_size(uint8_t dev_addr, uint8_t lun)
+{
+  msch_interface_t* p_msc = get_itf(dev_addr);
+  return p_msc->capacity[lun].block_size;
 }
 
-bool tuh_msc_is_busy(uint8_t dev_addr)
+bool tuh_msc_mounted(uint8_t dev_addr)
 {
   msch_interface_t* p_msc = get_itf(dev_addr);
-  return p_msc->mounted && hcd_edpt_busy(dev_addr, p_msc->ep_in);
+  return p_msc->mounted;
+}
+
+bool tuh_msc_ready(uint8_t dev_addr)
+{
+  msch_interface_t* p_msc = get_itf(dev_addr);
+  return p_msc->mounted && !hcd_edpt_busy(dev_addr, p_msc->ep_in);
 }
 
 //--------------------------------------------------------------------+
 // PUBLIC API: SCSI COMMAND
 //--------------------------------------------------------------------+
-static inline void msc_cbw_add_signature(msc_cbw_t *p_cbw, uint8_t lun)
+static inline void cbw_init(msc_cbw_t *cbw, uint8_t lun)
 {
-  p_cbw->signature  = MSC_CBW_SIGNATURE;
-  p_cbw->tag        = 0x54555342; // TUSB
-  p_cbw->lun        = lun;
+  tu_memclr(cbw, sizeof(msc_cbw_t));
+  cbw->signature = MSC_CBW_SIGNATURE;
+  cbw->tag       = 0x54555342; // TUSB
+  cbw->lun       = lun;
 }
 
 bool tuh_msc_scsi_command(uint8_t dev_addr, msc_cbw_t const* cbw, void* data, tuh_msc_complete_cb_t complete_cb)
 {
   msch_interface_t* p_msc = get_itf(dev_addr);
-  // TU_VERIFY(p_msc->mounted); // TODO part of the enumeration also use scsi command
+  TU_VERIFY(p_msc->configured);
 
   // TODO claim endpoint
 
@@ -125,12 +144,12 @@ bool tuh_msc_scsi_command(uint8_t dev_addr, msc_cbw_t const* cbw, void* data, tu
 
 bool tuh_msc_read_capacity(uint8_t dev_addr, uint8_t lun, scsi_read_capacity10_resp_t* response, tuh_msc_complete_cb_t complete_cb)
 {
-  msch_interface_t* p_msc = get_itf(dev_addr);
-  if ( !p_msc->mounted ) return false;
+   msch_interface_t* p_msc = get_itf(dev_addr);
+   TU_VERIFY(p_msc->configured);
 
-  msc_cbw_t cbw = { 0 };
+  msc_cbw_t cbw;
+  cbw_init(&cbw, lun);
 
-  msc_cbw_add_signature(&cbw, lun);
   cbw.total_bytes = sizeof(scsi_read_capacity10_resp_t);
   cbw.dir        = TUSB_DIR_IN_MASK;
   cbw.cmd_len    = sizeof(scsi_read_capacity10_t);
@@ -139,11 +158,14 @@ bool tuh_msc_read_capacity(uint8_t dev_addr, uint8_t lun, scsi_read_capacity10_r
   return tuh_msc_scsi_command(dev_addr, &cbw, response, complete_cb);
 }
 
-bool tuh_msc_scsi_inquiry(uint8_t dev_addr, uint8_t lun, scsi_inquiry_resp_t* response, tuh_msc_complete_cb_t complete_cb)
+bool tuh_msc_inquiry(uint8_t dev_addr, uint8_t lun, scsi_inquiry_resp_t* response, tuh_msc_complete_cb_t complete_cb)
 {
-  msc_cbw_t cbw = { 0 };
+  msch_interface_t* p_msc = get_itf(dev_addr);
+  TU_VERIFY(p_msc->mounted);
+
+  msc_cbw_t cbw;
+  cbw_init(&cbw, lun);
 
-  msc_cbw_add_signature(&cbw, lun);
   cbw.total_bytes = sizeof(scsi_inquiry_resp_t);
   cbw.dir         = TUSB_DIR_IN_MASK;
   cbw.cmd_len     = sizeof(scsi_inquiry_t);
@@ -160,26 +182,29 @@ bool tuh_msc_scsi_inquiry(uint8_t dev_addr, uint8_t lun, scsi_inquiry_resp_t* re
 
 bool tuh_msc_test_unit_ready(uint8_t dev_addr, uint8_t lun, tuh_msc_complete_cb_t complete_cb)
 {
-  msc_cbw_t cbw = { 0 };
-  msc_cbw_add_signature(&cbw, lun);
+  msch_interface_t* p_msc = get_itf(dev_addr);
+  TU_VERIFY(p_msc->configured);
 
-  cbw.total_bytes = 0; // Number of bytes
-  cbw.dir        = TUSB_DIR_OUT;
-  cbw.cmd_len    = sizeof(scsi_test_unit_ready_t);
-  cbw.command[0] = SCSI_CMD_TEST_UNIT_READY;
-  cbw.command[1] = lun; // according to wiki TODO need verification
+  msc_cbw_t cbw;
+  cbw_init(&cbw, lun);
+
+  cbw.total_bytes = 0;
+  cbw.dir         = TUSB_DIR_OUT;
+  cbw.cmd_len     = sizeof(scsi_test_unit_ready_t);
+  cbw.command[0]  = SCSI_CMD_TEST_UNIT_READY;
+  cbw.command[1]  = lun; // according to wiki TODO need verification
 
   return tuh_msc_scsi_command(dev_addr, &cbw, NULL, complete_cb);
 }
 
 bool tuh_msc_request_sense(uint8_t dev_addr, uint8_t lun, void *resposne, tuh_msc_complete_cb_t complete_cb)
 {
-  msc_cbw_t cbw = { 0 };
-  msc_cbw_add_signature(&cbw, lun);
+  msc_cbw_t cbw;
+  cbw_init(&cbw, lun);
 
   cbw.total_bytes = 18; // TODO sense response
-  cbw.dir        = TUSB_DIR_IN_MASK;
-  cbw.cmd_len    = sizeof(scsi_request_sense_t);
+  cbw.dir         = TUSB_DIR_IN_MASK;
+  cbw.cmd_len     = sizeof(scsi_request_sense_t);
 
   scsi_request_sense_t const cmd_request_sense =
   {
@@ -192,60 +217,53 @@ bool tuh_msc_request_sense(uint8_t dev_addr, uint8_t lun, void *resposne, tuh_ms
   return tuh_msc_scsi_command(dev_addr, &cbw, resposne, complete_cb);
 }
 
-#if 0
-
-tusb_error_t  tuh_msc_read10(uint8_t dev_addr, uint8_t lun, void * p_buffer, uint32_t lba, uint16_t block_count)
+bool tuh_msc_read10(uint8_t dev_addr, uint8_t lun, void * buffer, uint32_t lba, uint16_t block_count, tuh_msc_complete_cb_t complete_cb)
 {
-  msch_interface_t* p_msch = &msch_data[dev_addr-1];
-
-  //------------- Command Block Wrapper -------------//
-  msc_cbw_add_signature(&p_msch->cbw, lun);
-
-  p_msch->cbw.total_bytes = p_msch->block_size*block_count; // Number of bytes
-  p_msch->cbw.dir        = TUSB_DIR_IN_MASK;
-  p_msch->cbw.cmd_len    = sizeof(scsi_read10_t);
+  msch_interface_t* p_msc = get_itf(dev_addr);
+  TU_VERIFY(p_msc->mounted);
 
-  //------------- SCSI command -------------//
-  scsi_read10_t cmd_read10 =msch_sem_hdl
+  msc_cbw_t cbw;
+  cbw_init(&cbw, lun);
+ 
+  cbw.total_bytes = block_count*p_msc->capacity[lun].block_size;
+  cbw.dir         = TUSB_DIR_IN_MASK;
+  cbw.cmd_len     = sizeof(scsi_read10_t);
+ 
+  scsi_read10_t const cmd_read10 =
   {
-      .cmd_code    = SCSI_CMD_READ_10,
-      .lba         = tu_htonl(lba),
-      .block_count = tu_htons(block_count)
+    .cmd_code    = SCSI_CMD_READ_10,
+    .lba         = tu_htonl(lba),
+    .block_count = tu_htons(block_count)
   };
-
-  memcpy(p_msch->cbw.command, &cmd_read10, p_msch->cbw.cmd_len);
-
-  TU_ASSERT_ERR ( send_cbw(dev_addr, p_msch, p_buffer));
-
-  return TUSB_ERROR_NONE;
+ 
+  memcpy(cbw.command, &cmd_read10, cbw.cmd_len);
+ 
+  return tuh_msc_scsi_command(dev_addr, &cbw, buffer, complete_cb);
 }
-
-tusb_error_t tuh_msc_write10(uint8_t dev_addr, uint8_t lun, void const * p_buffer, uint32_t lba, uint16_t block_count)
+ 
+bool tuh_msc_write10(uint8_t dev_addr, uint8_t lun, void const * buffer, uint32_t lba, uint16_t block_count, tuh_msc_complete_cb_t complete_cb)
 {
-  msch_interface_t* p_msch = &msch_data[dev_addr-1];
+  msch_interface_t* p_msc = get_itf(dev_addr);
+  TU_VERIFY(p_msc->mounted);
 
-  //------------- Command Block Wrapper -------------//
-  msc_cbw_add_signature(&p_msch->cbw, lun);
+  msc_cbw_t cbw;
+  cbw_init(&cbw, lun);
 
-  p_msch->cbw.total_bytes = p_msch->block_size*block_count; // Number of bytes
-  p_msch->cbw.dir        = TUSB_DIR_OUT;
-  p_msch->cbw.cmd_len    = sizeof(scsi_write10_t);
+  cbw.total_bytes = block_count*p_msc->capacity[lun].block_size;
+  cbw.dir         = TUSB_DIR_OUT;
+  cbw.cmd_len     = sizeof(scsi_write10_t);
 
-  //------------- SCSI command -------------//
-  scsi_write10_t cmd_write10 =
+  scsi_write10_t const cmd_write10 =
   {
-      .cmd_code    = SCSI_CMD_WRITE_10,
-      .lba         = tu_htonl(lba),
-      .block_count = tu_htons(block_count)
+    .cmd_code    = SCSI_CMD_WRITE_10,
+    .lba         = tu_htonl(lba),
+    .block_count = tu_htons(block_count)
   };
 
-  memcpy(p_msch->cbw.command, &cmd_write10, p_msch->cbw.cmd_len);
-
-  TU_ASSERT_ERR ( send_cbw(dev_addr, p_msch, (void*) p_buffer));
+  memcpy(cbw.command, &cmd_write10, cbw.cmd_len);
 
-  return TUSB_ERROR_NONE;
+  return tuh_msc_scsi_command(dev_addr, &cbw, (void*) buffer, complete_cb);
 }
-#endif
 
 #if 0
 // MSC interface Reset (not used now)
@@ -273,14 +291,14 @@ bool tuh_msc_reset(uint8_t dev_addr)
 //--------------------------------------------------------------------+
 void msch_init(void)
 {
-  tu_memclr(msch_data, sizeof(msch_interface_t)*CFG_TUSB_HOST_DEVICE_MAX);
+  tu_memclr(_msch_itf, sizeof(msch_interface_t)*CFG_TUSB_HOST_DEVICE_MAX);
 }
 
 void msch_close(uint8_t dev_addr)
 {
   msch_interface_t* p_msc = get_itf(dev_addr);
   tu_memclr(p_msc, sizeof(msch_interface_t));
-  tuh_msc_unmounted_cb(dev_addr); // invoke Application Callback
+  tuh_msc_unmount_cb(dev_addr); // invoke Application Callback
 }
 
 bool msch_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes)
@@ -337,6 +355,7 @@ bool msch_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32
 static bool config_get_maxlun_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result);
 static bool config_test_unit_ready_complete(uint8_t dev_addr, msc_cbw_t const* cbw, msc_csw_t const* csw);
 static bool config_request_sense_complete(uint8_t dev_addr, msc_cbw_t const* cbw, msc_csw_t const* csw);
+static bool config_read_capacity_complete(uint8_t dev_addr, msc_cbw_t const* cbw, msc_csw_t const* csw);
 
 bool msch_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *itf_desc, uint16_t *p_length)
 {
@@ -375,6 +394,8 @@ bool msch_set_config(uint8_t dev_addr, uint8_t itf_num)
   msch_interface_t* p_msc = get_itf(dev_addr);
   TU_ASSERT(p_msc->itf_num == itf_num);
 
+  p_msc->configured = true;
+
   //------------- Get Max Lun -------------//
   TU_LOG2("MSC Get Max Lun\r\n");
   tusb_control_request_t request =
@@ -402,12 +423,13 @@ static bool config_get_maxlun_complete (uint8_t dev_addr, tusb_control_request_t
   msch_interface_t* p_msc = get_itf(dev_addr);
 
   // STALL means zero
-  p_msc->max_lun = (XFER_RESULT_SUCCESS == result) ? msch_buffer[0] : 0;
+  p_msc->max_lun = (XFER_RESULT_SUCCESS == result) ? _msch_buffer[0] : 0;
   p_msc->max_lun++; // MAX LUN is minus 1 by specs
 
   // TODO multiple LUN support
   TU_LOG2("SCSI Test Unit Ready\r\n");
-  tuh_msc_test_unit_ready(dev_addr, 0, config_test_unit_ready_complete);
+  uint8_t const lun = 0;
+  tuh_msc_test_unit_ready(dev_addr, lun, config_test_unit_ready_complete);
 
   return true;
 }
@@ -416,19 +438,16 @@ static bool config_test_unit_ready_complete(uint8_t dev_addr, msc_cbw_t const* c
 {
   if (csw->status == 0)
   {
-    msch_interface_t* p_msc = get_itf(dev_addr);
-
-    usbh_driver_set_config_complete(dev_addr, p_msc->itf_num);
-
-    // Unit is ready, Enumeration is complete
-    p_msc->mounted = true;
-    tuh_msc_mounted_cb(dev_addr);
+    // Unit is ready, read its capacity
+    TU_LOG2("SCSI Read Capacity\r\n");
+    tuh_msc_read_capacity(dev_addr, cbw->lun, (scsi_read_capacity10_resp_t*) _msch_buffer, config_read_capacity_complete);
   }else
   {
     // Note: During enumeration, some device fails Test Unit Ready and require a few retries
     // with Request Sense to start working !!
     // TODO limit number of retries
-    TU_ASSERT(tuh_msc_request_sense(dev_addr, cbw->lun, msch_buffer, config_request_sense_complete));
+    TU_LOG2("SCSI Request Sense\r\n");
+    TU_ASSERT(tuh_msc_request_sense(dev_addr, cbw->lun, _msch_buffer, config_request_sense_complete));
   }
 
   return true;
@@ -441,4 +460,24 @@ static bool config_request_sense_complete(uint8_t dev_addr, msc_cbw_t const* cbw
   return true;
 }
 
+static bool config_read_capacity_complete(uint8_t dev_addr, msc_cbw_t const* cbw, msc_csw_t const* csw)
+{
+  TU_ASSERT(csw->status == 0);
+
+  msch_interface_t* p_msc = get_itf(dev_addr);
+
+  // Capacity response field: Block size and Last LBA are both Big-Endian
+  scsi_read_capacity10_resp_t* resp = (scsi_read_capacity10_resp_t*) _msch_buffer;
+  p_msc->capacity[cbw->lun].block_count = tu_ntohl(resp->last_lba) + 1;
+  p_msc->capacity[cbw->lun].block_size = tu_ntohl(resp->block_size);
+
+  // Mark enumeration is complete
+  p_msc->mounted = true;
+  tuh_msc_mount_cb(dev_addr);
+
+  usbh_driver_set_config_complete(dev_addr, p_msc->itf_num);
+
+  return true;
+}
+
 #endif
diff --git a/src/class/msc/msc_host.h b/src/class/msc/msc_host.h
index 5913350b8..8116e729f 100644
--- a/src/class/msc/msc_host.h
+++ b/src/class/msc/msc_host.h
@@ -35,6 +35,15 @@
  extern "C" {
 #endif
 
+//--------------------------------------------------------------------+
+// Class Driver Configuration
+//--------------------------------------------------------------------+
+
+#ifndef CFG_TUH_MSC_MAXLUN
+#define CFG_TUH_MSC_MAXLUN  4
+#endif
+
+
 /** \addtogroup ClassDriver_MSC
  *  @{
  * \defgroup MSC_Host Host
@@ -51,73 +60,56 @@ typedef bool (*tuh_msc_complete_cb_t)(uint8_t dev_addr, msc_cbw_t const* cbw, ms
 // This function true after tuh_msc_mounted_cb() and false after tuh_msc_unmounted_cb()
 bool tuh_msc_mounted(uint8_t dev_addr);
 
-/** \brief      Check if the interface is currently busy or not
- * \param[in]   dev_addr device address
- * \retval      true if the interface is busy meaning the stack is still transferring/waiting data from/to device
- * \retval      false if the interface is not busy meaning the stack successfully transferred data from/to device
- * \note        This function is used to check if previous transfer is complete (success or error), so that the next transfer
- *              can be scheduled. User needs to make sure the corresponding interface is mounted (by \ref tuh_msc_is_mounted)
- *              before calling this function
- */
-bool          tuh_msc_is_busy(uint8_t dev_addr);
+// Check if the interface is currently ready or busy transferring data
+bool tuh_msc_ready(uint8_t dev_addr);
 
 // Get Max Lun
 uint8_t tuh_msc_get_maxlun(uint8_t dev_addr);
 
-// Carry out a full SCSI command (cbw, data, csw) in non-blocking manner.
-// `complete_cb` callback is invoked when SCSI op is complete.
+// Get number of block
+uint32_t tuh_msc_get_block_count(uint8_t dev_addr, uint8_t lun);
+
+// Get block size in bytes
+uint32_t tuh_msc_get_block_size(uint8_t dev_addr, uint8_t lun);
+
+// Perform a full SCSI command (cbw, data, csw) in non-blocking manner.
+// Complete callback is invoked when SCSI op is complete.
 // return true if success, false if there is already pending operation.
 bool tuh_msc_scsi_command(uint8_t dev_addr, msc_cbw_t const* cbw, void* data, tuh_msc_complete_cb_t complete_cb);
 
-// Carry out SCSI INQUIRY command in non-blocking manner.
-bool tuh_msc_scsi_inquiry(uint8_t dev_addr, uint8_t lun, scsi_inquiry_resp_t* response, tuh_msc_complete_cb_t complete_cb);
+// Perform SCSI Inquiry command
+// Complete callback is invoked when SCSI op is complete.
+bool tuh_msc_inquiry(uint8_t dev_addr, uint8_t lun, scsi_inquiry_resp_t* response, tuh_msc_complete_cb_t complete_cb);
 
-// Carry out SCSI REQUEST SENSE (10) command in non-blocking manner.
+// Perform SCSI Test Unit Ready command
+// Complete callback is invoked when SCSI op is complete.
 bool tuh_msc_test_unit_ready(uint8_t dev_addr, uint8_t lun, tuh_msc_complete_cb_t complete_cb);
 
-// Carry out SCSI REQUEST SENSE (10) command in non-blocking manner.
+// Perform SCSI Request Sense 10 command
+// Complete callback is invoked when SCSI op is complete.
 bool tuh_msc_request_sense(uint8_t dev_addr, uint8_t lun, void *resposne, tuh_msc_complete_cb_t complete_cb);
 
-// Carry out SCSI READ CAPACITY (10) command in non-blocking manner.
-bool tuh_msc_read_capacity(uint8_t dev_addr, uint8_t lun, scsi_read_capacity10_resp_t* response, tuh_msc_complete_cb_t complete_cb);
+// Perform SCSI Read 10 command. Read n blocks starting from LBA to buffer
+// Complete callback is invoked when SCSI op is complete.
+bool  tuh_msc_read10(uint8_t dev_addr, uint8_t lun, void * buffer, uint32_t lba, uint16_t block_count, tuh_msc_complete_cb_t complete_cb);
 
-#if 0
-/** \brief 			Perform SCSI READ 10 command to read data from MassStorage device
- * \param[in]		dev_addr	device address
- * \param[in]		lun       Targeted Logical Unit
- * \param[out]	p_buffer  Buffer used to store data read from device. Must be accessible by USB controller (see \ref CFG_TUSB_MEM_SECTION)
- * \param[in]		lba       Starting Logical Block Address to be read
- * \param[in]		block_count Number of Block to be read
- * \retval      TUSB_ERROR_NONE on success
- * \retval      TUSB_ERROR_INTERFACE_IS_BUSY if the interface is already transferring data with device
- * \retval      TUSB_ERROR_DEVICE_NOT_READY if device is not yet configured (by SET CONFIGURED request)
- * \retval      TUSB_ERROR_INVALID_PARA if input parameters are not correct
- * \note        This function is non-blocking and returns immediately. The result of USB transfer will be reported by the interface's callback function
- */
-tusb_error_t tuh_msc_read10 (uint8_t dev_addr, uint8_t lun, void * p_buffer, uint32_t lba, uint16_t block_count);
+// Perform SCSI Write 10 command. Write n blocks starting from LBA to device
+// Complete callback is invoked when SCSI op is complete.
+bool tuh_msc_write10(uint8_t dev_addr, uint8_t lun, void const * buffer, uint32_t lba, uint16_t block_count, tuh_msc_complete_cb_t complete_cb);
 
-/** \brief 			Perform SCSI WRITE 10 command to write data to MassStorage device
- * \param[in]		dev_addr	device address
- * \param[in]		lun       Targeted Logical Unit
- * \param[in]	  p_buffer  Buffer containing data. Must be accessible by USB controller (see \ref CFG_TUSB_MEM_SECTION)
- * \param[in]		lba       Starting Logical Block Address to be written
- * \param[in]		block_count Number of Block to be written
- * \retval      TUSB_ERROR_NONE on success
- * \retval      TUSB_ERROR_INTERFACE_IS_BUSY if the interface is already transferring data with device
- * \retval      TUSB_ERROR_DEVICE_NOT_READY if device is not yet configured (by SET CONFIGURED request)
- * \retval      TUSB_ERROR_INVALID_PARA if input parameters are not correct
- * \note        This function is non-blocking and returns immediately. The result of USB transfer will be reported by the interface's callback function
- */
-tusb_error_t tuh_msc_write10(uint8_t dev_addr, uint8_t lun, void const * p_buffer, uint32_t lba, uint16_t block_count);
-#endif
+// Perform SCSI Read Capacity 10 command
+// Complete callback is invoked when SCSI op is complete.
+// Note: during enumeration, host stack already carried out this request. Application can retrieve capacity by
+// simply call tuh_msc_get_block_count() and tuh_msc_get_block_size()
+bool tuh_msc_read_capacity(uint8_t dev_addr, uint8_t lun, scsi_read_capacity10_resp_t* response, tuh_msc_complete_cb_t complete_cb);
 
 //------------- Application Callback -------------//
 
 // Invoked when a device with MassStorage interface is mounted
-void tuh_msc_mounted_cb(uint8_t dev_addr);
+void tuh_msc_mount_cb(uint8_t dev_addr);
 
 // Invoked when a device with MassStorage interface is unmounted
-void tuh_msc_unmounted_cb(uint8_t dev_addr);
+void tuh_msc_unmount_cb(uint8_t dev_addr);
 
 //--------------------------------------------------------------------+
 // Internal Class Driver API