diff options
| author | hathach <[email protected]> | 2020-04-17 13:38:22 +0700 |
|---|---|---|
| committer | hathach <[email protected]> | 2020-04-17 13:38:22 +0700 |
| commit | 05476d9ad72321aa6e57ff5acbc4b25e1366fead (patch) | |
| tree | 10a12e71a679243ad5775ed7e0088242b8e763c8 /src/device | |
| parent | f4df82939955d86f6c2e826e1bc9f4b5bb713df8 (diff) | |
| parent | 85f0894fff89baaaa91a6dc3554a3149fc2fc062 (diff) | |
Merge branch 'master' into remove-dcd-set-config
Diffstat (limited to 'src/device')
| -rw-r--r-- | src/device/dcd.h | 12 | ||||
| -rw-r--r-- | src/device/usbd.c | 192 | ||||
| -rw-r--r-- | src/device/usbd.h | 50 | ||||
| -rw-r--r-- | src/device/usbd_pvt.h | 1 |
4 files changed, 119 insertions, 136 deletions
diff --git a/src/device/dcd.h b/src/device/dcd.h index f4e6edb95..99a0e01ca 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -89,7 +89,7 @@ typedef struct TU_ATTR_ALIGNED(4) void dcd_init (uint8_t rhport); // Interrupt Handler -void dcd_irq_handler(uint8_t rhport) TU_ATTR_USED; +void dcd_int_handler(uint8_t rhport); // Enable device interrupt void dcd_int_enable (uint8_t rhport); @@ -106,10 +106,10 @@ void dcd_set_config (uint8_t rhport, uint8_t config_num); // Wake up host void dcd_remote_wakeup(uint8_t rhport); -// Connect or disconnect D+/D- line pull-up resistor. -// Defined in dcd source if MCU has internal pull-up. -// Otherwise, may be defined in BSP. +// Connect by enabling internal pull-up resistor on D+/D- void dcd_connect(uint8_t rhport) TU_ATTR_WEAK; + +// Disconnect by disabling internal pull-up resistor on D+/D- void dcd_disconnect(uint8_t rhport) TU_ATTR_WEAK; //--------------------------------------------------------------------+ @@ -123,6 +123,10 @@ void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const * re // Configure endpoint's registers according to descriptor bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc); +// Close an endpoint. +// Since it is weak, caller must TU_ASSERT this function's existence before calling it. +void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr) TU_ATTR_WEAK; + // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes); diff --git a/src/device/usbd.c b/src/device/usbd.c index 55d6aa7eb..26183c960 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -73,8 +73,17 @@ enum { DRVID_INVALID = 0xFFu }; //--------------------------------------------------------------------+ // Class Driver //--------------------------------------------------------------------+ -typedef struct { - uint8_t class_code; +#if CFG_TUSB_DEBUG >= 2 + #define DRIVER_NAME(_name) .name = _name, +#else + #define DRIVER_NAME(_name) +#endif + +typedef struct +{ + #if CFG_TUSB_DEBUG >= 2 + char const* name; + #endif void (* init ) (void); void (* reset ) (uint8_t rhport); @@ -89,7 +98,7 @@ static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_CDC { - .class_code = TUSB_CLASS_CDC, + DRIVER_NAME("CDC") .init = cdcd_init, .reset = cdcd_reset, .open = cdcd_open, @@ -102,7 +111,7 @@ static usbd_class_driver_t const _usbd_driver[] = #if CFG_TUD_MSC { - .class_code = TUSB_CLASS_MSC, + DRIVER_NAME("MSC") .init = mscd_init, .reset = mscd_reset, .open = mscd_open, @@ -115,7 +124,7 @@ static usbd_class_driver_t const _usbd_driver[] = #if CFG_TUD_HID { - .class_code = TUSB_CLASS_HID, + DRIVER_NAME("HID") .init = hidd_init, .reset = hidd_reset, .open = hidd_open, @@ -128,7 +137,7 @@ static usbd_class_driver_t const _usbd_driver[] = #if CFG_TUD_MIDI { - .class_code = TUSB_CLASS_AUDIO, + DRIVER_NAME("MIDI") .init = midid_init, .open = midid_open, .reset = midid_reset, @@ -141,7 +150,7 @@ static usbd_class_driver_t const _usbd_driver[] = #if CFG_TUD_VENDOR { - .class_code = TUSB_CLASS_VENDOR_SPECIFIC, + DRIVER_NAME("VENDOR") .init = vendord_init, .reset = vendord_reset, .open = vendord_open, @@ -153,12 +162,8 @@ static usbd_class_driver_t const _usbd_driver[] = #endif #if CFG_TUD_USBTMC - // Presently USBTMC is the only defined class with the APP_SPECIFIC class code. - // We maybe need to add subclass codes here, or a callback to ask if a driver can - // handle a particular interface. { - .class_code = TUD_USBTMC_APP_CLASS, - //.subclass_code = TUD_USBTMC_APP_SUBCLASS + DRIVER_NAME("TMC") .init = usbtmcd_init_cb, .reset = usbtmcd_reset_cb, .open = usbtmcd_open_cb, @@ -171,8 +176,7 @@ static usbd_class_driver_t const _usbd_driver[] = #if CFG_TUD_DFU_RT { - .class_code = TUD_DFU_APP_CLASS, - //.subclass_code = TUD_DFU_APP_SUBCLASS + DRIVER_NAME("DFU-RT") .init = dfu_rtd_init, .reset = dfu_rtd_reset, .open = dfu_rtd_open, @@ -185,19 +189,14 @@ static usbd_class_driver_t const _usbd_driver[] = #if CFG_TUD_NET { - .class_code = -#if CFG_TUD_NET == OPT_NET_RNDIS - TUD_RNDIS_ITF_CLASS, -#else - TUSB_CLASS_CDC, -#endif + DRIVER_NAME("NET") .init = netd_init, .reset = netd_reset, .open = netd_open, .control_request = netd_control_request, .control_complete = netd_control_complete, .xfer_cb = netd_xfer_cb, - .sof = NULL + .sof = NULL, }, #endif }; @@ -244,32 +243,6 @@ static char const* const _usbd_event_str[DCD_EVENT_COUNT] = "FUNC_CALL" }; -// must be same driver order as usbd_class_drivers[] -static char const* const _usbd_driver_str[USBD_CLASS_DRIVER_COUNT] = -{ - #if CFG_TUD_CDC - "CDC", - #endif - #if CFG_TUD_MSC - "MSC", - #endif - #if CFG_TUD_HID - "HID", - #endif - #if CFG_TUD_MIDI - "MIDI", - #endif - #if CFG_TUD_VENDOR - "Vendor", - #endif - #if CFG_TUD_USBTMC - "USBTMC" - #endif - #if CFG_TUD_NET - "NET" - #endif -}; - static char const* const _tusb_std_request_str[] = { "Get Status" , @@ -326,7 +299,7 @@ bool tud_init (void) // Init class drivers for (uint8_t i = 0; i < USBD_CLASS_DRIVER_COUNT; i++) { - TU_LOG2("%s init\r\n", _usbd_driver_str[i]); + TU_LOG2("%s init\r\n", _usbd_driver[i].name); _usbd_driver[i].init(); } @@ -435,7 +408,7 @@ void tud_task (void) uint8_t const drv_id = _usbd_dev.ep2drv[epnum][ep_dir]; TU_ASSERT(drv_id < USBD_CLASS_DRIVER_COUNT,); - TU_LOG2(" %s xfer callback\r\n", _usbd_driver_str[drv_id]); + TU_LOG2(" %s xfer callback\r\n", _usbd_driver[drv_id].name); _usbd_driver[drv_id].xfer_cb(event.rhport, ep_addr, event.xfer_complete.result, event.xfer_complete.len); } } @@ -480,7 +453,7 @@ static bool invoke_class_control(uint8_t rhport, uint8_t drvid, tusb_control_req TU_ASSERT(_usbd_driver[drvid].control_request); usbd_control_set_complete_callback(_usbd_driver[drvid].control_complete); - TU_LOG2(" %s control request\r\n", _usbd_driver_str[drvid]); + TU_LOG2(" %s control request\r\n", _usbd_driver[drvid].name); return _usbd_driver[drvid].control_request(rhport, request); } @@ -596,38 +569,17 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const uint8_t const drvid = _usbd_dev.itf2drv[itf]; TU_VERIFY(drvid < USBD_CLASS_DRIVER_COUNT); - if (p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD) + // all requests to Interface (STD or Class) is forwarded to class driver. + // notable requests are: GET HID REPORT DESCRIPTOR, SET_INTERFACE, GET_INTERFACE + if ( !invoke_class_control(rhport, drvid, p_request) ) { - switch ( p_request->bRequest ) - { - case TUSB_REQ_GET_INTERFACE: - { - // TODO not support alternate interface yet - uint8_t alternate = 0; - tud_control_xfer(rhport, p_request, &alternate, 1); - } - break; + // For GET_INTERFACE, it is mandatory to respond even if the class + // driver doesn't use alternate settings. + TU_VERIFY( TUSB_REQ_TYPE_STANDARD == p_request->bmRequestType_bit.type && + TUSB_REQ_GET_INTERFACE == p_request->bRequest); - case TUSB_REQ_SET_INTERFACE: - { - uint8_t const alternate = (uint8_t) p_request->wValue; - - // TODO not support alternate interface yet - TU_ASSERT(alternate == 0); - tud_control_status(rhport, p_request); - } - break; - - default: - // forward to class driver: "STD request to Interface" - // GET HID REPORT DESCRIPTOR falls into this case - TU_VERIFY(invoke_class_control(rhport, drvid, p_request)); - break; - } - }else - { - // forward to class driver: "non-STD request to Interface" - TU_VERIFY(invoke_class_control(rhport, drvid, p_request)); + uint8_t alternate = 0; + tud_control_xfer(rhport, p_request, &alternate, 1); } } break; @@ -727,37 +679,59 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num) while( p_desc < desc_end ) { - // Each interface always starts with Interface or Association descriptor + tusb_desc_interface_assoc_t const * desc_itf_assoc = NULL; + + // Class will always starts with Interface Association (if any) and then Interface descriptor if ( TUSB_DESC_INTERFACE_ASSOCIATION == tu_desc_type(p_desc) ) { - p_desc = tu_desc_next(p_desc); // ignore Interface Association - }else - { - TU_ASSERT( TUSB_DESC_INTERFACE == tu_desc_type(p_desc) ); + desc_itf_assoc = (tusb_desc_interface_assoc_t const *) p_desc; + p_desc = tu_desc_next(p_desc); // next to Interface + } + + TU_ASSERT( TUSB_DESC_INTERFACE == tu_desc_type(p_desc) ); - tusb_desc_interface_t* desc_itf = (tusb_desc_interface_t*) p_desc; + tusb_desc_interface_t const * desc_itf = (tusb_desc_interface_t const*) p_desc; + uint8_t drv_id; + uint16_t drv_len; + + for (drv_id = 0; drv_id < USBD_CLASS_DRIVER_COUNT; drv_id++) + { + usbd_class_driver_t const *driver = &_usbd_driver[drv_id]; - // Check if class is supported - uint8_t drv_id; - for (drv_id = 0; drv_id < USBD_CLASS_DRIVER_COUNT; drv_id++) + drv_len = 0; + if ( driver->open(rhport, desc_itf, &drv_len) ) { - if ( _usbd_driver[drv_id].class_code == desc_itf->bInterfaceClass ) break; - } - TU_ASSERT( drv_id < USBD_CLASS_DRIVER_COUNT ); + // Interface number must not be used already + TU_ASSERT( DRVID_INVALID == _usbd_dev.itf2drv[desc_itf->bInterfaceNumber] ); - // Interface number must not be used already TODO alternate interface - TU_ASSERT( DRVID_INVALID == _usbd_dev.itf2drv[desc_itf->bInterfaceNumber] ); - _usbd_dev.itf2drv[desc_itf->bInterfaceNumber] = drv_id; + TU_LOG2(" %s open\r\n", _usbd_driver[drv_id].name); + _usbd_dev.itf2drv[desc_itf->bInterfaceNumber] = drv_id; - uint16_t itf_len=0; - TU_LOG2(" %s open\r\n", _usbd_driver_str[drv_id]); - TU_ASSERT( _usbd_driver[drv_id].open(rhport, desc_itf, &itf_len) ); - TU_ASSERT( itf_len >= sizeof(tusb_desc_interface_t) ); + // If IAD exist, assign all interfaces to the same driver + if (desc_itf_assoc) + { + // IAD's first interface number and class/subclass/protocol should match with opened interface + TU_ASSERT(desc_itf_assoc->bFirstInterface == desc_itf->bInterfaceNumber && + desc_itf_assoc->bFunctionClass == desc_itf->bInterfaceClass && + desc_itf_assoc->bFunctionSubClass == desc_itf->bInterfaceSubClass && + desc_itf_assoc->bFunctionProtocol == desc_itf->bInterfaceProtocol); - mark_interface_endpoint(_usbd_dev.ep2drv, p_desc, itf_len, drv_id); + for(uint8_t i=1; i<desc_itf_assoc->bInterfaceCount; i++) + { + _usbd_dev.itf2drv[desc_itf->bInterfaceNumber+i] = drv_id; + } + } - p_desc += itf_len; // next interface + break; + } } + + // Assert if cannot find supported driver + TU_ASSERT( drv_id < USBD_CLASS_DRIVER_COUNT && drv_len >= sizeof(tusb_desc_interface_t) ); + + mark_interface_endpoint(_usbd_dev.ep2drv, p_desc, drv_len, drv_id); // TODO refactor + + p_desc += drv_len; // next interface } // invoke callback @@ -1035,4 +1009,20 @@ bool usbd_edpt_stalled(uint8_t rhport, uint8_t ep_addr) return _usbd_dev.ep_status[epnum][dir].stalled; } +/** + * usbd_edpt_close will disable an endpoint. + * + * In progress transfers on this EP may be delivered after this call. + * + */ +void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr) +{ + TU_ASSERT(dcd_edpt_close, /**/); + TU_LOG2(" CLOSING Endpoint: 0x%02X\r\n", ep_addr); + + dcd_edpt_close(rhport, ep_addr); + + return; +} + #endif diff --git a/src/device/usbd.h b/src/device/usbd.h index 6b31d8113..fcb4e5c5f 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -48,7 +48,7 @@ bool tud_init (void); void tud_task (void); // Interrupt handler, name alias to DCD -#define tud_irq_handler dcd_irq_handler +#define tud_int_handler dcd_int_handler // Check if device is connected and configured bool tud_mounted(void); @@ -183,9 +183,9 @@ TU_ATTR_WEAK bool tud_vendor_control_complete_cb(uint8_t rhport, tusb_control_re // Interface number, string index, EP notification address and size, EP data address (out, in) and size. #define TUD_CDC_DESCRIPTOR(_itfnum, _stridx, _ep_notif, _ep_notif_size, _epout, _epin, _epsize) \ /* Interface Associate */\ - 8, TUSB_DESC_INTERFACE_ASSOCIATION, _itfnum, 2, TUSB_CLASS_CDC, CDC_COMM_SUBCLASS_ABSTRACT_CONTROL_MODEL, CDC_COMM_PROTOCOL_ATCOMMAND, 0,\ + 8, TUSB_DESC_INTERFACE_ASSOCIATION, _itfnum, 2, TUSB_CLASS_CDC, CDC_COMM_SUBCLASS_ABSTRACT_CONTROL_MODEL, CDC_COMM_PROTOCOL_NONE, 0,\ /* CDC Control Interface */\ - 9, TUSB_DESC_INTERFACE, _itfnum, 0, 1, TUSB_CLASS_CDC, CDC_COMM_SUBCLASS_ABSTRACT_CONTROL_MODEL, CDC_COMM_PROTOCOL_ATCOMMAND, _stridx,\ + 9, TUSB_DESC_INTERFACE, _itfnum, 0, 1, TUSB_CLASS_CDC, CDC_COMM_SUBCLASS_ABSTRACT_CONTROL_MODEL, CDC_COMM_PROTOCOL_NONE, _stridx,\ /* CDC Header */\ 5, TUSB_DESC_CS_INTERFACE, CDC_FUNC_DESC_HEADER, U16_TO_U8S_LE(0x0120),\ /* CDC Call */\ @@ -291,23 +291,23 @@ TU_ATTR_WEAK bool tud_vendor_control_complete_cb(uint8_t rhport, tusb_control_re // Interface number, number of endpoints, EP string index, USB_TMC_PROTOCOL*, bulk-out endpoint ID, // bulk-in endpoint ID #define TUD_USBTMC_IF_DESCRIPTOR(_itfnum, _bNumEndpoints, _stridx, _itfProtocol) \ -/* Interface */ \ + /* Interface */ \ 0x09, TUSB_DESC_INTERFACE, _itfnum, 0x00, _bNumEndpoints, TUD_USBTMC_APP_CLASS, TUD_USBTMC_APP_SUBCLASS, _itfProtocol, _stridx #define TUD_USBTMC_IF_DESCRIPTOR_LEN 9u #define TUD_USBTMC_BULK_DESCRIPTORS(_epout, _epin, _bulk_epsize) \ -/* Endpoint Out */ \ -7, TUSB_DESC_ENDPOINT, _epout, TUSB_XFER_BULK, U16_TO_U8S_LE(_bulk_epsize), 0u, \ -/* Endpoint In */ \ -7, TUSB_DESC_ENDPOINT, _epin, TUSB_XFER_BULK, U16_TO_U8S_LE(_bulk_epsize), 0u + /* Endpoint Out */ \ + 7, TUSB_DESC_ENDPOINT, _epout, TUSB_XFER_BULK, U16_TO_U8S_LE(_bulk_epsize), 0u, \ + /* Endpoint In */ \ + 7, TUSB_DESC_ENDPOINT, _epin, TUSB_XFER_BULK, U16_TO_U8S_LE(_bulk_epsize), 0u #define TUD_USBTMC_BULK_DESCRIPTORS_LEN (7u+7u) /* optional interrupt endpoint */ \ // _int_pollingInterval : for LS/FS, expressed in frames (1ms each). 16 may be a good number? #define TUD_USBTMC_INT_DESCRIPTOR(_ep_interrupt, _ep_interrupt_size, _int_pollingInterval ) \ -7, TUSB_DESC_ENDPOINT, _ep_interrupt, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(_ep_interrupt_size), 0x16 + 7, TUSB_DESC_ENDPOINT, _ep_interrupt, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(_ep_interrupt_size), 0x16 #define TUD_USBTMC_INT_DESCRIPTOR_LEN (7u) @@ -342,12 +342,14 @@ TU_ATTR_WEAK bool tud_vendor_control_complete_cb(uint8_t rhport, tusb_control_re //------------- CDC-ECM -------------// -// Length of template descriptor: 62 bytes -#define TUD_CDC_ECM_DESC_LEN (9+5+5+13+7+9+7+7) +// Length of template descriptor: 71 bytes +#define TUD_CDC_ECM_DESC_LEN (8+9+5+5+13+7+9+9+7+7) // CDC-ECM Descriptor Template // Interface number, description string index, MAC address string index, EP notification address and size, EP data address (out, in), and size, max segment size. #define TUD_CDC_ECM_DESCRIPTOR(_itfnum, _desc_stridx, _mac_stridx, _ep_notif, _ep_notif_size, _epout, _epin, _epsize, _maxsegmentsize) \ + /* Interface Association */\ + 8, TUSB_DESC_INTERFACE_ASSOCIATION, _itfnum, 2, TUSB_CLASS_CDC, CDC_COMM_SUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL, 0, 0,\ /* CDC Control Interface */\ 9, TUSB_DESC_INTERFACE, _itfnum, 0, 1, TUSB_CLASS_CDC, CDC_COMM_SUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL, 0, _desc_stridx,\ /* CDC-ECM Header */\ @@ -358,8 +360,10 @@ TU_ATTR_WEAK bool tud_vendor_control_complete_cb(uint8_t rhport, tusb_control_re 13, TUSB_DESC_CS_INTERFACE, CDC_FUNC_DESC_ETHERNET_NETWORKING, _mac_stridx, 0, 0, 0, 0, U16_TO_U8S_LE(_maxsegmentsize), U16_TO_U8S_LE(0), 0,\ /* Endpoint Notification */\ 7, TUSB_DESC_ENDPOINT, _ep_notif, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(_ep_notif_size), 1,\ - /* CDC Data Interface */\ - 9, TUSB_DESC_INTERFACE, (uint8_t)((_itfnum)+1), 0, 2, TUSB_CLASS_CDC_DATA, 0, 0, 0,\ + /* CDC Data Interface (default inactive) */\ + 9, TUSB_DESC_INTERFACE, (uint8_t)((_itfnum)+1), 0, 0, TUSB_CLASS_CDC_DATA, 0, 0, 0,\ + /* CDC Data Interface (alternative active) */\ + 9, TUSB_DESC_INTERFACE, (uint8_t)((_itfnum)+1), 1, 2, TUSB_CLASS_CDC_DATA, 0, 0, 0,\ /* Endpoint In */\ 7, TUSB_DESC_ENDPOINT, _epin, TUSB_XFER_BULK, U16_TO_U8S_LE(_epsize), 0,\ /* Endpoint Out */\ @@ -372,10 +376,10 @@ TU_ATTR_WEAK bool tud_vendor_control_complete_cb(uint8_t rhport, tusb_control_re /* Windows XP */ #define TUD_RNDIS_ITF_CLASS TUSB_CLASS_CDC #define TUD_RNDIS_ITF_SUBCLASS CDC_COMM_SUBCLASS_ABSTRACT_CONTROL_MODEL - #define TUD_RNDIS_ITF_PROTOCOL CDC_COMM_PROTOCOL_MICROSOFT_RNDIS + #define TUD_RNDIS_ITF_PROTOCOL 0xFF /* CDC_COMM_PROTOCOL_MICROSOFT_RNDIS */ #else /* Windows 7+ */ - #define TUD_RNDIS_ITF_CLASS 0xE0 + #define TUD_RNDIS_ITF_CLASS TUSB_CLASS_WIRELESS_CONTROLLER #define TUD_RNDIS_ITF_SUBCLASS 0x01 #define TUD_RNDIS_ITF_PROTOCOL 0x03 #endif @@ -408,22 +412,6 @@ TU_ATTR_WEAK bool tud_vendor_control_complete_cb(uint8_t rhport, tusb_control_re 7, TUSB_DESC_ENDPOINT, _epout, TUSB_XFER_BULK, U16_TO_U8S_LE(_epsize), 0 -//------------- CDC-EEM -------------// - -// Length of template descriptor: 23 bytes -#define TUD_CDC_EEM_DESC_LEN (9+7+7) - -// CDC-EEM Descriptor Template -// Interface number, description string index, EP data address (out, in) and size. -#define TUD_CDC_EEM_DESCRIPTOR(_itfnum, _stridx, _epout, _epin, _epsize) \ - /* EEM Interface */\ - 9, TUSB_DESC_INTERFACE, _itfnum, 0, 2, TUSB_CLASS_CDC, CDC_COMM_SUBCLASS_ETHERNET_EMULATION_MODEL, CDC_COMM_PROTOCOL_ETHERNET_EMULATION_MODEL, _stridx,\ - /* Endpoint In */\ - 7, TUSB_DESC_ENDPOINT, _epin, TUSB_XFER_BULK, U16_TO_U8S_LE(_epsize), 0,\ - /* Endpoint Out */\ - 7, TUSB_DESC_ENDPOINT, _epout, TUSB_XFER_BULK, U16_TO_U8S_LE(_epsize), 0 - - #ifdef __cplusplus } #endif diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index b9947044b..26b9700e8 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -38,6 +38,7 @@ //--------------------------------------------------------------------+ //bool usbd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc); +void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr); // Submit a usb transfer bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes); |
