summaryrefslogtreecommitdiff
path: root/src/device
diff options
context:
space:
mode:
authorHa Thach <[email protected]>2022-05-31 22:25:14 +0700
committerGitHub <[email protected]>2022-05-31 22:25:14 +0700
commitfdeac8508be5cdd95966422d1e776604efbc9b3f (patch)
treee3e1ddf37ebd5500145ac610239f2d5baeceb6fa /src/device
parentab7c23a787a024dcaadb698c9d7533ad85209cd7 (diff)
parente384d16d576089daa3a5c993ead06cffb7a50cbe (diff)
Merge pull request #1381 from hathach/add-sof-isr
Add SOF IRQ Handler
Diffstat (limited to 'src/device')
-rw-r--r--src/device/dcd.h15
-rw-r--r--src/device/usbd.c71
-rw-r--r--src/device/usbd.h6
-rw-r--r--src/device/usbd_pvt.h5
4 files changed, 73 insertions, 24 deletions
diff --git a/src/device/dcd.h b/src/device/dcd.h
index bc68c9be6..6b99734fe 100644
--- a/src/device/dcd.h
+++ b/src/device/dcd.h
@@ -77,6 +77,11 @@ typedef struct TU_ATTR_ALIGNED(4)
tusb_speed_t speed;
} bus_reset;
+ // SOF
+ struct {
+ uint32_t frame_count;
+ }sof;
+
// SETUP_RECEIVED
tusb_control_request_t setup_received;
@@ -132,6 +137,9 @@ void dcd_connect(uint8_t rhport) TU_ATTR_WEAK;
// Disconnect by disabling internal pull-up resistor on D+/D-
void dcd_disconnect(uint8_t rhport) TU_ATTR_WEAK;
+// Enable/Disable Start-of-frame interrupt. Default is disabled
+void dcd_sof_enable(uint8_t rhport, bool en);
+
//--------------------------------------------------------------------+
// Endpoint API
//--------------------------------------------------------------------+
@@ -209,6 +217,13 @@ TU_ATTR_ALWAYS_INLINE static inline void dcd_event_xfer_complete (uint8_t rhport
dcd_event_handler(&event, in_isr);
}
+static inline void dcd_event_sof(uint8_t rhport, uint32_t frame_count, bool in_isr)
+{
+ dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SOF };
+ event.sof.frame_count = frame_count;
+ dcd_event_handler(&event, in_isr);
+}
+
#ifdef __cplusplus
}
#endif
diff --git a/src/device/usbd.c b/src/device/usbd.c
index 1dd1a352e..fa75c0214 100644
--- a/src/device/usbd.c
+++ b/src/device/usbd.c
@@ -69,7 +69,7 @@ typedef struct
volatile uint8_t cfg_num; // current active configuration (0x00 is not configured)
uint8_t speed;
- uint8_t itf2drv[16]; // map interface number to driver (0xff is invalid)
+ uint8_t itf2drv[CFG_TUD_INTERFACE_MAX]; // map interface number to driver (0xff is invalid)
uint8_t ep2drv[CFG_TUD_ENDPPOINT_MAX][2]; // map endpoint to driver ( 0xff is invalid ), can use only 4-bit each
tu_edpt_state_t ep_status[CFG_TUD_ENDPPOINT_MAX][2];
@@ -98,7 +98,7 @@ static usbd_class_driver_t const _usbd_driver[] =
.open = cdcd_open,
.control_xfer_cb = cdcd_control_xfer_cb,
.xfer_cb = cdcd_xfer_cb,
- .sof = NULL
+ .sof_isr = NULL
},
#endif
@@ -110,7 +110,7 @@ static usbd_class_driver_t const _usbd_driver[] =
.open = mscd_open,
.control_xfer_cb = mscd_control_xfer_cb,
.xfer_cb = mscd_xfer_cb,
- .sof = NULL
+ .sof_isr = NULL
},
#endif
@@ -122,7 +122,7 @@ static usbd_class_driver_t const _usbd_driver[] =
.open = hidd_open,
.control_xfer_cb = hidd_control_xfer_cb,
.xfer_cb = hidd_xfer_cb,
- .sof = NULL
+ .sof_isr = NULL
},
#endif
@@ -134,7 +134,7 @@ static usbd_class_driver_t const _usbd_driver[] =
.open = audiod_open,
.control_xfer_cb = audiod_control_xfer_cb,
.xfer_cb = audiod_xfer_cb,
- .sof = NULL
+ .sof_isr = audiod_sof_isr
},
#endif
@@ -146,7 +146,7 @@ static usbd_class_driver_t const _usbd_driver[] =
.open = videod_open,
.control_xfer_cb = videod_control_xfer_cb,
.xfer_cb = videod_xfer_cb,
- .sof = NULL
+ .sof_isr = NULL
},
#endif
@@ -158,7 +158,7 @@ static usbd_class_driver_t const _usbd_driver[] =
.reset = midid_reset,
.control_xfer_cb = midid_control_xfer_cb,
.xfer_cb = midid_xfer_cb,
- .sof = NULL
+ .sof_isr = NULL
},
#endif
@@ -170,7 +170,7 @@ static usbd_class_driver_t const _usbd_driver[] =
.open = vendord_open,
.control_xfer_cb = tud_vendor_control_xfer_cb,
.xfer_cb = vendord_xfer_cb,
- .sof = NULL
+ .sof_isr = NULL
},
#endif
@@ -182,7 +182,7 @@ static usbd_class_driver_t const _usbd_driver[] =
.open = usbtmcd_open_cb,
.control_xfer_cb = usbtmcd_control_xfer_cb,
.xfer_cb = usbtmcd_xfer_cb,
- .sof = NULL
+ .sof_isr = NULL
},
#endif
@@ -194,7 +194,7 @@ static usbd_class_driver_t const _usbd_driver[] =
.open = dfu_rtd_open,
.control_xfer_cb = dfu_rtd_control_xfer_cb,
.xfer_cb = NULL,
- .sof = NULL
+ .sof_isr = NULL
},
#endif
@@ -206,7 +206,7 @@ static usbd_class_driver_t const _usbd_driver[] =
.open = dfu_moded_open,
.control_xfer_cb = dfu_moded_control_xfer_cb,
.xfer_cb = NULL,
- .sof = NULL
+ .sof_isr = NULL
},
#endif
@@ -218,7 +218,7 @@ static usbd_class_driver_t const _usbd_driver[] =
.open = netd_open,
.control_xfer_cb = netd_control_xfer_cb,
.xfer_cb = netd_xfer_cb,
- .sof = NULL,
+ .sof_isr = NULL,
},
#endif
@@ -230,7 +230,7 @@ static usbd_class_driver_t const _usbd_driver[] =
.open = btd_open,
.control_xfer_cb = btd_control_xfer_cb,
.xfer_cb = btd_xfer_cb,
- .sof = NULL
+ .sof_isr = NULL
},
#endif
};
@@ -264,6 +264,8 @@ static inline usbd_class_driver_t const * get_driver(uint8_t drvid)
// DCD Event
//--------------------------------------------------------------------+
+//static tud_sof_isr_t _sof_isr = NULL;
+
enum { RHPORT_INVALID = 0xFFu };
static uint8_t _usbd_rhport = RHPORT_INVALID;
@@ -371,6 +373,12 @@ bool tud_connect(void)
return true;
}
+//void tud_sof_isr_set(tud_sof_isr_t sof_isr)
+//{
+// _sof_isr = sof_isr;
+// dcd_sof_enable(_usbd_rhport, _sof_isr != NULL);
+//}
+
//--------------------------------------------------------------------+
// USBD Task
//--------------------------------------------------------------------+
@@ -413,11 +421,13 @@ bool tud_init (uint8_t rhport)
driver->init();
}
+ _usbd_rhport = rhport;
+ //_sof_isr = NULL;
+
// Init device controller driver
dcd_init(rhport);
dcd_int_enable(rhport);
- _usbd_rhport = rhport;
return true;
}
@@ -576,20 +586,12 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr)
}
break;
- case DCD_EVENT_SOF:
- TU_LOG2("\r\n");
- for ( uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++ )
- {
- usbd_class_driver_t const * driver = get_driver(i);
- if ( driver->sof ) driver->sof(event.rhport);
- }
- break;
-
case USBD_EVENT_FUNC_CALL:
TU_LOG2("\r\n");
if ( event.func_call.func ) event.func_call.func(event.func_call.param);
break;
+ case DCD_EVENT_SOF:
default:
TU_BREAKPOINT();
break;
@@ -1105,14 +1107,30 @@ TU_ATTR_FAST_FUNC void dcd_event_handler(dcd_event_t const * event, bool in_isr)
break;
case DCD_EVENT_SOF:
+ // SOF driver handler in ISR context
+ for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++)
+ {
+ usbd_class_driver_t const * driver = get_driver(i);
+ if (driver->sof_isr)
+ {
+ driver->sof_isr(event->rhport, event->sof.frame_count);
+ }
+ }
+
+ // SOF user handler in ISR context
+ // if (_sof_isr) _sof_isr(event->sof.frame_count);
+
// Some MCUs after running dcd_remote_wakeup() does not have way to detect the end of remote wakeup
// which last 1-15 ms. DCD can use SOF as a clear indicator that bus is back to operational
if ( _usbd_dev.suspended )
{
_usbd_dev.suspended = 0;
+
dcd_event_t const event_resume = { .rhport = event->rhport, .event_id = DCD_EVENT_RESUME };
osal_queue_send(_usbd_q, &event_resume, in_isr);
}
+
+ // skip osal queue for SOF in usbd task
break;
default:
@@ -1357,4 +1375,11 @@ void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr)
return;
}
+void usbd_sof_enable(uint8_t rhport, bool en)
+{
+ // TODO: Check needed if all drivers including the user sof_cb does not need an active SOF ISR any more.
+ // Only if all drivers switched off SOF calls the SOF interrupt may be disabled
+ dcd_sof_enable(rhport, en);
+}
+
#endif
diff --git a/src/device/usbd.h b/src/device/usbd.h
index 964cfb992..f1312f6ec 100644
--- a/src/device/usbd.h
+++ b/src/device/usbd.h
@@ -33,6 +33,8 @@
extern "C" {
#endif
+// typedef void (*tud_sof_isr_t) (uint32_t frame_count);
+
//--------------------------------------------------------------------+
// Application API
//--------------------------------------------------------------------+
@@ -93,6 +95,10 @@ bool tud_disconnect(void);
// Return false on unsupported MCUs
bool tud_connect(void);
+// Set Start-of-frame (1ms interval) IRQ handler
+// NULL means disabled, frame_count may not be supported on mcus
+// void tud_sof_isr_set(tud_sof_isr_t sof_isr);
+
// Carry out Data and Status stage of control transfer
// - If len = 0, it is equivalent to sending status only
// - If len > wLength : it will be truncated
diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h
index 29753451e..603ffc936 100644
--- a/src/device/usbd_pvt.h
+++ b/src/device/usbd_pvt.h
@@ -48,7 +48,7 @@ typedef struct
uint16_t (* open ) (uint8_t rhport, tusb_desc_interface_t const * desc_intf, uint16_t max_len);
bool (* control_xfer_cb ) (uint8_t rhport, uint8_t stage, tusb_control_request_t const * request);
bool (* xfer_cb ) (uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes);
- void (* sof ) (uint8_t rhport); /* optional */
+ void (* sof_isr ) (uint8_t rhport, uint32_t frame_count); // optional
} usbd_class_driver_t;
// Invoked when initializing device stack to get additional class drivers.
@@ -102,6 +102,9 @@ bool usbd_edpt_ready(uint8_t rhport, uint8_t ep_addr)
return !usbd_edpt_busy(rhport, ep_addr) && !usbd_edpt_stalled(rhport, ep_addr);
}
+// Enable SOF interrupt
+void usbd_sof_enable(uint8_t rhport, bool en);
+
/*------------------------------------------------------------------*/
/* Helper
*------------------------------------------------------------------*/