stm32fsdev: Implement dcd_connect.

2 files changed, 32 insertions, 6 deletions

diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
index f962a4bee..b893ec05a 100644
--- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
+++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
@@ -239,17 +239,29 @@ void dcd_init (uint8_t rhport)
   }
   USB->CNTR |= USB_CNTR_RESETM | USB_CNTR_SOFM | USB_CNTR_ESOFM | USB_CNTR_CTRM | USB_CNTR_SUSPM | USB_CNTR_WKUPM;
   dcd_handle_bus_reset();
+  
+  // Data-line pull-up is left disconnected.
+}
 
-  // And finally enable pull-up, which may trigger the RESET IRQ if the host is connected.
-  // (if this MCU has an internal pullup)
+// Define only on MCU with internal pull-up so BSP can override (needed on MCU without internal pull-up)
 #if defined(USB_BCDR_DPPU)
-  USB->BCDR |= USB_BCDR_DPPU;
-#else
-  // FIXME: callback to the user to ask them to twiddle a GPIO to disable/enable D+???
-#endif
 
+TU_ATTR_WEAK
+void dcd_disconnect(uint8_t rhport)
+{
+  (void) rhport;
+  USB->BCDR &= ~(USB_BCDR_DPPU);
+}
+
+TU_ATTR_WEAK
+void dcd_connect(uint8_t rhport)
+{
+  (void) rhport;
+  USB->BCDR |= USB_BCDR_DPPU;
 }
 
+#endif
+
 // Enable device interrupt
 void dcd_int_enable (uint8_t rhport)
 {
diff --git a/src/portable/template/dcd_template.c b/src/portable/template/dcd_template.c
index 102910509..d29c98e55 100644
--- a/src/portable/template/dcd_template.c
+++ b/src/portable/template/dcd_template.c
@@ -45,6 +45,20 @@ void dcd_init (uint8_t rhport)
   (void) rhport;
 }
 
+#if HAS_INTERNAL_PULLUP
+// Enable internal D+/D- pullup
+void dcd_connect(uint8_t rhport) TU_ATTR_WEAK
+{
+  (void) rhport;
+}
+
+// Disable internal D+/D- pullup
+void dcd_disconnect(uint8_t rhport) TU_ATTR_WEAK
+{
+  (void) rhport;
+}
+#endif
+
 // Enable device interrupt
 void dcd_int_enable (uint8_t rhport)
 {