Merge branch 'hathach:master' into threadx_osal

1 files changed, 84 insertions, 48 deletions

diff --git a/src/tusb_option.h b/src/tusb_option.h
index 08bf0ebc5..1e4d8ef4a 100644
--- a/src/tusb_option.h
+++ b/src/tusb_option.h
@@ -216,6 +216,7 @@
 #define OPT_MCU_AT32F402_405     2504  ///< ArteryTek AT32F402_405
 #define OPT_MCU_AT32F425         2505  ///< ArteryTek AT32F425
 #define OPT_MCU_AT32F413         2506  ///< ArteryTek AT32F413
+#define OPT_MCU_AT32F45X         2507  ///< ArteryTek AT32F45x
 
 // HPMicro
 #define OPT_MCU_HPM              2600  ///< HPMicro
@@ -272,17 +273,27 @@
 // USBIP
 //--------------------------------------------------------------------+
 
-//------------- DWC2 -------------//
-// Slave mode for device
-#ifndef CFG_TUD_DWC2_SLAVE_ENABLE
-  #ifndef CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT
-    #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT 1
+//------------- ChipIdea -------------//
+// Enable CI_HS VBUS Charge. Set this to 1 if the USB_VBUS pin is not connected to 5V VBUS (note: 3.3V is
+// insufficient).
+#ifndef CFG_TUD_CI_HS_VBUS_CHARGE
+  #ifndef CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT
+    #define CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT 0
   #endif
+  #define CFG_TUD_CI_HS_VBUS_CHARGE CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT
+#endif
 
-  #define CFG_TUD_DWC2_SLAVE_ENABLE CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT
+// CI_HS support FIFO transfer if endpoint buffer is 4k aligned and size is multiple of 4k, also DCACHE is disabled
+#ifndef CFG_TUD_CI_HS_EPBUF_4K_ALIGNED
+  #define CFG_TUD_CI_HS_EPBUF_4K_ALIGNED 0
+#endif
+
+#if CFG_TUD_CI_HS_EPBUF_4K_ALIGNED && !CFG_TUD_MEM_DCACHE_ENABLE
+  #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1
 #endif
 
-// DMA for device
+//------------- DWC2 -------------//
+// DMA mode for device
 #ifndef CFG_TUD_DWC2_DMA_ENABLE
   #ifndef CFG_TUD_DWC2_DMA_ENABLE_DEFAULT
   #define CFG_TUD_DWC2_DMA_ENABLE_DEFAULT 0
@@ -291,16 +302,16 @@
   #define CFG_TUD_DWC2_DMA_ENABLE CFG_TUD_DWC2_DMA_ENABLE_DEFAULT
 #endif
 
-// Slave mode for host
-#ifndef CFG_TUH_DWC2_SLAVE_ENABLE
-  #ifndef CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT
-    #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT 1
+// Slave mode for device
+#ifndef CFG_TUD_DWC2_SLAVE_ENABLE
+  #ifndef CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT
+    #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUD_DWC2_DMA_ENABLE // disabled if DMA is enabled
   #endif
 
-  #define CFG_TUH_DWC2_SLAVE_ENABLE CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT
+  #define CFG_TUD_DWC2_SLAVE_ENABLE CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT
 #endif
 
-// DMA for host
+// DMA mode for host
 #ifndef CFG_TUH_DWC2_DMA_ENABLE
   #ifndef CFG_TUH_DWC2_DMA_ENABLE_DEFAULT
     #define CFG_TUH_DWC2_DMA_ENABLE_DEFAULT 0
@@ -309,36 +320,55 @@
   #define CFG_TUH_DWC2_DMA_ENABLE CFG_TUH_DWC2_DMA_ENABLE_DEFAULT
 #endif
 
-#if defined(TUP_USBIP_DWC2)
-  #if CFG_TUD_DWC2_SLAVE_ENABLE && !CFG_TUD_DWC2_DMA_ENABLE
-    #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1
+// Slave mode for host
+#ifndef CFG_TUH_DWC2_SLAVE_ENABLE
+  #ifndef CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT
+    #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUH_DWC2_DMA_ENABLE // disabled if DMA is enabled
   #endif
 
-  #if CFG_TUH_DWC2_SLAVE_ENABLE && !CFG_TUH_DWC2_DMA_ENABLE
-    #define CFG_TUH_EDPT_DEDICATED_HWFIFO 1
-  #endif
+  #define CFG_TUH_DWC2_SLAVE_ENABLE CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT
 #endif
 
-//------------- ChipIdea -------------//
-// Enable CI_HS VBUS Charge. Set this to 1 if the USB_VBUS pin is not connected to 5V VBUS (note: 3.3V is
-// insufficient).
-#ifndef CFG_TUD_CI_HS_VBUS_CHARGE
-  #ifndef CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT
-    #define CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT 0
+#if defined(TUP_USBIP_DWC2)
+  #define CFG_TUD_EDPT_DEDICATED_HWFIFO    CFG_TUD_DWC2_SLAVE_ENABLE
+  #define CFG_TUH_EDPT_DEDICATED_HWFIFO    CFG_TUH_DWC2_SLAVE_ENABLE
+
+  #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 4 // 32bit access
+  #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 // fixed hwfifo address
+#endif
+
+//------------ FSDEV --------------//
+#if defined(TUP_USBIP_FSDEV)
+  #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1
+
+  #if CFG_TUSB_FSDEV_PMA_SIZE == 2048 || TU_CHECK_MCU(OPT_MCU_STM32U0)
+    #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 4 // 32-bit data
+    #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 4 // 32-bit address increase
+  #elif CFG_TUSB_FSDEV_PMA_SIZE == 1024
+    #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data
+    #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 2 // 16-bit address increase
+  #elif CFG_TUSB_FSDEV_PMA_SIZE == 512
+    #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data
+    #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 4 // 32-bit address increase
   #endif
-  #define CFG_TUD_CI_HS_VBUS_CHARGE CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT
 #endif
 
-// CI_HS support FIFO transfer if endpoint buffer is 4k aligned and size is multiple of 4k, also DCACHE is disabled
-#ifndef CFG_TUD_CI_HS_EPBUF_4K_ALIGNED
-  #define CFG_TUD_CI_HS_EPBUF_4K_ALIGNED 0
+//------------ MAX3421 -------------//
+// Enable MAX3421 USB host controller
+#ifndef CFG_TUH_MAX3421
+  #define CFG_TUH_MAX3421 0
 #endif
 
-#if CFG_TUD_CI_HS_EPBUF_4K_ALIGNED && !CFG_TUD_MEM_DCACHE_ENABLE
-  #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1
+//------------ MUSB --------------//
+#if defined(TUP_USBIP_MUSB)
+  #define CFG_TUD_EDPT_DEDICATED_HWFIFO              1
+  #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE           4 // 32 bit data
+  #define CFG_TUSB_FIFO_HWFIFO_DATA_ODD_16BIT_ACCESS   // allow odd 16bit access
+  #define CFG_TUSB_FIFO_HWFIFO_DATA_ODD_8BIT_ACCESS    // allow odd 8bit access
+  #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE           0 // fixed hwfifo
 #endif
 
-//------------- pio-usb -------------//
+//------------- Raspberry Pi -------------//
 // Enable PIO-USB software host controller
 #ifndef CFG_TUH_RPI_PIO_USB
   #define CFG_TUH_RPI_PIO_USB 0
@@ -348,25 +378,21 @@
   #define CFG_TUD_RPI_PIO_USB 0
 #endif
 
-//------------ MAX3421 -------------//
-// Enable MAX3421 USB host controller
-#ifndef CFG_TUH_MAX3421
-  #define CFG_TUH_MAX3421  0
-#endif
-
-//------------ FSDEV --------------//
-#if defined(TUP_USBIP_FSDEV)
-  #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1
-#endif
-
-//------------ MUSB --------------//
-#if defined(TUP_USBIP_MUSB)
-  #define CFG_TUD_EDPT_DEDICATED_HWFIFO 0 // need testing to enable
+#if (CFG_TUSB_MCU == OPT_MCU_RP2040) && !CFG_TUD_RPI_PIO_USB
+  #define CFG_TUD_EDPT_DEDICATED_HWFIFO    1
+  #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 1
+  #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 1
+  #define CFG_TUSB_FIFO_HWFIFO_CUSTOM_WRITE
+  #define CFG_TUSB_FIFO_HWFIFO_CUSTOM_READ
 #endif
 
 //------------ RUSB2 --------------//
 #if defined(TUP_USBIP_RUSB2)
-  #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1
+  #define CFG_TUD_EDPT_DEDICATED_HWFIFO     1
+  #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE  (2 | (TUD_OPT_HIGH_SPEED ? 4 : 0)) // 16 bit and 32 bit if highspeed
+  #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE  0
+  #define CFG_TUSB_FIFO_HWFIFO_CUSTOM_WRITE // custom write since rusb2 can change access width 32 -> 16 and can write
+                                            // odd byte with byte access
 #endif
 
 //--------------------------------------------------------------------
@@ -535,6 +561,11 @@
   #define CFG_TUD_INTERFACE_MAX   16
 #endif
 
+// max events processed in one tud_task_ext() call, 0 for unlimited
+#ifndef CFG_TUD_TASK_EVENTS_PER_RUN
+  #define CFG_TUD_TASK_EVENTS_PER_RUN  16
+#endif
+
 // default to max hardware endpoint, but can be smaller to save RAM
 #ifndef CFG_TUD_ENDPPOINT_MAX
   #define CFG_TUD_ENDPPOINT_MAX   TUP_DCD_ENDPOINT_MAX
@@ -654,6 +685,11 @@
   #define CFG_TUH_MEM_DCACHE_LINE_SIZE CFG_TUSB_MEM_DCACHE_LINE_SIZE
 #endif
 
+// max events processed in one tuh_task_ext() call, 0 for unlimited
+#ifndef CFG_TUH_TASK_EVENTS_PER_RUN
+  #define CFG_TUH_TASK_EVENTS_PER_RUN  16
+#endif
+
 //------------- CLASS -------------//
 
 #ifndef CFG_TUH_HUB
@@ -725,7 +761,7 @@
   #define CFG_TUH_CDC_PL2303 0
 #endif
 
-#ifndef CFG_TUH_CDC_PL2303_VID_PID_QUIRKS_LIST
+#ifndef CFG_TUH_CDC_PL2303_VID_PID_LIST
   // List of product IDs that can use the PL2303 CDC driver
   #define CFG_TUH_CDC_PL2303_VID_PID_LIST \
   { 0x067b, 0x2303 }, /* initial 2303 */ \