Merge pull request #3568 from hathach/copilot/upgrade-net-lwip-webserver-descriptors

net: replace CFG_TUD_NET_ENDPOINT_SIZE with actual descriptor-based ep size

4 files changed, 14 insertions, 11 deletions

diff --git a/src/class/net/ecm_rndis_device.c b/src/class/net/ecm_rndis_device.c
index 9282e0605..b27cac3ea 100644
--- a/src/class/net/ecm_rndis_device.c
+++ b/src/class/net/ecm_rndis_device.c
@@ -48,9 +48,10 @@ typedef struct {
   uint8_t itf_num;      // Index number of Management Interface, +1 for Data Interface
   uint8_t itf_data_alt; // Alternate setting of Data Interface. 0 : inactive, 1 : active
 
-  uint8_t ep_notif;
   uint8_t ep_in;
   uint8_t ep_out;
+  uint16_t ep_size;     // bulk endpoint max packet size (IN and OUT assumed equal)
+  uint8_t ep_notif;
 
   bool ecm_mode;
 
@@ -176,6 +177,9 @@ uint16_t netd_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uint1
   // Pair of endpoints
   TU_ASSERT(TUSB_DESC_ENDPOINT == tu_desc_type(p_desc), 0);
 
+  // Save the actual bulk endpoint size (IN and OUT assumed equal)
+  _netd_itf.ep_size = tu_edpt_packet_size((tusb_desc_endpoint_t const *) p_desc);
+
   if (_netd_itf.ecm_mode) {
     // ECM by default is in-active, save the endpoint attribute
     // to open later when received setInterface
@@ -357,8 +361,7 @@ bool netd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_
   /* data transmission finished */
   if (ep_addr == _netd_itf.ep_in) {
     /* TinyUSB requires the class driver to implement ZLP (since ZLP usage is class-specific) */
-
-    if (xferred_bytes && (0 == (xferred_bytes % CFG_TUD_NET_ENDPOINT_SIZE))) {
+    if (xferred_bytes > 0 && 0 == (xferred_bytes & (_netd_itf.ep_size-1))) {
       do_in_xfer(NULL, 0); /* a ZLP is needed */
     } else {
       /* we're finally finished */
diff --git a/src/class/net/ncm_device.c b/src/class/net/ncm_device.c
index 405e4467b..1327dbaf2 100644
--- a/src/class/net/ncm_device.c
+++ b/src/class/net/ncm_device.c
@@ -83,6 +83,7 @@ typedef struct {
   uint8_t itf_num;      // interface number
   uint8_t itf_data_alt; // ==0 -> no endpoints, i.e. no network traffic, ==1 -> normal operation with two endpoints (spec, chapter 5.3)
   uint8_t rhport;       // storage of \a rhport because some callbacks are done without it
+  uint16_t ep_size;     // bulk endpoint max packet size (IN and OUT assumed equal)
 
   // recv handling
   recv_ntb_t *recv_free_ntb[RECV_NTB_N];                // free list of recv NTBs
@@ -340,7 +341,8 @@ static xmit_ntb_t *xmit_get_next_ready_ntb(void) {
 static bool xmit_insert_required_zlp(uint8_t rhport, uint32_t xferred_bytes) {
   TU_LOG_DRV("xmit_insert_required_zlp(%d,%ld)\n", rhport, xferred_bytes);
 
-  if (xferred_bytes == 0 || xferred_bytes % CFG_TUD_NET_ENDPOINT_SIZE != 0) {
+  uint16_t const ep_size = ncm_interface.ep_size;
+  if (xferred_bytes == 0 || (xferred_bytes & (ep_size-1)) != 0) {
     return false;
   }
 
@@ -905,6 +907,7 @@ uint16_t netd_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint16
   // a TUSB_DESC_ENDPOINT (actually two) must follow, open these endpoints
   TU_ASSERT(tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT, 0);
   TU_ASSERT(usbd_open_edpt_pair(rhport, p_desc, 2, TUSB_XFER_BULK, &ncm_interface.ep_out, &ncm_interface.ep_in));
+  ncm_interface.ep_size = tu_edpt_packet_size((tusb_desc_endpoint_t const *) p_desc);
   drv_len += 2 * sizeof(tusb_desc_endpoint_t);
 
   return drv_len;
diff --git a/src/class/net/net_device.h b/src/class/net/net_device.h
index 96c03fd61..849f8a2f9 100644
--- a/src/class/net/net_device.h
+++ b/src/class/net/net_device.h
@@ -35,9 +35,6 @@
 #error "Cannot enable both ECM_RNDIS and NCM network drivers"
 #endif
 
-/* declared here, NOT in usb_descriptors.c, so that the driver can intelligently ZLP as needed */
-#define CFG_TUD_NET_ENDPOINT_SIZE (TUD_OPT_HIGH_SPEED ? 512 : 64)
-
 /* Maximum Transmission Unit (in bytes) of the network, including Ethernet header */
 #ifndef CFG_TUD_NET_MTU
 #define CFG_TUD_NET_MTU           1514
diff --git a/src/device/usbd.h b/src/device/usbd.h
index d3a6dccbb..93fb588df 100644
--- a/src/device/usbd.h
+++ b/src/device/usbd.h
@@ -1026,9 +1026,9 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ
 // Length of template descriptor
 #define TUD_CDC_NCM_DESC_LEN  (8+9+5+5+13+6+7+9+9+7+7)
 
-// CDC-ECM Descriptor Template
-// Interface number, description string index, MAC address string index, EP notification address and size, EP data address (out, in), and size, max segment size.
-#define TUD_CDC_NCM_DESCRIPTOR(_itfnum, _desc_stridx, _mac_stridx, _ep_notif, _ep_notif_size, _epout, _epin, _epsize, _maxsegmentsize) \
+// CDC-NCM Descriptor Template
+// Interface number, description string index, MAC address string index, EP notification address and size, EP data address (out, in), size, max segment size, EP notification bInterval.
+#define TUD_CDC_NCM_DESCRIPTOR(_itfnum, _desc_stridx, _mac_stridx, _ep_notif, _ep_notif_size, _epout, _epin, _epsize, _maxsegmentsize, _ep_notif_interval) \
   /* Interface Association */\
   8, TUSB_DESC_INTERFACE_ASSOCIATION, _itfnum, 2, TUSB_CLASS_CDC, CDC_COMM_SUBCLASS_NETWORK_CONTROL_MODEL, 0, 0,\
   /* CDC Control Interface */\
@@ -1042,7 +1042,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ
   /* CDC-NCM Functional Descriptor */\
   6, TUSB_DESC_CS_INTERFACE, CDC_FUNC_DESC_NCM, U16_TO_U8S_LE(0x0100), 0, \
   /* Endpoint Notification */\
-  7, TUSB_DESC_ENDPOINT, _ep_notif, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(_ep_notif_size), 50,\
+  7, TUSB_DESC_ENDPOINT, _ep_notif, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(_ep_notif_size), _ep_notif_interval,\
   /* CDC Data Interface (default inactive) */\
   9, TUSB_DESC_INTERFACE, (uint8_t)((_itfnum)+1), 0, 0, TUSB_CLASS_CDC_DATA, 0, NCM_DATA_PROTOCOL_NETWORK_TRANSFER_BLOCK, 0,\
   /* CDC Data Interface (alternative active) */\