update bcm dcd

3 files changed, 11 insertions, 11 deletions

diff --git a/src/device/dcd_attr.h b/src/device/dcd_attr.h
index 61f31e38a..90f3a526a 100644
--- a/src/device/dcd_attr.h
+++ b/src/device/dcd_attr.h
@@ -181,7 +181,7 @@
   #define DCD_ATTR_ENDPOINT_MAX   4
 
 //------------- Broadcom -------------//
-#elif TU_CHECK_MCU(BCM2711)
+#elif TU_CHECK_MCU(OPT_MCU_BCM2711)
   #define DCD_ATTR_ENDPOINT_MAX   8
 
 #else
diff --git a/src/portable/broadcom/synopsys/dcd_synopsys.c b/src/portable/broadcom/synopsys/dcd_synopsys.c
index 87150f683..041158871 100644
--- a/src/portable/broadcom/synopsys/dcd_synopsys.c
+++ b/src/portable/broadcom/synopsys/dcd_synopsys.c
@@ -37,9 +37,9 @@
 // We disable SOF for now until needed later on
 #define USE_SOF     0
 
-#if TUSB_OPT_DEVICE_ENABLED &&                                          \
-    ( (CFG_TUSB_MCU == OPT_MCU_BCM2711 )                           \
-    )
+#if TUSB_OPT_DEVICE_ENABLED &&         \
+    (CFG_TUSB_MCU == OPT_MCU_BCM2711 ) \
+
 
 // EP_MAX       : Max number of bi-directional endpoints including EP0
 // EP_FIFO_SIZE : Size of dedicated USB SRAM
@@ -656,10 +656,10 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
   TU_ASSERT(epnum < EP_MAX);
 
   xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir);
-  xfer->max_size = desc_edpt->wMaxPacketSize.size;
+  xfer->max_size = tu_edpt_packet_size(desc_edpt);
   xfer->interval = desc_edpt->bInterval;
 
-  uint16_t const fifo_size = (desc_edpt->wMaxPacketSize.size + 3) / 4; // Round up to next full word
+  uint16_t const fifo_size = (xfer->max_size + 3) / 4; // Round up to next full word
 
   if(dir == TUSB_DIR_OUT)
   {
@@ -678,7 +678,7 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
     out_ep[epnum].DOEPCTL |= (1 << USB_OTG_DOEPCTL_USBAEP_Pos)        |
         (desc_edpt->bmAttributes.xfer << USB_OTG_DOEPCTL_EPTYP_Pos)   |
         (desc_edpt->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS ? USB_OTG_DOEPCTL_SD0PID_SEVNFRM : 0) |
-        (desc_edpt->wMaxPacketSize.size << USB_OTG_DOEPCTL_MPSIZ_Pos);
+        (xfer->max_size << USB_OTG_DOEPCTL_MPSIZ_Pos);
 
     dev->DAINTMSK |= (1 << (USB_OTG_DAINTMSK_OEPM_Pos + epnum));
   }
@@ -720,7 +720,7 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
         (epnum << USB_OTG_DIEPCTL_TXFNUM_Pos) |
         (desc_edpt->bmAttributes.xfer << USB_OTG_DIEPCTL_EPTYP_Pos) |
         (desc_edpt->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS ? USB_OTG_DIEPCTL_SD0PID_SEVNFRM : 0) |
-        (desc_edpt->wMaxPacketSize.size << USB_OTG_DIEPCTL_MPSIZ_Pos);
+        (xfer->max_size << USB_OTG_DIEPCTL_MPSIZ_Pos);
 
     dev->DAINTMSK |= (1 << (USB_OTG_DAINTMSK_IEPM_Pos + epnum));
   }
@@ -1010,7 +1010,7 @@ static void handle_rxflvl_ints(uint8_t rhport, USB_OTG_OUTEndpointTypeDef * out_
       if (xfer->ff)
       {
         // Ring buffer
-        tu_fifo_write_n_const_addr_full_words(xfer->ff, (const void *) rx_fifo, bcnt);
+        tu_fifo_write_n_const_addr_full_words(xfer->ff, (const void *)(uintptr_t) rx_fifo, bcnt);
       }
       else
       {
@@ -1130,7 +1130,7 @@ static void handle_epin_ints(uint8_t rhport, USB_OTG_DeviceTypeDef * dev, USB_OT
           if (xfer->ff)
           {
             usb_fifo_t tx_fifo = FIFO_BASE(rhport, n);
-            tu_fifo_read_n_const_addr_full_words(xfer->ff, (void *) tx_fifo, packet_size);
+            tu_fifo_read_n_const_addr_full_words(xfer->ff, (void *)(uintptr_t) tx_fifo, packet_size);
           }
           else
           {
diff --git a/src/portable/st/synopsys/dcd_synopsys.c b/src/portable/st/synopsys/dcd_synopsys.c
index 4e2bbd076..4782ead8c 100644
--- a/src/portable/st/synopsys/dcd_synopsys.c
+++ b/src/portable/st/synopsys/dcd_synopsys.c
@@ -370,7 +370,7 @@ static bool USB_HS_PHYCInit(void)
 {
   USB_HS_PHYC_GlobalTypeDef *usb_hs_phyc = (USB_HS_PHYC_GlobalTypeDef*) USB_HS_PHYC_CONTROLLER_BASE;
 
-  // Enable LDO
+  // Enable LDO: Note STM32F72/3xx Reference Manual rev 3 June 2018 incorrectly defined this bit as Disabled !!
   usb_hs_phyc->USB_HS_PHYC_LDO |= USB_HS_PHYC_LDO_ENABLE;
 
   // Wait until LDO ready