diff options
| author | MasterPhi <[email protected]> | 2021-06-15 21:34:42 +0200 |
|---|---|---|
| committer | MasterPhi <[email protected]> | 2021-06-15 21:52:14 +0200 |
| commit | 67a6560ec9f379418cccc312ee09bb021e464716 (patch) | |
| tree | 980be42f0d4df6777ecbca9426f4f72d8f96a990 /src | |
| parent | 6cc702e9ece9bbf32ac9ad4283407b4937c671a9 (diff) | |
Default use dual bank for FS, use dcd irq switch.
Diffstat (limited to 'src')
| -rw-r--r-- | src/portable/microchip/samx7x/dcd_samx7x.c | 15 |
1 files changed, 3 insertions, 12 deletions
diff --git a/src/portable/microchip/samx7x/dcd_samx7x.c b/src/portable/microchip/samx7x/dcd_samx7x.c index 848febc66..a9e125b7c 100644 --- a/src/portable/microchip/samx7x/dcd_samx7x.c +++ b/src/portable/microchip/samx7x/dcd_samx7x.c @@ -49,7 +49,7 @@ # if TUD_OPT_HIGH_SPEED # define USE_DUAL_BANK 0 # else -# define USE_DUAL_BANK 0 +# define USE_DUAL_BANK 1 # endif #endif @@ -151,8 +151,7 @@ void dcd_remote_wakeup (uint8_t rhport) void dcd_connect(uint8_t rhport) { (void) rhport; - uint32_t irq_state = __get_PRIMASK(); - __disable_irq(); + dcd_int_disable(rhport); // Enable USB clock PMC->PMC_PCER1 = 1 << (ID_USBHS - 32); // Enable the USB controller in device mode @@ -178,15 +177,13 @@ void dcd_connect(uint8_t rhport) USBHS->USBHS_DEVCTRL &= ~USBHS_DEVCTRL_DETACH; // Freeze USB clock USBHS->USBHS_CTRL |= USBHS_CTRL_FRZCLK; - __set_PRIMASK(irq_state); } // Disconnect by disabling internal pull-up resistor on D+/D- void dcd_disconnect(uint8_t rhport) { (void) rhport; - uint32_t irq_state = __get_PRIMASK(); - __disable_irq(); + dcd_int_disable(rhport); // Disable all endpoints USBHS->USBHS_DEVEPT &= ~(0x3FF << USBHS_DEVEPT_EPEN0_Pos); // Unfreeze USB clock @@ -200,7 +197,6 @@ void dcd_disconnect(uint8_t rhport) USBHS->USBHS_DEVCTRL |= USBHS_DEVCTRL_DETACH; // Disable the device address USBHS->USBHS_DEVCTRL &=~(USBHS_DEVCTRL_ADDEN | USBHS_DEVCTRL_UADD_Msk); - __set_PRIMASK(irq_state); } static tusb_speed_t get_speed(void) @@ -584,11 +580,6 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t xfer->total_len = total_bytes; xfer->queued_len = 0; xfer->fifo = NULL; - - TU_LOG3("Xfer: "); - for(int i = 0; i < total_bytes; i++) - TU_LOG3("%02X ", buffer[i]); - TU_LOG3("\r\n"); if (EP_DMA_SUPPORT(epnum) && total_bytes != 0) { |