Split out the control endpoint logic

12 files changed, 435 insertions, 282 deletions

diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c
index f3d4622f8..81d7fa526 100644
--- a/src/class/cdc/cdc_device.c
+++ b/src/class/cdc/cdc_device.c
@@ -45,6 +45,7 @@
 // INCLUDE

 //--------------------------------------------------------------------+

 #include "cdc_device.h"

+#include "device/control.h"

 #include "device/usbd_pvt.h"

 

 //--------------------------------------------------------------------+

@@ -287,7 +288,7 @@ tusb_error_t cdcd_open(uint8_t rhport, tusb_desc_interface_t const * p_interface
   return TUSB_ERROR_NONE;

 }

 

-tusb_error_t cdcd_control_request_st(uint8_t rhport, tusb_control_request_t const * p_request)

+tusb_error_t cdcd_control_request(uint8_t rhport, tusb_control_request_t const * p_request, uint16_t bytes_already_sent)

 {

   //------------- Class Specific Request -------------//

   if (p_request->bmRequestType_bit.type != TUSB_REQ_TYPE_CLASS) return TUSB_ERROR_DCD_CONTROL_REQUEST_NOT_SUPPORT;

@@ -299,7 +300,7 @@ tusb_error_t cdcd_control_request_st(uint8_t rhport, tusb_control_request_t cons
   if ( (CDC_REQUEST_GET_LINE_CODING == p_request->bRequest) || (CDC_REQUEST_SET_LINE_CODING == p_request->bRequest) )

   {

     uint16_t len = tu_min16(sizeof(cdc_line_coding_t), p_request->wLength);

-    usbd_control_xfer_st(rhport, p_request->bmRequestType_bit.direction, (uint8_t*) &p_cdc->line_coding, len);

+    dcd_edpt_xfer(rhport, TUSB_DIR_IN_MASK, (uint8_t*) &p_cdc->line_coding, len);

 

     // Invoke callback

     if (CDC_REQUEST_SET_LINE_CODING == p_request->bRequest)

@@ -309,8 +310,6 @@ tusb_error_t cdcd_control_request_st(uint8_t rhport, tusb_control_request_t cons
   }

   else if (CDC_REQUEST_SET_CONTROL_LINE_STATE == p_request->bRequest )

   {

-    dcd_control_status(rhport, p_request->bmRequestType_bit.direction); // ACK control request

-

     // CDC PSTN v1.2 section 6.3.12

     // Bit 0: Indicates if DTE is present or not.

     //        This signal corresponds to V.24 signal 108/2 and RS-232 signal DTR (Data Terminal Ready)

@@ -323,7 +322,7 @@ tusb_error_t cdcd_control_request_st(uint8_t rhport, tusb_control_request_t cons
   }

   else

   {

-    dcd_control_stall(rhport); // stall unsupported request

+    return TUSB_ERROR_FAILED; // stall unsupported request

   }

   return TUSB_ERROR_NONE;

 }

diff --git a/src/class/cdc/cdc_device.h b/src/class/cdc/cdc_device.h
index 2e03793a9..88d37a83c 100644
--- a/src/class/cdc/cdc_device.h
+++ b/src/class/cdc/cdc_device.h
@@ -112,7 +112,7 @@ ATTR_WEAK void tud_cdc_line_coding_cb(uint8_t itf, cdc_line_coding_t const* p_li
 

 void         cdcd_init               (void);

 tusb_error_t cdcd_open               (uint8_t rhport, tusb_desc_interface_t const * p_interface_desc, uint16_t *p_length);

-tusb_error_t cdcd_control_request_st (uint8_t rhport, tusb_control_request_t const * p_request);

+tusb_error_t cdcd_control_request (uint8_t rhport, tusb_control_request_t const * p_request, uint16_t bytes_already_sent);

 tusb_error_t cdcd_xfer_cb            (uint8_t rhport, uint8_t edpt_addr, tusb_event_t event, uint32_t xferred_bytes);

 void         cdcd_reset              (uint8_t rhport);

 

diff --git a/src/class/hid/hid_device.c b/src/class/hid/hid_device.c
index 3e74950e6..aa7a8008e 100644
--- a/src/class/hid/hid_device.c
+++ b/src/class/hid/hid_device.c
@@ -46,6 +46,7 @@
 //--------------------------------------------------------------------+

 #include "common/tusb_common.h"

 #include "hid_device.h"

+#include "device/control.h"

 #include "device/usbd_pvt.h"

 

 //--------------------------------------------------------------------+

@@ -402,7 +403,7 @@ tusb_error_t hidd_open(uint8_t rhport, tusb_desc_interface_t const * desc_itf, u
   return TUSB_ERROR_NONE;

 }

 

-tusb_error_t hidd_control_request_st(uint8_t rhport, tusb_control_request_t const * p_request)

+tusb_error_t hidd_control_request(uint8_t rhport, tusb_control_request_t const * p_request, uint16_t bytes_already_sent)

 {

   hidd_interface_t* p_hid = get_interface_by_itfnum( (uint8_t) p_request->wIndex );

   TU_ASSERT(p_hid, TUSB_ERROR_FAILED);

@@ -416,14 +417,17 @@ tusb_error_t hidd_control_request_st(uint8_t rhport, tusb_control_request_t cons
 

     if (p_request->bRequest == TUSB_REQ_GET_DESCRIPTOR && desc_type == HID_DESC_TYPE_REPORT)

     {

-      // use device control buffer

-      TU_ASSERT ( p_hid->desc_len <= CFG_TUD_CTRL_BUFSIZE );

-      memcpy(_usbd_ctrl_buf, p_hid->desc_report, p_hid->desc_len);

+      // TODO: Handle zero length packet.

+      uint16_t remaining_bytes = p_hid->desc_len - bytes_already_sent;

+      if (remaining_bytes > 64) {

+          remaining_bytes = 64;

+      }

+      memcpy(_shared_control_buffer, p_hid->desc_report + bytes_already_sent, remaining_bytes);

 

-      usbd_control_xfer_st(rhport, p_request->bmRequestType_bit.direction, _usbd_ctrl_buf, p_hid->desc_len);

+      dcd_edpt_xfer(rhport, TUSB_DIR_IN_MASK, _shared_control_buffer, remaining_bytes);

     }else

     {

-      dcd_control_stall(rhport);

+      return TUSB_ERROR_FAILED;

     }

   }

   //------------- Class Specific Request -------------//

@@ -446,11 +450,11 @@ tusb_error_t hidd_control_request_st(uint8_t rhport, tusb_control_request_t cons
       }

 

       TU_ASSERT( xferlen > 0 );

-      usbd_control_xfer_st(rhport, p_request->bmRequestType_bit.direction, p_hid->report_buf, xferlen);

+      dcd_edpt_xfer(rhport, TUSB_DIR_IN_MASK, _shared_control_buffer, xferlen);

     }

     else if ( HID_REQ_CONTROL_SET_REPORT == p_request->bRequest )

     {

-      usbd_control_xfer_st(rhport, p_request->bmRequestType_bit.direction, _usbd_ctrl_buf, p_request->wLength);

+      dcd_edpt_xfer(rhport, 0, _shared_control_buffer, p_request->wLength);

 

       // wValue = Report Type | Report ID

       uint8_t const report_type = tu_u16_high(p_request->wValue);

@@ -458,37 +462,35 @@ tusb_error_t hidd_control_request_st(uint8_t rhport, tusb_control_request_t cons
 

       if ( p_hid->set_report_cb )

       {

-        p_hid->set_report_cb(report_id, (hid_report_type_t) report_type, _usbd_ctrl_buf, p_request->wLength);

+        p_hid->set_report_cb(report_id, (hid_report_type_t) report_type, _shared_control_buffer, p_request->wLength);

       }

     }

     else if (HID_REQ_CONTROL_SET_IDLE == p_request->bRequest)

     {

       // TODO idle rate of report

       p_hid->idle_rate = tu_u16_high(p_request->wValue);

-      dcd_control_status(rhport, p_request->bmRequestType_bit.direction);

     }

     else if (HID_REQ_CONTROL_GET_IDLE == p_request->bRequest)

     {

       // TODO idle rate of report

-      _usbd_ctrl_buf[0] = p_hid->idle_rate;

-      usbd_control_xfer_st(rhport, p_request->bmRequestType_bit.direction, _usbd_ctrl_buf, 1);

+      _shared_control_buffer[0] = p_hid->idle_rate;

+      dcd_edpt_xfer(rhport, TUSB_DIR_IN_MASK, _shared_control_buffer, 1);

     }

     else if (HID_REQ_CONTROL_GET_PROTOCOL == p_request->bRequest )

     {

-      _usbd_ctrl_buf[0] = 1-p_hid->boot_protocol;   // 0 is Boot, 1 is Report protocol

-      usbd_control_xfer_st(rhport, p_request->bmRequestType_bit.direction, _usbd_ctrl_buf, 1);

+      _shared_control_buffer[0] = 1-p_hid->boot_protocol;   // 0 is Boot, 1 is Report protocol

+      dcd_edpt_xfer(rhport, TUSB_DIR_IN_MASK, _shared_control_buffer, 1);

     }

     else if (HID_REQ_CONTROL_SET_PROTOCOL == p_request->bRequest )

     {

       p_hid->boot_protocol = 1 - p_request->wValue; // 0 is Boot, 1 is Report protocol

-      dcd_control_status(rhport, p_request->bmRequestType_bit.direction);

     }else

     {

-      dcd_control_stall(rhport);

+      return TUSB_ERROR_FAILED;

     }

   }else

   {

-    dcd_control_stall(rhport);

+    return TUSB_ERROR_FAILED;

   }

   return TUSB_ERROR_NONE;

 }

diff --git a/src/class/hid/hid_device.h b/src/class/hid/hid_device.h
index d5b9f3831..10aea10ac 100644
--- a/src/class/hid/hid_device.h
+++ b/src/class/hid/hid_device.h
@@ -378,7 +378,7 @@ ATTR_WEAK void tud_hid_mouse_set_report_cb(uint8_t report_id, hid_report_type_t
 

 void hidd_init(void);

 tusb_error_t hidd_open(uint8_t rhport, tusb_desc_interface_t const * p_interface_desc, uint16_t *p_length);

-tusb_error_t hidd_control_request_st(uint8_t rhport, tusb_control_request_t const * p_request);

+tusb_error_t hidd_control_request(uint8_t rhport, tusb_control_request_t const * p_request, uint16_t bytes_already_sent);

 tusb_error_t hidd_xfer_cb(uint8_t rhport, uint8_t edpt_addr, tusb_event_t event, uint32_t xferred_bytes);

 void hidd_reset(uint8_t rhport);

 

@@ -389,5 +389,3 @@ void hidd_reset(uint8_t rhport);
 #endif

 

 #endif /* _TUSB_HID_DEVICE_H_ */

-

-

diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c
index aa9ebbbc9..3c9997b95 100644
--- a/src/class/msc/msc_device.c
+++ b/src/class/msc/msc_device.c
@@ -47,6 +47,7 @@
 

 #include "common/tusb_common.h"

 #include "msc_device.h"

+#include "device/control.h"

 #include "device/usbd_pvt.h"

 

 //--------------------------------------------------------------------+

@@ -146,22 +147,22 @@ tusb_error_t mscd_open(uint8_t rhport, tusb_desc_interface_t const * p_desc_itf,
   return TUSB_ERROR_NONE;

 }

 

-tusb_error_t mscd_control_request_st(uint8_t rhport, tusb_control_request_t const * p_request)

+tusb_error_t mscd_control_request(uint8_t rhport, tusb_control_request_t const * p_request, uint16_t bytes_already_sent)

 {

   TU_ASSERT(p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS, TUSB_ERROR_DCD_CONTROL_REQUEST_NOT_SUPPORT);

 

   if(MSC_REQ_RESET == p_request->bRequest)

   {

-    dcd_control_status(rhport, p_request->bmRequestType_bit.direction);

+    // TODO: Actually reset.

   }

   else if (MSC_REQ_GET_MAX_LUN == p_request->bRequest)

   {

     // returned MAX LUN is minus 1 by specs

-    _usbd_ctrl_buf[0] = CFG_TUD_MSC_MAXLUN-1;

-    usbd_control_xfer_st(rhport, p_request->bmRequestType_bit.direction, _usbd_ctrl_buf, 1);

+    _shared_control_buffer[0] = CFG_TUD_MSC_MAXLUN-1;

+    dcd_edpt_xfer(rhport, TUSB_DIR_IN_MASK, _shared_control_buffer, 1);

   }else

   {

-    dcd_control_stall(rhport); // stall unsupported request

+    return TUSB_ERROR_FAILED; // stall unsupported request

   }

   return TUSB_ERROR_NONE;

 }

diff --git a/src/class/msc/msc_device.h b/src/class/msc/msc_device.h
index 92ab4dde0..a5bc54ff9 100644
--- a/src/class/msc/msc_device.h
+++ b/src/class/msc/msc_device.h
@@ -198,7 +198,7 @@ ATTR_WEAK bool tud_lun_capacity_cb(uint8_t lun, uint32_t* last_valid_sector, uin
 

 void mscd_init(void);

 tusb_error_t mscd_open(uint8_t rhport, tusb_desc_interface_t const * p_interface_desc, uint16_t *p_length);

-tusb_error_t mscd_control_request_st(uint8_t rhport, tusb_control_request_t const * p_request);

+tusb_error_t mscd_control_request(uint8_t rhport, tusb_control_request_t const * p_request, uint16_t bytes_already_sent);

 tusb_error_t mscd_xfer_cb(uint8_t rhport, uint8_t edpt_addr, tusb_event_t event, uint32_t xferred_bytes);

 void mscd_reset(uint8_t rhport);

 

diff --git a/src/device/control.c b/src/device/control.c
new file mode 100644
index 000000000..4944a999e
--- /dev/null
+++ b/src/device/control.c
@@ -0,0 +1,252 @@
+/**************************************************************************/

+/*!

+    @file     usbd.c

+    @author   hathach (tinyusb.org)

+

+    @section LICENSE

+

+    Software License Agreement (BSD License)

+

+    Copyright (c) 2013, hathach (tinyusb.org)

+    All rights reserved.

+

+    Redistribution and use in source and binary forms, with or without

+    modification, are permitted provided that the following conditions are met:

+    1. Redistributions of source code must retain the above copyright

+    notice, this list of conditions and the following disclaimer.

+    2. Redistributions in binary form must reproduce the above copyright

+    notice, this list of conditions and the following disclaimer in the

+    documentation and/or other materials provided with the distribution.

+    3. Neither the name of the copyright holders nor the

+    names of its contributors may be used to endorse or promote products

+    derived from this software without specific prior written permission.

+

+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY

+    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

+    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

+    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY

+    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

+    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

+    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

+    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

+    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+

+    This file is part of the tinyusb stack.

+*/

+/**************************************************************************/

+

+#include "tusb_option.h"

+

+#if TUSB_OPT_DEVICE_ENABLED

+

+#define _TINY_USB_SOURCE_FILE_

+

+#include "tusb.h"

+#include "control.h"

+#include "device/usbd_pvt.h"

+

+control_t control_state;

+

+void controld_reset(uint8_t rhport) {

+    control_state.current_stage = CONTROL_STAGE_SETUP;

+}

+

+void controld_init(void) {

+}

+

+// Helper to send STATUS (zero length) packet

+// Note dir is value of direction bit in setup packet (i.e DATA stage direction)

+static inline bool dcd_control_status(uint8_t rhport, uint8_t dir)

+{

+  // status direction is reversed to one in the setup packet

+  return dcd_edpt_xfer(rhport, 1-dir, NULL, 0);

+}

+

+static inline void dcd_control_stall(uint8_t rhport)

+{

+  dcd_edpt_stall(rhport, 0 | TUSB_DIR_IN_MASK);

+}

+

+

+// return len of descriptor and change pointer to descriptor's buffer

+static uint16_t get_descriptor(uint8_t rhport, tusb_control_request_t const * const p_request, uint8_t const ** pp_buffer)

+{

+  (void) rhport;

+

+  tusb_desc_type_t const desc_type = (tusb_desc_type_t) tu_u16_high(p_request->wValue);

+  uint8_t const desc_index = tu_u16_low( p_request->wValue );

+

+  uint8_t const * desc_data = NULL ;

+  uint16_t len = 0;

+

+  switch(desc_type)

+  {

+    case TUSB_DESC_DEVICE:

+      desc_data = (uint8_t const *) usbd_desc_set->device;

+      len       = sizeof(tusb_desc_device_t);

+    break;

+

+    case TUSB_DESC_CONFIGURATION:

+      desc_data = (uint8_t const *) usbd_desc_set->config;

+      len       = ((tusb_desc_configuration_t const*) desc_data)->wTotalLength;

+    break;

+

+    case TUSB_DESC_STRING:

+      // String Descriptor always uses the desc set from user

+      if ( desc_index < tud_desc_set.string_count )

+      {

+        desc_data = tud_desc_set.string_arr[desc_index];

+        TU_VERIFY( desc_data != NULL, 0 );

+

+        len  = desc_data[0];  // first byte of descriptor is its size

+      }else

+      {

+        // out of range

+        /* The 0xee string is indeed a Microsoft USB extension.

+         * It can be used to tell Windows what driver it should use for the device !!!

+         */

+        return 0;

+      }

+    break;

+

+    case TUSB_DESC_DEVICE_QUALIFIER:

+      // TODO If not highspeed capable stall this request otherwise

+      // return the descriptor that could work in highspeed

+      return 0;

+    break;

+

+    default: return 0;

+  }

+

+  TU_ASSERT( desc_data != NULL, 0);

+

+  // up to Host's length

+  len = tu_min16(p_request->wLength, len );

+  (*pp_buffer) = desc_data;

+

+  return len;

+}

+

+tusb_error_t controld_xfer_cb(uint8_t rhport, uint8_t edpt_addr, tusb_event_t event, uint32_t xferred_bytes) {

+    if (control_state.current_stage == CONTROL_STAGE_STATUS && xferred_bytes == 0) {

+        control_state.current_stage = CONTROL_STAGE_SETUP;

+        return TUSB_ERROR_NONE;

+    }

+    tusb_error_t error = TUSB_ERROR_NONE;

+    control_state.total_transferred += xferred_bytes;

+    tusb_control_request_t const *p_request = &control_state.current_request;

+

+    if (p_request->wLength == control_state.total_transferred || xferred_bytes < 64) {

+        control_state.current_stage = CONTROL_STAGE_STATUS;

+        dcd_control_status(rhport, p_request->bmRequestType_bit.direction);

+    } else {

+        if (TUSB_REQ_RCPT_INTERFACE == p_request->bmRequestType_bit.recipient) {

+          error = tud_control_interface_control_cb(rhport, tu_u16_low(p_request->wIndex), p_request, control_state.total_transferred);

+        } else {

+          error = controld_process_control_request(rhport, p_request, control_state.total_transferred);

+        }

+    }

+    return error;

+}

+

+// This tracks the state of a control request.

+tusb_error_t controld_process_setup_request(uint8_t rhport, tusb_control_request_t const * p_request) {

+  tusb_error_t error = TUSB_ERROR_NONE;

+  memcpy(&control_state.current_request, p_request, sizeof(tusb_control_request_t));

+  if (p_request->wLength == 0) {

+      control_state.current_stage = CONTROL_STAGE_STATUS;

+  } else {

+      control_state.current_stage = CONTROL_STAGE_DATA;

+      control_state.total_transferred = 0;

+  }

+

+

+  if ( TUSB_REQ_RCPT_INTERFACE == p_request->bmRequestType_bit.recipient )

+  {

+    error = tud_control_interface_control_cb(rhport, tu_u16_low(p_request->wIndex), p_request, 0);

+  } else {

+    error = controld_process_control_request(rhport, p_request, 0);

+  }

+

+  if (error != TUSB_ERROR_NONE) {

+    dcd_control_stall(rhport); // Stall errored requests

+  } else if (control_state.current_stage == CONTROL_STAGE_STATUS) {

+    dcd_control_status(rhport, p_request->bmRequestType_bit.direction);

+  }

+  return error;

+}

+

+// This handles the actual request and its response.

+tusb_error_t controld_process_control_request(uint8_t rhport, tusb_control_request_t const * p_request, uint16_t bytes_already_sent)

+{

+  tusb_error_t error = TUSB_ERROR_NONE;

+  uint8_t ep_addr = 0;

+  if (p_request->bmRequestType_bit.direction == TUSB_DIR_IN) {

+      ep_addr |= TUSB_DIR_IN_MASK;

+  }

+

+  //------------- Standard Request e.g in enumeration -------------//

+  if( TUSB_REQ_RCPT_DEVICE    == p_request->bmRequestType_bit.recipient &&

+      TUSB_REQ_TYPE_STANDARD  == p_request->bmRequestType_bit.type ) {

+    switch (p_request->bRequest) {

+      case TUSB_REQ_GET_DESCRIPTOR: {

+        uint8_t  const * buffer = NULL;

+        uint16_t const   len    = get_descriptor(rhport, p_request, &buffer);

+

+        if (len) {

+          uint16_t remaining_bytes = len - bytes_already_sent;

+          if (remaining_bytes > 64) {

+              remaining_bytes = 64;

+          }

+          memcpy(_shared_control_buffer, buffer + bytes_already_sent, remaining_bytes);

+          dcd_edpt_xfer(rhport, ep_addr, _shared_control_buffer, remaining_bytes);

+        } else {

+          return TUSB_ERROR_FAILED;

+        }

+        break;

+      }

+      case TUSB_REQ_GET_CONFIGURATION:

+        memcpy(_shared_control_buffer, &control_state.config, 1);

+        dcd_edpt_xfer(rhport, ep_addr, _shared_control_buffer, 1);

+        break;

+      case TUSB_REQ_SET_ADDRESS:

+        dcd_set_address(rhport, (uint8_t) p_request->wValue);

+        break;

+      case TUSB_REQ_SET_CONFIGURATION:

+        control_state.config = p_request->wValue;

+        tud_control_set_config_cb (rhport, control_state.config);

+        break;

+      default:

+        return TUSB_ERROR_FAILED;

+    }

+  } else if (p_request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_ENDPOINT &&

+             p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD) {

+    //------------- Endpoint Request -------------//

+    switch (p_request->bRequest) {

+      case TUSB_REQ_GET_STATUS: {

+        uint16_t status = dcd_edpt_stalled(rhport, tu_u16_low(p_request->wIndex)) ? 0x0001 : 0x0000;

+        memcpy(_shared_control_buffer, &status, 2);

+

+        dcd_edpt_xfer(rhport, ep_addr, _shared_control_buffer, 2);

+        break;

+      }

+      case TUSB_REQ_CLEAR_FEATURE:

+        // only endpoint feature is halted/stalled

+        dcd_edpt_clear_stall(rhport, tu_u16_low(p_request->wIndex));

+        break;

+      case TUSB_REQ_SET_FEATURE:

+        // only endpoint feature is halted/stalled

+        dcd_edpt_stall(rhport, tu_u16_low(p_request->wIndex));

+        break;

+      default:

+        return TUSB_ERROR_FAILED;

+    }

+  } else {

+    //------------- Unsupported Request -------------//

+    return TUSB_ERROR_FAILED;

+  }

+  return error;

+}

+

+#endif

diff --git a/src/device/control.h b/src/device/control.h
new file mode 100644
index 000000000..24f0d0a14
--- /dev/null
+++ b/src/device/control.h
@@ -0,0 +1,95 @@
+/**************************************************************************/

+/*!

+    @file     usbd.h

+    @author   hathach (tinyusb.org)

+

+    @section LICENSE

+

+    Software License Agreement (BSD License)

+

+    Copyright (c) 2013, hathach (tinyusb.org)

+    All rights reserved.

+

+    Redistribution and use in source and binary forms, with or without

+    modification, are permitted provided that the following conditions are met:

+    1. Redistributions of source code must retain the above copyright

+    notice, this list of conditions and the following disclaimer.

+    2. Redistributions in binary form must reproduce the above copyright

+    notice, this list of conditions and the following disclaimer in the

+    documentation and/or other materials provided with the distribution.

+    3. Neither the name of the copyright holders nor the

+    names of its contributors may be used to endorse or promote products

+    derived from this software without specific prior written permission.

+

+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY

+    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

+    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

+    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY

+    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

+    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

+    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

+    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

+    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+

+    This file is part of the tinyusb stack.

+*/

+/**************************************************************************/

+

+/** \ingroup group_usbd

+ *  @{ */

+

+#ifndef _TUSB_CONTROL_H_

+#define _TUSB_CONTROL_H_

+

+#ifdef __cplusplus

+ extern "C" {

+#endif

+

+#include "tusb.h"

+

+typedef enum {

+    CONTROL_STAGE_SETUP, // Waiting for a setup token.

+    CONTROL_STAGE_DATA, // In the process of sending or receiving data.

+    CONTROL_STAGE_STATUS // In the process of transmitting the STATUS ZLP.

+} control_stage_t;

+

+typedef struct {

+    control_stage_t current_stage;

+    tusb_control_request_t current_request;

+    uint16_t total_transferred;

+    uint8_t config;

+} control_t;

+

+CFG_TUSB_ATTR_USBRAM CFG_TUSB_MEM_ALIGN uint8_t _shared_control_buffer[64];

+

+tusb_error_t controld_process_setup_request(uint8_t rhport, tusb_control_request_t const * const p_request);

+

+// Callback when the configuration of the device is changed.

+tusb_error_t tud_control_set_config_cb(uint8_t rhport, uint8_t config_number);

+

+tusb_error_t tud_control_interface_control_cb(uint8_t rhport, uint8_t interface, tusb_control_request_t const * const p_request, uint16_t bytes_already_sent);

+

+//--------------------------------------------------------------------+

+// INTERNAL API

+//--------------------------------------------------------------------+

+

+void controld_init(void);

+tusb_error_t controld_open(uint8_t rhport, tusb_desc_interface_t const * p_interface_desc, uint16_t *p_length);

+

+// This tracks the state of a control request.

+tusb_error_t controld_process_setup_request(uint8_t rhport, tusb_control_request_t const * p_request);

+

+// This handles the actual request and its response.

+tusb_error_t controld_process_control_request(uint8_t rhport, tusb_control_request_t const * p_request, uint16_t bytes_already_sent);

+

+tusb_error_t controld_xfer_cb(uint8_t rhport, uint8_t edpt_addr, tusb_event_t event, uint32_t xferred_bytes);

+void controld_reset(uint8_t rhport);

+

+#ifdef __cplusplus

+ }

+#endif

+

+#endif /* _TUSB_CONTROL_H_ */

+

+/** @} */

diff --git a/src/device/dcd.h b/src/device/dcd.h
index c1715a5b7..0c976edec 100644
--- a/src/device/dcd.h
+++ b/src/device/dcd.h
@@ -135,22 +135,6 @@ void dcd_edpt_stall       (uint8_t rhport, uint8_t ep_addr);
 void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr);

 bool dcd_edpt_stalled     (uint8_t rhport, uint8_t ep_addr);

 

-//------------- Control Endpoint -------------//

-bool dcd_control_xfer     (uint8_t rhport, uint8_t dir, uint8_t * buffer, uint16_t length);

-

-// Helper to send STATUS (zero length) packet

-// Note dir is value of direction bit in setup packet (i.e DATA stage direction)

-static inline bool dcd_control_status(uint8_t rhport, uint8_t dir)

-{

-  // status direction is reversed to one in the setup packet

-  return dcd_control_xfer(rhport, 1-dir, NULL, 0);

-}

-

-static inline void dcd_control_stall(uint8_t rhport)

-{

-  dcd_edpt_stall(rhport, 0 | TUSB_DIR_IN_MASK);

-}

-

 #ifdef __cplusplus

  }

 #endif

diff --git a/src/device/usbd.c b/src/device/usbd.c
index 8155b585f..3c77fefba 100644
--- a/src/device/usbd.c
+++ b/src/device/usbd.c
@@ -36,12 +36,15 @@
 */

 /**************************************************************************/

 

+// This top level class manages the bus state and delegates events to class-specific drivers.

+

 #include "tusb_option.h"

 

 #if TUSB_OPT_DEVICE_ENABLED

 

 #define _TINY_USB_SOURCE_FILE_

 

+#include "control.h"

 #include "tusb.h"

 #include "usbd.h"

 #include "device/usbd_pvt.h"

@@ -72,7 +75,6 @@ typedef struct {
   uint8_t ep2drv[2][8];

 }usbd_device_t;

 

-CFG_TUSB_ATTR_USBRAM CFG_TUSB_MEM_ALIGN uint8_t _usbd_ctrl_buf[CFG_TUD_CTRL_BUFSIZE];

 static usbd_device_t _usbd_dev;

 

 

@@ -92,7 +94,8 @@ typedef struct {
 

   void         (* init           ) (void);

   tusb_error_t (* open           ) (uint8_t rhport, tusb_desc_interface_t const * desc_intf, uint16_t* p_length);

-  tusb_error_t (* control_req_st ) (uint8_t rhport, tusb_control_request_t const *);

+  // Control request is called one or more times for a request and can queue multiple data packets.

+  tusb_error_t (* control_request ) (uint8_t rhport, tusb_control_request_t const *, uint16_t bytes_already_sent);

   tusb_error_t (* xfer_cb        ) (uint8_t rhport, uint8_t ep_addr, tusb_event_t, uint32_t);

   void         (* sof            ) (uint8_t rhport);

   void         (* reset          ) (uint8_t);

@@ -100,52 +103,61 @@ typedef struct {
 

 static usbd_class_driver_t const usbd_class_drivers[] =

 {

+    {

+        .class_code      = TUSB_CLASS_UNSPECIFIED,

+        .init            = controld_init,

+        .open            = NULL,

+        .control_request = NULL,

+        .xfer_cb         = controld_xfer_cb,

+        .sof             = NULL,

+        .reset           = controld_reset

+    },

   #if CFG_TUD_CDC

     {

-        .class_code     = TUSB_CLASS_CDC,

-        .init           = cdcd_init,

-        .open           = cdcd_open,

-        .control_req_st = cdcd_control_request_st,

-        .xfer_cb        = cdcd_xfer_cb,

-        .sof            = NULL,

-        .reset          = cdcd_reset

+        .class_code      = TUSB_CLASS_CDC,

+        .init            = cdcd_init,

+        .open            = cdcd_open,

+        .control_request = cdcd_control_request,

+        .xfer_cb         = cdcd_xfer_cb,

+        .sof             = NULL,

+        .reset           = cdcd_reset

     },

   #endif

 

   #if CFG_TUD_MSC

     {

-        .class_code     = TUSB_CLASS_MSC,

-        .init           = mscd_init,

-        .open           = mscd_open,

-        .control_req_st = mscd_control_request_st,

-        .xfer_cb        = mscd_xfer_cb,

-        .sof            = NULL,

-        .reset          = mscd_reset

+        .class_code      = TUSB_CLASS_MSC,

+        .init            = mscd_init,

+        .open            = mscd_open,

+        .control_request = mscd_control_request,

+        .xfer_cb         = mscd_xfer_cb,

+        .sof             = NULL,

+        .reset           = mscd_reset

     },

   #endif

 

 

   #if CFG_TUD_HID

     {

-        .class_code     = TUSB_CLASS_HID,

-        .init           = hidd_init,

-        .open           = hidd_open,

-        .control_req_st = hidd_control_request_st,

-        .xfer_cb        = hidd_xfer_cb,

-        .sof            = NULL,

-        .reset          = hidd_reset

+        .class_code      = TUSB_CLASS_HID,

+        .init            = hidd_init,

+        .open            = hidd_open,

+        .control_request = hidd_control_request,

+        .xfer_cb         = hidd_xfer_cb,

+        .sof             = NULL,

+        .reset           = hidd_reset

     },

   #endif

 

   #if CFG_TUD_CUSTOM_CLASS

     {

-        .class_code     = TUSB_CLASS_VENDOR_SPECIFIC,

-        .init           = cusd_init,

-        .open           = cusd_open,

-        .control_req_st = cusd_control_request_st,

-        .xfer_cb        = cusd_xfer_cb,

-        .sof            = NULL,

-        .reset          = cusd_reset

+        .class_code      = TUSB_CLASS_VENDOR_SPECIFIC,

+        .init            = cusd_init,

+        .open            = cusd_open,

+        .control_request = cusd_control_request,

+        .xfer_cb         = cusd_xfer_cb,

+        .sof             = NULL,

+        .reset           = cusd_reset

     },

   #endif

 };

@@ -162,16 +174,10 @@ OSAL_TASK_DEF(_usbd_task_def, "usbd", usbd_task, CFG_TUD_TASK_PRIO, CFG_TUD_TASK
 OSAL_QUEUE_DEF(_usbd_qdef, CFG_TUD_TASK_QUEUE_SZ, dcd_event_t);

 static osal_queue_t _usbd_q;

 

-/*------------- control transfer semaphore -------------*/

-static osal_semaphore_def_t _usbd_sem_def;

-osal_semaphore_t _usbd_ctrl_sem;

-

 //--------------------------------------------------------------------+

 // INTERNAL FUNCTION

 //--------------------------------------------------------------------+

 static void mark_interface_endpoint(uint8_t const* p_desc, uint16_t desc_len, uint8_t driver_id);

-static tusb_error_t proc_set_config_req(uint8_t rhport, uint8_t config_number);

-static uint16_t get_descriptor(uint8_t rhport, tusb_control_request_t const * const p_request, uint8_t const ** pp_buffer);

 

 //--------------------------------------------------------------------+

 // APPLICATION API

@@ -184,7 +190,6 @@ bool tud_mounted(void)
 //--------------------------------------------------------------------+

 // IMPLEMENTATION

 //--------------------------------------------------------------------+

-static tusb_error_t proc_control_request_st(uint8_t rhport, tusb_control_request_t const * const p_request);

 static tusb_error_t usbd_main_st(void);

 

 tusb_error_t usbd_init (void)

@@ -201,9 +206,6 @@ tusb_error_t usbd_init (void)
   _usbd_q = osal_queue_create(&_usbd_qdef);

   TU_VERIFY(_usbd_q, TUSB_ERROR_OSAL_QUEUE_FAILED);

 

-  _usbd_ctrl_sem = osal_semaphore_create(&_usbd_sem_def);

-  TU_VERIFY(_usbd_q, TUSB_ERROR_OSAL_SEMAPHORE_FAILED);

-

   osal_task_create(&_usbd_task_def);

 

   //------------- class init -------------//

@@ -217,6 +219,9 @@ static void usbd_reset(uint8_t rhport)
   tu_varclr(&_usbd_dev);

   memset(_usbd_dev.itf2drv, 0xff, sizeof(_usbd_dev.itf2drv)); // invalid mapping

   memset(_usbd_dev.ep2drv , 0xff, sizeof(_usbd_dev.ep2drv )); // invalid mapping

+  // Always map the 0th endpoint to the control driver.

+  _usbd_dev.ep2drv[TUSB_DIR_IN][0] = 0;

+  _usbd_dev.ep2drv[TUSB_DIR_OUT][0] = 0;

 

   for (uint8_t i = 0; i < USBD_CLASS_DRIVER_COUNT; i++)

   {

@@ -239,8 +244,6 @@ void usbd_task( void* param)
   OSAL_TASK_END

 }

 

-extern uint32_t setup_count;

-

 static tusb_error_t usbd_main_st(void)

 {

   dcd_event_t event;

@@ -257,7 +260,8 @@ static tusb_error_t usbd_main_st(void)
 

     if ( DCD_EVENT_SETUP_RECEIVED == event.event_id )

     {

-      proc_control_request_st(event.rhport, &event.setup_received);

+      // Setup tokens are unique to the Control endpointso we delegate to it directly.

+      controld_process_setup_request(event.rhport, &event.setup_received);

     }

     else if (DCD_EVENT_XFER_COMPLETE == event.event_id)

     {

@@ -274,13 +278,11 @@ static tusb_error_t usbd_main_st(void)
     {

       usbd_reset(event.rhport);

       osal_queue_reset(_usbd_q);

-      osal_semaphore_reset(_usbd_ctrl_sem);

     }

     else if (DCD_EVENT_UNPLUGGED == event.event_id)

     {

       usbd_reset(event.rhport);

       osal_queue_reset(_usbd_q);

-      osal_semaphore_reset(_usbd_ctrl_sem);

 

       tud_umount_cb(); // invoke callback

     }

@@ -307,113 +309,18 @@ static tusb_error_t usbd_main_st(void)
     return err;

 }

 

-//--------------------------------------------------------------------+

-// CONTROL REQUEST

-//--------------------------------------------------------------------+

-static tusb_error_t proc_control_request_st(uint8_t rhport, tusb_control_request_t const * const p_request)

-{

-  tusb_error_t error = TUSB_ERROR_NONE;

-

-  //------------- Standard Request e.g in enumeration -------------//

-  if( TUSB_REQ_RCPT_DEVICE    == p_request->bmRequestType_bit.recipient &&

-      TUSB_REQ_TYPE_STANDARD  == p_request->bmRequestType_bit.type )

-  {

-    if ( TUSB_REQ_GET_DESCRIPTOR == p_request->bRequest )

-    {

-      uint8_t  const * buffer = NULL;

-      uint16_t const   len    = get_descriptor(rhport, p_request, &buffer);

-

-

-      if ( len )

-      {

-        TU_ASSERT( len <= CFG_TUD_CTRL_BUFSIZE );

-        memcpy(_usbd_ctrl_buf, buffer, len);

-        usbd_control_xfer_st(rhport, p_request->bmRequestType_bit.direction, _usbd_ctrl_buf, len);

-      }else

-      {

-        dcd_control_stall(rhport); // stall unsupported descriptor

-      }

-    }

-    else if (TUSB_REQ_GET_CONFIGURATION == p_request->bRequest )

-    {

-      memcpy(_usbd_ctrl_buf, &_usbd_dev.config_num, 1);

-      usbd_control_xfer_st(rhport, p_request->bmRequestType_bit.direction, _usbd_ctrl_buf, 1);

-    }

-    else if ( TUSB_REQ_SET_ADDRESS == p_request->bRequest )

-    {

-      dcd_set_address(rhport, (uint8_t) p_request->wValue);

-

-      #if CFG_TUSB_MCU != OPT_MCU_NRF5X // nrf5x auto handle set address, we must not return status

-      dcd_control_status(rhport, p_request->bmRequestType_bit.direction);

-      #endif

-    }

-    else if ( TUSB_REQ_SET_CONFIGURATION == p_request->bRequest )

-    {

-      proc_set_config_req(rhport, (uint8_t) p_request->wValue);

-      dcd_control_status(rhport, p_request->bmRequestType_bit.direction);

-    }

-    else

-    {

-      dcd_control_stall(rhport); // Stall unsupported request

-    }

-  }

-

-  //------------- Class/Interface Specific Request -------------//

-  else if ( TUSB_REQ_RCPT_INTERFACE == p_request->bmRequestType_bit.recipient )

-  {

-    if (_usbd_dev.itf2drv[ tu_u16_low(p_request->wIndex) ] < USBD_CLASS_DRIVER_COUNT)

-    {

-      error = usbd_class_drivers[ _usbd_dev.itf2drv[ tu_u16_low(p_request->wIndex) ] ].control_req_st(rhport, p_request);

-    }else

-    {

-      dcd_control_stall(rhport); // Stall unsupported request

-    }

-  }

-

-  //------------- Endpoint Request -------------//

-  else if ( TUSB_REQ_RCPT_ENDPOINT == p_request->bmRequestType_bit.recipient &&

-            TUSB_REQ_TYPE_STANDARD == p_request->bmRequestType_bit.type)

-  {

-    if (TUSB_REQ_GET_STATUS == p_request->bRequest )

-    {

-      uint16_t status = dcd_edpt_stalled(rhport, tu_u16_low(p_request->wIndex)) ? 0x0001 : 0x0000;

-      memcpy(_usbd_ctrl_buf, &status, 2);

-

-      usbd_control_xfer_st(rhport, p_request->bmRequestType_bit.direction, _usbd_ctrl_buf, 2);

-    }

-    else if (TUSB_REQ_CLEAR_FEATURE == p_request->bRequest )

-    {

-      // only endpoint feature is halted/stalled

-      dcd_edpt_clear_stall(rhport, tu_u16_low(p_request->wIndex));

-      dcd_control_status(rhport, p_request->bmRequestType_bit.direction);

-    }

-    else if (TUSB_REQ_SET_FEATURE == p_request->bRequest )

+tusb_error_t tud_control_interface_control_cb(uint8_t rhport, uint8_t interface, tusb_control_request_t const * const p_request, uint16_t bytes_already_sent) {

+    if (_usbd_dev.itf2drv[ interface ] < USBD_CLASS_DRIVER_COUNT)

     {

-      // only endpoint feature is halted/stalled

-      dcd_edpt_stall(rhport, tu_u16_low(p_request->wIndex));

-      dcd_control_status(rhport, p_request->bmRequestType_bit.direction);

+      return usbd_class_drivers[_usbd_dev.itf2drv[interface]].control_request(rhport, p_request, bytes_already_sent);

     }

-    else

-    {

-      dcd_control_stall(rhport); // Stall unsupported request

-    }

-  }

-

-  //------------- Unsupported Request -------------//

-  else

-  {

-    dcd_control_stall(rhport); // Stall unsupported request

-  }

-  if (error != TUSB_ERROR_NONE) {

-    dcd_control_stall(rhport); // Stall errored requests

-  }

-  return error;

+    return TUSB_ERROR_FAILED;

 }

 

 // Process Set Configure Request

 // TODO Host (windows) can get HID report descriptor before set configured

 // may need to open interface before set configured

-static tusb_error_t proc_set_config_req(uint8_t rhport, uint8_t config_number)

+tusb_error_t tud_control_set_config_cb(uint8_t rhport, uint8_t config_number)

 {

   dcd_set_config(rhport, config_number);

 

@@ -465,65 +372,6 @@ static tusb_error_t proc_set_config_req(uint8_t rhport, uint8_t config_number)
   return TUSB_ERROR_NONE;

 }

 

-// return len of descriptor and change pointer to descriptor's buffer

-static uint16_t get_descriptor(uint8_t rhport, tusb_control_request_t const * const p_request, uint8_t const ** pp_buffer)

-{

-  (void) rhport;

-

-  tusb_desc_type_t const desc_type = (tusb_desc_type_t) tu_u16_high(p_request->wValue);

-  uint8_t const desc_index = tu_u16_low( p_request->wValue );

-

-  uint8_t const * desc_data = NULL ;

-  uint16_t len = 0;

-

-  switch(desc_type)

-  {

-    case TUSB_DESC_DEVICE:

-      desc_data = (uint8_t const *) usbd_desc_set->device;

-      len       = sizeof(tusb_desc_device_t);

-    break;

-

-    case TUSB_DESC_CONFIGURATION:

-      desc_data = (uint8_t const *) usbd_desc_set->config;

-      len       = ((tusb_desc_configuration_t const*) desc_data)->wTotalLength;

-    break;

-

-    case TUSB_DESC_STRING:

-      // String Descriptor always uses the desc set from user

-      if ( desc_index < tud_desc_set.string_count )

-      {

-        desc_data = tud_desc_set.string_arr[desc_index];

-        TU_VERIFY( desc_data != NULL, 0 );

-

-        len  = desc_data[0];  // first byte of descriptor is its size

-      }else

-      {

-        // out of range

-        /* The 0xee string is indeed a Microsoft USB extension.

-         * It can be used to tell Windows what driver it should use for the device !!!

-         */

-        return 0;

-      }

-    break;

-

-    case TUSB_DESC_DEVICE_QUALIFIER:

-      // TODO If not highspeed capable stall this request otherwise

-      // return the descriptor that could work in highspeed

-      return 0;

-    break;

-

-    default: return 0;

-  }

-

-  TU_ASSERT( desc_data != NULL, 0);

-

-  // up to Host's length

-  len = tu_min16(p_request->wLength, len );

-  (*pp_buffer) = desc_data;

-

-  return len;

-}

-

 // Helper marking endpoint of interface belongs to class driver

 static void mark_interface_endpoint(uint8_t const* p_desc, uint16_t desc_len, uint8_t driver_id)

 {

@@ -569,18 +417,7 @@ void dcd_event_handler(dcd_event_t const * event, bool in_isr)
     break;

 

     case DCD_EVENT_XFER_COMPLETE:

-      if (event->xfer_complete.ep_addr == 0)

-      {

-        // only signal data stage, skip status (zero byte)

-        if (event->xfer_complete.len)

-        {

-          (void) event->xfer_complete.result; // TODO handle control error/stalled

-          osal_semaphore_post( _usbd_ctrl_sem, in_isr);

-        }

-      }else

-      {

-        osal_queue_send(_usbd_q, event, in_isr);

-      }

+      osal_queue_send(_usbd_q, event, in_isr);

       TU_ASSERT(event->xfer_complete.result == DCD_XFER_SUCCESS,);

     break;

 

@@ -621,15 +458,6 @@ void dcd_event_xfer_complete (uint8_t rhport, uint8_t ep_addr, uint32_t xferred_
 //--------------------------------------------------------------------+

 // Helper

 //--------------------------------------------------------------------+

-uint32_t usbd_control_xfer_st(uint8_t _rhport, uint8_t _dir, uint8_t* _buffer, uint16_t _len) {

-    uint32_t err = TUSB_ERROR_NONE;

-    if (_len) {

-      dcd_control_xfer(_rhport, _dir, (uint8_t*) _buffer, _len);

-    }

-

-    dcd_control_status(_rhport, _dir);

-    return err;

-}

 

 tusb_error_t usbd_open_edpt_pair(uint8_t rhport, tusb_desc_endpoint_t const* p_desc_ep, uint8_t xfer_type, uint8_t* ep_out, uint8_t* ep_in)

 {

diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h
index ecb71f771..bbbe0a604 100644
--- a/src/device/usbd_pvt.h
+++ b/src/device/usbd_pvt.h
@@ -45,10 +45,6 @@
  extern "C" {
 #endif
 
-// for used by usbd_control_xfer_st() only, must not be used directly
-extern osal_semaphore_t _usbd_ctrl_sem;
-extern uint8_t _usbd_ctrl_buf[CFG_TUD_CTRL_BUFSIZE];
-
 // Either point to tud_desc_set or usbd_auto_desc_set depending on CFG_TUD_DESC_AUTO
 extern tud_desc_set_t const* usbd_desc_set;
 
@@ -64,8 +60,6 @@ void         usbd_task (void* param);
 // helper to parse an pair of In and Out endpoint descriptors. They must be consecutive
 tusb_error_t usbd_open_edpt_pair(uint8_t rhport, tusb_desc_endpoint_t const* p_desc_ep, uint8_t xfer_type, uint8_t* ep_out, uint8_t* ep_in);
 
-uint32_t usbd_control_xfer_st(uint8_t _rhport, uint8_t _dir, uint8_t* _buffer, uint16_t _len);
-
 /*------------------------------------------------------------------*/
 /* Other Helpers
  *------------------------------------------------------------------*/
diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c
index 7eeab1306..1e3dc4cba 100644
--- a/src/portable/nordic/nrf5x/dcd_nrf5x.c
+++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c
@@ -203,9 +203,7 @@ static void xact_control_start(void)
 
 bool dcd_control_xfer (uint8_t rhport, uint8_t dir, uint8_t * buffer, uint16_t length)
 {
-
   (void) rhport;
-  osal_semaphore_wait( _usbd_ctrl_sem, OSAL_TIMEOUT_CONTROL_XFER);
 
   if ( length )
   {
@@ -222,7 +220,9 @@ bool dcd_control_xfer (uint8_t rhport, uint8_t dir, uint8_t * buffer, uint16_t l
     NRF_USBD->EPIN[0].MAXCNT     = 0;
     // Status Phase also require Easy DMA has to be free as well !!!!
     NRF_USBD->TASKS_EP0STATUS = 1;
-    osal_semaphore_post(_usbd_ctrl_sem, false);
+
+    // The nRF doesn't interrupt on status transmit so we queue up a success response.
+    dcd_event_xfer_complete(0, 0, 0, DCD_XFER_SUCCESS, false);
   }
 
   return true;