rp2040: use TU endpoint conventions and remove redundant variables

3 files changed, 21 insertions, 26 deletions

diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c
index 95b0963a3..1e67726ac 100644
--- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c
+++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c
@@ -48,20 +48,21 @@
 // Init these in dcd_init
 static uint8_t *next_buffer_ptr;
 
-// Endpoints 0-15, direction 0 for out and 1 for in.
+// Endpoints 0-15, direction TUSB_DIR_OUT for out and TUSB_DIR_IN for in.
 static struct hw_endpoint hw_endpoints[16][2] = {0};
 
-static inline struct hw_endpoint *hw_endpoint_get_by_num(uint8_t num, uint8_t in)
+static inline struct hw_endpoint *hw_endpoint_get_by_num(uint8_t num, tusb_dir_t dir)
 {
-    return &hw_endpoints[num][in];
+    return &hw_endpoints[num][dir];
 }
 
 static struct hw_endpoint *hw_endpoint_get_by_addr(uint8_t ep_addr)
 {
     uint8_t num = tu_edpt_number(ep_addr);
-    uint8_t in = (ep_addr & TUSB_DIR_IN_MASK) ? 1 : 0;
-    return hw_endpoint_get_by_num(num, in);
+    tusb_dir_t dir = tu_edpt_dir(ep_addr);
+    return hw_endpoint_get_by_num(num, dir);
 }
+
 static void _hw_endpoint_alloc(struct hw_endpoint *ep)
 {
     uint size = TU_MIN(64, ep->wMaxPacketSize);
@@ -102,12 +103,10 @@ static void _hw_endpoint_alloc(struct hw_endpoint *ep)
 static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t ep_addr, uint wMaxPacketSize, uint8_t transfer_type)
 {
     uint8_t num = tu_edpt_number(ep_addr);
-    bool in = ep_addr & TUSB_DIR_IN_MASK;
+    tusb_dir_t dir = tu_edpt_dir(ep_addr);
     ep->ep_addr = ep_addr;
-    ep->in = in;
     // For device, IN is a tx transfer and OUT is an rx transfer
-    ep->rx = in == false;
-    ep->num = num;
+    ep->rx = (dir == TUSB_DIR_OUT);
     // Response to a setup packet on EP0 starts with pid of 1
     ep->next_pid = num == 0 ? 1u : 0u;
 
@@ -131,7 +130,7 @@ static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t ep_addr, uint wMax
     ep->transfer_type = transfer_type;
 
     // Every endpoint has a buffer control register in dpram
-    if (ep->in)
+    if (tu_edpt_dir(ep->ep_addr) == TUSB_DIR_IN)
     {
         ep->buffer_control = &usb_dpram->ep_buf_ctrl[num].in;
     }
@@ -143,7 +142,7 @@ static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t ep_addr, uint wMax
     // Clear existing buffer control state
     *ep->buffer_control = 0;
 
-    if (ep->num == 0)
+    if (tu_edpt_number(ep->ep_addr) == 0)
     {
         // EP0 has no endpoint control register because
         // the buffer offsets are fixed
@@ -155,7 +154,7 @@ static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t ep_addr, uint wMax
     else
     {
         // Set the endpoint control register (starts at EP1, hence num-1)
-        if (in)
+        if (dir == TUSB_DIR_IN)
         {
             ep->endpoint_control = &usb_dpram->ep_ctrl[num-1].in;
         }
@@ -259,10 +258,10 @@ static void ep0_0len_status(void)
 static void _hw_endpoint_stall(struct hw_endpoint *ep)
 {
     assert(!ep->stalled);
-    if (ep->num == 0)
+    if (tu_edpt_number(ep->ep_addr) == 0)
     {
         // A stall on EP0 has to be armed so it can be cleared on the next setup packet
-        usb_hw_set->ep_stall_arm = ep->in ? USB_EP_STALL_ARM_EP0_IN_BITS : USB_EP_STALL_ARM_EP0_OUT_BITS;
+        usb_hw_set->ep_stall_arm = (tu_edpt_dir(ep->ep_addr) == TUSB_DIR_IN) ? USB_EP_STALL_ARM_EP0_IN_BITS : USB_EP_STALL_ARM_EP0_OUT_BITS;
     }
     _hw_endpoint_buffer_control_set_mask32(ep, USB_BUF_CTRL_STALL);
     ep->stalled = true;
@@ -276,10 +275,10 @@ static void hw_endpoint_stall(uint8_t ep_addr)
 
 static void _hw_endpoint_clear_stall(struct hw_endpoint *ep)
 {
-    if (ep->num == 0)
+    if (tu_edpt_number(ep->ep_addr) == 0)
     {
         // Probably already been cleared but no harm
-        usb_hw_clear->ep_stall_arm = ep->in ? USB_EP_STALL_ARM_EP0_IN_BITS : USB_EP_STALL_ARM_EP0_OUT_BITS;
+        usb_hw_clear->ep_stall_arm = (tu_edpt_dir(ep->ep_addr) == TUSB_DIR_IN) ? USB_EP_STALL_ARM_EP0_IN_BITS : USB_EP_STALL_ARM_EP0_OUT_BITS;
     }
     _hw_endpoint_buffer_control_clear_mask32(ep, USB_BUF_CTRL_STALL);
     ep->stalled = false;
diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c
index 339297ad6..6c6911f2f 100644
--- a/src/portable/raspberrypi/rp2040/rp2040_usb.c
+++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c
@@ -84,7 +84,7 @@ void _hw_endpoint_buffer_control_update32(struct hw_endpoint *ep, uint32_t and_m
         value |= or_mask;
         if (or_mask & USB_BUF_CTRL_AVAIL) {
             if (*ep->buffer_control & USB_BUF_CTRL_AVAIL) {
-                panic("ep %d %s was already available", ep->num, ep_dir_string[ep->in]);
+                panic("ep %d %s was already available", tu_edpt_number(ep->ep_addr), ep_dir_string[tu_edpt_dir(ep->ep_addr)]);
             }
             *ep->buffer_control = value & ~USB_BUF_CTRL_AVAIL;
             // 12 cycle delay.. (should be good for 48*12Mhz = 576Mhz)
@@ -141,11 +141,11 @@ void _hw_endpoint_start_next_buffer(struct hw_endpoint *ep)
 void _hw_endpoint_xfer_start(struct hw_endpoint *ep, uint8_t *buffer, uint16_t total_len)
 {
     _hw_endpoint_lock_update(ep, 1);
-    pico_trace("Start transfer of total len %d on ep %d %s\n", total_len, ep->num, ep_dir_string[ep->in]);
+    pico_trace("Start transfer of total len %d on ep %d %s\n", total_len, tu_edpt_number(ep->ep_addr), ep_dir_string[tu_edpt_dir(ep->ep_addr)]);
     if (ep->active)
     {
         // TODO: Is this acceptable for interrupt packets?
-        pico_warn("WARN: starting new transfer on already active ep %d %s\n", ep->num, ep_dir_string[ep->in]);
+        pico_warn("WARN: starting new transfer on already active ep %d %s\n", tu_edpt_number(ep->ep_addr), ep_dir_string[tu_edpt_dir(ep->ep_addr)]);
 
         hw_endpoint_reset_transfer(ep);
     }
@@ -223,7 +223,7 @@ bool _hw_endpoint_xfer_continue(struct hw_endpoint *ep)
     // Part way through a transfer
     if (!ep->active)
     {
-        panic("Can't continue xfer on inactive ep %d %s", ep->num, ep_dir_string);
+        panic("Can't continue xfer on inactive ep %d %s", tu_edpt_number(ep->ep_addr), ep_dir_string);
     }
 
     // Update EP struct from hardware state
@@ -244,7 +244,7 @@ bool _hw_endpoint_xfer_continue(struct hw_endpoint *ep)
     if (ep->len == ep->total_len)
     {
         pico_trace("Completed transfer of %d bytes on ep %d %s\n",
-                   ep->len, ep->num, ep_dir_string[ep->in]);
+                   ep->len, tu_edpt_number(ep->ep_addr), ep_dir_string[tu_edpt_dir(ep->ep_addr)]);
         // Notify caller we are done so it can notify the tinyusb
         // stack
         _hw_endpoint_lock_update(ep, -1);
@@ -263,7 +263,7 @@ bool _hw_endpoint_xfer_continue(struct hw_endpoint *ep)
 void _hw_endpoint_xfer(struct hw_endpoint *ep, uint8_t *buffer, uint16_t total_len, bool start)
 {
     // Trace
-    pico_trace("hw_endpoint_xfer ep %d %s", ep->num, ep_dir_string[ep->in]);
+    pico_trace("hw_endpoint_xfer ep %d %s", tu_edpt_number(ep->ep_addr), ep_dir_string[tu_edpt_dir(ep->ep_addr)]);
     pico_trace(" total_len %d, start=%d\n", total_len, start);
 
     assert(ep->configured);
diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.h b/src/portable/raspberrypi/rp2040/rp2040_usb.h
index 7c3234e8d..40b845a88 100644
--- a/src/portable/raspberrypi/rp2040/rp2040_usb.h
+++ b/src/portable/raspberrypi/rp2040/rp2040_usb.h
@@ -42,10 +42,6 @@ struct hw_endpoint
 {
     // Is this a valid struct
     bool configured;
-    // EP direction
-    bool in;
-    // EP num (not including direction)
-    uint8_t num;
     
     // Transfer direction (i.e. IN is rx for host but tx for device)
     // allows us to common up transfer functions