diff options
| author | Ha Thach <[email protected]> | 2019-12-27 09:54:33 +0700 |
|---|---|---|
| committer | GitHub <[email protected]> | 2019-12-27 09:54:33 +0700 |
| commit | dda4c9a94b509238faa7b5ab5b9464c1d2e63ff0 (patch) | |
| tree | 619a4ca2cd67b98842a4773d1bbba094366c49c6 /src | |
| parent | 76b2c2a0017b49f8f1ef95734aa24a5b8e7d3f59 (diff) | |
| parent | 89f3ad59da093823cd48e6ca1ae2e09bb3e9309a (diff) | |
Merge pull request #248 from hathach/develop
fix #247
Diffstat (limited to 'src')
| -rw-r--r-- | src/portable/microchip/samd/dcd_samd.c | 15 |
1 files changed, 7 insertions, 8 deletions
diff --git a/src/portable/microchip/samd/dcd_samd.c b/src/portable/microchip/samd/dcd_samd.c index 5f904b313..148995520 100644 --- a/src/portable/microchip/samd/dcd_samd.c +++ b/src/portable/microchip/samd/dcd_samd.c @@ -42,8 +42,9 @@ static TU_ATTR_ALIGNED(4) uint8_t _setup_packet[8]; static inline void prepare_setup(void) { // Only make sure the EP0 OUT buffer is ready - // SETUP token doesn't check any other parameters sram_registers[0][0].ADDR.reg = (uint32_t) _setup_packet; + sram_registers[0][0].PCKSIZE.bit.MULTI_PACKET_SIZE = sizeof(_setup_packet); + sram_registers[0][0].PCKSIZE.bit.BYTE_COUNT = 0; } // Setup the control endpoint 0. @@ -292,8 +293,7 @@ void maybe_transfer_complete(void) { UsbDeviceDescBank* bank = &sram_registers[epnum][TUSB_DIR_IN]; uint16_t total_transfer_size = bank->PCKSIZE.bit.BYTE_COUNT; - uint8_t ep_addr = epnum | TUSB_DIR_IN_MASK; - dcd_event_xfer_complete(0, ep_addr, total_transfer_size, XFER_RESULT_SUCCESS, true); + dcd_event_xfer_complete(0, epnum | TUSB_DIR_IN_MASK, total_transfer_size, XFER_RESULT_SUCCESS, true); ep->EPINTFLAG.reg = USB_DEVICE_EPINTFLAG_TRCPT1; } @@ -301,17 +301,16 @@ void maybe_transfer_complete(void) { // Handle OUT completions if ((epintflag & USB_DEVICE_EPINTFLAG_TRCPT0) != 0) { + UsbDeviceDescBank* bank = &sram_registers[epnum][TUSB_DIR_OUT]; + uint16_t total_transfer_size = bank->PCKSIZE.bit.BYTE_COUNT; + // A SETUP token can occur immediately after an OUT packet // so make sure we have a valid buffer for the control endpoint. if (epnum == 0) { prepare_setup(); } - UsbDeviceDescBank* bank = &sram_registers[epnum][TUSB_DIR_OUT]; - uint16_t total_transfer_size = bank->PCKSIZE.bit.BYTE_COUNT; - - uint8_t ep_addr = epnum; - dcd_event_xfer_complete(0, ep_addr, total_transfer_size, XFER_RESULT_SUCCESS, true); + dcd_event_xfer_complete(0, epnum, total_transfer_size, XFER_RESULT_SUCCESS, true); ep->EPINTFLAG.reg = USB_DEVICE_EPINTFLAG_TRCPT0; } |