rename port to rhport for clarification

4 files changed, 83 insertions, 83 deletions

diff --git a/tinyusb/device/dcd_lpc_11uxx_13uxx.c b/tinyusb/device/dcd_lpc_11uxx_13uxx.c
index 92d2ded3e..08bfa07f8 100644
--- a/tinyusb/device/dcd_lpc_11uxx_13uxx.c
+++ b/tinyusb/device/dcd_lpc_11uxx_13uxx.c
@@ -164,28 +164,28 @@ static void queue_xfer_in_next_td(uint8_t ep_id);
 //--------------------------------------------------------------------+

 // CONTROLLER API

 //--------------------------------------------------------------------+

-void tusb_dcd_connect(uint8_t port)

+void tusb_dcd_connect(uint8_t rhport)

 {

-  (void) port;

+  (void) rhport;

   LPC_USB->DEVCMDSTAT |= CMDSTAT_DEVICE_CONNECT_MASK;

 }

 

-void tusb_dcd_set_config(uint8_t port, uint8_t config_num)

+void tusb_dcd_set_config(uint8_t rhport, uint8_t config_num)

 {

 

 }

 

-void tusb_dcd_set_address(uint8_t port, uint8_t dev_addr)

+void tusb_dcd_set_address(uint8_t rhport, uint8_t dev_addr)

 {

-  (void) port;

+  (void) rhport;

 

   LPC_USB->DEVCMDSTAT &= ~CMDSTAT_DEVICE_ADDR_MASK;

   LPC_USB->DEVCMDSTAT |= dev_addr;

 }

 

-bool tusb_dcd_init(uint8_t port)

+bool tusb_dcd_init(uint8_t rhport)

 {

-  (void) port;

+  (void) rhport;

 

   LPC_USB->EPLISTSTART  = (uint32_t) dcd_data.qhd;

   LPC_USB->DATABUFSTART = 0x20000000; // only SRAM1 & USB RAM can be used for transfer

@@ -250,7 +250,7 @@ static void endpoint_non_control_isr(uint32_t int_status)
         {

           edpt_hdl_t edpt_hdl =

           {

-              .port     = 0,

+              .rhport     = 0,

               .index      = ep_id,

               .class_code = dcd_data.class_code[ep_id]

           };

@@ -288,7 +288,7 @@ static void endpoint_control_isr(uint32_t int_status)
 

     if ( BIT_TEST_(dcd_data.current_ioc, ep_id) )

     {

-      edpt_hdl_t edpt_hdl = { .port = 0 };

+      edpt_hdl_t edpt_hdl = { .rhport = 0 };

 

       dcd_data.current_ioc = BIT_CLR_(dcd_data.current_ioc, ep_id);

 

@@ -298,9 +298,9 @@ static void endpoint_control_isr(uint32_t int_status)
   }

 }

 

-void hal_dcd_isr(uint8_t port)

+void hal_dcd_isr(uint8_t rhport)

 {

-  (void) port;

+  (void) rhport;

 

   uint32_t const int_enable = LPC_USB->INTEN;

   uint32_t const int_status = LPC_USB->INTSTAT & int_enable;

@@ -351,7 +351,7 @@ void hal_dcd_isr(uint8_t port)
   if ( BIT_TEST_(int_status, 0) && (dev_cmd_stat & CMDSTAT_SETUP_RECEIVED_MASK) )

   { // received control request from host

     // copy setup request & acknowledge so that the next setup can be received by hw

-    tusb_dcd_setup_received(port, (uint8_t*)&dcd_data.setup_request);

+    tusb_dcd_setup_received(rhport, (uint8_t*)&dcd_data.setup_request);

 

     // NXP control flowchart clear Active & Stall on both Control IN/OUT endpoints

     dcd_data.qhd[0][0].stall = dcd_data.qhd[1][0].stall = 0;

@@ -375,16 +375,16 @@ void hal_dcd_isr(uint8_t port)
 //--------------------------------------------------------------------+

 // CONTROL PIPE API

 //--------------------------------------------------------------------+

-void tusb_dcd_control_stall(uint8_t port)

+void tusb_dcd_control_stall(uint8_t rhport)

 {

-  (void) port;

+  (void) rhport;

   // TODO cannot able to STALL Control OUT endpoint !!!!! FIXME try some walk-around

   dcd_data.qhd[0][0].stall = dcd_data.qhd[1][0].stall = 1;

 }

 

-bool tusb_dcd_control_xfer(uint8_t port, tusb_dir_t dir, uint8_t * p_buffer, uint16_t length, bool int_on_complete)

+bool tusb_dcd_control_xfer(uint8_t rhport, tusb_dir_t dir, uint8_t * p_buffer, uint16_t length, bool int_on_complete)

 {

-  (void) port;

+  (void) rhport;

 

   // determine Endpoint where Data & Status phase occurred (IN or OUT)

   uint8_t const ep_data   = (dir == TUSB_DIR_IN) ? 1 : 0;

@@ -440,7 +440,7 @@ bool dcd_pipe_is_stalled(edpt_hdl_t edpt_hdl)
   return dcd_data.qhd[edpt_hdl.index][0].stall || dcd_data.qhd[edpt_hdl.index][1].stall;

 }

 

-void tusb_dcd_edpt_clear_stall(uint8_t port, uint8_t edpt_addr)

+void tusb_dcd_edpt_clear_stall(uint8_t rhport, uint8_t edpt_addr)

 {

   uint8_t ep_id = edpt_addr2phy(edpt_addr);

 //  uint8_t active_buffer = BIT_TEST_(LPC_USB->EPINUSE, ep_id) ? 1 : 0;

@@ -458,9 +458,9 @@ void tusb_dcd_edpt_clear_stall(uint8_t port, uint8_t edpt_addr)
   }

 }

 

-edpt_hdl_t tusb_dcd_edpt_open(uint8_t port, tusb_descriptor_endpoint_t const * p_endpoint_desc, uint8_t class_code)

+edpt_hdl_t tusb_dcd_edpt_open(uint8_t rhport, tusb_descriptor_endpoint_t const * p_endpoint_desc, uint8_t class_code)

 {

-  (void) port;

+  (void) rhport;

   edpt_hdl_t const null_handle = { 0 };

 

   if (p_endpoint_desc->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) return null_handle; // TODO not support ISO yet

@@ -485,7 +485,7 @@ edpt_hdl_t tusb_dcd_edpt_open(uint8_t port, tusb_descriptor_endpoint_t const * p
 

   return (edpt_hdl_t)

       {

-          .port     = 0,

+          .rhport     = 0,

           .index      = ep_id,

           .class_code = class_code

       };

diff --git a/tinyusb/device/usbd.c b/tinyusb/device/usbd.c
index f2b73e1de..97e6821ea 100644
--- a/tinyusb/device/usbd.c
+++ b/tinyusb/device/usbd.c
@@ -113,15 +113,15 @@ enum { USBD_CLASS_DRIVER_COUNT = sizeof(usbd_class_drivers) / sizeof(usbd_class_
 //--------------------------------------------------------------------+

 // INTERNAL OBJECT & FUNCTION DECLARATION

 //--------------------------------------------------------------------+

-static tusb_error_t proc_set_config_req(uint8_t port, uint8_t config_number);

-static uint16_t get_descriptor(uint8_t port, tusb_control_request_t const * const p_request, uint8_t const ** pp_buffer);

+static tusb_error_t proc_set_config_req(uint8_t rhport, uint8_t config_number);

+static uint16_t get_descriptor(uint8_t rhport, tusb_control_request_t const * const p_request, uint8_t const ** pp_buffer);

 

 //--------------------------------------------------------------------+

 // APPLICATION INTERFACE

 //--------------------------------------------------------------------+

-bool tud_n_mounted(uint8_t port)

+bool tud_n_mounted(uint8_t rhport)

 {

-    return usbd_devices[port].state == TUSB_DEVICE_STATE_CONFIGURED;

+    return usbd_devices[rhport].state == TUSB_DEVICE_STATE_CONFIGURED;

 }

 

 //--------------------------------------------------------------------+

@@ -140,7 +140,7 @@ typedef enum
 

 typedef struct ATTR_ALIGNED(4)

 {

-  uint8_t port;

+  uint8_t rhport;

   uint8_t event_id;

   uint8_t sub_event_id;

   uint8_t reserved;

@@ -172,7 +172,7 @@ static osal_queue_t usbd_queue_hdl;
 //--------------------------------------------------------------------+

 // IMPLEMENTATION

 //--------------------------------------------------------------------+

-static tusb_error_t proc_control_request_st(uint8_t port, tusb_control_request_t const * const p_request);

+static tusb_error_t proc_control_request_st(uint8_t rhport, tusb_control_request_t const * const p_request);

 static tusb_error_t usbd_main_stk(void);

 

 tusb_error_t usbd_init (void)

@@ -255,7 +255,7 @@ static tusb_error_t usbd_main_stk(void)
 

   if ( USBD_EVENTID_SETUP_RECEIVED == event.event_id )

   {

-    STASK_INVOKE( proc_control_request_st(event.port, &event.setup_received), error );

+    STASK_INVOKE( proc_control_request_st(event.rhport, &event.setup_received), error );

   }else if (USBD_EVENTID_XFER_DONE == event.event_id)

   {

     // Call class handling function. Those doest not own the endpoint should check and return

@@ -263,7 +263,7 @@ static tusb_error_t usbd_main_stk(void)
     {

       if ( usbd_class_drivers[class_code].xfer_cb )

       {

-        usbd_class_drivers[class_code].xfer_cb( event.port, event.xfer_done.ep_addr, (tusb_event_t) event.sub_event_id, event.xfer_done.xferred_byte);

+        usbd_class_drivers[class_code].xfer_cb( event.rhport, event.xfer_done.ep_addr, (tusb_event_t) event.sub_event_id, event.xfer_done.xferred_byte);

       }

     }

   }else if (USBD_EVENTID_SOF == event.event_id)

@@ -272,7 +272,7 @@ static tusb_error_t usbd_main_stk(void)
     {

       if ( usbd_class_drivers[class_code].sof )

       {

-        usbd_class_drivers[class_code].sof( event.port );

+        usbd_class_drivers[class_code].sof( event.rhport );

       }

     }

   }

@@ -287,7 +287,7 @@ static tusb_error_t usbd_main_stk(void)
 //--------------------------------------------------------------------+

 // CONTROL REQUEST

 //--------------------------------------------------------------------+

-tusb_error_t usbd_control_xfer_st(uint8_t port, tusb_dir_t dir, uint8_t * buffer, uint16_t length)

+tusb_error_t usbd_control_xfer_st(uint8_t rhport, tusb_dir_t dir, uint8_t * buffer, uint16_t length)

 {

   OSAL_SUBTASK_BEGIN

 

@@ -296,7 +296,7 @@ tusb_error_t usbd_control_xfer_st(uint8_t port, tusb_dir_t dir, uint8_t * buffer
   // Data

   if ( length )

   {

-    tusb_dcd_control_xfer(port, dir, buffer, length);

+    tusb_dcd_control_xfer(rhport, dir, buffer, length);

     osal_semaphore_wait( usbd_control_xfer_sem_hdl, 100, &error );

 

     STASK_ASSERT_STATUS( error );

@@ -305,12 +305,12 @@ tusb_error_t usbd_control_xfer_st(uint8_t port, tusb_dir_t dir, uint8_t * buffer
   // Status opposite direction with Zero Length

   // No need to wait for status to complete therefore

   // status phase must not call tusb_dcd_control_complete/tusb_dcd_xfer_complete

-  usbd_control_status(port, dir);

+  usbd_control_status(rhport, dir);

 

   OSAL_SUBTASK_END

 }

 

-static tusb_error_t proc_control_request_st(uint8_t port, tusb_control_request_t const * const p_request)

+static tusb_error_t proc_control_request_st(uint8_t rhport, tusb_control_request_t const * const p_request)

 {

   OSAL_SUBTASK_BEGIN

 

@@ -324,33 +324,33 @@ static tusb_error_t proc_control_request_st(uint8_t port, tusb_control_request_t
     if ( TUSB_REQ_GET_DESCRIPTOR == p_request->bRequest )

     {

       uint8_t  const * buffer = NULL;

-      uint16_t const   len    = get_descriptor(port, p_request, &buffer);

+      uint16_t const   len    = get_descriptor(rhport, p_request, &buffer);

 

       if ( len )

       {

-        STASK_INVOKE( usbd_control_xfer_st(port, p_request->bmRequestType_bit.direction, (uint8_t*) buffer, len ), error );

+        STASK_INVOKE( usbd_control_xfer_st(rhport, p_request->bmRequestType_bit.direction, (uint8_t*) buffer, len ), error );

       }else

       {

-        usbd_control_stall(port); // stall unsupported descriptor

+        usbd_control_stall(rhport); // stall unsupported descriptor

       }

     }

     else if ( TUSB_REQ_SET_ADDRESS == p_request->bRequest )

     {

-      tusb_dcd_set_address(port, (uint8_t) p_request->wValue);

-      usbd_devices[port].state = TUSB_DEVICE_STATE_ADDRESSED;

+      tusb_dcd_set_address(rhport, (uint8_t) p_request->wValue);

+      usbd_devices[rhport].state = TUSB_DEVICE_STATE_ADDRESSED;

 

       #ifndef NRF52840_XXAA // nrf52 auto handle set address, we must not return status

-      usbd_control_status(port, p_request->bmRequestType_bit.direction);

+      usbd_control_status(rhport, p_request->bmRequestType_bit.direction);

       #endif

     }

     else if ( TUSB_REQ_SET_CONFIGURATION == p_request->bRequest )

     {

-      proc_set_config_req(port, (uint8_t) p_request->wValue);

-      usbd_control_status(port, p_request->bmRequestType_bit.direction);

+      proc_set_config_req(rhport, (uint8_t) p_request->wValue);

+      usbd_control_status(rhport, p_request->bmRequestType_bit.direction);

     }

     else

     {

-      usbd_control_stall(port); // Stall unsupported request

+      usbd_control_stall(rhport); // Stall unsupported request

     }

   }

 

@@ -359,16 +359,16 @@ static tusb_error_t proc_control_request_st(uint8_t port, tusb_control_request_t
   {

     static uint8_t class_code;

 

-    class_code = usbd_devices[port].interface2class[ u16_low_u8(p_request->wIndex) ];

+    class_code = usbd_devices[rhport].interface2class[ u16_low_u8(p_request->wIndex) ];

 

     // TODO [Custom] TUSB_CLASS_DIAGNOSTIC, vendor etc ...

     if ( (class_code > 0) && (class_code < USBD_CLASS_DRIVER_COUNT) &&

          usbd_class_drivers[class_code].control_request_st )

     {

-      STASK_INVOKE( usbd_class_drivers[class_code].control_request_st(port, p_request), error );

+      STASK_INVOKE( usbd_class_drivers[class_code].control_request_st(rhport, p_request), error );

     }else

     {

-      usbd_control_stall(port); // Stall unsupported request

+      usbd_control_stall(rhport); // Stall unsupported request

     }

   }

 

@@ -378,18 +378,18 @@ static tusb_error_t proc_control_request_st(uint8_t port, tusb_control_request_t
   {

     if (TUSB_REQ_CLEAR_FEATURE == p_request->bRequest )

     {

-      tusb_dcd_edpt_clear_stall(port, u16_low_u8(p_request->wIndex) );

-      usbd_control_status(port, p_request->bmRequestType_bit.direction);

+      tusb_dcd_edpt_clear_stall(rhport, u16_low_u8(p_request->wIndex) );

+      usbd_control_status(rhport, p_request->bmRequestType_bit.direction);

     } else

     {

-      usbd_control_stall(port); // Stall unsupported request

+      usbd_control_stall(rhport); // Stall unsupported request

     }

   }

 

   //------------- Unsupported Request -------------//

   else

   {

-    usbd_control_stall(port); // Stall unsupported request

+    usbd_control_stall(rhport); // Stall unsupported request

   }

 

   OSAL_SUBTASK_END

@@ -397,10 +397,10 @@ static tusb_error_t proc_control_request_st(uint8_t port, tusb_control_request_t
 

 // TODO Host (windows) can get HID report descriptor before set configured

 // may need to open interface before set configured

-static tusb_error_t proc_set_config_req(uint8_t port, uint8_t config_number)

+static tusb_error_t proc_set_config_req(uint8_t rhport, uint8_t config_number)

 {

-  tusb_dcd_set_config(port, config_number);

-  usbd_devices[port].state = TUSB_DEVICE_STATE_CONFIGURED;

+  tusb_dcd_set_config(rhport, config_number);

+  usbd_devices[rhport].state = TUSB_DEVICE_STATE_CONFIGURED;

 

   //------------- parse configuration & open drivers -------------//

   uint8_t const * p_desc_config = tusbd_descriptor_pointers.p_configuration;

@@ -423,12 +423,12 @@ static tusb_error_t proc_set_config_req(uint8_t port, uint8_t config_number)
       class_index = p_desc_interface->bInterfaceClass;

 

       ASSERT( class_index != 0 && class_index < USBD_CLASS_DRIVER_COUNT && usbd_class_drivers[class_index].open != NULL, TUSB_ERROR_NOT_SUPPORTED_YET );

-      ASSERT( 0 == usbd_devices[port].interface2class[p_desc_interface->bInterfaceNumber], TUSB_ERROR_FAILED); // duplicate interface number TODO alternate setting

+      ASSERT( 0 == usbd_devices[rhport].interface2class[p_desc_interface->bInterfaceNumber], TUSB_ERROR_FAILED); // duplicate interface number TODO alternate setting

 

-      usbd_devices[port].interface2class[p_desc_interface->bInterfaceNumber] = class_index;

+      usbd_devices[rhport].interface2class[p_desc_interface->bInterfaceNumber] = class_index;

 

       uint16_t length=0;

-      ASSERT_STATUS( usbd_class_drivers[class_index].open( port, p_desc_interface, &length ) );

+      ASSERT_STATUS( usbd_class_drivers[class_index].open( rhport, p_desc_interface, &length ) );

 

       ASSERT( length >= sizeof(tusb_descriptor_interface_t), TUSB_ERROR_FAILED );

       p_desc += length;

@@ -436,12 +436,12 @@ static tusb_error_t proc_set_config_req(uint8_t port, uint8_t config_number)
   }

 

   // invoke callback

-  tud_mount_cb(port);

+  tud_mount_cb(rhport);

 

   return TUSB_ERROR_NONE;

 }

 

-static uint16_t get_descriptor(uint8_t port, tusb_control_request_t const * const p_request, uint8_t const ** pp_buffer)

+static uint16_t get_descriptor(uint8_t rhport, tusb_control_request_t const * const p_request, uint8_t const ** pp_buffer)

 {

   tusb_desc_type_t const desc_type = (tusb_desc_type_t) u16_high_u8(p_request->wValue);

   uint8_t const desc_index = u16_low_u8( p_request->wValue );

@@ -496,28 +496,28 @@ static uint16_t get_descriptor(uint8_t port, tusb_control_request_t const * cons
 //--------------------------------------------------------------------+

 // USBD-DCD Callback API

 //--------------------------------------------------------------------+

-void tusb_dcd_bus_event(uint8_t port, usbd_bus_event_type_t bus_event)

+void tusb_dcd_bus_event(uint8_t rhport, usbd_bus_event_type_t bus_event)

 {

   switch(bus_event)

   {

     case USBD_BUS_EVENT_RESET     :

-      memclr_(&usbd_devices[port], sizeof(usbd_device_info_t));

+      memclr_(&usbd_devices[rhport], sizeof(usbd_device_info_t));

       osal_queue_flush(usbd_queue_hdl);

       osal_semaphore_reset(usbd_control_xfer_sem_hdl);

       for (uint8_t class_code = TUSB_CLASS_AUDIO; class_code < USBD_CLASS_DRIVER_COUNT; class_code++)

       {

-        if ( usbd_class_drivers[class_code].close ) usbd_class_drivers[class_code].close( port );

+        if ( usbd_class_drivers[class_code].close ) usbd_class_drivers[class_code].close( rhport );

       }

 

       // invoke callback

-      tud_umount_cb(port);

+      tud_umount_cb(rhport);

     break;

 

     case USBD_BUS_EVENT_SOF:

     {

       usbd_task_event_t task_event =

       {

-          .port          = port,

+          .rhport          = rhport,

           .event_id        = USBD_EVENTID_SOF,

       };

       osal_queue_send(usbd_queue_hdl, &task_event);

@@ -527,18 +527,18 @@ void tusb_dcd_bus_event(uint8_t port, usbd_bus_event_type_t bus_event)
     case USBD_BUS_EVENT_UNPLUGGED : break;

 

     case USBD_BUS_EVENT_SUSPENDED:

-      usbd_devices[port].state = TUSB_DEVICE_STATE_SUSPENDED;

+      usbd_devices[rhport].state = TUSB_DEVICE_STATE_SUSPENDED;

     break;

 

     default: break;

   }

 }

 

-void tusb_dcd_setup_received(uint8_t port, uint8_t const* p_request)

+void tusb_dcd_setup_received(uint8_t rhport, uint8_t const* p_request)

 {

   usbd_task_event_t task_event =

   {

-      .port          = port,

+      .rhport          = rhport,

       .event_id        = USBD_EVENTID_SETUP_RECEIVED,

   };

 

@@ -546,11 +546,11 @@ void tusb_dcd_setup_received(uint8_t port, uint8_t const* p_request)
   osal_queue_send(usbd_queue_hdl, &task_event);

 }

 

-void tusb_dcd_xfer_complete(uint8_t port, uint8_t ep_addr, uint32_t xferred_bytes, bool succeeded)

+void tusb_dcd_xfer_complete(uint8_t rhport, uint8_t ep_addr, uint32_t xferred_bytes, bool succeeded)

 {

   if (ep_addr == 0 )

   {

-    (void) port;

+    (void) rhport;

     (void) xferred_bytes;

     (void) succeeded;

 

@@ -560,7 +560,7 @@ void tusb_dcd_xfer_complete(uint8_t port, uint8_t ep_addr, uint32_t xferred_byte
   {

     usbd_task_event_t task_event =

     {

-        .port         = port,

+        .rhport         = rhport,

         .event_id     = USBD_EVENTID_XFER_DONE,

         .sub_event_id = succeeded ? TUSB_EVENT_XFER_COMPLETE : TUSB_EVENT_XFER_ERROR

     };

diff --git a/tinyusb/device/usbd.h b/tinyusb/device/usbd.h
index 326e74806..ae8ca3a8c 100644
--- a/tinyusb/device/usbd.h
+++ b/tinyusb/device/usbd.h
@@ -72,11 +72,11 @@ extern tusbd_descriptor_pointer_t tusbd_descriptor_pointers;
 

 typedef struct {

   void (* init) (void);

-  tusb_error_t (* open)(uint8_t port, tusb_descriptor_interface_t const * desc_intf, uint16_t* p_length);

-  tusb_error_t (* control_request_st) (uint8_t port, tusb_control_request_t const *);

-  tusb_error_t (* xfer_cb) (uint8_t port, uint8_t ep_addr, tusb_event_t, uint32_t);

+  tusb_error_t (* open)(uint8_t rhport, tusb_descriptor_interface_t const * desc_intf, uint16_t* p_length);

+  tusb_error_t (* control_request_st) (uint8_t rhport, tusb_control_request_t const *);

+  tusb_error_t (* xfer_cb) (uint8_t rhport, uint8_t ep_addr, tusb_event_t, uint32_t);

 //  void (* routine)(void);

-  void (* sof)(uint8_t port);

+  void (* sof)(uint8_t rhport);

   void (* close) (uint8_t);

 } usbd_class_driver_t;

 

@@ -94,7 +94,7 @@ typedef struct {
 //--------------------------------------------------------------------+

 // APPLICATION API

 //--------------------------------------------------------------------+

-bool tud_n_mounted(uint8_t port);

+bool tud_n_mounted(uint8_t rhport);

 

 static inline bool tud_mounted(void)

 {

@@ -104,18 +104,18 @@ static inline bool tud_mounted(void)
 

 /*------------- Callback -------------*/

 /** \brief 			Callback function that will be invoked device is mounted (configured) by USB host

- * \param[in] 	port USB Controller ID of the interface

+ * \param[in] 	rhport USB Controller ID of the interface

  * \note        This callback should be used by Application to \b set-up application data

  */

-void tud_mount_cb(uint8_t port);

+void tud_mount_cb(uint8_t rhport);

 

 /** \brief 			Callback function that will be invoked when device is unmounted (bus reset/unplugged)

- * \param[in] 	port USB Controller ID of the interface

+ * \param[in] 	rhport USB Controller ID of the interface

  * \note        This callback should be used by Application to \b tear-down application data

  */

-void tud_umount_cb(uint8_t port);

+void tud_umount_cb(uint8_t rhport);

 

-//void tud_device_suspended_cb(uint8_t port);

+//void tud_device_suspended_cb(uint8_t rhport);

 

 #ifdef __cplusplus

  }

diff --git a/tinyusb/device/usbd_pvt.h b/tinyusb/device/usbd_pvt.h
index d68f5c9fc..366fae3e7 100644
--- a/tinyusb/device/usbd_pvt.h
+++ b/tinyusb/device/usbd_pvt.h
@@ -50,19 +50,19 @@ tusb_error_t usbd_init(void);
 void         usbd_task( void* param);
 
 // Carry out Data and Status stage of control transfer
-tusb_error_t usbd_control_xfer_st(uint8_t port, tusb_dir_t dir, uint8_t * buffer, uint16_t length);
+tusb_error_t usbd_control_xfer_st(uint8_t rhport, tusb_dir_t dir, uint8_t * buffer, uint16_t length);
 
 // Return Status of control transfer
 // Note dir is value of direction bit in setup packet (aka DATA stage direction)
-static inline bool usbd_control_status(uint8_t port, tusb_dir_t dir)
+static inline bool usbd_control_status(uint8_t rhport, tusb_dir_t dir)
 {
   // status direction is reversed to one in the setup packet
-  return tusb_dcd_control_xfer(port, 1-dir, NULL, 0);
+  return tusb_dcd_control_xfer(rhport, 1-dir, NULL, 0);
 }
 
-static inline void usbd_control_stall(uint8_t port)
+static inline void usbd_control_stall(uint8_t rhport)
 {
-  tusb_dcd_edpt_stall(port, 0);
+  tusb_dcd_edpt_stall(rhport, 0);
 }