rename OPT_MODE_

5 files changed, 25 insertions, 25 deletions

diff --git a/tinyusb/device/usbd.c b/tinyusb/device/usbd.c
index c11d1fe42..8929212a7 100644
--- a/tinyusb/device/usbd.c
+++ b/tinyusb/device/usbd.c
@@ -200,11 +200,11 @@ static tusb_error_t usbd_main_st(void);
 

 tusb_error_t usbd_init (void)

 {

-  #if (CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_DEVICE)

+  #if (CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_DEVICE)

   dcd_init(0);

   #endif

 

-  #if (CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_DEVICE)

+  #if (CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_DEVICE)

   dcd_init(1);

   #endif

 

diff --git a/tinyusb/host/ehci/ehci.c b/tinyusb/host/ehci/ehci.c
index 2321cedcc..6ca89b837 100644
--- a/tinyusb/host/ehci/ehci.c
+++ b/tinyusb/host/ehci/ehci.c
@@ -61,7 +61,7 @@ CFG_TUSB_ATTR_USBRAM STATIC_VAR ehci_data_t ehci_data;
 

 #if EHCI_PERIODIC_LIST

 

-  #if (CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_HOST)

+  #if (CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_HOST)

   CFG_TUSB_ATTR_USBRAM ATTR_ALIGNED(4096) STATIC_VAR ehci_link_t period_frame_list0[EHCI_FRAMELIST_SIZE];

 

     #ifndef __ICCARM__ // IAR cannot able to determine the alignment with datalignment pragma

@@ -69,7 +69,7 @@ CFG_TUSB_ATTR_USBRAM STATIC_VAR ehci_data_t ehci_data;
     #endif

   #endif

 

-  #if (CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_HOST)

+  #if (CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_HOST)

   CFG_TUSB_ATTR_USBRAM ATTR_ALIGNED(4096) STATIC_VAR ehci_link_t period_frame_list1[EHCI_FRAMELIST_SIZE];

 

     #ifndef __ICCARM__ // IAR cannot able to determine the alignment with datalignment pragma

@@ -133,11 +133,11 @@ tusb_error_t hcd_init(void)
   //------------- Data Structure init -------------//

   memclr_(&ehci_data, sizeof(ehci_data_t));

 

-  #if (CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_HOST)

+  #if (CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_HOST)

     ASSERT_ERR (hcd_controller_init(0));

   #endif

 

-  #if (CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_HOST)

+  #if (CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_HOST)

     ASSERT_ERR (hcd_controller_init(1));

   #endif

 

@@ -794,12 +794,12 @@ static inline ehci_link_t* get_period_frame_list(uint8_t hostid)
 {

   switch(hostid)

   {

-#if (CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_HOST)

+#if (CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_HOST)

     case 0:

       return period_frame_list0;

 #endif

 

-#if (CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_HOST)

+#if (CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_HOST)

     case 1:

       return period_frame_list1;

 #endif

@@ -811,7 +811,7 @@ static inline ehci_link_t* get_period_frame_list(uint8_t hostid)
 

 static inline uint8_t hostid_to_data_idx(uint8_t hostid)

 {

-  #if (CONTROLLER_HOST_NUMBER == 1) && (CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_HOST)

+  #if (CONTROLLER_HOST_NUMBER == 1) && (CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_HOST)

     (void) hostid;

     return 0;

   #else

diff --git a/tinyusb/portable/nxp/lpc43xx_lpc18xx/dcd_lpc43xx.c b/tinyusb/portable/nxp/lpc43xx_lpc18xx/dcd_lpc43xx.c
index 79547e6e8..460e305ac 100644
--- a/tinyusb/portable/nxp/lpc43xx_lpc18xx/dcd_lpc43xx.c
+++ b/tinyusb/portable/nxp/lpc43xx_lpc18xx/dcd_lpc43xx.c
@@ -70,11 +70,11 @@ typedef struct {
 extern ATTR_WEAK dcd_data_t dcd_data0;

 extern ATTR_WEAK dcd_data_t dcd_data1;

 

-#if (CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_DEVICE)

+#if (CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_DEVICE)

 CFG_TUSB_ATTR_USBRAM ATTR_ALIGNED(2048) STATIC_VAR dcd_data_t dcd_data0;

 #endif

 

-#if (CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_DEVICE)

+#if (CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_DEVICE)

 CFG_TUSB_ATTR_USBRAM ATTR_ALIGNED(2048) STATIC_VAR dcd_data_t dcd_data1;

 #endif

 

diff --git a/tinyusb/portable/nxp/lpc43xx_lpc18xx/hal_lpc43xx.c b/tinyusb/portable/nxp/lpc43xx_lpc18xx/hal_lpc43xx.c
index 799b6432a..80e26cb42 100644
--- a/tinyusb/portable/nxp/lpc43xx_lpc18xx/hal_lpc43xx.c
+++ b/tinyusb/portable/nxp/lpc43xx_lpc18xx/hal_lpc43xx.c
@@ -93,7 +93,7 @@ bool tusb_hal_init(void)
   // reset controller & set role

   hal_controller_reset(0);

 

-  #if CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_HOST

+  #if CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_HOST

     LPC_USB0->USBMODE_H = LPC43XX_USBMODE_HOST | (LPC43XX_USBMODE_VBUS_HIGH << 5);

   #else // TODO OTG

     LPC_USB0->USBMODE_D = LPC43XX_USBMODE_DEVICE;

@@ -111,11 +111,11 @@ bool tusb_hal_init(void)
 

   /* connect CLK_USB1 to 60 MHz clock */

   CGU_EntityConnect(CGU_CLKSRC_PLL1, CGU_BASE_USB1); /* FIXME Run base BASE_USB1_CLK clock from PLL1 (assume PLL1 is 60 MHz, no division required) */

-  LPC_SCU->SFSUSB = (CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_HOST) ? 0x16 : 0x12; // enable USB1 with on-chip FS PHY

+  LPC_SCU->SFSUSB = (CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_HOST) ? 0x16 : 0x12; // enable USB1 with on-chip FS PHY

 

   hal_controller_reset(1);

 

-  #if CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_HOST

+  #if CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_HOST

     LPC_USB1->USBMODE_H = LPC43XX_USBMODE_HOST | (LPC43XX_USBMODE_VBUS_HIGH << 5);

   #else // TODO OTG

     LPC_USB1->USBMODE_D = LPC43XX_USBMODE_DEVICE;

diff --git a/tinyusb/tusb_option.h b/tinyusb/tusb_option.h
index 62b3a1a72..060850f82 100644
--- a/tinyusb/tusb_option.h
+++ b/tinyusb/tusb_option.h
@@ -60,7 +60,7 @@
 /** @} */

 

 /** \defgroup group_supported_os Supported RTOS

- * \brief \ref CFG_TUSB_OS must be defined to one of these

+ *  \ref CFG_TUSB_OS must be defined to one of these

  *  @{ */

 #define OPT_OS_NONE       1 ///< No RTOS is used

 #define OPT_OS_FREERTOS   2 ///< FreeRTOS is used

@@ -83,32 +83,32 @@
 /** \defgroup group_mode Controller Mode Selection

  * \brief CFG_TUSB_CONTROLLER_N_MODE must be defined with these

  *  @{ */

-#define TUSB_MODE_HOST    0x02 ///< Host Mode

-#define TUSB_MODE_DEVICE  0x01 ///< Device Mode

-#define TUSB_MODE_NONE    0x00 ///< Disabled

+#define OPT_MODE_HOST    0x02 ///< Host Mode

+#define OPT_MODE_DEVICE  0x01 ///< Device Mode

+#define OPT_MODE_NONE    0x00 ///< Disabled

 /** @} */

 

 #ifndef CFG_TUSB_CONTROLLER_0_MODE

-  #define CFG_TUSB_CONTROLLER_0_MODE TUSB_MODE_NONE

+  #define CFG_TUSB_CONTROLLER_0_MODE OPT_MODE_NONE

 #endif

 

 #ifndef CFG_TUSB_CONTROLLER_1_MODE

-  #define CFG_TUSB_CONTROLLER_1_MODE TUSB_MODE_NONE

+  #define CFG_TUSB_CONTROLLER_1_MODE OPT_MODE_NONE

 #endif

 

 #define CONTROLLER_HOST_NUMBER (\

-    ((CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_HOST) ? 1 : 0) + \

-    ((CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_HOST) ? 1 : 0))

+    ((CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_HOST) ? 1 : 0) + \

+    ((CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_HOST) ? 1 : 0))

 

 #define CONTROLLER_DEVICE_NUMBER (\

-    ((CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_DEVICE) ? 1 : 0) + \

-    ((CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_DEVICE) ? 1 : 0))

+    ((CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_DEVICE) ? 1 : 0) + \

+    ((CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_DEVICE) ? 1 : 0))

 

 #define MODE_HOST_SUPPORTED   (CONTROLLER_HOST_NUMBER > 0)

 #define MODE_DEVICE_SUPPORTED (CONTROLLER_DEVICE_NUMBER > 0)

 

 #if !MODE_HOST_SUPPORTED && !MODE_DEVICE_SUPPORTED

-  #error please configure at least 1 CFG_TUSB_CONTROLLER_N_MODE to TUSB_MODE_HOST and/or TUSB_MODE_DEVICE

+  #error please configure at least 1 CFG_TUSB_CONTROLLER_N_MODE to OPT_MODE_HOST and/or OPT_MODE_DEVICE

 #endif

 

 //--------------------------------------------------------------------+