diff options
| -rw-r--r-- | src/device/dcd.h | 26 | ||||
| -rw-r--r-- | src/device/usbd.c | 12 |
2 files changed, 27 insertions, 11 deletions
diff --git a/src/device/dcd.h b/src/device/dcd.h index f005e9620..a4006ae0c 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -20,19 +20,27 @@ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ +// Bus reset is reported as two edges. BUS_RESET_START is optional: a controller that +// cannot tell the edges apart emits only BUS_RESET_END, which stays self-sufficient (it +// performs the full teardown with or without a preceding START). Emit START when reset +// signaling is detected - the link is unusable and the speed is not negotiated yet - so +// the stack stops using endpoints immediately instead of at the end of the reset. typedef enum { - DCD_EVENT_INVALID = 0, // 0 - DCD_EVENT_BUS_RESET, // 1 - DCD_EVENT_UNPLUGGED, // 2 - DCD_EVENT_SOF, // 3 - DCD_EVENT_SUSPEND, // 4 TODO LPM Sleep L1 support - DCD_EVENT_RESUME, // 5 - DCD_EVENT_SETUP_RECEIVED, // 6 - DCD_EVENT_XFER_COMPLETE, // 7 - USBD_EVENT_FUNC_CALL, // 8 Not an DCD event, just a convenient way to defer ISR function + DCD_EVENT_INVALID = 0, // 0 + DCD_EVENT_BUS_RESET_START, // 1 + DCD_EVENT_BUS_RESET_END, // 2 with negotiated speed + DCD_EVENT_UNPLUGGED, // 3 + DCD_EVENT_SOF, // 4 + DCD_EVENT_SUSPEND, // 5 TODO LPM Sleep L1 support + DCD_EVENT_RESUME, // 6 + DCD_EVENT_SETUP_RECEIVED, // 7 + DCD_EVENT_XFER_COMPLETE, // 8 + USBD_EVENT_FUNC_CALL, // 9 Not an DCD event, just a convenient way to defer ISR function DCD_EVENT_COUNT } dcd_eventid_t; +#define DCD_EVENT_BUS_RESET DCD_EVENT_BUS_RESET_END // backward compatibility + typedef struct TU_ATTR_ALIGNED(4) { uint8_t rhport; uint8_t event_id; diff --git a/src/device/usbd.c b/src/device/usbd.c index f5c3046d6..7215a8dc5 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -456,7 +456,8 @@ TU_ATTR_WEAK bool dcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL static char const *const _usbd_event_str[DCD_EVENT_COUNT] = { "Invalid", - "Bus Reset", + "Bus Reset Start", + "Bus Reset End", "Unplugged", "SOF", "Suspend", @@ -697,8 +698,15 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) { #endif switch (event.event_id) { - case DCD_EVENT_BUS_RESET: + case DCD_EVENT_BUS_RESET_START: + TU_LOG_USBD("\r\n"); + usbd_reset(event.rhport); + break; + + case DCD_EVENT_BUS_RESET_END: TU_LOG_USBD(": %s Speed\r\n", tu_str_speed[event.bus_reset.speed]); + // TODO a DCD that reports both edges pays for two teardowns: track a per-rhport + // "start seen" flag and skip this reset, keeping it for the single-event DCDs. usbd_reset(event.rhport); _usbd_dev.speed = event.bus_reset.speed; break; |