diff options
25 files changed, 431 insertions, 177 deletions
diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 7aecb8386..f63f637b1 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -34,6 +34,7 @@ jobs: # Alphabetical order - 'broadcom_32bit' - 'imxrt' + - 'kinetis_k32 kinetis_kl' - 'lpc15 lpc18' - 'lpc54 lpc55' - 'mm32 msp432e4' diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index b3f3f41d3..a5d055893 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -253,6 +253,7 @@ Kinetis ^^^^^^^ - `Freedom FRDM-KL25Z <https://www.nxp.com/design/development-boards/freedom-development-boards/mcu-boards/freedom-development-platform-for-kinetis-kl14-kl15-kl24-kl25-mcus:FRDM-KL25Z>`__ +- `Freedom FRDM-K32L2A4S <https://www.nxp.com/design/development-boards/freedom-development-boards/mcu-boards/nxp-freedom-platform-for-k32-l2a-mcus:FRDM-K32L2A4S>`__ - `Freedom FRDM-K32L2B3 <https://www.nxp.com/design/development-boards/freedom-development-boards/mcu-boards/nxp-freedom-development-platform-for-k32-l2b-mcus:FRDM-K32L2B3>`__ - `KUIIC <https://github.com/nxf58843/kuiic>`__ diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt index b0e5235ac..77c7ec63a 100644 --- a/examples/device/net_lwip_webserver/skip.txt +++ b/examples/device/net_lwip_webserver/skip.txt @@ -8,3 +8,4 @@ mcu:MKL25ZXX family:broadcom_64bit family:broadcom_32bit board:curiosity_nano +board:frdm_kl25z diff --git a/hw/bsp/board_mcu.h b/hw/bsp/board_mcu.h index b34197e6c..cd195a19b 100644 --- a/hw/bsp/board_mcu.h +++ b/hw/bsp/board_mcu.h @@ -39,15 +39,15 @@ //--------------------------------------------------------------------+ // Include order follows OPT_MCU_ number -#if CFG_TUSB_MCU == OPT_MCU_LPC11UXX || CFG_TUSB_MCU == OPT_MCU_LPC13XX || \ - CFG_TUSB_MCU == OPT_MCU_LPC15XX || CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || \ - CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC18XX || \ - CFG_TUSB_MCU == OPT_MCU_LPC40XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX +#if TU_CHECK_MCU(OPT_MCU_LPC11UXX, OPT_MCU_LPC13XX, OPT_MCU_LPC15XX) || \ + TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC18XX) || \ + TU_CHECK_MCU(OPT_MCU_LPC40XX, OPT_MCU_LPC43XX) #include "chip.h" -#elif CFG_TUSB_MCU == OPT_MCU_LPC51UXX || CFG_TUSB_MCU == OPT_MCU_LPC54XXX || \ - CFG_TUSB_MCU == OPT_MCU_LPC55XX || CFG_TUSB_MCU == OPT_MCU_MKL25ZXX || \ - CFG_TUSB_MCU == OPT_MCU_K32L2BXX +#elif TU_CHECK_MCU(OPT_MCU_LPC51UXX, OPT_MCU_LPC54XXX, OPT_MCU_LPC55XX) + #include "fsl_device_registers.h" + +#elif TU_CHECK_MCU(OPT_MCU_KINETIS_KL, OPT_MCU_KINETIS_K32) #include "fsl_device_registers.h" #elif CFG_TUSB_MCU == OPT_MCU_NRF5X diff --git a/hw/bsp/frdm_k32l2b/board.mk b/hw/bsp/frdm_k32l2b/board.mk deleted file mode 100644 index feb0a25f4..000000000 --- a/hw/bsp/frdm_k32l2b/board.mk +++ /dev/null @@ -1,51 +0,0 @@ -SDK_DIR = hw/mcu/nxp/mcux-sdk -DEPS_SUBMODULES += $(SDK_DIR) - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -DCPU_K32L2B31VLH0A \ - -DCFG_TUSB_MCU=OPT_MCU_K32L2BXX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls - -MCU_DIR = $(SDK_DIR)/devices/K32L2B31A - -# All source paths should be relative to the top level. -LD_FILE = $(MCU_DIR)/gcc/K32L2B31xxxxA_flash.ld - -SRC_C += \ - src/portable/nxp/khci/dcd_khci.c \ - $(MCU_DIR)/system_K32L2B31A.c \ - $(MCU_DIR)/project_template/clock_config.c \ - $(MCU_DIR)/drivers/fsl_clock.c \ - $(SDK_DIR)/drivers/gpio/fsl_gpio.c \ - $(SDK_DIR)/drivers/lpuart/fsl_lpuart.c - -INC += \ - $(TOP)/hw/bsp/$(BOARD) \ - $(TOP)/$(SDK_DIR)/CMSIS/Include \ - $(TOP)/$(SDK_DIR)/drivers/smc \ - $(TOP)/$(SDK_DIR)/drivers/common \ - $(TOP)/$(SDK_DIR)/drivers/gpio \ - $(TOP)/$(SDK_DIR)/drivers/port \ - $(TOP)/$(SDK_DIR)/drivers/lpuart \ - $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/drivers \ - $(TOP)/$(MCU_DIR)/project_template \ - -SRC_S += $(MCU_DIR)/gcc/startup_K32L2B31A.S - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = MKL25Z128xxx4 - -# For flash-pyocd target -PYOCD_TARGET = K32L2B - -# flash using pyocd -flash: flash-pyocd diff --git a/hw/bsp/frdm_kl25z/board.mk b/hw/bsp/frdm_kl25z/board.mk deleted file mode 100644 index fd616f7ed..000000000 --- a/hw/bsp/frdm_kl25z/board.mk +++ /dev/null @@ -1,52 +0,0 @@ -SDK_DIR = hw/mcu/nxp/nxp_sdk -DEPS_SUBMODULES += $(SDK_DIR) - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -DCPU_MKL25Z128VLK4 \ - -DCFG_TUSB_MCU=OPT_MCU_MKL25ZXX \ - -DCFG_EXAMPLE_VIDEO_READONLY - -LDFLAGS += \ - -Wl,--defsym,__stack_size__=0x400 \ - -Wl,--defsym,__heap_size__=0 - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=format -Wno-error=redundant-decls - -MCU_DIR = $(SDK_DIR)/devices/MKL25Z4 - -# All source paths should be relative to the top level. -LD_FILE = $(MCU_DIR)/gcc/MKL25Z128xxx4_flash.ld - -SRC_C += \ - src/portable/nxp/khci/dcd_khci.c \ - src/portable/nxp/khci/hcd_khci.c \ - $(MCU_DIR)/system_MKL25Z4.c \ - $(MCU_DIR)/project_template/clock_config.c \ - $(MCU_DIR)/drivers/fsl_clock.c \ - $(MCU_DIR)/drivers/fsl_gpio.c \ - $(MCU_DIR)/drivers/fsl_lpsci.c - -INC += \ - $(TOP)/hw/bsp/$(BOARD) \ - $(TOP)/$(SDK_DIR)/CMSIS/Include \ - $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/drivers \ - $(TOP)/$(MCU_DIR)/project_template \ - -SRC_S += $(MCU_DIR)/gcc/startup_MKL25Z4.S - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = MKL25Z128xxx4 - -# For flash-pyocd target -PYOCD_TARGET = mkl25zl128 - -# flash using pyocd -flash: flash-pyocd diff --git a/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.h b/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.h new file mode 100644 index 000000000..b1f38c997 --- /dev/null +++ b/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.h @@ -0,0 +1,58 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "fsl_device_registers.h" + +// LED +// The Red LED is on PTE29. +// The Green LED is on PTC4. +// The Blue LED is on PTE31. +#define LED_PIN_CLOCK kCLOCK_PortC +#define LED_GPIO GPIOC +#define LED_PORT PORTC +#define LED_PIN 4 +#define LED_STATE_ON 0 + +// SW3 button1 +#define BUTTON_PIN_CLOCK kCLOCK_PortE +#define BUTTON_GPIO GPIOE +#define BUTTON_PORT PORTE +#define BUTTON_PIN 4 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART0 +#define UART_PIN_CLOCK kCLOCK_PortB +#define UART_PIN_GPIO GPIOB +#define UART_PIN_PORT PORTB +#define UART_PIN_RX 16u +#define UART_PIN_TX 17u + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.mk b/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.mk new file mode 100644 index 000000000..d96ab58b8 --- /dev/null +++ b/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.mk @@ -0,0 +1,26 @@ +MCU = K32L2A41A + +CFLAGS += \ + -mcpu=cortex-m0plus \ + -DCPU_K32L2A41VLH1A \ + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls -Wno-error=cast-qual + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/K32L2A41xxxxA_flash.ld + +SRC_C += \ + $(MCU_DIR)/project_template/clock_config.c \ + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = K32L2A41xxxxA + +# For flash-pyocd target +PYOCD_TARGET = K32L2A + +# flash using pyocd +flash: flash-pyocd diff --git a/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/frdm_k32l2a4s.c b/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/frdm_k32l2a4s.c new file mode 100644 index 000000000..80830163b --- /dev/null +++ b/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/frdm_k32l2a4s.c @@ -0,0 +1,171 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * Copyright (c) 2020, Koji Kitayama + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" +#include "board.h" +#include "fsl_gpio.h" +#include "fsl_port.h" +#include "fsl_clock.h" +#include "fsl_lpuart.h" + +#include "clock_config.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + tud_int_handler(0); +} + +void board_init(void) +{ + /* Enable port clocks for UART/LED/Button pins */ + CLOCK_EnableClock(UART_PIN_CLOCK); + CLOCK_EnableClock(LED_PIN_CLOCK); + CLOCK_EnableClock(BUTTON_PIN_CLOCK); + + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0 }; + GPIO_PinInit(LED_GPIO, LED_PIN, &led_config); + PORT_SetPinMux(LED_PORT, LED_PIN, kPORT_MuxAsGpio); + + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; + GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); + const port_pin_config_t BUTTON_CFG = { + kPORT_PullUp, + kPORT_FastSlewRate, + kPORT_PassiveFilterDisable, + kPORT_OpenDrainDisable, + kPORT_LowDriveStrength, + kPORT_MuxAsGpio, + kPORT_UnlockRegister + }; + PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); + + /* + Enable LPUART0 clock and configure port pins. + FIR clock is being used so the USB examples work. + */ + PCC_LPUART0 = 0U; /* Clock must be off to set PCS */ + PCC_LPUART0 = PCC_CLKCFG_PCS( 3U ); /* Select the clock. 1:OSCCLK/Bus Clock, 2:Slow IRC, 3: Fast IRC, 6: System PLL */ + PCC_LPUART0 |= PCC_CLKCFG_CGC( 1U ); /* Enable LPUART */ + + /* PORTB16 (pin 62) is configured as LPUART0_RX */ + gpio_pin_config_t const lpuart_config_rx = { kGPIO_DigitalInput, 0 }; + GPIO_PinInit(UART_PIN_GPIO, UART_PIN_RX, &lpuart_config_rx); + const port_pin_config_t UART_CFG = { + kPORT_PullUp, + kPORT_FastSlewRate, + kPORT_PassiveFilterDisable, + kPORT_OpenDrainDisable, + kPORT_LowDriveStrength, + kPORT_MuxAsGpio, + kPORT_UnlockRegister + }; + PORT_SetPinConfig(UART_PIN_PORT, UART_PIN_RX, &UART_CFG); + PORT_SetPinMux( UART_PIN_PORT, UART_PIN_RX, kPORT_MuxAlt3); + + /* PORTB17 (pin 63) is configured as LPUART0_TX */ + gpio_pin_config_t const lpuart_config_tx = { kGPIO_DigitalOutput, 0 }; + GPIO_PinInit( UART_PIN_GPIO, UART_PIN_TX, &lpuart_config_tx); + PORT_SetPinMux( UART_PIN_PORT, UART_PIN_TX, kPORT_MuxAlt3); + + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + lpuart_config_t uart_config; + LPUART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPUART_Init(UART_PORT, &uart_config, CLOCK_GetFreq(kCLOCK_ScgFircClk)); + + // USB + CLOCK_EnableUsbfs0Clock(kCLOCK_IpSrcFircAsync, 48000000U); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(LED_GPIO, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ +#if 0 /* + Use this version if want the LED to blink during BOARD=board_test, + without having to hit a key. + */ + if( 0U != (kLPUART_RxDataRegFullFlag & LPUART_GetStatusFlags( UART_PORT )) ) + { + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; + } + + return( 0 ); +#else /* Wait for 'len' characters to come in */ + + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; + +#endif +} + +int board_uart_write(void const * buf, int len) +{ + LPUART_WriteBlocking(UART_PORT, (uint8_t const*) buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/frdm_k32l2b/board.h b/hw/bsp/kinetis_k32/boards/frdm_k32l2b/board.h index 8d21fdcd4..8d21fdcd4 100644 --- a/hw/bsp/frdm_k32l2b/board.h +++ b/hw/bsp/kinetis_k32/boards/frdm_k32l2b/board.h diff --git a/hw/bsp/kinetis_k32/boards/frdm_k32l2b/board.mk b/hw/bsp/kinetis_k32/boards/frdm_k32l2b/board.mk new file mode 100644 index 000000000..5f8ecbfe4 --- /dev/null +++ b/hw/bsp/kinetis_k32/boards/frdm_k32l2b/board.mk @@ -0,0 +1,26 @@ +MCU = K32L2B31A + +CFLAGS += \ + -mcpu=cortex-m0plus \ + -DCPU_K32L2B31VLH0A \ + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/K32L2B31xxxxA_flash.ld + +SRC_C += \ + $(MCU_DIR)/project_template/clock_config.c \ + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = K32L2B31xxxxA + +# For flash-pyocd target +PYOCD_TARGET = K32L2B + +# flash using pyocd +flash: flash-pyocd diff --git a/hw/bsp/frdm_k32l2b/frdm_k32l2b.c b/hw/bsp/kinetis_k32/boards/frdm_k32l2b/frdm_k32l2b.c index 8d2b39500..1566b4e2e 100644 --- a/hw/bsp/frdm_k32l2b/frdm_k32l2b.c +++ b/hw/bsp/kinetis_k32/boards/frdm_k32l2b/frdm_k32l2b.c @@ -25,7 +25,7 @@ * This file is part of the TinyUSB stack. */ -#include "../board.h" +#include "bsp/board.h" #include "board.h" #include "fsl_gpio.h" #include "fsl_port.h" diff --git a/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld b/hw/bsp/kinetis_k32/boards/kuiic/K32L2B31xxxxA_flash.ld index f478a99c7..f478a99c7 100644 --- a/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld +++ b/hw/bsp/kinetis_k32/boards/kuiic/K32L2B31xxxxA_flash.ld diff --git a/hw/bsp/kuiic/board.h b/hw/bsp/kinetis_k32/boards/kuiic/board.h index 1e2d4f18b..1e2d4f18b 100644 --- a/hw/bsp/kuiic/board.h +++ b/hw/bsp/kinetis_k32/boards/kuiic/board.h diff --git a/hw/bsp/kinetis_k32/boards/kuiic/board.mk b/hw/bsp/kinetis_k32/boards/kuiic/board.mk new file mode 100644 index 000000000..29a12e982 --- /dev/null +++ b/hw/bsp/kinetis_k32/boards/kuiic/board.mk @@ -0,0 +1,26 @@ +MCU = K32L2B31A + +# This board uses TinyUF2 for updates +UF2_FAMILY_ID = 0x7f83e793 + +CFLAGS += \ + -mcpu=cortex-m0plus \ + -DCPU_K32L2B31VLH0A \ + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/K32L2B31xxxxA_flash.ld + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = K32L2B31xxxxA + +# For flash-pyocd target +PYOCD_TARGET = K32L2B + +# flash using pyocd +flash: flash-pyocd diff --git a/hw/bsp/kuiic/kuiic.c b/hw/bsp/kinetis_k32/boards/kuiic/kuiic.c index 97677d47a..f9002a6d3 100644 --- a/hw/bsp/kuiic/kuiic.c +++ b/hw/bsp/kinetis_k32/boards/kuiic/kuiic.c @@ -25,7 +25,7 @@ * This file is part of the TinyUSB stack. */ -#include "../board.h" +#include "bsp/board.h" #include "board.h" #include "fsl_smc.h" #include "fsl_gpio.h" diff --git a/hw/bsp/kinetis_k32/family.mk b/hw/bsp/kinetis_k32/family.mk new file mode 100644 index 000000000..f89138b72 --- /dev/null +++ b/hw/bsp/kinetis_k32/family.mk @@ -0,0 +1,32 @@ +SDK_DIR = hw/mcu/nxp/mcux-sdk +DEPS_SUBMODULES += $(SDK_DIR) + +MCU_DIR = $(SDK_DIR)/devices/$(MCU) +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -DCFG_TUSB_MCU=OPT_MCU_KINETIS_K32 + +SRC_C += \ + src/portable/nxp/khci/dcd_khci.c \ + src/portable/nxp/khci/hcd_khci.c \ + $(MCU_DIR)/system_$(MCU).c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(SDK_DIR)/drivers/gpio/fsl_gpio.c \ + $(SDK_DIR)/drivers/lpuart/fsl_lpuart.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(SDK_DIR)/CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/project_template \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(SDK_DIR)/drivers/smc \ + $(TOP)/$(SDK_DIR)/drivers/common \ + $(TOP)/$(SDK_DIR)/drivers/gpio \ + $(TOP)/$(SDK_DIR)/drivers/port \ + $(TOP)/$(SDK_DIR)/drivers/lpuart \ + +SRC_S += $(MCU_DIR)/gcc/startup_$(MCU).S diff --git a/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.mk b/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.mk new file mode 100644 index 000000000..0d0bceaa4 --- /dev/null +++ b/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.mk @@ -0,0 +1,21 @@ +MCU = MKL25Z4 + +CFLAGS += \ + -DCPU_MKL25Z128VLK4 \ + -DCFG_EXAMPLE_VIDEO_READONLY \ + -DCFG_EXAMPLE_MSC_READONLY + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=format -Wno-error=redundant-decls + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/MKL25Z128xxx4_flash.ld + +# For flash-jlink target +JLINK_DEVICE = MKL25Z128xxx4 + +# For flash-pyocd target +PYOCD_TARGET = mkl25zl128 + +# flash using pyocd +flash: flash-jlink diff --git a/hw/bsp/frdm_kl25z/frdm_kl25z.c b/hw/bsp/kinetis_kl/boards/frdm_kl25z/frdm_kl25z.c index 46f85f6a5..46f85f6a5 100644 --- a/hw/bsp/frdm_kl25z/frdm_kl25z.c +++ b/hw/bsp/kinetis_kl/boards/frdm_kl25z/frdm_kl25z.c diff --git a/hw/bsp/kinetis_kl/family.mk b/hw/bsp/kinetis_kl/family.mk new file mode 100644 index 000000000..e805d6dae --- /dev/null +++ b/hw/bsp/kinetis_kl/family.mk @@ -0,0 +1,37 @@ +SDK_DIR = hw/mcu/nxp/nxp_sdk +DEPS_SUBMODULES += $(SDK_DIR) + +MCU_DIR = $(SDK_DIR)/devices/$(MCU) +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0plus \ + -DCFG_TUSB_MCU=OPT_MCU_KINETIS_KL \ + +LDFLAGS += \ + -Wl,--defsym,__stack_size__=0x400 \ + -Wl,--defsym,__heap_size__=0 + +SRC_C += \ + src/portable/nxp/khci/dcd_khci.c \ + src/portable/nxp/khci/hcd_khci.c \ + $(MCU_DIR)/system_$(MCU).c \ + $(MCU_DIR)/project_template/clock_config.c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(MCU_DIR)/drivers/fsl_gpio.c \ + $(MCU_DIR)/drivers/fsl_lpsci.c \ + $(MCU_DIR)/drivers/fsl_uart.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(SDK_DIR)/CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/project_template \ + $(TOP)/$(MCU_DIR)/drivers + +SRC_S += $(MCU_DIR)/gcc/startup_$(MCU).S + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 diff --git a/hw/bsp/kuiic/board.mk b/hw/bsp/kuiic/board.mk deleted file mode 100644 index cb3459586..000000000 --- a/hw/bsp/kuiic/board.mk +++ /dev/null @@ -1,52 +0,0 @@ -SDK_DIR = hw/mcu/nxp/mcux-sdk -DEPS_SUBMODULES += $(SDK_DIR) tools/uf2 - -# This board uses TinyUF2 for updates -UF2_FAMILY_ID = 0x7f83e793 - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -DCPU_K32L2B31VLH0A \ - -DCFG_TUSB_MCU=OPT_MCU_K32L2BXX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter - -MCU_DIR = $(SDK_DIR)/devices/K32L2B31A - -# All source paths should be relative to the top level. -LD_FILE = /hw/bsp/$(BOARD)/K32L2B31xxxxA_flash.ld - -SRC_C += \ - src/portable/nxp/khci/dcd_khci.c \ - $(MCU_DIR)/system_K32L2B31A.c \ - $(MCU_DIR)/drivers/fsl_clock.c \ - $(SDK_DIR)/drivers/gpio/fsl_gpio.c \ - $(SDK_DIR)/drivers/lpuart/fsl_lpuart.c - -INC += \ - $(TOP)/hw/bsp/$(BOARD) \ - $(TOP)/$(SDK_DIR)/CMSIS/Include \ - $(TOP)/$(SDK_DIR)/drivers/smc \ - $(TOP)/$(SDK_DIR)/drivers/common \ - $(TOP)/$(SDK_DIR)/drivers/gpio \ - $(TOP)/$(SDK_DIR)/drivers/port \ - $(TOP)/$(SDK_DIR)/drivers/lpuart \ - $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/drivers - -SRC_S += $(MCU_DIR)/gcc/startup_K32L2B31A.S - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = MKL25Z128xxx4 - -# For flash-pyocd target -PYOCD_TARGET = K32L2B - -# flash using pyocd -flash: flash-pyocd diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 1d27f47af..b903abeca 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -85,7 +85,9 @@ #define TUP_DCD_ENDPOINT_MAX 8 #define TUP_RHPORT_HIGHSPEED 1 // Port0 HS, Port1 HS -#elif TU_CHECK_MCU(OPT_MCU_MKL25ZXX, OPT_MCU_K32L2BXX) +#elif TU_CHECK_MCU(OPT_MCU_KINETIS_KL, OPT_MCU_KINETIS_K32) + #define TUP_USBIP_CHIPIDEA_FS + #define TUP_USBIP_CHIPIDEA_FS_KINETIS #define TUP_DCD_ENDPOINT_MAX 16 #elif TU_CHECK_MCU(OPT_MCU_MM32F327X) diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index b6daec3de..52f4145f2 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -26,12 +26,14 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && ( \ - ( CFG_TUSB_MCU == OPT_MCU_MKL25ZXX ) || ( CFG_TUSB_MCU == OPT_MCU_K32L2BXX ) \ - ) +#if CFG_TUD_ENABLED && defined(TUP_USBIP_CHIPIDEA_FS) -#include "fsl_device_registers.h" -#define KHCI USB0 +#ifdef TUP_USBIP_CHIPIDEA_FS_KINETIS + #include "fsl_device_registers.h" + #define KHCI USB0 +#else + #error "MCU is not supported" +#endif #include "device/dcd.h" diff --git a/src/portable/nxp/khci/hcd_khci.c b/src/portable/nxp/khci/hcd_khci.c index 35763f121..6d25cd862 100644 --- a/src/portable/nxp/khci/hcd_khci.c +++ b/src/portable/nxp/khci/hcd_khci.c @@ -26,12 +26,14 @@ #include "tusb_option.h" -#if CFG_TUH_ENABLED && ( \ - ( CFG_TUSB_MCU == OPT_MCU_MKL25ZXX ) || ( CFG_TUSB_MCU == OPT_MCU_K32L2BXX ) \ - ) +#if CFG_TUH_ENABLED && defined(TUP_USBIP_CHIPIDEA_FS) -#include "fsl_device_registers.h" -#define KHCI USB0 +#ifdef TUP_USBIP_CHIPIDEA_FS_KINETIS + #include "fsl_device_registers.h" + #define KHCI USB0 +#else + #error "MCU is not supported" +#endif #include "host/hcd.h" diff --git a/src/tusb_option.h b/src/tusb_option.h index c019b0ba4..c679f2f12 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -117,8 +117,11 @@ #define OPT_MCU_RP2040 1100 ///< Raspberry Pi RP2040 // NXP Kinetis -#define OPT_MCU_MKL25ZXX 1200 ///< NXP MKL25Zxx -#define OPT_MCU_K32L2BXX 1201 ///< NXP K32L2Bxx +#define OPT_MCU_KINETIS_KL 1200 ///< NXP KL series +#define OPT_MCU_KINETIS_K32 1201 ///< NXP K32 series + +#define OPT_MCU_MKL25ZXX 1200 ///< Alias to KL (obsolete) +#define OPT_MCU_K32L2BXX 1201 ///< Alias to K32 (obsolete) // Silabs #define OPT_MCU_EFM32GG 1300 ///< Silabs EFM32GG |