diff options
| -rw-r--r-- | examples/device/CMakeLists.txt | 1 | ||||
| -rw-r--r-- | examples/device/audio_test_multi_rate/CMakeLists.txt | 28 | ||||
| -rw-r--r-- | examples/device/audio_test_multi_rate/Makefile | 12 | ||||
| -rw-r--r-- | examples/device/audio_test_multi_rate/skip.txt | 3 | ||||
| -rw-r--r-- | examples/device/audio_test_multi_rate/src/main.c | 521 | ||||
| -rw-r--r-- | examples/device/audio_test_multi_rate/src/plot_audio_samples.py | 38 | ||||
| -rw-r--r-- | examples/device/audio_test_multi_rate/src/tusb_config.h | 141 | ||||
| -rw-r--r-- | examples/device/audio_test_multi_rate/src/usb_descriptors.c | 169 | ||||
| -rw-r--r-- | examples/device/audio_test_multi_rate/src/usb_descriptors.h | 102 |
9 files changed, 1015 insertions, 0 deletions
diff --git a/examples/device/CMakeLists.txt b/examples/device/CMakeLists.txt index edf5ab805..5520209e0 100644 --- a/examples/device/CMakeLists.txt +++ b/examples/device/CMakeLists.txt @@ -8,6 +8,7 @@ family_initialize_project(tinyusb_device_examples ${CMAKE_CURRENT_LIST_DIR}) # family_add_subdirectory will filter what to actually add based on selected FAMILY family_add_subdirectory(audio_4_channel_mic) family_add_subdirectory(audio_test) +family_add_subdirectory(audio_test_multi_rate) family_add_subdirectory(board_test) family_add_subdirectory(cdc_dual_ports) family_add_subdirectory(cdc_msc) diff --git a/examples/device/audio_test_multi_rate/CMakeLists.txt b/examples/device/audio_test_multi_rate/CMakeLists.txt new file mode 100644 index 000000000..cb321f9a8 --- /dev/null +++ b/examples/device/audio_test_multi_rate/CMakeLists.txt @@ -0,0 +1,28 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c +) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src +) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/examples/device/audio_test_multi_rate/Makefile b/examples/device/audio_test_multi_rate/Makefile new file mode 100644 index 000000000..5a455078e --- /dev/null +++ b/examples/device/audio_test_multi_rate/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/examples/device/audio_test_multi_rate/skip.txt b/examples/device/audio_test_multi_rate/skip.txt new file mode 100644 index 000000000..ae9b57f1f --- /dev/null +++ b/examples/device/audio_test_multi_rate/skip.txt @@ -0,0 +1,3 @@ +mcu:SAMD11 +mcu:SAME5X +mcu:SAMG
\ No newline at end of file diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c new file mode 100644 index 000000000..e4d2d0253 --- /dev/null +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -0,0 +1,521 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Reinhard Panhuber + * Copyright (c) 2022 HiFiPhile + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +/* plot_audio_samples.py requires following modules: + * $ sudo apt install libportaudio + * $ pip3 install sounddevice matplotlib + * + * Then run + * $ python3 plot_audio_samples.py + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" +#include "usb_descriptors.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +// Audio controls +// Current states +bool mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; // +1 for master channel 0 +uint16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; // +1 for master channel 0 +uint32_t sampFreq; +uint8_t bytesPerSample; +uint8_t clkValid; + +// Range states +// List of supported sample rates +static const uint32_t sampleRatesList[] = +{ + 32000, 48000, 96000 +}; + +#define N_sampleRates TU_ARRAY_SIZE(sampleRatesList) + +// Bytes per format of every Alt settings +static const uint8_t bytesPerSampleAltList[CFG_TUD_AUDIO_FUNC_1_N_FORMATS] = +{ + CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, + CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, +}; + +audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; // Volume range state + + +// Audio test data +CFG_TUSB_MEM_ALIGN uint8_t test_buffer_audio[CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX]; +uint16_t startVal = 0; + +void led_blinking_task(void); +void audio_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); + + // Init values + sampFreq = sampleRatesList[0]; + clkValid = 1; + + while (1) + { + tud_task(); // tinyusb device task + led_blinking_task(); + audio_task(); + } + + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +//--------------------------------------------------------------------+ +// AUDIO Task +//--------------------------------------------------------------------+ + +void audio_task(void) +{ + // Yet to be filled - e.g. put meas data into TX FIFOs etc. + // asm("nop"); +} + +//--------------------------------------------------------------------+ +// Application Callback API Implementations +//--------------------------------------------------------------------+ + +// Invoked when set interface is called, typically on start/stop streaming or format change +bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void)rhport; + //uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex)); + uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue)); + + // Clear buffer when streaming format is changed + if(alt != 0) + { + bytesPerSample = bytesPerSampleAltList[alt-1]; + } + return true; +} + +// Invoked when audio class specific set request received for an EP +bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff) +{ + (void) rhport; + (void) pBuff; + + // We do not support any set range requests here, only current value requests + TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t ep = TU_U16_LOW(p_request->wIndex); + + (void) channelNum; (void) ctrlSel; (void) ep; + + return false; // Yet not implemented +} + +// Invoked when audio class specific set request received for an interface +bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff) +{ + (void) rhport; + (void) pBuff; + + // We do not support any set range requests here, only current value requests + TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t itf = TU_U16_LOW(p_request->wIndex); + + (void) channelNum; (void) ctrlSel; (void) itf; + + return false; // Yet not implemented +} + +// Invoked when audio class specific set request received for an entity +bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff) +{ + (void) rhport; + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t itf = TU_U16_LOW(p_request->wIndex); + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + (void) itf; + + // We do not support any set range requests here, only current value requests + TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + + // If request is for our feature unit + if ( entityID == UAC2_ENTITY_FEATURE_UNIT ) + { + switch ( ctrlSel ) + { + case AUDIO_FU_CTRL_MUTE: + // Request uses format layout 1 + TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t)); + + mute[channelNum] = ((audio_control_cur_1_t*) pBuff)->bCur; + + TU_LOG2(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); + return true; + + case AUDIO_FU_CTRL_VOLUME: + // Request uses format layout 2 + TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); + + volume[channelNum] = (uint16_t) ((audio_control_cur_2_t*) pBuff)->bCur; + + TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); + return true; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + // Clock Source unit + if ( entityID == UAC2_ENTITY_CLOCK ) + { + switch ( ctrlSel ) + { + case AUDIO_CS_CTRL_SAM_FREQ: + TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_4_t)); + + sampFreq = ((audio_control_cur_4_t *)pBuff)->bCur; + + TU_LOG2("Clock set current freq: %d\r\n", sampFreq); + + return true; + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + return false; // Yet not implemented +} + +// Invoked when audio class specific get request received for an EP +bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void) rhport; + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t ep = TU_U16_LOW(p_request->wIndex); + + (void) channelNum; (void) ctrlSel; (void) ep; + + // return tud_control_xfer(rhport, p_request, &tmp, 1); + + return false; // Yet not implemented +} + +// Invoked when audio class specific get request received for an interface +bool tud_audio_get_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void) rhport; + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t itf = TU_U16_LOW(p_request->wIndex); + + (void) channelNum; (void) ctrlSel; (void) itf; + + return false; // Yet not implemented +} + +// Invoked when audio class specific get request received for an entity +bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void) rhport; + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + // uint8_t itf = TU_U16_LOW(p_request->wIndex); // Since we have only one audio function implemented, we do not need the itf value + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + // Input terminal (Microphone input) + if (entityID == UAC2_ENTITY_INPUT_TERMINAL) + { + switch ( ctrlSel ) + { + case AUDIO_TE_CTRL_CONNECTOR: + { + // The terminal connector control only has a get request with only the CUR attribute. + audio_desc_channel_cluster_t ret; + + // Those are dummy values for now + ret.bNrChannels = 1; + ret.bmChannelConfig = 0; + ret.iChannelNames = 0; + + TU_LOG2(" Get terminal connector\r\n"); + + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, (void*) &ret, sizeof(ret)); + } + break; + + // Unknown/Unsupported control selector + default: + TU_BREAKPOINT(); + return false; + } + } + + // Feature unit + if (entityID == UAC2_ENTITY_FEATURE_UNIT) + { + switch ( ctrlSel ) + { + case AUDIO_FU_CTRL_MUTE: + // Audio control mute cur parameter block consists of only one byte - we thus can send it right away + // There does not exist a range parameter block for mute + TU_LOG2(" Get Mute of channel: %u\r\n", channelNum); + return tud_control_xfer(rhport, p_request, &mute[channelNum], 1); + + case AUDIO_FU_CTRL_VOLUME: + switch ( p_request->bRequest ) + { + case AUDIO_CS_REQ_CUR: + TU_LOG2(" Get Volume of channel: %u\r\n", channelNum); + return tud_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum])); + + case AUDIO_CS_REQ_RANGE: + TU_LOG2(" Get Volume range of channel: %u\r\n", channelNum); + + // Copy values - only for testing - better is version below + audio_control_range_2_n_t(1) + ret; + + ret.wNumSubRanges = 1; + ret.subrange[0].bMin = -90; // -90 dB + ret.subrange[0].bMax = 30; // +30 dB + ret.subrange[0].bRes = 1; // 1 dB steps + + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, (void*) &ret, sizeof(ret)); + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + // Clock Source unit + if ( entityID == UAC2_ENTITY_CLOCK ) + { + switch ( ctrlSel ) + { + case AUDIO_CS_CTRL_SAM_FREQ: + // channelNum is always zero in this case + switch ( p_request->bRequest ) + { + case AUDIO_CS_REQ_CUR: + TU_LOG2(" Get Sample Freq.\r\n"); + return tud_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); + + case AUDIO_CS_REQ_RANGE: + { + TU_LOG2(" Get Sample Freq. range\r\n"); + audio_control_range_4_n_t(N_sampleRates) rangef = + { + .wNumSubRanges = tu_htole16(N_sampleRates) + }; + TU_LOG1("Clock get %d freq ranges\r\n", N_sampleRates); + for(uint8_t i = 0; i < N_sampleRates; i++) + { + rangef.subrange[i].bMin = sampleRatesList[i]; + rangef.subrange[i].bMax = sampleRatesList[i]; + rangef.subrange[i].bRes = 0; + TU_LOG1("Range %d (%d, %d, %d)\r\n", i, (int)rangef.subrange[i].bMin, (int)rangef.subrange[i].bMax, (int)rangef.subrange[i].bRes); + } + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &rangef, sizeof(rangef)); + } + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + break; + + case AUDIO_CS_CTRL_CLK_VALID: + // Only cur attribute exists for this request + TU_LOG2(" Get Sample Freq. valid\r\n"); + return tud_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid)); + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + TU_LOG2(" Unsupported entity: %d\r\n", entityID); + return false; // Yet not implemented +} + +bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting) +{ + (void) rhport; + (void) itf; + (void) ep_in; + (void) cur_alt_setting; + + tud_audio_write ((uint8_t *)test_buffer_audio, sampFreq / (TUD_OPT_HIGH_SPEED ? 8000 : 1000) * bytesPerSample); + + return true; +} + +bool tud_audio_tx_done_post_load_cb(uint8_t rhport, uint16_t n_bytes_copied, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting) +{ + (void) rhport; + (void) n_bytes_copied; + (void) itf; + (void) ep_in; + (void) cur_alt_setting; + + // 16bit + if(bytesPerSample == 2) + { + uint16_t* pData_16 = (uint16_t*)test_buffer_audio; + for (size_t cnt = 0; cnt < sampFreq / (TUD_OPT_HIGH_SPEED ? 8000 : 1000); cnt++) + { + pData_16[cnt] = startVal++; + } + } + // 24bit in 32bit slot + else if(bytesPerSample == 4) + { + uint32_t* pData_32 = (uint32_t*)test_buffer_audio; + for (size_t cnt = 0; cnt < sampFreq / (TUD_OPT_HIGH_SPEED ? 8000 : 1000); cnt++) + { + pData_32[cnt] = (uint32_t)startVal++ << 16U; + } + } + + return true; +} + +bool tud_audio_set_itf_close_EP_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void) rhport; + (void) p_request; + startVal = 0; + + return true; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/examples/device/audio_test_multi_rate/src/plot_audio_samples.py b/examples/device/audio_test_multi_rate/src/plot_audio_samples.py new file mode 100644 index 000000000..4a5f15a9c --- /dev/null +++ b/examples/device/audio_test_multi_rate/src/plot_audio_samples.py @@ -0,0 +1,38 @@ +import sounddevice as sd +import matplotlib.pyplot as plt +import numpy as np +import platform +import csv + +if __name__ == '__main__': + + # If you got "ValueError: No input device matching", that is because your PC name example device + # differently from tested list below. Uncomment the next line to see full list and try to pick correct one + # print(sd.query_devices()) + + fs = 96000 # Sample rate + duration = 100e-3 # Duration of recording + + if platform.system() == 'Windows': + # MME is needed since there are more than one MicNode device APIs (at least in Windows) + device = 'Microphone (MicNode) MME' + elif platform.system() == 'Darwin': + device = 'MicNode' + else: + device ='default' + + myrecording = sd.rec(int(duration * fs), samplerate=fs, channels=1, dtype='int16', device=device) + print('Waiting...') + sd.wait() # Wait until recording is finished + print('Done!') + + time = np.arange(0, duration, 1 / fs) # time vector + plt.plot(time, myrecording) + plt.xlabel('Time [s]') + plt.ylabel('Amplitude') + plt.title('MicNode') + plt.show() + + samples = np.array(myrecording) + np.savetxt('Output.csv', samples, delimiter=",", fmt='%s') +
\ No newline at end of file diff --git a/examples/device/audio_test_multi_rate/src/tusb_config.h b/examples/device/audio_test_multi_rate/src/tusb_config.h new file mode 100644 index 000000000..d8b6511d6 --- /dev/null +++ b/examples/device/audio_test_multi_rate/src/tusb_config.h @@ -0,0 +1,141 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "usb_descriptors.h" + +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_AUDIO 1 +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 + +//-------------------------------------------------------------------- +// AUDIO CLASS DRIVER CONFIGURATION +//-------------------------------------------------------------------- + +#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE 96000 + +// How many formats are used, need to adjust USB descriptor if changed +#define CFG_TUD_AUDIO_FUNC_1_N_FORMATS 2 + +// 16bit in 16bit slots +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX 2 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX 16 + +// 24bit in 32bit slots +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX 4 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX 24 + +// Have a look into audio_device.h for all configurations + +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 1 // Number of Standard AS Interface Descriptors (4.9.1) defined per audio function - this is required to be able to remember the current alternate settings of these interfaces - We restrict us here to have a constant number for all audio functions (which means this has to be the maximum number of AS interfaces an audio function has and a second audio function with less AS interfaces just wastes a few bytes) +#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer + +#define CFG_TUD_AUDIO_ENABLE_EP_IN 1 +#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! + +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) + +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN) // Maximum EP IN size for all AS alternate settings used +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX +#ifdef __cplusplus +} +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.c b/examples/device/audio_test_multi_rate/src/usb_descriptors.c new file mode 100644 index 000000000..92e791a72 --- /dev/null +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.c @@ -0,0 +1,169 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * Copyright (c) 2022 HiFiPhile + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" +#include "usb_descriptors.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ +enum +{ + ITF_NUM_AUDIO_CONTROL = 0, + ITF_NUM_AUDIO_STREAMING, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... + #define EPNUM_AUDIO 0x03 + +#elif TU_CHECK_MCU(OPT_MCU_NRF5X) + // nRF5x ISO can only be endpoint 8 + #define EPNUM_AUDIO 0x08 + +#else + #define EPNUM_AUDIO 0x01 +#endif + +uint8_t const desc_configuration[] = +{ + // Interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_epin*/ 0x80 | EPNUM_AUDIO) +}; + +TU_VERIFY_STATIC(sizeof(desc_configuration) == CONFIG_TOTAL_LEN, "Incorrect size"); + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + return desc_configuration; +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "PaniRCorp", // 1: Manufacturer + "MicNode", // 2: Product + "123456", // 3: Serials, should use chip ID + "UAC2", // 4: Audio Interface +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Convert ASCII string into UTF-16 + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = (uint8_t) strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); + + return _desc_str; +} diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.h b/examples/device/audio_test_multi_rate/src/usb_descriptors.h new file mode 100644 index 000000000..77e2fe6c1 --- /dev/null +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.h @@ -0,0 +1,102 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2022 HiFiPhile + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _USB_DESCRIPTORS_H_ +#define _USB_DESCRIPTORS_H_ + +// #include "tusb.h" + +// Unit numbers are arbitrary selected +#define UAC2_ENTITY_CLOCK 0x04 +#define UAC2_ENTITY_INPUT_TERMINAL 0x01 +#define UAC2_ENTITY_OUTPUT_TERMINAL 0x03 +#define UAC2_ENTITY_FEATURE_UNIT 0x02 + + +#define TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\ + + TUD_AUDIO_DESC_STD_AC_LEN\ + + TUD_AUDIO_DESC_CS_AC_LEN\ + + TUD_AUDIO_DESC_CLK_SRC_LEN\ + + TUD_AUDIO_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN\ + /* Interface 1, Alternate 0 */\ + + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + /* Interface 1, Alternate 1 */\ + + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + /* Interface 1, Alternate 2 */\ + + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN) + + +#define TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESCRIPTOR(_itfnum, _stridx, _epin) \ + /* Standard Interface Association Descriptor (IAD) */\ + TUD_AUDIO_DESC_IAD(/*_firstitfs*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ + /* Standard AC Interface Descriptor(4.7.1) */\ + TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ + TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, /*_ctrl*/ AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + /* Clock Source Descriptor(4.7.2.1) */\ + TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ AUDIO_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ AUDIO_CTRL_RW << AUDIO_CLOCK_SOURCE_CTRL_CLK_FRQ_POS | AUDIO_CTRL_R << AUDIO_CLOCK_SOURCE_CTRL_CLK_VAL_POS, /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + /* Input Terminal Descriptor(4.7.2.4) */\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ + /* Output Terminal Descriptor(4.7.2.5) */\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC2_ENTITY_INPUT_TERMINAL, /*_srcid*/ UAC2_ENTITY_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + /* Feature Unit Descriptor(4.7.2.8) */\ + TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ UAC2_ENTITY_FEATURE_UNIT, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ + /* Standard AS Interface Descriptor(4.9.1) */\ + /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ + TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ + /* Standard AS Interface Descriptor(4.9.1) */\ + /* Interface 1, Alternate 1 - alternate interface for data streaming */\ + TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ + /* Class-Specific AS Interface Descriptor(4.9.2) */\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ + TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ + /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ + TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, /*_interval*/ 0x01),\ + /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + /* Interface 1, Alternate 2 - alternate interface for data streaming */\ + TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ + /* Class-Specific AS Interface Descriptor(4.9.2) */\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ + TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ + /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ + TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN, /*_interval*/ 0x01),\ + /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + + +#endif
\ No newline at end of file |