diff options
| -rw-r--r-- | src/portable/microchip/samd/dcd_samd.c | 44 |
1 files changed, 39 insertions, 5 deletions
diff --git a/src/portable/microchip/samd/dcd_samd.c b/src/portable/microchip/samd/dcd_samd.c index 32ddd3422..54ef34c8e 100644 --- a/src/portable/microchip/samd/dcd_samd.c +++ b/src/portable/microchip/samd/dcd_samd.c @@ -229,15 +229,49 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { (void) rhport; - (void) ep_addr; - (void)largest_packet_size; - return false; + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + + // Reserve the endpoint bank with the largest packet size (persists across altsettings). The + // buffer address/count are filled per-transfer in dcd_edpt_xfer; only the SIZE bucket is fixed. + UsbDeviceDescBank* bank = &sram_registers[epnum][dir]; + uint32_t size_value = 0; + while (size_value < 7) { + if (1 << (size_value + 3) >= largest_packet_size) { + break; + } + size_value++; + } + if ( size_value == 7 && largest_packet_size > 1023 ) return false; + + bank->PCKSIZE.bit.SIZE = size_value; + return true; } bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { (void)rhport; - (void)desc_ep; - return false; + uint8_t const epnum = tu_edpt_number(desc_ep->bEndpointAddress); + uint8_t const dir = tu_edpt_dir(desc_ep->bEndpointAddress); + + // Configure and enable the ISO endpoint on altsetting selection (bank SIZE already reserved by + // dcd_edpt_iso_alloc). Mirrors the per-direction setup in dcd_edpt_open(), plus a bank scrub: + // under ISO_ALLOC the EP is never disabled on alt0 (usbd_edpt_close is a no-op), so the bank-ready + // state from the previous streaming session survives into re-activation. Leave the EP un-armed so + // a stale bank can't move a packet before dcd_edpt_xfer re-arms it (a leftover BK1RDY with a stale + // BYTE_COUNT would otherwise babble on the first IN token after re-selecting alt1). + UsbDeviceEndpoint* ep = &USB->DEVICE.DeviceEndpoint[epnum]; + if ( dir == TUSB_DIR_OUT ) { + ep->EPCFG.bit.EPTYPE0 = desc_ep->bmAttributes.xfer + 1; + ep->EPSTATUSCLR.reg = USB_DEVICE_EPSTATUSCLR_STALLRQ0 | USB_DEVICE_EPSTATUSCLR_DTGLOUT; + ep->EPSTATUSSET.reg = USB_DEVICE_EPSTATUSSET_BK0RDY; // OUT: not ready to receive until armed + ep->EPINTENSET.bit.TRCPT0 = true; + } else { + ep->EPCFG.bit.EPTYPE1 = desc_ep->bmAttributes.xfer + 1; + ep->EPSTATUSCLR.reg = USB_DEVICE_EPSTATUSCLR_STALLRQ1 | USB_DEVICE_EPSTATUSCLR_DTGLIN | + USB_DEVICE_EPSTATUSCLR_BK1RDY; // IN: clear stale "loaded" bank + ep->EPINTENSET.bit.TRCPT1 = true; + } + return true; } void dcd_edpt_close_all (uint8_t rhport) |