diff options
| -rw-r--r-- | src/portable/nxp/transdimension/common_transdimension.h | 136 | ||||
| -rw-r--r-- | src/portable/nxp/transdimension/dcd_transdimension.c | 672 | ||||
| -rw-r--r-- | src/portable/nxp/transdimension/hcd_transdimension.c | 119 |
3 files changed, 0 insertions, 927 deletions
diff --git a/src/portable/nxp/transdimension/common_transdimension.h b/src/portable/nxp/transdimension/common_transdimension.h deleted file mode 100644 index 95ae1903e..000000000 --- a/src/portable/nxp/transdimension/common_transdimension.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef COMMON_TRANSDIMENSION_H_ -#define COMMON_TRANSDIMENSION_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// USBCMD -enum { - USBCMD_RUN_STOP = TU_BIT(0), - USBCMD_RESET = TU_BIT(1), - USBCMD_SETUP_TRIPWIRE = TU_BIT(13), - USBCMD_ADD_QTD_TRIPWIRE = TU_BIT(14) ///< This bit is used as a semaphore to ensure the to proper addition of a new dTD to an active (primed) endpoint’s linked list. This bit is set and cleared by software during the process of adding a new dTD -// Interrupt Threshold bit 23:16 -}; - -// PORTSC1 -#define PORTSC1_PORT_SPEED_POS 26 - -enum { - PORTSC1_CURRENT_CONNECT_STATUS = TU_BIT(0), - PORTSC1_FORCE_PORT_RESUME = TU_BIT(6), - PORTSC1_SUSPEND = TU_BIT(7), - PORTSC1_FORCE_FULL_SPEED = TU_BIT(24), - PORTSC1_PORT_SPEED = TU_BIT(26) | TU_BIT(27) -}; - -// OTGSC -enum { - OTGSC_VBUS_DISCHARGE = TU_BIT(0), - OTGSC_VBUS_CHARGE = TU_BIT(1), -// OTGSC_HWASSIST_AUTORESET = TU_BIT(2), - OTGSC_OTG_TERMINATION = TU_BIT(3), ///< Must set to 1 when OTG go to device mode - OTGSC_DATA_PULSING = TU_BIT(4), - OTGSC_ID_PULLUP = TU_BIT(5), -// OTGSC_HWASSIT_DATA_PULSE = TU_BIT(6), -// OTGSC_HWASSIT_BDIS_ACONN = TU_BIT(7), - OTGSC_ID = TU_BIT(8), ///< 0 = A device, 1 = B Device - OTGSC_A_VBUS_VALID = TU_BIT(9), - OTGSC_A_SESSION_VALID = TU_BIT(10), - OTGSC_B_SESSION_VALID = TU_BIT(11), - OTGSC_B_SESSION_END = TU_BIT(12), - OTGSC_1MS_TOGGLE = TU_BIT(13), - OTGSC_DATA_BUS_PULSING_STATUS = TU_BIT(14), -}; - -// USBMode -enum { - USBMODE_CM_DEVICE = 2, - USBMODE_CM_HOST = 3, - - USBMODE_SLOM = TU_BIT(3), - USBMODE_SDIS = TU_BIT(4), - - USBMODE_VBUS_POWER_SELECT = TU_BIT(5), // Need to be enabled for LPC18XX/43XX in host mode -}; - -// Device Registers -typedef struct -{ - //------------- ID + HW Parameter Registers-------------// - __I uint32_t TU_RESERVED[64]; ///< For iMX RT10xx, but not used by LPC18XX/LPC43XX - - //------------- Capability Registers-------------// - __I uint8_t CAPLENGTH; ///< Capability Registers Length - __I uint8_t TU_RESERVED[1]; - __I uint16_t HCIVERSION; ///< Host Controller Interface Version - - __I uint32_t HCSPARAMS; ///< Host Controller Structural Parameters - __I uint32_t HCCPARAMS; ///< Host Controller Capability Parameters - __I uint32_t TU_RESERVED[5]; - - __I uint16_t DCIVERSION; ///< Device Controller Interface Version - __I uint8_t TU_RESERVED[2]; - - __I uint32_t DCCPARAMS; ///< Device Controller Capability Parameters - __I uint32_t TU_RESERVED[6]; - - //------------- Operational Registers -------------// - __IO uint32_t USBCMD; ///< USB Command Register - __IO uint32_t USBSTS; ///< USB Status Register - __IO uint32_t USBINTR; ///< Interrupt Enable Register - __IO uint32_t FRINDEX; ///< USB Frame Index - __I uint32_t TU_RESERVED; - __IO uint32_t DEVICEADDR; ///< Device Address - __IO uint32_t ENDPTLISTADDR; ///< Endpoint List Address - __I uint32_t TU_RESERVED; - __IO uint32_t BURSTSIZE; ///< Programmable Burst Size - __IO uint32_t TXFILLTUNING; ///< TX FIFO Fill Tuning - uint32_t TU_RESERVED[4]; - __IO uint32_t ENDPTNAK; ///< Endpoint NAK - __IO uint32_t ENDPTNAKEN; ///< Endpoint NAK Enable - __I uint32_t TU_RESERVED; - __IO uint32_t PORTSC1; ///< Port Status & Control - __I uint32_t TU_RESERVED[7]; - __IO uint32_t OTGSC; ///< On-The-Go Status & control - __IO uint32_t USBMODE; ///< USB Device Mode - __IO uint32_t ENDPTSETUPSTAT; ///< Endpoint Setup Status - __IO uint32_t ENDPTPRIME; ///< Endpoint Prime - __IO uint32_t ENDPTFLUSH; ///< Endpoint Flush - __I uint32_t ENDPTSTAT; ///< Endpoint Status - __IO uint32_t ENDPTCOMPLETE; ///< Endpoint Complete - __IO uint32_t ENDPTCTRL[8]; ///< Endpoint Control 0 - 7 -} dcd_registers_t, hcd_registers_t; - -#ifdef __cplusplus - } -#endif - -#endif /* COMMON_TRANSDIMENSION_H_ */ diff --git a/src/portable/nxp/transdimension/dcd_transdimension.c b/src/portable/nxp/transdimension/dcd_transdimension.c deleted file mode 100644 index 983d7cfcf..000000000 --- a/src/portable/nxp/transdimension/dcd_transdimension.c +++ /dev/null @@ -1,672 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "tusb_option.h" - -#if CFG_TUD_ENABLED && \ - (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT) - -#warning "transdimenion is renamed to chipidea (portable/chipidea/ci_hs) to match other opensource naming convention such as linux. This file will be removed in the future, please update your makefile accordingly" - -//--------------------------------------------------------------------+ -// INCLUDE -//--------------------------------------------------------------------+ -#if CFG_TUSB_MCU == OPT_MCU_MIMXRT - #include "fsl_device_registers.h" - #define INCLUDE_FSL_DEVICE_REGISTERS -#else - // LPCOpen for 18xx & 43xx - #include "chip.h" -#endif - -#include "common/tusb_common.h" -#include "device/dcd.h" -#include "common_transdimension.h" - -#if defined(__CORTEX_M) && __CORTEX_M == 7 && __DCACHE_PRESENT == 1 - #define CleanInvalidateDCache_by_Addr SCB_CleanInvalidateDCache_by_Addr -#else - #define CleanInvalidateDCache_by_Addr(_addr, _dsize) -#endif - -//--------------------------------------------------------------------+ -// MACRO CONSTANT TYPEDEF -//--------------------------------------------------------------------+ - -// ENDPTCTRL -enum { - ENDPTCTRL_STALL = TU_BIT(0), - ENDPTCTRL_TOGGLE_INHIBIT = TU_BIT(5), // used for test only - ENDPTCTRL_TOGGLE_RESET = TU_BIT(6), - ENDPTCTRL_ENABLE = TU_BIT(7) -}; - -enum { - ENDPTCTRL_TYPE_POS = 2, // Endpoint type is 2-bit field -}; - -// USBSTS, USBINTR -enum { - INTR_USB = TU_BIT(0), - INTR_ERROR = TU_BIT(1), - INTR_PORT_CHANGE = TU_BIT(2), - INTR_RESET = TU_BIT(6), - INTR_SOF = TU_BIT(7), - INTR_SUSPEND = TU_BIT(8), - INTR_NAK = TU_BIT(16) -}; - -// Queue Transfer Descriptor -typedef struct -{ - // Word 0: Next QTD Pointer - uint32_t next; ///< Next link pointer This field contains the physical memory address of the next dTD to be processed - - // Word 1: qTQ Token - uint32_t : 3 ; - volatile uint32_t xact_err : 1 ; - uint32_t : 1 ; - volatile uint32_t buffer_err : 1 ; - volatile uint32_t halted : 1 ; - volatile uint32_t active : 1 ; - uint32_t : 2 ; - uint32_t iso_mult_override : 2 ; ///< This field can be used for transmit ISOs to override the MULT field in the dQH. This field must be zero for all packet types that are not transmit-ISO. - uint32_t : 3 ; - uint32_t int_on_complete : 1 ; - volatile uint32_t total_bytes : 15 ; - uint32_t : 1 ; - - // Word 2-6: Buffer Page Pointer List, Each element in the list is a 4K page aligned, physical memory address. The lower 12 bits in each pointer are reserved (except for the first one) as each memory pointer must reference the start of a 4K page - uint32_t buffer[5]; ///< buffer1 has frame_n for TODO Isochronous - - //--------------------------------------------------------------------+ - // TD is 32 bytes aligned but occupies only 28 bytes - // Therefore there are 4 bytes padding that we can use. - //--------------------------------------------------------------------+ - uint16_t expected_bytes; - uint8_t reserved[2]; -} dcd_qtd_t; - -TU_VERIFY_STATIC( sizeof(dcd_qtd_t) == 32, "size is not correct"); - -// Queue Head -typedef struct -{ - // Word 0: Capabilities and Characteristics - uint32_t : 15 ; ///< Number of packets executed per transaction descriptor 00 - Execute N transactions as demonstrated by the USB variable length protocol where N is computed using Max_packet_length and the Total_bytes field in the dTD. 01 - Execute one transaction 10 - Execute two transactions 11 - Execute three transactions Remark: Non-isochronous endpoints must set MULT = 00. Remark: Isochronous endpoints must set MULT = 01, 10, or 11 as needed. - uint32_t int_on_setup : 1 ; ///< Interrupt on setup This bit is used on control type endpoints to indicate if USBINT is set in response to a setup being received. - uint32_t max_packet_size : 11 ; ///< Endpoint's wMaxPacketSize - uint32_t : 2 ; - uint32_t zero_length_termination : 1 ; ///< This bit is used for non-isochronous endpoints to indicate when a zero-length packet is received to terminate transfers in case the total transfer length is “multiple”. 0 - Enable zero-length packet to terminate transfers equal to a multiple of Max_packet_length (default). 1 - Disable zero-length packet on transfers that are equal in length to a multiple Max_packet_length. - uint32_t iso_mult : 2 ; ///< - - // Word 1: Current qTD Pointer - volatile uint32_t qtd_addr; - - // Word 2-9: Transfer Overlay - volatile dcd_qtd_t qtd_overlay; - - // Word 10-11: Setup request (control OUT only) - volatile tusb_control_request_t setup_request; - - //--------------------------------------------------------------------+ - // QHD is 64 bytes aligned but occupies only 48 bytes - // Therefore there are 16 bytes padding that we can use. - //--------------------------------------------------------------------+ - tu_fifo_t * ff; - uint8_t reserved[12]; -} dcd_qhd_t; - -TU_VERIFY_STATIC( sizeof(dcd_qhd_t) == 64, "size is not correct"); - -//--------------------------------------------------------------------+ -// Variables -//--------------------------------------------------------------------+ - -typedef struct -{ - dcd_registers_t* regs; // registers - const IRQn_Type irqnum; // IRQ number - const uint8_t ep_count; // Max bi-directional Endpoints -}dcd_controller_t; - -#if CFG_TUSB_MCU == OPT_MCU_MIMXRT - static const dcd_controller_t _dcd_controller[] = - { - // RT1010 and RT1020 only has 1 USB controller - #if FSL_FEATURE_SOC_USBHS_COUNT == 1 - { .regs = (dcd_registers_t*) USB_BASE , .irqnum = USB_OTG1_IRQn, .ep_count = 8 } - #else - { .regs = (dcd_registers_t*) USB1_BASE, .irqnum = USB_OTG1_IRQn, .ep_count = 8 }, - { .regs = (dcd_registers_t*) USB2_BASE, .irqnum = USB_OTG2_IRQn, .ep_count = 8 } - #endif - }; - -#else - static const dcd_controller_t _dcd_controller[] = - { - { .regs = (dcd_registers_t*) LPC_USB0_BASE, .irqnum = USB0_IRQn, .ep_count = 6 }, - { .regs = (dcd_registers_t*) LPC_USB1_BASE, .irqnum = USB1_IRQn, .ep_count = 4 } - }; -#endif - -#define QTD_NEXT_INVALID 0x01 - -typedef struct { - // Must be at 2K alignment - // Each endpoint with direction (IN/OUT) occupies a queue head - // for portability, TinyUSB only queue 1 TD for each Qhd - dcd_qhd_t qhd[TUP_DCD_ENDPOINT_MAX][2] TU_ATTR_ALIGNED(64); - dcd_qtd_t qtd[TUP_DCD_ENDPOINT_MAX][2] TU_ATTR_ALIGNED(32); -}dcd_data_t; - -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(2048) -static dcd_data_t _dcd_data; - -//--------------------------------------------------------------------+ -// Controller API -//--------------------------------------------------------------------+ - -/// follows LPC43xx User Manual 23.10.3 -static void bus_reset(uint8_t rhport) -{ - dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; - - // The reset value for all endpoint types is the control endpoint. If one endpoint - // direction is enabled and the paired endpoint of opposite direction is disabled, then the - // endpoint type of the unused direction must be changed from the control type to any other - // type (e.g. bulk). Leaving an un-configured endpoint control will cause undefined behavior - // for the data PID tracking on the active endpoint. - for( uint8_t i=1; i < _dcd_controller[rhport].ep_count; i++) - { - dcd_reg->ENDPTCTRL[i] = (TUSB_XFER_BULK << ENDPTCTRL_TYPE_POS) | (TUSB_XFER_BULK << (16+ENDPTCTRL_TYPE_POS)); - } - - //------------- Clear All Registers -------------// - dcd_reg->ENDPTNAK = dcd_reg->ENDPTNAK; - dcd_reg->ENDPTNAKEN = 0; - dcd_reg->USBSTS = dcd_reg->USBSTS; - dcd_reg->ENDPTSETUPSTAT = dcd_reg->ENDPTSETUPSTAT; - dcd_reg->ENDPTCOMPLETE = dcd_reg->ENDPTCOMPLETE; - - while (dcd_reg->ENDPTPRIME) {} - dcd_reg->ENDPTFLUSH = 0xFFFFFFFF; - while (dcd_reg->ENDPTFLUSH) {} - - // read reset bit in portsc - - //------------- Queue Head & Queue TD -------------// - tu_memclr(&_dcd_data, sizeof(dcd_data_t)); - - //------------- Set up Control Endpoints (0 OUT, 1 IN) -------------// - _dcd_data.qhd[0][0].zero_length_termination = _dcd_data.qhd[0][1].zero_length_termination = 1; - _dcd_data.qhd[0][0].max_packet_size = _dcd_data.qhd[0][1].max_packet_size = CFG_TUD_ENDPOINT0_SIZE; - _dcd_data.qhd[0][0].qtd_overlay.next = _dcd_data.qhd[0][1].qtd_overlay.next = QTD_NEXT_INVALID; - - _dcd_data.qhd[0][0].int_on_setup = 1; // OUT only -} - -void dcd_init(uint8_t rhport) -{ - tu_memclr(&_dcd_data, sizeof(dcd_data_t)); - - dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; - - // Reset controller - dcd_reg->USBCMD |= USBCMD_RESET; - while( dcd_reg->USBCMD & USBCMD_RESET ) {} - - // Set mode to device, must be set immediately after reset - dcd_reg->USBMODE = USBMODE_CM_DEVICE; - dcd_reg->OTGSC = OTGSC_VBUS_DISCHARGE | OTGSC_OTG_TERMINATION; - -#if !TUD_OPT_HIGH_SPEED - dcd_reg->PORTSC1 = PORTSC1_FORCE_FULL_SPEED; -#endif - - CleanInvalidateDCache_by_Addr((uint32_t*) &_dcd_data, sizeof(dcd_data_t)); - - dcd_reg->ENDPTLISTADDR = (uint32_t) _dcd_data.qhd; // Endpoint List Address has to be 2K alignment - dcd_reg->USBSTS = dcd_reg->USBSTS; - dcd_reg->USBINTR = INTR_USB | INTR_ERROR | INTR_PORT_CHANGE | INTR_SUSPEND; - - dcd_reg->USBCMD &= ~0x00FF0000; // Interrupt Threshold Interval = 0 - dcd_reg->USBCMD |= USBCMD_RUN_STOP; // Connect -} - -void dcd_int_enable(uint8_t rhport) -{ - NVIC_EnableIRQ(_dcd_controller[rhport].irqnum); -} - -void dcd_int_disable(uint8_t rhport) -{ - NVIC_DisableIRQ(_dcd_controller[rhport].irqnum); -} - -void dcd_set_address(uint8_t rhport, uint8_t dev_addr) -{ - // Response with status first before changing device address - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); - - dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; - dcd_reg->DEVICEADDR = (dev_addr << 25) | TU_BIT(24); -} - -void dcd_remote_wakeup(uint8_t rhport) -{ - dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; - dcd_reg->PORTSC1 |= PORTSC1_FORCE_PORT_RESUME; -} - -void dcd_connect(uint8_t rhport) -{ - dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; - dcd_reg->USBCMD |= USBCMD_RUN_STOP; -} - -void dcd_disconnect(uint8_t rhport) -{ - dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; - dcd_reg->USBCMD &= ~USBCMD_RUN_STOP; -} - -void dcd_sof_enable(uint8_t rhport, bool en) -{ - (void) rhport; - (void) en; - - // TODO implement later -} - -//--------------------------------------------------------------------+ -// HELPER -//--------------------------------------------------------------------+ - -static void qtd_init(dcd_qtd_t* p_qtd, void * data_ptr, uint16_t total_bytes) -{ - // Force the CPU to flush the buffer. We increase the size by 31 because the call aligns the - // address to 32-byte boundaries. Buffer must be word aligned - CleanInvalidateDCache_by_Addr((uint32_t*) tu_align((uint32_t) data_ptr, 4), total_bytes + 31); - - tu_memclr(p_qtd, sizeof(dcd_qtd_t)); - - p_qtd->next = QTD_NEXT_INVALID; - p_qtd->active = 1; - p_qtd->total_bytes = p_qtd->expected_bytes = total_bytes; - p_qtd->int_on_complete = true; - - if (data_ptr != NULL) - { - p_qtd->buffer[0] = (uint32_t) data_ptr; - - uint32_t const bufend = p_qtd->buffer[0] + total_bytes; - for(uint8_t i=1; i<5; i++) - { - uint32_t const next_page = tu_align4k( p_qtd->buffer[i-1] ) + 4096; - if ( bufend <= next_page ) break; - - p_qtd->buffer[i] = next_page; - - // TODO page[1] FRAME_N for ISO transfer - } - } -} - -//--------------------------------------------------------------------+ -// DCD Endpoint Port -//--------------------------------------------------------------------+ -void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) -{ - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - - dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; - dcd_reg->ENDPTCTRL[epnum] |= ENDPTCTRL_STALL << (dir ? 16 : 0); - - // flush to abort any primed buffer - dcd_reg->ENDPTFLUSH = TU_BIT(epnum + (dir ? 16 : 0)); -} - -void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) -{ - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - - // data toggle also need to be reset - dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; - dcd_reg->ENDPTCTRL[epnum] |= ENDPTCTRL_TOGGLE_RESET << ( dir ? 16 : 0 ); - dcd_reg->ENDPTCTRL[epnum] &= ~(ENDPTCTRL_STALL << ( dir ? 16 : 0)); -} - -bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) -{ - uint8_t const epnum = tu_edpt_number(p_endpoint_desc->bEndpointAddress); - uint8_t const dir = tu_edpt_dir(p_endpoint_desc->bEndpointAddress); - - // Must not exceed max endpoint number - TU_ASSERT( epnum < _dcd_controller[rhport].ep_count ); - - //------------- Prepare Queue Head -------------// - dcd_qhd_t * p_qhd = &_dcd_data.qhd[epnum][dir]; - tu_memclr(p_qhd, sizeof(dcd_qhd_t)); - - p_qhd->zero_length_termination = 1; - p_qhd->max_packet_size = tu_edpt_packet_size(p_endpoint_desc); - if (p_endpoint_desc->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) - { - p_qhd->iso_mult = 1; - } - - p_qhd->qtd_overlay.next = QTD_NEXT_INVALID; - - CleanInvalidateDCache_by_Addr((uint32_t*) &_dcd_data, sizeof(dcd_data_t)); - - // Enable EP Control - dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; - - uint32_t const epctrl = (p_endpoint_desc->bmAttributes.xfer << ENDPTCTRL_TYPE_POS) | ENDPTCTRL_ENABLE | ENDPTCTRL_TOGGLE_RESET; - - if ( dir == TUSB_DIR_OUT ) - { - dcd_reg->ENDPTCTRL[epnum] = (dcd_reg->ENDPTCTRL[epnum] & 0xFFFF0000u) | epctrl; - }else - { - dcd_reg->ENDPTCTRL[epnum] = (dcd_reg->ENDPTCTRL[epnum] & 0x0000FFFFu) | (epctrl << 16); - } - - return true; -} - -void dcd_edpt_close_all (uint8_t rhport) -{ - dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; - - // Disable all non-control endpoints - for( uint8_t epnum=1; epnum < _dcd_controller[rhport].ep_count; epnum++) - { - _dcd_data.qhd[epnum][TUSB_DIR_OUT].qtd_overlay.halted = 1; - _dcd_data.qhd[epnum][TUSB_DIR_IN ].qtd_overlay.halted = 1; - - dcd_reg->ENDPTFLUSH = TU_BIT(epnum) | TU_BIT(epnum+16); - dcd_reg->ENDPTCTRL[epnum] = (TUSB_XFER_BULK << ENDPTCTRL_TYPE_POS) | (TUSB_XFER_BULK << (16+ENDPTCTRL_TYPE_POS)); - } -} - -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) -{ - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - - dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; - - _dcd_data.qhd[epnum][dir].qtd_overlay.halted = 1; - - // Flush EP - uint32_t const flush_mask = TU_BIT(epnum + (dir ? 16 : 0)); - dcd_reg->ENDPTFLUSH = flush_mask; - while(dcd_reg->ENDPTFLUSH & flush_mask); - - // Clear EP enable - dcd_reg->ENDPTCTRL[epnum] &=~(ENDPTCTRL_ENABLE << (dir ? 16 : 0)); -} - -static void qhd_start_xfer(uint8_t rhport, uint8_t epnum, uint8_t dir) -{ - dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; - dcd_qhd_t* p_qhd = &_dcd_data.qhd[epnum][dir]; - dcd_qtd_t* p_qtd = &_dcd_data.qtd[epnum][dir]; - - p_qhd->qtd_overlay.halted = false; // clear any previous error - p_qhd->qtd_overlay.next = (uint32_t) p_qtd; // link qtd to qhd - - // flush cache - CleanInvalidateDCache_by_Addr((uint32_t*) &_dcd_data, sizeof(dcd_data_t)); - - if ( epnum == 0 ) - { - // follows UM 24.10.8.1.1 Setup packet handling using setup lockout mechanism - // wait until ENDPTSETUPSTAT before priming data/status in response TODO add time out - while(dcd_reg->ENDPTSETUPSTAT & TU_BIT(0)) {} - } - - // start transfer - dcd_reg->ENDPTPRIME = TU_BIT(epnum + (dir ? 16 : 0)); -} - -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) -{ - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - - dcd_qhd_t* p_qhd = &_dcd_data.qhd[epnum][dir]; - dcd_qtd_t* p_qtd = &_dcd_data.qtd[epnum][dir]; - - // Prepare qtd - qtd_init(p_qtd, buffer, total_bytes); - - // Start qhd transfer - p_qhd->ff = NULL; - qhd_start_xfer(rhport, epnum, dir); - - return true; -} - -// fifo has to be aligned to 4k boundary -bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) -{ - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - - dcd_qhd_t * p_qhd = &_dcd_data.qhd[epnum][dir]; - dcd_qtd_t * p_qtd = &_dcd_data.qtd[epnum][dir]; - - tu_fifo_buffer_info_t fifo_info; - - if (dir) - { - tu_fifo_get_read_info(ff, &fifo_info); - } else - { - tu_fifo_get_write_info(ff, &fifo_info); - } - - if ( fifo_info.len_lin >= total_bytes ) - { - // Linear length is enough for this transfer - qtd_init(p_qtd, fifo_info.ptr_lin, total_bytes); - } - else - { - // linear part is not enough - - // prepare TD up to linear length - qtd_init(p_qtd, fifo_info.ptr_lin, fifo_info.len_lin); - - if ( !tu_offset4k((uint32_t) fifo_info.ptr_wrap) && !tu_offset4k(tu_fifo_depth(ff)) ) - { - // If buffer is aligned to 4K & buffer size is multiple of 4K - // We can make use of buffer page array to also combine the linear + wrapped length - p_qtd->total_bytes = p_qtd->expected_bytes = total_bytes; - - for(uint8_t i = 1, page = 0; i < 5; i++) - { - // pick up buffer array where linear ends - if (p_qtd->buffer[i] == 0) - { - p_qtd->buffer[i] = (uint32_t) fifo_info.ptr_wrap + 4096 * page; - page++; - } - } - - CleanInvalidateDCache_by_Addr((uint32_t*) tu_align((uint32_t) fifo_info.ptr_wrap, 4), total_bytes - fifo_info.len_wrap + 31); - } - else - { - // TODO we may need to carry the wrapped length after the linear part complete - // for now only transfer up to linear part - } - } - - // Start qhd transfer - p_qhd->ff = ff; - qhd_start_xfer(rhport, epnum, dir); - - return true; -} - -//--------------------------------------------------------------------+ -// ISR -//--------------------------------------------------------------------+ - -static void process_edpt_complete_isr(uint8_t rhport, uint8_t epnum, uint8_t dir) -{ - dcd_qhd_t * p_qhd = &_dcd_data.qhd[epnum][dir]; - dcd_qtd_t * p_qtd = &_dcd_data.qtd[epnum][dir]; - - uint8_t result = p_qtd->halted ? XFER_RESULT_STALLED : - ( p_qtd->xact_err || p_qtd->buffer_err ) ? XFER_RESULT_FAILED : XFER_RESULT_SUCCESS; - - if ( result != XFER_RESULT_SUCCESS ) - { - dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; - // flush to abort error buffer - dcd_reg->ENDPTFLUSH = TU_BIT(epnum + (dir ? 16 : 0)); - } - - uint16_t const xferred_bytes = p_qtd->expected_bytes - p_qtd->total_bytes; - - if (p_qhd->ff) - { - if (dir == TUSB_DIR_IN) - { - tu_fifo_advance_read_pointer(p_qhd->ff, xferred_bytes); - } else - { - tu_fifo_advance_write_pointer(p_qhd->ff, xferred_bytes); - } - } - - // only number of bytes in the IOC qtd - dcd_event_xfer_complete(rhport, tu_edpt_addr(epnum, dir), xferred_bytes, result, true); -} - -void dcd_int_handler(uint8_t rhport) -{ - dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; - - uint32_t const int_enable = dcd_reg->USBINTR; - uint32_t const int_status = dcd_reg->USBSTS & int_enable; - dcd_reg->USBSTS = int_status; // Acknowledge handled interrupt - - // disabled interrupt sources - if (int_status == 0) return; - - // Set if the port controller enters the full or high-speed operational state. - // either from Bus Reset or Suspended state - if (int_status & INTR_PORT_CHANGE) - { - // TU_LOG2("PortChange %08lx\r\n", dcd_reg->PORTSC1); - - // Reset interrupt is not enabled, we manually check if Port Change is due - // to connection / disconnection - if ( dcd_reg->USBSTS & INTR_RESET ) - { - dcd_reg->USBSTS = INTR_RESET; - - if (dcd_reg->PORTSC1 & PORTSC1_CURRENT_CONNECT_STATUS) - { - uint32_t const speed = (dcd_reg->PORTSC1 & PORTSC1_PORT_SPEED) >> PORTSC1_PORT_SPEED_POS; - bus_reset(rhport); - dcd_event_bus_reset(rhport, (tusb_speed_t) speed, true); - }else - { - dcd_event_bus_signal(rhport, DCD_EVENT_UNPLUGGED, true); - } - } - else - { - // Triggered by resuming from suspended state - if ( !(dcd_reg->PORTSC1 & PORTSC1_SUSPEND) ) - { - dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true); - } - } - } - - if (int_status & INTR_SUSPEND) - { - // TU_LOG2("Suspend %08lx\r\n", dcd_reg->PORTSC1); - - if (dcd_reg->PORTSC1 & PORTSC1_SUSPEND) - { - // Note: Host may delay more than 3 ms before and/or after bus reset before doing enumeration. - // Skip suspend event if we are not addressed - if ((dcd_reg->DEVICEADDR >> 25) & 0x0f) - { - dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true); - } - } - } - - if (int_status & INTR_USB) - { - // Make sure we read the latest version of _dcd_data. - CleanInvalidateDCache_by_Addr((uint32_t*) &_dcd_data, sizeof(dcd_data_t)); - - uint32_t const edpt_complete = dcd_reg->ENDPTCOMPLETE; - dcd_reg->ENDPTCOMPLETE = edpt_complete; // acknowledge - - if (dcd_reg->ENDPTSETUPSTAT) - { - //------------- Set up Received -------------// - // 23.10.10.2 Operational model for setup transfers - dcd_reg->ENDPTSETUPSTAT = dcd_reg->ENDPTSETUPSTAT; - - dcd_event_setup_received(rhport, (uint8_t*)(uintptr_t) &_dcd_data.qhd[0][0].setup_request, true); - } - - // 23.10.12.3 Failed QTD also get ENDPTCOMPLETE set - // nothing to do, we will submit xfer as error to usbd - // if (int_status & INTR_ERROR) { } - - if ( edpt_complete ) - { - for(uint8_t epnum = 0; epnum < TUP_DCD_ENDPOINT_MAX; epnum++) - { - if ( tu_bit_test(edpt_complete, epnum) ) process_edpt_complete_isr(rhport, epnum, TUSB_DIR_OUT); - if ( tu_bit_test(edpt_complete, epnum+16) ) process_edpt_complete_isr(rhport, epnum, TUSB_DIR_IN); - } - } - } - - if (int_status & INTR_SOF) - { - dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true); - } -} - -#endif diff --git a/src/portable/nxp/transdimension/hcd_transdimension.c b/src/portable/nxp/transdimension/hcd_transdimension.c deleted file mode 100644 index 0b3e9e4ef..000000000 --- a/src/portable/nxp/transdimension/hcd_transdimension.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "tusb_option.h" - -// NXP Trans-Dimension USB IP implement EHCI for host functionality - -#if CFG_TUH_ENABLED && \ - (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT) - -#warning "transdimenion is renamed to chipidea (portable/chipidea/ci_hs) to match other opensource naming convention such as linux. This file will be removed in the future, please update your makefile accordingly" - -//--------------------------------------------------------------------+ -// INCLUDE -//--------------------------------------------------------------------+ -#if CFG_TUSB_MCU == OPT_MCU_MIMXRT - #include "fsl_device_registers.h" -#else - // LPCOpen for 18xx & 43xx - #include "chip.h" -#endif - -#include "common/tusb_common.h" -#include "common_transdimension.h" -#include "portable/ehci/ehci_api.h" - -//--------------------------------------------------------------------+ -// MACRO CONSTANT TYPEDEF -//--------------------------------------------------------------------+ - -// TODO can be merged with dcd_controller_t -typedef struct -{ - uint32_t regs_base; // registers base - const IRQn_Type irqnum; // IRQ number -}hcd_controller_t; - -#if CFG_TUSB_MCU == OPT_MCU_MIMXRT - static const hcd_controller_t _hcd_controller[] = - { - // RT1010 and RT1020 only has 1 USB controller - #if FSL_FEATURE_SOC_USBHS_COUNT == 1 - { .regs_base = USB_BASE , .irqnum = USB_OTG1_IRQn } - #else - { .regs_base = USB1_BASE, .irqnum = USB_OTG1_IRQn }, - { .regs_base = USB2_BASE, .irqnum = USB_OTG2_IRQn } - #endif - }; - -#else - static const hcd_controller_t _hcd_controller[] = - { - { .regs_base = LPC_USB0_BASE, .irqnum = USB0_IRQn }, - { .regs_base = LPC_USB1_BASE, .irqnum = USB1_IRQn } - }; -#endif - -//--------------------------------------------------------------------+ -// Controller API -//--------------------------------------------------------------------+ - -bool hcd_init(uint8_t rhport) -{ - hcd_registers_t* hcd_reg = (hcd_registers_t*) _hcd_controller[rhport].regs_base; - - // Reset controller - hcd_reg->USBCMD |= USBCMD_RESET; - while( hcd_reg->USBCMD & USBCMD_RESET ) {} - - // Set mode to device, must be set immediately after reset -#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX - // LPC18XX/43XX need to set VBUS Power Select to HIGH - // RHPORT1 is fullspeed only (need external PHY for Highspeed) - hcd_reg->USBMODE = USBMODE_CM_HOST | USBMODE_VBUS_POWER_SELECT; - if (rhport == 1) hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; -#else - hcd_reg->USBMODE = USBMODE_CM_HOST; -#endif - - // FIXME force full speed, still have issue with Highspeed enumeration - hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; - - return ehci_init(rhport, (uint32_t) &hcd_reg->CAPLENGTH, (uint32_t) &hcd_reg->USBCMD); -} - -void hcd_int_enable(uint8_t rhport) -{ - NVIC_EnableIRQ(_hcd_controller[rhport].irqnum); -} - -void hcd_int_disable(uint8_t rhport) -{ - NVIC_DisableIRQ(_hcd_controller[rhport].irqnum); -} - -#endif |