diff options
| -rw-r--r-- | .idea/cmake.xml | 1 | ||||
| -rw-r--r-- | hw/bsp/family_support.cmake | 12 | ||||
| -rw-r--r-- | hw/bsp/kinetis_k/FreeRTOSConfig/FreeRTOSConfig.h | 165 | ||||
| -rw-r--r-- | hw/bsp/kinetis_k/boards/teensy_35/board.cmake | 17 | ||||
| -rw-r--r-- | hw/bsp/kinetis_k/boards/teensy_35/board.h | 48 | ||||
| -rw-r--r-- | hw/bsp/kinetis_k/boards/teensy_35/board.mk | 23 | ||||
| -rw-r--r-- | hw/bsp/kinetis_k/boards/teensy_35/board/clock_config.c | 186 | ||||
| -rw-r--r-- | hw/bsp/kinetis_k/boards/teensy_35/board/clock_config.h | 69 | ||||
| -rw-r--r-- | hw/bsp/kinetis_k/boards/teensy_35/board/pin_mux.c | 61 | ||||
| -rw-r--r-- | hw/bsp/kinetis_k/boards/teensy_35/board/pin_mux.h | 45 | ||||
| -rw-r--r-- | hw/bsp/kinetis_k/boards/teensy_35/teensy_35.mex | 184 | ||||
| -rw-r--r-- | hw/bsp/kinetis_k/family.c | 142 | ||||
| -rw-r--r-- | hw/bsp/kinetis_k/family.cmake | 112 | ||||
| -rw-r--r-- | hw/bsp/kinetis_k/family.mk | 34 | ||||
| -rw-r--r-- | tools/get_deps.py | 2 |
15 files changed, 1100 insertions, 1 deletions
diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 788f70433..e8f65dcce 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -39,6 +39,7 @@ <configuration PROFILE_NAME="b_g474e_dpow1" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=b_g474e_dpow1 -DLOG=3 -DLOGGER=RTT" /> <configuration PROFILE_NAME="b_g474e_dpow1 iar" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=b_g474e_dpow1 -DTOOLCHAIN=iar" /> <configuration PROFILE_NAME="frdm_kl25z" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=frdm_kl25z -DLOG=3 -DLOGGER=RTT" /> + <configuration PROFILE_NAME="teensy_35" ENABLED="true" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=teensy_35" /> <configuration PROFILE_NAME="stm32h743eval" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32h743eval -DLOG=3 -DLOGGER=RTT -DTRACE_ETM=1" /> <configuration PROFILE_NAME="stm32f072disco" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32f072disco" /> <configuration PROFILE_NAME="stm32f103_mini_2" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32f103_mini_2" /> diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index b2e61a824..b8cbbee38 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -379,6 +379,18 @@ function(family_flash_pyocd TARGET) endfunction() +# Add flash teensy_cli target +function(family_flash_teensy TARGET) + if (NOT DEFINED TEENSY_CLI) + set(TEENSY_CLI teensy_loader_cli) + endif () + + add_custom_target(${TARGET}-teensy + DEPENDS ${TARGET} + COMMAND ${TEENSY_CLI} --mcu=${TEENSY_MCU} -w -s $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.hex + ) +endfunction() + # Add flash using NXP's LinkServer (redserver) # https://www.nxp.com/design/software/development-software/mcuxpresso-software-and-tools-/linkserver-for-microcontrollers:LINKERSERVER function(family_flash_nxplink TARGET) diff --git a/hw/bsp/kinetis_k/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/kinetis_k/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..a46af1759 --- /dev/null +++ b/hw/bsp/kinetis_k/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,165 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "fsl_device_registers.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 2 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 0 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 2 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<<configPRIO_BITS) - 1) + +/* The highest interrupt priority that can be used by any interrupt service +routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL +INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER +PRIORITY THAN THIS! (higher priorities are lower numeric values. */ +#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 2 + +/* Interrupt priorities used by the kernel port layer itself. These are generic +to all Cortex-M ports, and do not rely on any particular library functions. */ +#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! +See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ +#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +#endif /* __FREERTOS_CONFIG__H */ diff --git a/hw/bsp/kinetis_k/boards/teensy_35/board.cmake b/hw/bsp/kinetis_k/boards/teensy_35/board.cmake new file mode 100644 index 000000000..bd253d996 --- /dev/null +++ b/hw/bsp/kinetis_k/boards/teensy_35/board.cmake @@ -0,0 +1,17 @@ +set(MCU_VARIANT MK64F12) + +set(JLINK_DEVICE MK64FX512xxx12) +set(TEENSY_MCU TEENSY35) +set(PYOCD_TARGET k64f) + +set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/MK64FX512xxx12_flash.ld) + +function(update_board TARGET) + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/board/pin_mux.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/board/clock_config.c + ) + target_compile_definitions(${TARGET} PUBLIC + CPU_MK64FX512VMD12 + ) +endfunction() diff --git a/hw/bsp/kinetis_k/boards/teensy_35/board.h b/hw/bsp/kinetis_k/boards/teensy_35/board.h new file mode 100644 index 000000000..f8173447a --- /dev/null +++ b/hw/bsp/kinetis_k/boards/teensy_35/board.h @@ -0,0 +1,48 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef BOARD_H +#define BOARD_H + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ +// LED +#define LED_PORT GPIOC +#define LED_PIN 5 +#define LED_STATE_ON 1 + +// Button + +// UART +//#define UART_PORT UART0 +//#define UART_PIN_CLOCK kCLOCK_PortA +//#define UART_PIN_PORT PORTA +//#define UART_PIN_RX 1u +//#define UART_PIN_TX 2u +//#define UART_PIN_FUNCTION kPORT_MuxAlt2 +//#define SOPT5_UART0RXSRC_UART_RX 0x00u /*!< UART0 receive data source select: UART0_RX pin */ +//#define SOPT5_UART0TXSRC_UART_TX 0x00u /*!< UART0 transmit data source select: UART0_TX pin */ + +#endif diff --git a/hw/bsp/kinetis_k/boards/teensy_35/board.mk b/hw/bsp/kinetis_k/boards/teensy_35/board.mk new file mode 100644 index 000000000..2c4f87c25 --- /dev/null +++ b/hw/bsp/kinetis_k/boards/teensy_35/board.mk @@ -0,0 +1,23 @@ +MCU_VARIANT = MK64F12 + +CFLAGS += \ + -DCPU_MK64FX512VMD12 \ + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=format -Wno-error=redundant-decls + +SRC_C += \ + $(BOARD_PATH)/board/clock_config.c \ + $(BOARD_PATH)/board/pin_mux.c \ + +LD_FILE = ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/MK64FX512xxx12_flash.ld + +# For flash-jlink target +JLINK_DEVICE = MK64FX512xxx12 + +# For flash-pyocd target +PYOCD_TARGET = k64f + +# flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli +flash: $(BUILD)/$(PROJECT).hex + teensy_loader_cli --mcu=TEENSY35 -v -w $< diff --git a/hw/bsp/kinetis_k/boards/teensy_35/board/clock_config.c b/hw/bsp/kinetis_k/boards/teensy_35/board/clock_config.c new file mode 100644 index 000000000..b69d10ccb --- /dev/null +++ b/hw/bsp/kinetis_k/boards/teensy_35/board/clock_config.c @@ -0,0 +1,186 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ +/* + * How to setup clock using clock driver functions: + * + * 1. CLOCK_SetSimSafeDivs, to make sure core clock, bus clock, flexbus clock + * and flash clock are in allowed range during clock mode switch. + * + * 2. Call CLOCK_Osc0Init to setup OSC clock, if it is used in target mode. + * + * 3. Set MCG configuration, MCG includes three parts: FLL clock, PLL clock and + * internal reference clock(MCGIRCLK). Follow the steps to setup: + * + * 1). Call CLOCK_BootToXxxMode to set MCG to target mode. + * + * 2). If target mode is FBI/BLPI/PBI mode, the MCGIRCLK has been configured + * correctly. For other modes, need to call CLOCK_SetInternalRefClkConfig + * explicitly to setup MCGIRCLK. + * + * 3). Don't need to configure FLL explicitly, because if target mode is FLL + * mode, then FLL has been configured by the function CLOCK_BootToXxxMode, + * if the target mode is not FLL mode, the FLL is disabled. + * + * 4). If target mode is PEE/PBE/PEI/PBI mode, then the related PLL has been + * setup by CLOCK_BootToXxxMode. In FBE/FBI/FEE/FBE mode, the PLL could + * be enabled independently, call CLOCK_EnablePll0 explicitly in this case. + * + * 4. Call CLOCK_SetSimConfig to set the clock configuration in SIM. + */ + +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v11.0 +processor: MK64FX512xxx12 +package_id: MK64FX512VLQ12 +mcu_data: ksdk2_0 +processor_version: 13.0.1 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +#include "clock_config.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define MCG_IRCLK_DISABLE 0U /*!< MCGIRCLK disabled */ +#define OSC_CAP0P 0U /*!< Oscillator 0pF capacitor load */ +#define OSC_ER_CLK_DISABLE 0U /*!< Disable external reference clock */ +#define SIM_OSC32KSEL_OSC32KCLK_CLK 0U /*!< OSC32KSEL select: OSC32KCLK clock */ +#define SIM_PLLFLLSEL_MCGPLLCLK_CLK 1U /*!< PLLFLL select: MCGPLLCLK clock */ +#define SIM_USB_CLK_120000000HZ 120000000U /*!< Input SIM frequency for USB: 120000000Hz */ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + * Code + ******************************************************************************/ +/*FUNCTION********************************************************************** + * + * Function Name : CLOCK_CONFIG_SetFllExtRefDiv + * Description : Configure FLL external reference divider (FRDIV). + * Param frdiv : The value to set FRDIV. + * + *END**************************************************************************/ +static void CLOCK_CONFIG_SetFllExtRefDiv(uint8_t frdiv) +{ + MCG->C1 = ((MCG->C1 & ~MCG_C1_FRDIV_MASK) | MCG_C1_FRDIV(frdiv)); +} + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockRUN(); +} + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockRUN +called_from_default_init: true +outputs: +- {id: Bus_clock.outFreq, value: 60 MHz} +- {id: Core_clock.outFreq, value: 120 MHz} +- {id: Flash_clock.outFreq, value: 24 MHz} +- {id: FlexBus_clock.outFreq, value: 40 MHz} +- {id: LPO_clock.outFreq, value: 1 kHz} +- {id: MCGFFCLK.outFreq, value: 500 kHz} +- {id: PLLFLLCLK.outFreq, value: 120 MHz} +- {id: System_clock.outFreq, value: 120 MHz} +- {id: USB48MCLK.outFreq, value: 48 MHz} +settings: +- {id: MCGMode, value: PEE} +- {id: MCG.FRDIV.scale, value: '32'} +- {id: MCG.IREFS.sel, value: MCG.FRDIV} +- {id: MCG.PLLS.sel, value: MCG.PLL} +- {id: MCG.PRDIV.scale, value: '4'} +- {id: MCG.VDIV.scale, value: '30'} +- {id: MCG_C2_RANGE0_CFG, value: Very_high} +- {id: MCG_C2_RANGE0_FRDIV_CFG, value: Very_high} +- {id: MCG_C5_PLLCLKEN0_CFG, value: Enabled} +- {id: RTC_CR_CLKO_CFG, value: Disabled} +- {id: RTC_CR_OSC_CAP_LOAD_CFG, value: SC10PF} +- {id: SIM.OUTDIV2.scale, value: '2'} +- {id: SIM.OUTDIV3.scale, value: '3'} +- {id: SIM.OUTDIV4.scale, value: '5'} +- {id: SIM.PLLFLLSEL.sel, value: MCG.MCGPLLCLK} +- {id: SIM.USBDIV.scale, value: '5'} +- {id: SIM.USBFRAC.scale, value: '2'} +- {id: SIM.USBSRCSEL.sel, value: SIM.USBDIV} +- {id: USBClkConfig, value: 'yes'} +sources: +- {id: OSC.OSC.outFreq, value: 16 MHz, enabled: true} +- {id: RTC.RTC32kHz.outFreq, value: 32.768 kHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ +const mcg_config_t mcgConfig_BOARD_BootClockRUN = + { + .mcgMode = kMCG_ModePEE, /* PEE - PLL Engaged External */ + .irclkEnableMode = MCG_IRCLK_DISABLE, /* MCGIRCLK disabled */ + .ircs = kMCG_IrcSlow, /* Slow internal reference clock selected */ + .fcrdiv = 0x1U, /* Fast IRC divider: divided by 2 */ + .frdiv = 0x0U, /* FLL reference clock divider: divided by 32 */ + .drs = kMCG_DrsLow, /* Low frequency range */ + .dmx32 = kMCG_Dmx32Default, /* DCO has a default range of 25% */ + .oscsel = kMCG_OscselOsc, /* Selects System Oscillator (OSCCLK) */ + .pll0Config = + { + .enableMode = kMCG_PllEnableIndependent,/* MCGPLLCLK enabled independent of MCG clock mode, MCGPLLCLK disabled in STOP mode */ + .prdiv = 0x3U, /* PLL Reference divider: divided by 4 */ + .vdiv = 0x6U, /* VCO divider: multiplied by 30 */ + }, + }; +const sim_clock_config_t simConfig_BOARD_BootClockRUN = + { + .pllFllSel = SIM_PLLFLLSEL_MCGPLLCLK_CLK, /* PLLFLL select: MCGPLLCLK clock */ + .er32kSrc = SIM_OSC32KSEL_OSC32KCLK_CLK, /* OSC32KSEL select: OSC32KCLK clock */ + .clkdiv1 = 0x1240000U, /* SIM_CLKDIV1 - OUTDIV1: /1, OUTDIV2: /2, OUTDIV3: /3, OUTDIV4: /5 */ + }; +const osc_config_t oscConfig_BOARD_BootClockRUN = + { + .freq = 16000000U, /* Oscillator frequency: 16000000Hz */ + .capLoad = (OSC_CAP0P), /* Oscillator capacity load: 0pF */ + .workMode = kOSC_ModeExt, /* Use external clock */ + .oscerConfig = + { + .enableMode = OSC_ER_CLK_DISABLE, /* Disable external reference clock */ + } + }; + +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + /* Set the system clock dividers in SIM to safe value. */ + CLOCK_SetSimSafeDivs(); + /* Initializes OSC0 according to board configuration. */ + CLOCK_InitOsc0(&oscConfig_BOARD_BootClockRUN); + CLOCK_SetXtal0Freq(oscConfig_BOARD_BootClockRUN.freq); + /* Configure FLL external reference divider (FRDIV). */ + CLOCK_CONFIG_SetFllExtRefDiv(mcgConfig_BOARD_BootClockRUN.frdiv); + /* Set MCG to PEE mode. */ + CLOCK_BootToPeeMode(mcgConfig_BOARD_BootClockRUN.oscsel, + kMCG_PllClkSelPll0, + &mcgConfig_BOARD_BootClockRUN.pll0Config); + /* Set the clock configuration in SIM module. */ + CLOCK_SetSimConfig(&simConfig_BOARD_BootClockRUN); + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; + /* Enable USB FS clock. */ + CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcPll0, SIM_USB_CLK_120000000HZ); +} diff --git a/hw/bsp/kinetis_k/boards/teensy_35/board/clock_config.h b/hw/bsp/kinetis_k/boards/teensy_35/board/clock_config.h new file mode 100644 index 000000000..8601da9c2 --- /dev/null +++ b/hw/bsp/kinetis_k/boards/teensy_35/board/clock_config.h @@ -0,0 +1,69 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 16000000U /*!< Board xtal0 frequency in Hz */ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockRUN configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 120000000U /*!< Core clock frequency: 120000000Hz */ + +/*! @brief MCG set for BOARD_BootClockRUN configuration. + */ +extern const mcg_config_t mcgConfig_BOARD_BootClockRUN; +/*! @brief SIM module set for BOARD_BootClockRUN configuration. + */ +extern const sim_clock_config_t simConfig_BOARD_BootClockRUN; +/*! @brief OSC set for BOARD_BootClockRUN configuration. + */ +extern const osc_config_t oscConfig_BOARD_BootClockRUN; + +/******************************************************************************* + * API for BOARD_BootClockRUN configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockRUN(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/kinetis_k/boards/teensy_35/board/pin_mux.c b/hw/bsp/kinetis_k/boards/teensy_35/board/pin_mux.c new file mode 100644 index 000000000..d2c51e5c6 --- /dev/null +++ b/hw/bsp/kinetis_k/boards/teensy_35/board/pin_mux.c @@ -0,0 +1,61 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v13.1 +processor: MK64FX512xxx12 +package_id: MK64FX512VLQ12 +mcu_data: ksdk2_0 +processor_version: 13.0.1 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +#include "fsl_common.h" +#include "fsl_port.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) +{ + BOARD_InitPins(); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} +- pin_list: + - {pin_num: '110', peripheral: GPIOC, signal: 'GPIO, 5', pin_signal: PTC5/LLWU_P9/SPI0_SCK/LPTMR0_ALT2/I2S0_RXD0/FB_AD10/CMP0_OUT/FTM0_CH2} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitPins(void) +{ + /* Port C Clock Gate Control: Clock enabled */ + CLOCK_EnableClock(kCLOCK_PortC); + + /* PORTC5 (pin 110) is configured as PTC5 */ + PORT_SetPinMux(PORTC, 5U, kPORT_MuxAsGpio); +} +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/kinetis_k/boards/teensy_35/board/pin_mux.h b/hw/bsp/kinetis_k/boards/teensy_35/board/pin_mux.h new file mode 100644 index 000000000..598ae8e9f --- /dev/null +++ b/hw/bsp/kinetis_k/boards/teensy_35/board/pin_mux.h @@ -0,0 +1,45 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/kinetis_k/boards/teensy_35/teensy_35.mex b/hw/bsp/kinetis_k/boards/teensy_35/teensy_35.mex new file mode 100644 index 000000000..52a087026 --- /dev/null +++ b/hw/bsp/kinetis_k/boards/teensy_35/teensy_35.mex @@ -0,0 +1,184 @@ +<?xml version="1.0" encoding= "UTF-8" ?> +<configuration name="MK64FX512xxx12" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="9011274c-fba8-40d5-b5c6-83fae0667023" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> + <common> + <processor>MK64FX512xxx12</processor> + <package>MK64FX512VLQ12</package> + <mcu_data>ksdk2_0</mcu_data> + <cores selected="core0"> + <core name="Cortex-M4F" id="core0" description="M4 core"/> + </cores> + <description></description> + </common> + <preferences> + <validate_boot_init_only>true</validate_boot_init_only> + <generate_extended_information>false</generate_extended_information> + <generate_code_modified_registers_only>false</generate_code_modified_registers_only> + <update_include_paths>true</update_include_paths> + <generate_registers_defines>false</generate_registers_defines> + </preferences> + <tools> + <pins name="Pins" version="13.1" enabled="true" update_project_code="true"> + <generated_project_files> + <file path="board/pin_mux.c" update_enabled="true"/> + <file path="board/pin_mux.h" update_enabled="true"/> + </generated_project_files> + <pins_profile> + <processor_version>13.0.1</processor_version> + </pins_profile> + <functions_list> + <function name="BOARD_InitPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins"> + <feature name="enabled" evaluation="equal" configuration="core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.port" description="Pins initialization requires the PORT Driver in the project." problem_level="2" source="Pins:BOARD_InitPins"> + <feature name="enabled" evaluation="equal" configuration="core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="GPIOC" signal="GPIO, 5" pin_num="110" pin_signal="PTC5/LLWU_P9/SPI0_SCK/LPTMR0_ALT2/I2S0_RXD0/FB_AD10/CMP0_OUT/FTM0_CH2"/> + </pins> + </function> + </functions_list> + </pins> + <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true"> + <generated_project_files> + <file path="board/clock_config.c" update_enabled="true"/> + <file path="board/clock_config.h" update_enabled="true"/> + </generated_project_files> + <clocks_profile> + <processor_version>13.0.1</processor_version> + </clocks_profile> + <clock_configurations> + <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="PinSignal" resourceId="OSC.EXTAL0" description="'EXTAL0' (Pins tool id: OSC.EXTAL0, Clocks tool id: OSC.EXTAL0) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="OSC.EXTAL0" description="'EXTAL0' (Pins tool id: OSC.EXTAL0, Clocks tool id: OSC.EXTAL0) needs to have 'INPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockRUN"> + <feature name="direction" evaluation=""> + <data>INPUT</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN"> + <feature name="enabled" evaluation="equal" configuration="core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources> + <clock_source id="OSC.OSC.outFreq" value="16 MHz" locked="false" enabled="true"/> + <clock_source id="RTC.RTC32kHz.outFreq" value="32.768 kHz" locked="false" enabled="true"/> + </clock_sources> + <clock_outputs> + <clock_output id="Bus_clock.outFreq" value="60 MHz" locked="false" accuracy=""/> + <clock_output id="Core_clock.outFreq" value="120 MHz" locked="false" accuracy=""/> + <clock_output id="Flash_clock.outFreq" value="24 MHz" locked="false" accuracy=""/> + <clock_output id="FlexBus_clock.outFreq" value="40 MHz" locked="false" accuracy=""/> + <clock_output id="LPO_clock.outFreq" value="1 kHz" locked="false" accuracy=""/> + <clock_output id="MCGFFCLK.outFreq" value="500 kHz" locked="false" accuracy=""/> + <clock_output id="PLLFLLCLK.outFreq" value="120 MHz" locked="false" accuracy=""/> + <clock_output id="System_clock.outFreq" value="120 MHz" locked="false" accuracy=""/> + <clock_output id="USB48MCLK.outFreq" value="48 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings> + <setting id="MCGMode" value="PEE" locked="false"/> + <setting id="MCG.FRDIV.scale" value="32" locked="false"/> + <setting id="MCG.IREFS.sel" value="MCG.FRDIV" locked="false"/> + <setting id="MCG.PLLS.sel" value="MCG.PLL" locked="false"/> + <setting id="MCG.PRDIV.scale" value="4" locked="false"/> + <setting id="MCG.VDIV.scale" value="30" locked="false"/> + <setting id="MCG_C2_RANGE0_CFG" value="Very_high" locked="false"/> + <setting id="MCG_C2_RANGE0_FRDIV_CFG" value="Very_high" locked="false"/> + <setting id="MCG_C5_PLLCLKEN0_CFG" value="Enabled" locked="false"/> + <setting id="RTC_CR_CLKO_CFG" value="Disabled" locked="false"/> + <setting id="RTC_CR_OSC_CAP_LOAD_CFG" value="SC10PF" locked="false"/> + <setting id="SIM.OUTDIV2.scale" value="2" locked="false"/> + <setting id="SIM.OUTDIV3.scale" value="3" locked="false"/> + <setting id="SIM.OUTDIV4.scale" value="5" locked="false"/> + <setting id="SIM.PLLFLLSEL.sel" value="MCG.MCGPLLCLK" locked="false"/> + <setting id="SIM.USBDIV.scale" value="5" locked="false"/> + <setting id="SIM.USBFRAC.scale" value="2" locked="false"/> + <setting id="SIM.USBSRCSEL.sel" value="SIM.USBDIV" locked="false"/> + <setting id="USBClkConfig" value="yes" locked="false"/> + </clock_settings> + <called_from_default_init>true</called_from_default_init> + </clock_configuration> + </clock_configurations> + </clocks> + <dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true"> + <generated_project_files/> + <dcdx_profile> + <processor_version>N/A</processor_version> + </dcdx_profile> + <dcdx_configurations/> + </dcdx> + <periphs name="Peripherals" version="12.0" enabled="false" update_project_code="true"> + <generated_project_files/> + <peripherals_profile> + <processor_version>13.0.1</processor_version> + </peripherals_profile> + <functional_groups> + <functional_group name="BOARD_InitPeripherals" uuid="7465f6d1-08aa-48d8-91d5-05023b3186dd" called_from_default_init="true" id_prefix="" core="core0"> + <description></description> + <options/> + <dependencies/> + <instances> + <instance name="NVIC" uuid="84184268-649a-4026-9585-21289f314135" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false"> + <config_set name="nvic"> + <array name="interrupt_table"/> + <array name="interrupts"/> + </config_set> + </instance> + </instances> + </functional_group> + </functional_groups> + <components> + <component name="system" uuid="069bcce2-44e2-4d92-af51-398354938128" type_id="system_54b53072540eeeb8f8e9343e71f28176"> + <config_set_global name="global_system_definitions"> + <setting name="user_definitions" value=""/> + <setting name="user_includes" value=""/> + </config_set_global> + </component> + <component name="msg" uuid="53b11db5-341e-452e-9e8e-d62a780aca7b" type_id="msg_6e2baaf3b97dbeef01c0043275f9a0e7"> + <config_set_global name="global_messages"/> + </component> + <component name="gpio_adapter_common" uuid="038e164b-8b7a-4d53-8d64-b52445aa6477" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6"> + <config_set_global name="global_gpio_adapter_common" quick_selection="default"/> + </component> + <component name="generic_uart" uuid="e2176f5e-bfae-44bf-9ae7-5253becdddfa" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6"> + <config_set_global name="global_uart"/> + </component> + <component name="generic_can" uuid="a8335235-50ea-4aca-a006-aa73fcd95f74" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80"> + <config_set_global name="global_can"/> + </component> + <component name="uart_cmsis_common" uuid="dd55e60e-66c0-4980-808e-fe1c012d40fc" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8"> + <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/> + </component> + <component name="generic_enet" uuid="1a0aebd1-595c-442c-9741-c377be3f6029" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619"> + <config_set_global name="global_enet"/> + </component> + </components> + </periphs> + <tee name="TEE" version="4.0" enabled="false" update_project_code="true"> + <generated_project_files/> + <tee_profile> + <processor_version>N/A</processor_version> + </tee_profile> + </tee> + </tools> +</configuration> diff --git a/hw/bsp/kinetis_k/family.c b/hw/bsp/kinetis_k/family.c new file mode 100644 index 000000000..b6e0e4093 --- /dev/null +++ b/hw/bsp/kinetis_k/family.c @@ -0,0 +1,142 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * Copyright (c) 2020, Koji Kitayama + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "bsp/board.h" +#include "board.h" +#include "fsl_device_registers.h" +#include "fsl_gpio.h" +#include "fsl_port.h" +#include "fsl_clock.h" +#include "fsl_uart.h" + +#include "board/clock_config.h" +#include "board/pin_mux.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) { +#if CFG_TUH_ENABLED + tuh_int_handler(0); +#endif +#if CFG_TUD_ENABLED + tud_int_handler(0); +#endif +} + +void board_init(void) { + BOARD_InitBootPins(); + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + + // LED + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0 }; + GPIO_PinInit(LED_PORT, LED_PIN, &led_config); + board_led_write(false); + +#if defined(BUTTON_PORT) && defined(BUTTON_PIN) + // Button + CLOCK_EnableClock(BUTTON_PIN_CLOCK); + port_pin_config_t button_port = { + .pullSelect = kPORT_PullUp, + .mux = BUTTON_PIN_FUNCTION, + }; + PORT_SetPinConfig(BUTTON_PIN_PORT, BUTTON_PIN, &button_port); + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; + GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config); +#endif + +#if 0 + // UART + CLOCK_EnableClock(UART_PIN_CLOCK); + PORT_SetPinMux(UART_PIN_PORT, UART_PIN_RX, UART_PIN_FUNCTION); + PORT_SetPinMux(UART_PIN_PORT, UART_PIN_TX, UART_PIN_FUNCTION); + SIM->SOPT5 = ((SIM->SOPT5 & + (~(SIM_SOPT5_UART0TXSRC_MASK | SIM_SOPT5_UART0RXSRC_MASK))) + | SIM_SOPT5_UART0TXSRC(SOPT5_UART0TXSRC_UART_TX) + | SIM_SOPT5_UART0RXSRC(SOPT5_UART0RXSRC_UART_RX) + ); + + lpuart_config_t uart_config; + LPUART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPUART_Init(UART_PORT, &uart_config, CLOCK_GetFreq(kCLOCK_McgIrc48MClk)); +#endif + + // USB + CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcPll0, CLOCK_GetFreq(kCLOCK_PllFllSelClk)); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { + GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); +} + +uint32_t board_button_read(void) { +#if defined(BUTTON_PORT) && defined(BUTTON_PIN) + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN); +#else + return 0; +#endif +} + +int board_uart_read(uint8_t *buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const *buf, int len) { + (void) buf; + (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} + +#endif diff --git a/hw/bsp/kinetis_k/family.cmake b/hw/bsp/kinetis_k/family.cmake new file mode 100644 index 000000000..853316c3a --- /dev/null +++ b/hw/bsp/kinetis_k/family.cmake @@ -0,0 +1,112 @@ +include_guard() + +if (NOT BOARD) + message(FATAL_ERROR "BOARD not specified") +endif () + +set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) +set(CMSIS_DIR ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS KINETIS_K CACHE INTERNAL "") + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + # driver + ${SDK_DIR}/drivers/gpio/fsl_gpio.c + ${SDK_DIR}/drivers/uart/fsl_uart.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c + ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ${SDK_DIR}/drivers/common + ${SDK_DIR}/drivers/gpio + ${SDK_DIR}/drivers/port + ${SDK_DIR}/drivers/smc + ${SDK_DIR}/drivers/uart + ) + + update_board(${BOARD_TARGET}) + + # LD_FILE and STARTUP_FILE can be defined in board.cmake + set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S) + + target_sources(${BOARD_TARGET} PUBLIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + # nanolib + --specs=nosys.specs + --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_K ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/chipidea/ci_fs/dcd_ci_fs.c + ${TOP}/src/portable/nxp/khci/hcd_khci.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_jlink(${TARGET}) + + if (DEFINED TEENSY_MCU) + family_add_bin_hex(${TARGET}) + family_flash_teensy(${TARGET}) + endif () +endfunction() diff --git a/hw/bsp/kinetis_k/family.mk b/hw/bsp/kinetis_k/family.mk new file mode 100644 index 000000000..de352a6a9 --- /dev/null +++ b/hw/bsp/kinetis_k/family.mk @@ -0,0 +1,34 @@ +SDK_DIR = hw/mcu/nxp/mcux-sdk +DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5 + +MCU_DIR = $(SDK_DIR)/devices/${MCU_VARIANT} +include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m4 + +CFLAGS += \ + -DCFG_TUSB_MCU=OPT_MCU_KINETIS_K \ + +LDFLAGS += \ + -Wl,--defsym,__stack_size__=0x400 \ + -Wl,--defsym,__heap_size__=0 + +SRC_C += \ + src/portable/nxp/khci/dcd_khci.c \ + src/portable/nxp/khci/hcd_khci.c \ + $(MCU_DIR)/system_${MCU_VARIANT}.c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(SDK_DIR)/drivers/gpio/fsl_gpio.c \ + $(SDK_DIR)/drivers/uart/fsl_uart.c \ + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(SDK_DIR)/drivers/common \ + $(TOP)/$(SDK_DIR)/drivers/gpio \ + $(TOP)/$(SDK_DIR)/drivers/port \ + $(TOP)/$(SDK_DIR)/drivers/smc \ + $(TOP)/$(SDK_DIR)/drivers/uart \ + +SRC_S += ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S diff --git a/tools/get_deps.py b/tools/get_deps.py index 9b89c5e4c..388a68c83 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -52,7 +52,7 @@ deps_optional = { 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43'], 'hw/mcu/nxp/mcux-sdk': ['https://github.com/hathach/mcux-sdk.git', '950819b7de9b32f92c3edf396bc5ffb8d66e7009', - 'kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], + 'kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/sekigon-gonnoc/Pico-PIO-USB.git', '58879cfa0eca5725d8db6443ec17f8896a321042', 'rp2040'], |