diff options
| -rw-r--r-- | hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h | 166 | ||||
| -rw-r--r-- | hw/bsp/kinetis_kl/boards/frdm_kl25z/board.cmake | 18 | ||||
| -rw-r--r-- | hw/bsp/kinetis_kl/boards/frdm_kl25z/board.h | 58 | ||||
| -rw-r--r-- | hw/bsp/kinetis_kl/boards/frdm_kl25z/board.mk | 7 | ||||
| -rw-r--r-- | hw/bsp/kinetis_kl/boards/frdm_kl25z/clock_config.c | 307 | ||||
| -rw-r--r-- | hw/bsp/kinetis_kl/boards/frdm_kl25z/clock_config.h | 130 | ||||
| -rw-r--r-- | hw/bsp/kinetis_kl/family.c (renamed from hw/bsp/kinetis_kl/boards/frdm_kl25z/frdm_kl25z.c) | 41 | ||||
| -rw-r--r-- | hw/bsp/kinetis_kl/family.cmake | 126 | ||||
| -rw-r--r-- | hw/bsp/kinetis_kl/family.mk | 24 | ||||
| -rw-r--r-- | hw/bsp/kinetis_kl/gcc/MKL25Z128xxx4_flash.ld | 253 | ||||
| -rw-r--r-- | hw/bsp/kinetis_kl/gcc/startup_MKL25Z4.S | 383 | ||||
| -rw-r--r-- | tools/get_deps.py | 3 | ||||
| -rw-r--r-- | tools/get_family_deps.py | 21 |
13 files changed, 1464 insertions, 73 deletions
diff --git a/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..960bb23e1 --- /dev/null +++ b/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,166 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ +// FIXME cause redundant-decls warnings +extern uint32_t SystemCoreClock; +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 2 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 0 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 2 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<<configPRIO_BITS) - 1) + +/* The highest interrupt priority that can be used by any interrupt service +routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL +INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER +PRIORITY THAN THIS! (higher priorities are lower numeric values. */ +#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 2 + +/* Interrupt priorities used by the kernel port layer itself. These are generic +to all Cortex-M ports, and do not rely on any particular library functions. */ +#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! +See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ +#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +#endif /* __FREERTOS_CONFIG__H */ diff --git a/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.cmake b/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.cmake new file mode 100644 index 000000000..d34a56840 --- /dev/null +++ b/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.cmake @@ -0,0 +1,18 @@ +set(MCU_VARIANT MKL25Z4) + +set(JLINK_DEVICE MKL25Z128xxx4) +set(PYOCD_TARGET mkl25zl128) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../gcc/MKL25Z128xxx4_flash.ld) +set(STARTUP_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../gcc/startup_MKL25Z4.S) + +function(update_board TARGET) + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c + ) + target_compile_definitions(${TARGET} PUBLIC + CPU_MKL25Z128VLK4 + CFG_EXAMPLE_MSC_READONLY + CFG_EXAMPLE_VIDEO_READONLY + ) +endfunction() diff --git a/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.h b/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.h new file mode 100644 index 000000000..23f144666 --- /dev/null +++ b/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.h @@ -0,0 +1,58 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef BOARD_H +#define BOARD_H + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ +// LED +#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 +#define LED_PORT GPIOB +#define LED_PIN_CLOCK kCLOCK_PortB +#define LED_PIN_PORT PORTB +#define LED_PIN 19U +#define LED_PIN_FUNCTION kPORT_MuxAsGpio +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT GPIOC +#define BUTTON_PIN_CLOCK kCLOCK_PortC +#define BUTTON_PIN_PORT PORTC +#define BUTTON_PIN 9U +#define BUTTON_PIN_FUNCTION kPORT_MuxAsGpio +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT UART0 +#define UART_PIN_CLOCK kCLOCK_PortA +#define UART_PIN_PORT PORTA +#define UART_PIN_RX 1u +#define UART_PIN_TX 2u +#define UART_PIN_FUNCTION kPORT_MuxAlt2 +#define SOPT5_UART0RXSRC_UART_RX 0x00u /*!< UART0 receive data source select: UART0_RX pin */ +#define SOPT5_UART0TXSRC_UART_TX 0x00u /*!< UART0 transmit data source select: UART0_TX pin */ + +#endif diff --git a/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.mk b/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.mk index 0d0bceaa4..efd922c5e 100644 --- a/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.mk +++ b/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.mk @@ -8,8 +8,13 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -Wno-error=format -Wno-error=redundant-decls +SRC_C += \ + $(BOARD_PATH)/clock_config.c \ + # All source paths should be relative to the top level. -LD_FILE = $(MCU_DIR)/gcc/MKL25Z128xxx4_flash.ld +LD_FILE = $(FAMILY_PATH)/gcc/MKL25Z128xxx4_flash.ld + +SRC_S += $(FAMILY_PATH)/gcc/startup_$(MCU).S # For flash-jlink target JLINK_DEVICE = MKL25Z128xxx4 diff --git a/hw/bsp/kinetis_kl/boards/frdm_kl25z/clock_config.c b/hw/bsp/kinetis_kl/boards/frdm_kl25z/clock_config.c new file mode 100644 index 000000000..1ba35e0dc --- /dev/null +++ b/hw/bsp/kinetis_kl/boards/frdm_kl25z/clock_config.c @@ -0,0 +1,307 @@ +/* + * Copyright (c) 2015, Freescale Semiconductor, Inc. + * Copyright 2016-2017 NXP + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of the copyright holder nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * How to setup clock using clock driver functions: + * + * 1. CLOCK_SetSimSafeDivs, to make sure core clock, bus clock, flexbus clock + * and flash clock are in allowed range during clock mode switch. + * + * 2. Call CLOCK_Osc0Init to setup OSC clock, if it is used in target mode. + * + * 3. Set MCG configuration, MCG includes three parts: FLL clock, PLL clock and + * internal reference clock(MCGIRCLK). Follow the steps to setup: + * + * 1). Call CLOCK_BootToXxxMode to set MCG to target mode. + * + * 2). If target mode is FBI/BLPI/PBI mode, the MCGIRCLK has been configured + * correctly. For other modes, need to call CLOCK_SetInternalRefClkConfig + * explicitly to setup MCGIRCLK. + * + * 3). Don't need to configure FLL explicitly, because if target mode is FLL + * mode, then FLL has been configured by the function CLOCK_BootToXxxMode, + * if the target mode is not FLL mode, the FLL is disabled. + * + * 4). If target mode is PEE/PBE/PEI/PBI mode, then the related PLL has been + * setup by CLOCK_BootToXxxMode. In FBE/FBI/FEE/FBE mode, the PLL could + * be enabled independently, call CLOCK_EnablePll0 explicitly in this case. + * + * 4. Call CLOCK_SetSimConfig to set the clock configuration in SIM. + */ + +/* TEXT BELOW IS USED AS SETTING FOR THE CLOCKS TOOL ***************************** +!!ClocksProfile +product: Clocks v1.0 +processor: MKL25Z128xxx4 +package_id: MKL25Z128VLK4 +mcu_data: ksdk2_0 +processor_version: 1.1.0 +board: FRDM-KL25Z + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR THE CLOCKS TOOL **/ + +#include "fsl_smc.h" +#include "clock_config.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define MCG_PLL_DISABLE 0U /*!< MCGPLLCLK disabled */ +#define OSC_CAP0P 0U /*!< Oscillator 0pF capacitor load */ +#define OSC_ER_CLK_DISABLE 0U /*!< Disable external reference clock */ +#define SIM_OSC32KSEL_LPO_CLK 3U /*!< OSC32KSEL select: LPO clock */ +#define SIM_PLLFLLSEL_MCGFLLCLK_CLK 0U /*!< PLLFLL select: MCGFLLCLK clock */ +#define SIM_PLLFLLSEL_MCGPLLCLK_CLK 1U /*!< PLLFLL select: MCGPLLCLK clock */ + +/******************************************************************************* + * Variables + ******************************************************************************/ +/* System clock frequency. */ +extern uint32_t SystemCoreClock; + +/******************************************************************************* + * Code +******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockRUN(); +} + +/*FUNCTION********************************************************************** + * + * Function Name : CLOCK_CONFIG_SetFllExtRefDiv + * Description : Configure FLL external reference divider (FRDIV). + * Param frdiv : The value to set FRDIV. + * + *END**************************************************************************/ +static void CLOCK_CONFIG_SetFllExtRefDiv(uint8_t frdiv) +{ + MCG->C1 = ((MCG->C1 & ~MCG_C1_FRDIV_MASK) | MCG_C1_FRDIV(frdiv)); +} + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/* TEXT BELOW IS USED AS SETTING FOR THE CLOCKS TOOL ***************************** +!!Configuration +name: BOARD_BootClockRUN +outputs: +- {id: Bus_clock.outFreq, value: 24 MHz} +- {id: Core_clock.outFreq, value: 48 MHz, locked: true, accuracy: '0.001'} +- {id: ERCLK32K.outFreq, value: 1 kHz} +- {id: Flash_clock.outFreq, value: 24 MHz} +- {id: LPO_clock.outFreq, value: 1 kHz} +- {id: MCGIRCLK.outFreq, value: 32.768 kHz} +- {id: OSCERCLK.outFreq, value: 8 MHz} +- {id: PLLFLLCLK.outFreq, value: 48 MHz} +- {id: System_clock.outFreq, value: 48 MHz} +settings: +- {id: MCGMode, value: PEE} +- {id: MCG.FCRDIV.scale, value: '1', locked: true} +- {id: MCG.FRDIV.scale, value: '32'} +- {id: MCG.IREFS.sel, value: MCG.FRDIV} +- {id: MCG.PLLS.sel, value: MCG.PLL} +- {id: MCG.PRDIV.scale, value: '2', locked: true} +- {id: MCG.VDIV.scale, value: '24', locked: true} +- {id: MCG_C1_IRCLKEN_CFG, value: Enabled} +- {id: MCG_C2_OSC_MODE_CFG, value: ModeOscLowPower} +- {id: MCG_C2_RANGE0_CFG, value: High} +- {id: MCG_C2_RANGE0_FRDIV_CFG, value: High} +- {id: OSC0_CR_ERCLKEN_CFG, value: Enabled} +- {id: OSC_CR_ERCLKEN_CFG, value: Enabled} +- {id: SIM.CLKOUTSEL.sel, value: SIM.OUTDIV4} +- {id: SIM.OSC32KSEL.sel, value: PMC.LPOCLK} +- {id: SIM.OUTDIV1.scale, value: '2'} +- {id: SIM.PLLFLLSEL.sel, value: SIM.MCGPLLCLK_DIV2} +- {id: SIM.TPMSRCSEL.sel, value: SIM.PLLFLLSEL} +- {id: SIM.UART0SRCSEL.sel, value: SIM.PLLFLLSEL} +- {id: SIM.USBSRCSEL.sel, value: SIM.PLLFLLSEL} +sources: +- {id: OSC.OSC.outFreq, value: 8 MHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR THE CLOCKS TOOL **/ + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ +const mcg_config_t mcgConfig_BOARD_BootClockRUN = + { + .mcgMode = kMCG_ModePEE, /* PEE - PLL Engaged External */ + .irclkEnableMode = kMCG_IrclkEnable, /* MCGIRCLK enabled, MCGIRCLK disabled in STOP mode */ + .ircs = kMCG_IrcSlow, /* Slow internal reference clock selected */ + .fcrdiv = 0x0U, /* Fast IRC divider: divided by 1 */ + .frdiv = 0x0U, /* FLL reference clock divider: divided by 32 */ + .drs = kMCG_DrsLow, /* Low frequency range */ + .dmx32 = kMCG_Dmx32Default, /* DCO has a default range of 25% */ + .pll0Config = + { + .enableMode = MCG_PLL_DISABLE, /* MCGPLLCLK disabled */ + .prdiv = 0x1U, /* PLL Reference divider: divided by 2 */ + .vdiv = 0x0U, /* VCO divider: multiplied by 24 */ + }, + }; +const sim_clock_config_t simConfig_BOARD_BootClockRUN = + { + .pllFllSel = SIM_PLLFLLSEL_MCGPLLCLK_CLK, /* PLLFLL select: MCGPLLCLK clock */ + .er32kSrc = SIM_OSC32KSEL_LPO_CLK, /* OSC32KSEL select: LPO clock */ + .clkdiv1 = 0x10010000U, /* SIM_CLKDIV1 - OUTDIV1: /2, OUTDIV4: /2 */ + }; +const osc_config_t oscConfig_BOARD_BootClockRUN = + { + .freq = 8000000U, /* Oscillator frequency: 8000000Hz */ + .capLoad = (OSC_CAP0P), /* Oscillator capacity load: 0pF */ + .workMode = kOSC_ModeOscLowPower, /* Oscillator low power */ + .oscerConfig = + { + .enableMode = kOSC_ErClkEnable, /* Enable external reference clock, disable external reference clock in STOP mode */ + } + }; + +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + /* Set the system clock dividers in SIM to safe value. */ + CLOCK_SetSimSafeDivs(); + /* Initializes OSC0 according to board configuration. */ + CLOCK_InitOsc0(&oscConfig_BOARD_BootClockRUN); + CLOCK_SetXtal0Freq(oscConfig_BOARD_BootClockRUN.freq); + /* Configure FLL external reference divider (FRDIV). */ + CLOCK_CONFIG_SetFllExtRefDiv(mcgConfig_BOARD_BootClockRUN.frdiv); + /* Set MCG to PEE mode. */ + CLOCK_BootToPeeMode(kMCG_OscselOsc, + kMCG_PllClkSelPll0, + &mcgConfig_BOARD_BootClockRUN.pll0Config); + /* Configure the Internal Reference clock (MCGIRCLK). */ + CLOCK_SetInternalRefClkConfig(mcgConfig_BOARD_BootClockRUN.irclkEnableMode, + mcgConfig_BOARD_BootClockRUN.ircs, + mcgConfig_BOARD_BootClockRUN.fcrdiv); + /* Set the clock configuration in SIM module. */ + CLOCK_SetSimConfig(&simConfig_BOARD_BootClockRUN); + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; +} + +/******************************************************************************* + ********************* Configuration BOARD_BootClockVLPR *********************** + ******************************************************************************/ +/* TEXT BELOW IS USED AS SETTING FOR THE CLOCKS TOOL ***************************** +!!Configuration +name: BOARD_BootClockVLPR +outputs: +- {id: Bus_clock.outFreq, value: 800 kHz} +- {id: Core_clock.outFreq, value: 4 MHz} +- {id: ERCLK32K.outFreq, value: 1 kHz} +- {id: Flash_clock.outFreq, value: 800 kHz} +- {id: LPO_clock.outFreq, value: 1 kHz} +- {id: MCGIRCLK.outFreq, value: 4 MHz} +- {id: System_clock.outFreq, value: 4 MHz} +settings: +- {id: MCGMode, value: BLPI} +- {id: powerMode, value: VLPR} +- {id: MCG.CLKS.sel, value: MCG.IRCS} +- {id: MCG.FCRDIV.scale, value: '1', locked: true} +- {id: MCG.FRDIV.scale, value: '32'} +- {id: MCG.IRCS.sel, value: MCG.FCRDIV} +- {id: MCG_C1_IRCLKEN_CFG, value: Enabled} +- {id: MCG_C2_OSC_MODE_CFG, value: ModeOscLowPower} +- {id: MCG_C2_RANGE0_CFG, value: High} +- {id: MCG_C2_RANGE0_FRDIV_CFG, value: High} +- {id: SIM.OSC32KSEL.sel, value: PMC.LPOCLK} +- {id: SIM.OUTDIV4.scale, value: '5'} +sources: +- {id: OSC.OSC.outFreq, value: 8 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR THE CLOCKS TOOL **/ + +/******************************************************************************* + * Variables for BOARD_BootClockVLPR configuration + ******************************************************************************/ +const mcg_config_t mcgConfig_BOARD_BootClockVLPR = + { + .mcgMode = kMCG_ModeBLPI, /* BLPI - Bypassed Low Power Internal */ + .irclkEnableMode = kMCG_IrclkEnable, /* MCGIRCLK enabled, MCGIRCLK disabled in STOP mode */ + .ircs = kMCG_IrcFast, /* Fast internal reference clock selected */ + .fcrdiv = 0x0U, /* Fast IRC divider: divided by 1 */ + .frdiv = 0x0U, /* FLL reference clock divider: divided by 32 */ + .drs = kMCG_DrsLow, /* Low frequency range */ + .dmx32 = kMCG_Dmx32Default, /* DCO has a default range of 25% */ + .pll0Config = + { + .enableMode = MCG_PLL_DISABLE, /* MCGPLLCLK disabled */ + .prdiv = 0x0U, /* PLL Reference divider: divided by 1 */ + .vdiv = 0x0U, /* VCO divider: multiplied by 24 */ + }, + }; +const sim_clock_config_t simConfig_BOARD_BootClockVLPR = + { + .pllFllSel = SIM_PLLFLLSEL_MCGFLLCLK_CLK, /* PLLFLL select: MCGFLLCLK clock */ + .er32kSrc = SIM_OSC32KSEL_LPO_CLK, /* OSC32KSEL select: LPO clock */ + .clkdiv1 = 0x40000U, /* SIM_CLKDIV1 - OUTDIV1: /1, OUTDIV4: /5 */ + }; +const osc_config_t oscConfig_BOARD_BootClockVLPR = + { + .freq = 0U, /* Oscillator frequency: 0Hz */ + .capLoad = (OSC_CAP0P), /* Oscillator capacity load: 0pF */ + .workMode = kOSC_ModeOscLowPower, /* Oscillator low power */ + .oscerConfig = + { + .enableMode = OSC_ER_CLK_DISABLE, /* Disable external reference clock */ + } + }; + +/******************************************************************************* + * Code for BOARD_BootClockVLPR configuration + ******************************************************************************/ +void BOARD_BootClockVLPR(void) +{ + /* Set the system clock dividers in SIM to safe value. */ + CLOCK_SetSimSafeDivs(); + /* Set MCG to BLPI mode. */ + CLOCK_BootToBlpiMode(mcgConfig_BOARD_BootClockVLPR.fcrdiv, + mcgConfig_BOARD_BootClockVLPR.ircs, + mcgConfig_BOARD_BootClockVLPR.irclkEnableMode); + /* Set the clock configuration in SIM module. */ + CLOCK_SetSimConfig(&simConfig_BOARD_BootClockVLPR); + /* Set VLPR power mode. */ + SMC_SetPowerModeProtection(SMC, kSMC_AllowPowerModeAll); +#if (defined(FSL_FEATURE_SMC_HAS_LPWUI) && FSL_FEATURE_SMC_HAS_LPWUI) + SMC_SetPowerModeVlpr(SMC, false); +#else + SMC_SetPowerModeVlpr(SMC); +#endif + while (SMC_GetPowerModeState(SMC) != kSMC_PowerStateVlpr) + { + } + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKVLPR_CORE_CLOCK; +} diff --git a/hw/bsp/kinetis_kl/boards/frdm_kl25z/clock_config.h b/hw/bsp/kinetis_kl/boards/frdm_kl25z/clock_config.h new file mode 100644 index 000000000..1033d4e55 --- /dev/null +++ b/hw/bsp/kinetis_kl/boards/frdm_kl25z/clock_config.h @@ -0,0 +1,130 @@ +/* + * Copyright (c) 2015, Freescale Semiconductor, Inc. + * Copyright 2016-2017 NXP + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of the copyright holder nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions +******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#define BOARD_XTAL0_CLK_HZ 8000000U /*!< Board xtal0 frequency in Hz */ + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockRUN configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 48000000U /*!< Core clock frequency: 48000000Hz */ + +/*! @brief MCG set for BOARD_BootClockRUN configuration. + */ +extern const mcg_config_t mcgConfig_BOARD_BootClockRUN; +/*! @brief SIM module set for BOARD_BootClockRUN configuration. + */ +extern const sim_clock_config_t simConfig_BOARD_BootClockRUN; +/*! @brief OSC set for BOARD_BootClockRUN configuration. + */ +extern const osc_config_t oscConfig_BOARD_BootClockRUN; + +/******************************************************************************* + * API for BOARD_BootClockRUN configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockRUN(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ********************* Configuration BOARD_BootClockVLPR *********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockVLPR configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKVLPR_CORE_CLOCK 4000000U /*!< Core clock frequency: 4000000Hz */ + +/*! @brief MCG set for BOARD_BootClockVLPR configuration. + */ +extern const mcg_config_t mcgConfig_BOARD_BootClockVLPR; +/*! @brief SIM module set for BOARD_BootClockVLPR configuration. + */ +extern const sim_clock_config_t simConfig_BOARD_BootClockVLPR; +/*! @brief OSC set for BOARD_BootClockVLPR configuration. + */ +extern const osc_config_t oscConfig_BOARD_BootClockVLPR; + +/******************************************************************************* + * API for BOARD_BootClockVLPR configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockVLPR(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/kinetis_kl/boards/frdm_kl25z/frdm_kl25z.c b/hw/bsp/kinetis_kl/family.c index 46f85f6a5..8914078d5 100644 --- a/hw/bsp/kinetis_kl/boards/frdm_kl25z/frdm_kl25z.c +++ b/hw/bsp/kinetis_kl/family.c @@ -21,11 +21,10 @@ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. */ -#include "../board.h" +#include "bsp/board.h" +#include "board.h" #include "fsl_device_registers.h" #include "fsl_gpio.h" #include "fsl_port.h" @@ -47,38 +46,6 @@ void USB0_IRQHandler(void) #endif } -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -// LED -#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 -#define LED_PORT GPIOB -#define LED_PIN_CLOCK kCLOCK_PortB -#define LED_PIN_PORT PORTB -#define LED_PIN 19U -#define LED_PIN_FUNCTION kPORT_MuxAsGpio -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN_CLOCK kCLOCK_PortC -#define BUTTON_PIN_PORT PORTC -#define BUTTON_PIN 9U -#define BUTTON_PIN_FUNCTION kPORT_MuxAsGpio -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_PORT UART0 -#define UART_PIN_CLOCK kCLOCK_PortA -#define UART_PIN_PORT PORTA -#define UART_PIN_RX 1u -#define UART_PIN_TX 2u -#define UART_PIN_FUNCTION kPORT_MuxAlt2 -#define SOPT5_UART0RXSRC_UART_RX 0x00u /*!< UART0 receive data source select: UART0_RX pin */ -#define SOPT5_UART0TXSRC_UART_TX 0x00u /*!< UART0 transmit data source select: UART0_TX pin */ - -const uint8_t dcd_data[] = { 0x00 }; - void board_init(void) { BOARD_BootClockRUN(); @@ -139,13 +106,13 @@ void board_init(void) void board_led_write(bool state) { - GPIO_WritePinOutput(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); + GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); } uint32_t board_button_read(void) { #if defined(BUTTON_PORT) && defined(BUTTON_PIN) - return BUTTON_STATE_ACTIVE == GPIO_ReadPinInput(BUTTON_PORT, BUTTON_PIN); + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN); #endif return 0; } diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake new file mode 100644 index 000000000..77b932b8e --- /dev/null +++ b/hw/bsp/kinetis_kl/family.cmake @@ -0,0 +1,126 @@ +include_guard() + +if (NOT BOARD) + message(FATAL_ERROR "BOARD not specified") +endif () + +set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) +set(CMSIS_DIR ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS KINETIS_KL CACHE INTERNAL "") + +# enable LTO if supported +include(CheckIPOSupported) +check_ipo_supported(RESULT IPO_SUPPORTED) +if (IPO_SUPPORTED) + set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) +endif () + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/drivers/gpio/fsl_gpio.c + ${SDK_DIR}/drivers/lpsci/fsl_lpsci.c + ${SDK_DIR}/drivers/uart/fsl_uart.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c + ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ${SDK_DIR}/drivers/common + ${SDK_DIR}/drivers/gpio + ${SDK_DIR}/drivers/lpsci + ${SDK_DIR}/drivers/port + ${SDK_DIR}/drivers/smc + ${SDK_DIR}/drivers/uart + ) + + update_board(${BOARD_TARGET}) + + # LD_FILE and STARTUP_FILE can be defined in board.cmake + + target_sources(${BOARD_TARGET} PUBLIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + # nanolib + --specs=nosys.specs + --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET) + family_configure_common(${TARGET}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # TinyUSB Port + ${TOP}/src/portable/nxp/khci/dcd_khci.c + ${TOP}/src/portable/nxp/khci/hcd_khci.c + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB + family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_KL) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_jlink(${TARGET}) + #family_flash_nxplink(${TARGET}) +endfunction() + + +function(family_configure_device_example TARGET) + family_configure_example(${TARGET}) +endfunction() + +function(family_configure_host_example TARGET) + family_configure_example(${TARGET}) +endfunction() + +function(family_configure_dual_usb_example TARGET) + family_configure_example(${TARGET}) +endfunction() diff --git a/hw/bsp/kinetis_kl/family.mk b/hw/bsp/kinetis_kl/family.mk index e805d6dae..2bed6b486 100644 --- a/hw/bsp/kinetis_kl/family.mk +++ b/hw/bsp/kinetis_kl/family.mk @@ -1,5 +1,5 @@ -SDK_DIR = hw/mcu/nxp/nxp_sdk -DEPS_SUBMODULES += $(SDK_DIR) +SDK_DIR = hw/mcu/nxp/mcux-sdk +DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5 MCU_DIR = $(SDK_DIR)/devices/$(MCU) include $(TOP)/$(BOARD_PATH)/board.mk @@ -18,20 +18,22 @@ SRC_C += \ src/portable/nxp/khci/dcd_khci.c \ src/portable/nxp/khci/hcd_khci.c \ $(MCU_DIR)/system_$(MCU).c \ - $(MCU_DIR)/project_template/clock_config.c \ $(MCU_DIR)/drivers/fsl_clock.c \ - $(MCU_DIR)/drivers/fsl_gpio.c \ - $(MCU_DIR)/drivers/fsl_lpsci.c \ - $(MCU_DIR)/drivers/fsl_uart.c + $(SDK_DIR)/drivers/gpio/fsl_gpio.c \ + $(SDK_DIR)/drivers/lpsci/fsl_lpsci.c \ + $(SDK_DIR)/drivers/uart/fsl_uart.c \ INC += \ $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(SDK_DIR)/CMSIS/Include \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/project_template \ - $(TOP)/$(MCU_DIR)/drivers - -SRC_S += $(MCU_DIR)/gcc/startup_$(MCU).S + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(SDK_DIR)/drivers/common \ + $(TOP)/$(SDK_DIR)/drivers/gpio \ + $(TOP)/$(SDK_DIR)/drivers/lpsci \ + $(TOP)/$(SDK_DIR)/drivers/port \ + $(TOP)/$(SDK_DIR)/drivers/smc \ + $(TOP)/$(SDK_DIR)/drivers/uart \ # For freeRTOS port source FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 diff --git a/hw/bsp/kinetis_kl/gcc/MKL25Z128xxx4_flash.ld b/hw/bsp/kinetis_kl/gcc/MKL25Z128xxx4_flash.ld new file mode 100644 index 000000000..b38aa827c --- /dev/null +++ b/hw/bsp/kinetis_kl/gcc/MKL25Z128xxx4_flash.ld @@ -0,0 +1,253 @@ +/* +** ################################################################### +** Processors: MKL25Z128VFM4 +** MKL25Z128VFT4 +** MKL25Z128VLH4 +** MKL25Z128VLK4 +** +** Compiler: GNU C Compiler +** Reference manual: KL25P80M48SF0RM, Rev.3, Sep 2012 +** Version: rev. 2.5, 2015-02-19 +** Build: b170214 +** +** Abstract: +** Linker file for the GNU C Compiler +** +** Copyright 2016 Freescale Semiconductor, Inc. +** Copyright 2016-2017 NXP +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of the copyright holder nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.nxp.com +** mail: [email protected] +** +** ################################################################### +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +HEAP_SIZE = DEFINED(__heap_size__) ? __heap_size__ : 0x0400; +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0400; +M_VECTOR_RAM_SIZE = DEFINED(__ram_vector_table__) ? 0x0200 : 0x0; + +/* Specify the memory areas */ +MEMORY +{ + m_interrupts (RX) : ORIGIN = 0x00000000, LENGTH = 0x00000200 + m_flash_config (RX) : ORIGIN = 0x00000400, LENGTH = 0x00000010 + m_text (RX) : ORIGIN = 0x00000410, LENGTH = 0x0001FBF0 + m_data (RW) : ORIGIN = 0x1FFFF000, LENGTH = 0x00004000 +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into internal flash */ + .interrupts : + { + __VECTOR_TABLE = .; + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } > m_interrupts + + .flash_config : + { + . = ALIGN(4); + KEEP(*(.FlashConfig)) /* Flash Configuration Field (FCF) */ + . = ALIGN(4); + } > m_flash_config + + /* The program code and other data goes into internal flash */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + KEEP (*(.init)) + KEEP (*(.fini)) + . = ALIGN(4); + } > m_text + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > m_text + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } > m_text + + .ctors : + { + __CTOR_LIST__ = .; + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*crtbegin?.o(.ctors)) + /* We don't want to include the .ctor section from + from the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + __CTOR_END__ = .; + } > m_text + + .dtors : + { + __DTOR_LIST__ = .; + KEEP (*crtbegin.o(.dtors)) + KEEP (*crtbegin?.o(.dtors)) + KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + __DTOR_END__ = .; + } > m_text + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } > m_text + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } > m_text + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } > m_text + + __etext = .; /* define a global symbol at end of code */ + __DATA_ROM = .; /* Symbol is used by startup for data initialization */ + + /* reserve MTB memory at the beginning of m_data */ + .mtb : /* MTB buffer address as defined by the hardware */ + { + . = ALIGN(8); + _mtb_start = .; + KEEP(*(.mtb_buf)) /* need to KEEP Micro Trace Buffer as not referenced by application */ + . = ALIGN(8); + _mtb_end = .; + } > m_data + + .interrupts_ram : + { + . = ALIGN(4); + __VECTOR_RAM__ = .; + __interrupts_ram_start__ = .; /* Create a global symbol at data start */ + *(.m_interrupts_ram) /* This is a user defined section */ + . += M_VECTOR_RAM_SIZE; + . = ALIGN(4); + __interrupts_ram_end__ = .; /* Define a global symbol at data end */ + } > m_data + + __VECTOR_RAM = DEFINED(__ram_vector_table__) ? __VECTOR_RAM__ : ORIGIN(m_interrupts); + __RAM_VECTOR_TABLE_SIZE_BYTES = DEFINED(__ram_vector_table__) ? (__interrupts_ram_end__ - __interrupts_ram_start__) : 0x0; + + .data : AT(__DATA_ROM) + { + . = ALIGN(4); + __DATA_RAM = .; + __data_start__ = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + KEEP(*(.jcr*)) + . = ALIGN(4); + __data_end__ = .; /* define a global symbol at data end */ + } > m_data + + __DATA_END = __DATA_ROM + (__data_end__ - __data_start__); + text_end = ORIGIN(m_text) + LENGTH(m_text); + ASSERT(__DATA_END <= text_end, "region m_text overflowed with text and data") + + /* Uninitialized data section */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + . = ALIGN(4); + __START_BSS = .; + __bss_start__ = .; + *(.bss) + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + __END_BSS = .; + } > m_data + + .heap : + { + . = ALIGN(8); + __end__ = .; + PROVIDE(end = .); + __HeapBase = .; + . += HEAP_SIZE; + __HeapLimit = .; + __heap_limit = .; /* Add for _sbrk */ + } > m_data + + .stack : + { + . = ALIGN(8); + . += STACK_SIZE; + } > m_data + + /* Initializes stack on the end of block */ + __StackTop = ORIGIN(m_data) + LENGTH(m_data); + __StackLimit = __StackTop - STACK_SIZE; + PROVIDE(__stack = __StackTop); + + .ARM.attributes 0 : { *(.ARM.attributes) } + + ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap") +} diff --git a/hw/bsp/kinetis_kl/gcc/startup_MKL25Z4.S b/hw/bsp/kinetis_kl/gcc/startup_MKL25Z4.S new file mode 100644 index 000000000..dc1438f3a --- /dev/null +++ b/hw/bsp/kinetis_kl/gcc/startup_MKL25Z4.S @@ -0,0 +1,383 @@ +/* ---------------------------------------------------------------------------------------*/ +/* @file: startup_MKL25Z4.s */ +/* @purpose: CMSIS Cortex-M0P Core Device Startup File */ +/* MKL25Z4 */ +/* @version: 2.5 */ +/* @date: 2015-2-19 */ +/* @build: b170112 */ +/* ---------------------------------------------------------------------------------------*/ +/* */ +/* Copyright (c) 1997 - 2016, Freescale Semiconductor, Inc. */ +/* Copyright 2016 - 2017 NXP */ +/* Redistribution and use in source and binary forms, with or without modification, */ +/* are permitted provided that the following conditions are met: */ +/* */ +/* o Redistributions of source code must retain the above copyright notice, this list */ +/* of conditions and the following disclaimer. */ +/* */ +/* o Redistributions in binary form must reproduce the above copyright notice, this */ +/* list of conditions and the following disclaimer in the documentation and/or */ +/* other materials provided with the distribution. */ +/* */ +/* o Neither the name of the copyright holder nor the names of its */ +/* contributors may be used to endorse or promote products derived from this */ +/* software without specific prior written permission. */ +/* */ +/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND */ +/* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED */ +/* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE */ +/* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR */ +/* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES */ +/* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; */ +/* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON */ +/* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT */ +/* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS */ +/* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +/*****************************************************************************/ +/* Version: GCC for ARM Embedded Processors */ +/*****************************************************************************/ + .syntax unified + .arch armv6-m + + .section .isr_vector, "a" + .align 2 + .globl __isr_vector +__isr_vector: + .long __StackTop /* Top of Stack */ + .long Reset_Handler /* Reset Handler */ + .long NMI_Handler /* NMI Handler*/ + .long HardFault_Handler /* Hard Fault Handler*/ + .long 0 /* Reserved*/ + .long 0 /* Reserved*/ + .long 0 /* Reserved*/ + .long 0 /* Reserved*/ + .long 0 /* Reserved*/ + .long 0 /* Reserved*/ + .long 0 /* Reserved*/ + .long SVC_Handler /* SVCall Handler*/ + .long 0 /* Reserved*/ + .long 0 /* Reserved*/ + .long PendSV_Handler /* PendSV Handler*/ + .long SysTick_Handler /* SysTick Handler*/ + + /* External Interrupts*/ + .long DMA0_IRQHandler /* DMA channel 0 transfer complete*/ + .long DMA1_IRQHandler /* DMA channel 1 transfer complete*/ + .long DMA2_IRQHandler /* DMA channel 2 transfer complete*/ + .long DMA3_IRQHandler /* DMA channel 3 transfer complete*/ + .long Reserved20_IRQHandler /* Reserved interrupt*/ + .long FTFA_IRQHandler /* Command complete and read collision*/ + .long LVD_LVW_IRQHandler /* Low-voltage detect, low-voltage warning*/ + .long LLWU_IRQHandler /* Low leakage wakeup Unit*/ + .long I2C0_IRQHandler /* I2C0 interrupt*/ + .long I2C1_IRQHandler /* I2C1 interrupt*/ + .long SPI0_IRQHandler /* SPI0 single interrupt vector for all sources*/ + .long SPI1_IRQHandler /* SPI1 single interrupt vector for all sources*/ + .long UART0_IRQHandler /* UART0 status and error*/ + .long UART1_IRQHandler /* UART1 status and error*/ + .long UART2_IRQHandler /* UART2 status and error*/ + .long ADC0_IRQHandler /* ADC0 interrupt*/ + .long CMP0_IRQHandler /* CMP0 interrupt*/ + .long TPM0_IRQHandler /* TPM0 single interrupt vector for all sources*/ + .long TPM1_IRQHandler /* TPM1 single interrupt vector for all sources*/ + .long TPM2_IRQHandler /* TPM2 single interrupt vector for all sources*/ + .long RTC_IRQHandler /* RTC alarm*/ + .long RTC_Seconds_IRQHandler /* RTC seconds*/ + .long PIT_IRQHandler /* PIT interrupt*/ + .long Reserved39_IRQHandler /* Reserved interrupt*/ + .long USB0_IRQHandler /* USB0 interrupt*/ + .long DAC0_IRQHandler /* DAC0 interrupt*/ + .long TSI0_IRQHandler /* TSI0 interrupt*/ + .long MCG_IRQHandler /* MCG interrupt*/ + .long LPTMR0_IRQHandler /* LPTMR0 interrupt*/ + .long Reserved45_IRQHandler /* Reserved interrupt*/ + .long PORTA_IRQHandler /* PORTA Pin detect*/ + .long PORTD_IRQHandler /* PORTD Pin detect*/ + + .size __isr_vector, . - __isr_vector + +/* Flash Configuration */ + .section .FlashConfig, "a" + .long 0xFFFFFFFF + .long 0xFFFFFFFF + .long 0xFFFFFFFF + .long 0xFFFFFFFE + + .text + .thumb + +/* Reset Handler */ + + .thumb_func + .align 2 + .globl Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + cpsid i /* Mask interrupts */ + .equ VTOR, 0xE000ED08 + ldr r0, =VTOR + ldr r1, =__isr_vector + str r1, [r0] + ldr r2, [r1] + msr msp, r2 +#ifndef __NO_SYSTEM_INIT + ldr r0,=SystemInit + blx r0 +#endif +/* Loop to copy data from read only memory to RAM. The ranges + * of copy from/to are specified by following symbols evaluated in + * linker script. + * __etext: End of code section, i.e., begin of data sections to copy from. + * __data_start__/__data_end__: RAM address range that data should be + * copied to. Both must be aligned to 4 bytes boundary. */ + + ldr r1, =__etext + ldr r2, =__data_start__ + ldr r3, =__data_end__ + + subs r3, r2 + ble .LC0 + +.LC1: + subs r3, 4 + ldr r0, [r1,r3] + str r0, [r2,r3] + bgt .LC1 +.LC0: + +#ifdef __STARTUP_CLEAR_BSS +/* This part of work usually is done in C library startup code. Otherwise, + * define this macro to enable it in this startup. + * + * Loop to zero out BSS section, which uses following symbols + * in linker script: + * __bss_start__: start of BSS section. Must align to 4 + * __bss_end__: end of BSS section. Must align to 4 + */ + ldr r1, =__bss_start__ + ldr r2, =__bss_end__ + + subs r2, r1 + ble .LC3 + + movs r0, 0 +.LC2: + str r0, [r1, r2] + subs r2, 4 + bge .LC2 +.LC3: +#endif + cpsie i /* Unmask interrupts */ +#ifndef __START +#define __START _start +#endif +#ifndef __ATOLLIC__ + ldr r0,=__START + blx r0 +#else + ldr r0,=__libc_init_array + blx r0 + ldr r0,=main + bx r0 +#endif + .pool + .size Reset_Handler, . - Reset_Handler + + .align 1 + .thumb_func + .weak DefaultISR + .type DefaultISR, %function +DefaultISR: + ldr r0, =DefaultISR + bx r0 + .size DefaultISR, . - DefaultISR + + .align 1 + .thumb_func + .weak NMI_Handler + .type NMI_Handler, %function +NMI_Handler: + ldr r0,=NMI_Handler + bx r0 + .size NMI_Handler, . - NMI_Handler + + .align 1 + .thumb_func + .weak HardFault_Handler + .type HardFault_Handler, %function +HardFault_Handler: + ldr r0,=HardFault_Handler + bx r0 + .size HardFault_Handler, . - HardFault_Handler + + .align 1 + .thumb_func + .weak SVC_Handler + .type SVC_Handler, %function +SVC_Handler: + ldr r0,=SVC_Handler + bx r0 + .size SVC_Handler, . - SVC_Handler + + .align 1 + .thumb_func + .weak PendSV_Handler + .type PendSV_Handler, %function +PendSV_Handler: + ldr r0,=PendSV_Handler + bx r0 + .size PendSV_Handler, . - PendSV_Handler + + .align 1 + .thumb_func + .weak SysTick_Handler + .type SysTick_Handler, %function +SysTick_Handler: + ldr r0,=SysTick_Handler + bx r0 + .size SysTick_Handler, . - SysTick_Handler + + .align 1 + .thumb_func + .weak DMA0_IRQHandler + .type DMA0_IRQHandler, %function +DMA0_IRQHandler: + ldr r0,=DMA0_DriverIRQHandler + bx r0 + .size DMA0_IRQHandler, . - DMA0_IRQHandler + + .align 1 + .thumb_func + .weak DMA1_IRQHandler + .type DMA1_IRQHandler, %function +DMA1_IRQHandler: + ldr r0,=DMA1_DriverIRQHandler + bx r0 + .size DMA1_IRQHandler, . - DMA1_IRQHandler + + .align 1 + .thumb_func + .weak DMA2_IRQHandler + .type DMA2_IRQHandler, %function +DMA2_IRQHandler: + ldr r0,=DMA2_DriverIRQHandler + bx r0 + .size DMA2_IRQHandler, . - DMA2_IRQHandler + + .align 1 + .thumb_func + .weak DMA3_IRQHandler + .type DMA3_IRQHandler, %function +DMA3_IRQHandler: + ldr r0,=DMA3_DriverIRQHandler + bx r0 + .size DMA3_IRQHandler, . - DMA3_IRQHandler + + .align 1 + .thumb_func + .weak I2C0_IRQHandler + .type I2C0_IRQHandler, %function +I2C0_IRQHandler: + ldr r0,=I2C0_DriverIRQHandler + bx r0 + .size I2C0_IRQHandler, . - I2C0_IRQHandler + + .align 1 + .thumb_func + .weak I2C1_IRQHandler + .type I2C1_IRQHandler, %function +I2C1_IRQHandler: + ldr r0,=I2C1_DriverIRQHandler + bx r0 + .size I2C1_IRQHandler, . - I2C1_IRQHandler + + .align 1 + .thumb_func + .weak SPI0_IRQHandler + .type SPI0_IRQHandler, %function +SPI0_IRQHandler: + ldr r0,=SPI0_DriverIRQHandler + bx r0 + .size SPI0_IRQHandler, . - SPI0_IRQHandler + + .align 1 + .thumb_func + .weak SPI1_IRQHandler + .type SPI1_IRQHandler, %function +SPI1_IRQHandler: + ldr r0,=SPI1_DriverIRQHandler + bx r0 + .size SPI1_IRQHandler, . - SPI1_IRQHandler + + .align 1 + .thumb_func + .weak UART0_IRQHandler + .type UART0_IRQHandler, %function +UART0_IRQHandler: + ldr r0,=UART0_DriverIRQHandler + bx r0 + .size UART0_IRQHandler, . - UART0_IRQHandler + + .align 1 + .thumb_func + .weak UART1_IRQHandler + .type UART1_IRQHandler, %function +UART1_IRQHandler: + ldr r0,=UART1_DriverIRQHandler + bx r0 + .size UART1_IRQHandler, . - UART1_IRQHandler + + .align 1 + .thumb_func + .weak UART2_IRQHandler + .type UART2_IRQHandler, %function +UART2_IRQHandler: + ldr r0,=UART2_DriverIRQHandler + bx r0 + .size UART2_IRQHandler, . - UART2_IRQHandler + + +/* Macro to define default handlers. Default handler + * will be weak symbol and just dead loops. They can be + * overwritten by other handlers */ + .macro def_irq_handler handler_name + .weak \handler_name + .set \handler_name, DefaultISR + .endm + +/* Exception Handlers */ + def_irq_handler DMA0_DriverIRQHandler + def_irq_handler DMA1_DriverIRQHandler + def_irq_handler DMA2_DriverIRQHandler + def_irq_handler DMA3_DriverIRQHandler + def_irq_handler Reserved20_IRQHandler + def_irq_handler FTFA_IRQHandler + def_irq_handler LVD_LVW_IRQHandler + def_irq_handler LLWU_IRQHandler + def_irq_handler I2C0_DriverIRQHandler + def_irq_handler I2C1_DriverIRQHandler + def_irq_handler SPI0_DriverIRQHandler + def_irq_handler SPI1_DriverIRQHandler + def_irq_handler UART0_DriverIRQHandler + def_irq_handler UART1_DriverIRQHandler + def_irq_handler UART2_DriverIRQHandler + def_irq_handler ADC0_IRQHandler + def_irq_handler CMP0_IRQHandler + def_irq_handler TPM0_IRQHandler + def_irq_handler TPM1_IRQHandler + def_irq_handler TPM2_IRQHandler + def_irq_handler RTC_IRQHandler + def_irq_handler RTC_Seconds_IRQHandler + def_irq_handler PIT_IRQHandler + def_irq_handler Reserved39_IRQHandler + def_irq_handler USB0_IRQHandler + def_irq_handler DAC0_IRQHandler + def_irq_handler TSI0_IRQHandler + def_irq_handler MCG_IRQHandler + def_irq_handler LPTMR0_IRQHandler + def_irq_handler Reserved45_IRQHandler + def_irq_handler PORTA_IRQHandler + def_irq_handler PORTD_IRQHandler + + .end diff --git a/tools/get_deps.py b/tools/get_deps.py index b4739e940..7e798cf9e 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -53,9 +53,6 @@ deps_optional = { 'hw/mcu/nxp/mcux-sdk': ['https://github.com/hathach/mcux-sdk.git', '950819b7de9b32f92c3edf396bc5ffb8d66e7009', 'kinetis_k32l lpc51 lpc54 lpc55 mcx imxrt'], - 'hw/mcu/nxp/nxp_sdk': ['https://github.com/hathach/nxp_sdk.git', - '845c8fc49b6fb660f06a5c45225494eacb06f00c', - 'kinetis_kl'], 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/sekigon-gonnoc/Pico-PIO-USB.git', 'c3715ce94b6f6391856de56081d4d9b3e98fa93d', 'rp2040'], diff --git a/tools/get_family_deps.py b/tools/get_family_deps.py deleted file mode 100644 index 071d7b756..000000000 --- a/tools/get_family_deps.py +++ /dev/null @@ -1,21 +0,0 @@ -import sys -import subprocess -import os - -# TOP is tinyusb root dir -TOP = os.path.dirname(os.path.dirname(os.path.abspath(__file__))) - -def get_family_dep(family): - for entry in os.scandir("{}/hw/bsp/{}/boards".format(TOP, family)): - if entry.is_dir(): - result = subprocess.run("make -C {}/examples/device/board_test BOARD={} get-deps".format(TOP, entry.name), - shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - print(result.stdout.decode("utf-8")) - return result.returncode - - -status = 0 -for d in sys.argv[1:]: - status += get_family_dep(d) - -sys.exit(status) |