diff options
45 files changed, 311 insertions, 280 deletions
diff --git a/.circleci/config.yml b/.circleci/config.yml index fd5631e2e..0b11b50e4 100644 --- a/.circleci/config.yml +++ b/.circleci/config.yml @@ -20,12 +20,12 @@ jobs: BUILDSYSTEM_TOOLCHAIN=( "cmake arm-clang" + "cmake esp-idf" "make aarch64-gcc" "make arm-gcc" "make msp430-gcc" "make riscv-gcc" "make rx-gcc" - "cmake esp-idf" ) # only build IAR if not forked PR, since IAR token is not shared diff --git a/.circleci/config2.yml b/.circleci/config2.yml index 3b0294168..d86a3f662 100644 --- a/.circleci/config2.yml +++ b/.circleci/config2.yml @@ -10,17 +10,7 @@ commands: - run: name: Set toolchain url and key command: | - TOOLCHAIN_JSON='{ - "aarch64-gcc": "https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz", - "arm-clang": "https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-19.1.1/LLVM-ET-Arm-19.1.1-Linux-x86_64.tar.xz", - "arm-gcc": "https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v13.2.1-1.1/xpack-arm-none-eabi-gcc-13.2.1-1.1-linux-x64.tar.gz", - "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", - "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz", - "rx-gcc": "https://github.com/hathach/rx_device/releases/download/0.0.1/gcc-8.3.0.202411-GNURX-ELF.run", - "arm-iar": "https://updates.iar.com/FileStore/STANDARD/001/003/322/cxarm-9.60.3.deb" - }' - toolchain_url=$(echo $TOOLCHAIN_JSON | jq -r '.["<< parameters.toolchain >>"]') - + toolchain_url=$(jq -r '."<< parameters.toolchain >>"' .github/actions/setup_toolchain/toolchain.json) # only cache if not a github link if [[ $toolchain_url != "https://github.com"* ]]; then echo "<< parameters.toolchain >>-$toolchain_url" > toolchain_key @@ -121,7 +111,6 @@ commands: TOOLCHAIN_OPTION="--toolchain clang" elif [ << parameters.toolchain >> == arm-iar ]; then TOOLCHAIN_OPTION="--toolchain iar" - echo IAR_LMS_CLOUD_URL=$IAR_LMS_CLOUD_URL iccarm --version elif [ << parameters.toolchain >> == arm-gcc ]; then TOOLCHAIN_OPTION="--toolchain gcc" diff --git a/.github/actions/setup_toolchain/action.yml b/.github/actions/setup_toolchain/action.yml index 8305daa24..850a3a06f 100644 --- a/.github/actions/setup_toolchain/action.yml +++ b/.github/actions/setup_toolchain/action.yml @@ -28,18 +28,10 @@ runs: - name: Get Toolchain URL if: >- inputs.toolchain != 'arm-gcc' && - inputs.toolchain != 'arm-iar' && inputs.toolchain != 'esp-idf' id: set-toolchain-url run: | - TOOLCHAIN_JSON='{ - "aarch64-gcc": "https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz", - "arm-clang": "https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-19.1.1/LLVM-ET-Arm-19.1.1-Linux-x86_64.tar.xz", - "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", - "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz", - "rx-gcc": "https://github.com/hathach/rx_device/releases/download/0.0.1/gcc-8.3.0.202411-GNURX-ELF.run" - }' - TOOLCHAIN_URL=$(echo $TOOLCHAIN_JSON | jq -r '.["${{ inputs.toolchain }}"]') + TOOLCHAIN_URL=$(jq -r '."${{ inputs.toolchain }}"' .github/actions/setup_toolchain/toolchain.json) echo "toolchain_url=$TOOLCHAIN_URL" echo "toolchain_url=$TOOLCHAIN_URL" >> $GITHUB_OUTPUT shell: bash @@ -47,7 +39,6 @@ runs: - name: Download Toolchain if: >- inputs.toolchain != 'arm-gcc' && - inputs.toolchain != 'arm-iar' && inputs.toolchain != 'esp-idf' uses: ./.github/actions/setup_toolchain/download with: diff --git a/.github/actions/setup_toolchain/download/action.yml b/.github/actions/setup_toolchain/download/action.yml index 813197208..ce9643010 100644 --- a/.github/actions/setup_toolchain/download/action.yml +++ b/.github/actions/setup_toolchain/download/action.yml @@ -23,17 +23,25 @@ runs: if: steps.cache-toolchain-download.outputs.cache-hit != 'true' run: | mkdir -p ~/cache/${{ inputs.toolchain }} - wget --progress=dot:giga ${{ inputs.toolchain_url }} -O toolchain.tar.gz + if [[ ${{ inputs.toolchain }} == rx-gcc ]]; then - mv toolchain.tar.gz toolchain.run + wget --progress=dot:giga ${{ inputs.toolchain_url }} -O toolchain.run chmod +x toolchain.run ./toolchain.run -p ~/cache/${{ inputs.toolchain }}/gnurx -y + elif [[ ${{ inputs.toolchain }} == arm-iar ]]; then + wget --progress=dot:giga ${{ inputs.toolchain_url }} -O ~/cache/${{ inputs.toolchain }}/cxarm.deb else + wget --progress=dot:giga ${{ inputs.toolchain_url }} -O toolchain.tar.gz tar -C ~/cache/${{ inputs.toolchain }} -xaf toolchain.tar.gz fi shell: bash - - name: Set Toolchain Path + - name: Setup Toolchain run: | - echo >> $GITHUB_PATH `echo ~/cache/${{ inputs.toolchain }}/*/bin` + if [[ ${{ inputs.toolchain }} == arm-iar ]]; then + sudo apt-get install -y ~/cache/${{ inputs.toolchain }}/cxarm.deb + echo >> $GITHUB_PATH "/opt/iar/cxarm/arm/bin" + else + echo >> $GITHUB_PATH `echo ~/cache/${{ inputs.toolchain }}/*/bin` + fi shell: bash diff --git a/.github/actions/setup_toolchain/toolchain.json b/.github/actions/setup_toolchain/toolchain.json new file mode 100644 index 000000000..4e65f1cbe --- /dev/null +++ b/.github/actions/setup_toolchain/toolchain.json @@ -0,0 +1,9 @@ +{ + "aarch64-gcc": "https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz", + "arm-clang": "https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-19.1.1/LLVM-ET-Arm-19.1.1-Linux-x86_64.tar.xz", + "arm-gcc": "https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v13.2.1-1.1/xpack-arm-none-eabi-gcc-13.2.1-1.1-linux-x64.tar.gz", + "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", + "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz", + "rx-gcc": "https://github.com/hathach/rx_device/releases/download/0.0.1/gcc-8.3.0.202411-GNURX-ELF.run", + "arm-iar": "https://netstorage.iar.com/FileStore/STANDARD/001/003/583/cxarm-9.60.4.deb" +} diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 547763bd8..7fb13af74 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -110,37 +110,25 @@ jobs: one-per-family: true # --------------------------------------- - # Build IAR on HFP self-hosted - # Since IAR Token secret is not passed to forked PR, only build on PR from the same repo + # Build IAR + # Since IAR Token secret is not passed to forked PR, only build non-forked PR with make. + # cmake is built by circle-ci. Due to IAR limit capacity, only build oe per family # --------------------------------------- arm-iar: - if: github.repository_owner == 'hathach' && github.event_name == 'push' + if: github.event_name == 'pull_request' && github.event.pull_request.head.repo.fork == false needs: set-matrix - runs-on: [self-hosted, Linux, X64, hifiphile] - env: - BUILD_ARGS: ${{ join(fromJSON(needs.set-matrix.outputs.json)['arm-iar'], ' ') }} - IAR_LMS_CLOUD_URL: ${{ vars.IAR_LMS_CLOUD_URL }} - IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} - steps: - - name: Clean workspace - run: | - echo "Cleaning up previous run" - rm -rf "${{ github.workspace }}" - mkdir -p "${{ github.workspace }}" - - - name: Toolchain version - run: | - echo IAR_LMS_CLOUD_URL=$IAR_LMS_CLOUD_URL - iccarm --version - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Get Dependencies - run: python3 tools/get_deps.py $BUILD_ARGS - - - name: Build - run: python3 tools/build.py --one-per-family --toolchain iar $BUILD_ARGS + uses: ./.github/workflows/build_util.yml + secrets: inherit + strategy: + fail-fast: false + matrix: + build-system: + - 'make' + with: + build-system: ${{ matrix.build-system }} + toolchain: 'arm-iar' + build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)['arm-iar']) }} + one-per-family: true # --------------------------------------- # Zephyr diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index 2de68c6f3..a2c96f3c0 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -58,6 +58,8 @@ jobs: shell: bash - name: Build + env: + IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} run: | if [ "${{ inputs.toolchain }}" == "esp-idf" ]; then docker run --rm -v $PWD:/project -w /project espressif/idf:tinyusb python tools/build.py ${{ matrix.arg }} diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml index c890933ec..0ad37ffce 100644 --- a/.github/workflows/hil_test.yml +++ b/.github/workflows/hil_test.yml @@ -90,13 +90,12 @@ jobs: # --------------------------------------- # Hardware in the loop (HIL) # self-hosted by HFP, build with IAR toolchain, for attached hardware checkout test/hil/hfp.json - # Since IAR Token secret is not passed to forked PR, only build on PR from the same repo + # Since IAR Token secret is not passed to forked PR, only build non-forked PR # --------------------------------------- hil-hfp: if: github.repository_owner == 'hathach' && github.event.pull_request.head.repo.fork == false runs-on: [self-hosted, Linux, X64, hifiphile] env: - IAR_LMS_CLOUD_URL: ${{ vars.IAR_LMS_CLOUD_URL }} IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} steps: - name: Clean workspace @@ -107,7 +106,6 @@ jobs: - name: Toolchain version run: | - echo IAR_LMS_CLOUD_URL=$IAR_LMS_CLOUD_URL iccarm --version - name: Checkout TinyUSB diff --git a/examples/build_system/make/cpu/cortex-m4.mk b/examples/build_system/make/cpu/cortex-m4.mk index 4e16819d1..57d6e126d 100644 --- a/examples/build_system/make/cpu/cortex-m4.mk +++ b/examples/build_system/make/cpu/cortex-m4.mk @@ -12,8 +12,8 @@ else ifeq ($(TOOLCHAIN),clang) -mfpu=fpv4-sp-d16 \ else ifeq ($(TOOLCHAIN),iar) - CFLAGS += --cpu cortex-m4 --fpu VFPv4 - ASFLAGS += --cpu cortex-m4 --fpu VFPv4 + CFLAGS += --cpu cortex-m4 --fpu VFPv4-SP + ASFLAGS += --cpu cortex-m4 --fpu VFPv4-SP else $(error "TOOLCHAIN is not supported") diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index d325d77fa..9645f4bfc 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -40,17 +40,15 @@ static bool ejected = false; If you find any bugs or get any questions, feel free to file an\r\n\ issue at github.com/hathach/tinyusb" -enum -{ - DISK_BLOCK_NUM = 16, // 8KB is the smallest size that windows allow to mount +enum { + DISK_BLOCK_NUM = 16,// 8KB is the smallest size that windows allow to mount DISK_BLOCK_SIZE = 512 }; #ifdef CFG_EXAMPLE_MSC_READONLY const #endif -uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = -{ +uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { //------------- Block0: Boot Sector -------------// // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; // sector_per_cluster = 1; reserved_sectors = 1; @@ -59,60 +57,59 @@ uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = // drive_number = 0x80; media_type = 0xf8; extended_boot_signature = 0x29; // filesystem_type = "FAT12 "; volume_serial_number = 0x1234; volume_label = "TinyUSB MSC"; // FAT magic code at offset 510-511 - { - 0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00, - 0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' , - 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00, +{ + 0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00, + 0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T', 'i', 'n', 'y', 'U', + 'S', 'B', ' ', 'M', 'S', 'C', 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00, - // Zero up to 2 last bytes of FAT magic code - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + // Zero up to 2 last bytes of FAT magic code + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA - }, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA}, //------------- Block1: FAT12 Table -------------// - { - 0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file +{ + 0xF8, 0xFF, 0xFF, 0xFF, 0x0F// // first 2 entries must be F8FF, third entry is cluster end of readme file }, //------------- Block2: Root Directory -------------// - { - // first entry is volume label - 'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x08, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - // second entry is readme file - 'R' , 'E' , 'A' , 'D' , 'M' , 'E' , ' ' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D, - 0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00, - sizeof(README_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes) +{ + // first entry is volume label + 'T', 'i', 'n', 'y', 'U', 'S', 'B', ' ', 'M', 'S', 'C', 0x08, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + // second entry is readme file + 'R', 'E', 'A', 'D', 'M', 'E', ' ', ' ', 'T', 'X', 'T', 0x20, 0x00, 0xC6, 0x52, 0x6D, + 0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00, + sizeof(README_CONTENTS) - 1, 0x00, 0x00, 0x00// readme's files size (4 Bytes) }, //------------- Block3: Readme Content -------------// @@ -121,23 +118,21 @@ uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = // Invoked when received SCSI_CMD_INQUIRY // Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively -void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) -{ +void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) { (void) lun; const char vid[] = "TinyUSB"; const char pid[] = "Mass Storage"; const char rev[] = "1.0"; - memcpy(vendor_id , vid, strlen(vid)); - memcpy(product_id , pid, strlen(pid)); + memcpy(vendor_id, vid, strlen(vid)); + memcpy(product_id, pid, strlen(pid)); memcpy(product_rev, rev, strlen(rev)); } // Invoked when received Test Unit Ready command. // return true allowing host to read/write this LUN e.g SD card inserted -bool tud_msc_test_unit_ready_cb(uint8_t lun) -{ +bool tud_msc_test_unit_ready_cb(uint8_t lun) { (void) lun; // RAM disk is ready until ejected @@ -152,29 +147,24 @@ bool tud_msc_test_unit_ready_cb(uint8_t lun) // Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size // Application update block count and block size -void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size) -{ +void tud_msc_capacity_cb(uint8_t lun, uint32_t *block_count, uint16_t *block_size) { (void) lun; *block_count = DISK_BLOCK_NUM; - *block_size = DISK_BLOCK_SIZE; + *block_size = DISK_BLOCK_SIZE; } // Invoked when received Start Stop Unit command // - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage // - Start = 1 : active mode, if load_eject = 1 : load disk storage -bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) -{ +bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) { (void) lun; (void) power_condition; - if ( load_eject ) - { - if (start) - { + if (load_eject) { + if (start) { // load disk storage - }else - { + } else { // unload disk storage ejected = true; } @@ -185,52 +175,51 @@ bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, boo // Callback invoked when received READ10 command. // Copy disk's data to buffer (up to bufsize) and return number of copied bytes. -int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) -{ +int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void *buffer, uint32_t bufsize) { (void) lun; // out of ramdisk - if ( lba >= DISK_BLOCK_NUM ) { + if (lba >= DISK_BLOCK_NUM) { return -1; } // Check for overflow of offset + bufsize - if ( offset + bufsize > DISK_BLOCK_SIZE ) { + if (offset + bufsize > DISK_BLOCK_SIZE) { return -1; } - uint8_t const* addr = msc_disk[lba] + offset; + uint8_t const *addr = msc_disk[lba] + offset; memcpy(buffer, addr, bufsize); return (int32_t) bufsize; } -bool tud_msc_is_writable_cb (uint8_t lun) -{ +bool tud_msc_is_writable_cb(uint8_t lun) { (void) lun; -#ifdef CFG_EXAMPLE_MSC_READONLY + #ifdef CFG_EXAMPLE_MSC_READONLY return false; -#else + #else return true; -#endif + #endif } // Callback invoked when received WRITE10 command. // Process data in buffer to disk's storage and return number of written bytes -int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) -{ +int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t *buffer, uint32_t bufsize) { (void) lun; // out of ramdisk - if ( lba >= DISK_BLOCK_NUM ) return -1; + if (lba >= DISK_BLOCK_NUM) return -1; -#ifndef CFG_EXAMPLE_MSC_READONLY - uint8_t* addr = msc_disk[lba] + offset; + #ifndef CFG_EXAMPLE_MSC_READONLY + uint8_t *addr = msc_disk[lba] + offset; memcpy(addr, buffer, bufsize); -#else - (void) lba; (void) offset; (void) buffer; -#endif + #else + (void) lba; + (void) offset; + (void) buffer; + #endif return (int32_t) bufsize; } @@ -238,42 +227,18 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* // Callback invoked when received an SCSI command not in built-in list below // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE // - READ10 and WRITE10 has their own callbacks -int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) -{ - // read10 & write10 has their own callback and MUST not be handled here - - void const* response = NULL; - int32_t resplen = 0; +int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void *buffer, uint16_t bufsize) { + (void) buffer; + (void) bufsize; - // most scsi handled is input - bool in_xfer = true; - - switch (scsi_cmd[0]) - { + switch (scsi_cmd[0]) { default: // Set Sense = Invalid Command Operation tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); // negative means error -> tinyusb could stall and/or response with failed status - resplen = -1; - break; - } - - // return resplen must not larger than bufsize - if ( resplen > bufsize ) resplen = bufsize; - - if ( response && (resplen > 0) ) - { - if(in_xfer) - { - memcpy(buffer, response, (size_t) resplen); - }else - { - // SCSI output - } + return -1; } - - return (int32_t) resplen; } #endif diff --git a/examples/device/msc_dual_lun/src/msc_disk_dual.c b/examples/device/msc_dual_lun/src/msc_disk_dual.c index b44b77c6c..1f7fb98c7 100644 --- a/examples/device/msc_dual_lun/src/msc_disk_dual.c +++ b/examples/device/msc_dual_lun/src/msc_disk_dual.c @@ -55,8 +55,7 @@ If you find any bugs or get any questions, feel free to file an\r\n\ issue at github.com/hathach/tinyusb" -MSC_CONST uint8_t msc_disk0[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = -{ +MSC_CONST uint8_t msc_disk0[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { //------------- Block0: Boot Sector -------------// // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; // sector_per_cluster = 1; reserved_sectors = 1; @@ -283,9 +282,11 @@ bool tud_msc_is_writable_cb(uint8_t lun) { // Process data in buffer to disk's storage and return number of written bytes int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) { // out of ramdisk - if (lba >= DISK_BLOCK_NUM) return -1; + if (lba >= DISK_BLOCK_NUM) { + return -1; + } -#if defined(CFG_EXAMPLE_MSC_READONLY) || defined(CFG_EXAMPLE_MSC_DUAL_READONLY) + #if defined(CFG_EXAMPLE_MSC_READONLY) || defined(CFG_EXAMPLE_MSC_DUAL_READONLY) (void) lun; (void) lba; (void) offset; @@ -302,11 +303,8 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE // - READ10 and WRITE10 has their own callbacks (MUST not be handled here) int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) { - void const* response = NULL; - int32_t resplen = 0; - - // most scsi handled is input - bool in_xfer = true; + (void) buffer; + (void) bufsize; switch (scsi_cmd[0]) { default: @@ -316,19 +314,6 @@ int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, u // negative means error -> tinyusb could stall and/or response with failed status return -1; } - - // return resplen must not larger than bufsize - if (resplen > bufsize) resplen = bufsize; - - if (response && (resplen > 0)) { - if (in_xfer) { - memcpy(buffer, response, (size_t) resplen); - } else { - // SCSI output - } - } - - return resplen; } #endif diff --git a/examples/host/msc_file_explorer/Makefile b/examples/host/msc_file_explorer/Makefile index c7d6a7cae..f0872376f 100644 --- a/examples/host/msc_file_explorer/Makefile +++ b/examples/host/msc_file_explorer/Makefile @@ -22,6 +22,6 @@ SRC_C += \ $(FATFS_PATH)/ffunicode.c \ # suppress warning caused by fatfs -CFLAGS += -Wno-error=cast-qual +CFLAGS_GCC += -Wno-error=cast-qual include ../../build_system/make/rules.mk diff --git a/hw/bsp/broadcom_32bit/family.mk b/hw/bsp/broadcom_32bit/family.mk index a282e9961..9d4a3b76c 100644 --- a/hw/bsp/broadcom_32bit/family.mk +++ b/hw/bsp/broadcom_32bit/family.mk @@ -15,7 +15,7 @@ CFLAGS += \ CROSS_COMPILE = arm-none-eabi- # mcu driver cause following warnings -CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls +CFLAGS_GCC += -Wno-error=cast-qual -Wno-error=redundant-decls SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ diff --git a/hw/bsp/broadcom_64bit/family.mk b/hw/bsp/broadcom_64bit/family.mk index 37d381f9f..1ce80e22b 100644 --- a/hw/bsp/broadcom_64bit/family.mk +++ b/hw/bsp/broadcom_64bit/family.mk @@ -14,7 +14,7 @@ CFLAGS += \ CROSS_COMPILE = aarch64-none-elf- # mcu driver cause following warnings -CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls +CFLAGS_GCC += -Wno-error=cast-qual -Wno-error=redundant-decls SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ diff --git a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.mk b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.mk index c4dc65b63..fb3eb2a03 100644 --- a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.mk +++ b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.mk @@ -3,7 +3,7 @@ MCU = K32L2A41A CFLAGS += -DCPU_K32L2A41VLH1A # mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls -Wno-error=cast-qual +CFLAGS_GCC += -Wno-error=unused-parameter -Wno-error=redundant-decls -Wno-error=cast-qual # All source paths should be relative to the top level. LD_FILE = $(MCU_DIR)/gcc/K32L2A41xxxxA_flash.ld diff --git a/hw/bsp/lpc15/family.mk b/hw/bsp/lpc15/family.mk index b83e008e8..3b63580c0 100644 --- a/hw/bsp/lpc15/family.mk +++ b/hw/bsp/lpc15/family.mk @@ -15,7 +15,7 @@ CFLAGS += \ LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=unused-variable -Wno-error=cast-qual +CFLAGS_GCC += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=unused-variable -Wno-error=cast-qual MCU_DIR = hw/mcu/nxp/lpcopen/lpc15xx/lpc_chip_15xx diff --git a/hw/bsp/lpc17/family.mk b/hw/bsp/lpc17/family.mk index d719a47b7..551eb9e62 100644 --- a/hw/bsp/lpc17/family.mk +++ b/hw/bsp/lpc17/family.mk @@ -13,7 +13,7 @@ CFLAGS += \ -DRTC_EV_SUPPORT=0 # lpc_types.h cause following errors -CFLAGS += -Wno-error=strict-prototypes -Wno-error=cast-qual +CFLAGS_GCC += -Wno-error=strict-prototypes -Wno-error=cast-qual # caused by freeRTOS port !! CFLAGS += -Wno-error=maybe-uninitialized diff --git a/hw/bsp/lpc18/family.mk b/hw/bsp/lpc18/family.mk index f120f63b2..87b831255 100644 --- a/hw/bsp/lpc18/family.mk +++ b/hw/bsp/lpc18/family.mk @@ -12,7 +12,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_LPC18XX # mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-qual +CFLAGS_GCC += -Wno-error=unused-parameter -Wno-error=cast-qual LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs diff --git a/hw/bsp/lpc40/family.mk b/hw/bsp/lpc40/family.mk index ef9fe57b2..06155c760 100644 --- a/hw/bsp/lpc40/family.mk +++ b/hw/bsp/lpc40/family.mk @@ -13,7 +13,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_LPC40XX # mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=cast-qual +CFLAGS_GCC += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=cast-qual LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs diff --git a/hw/bsp/lpc43/family.mk b/hw/bsp/lpc43/family.mk index e1406aae7..4a2ba6ec3 100644 --- a/hw/bsp/lpc43/family.mk +++ b/hw/bsp/lpc43/family.mk @@ -5,14 +5,14 @@ include ${TOP}/${BOARD_PATH}/board.mk CPU_CORE ?= cortex-m4 CFLAGS += \ - -flto \ - -nostdlib \ -DCORE_M4 \ -D__USE_LPCOPEN \ -DCFG_TUSB_MCU=OPT_MCU_LPC43XX # mcu driver cause following warnings -CFLAGS += \ +CFLAGS_GCC += \ + -flto \ + -nostdlib \ -Wno-error=unused-parameter \ -Wno-error=cast-qual \ -Wno-error=incompatible-pointer-types \ diff --git a/hw/bsp/rp2040/boards/raspberry_pi_pico_w/board.cmake b/hw/bsp/rp2040/boards/raspberry_pi_pico_w/board.cmake new file mode 100644 index 000000000..97621d855 --- /dev/null +++ b/hw/bsp/rp2040/boards/raspberry_pi_pico_w/board.cmake @@ -0,0 +1,2 @@ +set(PICO_PLATFORM rp2040) +set(PICO_BOARD pico_w) diff --git a/hw/bsp/rp2040/boards/raspberry_pi_pico_w/board.h b/hw/bsp/rp2040/boards/raspberry_pi_pico_w/board.h new file mode 100644 index 000000000..8af32fc9e --- /dev/null +++ b/hw/bsp/rp2040/boards/raspberry_pi_pico_w/board.h @@ -0,0 +1,70 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2025 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Pico + url: https://www.raspberrypi.com/products/raspberry-pi-pico/ +*/ + +#ifndef TUSB_BOARD_H +#define TUSB_BOARD_H + +#ifdef __cplusplus + extern "C" { +#endif + +// UART and LED are already defined in pico-sdk board + +//--------------------------------------------------------------------+ +// PIO_USB +//--------------------------------------------------------------------+ +// default to pico brain tester +#define PICO_DEFAULT_PIO_USB_DP_PIN 20 +#define PICO_DEFAULT_PIO_USB_VBUSEN_PIN 22 +#define PICO_DEFAULT_PIO_USB_VBUSEN_STATE 1 + +//-------------------------------------------------------------------- +// USB Host MAX3421E +//-------------------------------------------------------------------- + +#ifdef PICO_DEFAULT_SPI +#define MAX3421_SPI PICO_DEFAULT_SPI // sdk v2 +#else +#define MAX3421_SPI PICO_DEFAULT_SPI_INSTANCE // sdk v1 +#endif + +#define MAX3421_SCK_PIN PICO_DEFAULT_SPI_SCK_PIN +#define MAX3421_MOSI_PIN PICO_DEFAULT_SPI_TX_PIN +#define MAX3421_MISO_PIN PICO_DEFAULT_SPI_RX_PIN +#define MAX3421_CS_PIN 10 +#define MAX3421_INTR_PIN 9 + + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/rp2040/skip_ci.txt b/hw/bsp/rp2040/skip_ci.txt new file mode 100644 index 000000000..fe99c9f65 --- /dev/null +++ b/hw/bsp/rp2040/skip_ci.txt @@ -0,0 +1,7 @@ +# boards in this files are skipped when running CI with this family +adafruit_feather_rp2040_usb_host +adafruit_fruit_jam +adafruit_metro_rp2350 +feather_rp2040_max3421 +pico_sdk +raspberry_pi_pico_w diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/board.mk b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.mk index ba185d199..6e681ef57 100644 --- a/hw/bsp/stm32f2/boards/stm32f207nucleo/board.mk +++ b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.mk @@ -1,12 +1,9 @@ -CFLAGS += \ - -DSTM32F207xx \ +MCU_VARIANT = stm32f207xx +CFLAGS += -DSTM32F207xx # All source paths should be relative to the top level. LD_FILE = $(BOARD_PATH)/STM32F207ZGTx_FLASH.ld -SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f207xx.s - # For flash-jlink target JLINK_DEVICE = stm32f207zg diff --git a/hw/bsp/stm32f2/family.mk b/hw/bsp/stm32f2/family.mk index 7af9a76a0..e8f02548d 100644 --- a/hw/bsp/stm32f2/family.mk +++ b/hw/bsp/stm32f2/family.mk @@ -1,5 +1,4 @@ ST_FAMILY = f2 - ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver @@ -14,11 +13,10 @@ CPU_CORE ?= cortex-m3 CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_STM32F2 +# mcu driver cause following warnings CFLAGS_GCC += \ -flto \ - -# mcu driver cause following warnings -CFLAGS_GCC += -Wno-error=sign-compare + -Wno-error=sign-compare LDFLAGS_GCC += \ -nostdlib -nostartfiles \ @@ -40,3 +38,10 @@ INC += \ $(TOP)/$(ST_CMSIS)/Include \ $(TOP)/$(ST_HAL_DRIVER)/Inc \ $(TOP)/$(BOARD_PATH) + +# Startup +SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_${MCU_VARIANT}.s +SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_${MCU_VARIANT}.s + +# Linker +LD_FILE_IAR ?= $(ST_CMSIS)/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/board.mk b/hw/bsp/stm32f3/boards/stm32f303disco/board.mk index e387f2d54..6b9a3e283 100644 --- a/hw/bsp/stm32f3/boards/stm32f303disco/board.mk +++ b/hw/bsp/stm32f3/boards/stm32f303disco/board.mk @@ -1,12 +1,10 @@ +MCU_VARIANT = stm32f303xc CFLAGS += \ -DSTM32F303xC \ # All source paths should be relative to the top level. LD_FILE = $(BOARD_PATH)/STM32F303VCTx_FLASH.ld -SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f303xc.s - # For flash-jlink target JLINK_DEVICE = stm32f303vc diff --git a/hw/bsp/stm32f3/family.mk b/hw/bsp/stm32f3/family.mk index 4fe3aa99d..13734583a 100644 --- a/hw/bsp/stm32f3/family.mk +++ b/hw/bsp/stm32f3/family.mk @@ -1,22 +1,17 @@ ST_FAMILY = f3 - ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver -DEPS_SUBMODULES += \ - lib/CMSIS_5 \ - $(ST_CMSIS) \ - $(ST_HAL_DRIVER) - include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m4 CFLAGS += \ - -flto \ -DCFG_TUSB_MCU=OPT_MCU_STM32F3 # mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter +CFLAGS_GCC += \ + -flto \ + -Wno-error=unused-parameter LDFLAGS_GCC += \ -nostdlib -nostartfiles \ @@ -36,3 +31,10 @@ INC += \ $(TOP)/$(ST_CMSIS)/Include \ $(TOP)/$(ST_HAL_DRIVER)/Inc \ $(TOP)/$(BOARD_PATH) + +# Startup +SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_${MCU_VARIANT}.s +SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_${MCU_VARIANT}.s + +# Linker +LD_FILE_IAR ?= $(ST_CMSIS)/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf diff --git a/hw/bsp/stm32f4/family.mk b/hw/bsp/stm32f4/family.mk index 51ff43a60..c3c41dc3f 100644 --- a/hw/bsp/stm32f4/family.mk +++ b/hw/bsp/stm32f4/family.mk @@ -1,6 +1,5 @@ UF2_FAMILY_ID = 0x57755a57 ST_FAMILY = f4 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h index 334876e51..7c3f6414a 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -184,7 +184,7 @@ static MFXSTM32L152_Object_t mfx_obj = { 0 }; static MFXSTM32L152_IO_Mode_t* mfx_io = NULL; static uint32_t mfx_vbus_pin[2] = { MFXSTM32L152_GPIO_PIN_7, MFXSTM32L152_GPIO_PIN_9 }; -int32_t board_i2c_init(void) { +static int32_t board_i2c_init(void) { __HAL_RCC_I2C1_CLK_ENABLE(); __HAL_RCC_I2C1_FORCE_RESET(); __HAL_RCC_I2C1_RELEASE_RESET(); @@ -200,16 +200,16 @@ int32_t board_i2c_init(void) { return 0; } -int32_t board_i2c_deinit(void) { +static int32_t board_i2c_deinit(void) { return 0; } -int32_t i2c_readreg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { +static int32_t i2c_readreg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { TU_ASSERT (HAL_OK == HAL_I2C_Mem_Read(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); return 0; } -int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { +static int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { TU_ASSERT(HAL_OK == HAL_I2C_Mem_Write(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); return 0; } @@ -249,7 +249,7 @@ static inline void board_init2(void) { } // VBUS1 is actually controlled by USB3320C PHY (using dwc2 drivebus signal) -void board_vbus_set(uint8_t rhport, bool state) { +static void TU_ATTR_UNUSED board_vbus_set(uint8_t rhport, bool state) { if (mfx_io) { mfx_io->IO_WritePin(&mfx_obj, mfx_vbus_pin[rhport], state); } diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index e5228b29b..f8723b0c7 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -80,7 +80,7 @@ void OTG_HS_IRQHandler(void) { } #ifdef TRACE_ETM -void trace_etm_init(void) { +static void trace_etm_init(void) { // H7 trace pin is PE2 to PE6 GPIO_InitTypeDef gpio_init; gpio_init.Pin = GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6; @@ -94,7 +94,7 @@ void trace_etm_init(void) { DBGMCU->CR |= DBGMCU_CR_DBG_TRACECKEN | DBGMCU_CR_DBG_CKD1EN | DBGMCU_CR_DBG_CKD3EN; } #else - #define trace_etm_init() +#define trace_etm_init() #endif void board_init(void) { diff --git a/hw/bsp/stm32h7/family.mk b/hw/bsp/stm32h7/family.mk index 29b83cf7d..19a085424 100644 --- a/hw/bsp/stm32h7/family.mk +++ b/hw/bsp/stm32h7/family.mk @@ -45,11 +45,9 @@ CFLAGS += \ -DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} \ # GCC Flags -CFLAGS_GCC += \ - -flto \ - # suppress warning caused by vendor mcu driver CFLAGS_GCC += \ + -flto \ -Wno-error=cast-align \ -Wno-error=unused-parameter \ diff --git a/hw/bsp/stm32l0/boards/stm32l052dap52/board.mk b/hw/bsp/stm32l0/boards/stm32l052dap52/board.mk index 0b1348474..e63b41f12 100644 --- a/hw/bsp/stm32l0/boards/stm32l052dap52/board.mk +++ b/hw/bsp/stm32l0/boards/stm32l052dap52/board.mk @@ -1,10 +1,9 @@ +MCU_VARIANT = stm32l052xx CFLAGS += \ -DSTM32L052xx LD_FILE = $(BOARD_PATH)/STM32L052K8Ux_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l052xx.s - # For flash-jlink target JLINK_DEVICE = stm32l052k8 diff --git a/hw/bsp/stm32l0/boards/stm32l0538disco/board.mk b/hw/bsp/stm32l0/boards/stm32l0538disco/board.mk index deed519ba..f3e6978b0 100644 --- a/hw/bsp/stm32l0/boards/stm32l0538disco/board.mk +++ b/hw/bsp/stm32l0/boards/stm32l0538disco/board.mk @@ -1,12 +1,10 @@ +MCU_VARIANT = stm32l053xx CFLAGS += \ -DSTM32L053xx # All source paths should be relative to the top level. LD_FILE = $(BOARD_PATH)/STM32L053C8Tx_FLASH.ld -SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l053xx.s - # For flash-jlink target JLINK_DEVICE = STM32L053R8 diff --git a/hw/bsp/stm32l0/family.mk b/hw/bsp/stm32l0/family.mk index fe7561fc2..921b1b413 100644 --- a/hw/bsp/stm32l0/family.mk +++ b/hw/bsp/stm32l0/family.mk @@ -1,9 +1,4 @@ ST_FAMILY = l0 -DEPS_SUBMODULES += \ - lib/CMSIS_5 \ - hw/mcu/st/cmsis_device_$(ST_FAMILY) \ - hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver @@ -11,20 +6,17 @@ include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m0plus CFLAGS += \ - -flto \ -DCFG_EXAMPLE_MSC_READONLY \ -DCFG_EXAMPLE_VIDEO_READONLY \ -DCFG_TUSB_MCU=OPT_MCU_STM32L0 # mcu driver cause following warnings CFLAGS_GCC += \ + -flto \ -Wno-error=unused-parameter \ -Wno-error=redundant-decls \ -Wno-error=cast-align \ - -ifeq ($(TOOLCHAIN),gcc) -CFLAGS_GCC += -Wno-error=maybe-uninitialized -endif + -Wno-error=maybe-uninitialized \ CFLAGS_CLANG += \ -Wno-error=parentheses-equality @@ -48,3 +40,10 @@ INC += \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ $(TOP)/$(ST_CMSIS)/Include \ $(TOP)/$(ST_HAL_DRIVER)/Inc + +# Startup +SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_${MCU_VARIANT}.s +SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_${MCU_VARIANT}.s + +# Linker +LD_FILE_IAR ?= $(ST_CMSIS)/Source/Templates/iar/linker/$(MCU_VARIANT)_flash.icf diff --git a/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.mk b/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.mk index ae63afef3..0a2c47030 100644 --- a/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.mk +++ b/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.mk @@ -1,11 +1,9 @@ +MCU_VARIANT = stm32u585xx CFLAGS += \ -DSTM32U585xx \ # All source paths should be relative to the top level. LD_FILE = ${FAMILY_PATH}/linker/STM32U575xx_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s - -MCU_VARIANT = stm32u585xx # For flash-jlink target JLINK_DEVICE = stm32u585zi diff --git a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk index 072c595fb..0aba57ce4 100644 --- a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk +++ b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk @@ -1,11 +1,9 @@ +MCU_VARIANT = stm32u545xx CFLAGS += \ -DSTM32U545xx \ # All source paths should be relative to the top level. LD_FILE = ${FAMILY_PATH}/linker/STM32U545xx_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u545xx.s - -MCU_VARIANT = stm32u545xx # For flash-jlink target JLINK_DEVICE = stm32u545re diff --git a/hw/bsp/stm32u5/boards/stm32u575eval/board.mk b/hw/bsp/stm32u5/boards/stm32u575eval/board.mk index fee56f2ba..4bc9fea10 100644 --- a/hw/bsp/stm32u5/boards/stm32u575eval/board.mk +++ b/hw/bsp/stm32u5/boards/stm32u575eval/board.mk @@ -1,11 +1,9 @@ +MCU_VARIANT = stm32u575xx CFLAGS += \ -DSTM32U575xx \ # All source paths should be relative to the top level. LD_FILE = ${FAMILY_PATH}/linker/STM32U575xx_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s - -MCU_VARIANT = stm32u575xx # For flash-jlink target JLINK_DEVICE = stm32u575ai diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk index c83ec3999..d09dc5c46 100644 --- a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk +++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk @@ -1,11 +1,9 @@ +MCU_VARIANT = stm32u575xx CFLAGS += \ -DSTM32U575xx \ # All source paths should be relative to the top level. LD_FILE = ${FAMILY_PATH}/linker/STM32U575xx_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s - -MCU_VARIANT = stm32u575xx # For flash-jlink target JLINK_DEVICE = stm32u575zi diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk index 4bebe3330..c9fdbac1a 100644 --- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk @@ -1,3 +1,4 @@ +MCU_VARIANT = stm32u5a5xx CFLAGS += \ -DSTM32U5A5xx \ -DHSE_VALUE=16000000UL \ @@ -5,8 +6,5 @@ CFLAGS += \ # All source paths should be relative to the top level. LD_FILE = ${BOARD_PATH}/STM32U5A5ZJTXQ_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u5a5xx.s - -MCU_VARIANT = stm32u5a5xx # For flash-jlink target JLINK_DEVICE = stm32u575zi diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk index 05fe4608a..7fc728dcf 100644 --- a/hw/bsp/stm32u5/family.mk +++ b/hw/bsp/stm32u5/family.mk @@ -57,5 +57,12 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc \ $(TOP)/$(BOARD_PATH) +# Startup +SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(MCU_VARIANT).s +SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT).s + +# Linker +LD_FILE_IAR ?= $(ST_CMSIS)/Source/Templates/iar/linker/$(MCU_VARIANT)_flash.icf + # flash target using on-board stlink flash: flash-stlink diff --git a/hw/bsp/stm32wb/family.mk b/hw/bsp/stm32wb/family.mk index de8372eea..a80ff6f5b 100644 --- a/hw/bsp/stm32wb/family.mk +++ b/hw/bsp/stm32wb/family.mk @@ -9,14 +9,12 @@ include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m4 CFLAGS += \ - -flto \ - -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_STM32WB -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=cast-align -Wno-unused-parameter - -LD_FILE ?= ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash_cm4.ld +CFLAGS_GCC += \ + -flto \ + -nostdlib -nostartfiles \ + -Wno-error=cast-align -Wno-unused-parameter LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs @@ -25,19 +23,26 @@ SRC_C += \ $(ST_CMSIS)/Source/Templates/system_${ST_PREFIX}.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pwr.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pwr_ex.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rcc.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rcc_ex.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_uart.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_gpio.c -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_${MCU_VARIANT}_cm4.s - INC += \ $(TOP)/$(BOARD_PATH) \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ $(TOP)/$(ST_CMSIS)/Include \ $(TOP)/$(ST_HAL_DRIVER)/Inc +# Startup +SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(MCU_VARIANT)_cm4.s +SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT)_cm4.s + +# Linker +LD_FILE_GCC ?= ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash_cm4.ld +LD_FILE_IAR ?= $(ST_CMSIS)/Source/Templates/iar/linker/$(MCU_VARIANT)_flash_cm4.icf + # flash target using on-board stlink flash: flash-stlink diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index 6670045aa..87c77c9a7 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -344,7 +344,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t msc_csw_t * p_csw = &p_msc->csw; switch (p_msc->stage) { - case MSC_STAGE_CMD: + case MSC_STAGE_CMD: { //------------- new CBW received -------------// // Complete IN while waiting for CMD is usually Status of previous SCSI op, ignore it if (ep_addr != p_msc->ep_out) { @@ -441,7 +441,8 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t } } } - break; + break; + } case MSC_STAGE_DATA: TU_LOG_DRV(" SCSI Data [Lun%u]\r\n", p_cbw->lun); diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 14ab4e63a..f292bca15 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -543,7 +543,7 @@ def test_example(board, f1, example): print(f'Flashing {fw_name}.elf') # flash firmware. It may fail randomly, retry a few times - max_rety = 2 + max_rety = 3 for i in range(max_rety): ret = globals()[f'flash_{board["flasher"]["name"].lower()}'](board, fw_name) if ret.returncode == 0: diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 8f39eb32e..8a835e4c0 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -127,6 +127,20 @@ } }, { + "name": "raspberry_pi_pico_w", + "uid": "E6614C311B764A37", + "tests": { + "device": false, "host": true, "dual": false, + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2023934"}] + }, + "flasher": { + "name": "openocd", + "uid": "E6633861A3819D38", + "args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"" + }, + "comment": "Test native host" + }, + { "name": "raspberry_pi_pico2", "uid": "560AE75E1C7152C9", "build" : { diff --git a/tools/build.py b/tools/build.py index 633d2b582..d28ddd929 100755 --- a/tools/build.py +++ b/tools/build.py @@ -182,9 +182,14 @@ def build_boards_list(boards, toolchain, build_system, build_flags_on): def build_family(family, toolchain, build_system, build_flags_on, one_per_family, boards): + skip_ci = ['pico_sdk'] + if os.getenv('GITHUB_ACTIONS') or os.getenv('CIRCLECI'): + skip_ci_file = Path(f"hw/bsp/{family}/skip_ci.txt") + if skip_ci_file.exists(): + skip_ci = skip_ci_file.read_text().split() all_boards = [] for entry in os.scandir(f"hw/bsp/{family}/boards"): - if entry.is_dir() and entry.name != 'pico_sdk': + if entry.is_dir() and not entry.name in skip_ci: all_boards.append(entry.name) all_boards.sort() |