diff options
140 files changed, 4179 insertions, 229 deletions
diff --git a/.github/workflows/build_aarch64.yml b/.github/workflows/build_aarch64.yml index 0cc7a5de1..8cf7852b9 100644 --- a/.github/workflows/build_aarch64.yml +++ b/.github/workflows/build_aarch64.yml @@ -18,7 +18,7 @@ jobs: matrix: family: # Alphabetical order - - 'raspberrypi4' + - 'broadcom_64bit' steps: - name: Setup Python uses: actions/setup-python@v2 diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index dc4d9fcfb..177f1076e 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -39,6 +39,7 @@ jobs: matrix: family: # Alphabetical order + - 'broadcom_32bit' - 'imxrt' - 'lpc15' - 'lpc18' @@ -114,7 +115,7 @@ jobs: done # --------------------------------------- - # Build all no-family (opharned) boards + # Build all no-family (orphaned) boards # --------------------------------------- build-board: runs-on: ubuntu-latest diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml index 57dbf33e3..1ed76ef4d 100644 --- a/.github/workflows/build_esp.yml +++ b/.github/workflows/build_esp.yml @@ -18,7 +18,7 @@ jobs: # ESP32-S2 - 'espressif_saola_1' # ESP32-S3 - #- 'espressif_addax_1' + #- 'espressif_s3_devkitm' # S3 compile error with "dangerous relocation: call8: call target out of range: memcpy" steps: diff --git a/.gitignore b/.gitignore index f7adff4c9..87a5faa80 100644 --- a/.gitignore +++ b/.gitignore @@ -26,3 +26,5 @@ cov-int # cppcheck build directories *-build-dir /_bin/ +__pycache__ + diff --git a/README.rst b/README.rst index a8ce9399c..03219db3f 100644 --- a/README.rst +++ b/README.rst @@ -50,7 +50,7 @@ The stack supports the following MCUs: - **Renesas:** RX63N, RX65N, RX72N - **Silabs:** EFM32GG - **Sony:** CXD56 -- **ST:** STM32 series: F0, F1, F2, F3, F4, F7, H7, L0, L1, L4, L4+ +- **ST:** STM32 series: F0, F1, F2, F3, F4, F7, H7, G4, L0, L1, L4, L4+ - **TI:** MSP430, MSP432E4, TM4C123 - **ValentyUSB:** eptri diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index e3cb8c679..1f7f395cb 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -82,6 +82,8 @@ Supported MCUs | +-----------------------+--------+------+-----------+-------------------+--------------+ | | H7 | ✔ | | ✔ | dwc2 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ +| | G4 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ | | L0, L1 | ✔ | ✖ | ✖ | stm32_fsdev | | | +----+------------------+--------+------+-----------+-------------------+--------------+ | | L4 | 4x2, 4x3 | ✔ | ✖ | ✖ | stm32_fsdev | | @@ -243,6 +245,7 @@ Kinetis - `Freedom FRDM-KL25Z <https://www.nxp.com/design/development-boards/freedom-development-boards/mcu-boards/freedom-development-platform-for-kinetis-kl14-kl15-kl24-kl25-mcus:FRDM-KL25Z>`__ - `Freedom FRDM-K32L2B3 <https://www.nxp.com/design/development-boards/freedom-development-boards/mcu-boards/nxp-freedom-development-platform-for-k32-l2b-mcus:FRDM-K32L2B3>`__ +- `KUIIC <https://github.com/nxf58843/kuiic>`__ LPC 11-13-15 ^^^^^^^^^^^^ @@ -341,6 +344,7 @@ F4 - `STM32 F411ve Discovery <https://www.st.com/en/evaluation-tools/32f411ediscovery.html>`__ - `STM32 F412zg Discovery <https://www.st.com/en/evaluation-tools/32f412gdiscovery.html>`__ - `STM32 F412zg Nucleo <https://www.st.com/en/evaluation-tools/nucleo-f412zg.html>`__ +- `STM32 F439zi Nucleo <https://www.st.com/en/evaluation-tools/nucleo-f439zi.html>`__ F7 ^^ @@ -352,6 +356,17 @@ F7 - `STM32 F767zi Nucleo <https://www.st.com/en/evaluation-tools/nucleo-f767zi.html>`__ - `STM32 F769i Discovery <https://www.st.com/en/evaluation-tools/32f769idiscovery.html>`__ +H7 +^^ +- `STM32 H743zi Nucleo <https://www.st.com/en/evaluation-tools/nucleo-h743zi.html>`__ +- `STM32 H743i Evaluation <https://www.st.com/en/evaluation-tools/stm32h743i-eval.html>`__ +- `STM32 H745i Discovery <https://www.st.com/en/evaluation-tools/stm32h745i-disco.html>`__ +- `Waveshare OpenH743I-C <https://www.waveshare.com/openh743i-c-standard.htm>`__ + +G4 +^^ +- `STM32 G474RE Nucleo <https://www.st.com/en/evaluation-tools/nucleo-g474re.html>`__ + L0 ^^ - `STM32 L035c8 Discovery <https://www.st.com/en/evaluation-tools/32l0538discovery.html>`__ @@ -362,13 +377,6 @@ L4 - `STM32 L4P5zg Nucleo <https://www.st.com/en/evaluation-tools/nucleo-l4p5zg.html>`__ - `STM32 L4R5zi Nucleo <https://www.st.com/en/evaluation-tools/nucleo-l4r5zi.html>`__ -H7 -^^ -- `STM32 H743zi Nucleo <https://www.st.com/en/evaluation-tools/nucleo-h743zi.html>`__ -- `STM32 H743i Evaluation <https://www.st.com/en/evaluation-tools/stm32h743i-eval.html>`__ -- `STM32 H745i Discovery <https://www.st.com/en/evaluation-tools/stm32h745i-disco.html>`__ -- `Waveshare OpenH743I-C <https://www.waveshare.com/openh743i-c-standard.htm>`__ - TI -- diff --git a/examples/device/audio_4_channel_mic/.skip.MCU_SAMD11 b/examples/device/audio_4_channel_mic/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/audio_4_channel_mic/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/audio_4_channel_mic/.skip.MCU_SAME5X b/examples/device/audio_4_channel_mic/.skip.MCU_SAME5X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/audio_4_channel_mic/.skip.MCU_SAME5X +++ /dev/null diff --git a/examples/device/audio_4_channel_mic/.skip.MCU_SAMG b/examples/device/audio_4_channel_mic/.skip.MCU_SAMG deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/audio_4_channel_mic/.skip.MCU_SAMG +++ /dev/null diff --git a/examples/device/audio_4_channel_mic/skip.txt b/examples/device/audio_4_channel_mic/skip.txt new file mode 100644 index 000000000..ae9b57f1f --- /dev/null +++ b/examples/device/audio_4_channel_mic/skip.txt @@ -0,0 +1,3 @@ +mcu:SAMD11 +mcu:SAME5X +mcu:SAMG
\ No newline at end of file diff --git a/examples/device/audio_test/.skip.MCU_SAMD11 b/examples/device/audio_test/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/audio_test/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/audio_test/.skip.MCU_SAME5X b/examples/device/audio_test/.skip.MCU_SAME5X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/audio_test/.skip.MCU_SAME5X +++ /dev/null diff --git a/examples/device/audio_test/.skip.MCU_SAMG b/examples/device/audio_test/.skip.MCU_SAMG deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/audio_test/.skip.MCU_SAMG +++ /dev/null diff --git a/examples/device/audio_test/skip.txt b/examples/device/audio_test/skip.txt new file mode 100644 index 000000000..ae9b57f1f --- /dev/null +++ b/examples/device/audio_test/skip.txt @@ -0,0 +1,3 @@ +mcu:SAMD11 +mcu:SAME5X +mcu:SAMG
\ No newline at end of file diff --git a/examples/device/cdc_msc/.skip.MCU_SAMD11 b/examples/device/cdc_msc/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/cdc_msc/skip.txt b/examples/device/cdc_msc/skip.txt new file mode 100644 index 000000000..d844feae8 --- /dev/null +++ b/examples/device/cdc_msc/skip.txt @@ -0,0 +1 @@ +mcu:SAMD11
\ No newline at end of file diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_BCM2711 b/examples/device/cdc_msc_freertos/.skip.MCU_BCM2711 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_BCM2711 +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_CXD56 b/examples/device/cdc_msc_freertos/.skip.MCU_CXD56 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_CXD56 +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103 b/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103 +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX b/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx b/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 b/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11 b/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X b/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI b/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/skip.txt b/examples/device/cdc_msc_freertos/skip.txt new file mode 100644 index 000000000..7137b78af --- /dev/null +++ b/examples/device/cdc_msc_freertos/skip.txt @@ -0,0 +1,10 @@ +mcu:CXD56 +mcu:MSP430x5xx +mcu:SAMD11 +mcu:VALENTYUSB_EPTRI +mcu:MKL25ZXX +mcu:RP2040 +mcu:SAMX7X +mcu:GD32VF103 +family:broadcom_64bit +family:broadcom_32bit
\ No newline at end of file diff --git a/examples/device/dfu/.skip.MCU_TM4C123 b/examples/device/dfu/.skip.MCU_TM4C123 deleted file mode 100644 index 6260e6e25..000000000 --- a/examples/device/dfu/.skip.MCU_TM4C123 +++ /dev/null @@ -1,4 +0,0 @@ -LINK _build/ek-tm4c123gxl/dfu.elf -/home/runner/cache/toolchain/xpack-arm-none-eabi-gcc-10.2.1-1.1/bin/../lib/gcc/arm-none-eabi/10.2.1/../../../../arm-none-eabi/bin/ld: section .ARM.exidx.text._close LMA [0000000000002980,0000000000002987] overlaps section .data LMA [0000000000002980,0000000000002a03] -collect2: error: ld returned 1 exit status -make: *** [../../rules.mk:94: _build/ek-tm4c123gxl/dfu.elf] Error 1
\ No newline at end of file diff --git a/examples/device/dfu/skip.txt b/examples/device/dfu/skip.txt new file mode 100644 index 000000000..9ac346bad --- /dev/null +++ b/examples/device/dfu/skip.txt @@ -0,0 +1,2 @@ +mcu:TM4C123 +mcu:BCM2835 diff --git a/examples/device/dynamic_configuration/.skip.MCU_SAMD11 b/examples/device/dynamic_configuration/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/dynamic_configuration/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/dynamic_configuration/skip.txt b/examples/device/dynamic_configuration/skip.txt new file mode 100644 index 000000000..d844feae8 --- /dev/null +++ b/examples/device/dynamic_configuration/skip.txt @@ -0,0 +1 @@ +mcu:SAMD11
\ No newline at end of file diff --git a/examples/device/hid_composite_freertos/.skip.MCU_BCM2711 b/examples/device/hid_composite_freertos/.skip.MCU_BCM2711 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/hid_composite_freertos/.skip.MCU_BCM2711 +++ /dev/null diff --git a/examples/device/hid_composite_freertos/.skip.MCU_CXD56 b/examples/device/hid_composite_freertos/.skip.MCU_CXD56 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/hid_composite_freertos/.skip.MCU_CXD56 +++ /dev/null diff --git a/examples/device/hid_composite_freertos/.skip.MCU_GD32VF103 b/examples/device/hid_composite_freertos/.skip.MCU_GD32VF103 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/hid_composite_freertos/.skip.MCU_GD32VF103 +++ /dev/null diff --git a/examples/device/hid_composite_freertos/.skip.MCU_MSP430x5xx b/examples/device/hid_composite_freertos/.skip.MCU_MSP430x5xx deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/hid_composite_freertos/.skip.MCU_MSP430x5xx +++ /dev/null diff --git a/examples/device/hid_composite_freertos/.skip.MCU_RP2040 b/examples/device/hid_composite_freertos/.skip.MCU_RP2040 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/hid_composite_freertos/.skip.MCU_RP2040 +++ /dev/null diff --git a/examples/device/hid_composite_freertos/.skip.MCU_SAMD11 b/examples/device/hid_composite_freertos/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/hid_composite_freertos/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/hid_composite_freertos/.skip.MCU_SAMX7X b/examples/device/hid_composite_freertos/.skip.MCU_SAMX7X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/hid_composite_freertos/.skip.MCU_SAMX7X +++ /dev/null diff --git a/examples/device/hid_composite_freertos/.skip.MCU_VALENTYUSB_EPTRI b/examples/device/hid_composite_freertos/.skip.MCU_VALENTYUSB_EPTRI deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/hid_composite_freertos/.skip.MCU_VALENTYUSB_EPTRI +++ /dev/null diff --git a/examples/device/hid_composite_freertos/skip.txt b/examples/device/hid_composite_freertos/skip.txt new file mode 100644 index 000000000..e64187fd4 --- /dev/null +++ b/examples/device/hid_composite_freertos/skip.txt @@ -0,0 +1,9 @@ +mcu:CXD56 +mcu:MSP430x5xx +mcu:SAMD11 +mcu:VALENTYUSB_EPTRI +mcu:RP2040 +mcu:SAMX7X +mcu:GD32VF103 +family:broadcom_64bit +family:broadcom_32bit
\ No newline at end of file diff --git a/examples/device/hid_generic_inout/hid_test.py b/examples/device/hid_generic_inout/hid_test.py index a42930fb5..21fd3f421 100644 --- a/examples/device/hid_generic_inout/hid_test.py +++ b/examples/device/hid_generic_inout/hid_test.py @@ -1,20 +1,22 @@ # Install python3 HID package https://pypi.org/project/hid/ import hid -USB_VID = 0xcafe +# default is TinyUSB (0xcafe), Adafruit (0x239a), RaspberryPi (0x2e8a), Espressif (0x303a) VID +USB_VID = (0xcafe, 0x239a, 0x2e8a, 0x303a) -print("Openning HID device with VID = 0x%X" % USB_VID) +print("VID list: " + ", ".join('%02x' % v for v in USB_VID)) -for dict in hid.enumerate(USB_VID): - print(dict) - dev = hid.Device(dict['vendor_id'], dict['product_id']) - if dev: - while True: - # Get input from console and encode to UTF8 for array of chars. - # hid generic inout is single report therefore by HIDAPI requirement - # it must be preceeded with 0x00 as dummy reportID - str_out = b'\x00' - str_out += input("Send text to HID Device : ").encode('utf-8') - dev.write(str_out) - str_in = dev.read(64) - print("Received from HID Device:", str_in, '\n') +for vid in USB_VID: + for dict in hid.enumerate(vid): + print(dict) + dev = hid.Device(dict['vendor_id'], dict['product_id']) + if dev: + while True: + # Get input from console and encode to UTF8 for array of chars. + # hid generic inout is single report therefore by HIDAPI requirement + # it must be preceeded with 0x00 as dummy reportID + str_out = b'\x00' + str_out += input("Send text to HID Device : ").encode('utf-8') + dev.write(str_out) + str_in = dev.read(64) + print("Received from HID Device:", str_in, '\n') diff --git a/examples/device/msc_dual_lun/.skip.MCU_MKL25ZXX b/examples/device/msc_dual_lun/.skip.MCU_MKL25ZXX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/msc_dual_lun/.skip.MCU_MKL25ZXX +++ /dev/null diff --git a/examples/device/msc_dual_lun/.skip.MCU_SAMD11 b/examples/device/msc_dual_lun/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/msc_dual_lun/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/msc_dual_lun/skip.txt b/examples/device/msc_dual_lun/skip.txt new file mode 100644 index 000000000..3549c702a --- /dev/null +++ b/examples/device/msc_dual_lun/skip.txt @@ -0,0 +1,2 @@ +mcu:SAMD11 +mcu:MKL25ZXX
\ No newline at end of file diff --git a/examples/device/net_lwip_webserver/.skip.MCU_BCM2711 b/examples/device/net_lwip_webserver/.skip.MCU_BCM2711 deleted file mode 100644 index bdc68f5db..000000000 --- a/examples/device/net_lwip_webserver/.skip.MCU_BCM2711 +++ /dev/null @@ -1 +0,0 @@ -tinyusb/lib/lwip/src/include/lwip/arch.h:202:13: error: conflicting types for 'ssize_t'
\ No newline at end of file diff --git a/examples/device/net_lwip_webserver/.skip.MCU_LPC11UXX b/examples/device/net_lwip_webserver/.skip.MCU_LPC11UXX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/net_lwip_webserver/.skip.MCU_LPC11UXX +++ /dev/null diff --git a/examples/device/net_lwip_webserver/.skip.MCU_LPC13XX b/examples/device/net_lwip_webserver/.skip.MCU_LPC13XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/net_lwip_webserver/.skip.MCU_LPC13XX +++ /dev/null diff --git a/examples/device/net_lwip_webserver/.skip.MCU_MKL25ZXX b/examples/device/net_lwip_webserver/.skip.MCU_MKL25ZXX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/net_lwip_webserver/.skip.MCU_MKL25ZXX +++ /dev/null diff --git a/examples/device/net_lwip_webserver/.skip.MCU_MSP430x5xx b/examples/device/net_lwip_webserver/.skip.MCU_MSP430x5xx deleted file mode 100644 index 17600f062..000000000 --- a/examples/device/net_lwip_webserver/.skip.MCU_MSP430x5xx +++ /dev/null @@ -1 +0,0 @@ -too many warnings for 16-bit integer overflow diff --git a/examples/device/net_lwip_webserver/.skip.MCU_NUC121 b/examples/device/net_lwip_webserver/.skip.MCU_NUC121 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/net_lwip_webserver/.skip.MCU_NUC121 +++ /dev/null diff --git a/examples/device/net_lwip_webserver/.skip.MCU_SAMD11 b/examples/device/net_lwip_webserver/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/net_lwip_webserver/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/net_lwip_webserver/.skip.MCU_STM32L0 b/examples/device/net_lwip_webserver/.skip.MCU_STM32L0 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/net_lwip_webserver/.skip.MCU_STM32L0 +++ /dev/null diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt new file mode 100644 index 000000000..68761b058 --- /dev/null +++ b/examples/device/net_lwip_webserver/skip.txt @@ -0,0 +1,10 @@ +mcu:LPC11UXX +mcu:LPC13XX +mcu:MSP430x5xx +mcu:NUC121 +mcu:SAMD11 +mcu:STM32L0 +mcu:MKL25ZXX +family:broadcom_64bit +family:broadcom_32bit +board:curiosity_nano
\ No newline at end of file diff --git a/examples/device/uac2_headset/.skip.MCU_LPC11UXX b/examples/device/uac2_headset/.skip.MCU_LPC11UXX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/uac2_headset/.skip.MCU_LPC11UXX +++ /dev/null diff --git a/examples/device/uac2_headset/.skip.MCU_LPC13XX b/examples/device/uac2_headset/.skip.MCU_LPC13XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/uac2_headset/.skip.MCU_LPC13XX +++ /dev/null diff --git a/examples/device/uac2_headset/.skip.MCU_NUC121 b/examples/device/uac2_headset/.skip.MCU_NUC121 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/uac2_headset/.skip.MCU_NUC121 +++ /dev/null diff --git a/examples/device/uac2_headset/.skip.MCU_SAMD11 b/examples/device/uac2_headset/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/uac2_headset/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/uac2_headset/.skip.MCU_SAME5X b/examples/device/uac2_headset/.skip.MCU_SAME5X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/uac2_headset/.skip.MCU_SAME5X +++ /dev/null diff --git a/examples/device/uac2_headset/.skip.MCU_SAMG b/examples/device/uac2_headset/.skip.MCU_SAMG deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/uac2_headset/.skip.MCU_SAMG +++ /dev/null diff --git a/examples/device/uac2_headset/skip.txt b/examples/device/uac2_headset/skip.txt new file mode 100644 index 000000000..9471822a4 --- /dev/null +++ b/examples/device/uac2_headset/skip.txt @@ -0,0 +1,6 @@ +mcu:LPC11UXX +mcu:LPC13XX +mcu:NUC121 +mcu:SAMD11 +mcu:SAME5X +mcu:SAMG
\ No newline at end of file diff --git a/examples/device/usbtmc/skip.txt b/examples/device/usbtmc/skip.txt new file mode 100644 index 000000000..a43106cf0 --- /dev/null +++ b/examples/device/usbtmc/skip.txt @@ -0,0 +1 @@ +mcu:BCM2835 diff --git a/examples/device/video_capture/.skip.MCU_MSP430x5xx b/examples/device/video_capture/.skip.MCU_MSP430x5xx deleted file mode 100644 index 17600f062..000000000 --- a/examples/device/video_capture/.skip.MCU_MSP430x5xx +++ /dev/null @@ -1 +0,0 @@ -too many warnings for 16-bit integer overflow diff --git a/examples/device/video_capture/.skip.MCU_SAMD11 b/examples/device/video_capture/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/video_capture/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/video_capture/skip.txt b/examples/device/video_capture/skip.txt new file mode 100644 index 000000000..892a8c6a7 --- /dev/null +++ b/examples/device/video_capture/skip.txt @@ -0,0 +1,2 @@ +mcu:MSP430x5xx +mcu:SAMD11
\ No newline at end of file diff --git a/examples/host/cdc_msc_hid/.only.MCU_LPC175X_6X b/examples/host/cdc_msc_hid/.only.MCU_LPC175X_6X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/cdc_msc_hid/.only.MCU_LPC175X_6X +++ /dev/null diff --git a/examples/host/cdc_msc_hid/.only.MCU_LPC177X_8X b/examples/host/cdc_msc_hid/.only.MCU_LPC177X_8X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/cdc_msc_hid/.only.MCU_LPC177X_8X +++ /dev/null diff --git a/examples/host/cdc_msc_hid/.only.MCU_LPC18XX b/examples/host/cdc_msc_hid/.only.MCU_LPC18XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/cdc_msc_hid/.only.MCU_LPC18XX +++ /dev/null diff --git a/examples/host/cdc_msc_hid/.only.MCU_LPC40XX b/examples/host/cdc_msc_hid/.only.MCU_LPC40XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/cdc_msc_hid/.only.MCU_LPC40XX +++ /dev/null diff --git a/examples/host/cdc_msc_hid/.only.MCU_LPC43XX b/examples/host/cdc_msc_hid/.only.MCU_LPC43XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/cdc_msc_hid/.only.MCU_LPC43XX +++ /dev/null diff --git a/examples/host/cdc_msc_hid/.only.MCU_MIMXRT10XX b/examples/host/cdc_msc_hid/.only.MCU_MIMXRT10XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/cdc_msc_hid/.only.MCU_MIMXRT10XX +++ /dev/null diff --git a/examples/host/cdc_msc_hid/.only.MCU_MSP432E4 b/examples/host/cdc_msc_hid/.only.MCU_MSP432E4 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/cdc_msc_hid/.only.MCU_MSP432E4 +++ /dev/null diff --git a/examples/host/cdc_msc_hid/.only.MCU_RP2040 b/examples/host/cdc_msc_hid/.only.MCU_RP2040 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/cdc_msc_hid/.only.MCU_RP2040 +++ /dev/null diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt new file mode 100644 index 000000000..db9a337e5 --- /dev/null +++ b/examples/host/cdc_msc_hid/only.txt @@ -0,0 +1,8 @@ +mcu:LPC175X_6X +mcu:LPC177X_8X +mcu:LPC18XX +mcu:LPC40XX +mcu:LPC43XX +mcu:MIMXRT10XX +mcu:RP2040 +mcu:MSP432E4
\ No newline at end of file diff --git a/examples/host/hid_controller/.only.MCU_LPC175X_6X b/examples/host/hid_controller/.only.MCU_LPC175X_6X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/hid_controller/.only.MCU_LPC175X_6X +++ /dev/null diff --git a/examples/host/hid_controller/.only.MCU_LPC177X_8X b/examples/host/hid_controller/.only.MCU_LPC177X_8X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/hid_controller/.only.MCU_LPC177X_8X +++ /dev/null diff --git a/examples/host/hid_controller/.only.MCU_LPC18XX b/examples/host/hid_controller/.only.MCU_LPC18XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/hid_controller/.only.MCU_LPC18XX +++ /dev/null diff --git a/examples/host/hid_controller/.only.MCU_LPC40XX b/examples/host/hid_controller/.only.MCU_LPC40XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/hid_controller/.only.MCU_LPC40XX +++ /dev/null diff --git a/examples/host/hid_controller/.only.MCU_LPC43XX b/examples/host/hid_controller/.only.MCU_LPC43XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/hid_controller/.only.MCU_LPC43XX +++ /dev/null diff --git a/examples/host/hid_controller/.only.MCU_MIMXRT10XX b/examples/host/hid_controller/.only.MCU_MIMXRT10XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/hid_controller/.only.MCU_MIMXRT10XX +++ /dev/null diff --git a/examples/host/hid_controller/.only.MCU_MSP432E4 b/examples/host/hid_controller/.only.MCU_MSP432E4 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/hid_controller/.only.MCU_MSP432E4 +++ /dev/null diff --git a/examples/host/hid_controller/.only.MCU_RP2040 b/examples/host/hid_controller/.only.MCU_RP2040 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/hid_controller/.only.MCU_RP2040 +++ /dev/null diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt new file mode 100644 index 000000000..db9a337e5 --- /dev/null +++ b/examples/host/hid_controller/only.txt @@ -0,0 +1,8 @@ +mcu:LPC175X_6X +mcu:LPC177X_8X +mcu:LPC18XX +mcu:LPC40XX +mcu:LPC43XX +mcu:MIMXRT10XX +mcu:RP2040 +mcu:MSP432E4
\ No newline at end of file diff --git a/examples/make.mk b/examples/make.mk index 793c40aa2..bed46d02b 100644 --- a/examples/make.mk +++ b/examples/make.mk @@ -54,6 +54,8 @@ endif #-------------- Cross Compiler ------------ # Can be set by board, default to ARM GCC CROSS_COMPILE ?= arm-none-eabi- +# Allow for -Os to be changed by board makefiles in case -Os is not allowed +CFLAGS_OPTIMIZED ?= -Os CC = $(CROSS_COMPILE)gcc CXX = $(CROSS_COMPILE)g++ @@ -112,7 +114,7 @@ CFLAGS += \ ifeq ($(DEBUG), 1) CFLAGS += -Og else - CFLAGS += -Os + CFLAGS += $(CFLAGS_OPTIMIZED) endif # Log level is mapped to TUSB DEBUG option diff --git a/examples/rules.mk b/examples/rules.mk index 4cc35cb22..95a9c9879 100644 --- a/examples/rules.mk +++ b/examples/rules.mk @@ -12,8 +12,10 @@ ifeq (,$(findstring $(FAMILY),esp32s2 esp32s3 rp2040)) # Compiler Flags # --------------------------------------- +LIBS_GCC ?= -lgcc -lm -lnosys + # libc -LIBS += -lgcc -lm -lnosys +LIBS += $(LIBS_GCC) ifneq ($(BOARD), spresense) LIBS += -lc @@ -49,7 +51,11 @@ ifeq ($(NO_LTO),1) CFLAGS := $(filter-out -flto,$(CFLAGS)) endif -LDFLAGS += $(CFLAGS) -Wl,-T,$(TOP)/$(LD_FILE) -Wl,[email protected] -Wl,-cref -Wl,-gc-sections +ifneq ($(LD_FILE),) +LDFLAGS_LD_FILE ?= -Wl,-T,$(TOP)/$(LD_FILE) +endif + +LDFLAGS += $(CFLAGS) $(LDFLAGS_LD_FILE) -Wl,[email protected] -Wl,-cref -Wl,-gc-sections ifneq ($(SKIP_NANOLIB), 1) LDFLAGS += -specs=nosys.specs -specs=nano.specs endif diff --git a/hw/bsp/board_mcu.h b/hw/bsp/board_mcu.h index f8b5c061c..b911e1e53 100644 --- a/hw/bsp/board_mcu.h +++ b/hw/bsp/board_mcu.h @@ -32,7 +32,7 @@ //--------------------------------------------------------------------+ // Low Level MCU header include. TinyUSB stack and example should be -// platform independent and mostly doens't need to include this file. +// platform independent and mostly doesn't need to include this file. // However there are still certain situation where this file is needed: // - FreeRTOSConfig.h to set up correct clock and NVIC interrupts for ARM Cortex // - SWO logging for Cortex M with ITM_SendChar() / ITM_ReceiveChar() @@ -146,6 +146,9 @@ #elif CFG_TUSB_MCU == OPT_MCU_TM4C123 #include "TM4C123.h" +#elif TU_CHECK_MCU(OPT_MCU_BCM2711, OPT_MCU_BCM2835, OPT_MCU_BCM2837) + // no header needed + #else #error "Missing MCU header" #endif diff --git a/hw/bsp/raspberrypi4/boards/raspberrypi_cm4/board.h b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h index 1d3565d5c..1d3565d5c 100644 --- a/hw/bsp/raspberrypi4/boards/raspberrypi_cm4/board.h +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk new file mode 100644 index 000000000..52e9e45c4 --- /dev/null +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk @@ -0,0 +1,5 @@ +CFLAGS += -mcpu=arm1176jzf-s \ + -DBCM_VERSION=2835 \ + -DCFG_TUSB_MCU=OPT_MCU_BCM2835 + +SUFFIX = diff --git a/hw/bsp/raspberrypi4/family.c b/hw/bsp/broadcom_32bit/family.c index ba0b2700a..f7a11fb49 100644 --- a/hw/bsp/raspberrypi4/family.c +++ b/hw/bsp/broadcom_32bit/family.c @@ -27,8 +27,9 @@ #include "bsp/board.h" #include "board.h" +#include "broadcom/cpu.h" +#include "broadcom/gpio.h" #include "broadcom/interrupts.h" -#include "broadcom/io.h" #include "broadcom/mmu.h" #include "broadcom/caches.h" #include "broadcom/vcmailbox.h" @@ -37,9 +38,8 @@ #define LED_PIN 18 #define LED_STATE_ON 1 -// Button -#define BUTTON_PIN 16 -#define BUTTON_STATE_ACTIVE 0 +// UART TX +#define UART_TX_PIN 14 //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler @@ -62,14 +62,26 @@ void board_init(void) init_caches(); // LED - gpio_initOutputPinWithPullNone(LED_PIN); + gpio_set_function(LED_PIN, GPIO_FUNCTION_OUTPUT); + gpio_set_pull(LED_PIN, BP_PULL_NONE); board_led_write(true); - // Button - // TODO - // Uart - uart_init(); + COMPLETE_MEMORY_READS; + AUX->ENABLES_b.UART_1 = true; + + UART1->IER = 0; + UART1->CNTL = 0; + UART1->LCR_b.DATA_SIZE = UART1_LCR_DATA_SIZE_MODE_8BIT; + UART1->MCR = 0; + UART1->IER = 0; + + uint32_t source_clock = vcmailbox_get_clock_rate_measured(VCMAILBOX_CLOCK_CORE); + UART1->BAUD = ((source_clock / (115200 * 8)) - 1); + UART1->CNTL |= UART1_CNTL_TX_ENABLE_Msk; + COMPLETE_MEMORY_READS; + + gpio_set_function(UART_TX_PIN, GPIO_FUNCTION_ALT5); // Turn on USB peripheral. vcmailbox_set_power_state(VCMAILBOX_DEVICE_USB_HCD, true); @@ -87,7 +99,7 @@ void board_init(void) void board_led_write(bool state) { - gpio_setPinOutputBool(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); + gpio_set_value(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); } uint32_t board_button_read(void) diff --git a/hw/bsp/broadcom_32bit/family.mk b/hw/bsp/broadcom_32bit/family.mk new file mode 100644 index 000000000..98744c5d0 --- /dev/null +++ b/hw/bsp/broadcom_32bit/family.mk @@ -0,0 +1,46 @@ +MCU_DIR = hw/mcu/broadcom +DEPS_SUBMODULES += $(MCU_DIR) + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -Wall \ + -O0 \ + -ffreestanding \ + -nostdlib \ + -nostartfiles \ + -mgeneral-regs-only \ + -fno-exceptions \ + -std=c17 + +CROSS_COMPILE = arm-none-eabi- + +# mcu driver cause following warnings +CFLAGS += -Wno-error=cast-qual + +SRC_C += \ + src/portable/synopsys/dwc2/dcd_dwc2.c \ + $(MCU_DIR)/broadcom/gen/interrupt_handlers.c \ + $(MCU_DIR)/broadcom/gpio.c \ + $(MCU_DIR)/broadcom/interrupts.c \ + $(MCU_DIR)/broadcom/mmu.c \ + $(MCU_DIR)/broadcom/caches.c \ + $(MCU_DIR)/broadcom/vcmailbox.c + +SKIP_NANOLIB = 1 + +LD_FILE = $(MCU_DIR)/broadcom/link$(SUFFIX).ld + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(MCU_DIR) + +SRC_S += $(MCU_DIR)/broadcom/boot$(SUFFIX).S + +$(BUILD)/kernel$(SUFFIX).img: $(BUILD)/$(PROJECT).elf + $(OBJCOPY) -O binary $^ $@ + +# Copy to kernel to netboot drive or SD card +# Change destinaation to fit your need +flash: $(BUILD)/kernel$(SUFFIX).img + @$(CP) $< /home/$(USER)/Documents/code/pi_tinyusb/boot_cpy diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h new file mode 100644 index 000000000..1d3565d5c --- /dev/null +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h @@ -0,0 +1,38 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.mk b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.mk new file mode 100644 index 000000000..5706b8318 --- /dev/null +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.mk @@ -0,0 +1,3 @@ +CFLAGS += -mcpu=cortex-a72 \ + -DBCM_VERSION=2711 \ + -DCFG_TUSB_MCU=OPT_MCU_BCM2711 diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h new file mode 100644 index 000000000..1d3565d5c --- /dev/null +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h @@ -0,0 +1,38 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.mk b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.mk new file mode 100644 index 000000000..3060b0571 --- /dev/null +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.mk @@ -0,0 +1,3 @@ +CFLAGS += -mcpu=cortex-a53 \ + -DBCM_VERSION=2837 \ + -DCFG_TUSB_MCU=OPT_MCU_BCM2837 diff --git a/hw/bsp/broadcom_64bit/family.c b/hw/bsp/broadcom_64bit/family.c new file mode 100644 index 000000000..f7a11fb49 --- /dev/null +++ b/hw/bsp/broadcom_64bit/family.c @@ -0,0 +1,156 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" +#include "board.h" + +#include "broadcom/cpu.h" +#include "broadcom/gpio.h" +#include "broadcom/interrupts.h" +#include "broadcom/mmu.h" +#include "broadcom/caches.h" +#include "broadcom/vcmailbox.h" + +// LED +#define LED_PIN 18 +#define LED_STATE_ON 1 + +// UART TX +#define UART_TX_PIN 14 + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ +void board_init(void) +{ + setup_mmu_flat_map(); + init_caches(); + + // LED + gpio_set_function(LED_PIN, GPIO_FUNCTION_OUTPUT); + gpio_set_pull(LED_PIN, BP_PULL_NONE); + board_led_write(true); + + // Uart + COMPLETE_MEMORY_READS; + AUX->ENABLES_b.UART_1 = true; + + UART1->IER = 0; + UART1->CNTL = 0; + UART1->LCR_b.DATA_SIZE = UART1_LCR_DATA_SIZE_MODE_8BIT; + UART1->MCR = 0; + UART1->IER = 0; + + uint32_t source_clock = vcmailbox_get_clock_rate_measured(VCMAILBOX_CLOCK_CORE); + UART1->BAUD = ((source_clock / (115200 * 8)) - 1); + UART1->CNTL |= UART1_CNTL_TX_ENABLE_Msk; + COMPLETE_MEMORY_READS; + + gpio_set_function(UART_TX_PIN, GPIO_FUNCTION_ALT5); + + // Turn on USB peripheral. + vcmailbox_set_power_state(VCMAILBOX_DEVICE_USB_HCD, true); + + // Timer 1/1024 second tick + SYSTMR->CS_b.M1 = 1; + SYSTMR->C1 = SYSTMR->CLO + 977; + BP_EnableIRQ(TIMER_1_IRQn); + + BP_SetPriority(USB_IRQn, 0x00); + BP_ClearPendingIRQ(USB_IRQn); + BP_EnableIRQ(USB_IRQn); + BP_EnableIRQs(); +} + +void board_led_write(bool state) +{ + gpio_set_value(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + for (int i = 0; i < len; i++) { + const char* cbuf = buf; + while (!UART1->STAT_b.TX_READY) {} + if (cbuf[i] == '\n') { + UART1->IO = '\r'; + while (!UART1->STAT_b.TX_READY) {} + } + UART1->IO = cbuf[i]; + } + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void TIMER_1_IRQHandler(void) +{ + system_ticks++; + SYSTMR->C1 += 977; + SYSTMR->CS_b.M1 = 1; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + // asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/hw/bsp/raspberrypi4/family.mk b/hw/bsp/broadcom_64bit/family.mk index c65070a71..723926734 100644 --- a/hw/bsp/raspberrypi4/family.mk +++ b/hw/bsp/broadcom_64bit/family.mk @@ -3,18 +3,16 @@ DEPS_SUBMODULES += $(MCU_DIR) include $(TOP)/$(BOARD_PATH)/board.mk -CC = clang - CFLAGS += \ - -mcpu=cortex-a72 \ -Wall \ -O0 \ -ffreestanding \ -nostdlib \ -nostartfiles \ - -std=c17 \ -mgeneral-regs-only \ - -DCFG_TUSB_MCU=OPT_MCU_BCM2711 + -std=c17 + +CROSS_COMPILE = aarch64-none-elf- # mcu driver cause following warnings CFLAGS += -Wno-error=cast-qual @@ -22,25 +20,22 @@ CFLAGS += -Wno-error=cast-qual SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ $(MCU_DIR)/broadcom/gen/interrupt_handlers.c \ + $(MCU_DIR)/broadcom/gpio.c \ $(MCU_DIR)/broadcom/interrupts.c \ - $(MCU_DIR)/broadcom/io.c \ $(MCU_DIR)/broadcom/mmu.c \ $(MCU_DIR)/broadcom/caches.c \ $(MCU_DIR)/broadcom/vcmailbox.c - -CROSS_COMPILE = aarch64-none-elf- - SKIP_NANOLIB = 1 -LD_FILE = $(MCU_DIR)/broadcom/link.ld +LD_FILE = $(MCU_DIR)/broadcom/link8.ld INC += \ $(TOP)/$(BOARD_PATH) \ $(TOP)/$(MCU_DIR) \ $(TOP)/lib/CMSIS_5/CMSIS/Core_A/Include -SRC_S += $(MCU_DIR)/broadcom/boot.S +SRC_S += $(MCU_DIR)/broadcom/boot8.S $(BUILD)/kernel8.img: $(BUILD)/$(PROJECT).elf $(OBJCOPY) -O binary $^ $@ @@ -48,4 +43,4 @@ $(BUILD)/kernel8.img: $(BUILD)/$(PROJECT).elf # Copy to kernel to netboot drive or SD card # Change destinaation to fit your need flash: $(BUILD)/kernel8.img - $(CP) $< /home/$(USER)/Documents/code/pi4_tinyusb/boot_cpy + @$(CP) $< /home/$(USER)/Documents/code/pi_tinyusb/boot_cpy diff --git a/hw/bsp/esp32s2/boards/esp32s2.c b/hw/bsp/esp32s2/boards/esp32s2.c index 358c0c803..a81181672 100644 --- a/hw/bsp/esp32s2/boards/esp32s2.c +++ b/hw/bsp/esp32s2/boards/esp32s2.c @@ -70,7 +70,7 @@ void board_init(void) #endif // Button - gpio_pad_select_gpio(BUTTON_PIN); + esp_rom_gpio_pad_select_gpio(BUTTON_PIN); gpio_set_direction(BUTTON_PIN, GPIO_MODE_INPUT); gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY); @@ -98,7 +98,12 @@ static void configure_pins(usb_hal_context_t *usb) esp_rom_gpio_connect_out_signal(iopin->pin, iopin->func, false, false); } else { esp_rom_gpio_connect_in_signal(iopin->pin, iopin->func, false); - if ((iopin->pin != GPIO_FUNC_IN_LOW) && (iopin->pin != GPIO_FUNC_IN_HIGH)) { +#if ESP_IDF_VERSION_MAJOR > 4 + if ((iopin->pin != GPIO_MATRIX_CONST_ZERO_INPUT) && (iopin->pin != GPIO_MATRIX_CONST_ONE_INPUT)) +#else + if ((iopin->pin != GPIO_FUNC_IN_LOW) && (iopin->pin != GPIO_FUNC_IN_HIGH)) +#endif + { gpio_ll_input_enable(&GPIO, iopin->pin); } } diff --git a/hw/bsp/esp32s3/boards/esp32s3.c b/hw/bsp/esp32s3/boards/esp32s3.c index 358c0c803..a81181672 100644 --- a/hw/bsp/esp32s3/boards/esp32s3.c +++ b/hw/bsp/esp32s3/boards/esp32s3.c @@ -70,7 +70,7 @@ void board_init(void) #endif // Button - gpio_pad_select_gpio(BUTTON_PIN); + esp_rom_gpio_pad_select_gpio(BUTTON_PIN); gpio_set_direction(BUTTON_PIN, GPIO_MODE_INPUT); gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY); @@ -98,7 +98,12 @@ static void configure_pins(usb_hal_context_t *usb) esp_rom_gpio_connect_out_signal(iopin->pin, iopin->func, false, false); } else { esp_rom_gpio_connect_in_signal(iopin->pin, iopin->func, false); - if ((iopin->pin != GPIO_FUNC_IN_LOW) && (iopin->pin != GPIO_FUNC_IN_HIGH)) { +#if ESP_IDF_VERSION_MAJOR > 4 + if ((iopin->pin != GPIO_MATRIX_CONST_ZERO_INPUT) && (iopin->pin != GPIO_MATRIX_CONST_ONE_INPUT)) +#else + if ((iopin->pin != GPIO_FUNC_IN_LOW) && (iopin->pin != GPIO_FUNC_IN_HIGH)) +#endif + { gpio_ll_input_enable(&GPIO, iopin->pin); } } diff --git a/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake b/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake index 60f7d19ca..8996ff9dc 100644 --- a/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake +++ b/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake @@ -1,16 +1,6 @@ # Apply board specific content here target_include_directories(${COMPONENT_LIB} PRIVATE .) -idf_build_get_property(idf_target IDF_TARGET) - -message(STATUS "Apply ${BOARD}(${idf_target}) specific options for component: ${COMPONENT_TARGET}") - -if(NOT ${idf_target} STREQUAL "esp32s3") - message(FATAL_ERROR "Incorrect target for board ${BOARD}: (${idf_target}), try to clean the build first." ) -endif() - -set(IDF_TARGET "esp32s3" FORCE) - target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S3" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" diff --git a/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.cmake b/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.cmake new file mode 100644 index 000000000..8996ff9dc --- /dev/null +++ b/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.cmake @@ -0,0 +1,7 @@ +# Apply board specific content here +target_include_directories(${COMPONENT_LIB} PRIVATE .) + +target_compile_options(${COMPONENT_TARGET} PUBLIC + "-DCFG_TUSB_MCU=OPT_MCU_ESP32S3" + "-DCFG_TUSB_OS=OPT_OS_FREERTOS" +)
\ No newline at end of file diff --git a/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h b/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h new file mode 100644 index 000000000..c7940c56e --- /dev/null +++ b/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h @@ -0,0 +1,43 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define NEOPIXEL_PIN 48 + +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.cmake b/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.cmake new file mode 100644 index 000000000..8996ff9dc --- /dev/null +++ b/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.cmake @@ -0,0 +1,7 @@ +# Apply board specific content here +target_include_directories(${COMPONENT_LIB} PRIVATE .) + +target_compile_options(${COMPONENT_TARGET} PUBLIC + "-DCFG_TUSB_MCU=OPT_MCU_ESP32S3" + "-DCFG_TUSB_OS=OPT_OS_FREERTOS" +)
\ No newline at end of file diff --git a/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h b/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h new file mode 100644 index 000000000..c7940c56e --- /dev/null +++ b/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h @@ -0,0 +1,43 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define NEOPIXEL_PIN 48 + +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld b/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld new file mode 100644 index 000000000..5420ffc00 --- /dev/null +++ b/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld @@ -0,0 +1,217 @@ +/* +** ################################################################### +** Processors: K32L2B31VFM0A +** K32L2B31VFT0A +** K32L2B31VLH0A +** K32L2B31VMP0A +** +** Compiler: GNU C Compiler +** Reference manual: K32L2B3xRM, Rev.0, July 2019 +** Version: rev. 1.0, 2019-07-30 +** Build: b190930 +** +** Abstract: +** Linker file for the GNU C Compiler +** +** Copyright 2016 Freescale Semiconductor, Inc. +** Copyright 2016-2019 NXP +** All rights reserved. +** +** SPDX-License-Identifier: BSD-3-Clause +** +** http: www.nxp.com +** mail: [email protected] +** +** ################################################################### +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +HEAP_SIZE = DEFINED(__heap_size__) ? __heap_size__ : 0x0400; +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0400; + +/* Specify the memory areas */ +MEMORY +{ + m_interrupts (RX) : ORIGIN = 0x00008000, LENGTH = 0x00000200 + m_flash_config (RX) : ORIGIN = 0x00008400, LENGTH = 0x00000010 + m_text (RX) : ORIGIN = 0x00008410, LENGTH = 0x00037BF0 + m_data (RW) : ORIGIN = 0x1FFFE000, LENGTH = 0x00008000 +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into internal flash */ + .interrupts : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } > m_interrupts + + .flash_config : + { + . = ALIGN(4); + KEEP(*(.FlashConfig)) /* Flash Configuration Field (FCF) */ + . = ALIGN(4); + } > m_flash_config + + /* The program code and other data goes into internal flash */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + KEEP (*(.init)) + KEEP (*(.fini)) + . = ALIGN(4); + } > m_text + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > m_text + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } > m_text + + .ctors : + { + __CTOR_LIST__ = .; + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*crtbegin?.o(.ctors)) + /* We don't want to include the .ctor section from + from the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + __CTOR_END__ = .; + } > m_text + + .dtors : + { + __DTOR_LIST__ = .; + KEEP (*crtbegin.o(.dtors)) + KEEP (*crtbegin?.o(.dtors)) + KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + __DTOR_END__ = .; + } > m_text + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } > m_text + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } > m_text + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } > m_text + + __etext = .; /* define a global symbol at end of code */ + __DATA_ROM = .; /* Symbol is used by startup for data initialization */ + + /* reserve MTB memory at the beginning of m_data */ + .mtb : /* MTB buffer address as defined by the hardware */ + { + . = ALIGN(8); + _mtb_start = .; + KEEP(*(.mtb_buf)) /* need to KEEP Micro Trace Buffer as not referenced by application */ + . = ALIGN(8); + _mtb_end = .; + } > m_data + + .data : AT(__DATA_ROM) + { + . = ALIGN(4); + __DATA_RAM = .; + __data_start__ = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + KEEP(*(.jcr*)) + . = ALIGN(4); + __data_end__ = .; /* define a global symbol at data end */ + } > m_data + + __DATA_END = __DATA_ROM + (__data_end__ - __data_start__); + text_end = ORIGIN(m_text) + LENGTH(m_text); + ASSERT(__DATA_END <= text_end, "region m_text overflowed with text and data") + + /* Uninitialized data section */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + . = ALIGN(4); + __START_BSS = .; + __bss_start__ = .; + *(.bss) + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + __END_BSS = .; + } > m_data + + .heap : + { + . = ALIGN(8); + __end__ = .; + PROVIDE(end = .); + __HeapBase = .; + . += HEAP_SIZE; + __HeapLimit = .; + __heap_limit = .; /* Add for _sbrk */ + } > m_data + + .stack : + { + . = ALIGN(8); + . += STACK_SIZE; + } > m_data + + /* Initializes stack on the end of block */ + __StackTop = ORIGIN(m_data) + LENGTH(m_data); + __StackLimit = __StackTop - STACK_SIZE; + PROVIDE(__stack = __StackTop); + + .ARM.attributes 0 : { *(.ARM.attributes) } + + ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap") +} + diff --git a/hw/bsp/kuiic/board.h b/hw/bsp/kuiic/board.h new file mode 100644 index 000000000..78ad83a2e --- /dev/null +++ b/hw/bsp/kuiic/board.h @@ -0,0 +1,45 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "fsl_device_registers.h" + +// LED +#define LED_PIN_CLOCK kCLOCK_PortA +#define LED_GPIO GPIOA +#define LED_PORT PORTA +#define LED_PIN 2 +#define LED_STATE_ON 1 + +// UART +#define UART_PORT LPUART1 +#define UART_PIN_RX 3u +#define UART_PIN_TX 0u + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/kuiic/board.mk b/hw/bsp/kuiic/board.mk new file mode 100644 index 000000000..39e9d9deb --- /dev/null +++ b/hw/bsp/kuiic/board.mk @@ -0,0 +1,52 @@ +SDK_DIR = hw/mcu/nxp/mcux-sdk +DEPS_SUBMODULES += $(SDK_DIR) tools/uf2 + +# This board uses TinyUF2 for updates +UF2_FAMILY_ID = 0x7f83e793 + +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0plus \ + -DCPU_K32L2B31VLH0A \ + -DCFG_TUSB_MCU=OPT_MCU_K32L2BXX + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter + +MCU_DIR = $(SDK_DIR)/devices/K32L2B31A + +# All source paths should be relative to the top level. +LD_FILE = /hw/bsp/$(BOARD)/K32L2B31xxxxA_flash.ld + +SRC_C += \ + src/portable/nxp/khci/dcd_khci.c \ + $(MCU_DIR)/system_K32L2B31A.c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(SDK_DIR)/drivers/gpio/fsl_gpio.c \ + $(SDK_DIR)/drivers/lpuart/fsl_lpuart.c + +INC += \ + $(TOP)/hw/bsp/$(BOARD) \ + $(TOP)/$(SDK_DIR)/CMSIS/Include \ + $(TOP)/$(SDK_DIR)/drivers/smc \ + $(TOP)/$(SDK_DIR)/drivers/common \ + $(TOP)/$(SDK_DIR)/drivers/gpio \ + $(TOP)/$(SDK_DIR)/drivers/port \ + $(TOP)/$(SDK_DIR)/drivers/lpuart \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/drivers + +SRC_S += $(MCU_DIR)/gcc/startup_K32L2B31A.S + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = MKL25Z128xxx4 + +# For flash-pyocd target +PYOCD_TARGET = K32L2B + +# flash using pyocd +flash: flash-pyocd diff --git a/hw/bsp/kuiic/kuiic.c b/hw/bsp/kuiic/kuiic.c new file mode 100644 index 000000000..737ef3f5c --- /dev/null +++ b/hw/bsp/kuiic/kuiic.c @@ -0,0 +1,203 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * Copyright (c) 2020, Koji Kitayama + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" +#include "board.h" +#include "fsl_smc.h" +#include "fsl_gpio.h" +#include "fsl_port.h" +#include "fsl_clock.h" +#include "fsl_lpuart.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define SIM_OSC32KSEL_LPO_CLK 3U /*!< OSC32KSEL select: LPO clock */ +#define SOPT5_LPUART1RXSRC_LPUART_RX 0x00u /*!<@brief LPUART1 Receive Data Source Select: LPUART_RX pin */ +#define SOPT5_LPUART1TXSRC_LPUART_TX 0x00u /*!<@brief LPUART1 Transmit Data Source Select: LPUART_TX pin */ +#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 48000000U /*!< Core clock frequency: 48000000Hz */ + +/******************************************************************************* + * Variables + ******************************************************************************/ +/* System clock frequency. */ +extern uint32_t SystemCoreClock; + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ +const mcglite_config_t mcgliteConfig_BOARD_BootClockRUN = { + .outSrc = kMCGLITE_ClkSrcHirc, /* MCGOUTCLK source is HIRC */ + .irclkEnableMode = kMCGLITE_IrclkEnable, /* MCGIRCLK enabled, MCGIRCLK disabled in STOP mode */ + .ircs = kMCGLITE_Lirc8M, /* Slow internal reference (LIRC) 8 MHz clock selected */ + .fcrdiv = kMCGLITE_LircDivBy1, /* Low-frequency Internal Reference Clock Divider: divided by 1 */ + .lircDiv2 = kMCGLITE_LircDivBy1, /* Second Low-frequency Internal Reference Clock Divider: divided by 1 */ + .hircEnableInNotHircMode = true, /* HIRC source is enabled */ +}; +const sim_clock_config_t simConfig_BOARD_BootClockRUN = { + .er32kSrc = SIM_OSC32KSEL_LPO_CLK, /* OSC32KSEL select: LPO clock */ + .clkdiv1 = 0x10000U, /* SIM_CLKDIV1 - OUTDIV1: /1, OUTDIV4: /2 */ +}; + +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + /* Set the system clock dividers in SIM to safe value. */ + CLOCK_SetSimSafeDivs(); + /* Set MCG to HIRC mode. */ + CLOCK_SetMcgliteConfig(&mcgliteConfig_BOARD_BootClockRUN); + /* Set the clock configuration in SIM module. */ + CLOCK_SetSimConfig(&simConfig_BOARD_BootClockRUN); + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; +} + + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + tud_int_handler(0); +} + +void board_init(void) +{ + /* Enable port clocks for GPIO pins */ + CLOCK_EnableClock(kCLOCK_PortA); + CLOCK_EnableClock(kCLOCK_PortB); + CLOCK_EnableClock(kCLOCK_PortC); + CLOCK_EnableClock(kCLOCK_PortD); + CLOCK_EnableClock(kCLOCK_PortE); + + + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 1 }; + GPIO_PinInit(GPIOA, 1U, &led_config); + PORT_SetPinMux(PORTA, 1U, kPORT_MuxAsGpio); + led_config.outputLogic = 0; + GPIO_PinInit(GPIOA, 2U, &led_config); + PORT_SetPinMux(PORTA, 2U, kPORT_MuxAsGpio); + +#ifdef BUTTON_PIN + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; + GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); + const port_pin_config_t BUTTON_CFG = { + kPORT_PullUp, + kPORT_FastSlewRate, + kPORT_PassiveFilterDisable, + kPORT_LowDriveStrength, + kPORT_MuxAsGpio + }; + PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); +#endif + + /* PORTC3 is configured as LPUART0_RX */ + PORT_SetPinMux(PORTC, 3U, kPORT_MuxAlt3); + /* PORTA2 (pin 24) is configured as LPUART0_TX */ + PORT_SetPinMux(PORTE, 0U, kPORT_MuxAlt3); + + SIM->SOPT5 = ((SIM->SOPT5 & + /* Mask bits to zero which are setting */ + (~(SIM_SOPT5_LPUART1TXSRC_MASK | SIM_SOPT5_LPUART1RXSRC_MASK))) + /* LPUART0 Transmit Data Source Select: LPUART0_TX pin. */ + | SIM_SOPT5_LPUART1TXSRC(SOPT5_LPUART1TXSRC_LPUART_TX) + /* LPUART0 Receive Data Source Select: LPUART_RX pin. */ + | SIM_SOPT5_LPUART1RXSRC(SOPT5_LPUART1RXSRC_LPUART_RX)); + + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + CLOCK_SetLpuart1Clock(1); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + lpuart_config_t uart_config; + LPUART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPUART_Init(UART_PORT, &uart_config, CLOCK_GetFreq(kCLOCK_McgIrc48MClk)); + + // USB + CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcIrc48M, 48000000U); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + if (state) { + LED_GPIO->PDDR |= GPIO_FIT_REG((1UL << LED_PIN)); + } else { + LED_GPIO->PDDR &= GPIO_FIT_REG(~(1UL << LED_PIN)); + } +// GPIO_PinWrite(GPIOA, 1, state ? LED_STATE_ON : (1-LED_STATE_ON) ); +// GPIO_PinWrite(GPIOA, 2, state ? (1-LED_STATE_ON) : LED_STATE_ON ); +} + +uint32_t board_button_read(void) +{ +#ifdef BUTTON_PIN + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN); +#else + return 0; +#endif +} + +int board_uart_read(uint8_t* buf, int len) +{ + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; +} + +int board_uart_write(void const * buf, int len) +{ + LPUART_WriteBlocking(UART_PORT, (uint8_t const*) buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/pic32mz/boards/olimex_emz64/board.mk b/hw/bsp/pic32mz/boards/olimex_emz64/board.mk new file mode 100644 index 000000000..3df5ed92b --- /dev/null +++ b/hw/bsp/pic32mz/boards/olimex_emz64/board.mk @@ -0,0 +1,5 @@ +JLINK_DEVICE=PIC32MZ2048EFH064 +JLINK_IF=ICSP + +CFLAGS += \ + -mprocessor=32MZ2048EFH064 \ diff --git a/hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c b/hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c new file mode 100644 index 000000000..0f6dc37e2 --- /dev/null +++ b/hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c @@ -0,0 +1,144 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2022 Jerzy Kasenberg + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include <stdint.h> +#include <stdbool.h> +#include <xc.h> +#include "tusb.h" + +/* JTAG on, WDT off */ +#pragma config FDMTEN=0, FSOSCEN=0, DMTCNT=1 +#pragma config DEBUG=ON +#pragma config JTAGEN=ON +#pragma config FSLEEP=OFF +#pragma config TRCEN=OFF +#pragma config ICESEL=ICS_PGx2 + +#pragma config POSCMOD = EC +#pragma config FNOSC = SPLL +/* 24MHz posc input to pll, div by 3, multiply by 50, div by 2 -> 200mhz*/ +#pragma config FPLLICLK=0, FPLLIDIV=DIV_3, FPLLRNG=RANGE_5_10_MHZ, FPLLMULT=MUL_50, FPLLODIV=DIV_2 +#pragma config FUSBIDIO=1 +#pragma config WINDIS=NORMAL +#pragma config WDTSPGM=1 +#pragma config WDTPS=15 +#pragma config FWDTEN=OFF + +void button_init(void) +{ + // RB12 - button + // ANSELB B12 not analog + ANSELBCLR = TU_BIT(12); + // TRISB B12 input + TRISBSET = TU_BIT(12); + // Pull-up + CNPUBSET = TU_BIT(12); +} + +void led_init(void) +{ + // RB8 - LED + // ANASELB RB8 not analog + ANSELBCLR = TU_BIT(8); + // TRISH RH2 input + TRISBCLR = TU_BIT(8); + // Initial value 0, LED off + LATBCLR = TU_BIT(8); +} + +void uart_init(void) +{ + // RD4/RD0 Uart4 TX/RX + // ANSELD - not present on 64 pin device + + /* Unlock system for PPS configuration */ + SYSKEY = 0x00000000; + SYSKEY = 0xAA996655; + SYSKEY = 0x556699AA; + CFGCONbits.IOLOCK = 0; + + // PPS Input Remapping + // U4RX -> RD0 + U4RXR = 3; + + // PPS Output Remapping + // RD4 -> U4TX + RPD4R = 2; + + // Lock back the system after PPS configuration + CFGCONbits.IOLOCK = 1; + SYSKEY = 0x00000000; + + // UART4 + // High speed mode + // 8 bits, no parity, no RTS/CTS, no flow control + U4MODE = 0x0; + + // Enable UART2 Receiver and Transmitter + U4STASET = (_U4STA_UTXEN_MASK | _U4STA_URXEN_MASK | _U4STA_UTXISEL1_MASK); + + // BAUD Rate register Setup + U4BRG = 100000000 / (16 * 115200) + 1; + + // Disable Interrupts + IEC4CLR = _IEC5_U4EIE_MASK | _IEC5_U4RXIE_MASK | _IEC5_U4TXIE_MASK; + + // Turn ON UART2 + U4MODESET = _U4MODE_ON_MASK; +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + if (state) + { + LATBSET = TU_BIT(8); + } + else + { + LATBCLR = TU_BIT(8); + } +} + +uint32_t board_button_read(void) +{ + return (PORTB >> 12) & 1; +} + +int board_uart_write(void const * buf, int len) +{ + int i = len; + uint8_t const * data = buf; + while (i--) + { + while (U4STAbits.UTXBF) ; + U4TXREG = *data++; + } + return len; +} diff --git a/hw/bsp/pic32mz/boards/olimex_hmz144/board.mk b/hw/bsp/pic32mz/boards/olimex_hmz144/board.mk new file mode 100644 index 000000000..a43b62d32 --- /dev/null +++ b/hw/bsp/pic32mz/boards/olimex_hmz144/board.mk @@ -0,0 +1,5 @@ +JLINK_DEVICE=PIC32MZ2048EFM144 +JLINK_IF=ICSP + +CFLAGS += \ + -mprocessor=32MZ2048EFM144 \ diff --git a/hw/bsp/pic32mz/boards/olimex_hmz144/olimex_hmz144.c b/hw/bsp/pic32mz/boards/olimex_hmz144/olimex_hmz144.c new file mode 100644 index 000000000..4ecbe75a1 --- /dev/null +++ b/hw/bsp/pic32mz/boards/olimex_hmz144/olimex_hmz144.c @@ -0,0 +1,142 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2022 Jerzy Kasenberg + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include <stdint.h> +#include <stdbool.h> +#include <xc.h> +#include "tusb.h" + +/* JTAG on, WDT off */ +#pragma config FDMTEN=0, FSOSCEN=0, DMTCNT=1 +#pragma config DEBUG=ON +#pragma config JTAGEN=ON +#pragma config FSLEEP=OFF +#pragma config TRCEN=OFF +#pragma config ICESEL=ICS_PGx2 + +#pragma config POSCMOD = HS +#pragma config FNOSC = SPLL +/* 24MHz posc input to pll, div by 3, multiply by 50, div by 2 -> 200mhz*/ +#pragma config FPLLICLK=0, FPLLIDIV=DIV_3, FPLLRNG=RANGE_5_10_MHZ, FPLLMULT=MUL_50, FPLLODIV=DIV_2 +#pragma config FUSBIDIO=1 +#pragma config WINDIS=NORMAL +#pragma config WDTSPGM=1 +#pragma config WDTPS=15 +#pragma config FWDTEN=OFF + +void button_init(void) +{ + // RB12 - button + // ANSELB B12 not analog + ANSELBCLR = TU_BIT(12); + // TRISB B12 input + TRISBSET = TU_BIT(12); +} + +void led_init(void) +{ + // RH2 - LED + // ANASELH no analog function on RH2 + // TRISH RH2 input + TRISHCLR = TU_BIT(2); + // Initial value 0, LED off + LATHCLR = TU_BIT(2); +} + +void uart_init(void) +{ + // RE8/RE9 Uart2 TX/RX + // ANSELE - TX/RX not analog + ANSELECLR = TU_BIT(8) | TU_BIT(9); + + /* Unlock system for PPS configuration */ + SYSKEY = 0x00000000; + SYSKEY = 0xAA996655; + SYSKEY = 0x556699AA; + CFGCONbits.IOLOCK = 0; + + // PPS Input Remapping + // U2RX -> RE9 + U2RXR = 13; + + // PPS Output Remapping + // RE8 -> U2TX + RPE8R = 2; + + // Lock back the system after PPS configuration + CFGCONbits.IOLOCK = 1; + SYSKEY = 0x00000000; + + // UART2 + // High speed mode + // 8 bits, no parity, no RTS/CTS, no flow control + U2MODE = 0x0; + + // Enable UART2 Receiver and Transmitter + U2STASET = (_U2STA_UTXEN_MASK | _U2STA_URXEN_MASK | _U2STA_UTXISEL1_MASK); + + // BAUD Rate register Setup + U2BRG = 100000000 / (16 * 115200) + 1; + + // Disable Interrupts + IEC4CLR = _IEC4_U2EIE_MASK | _IEC4_U2RXIE_MASK | _IEC4_U2TXIE_MASK; + + // Turn ON UART2 + U2MODESET = _U2MODE_ON_MASK; +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + if (state) + { + LATHSET = TU_BIT(2); + } + else + { + LATHCLR = TU_BIT(2); + } +} + +uint32_t board_button_read(void) +{ + return (PORTB >> 12) & 1; +} + +int board_uart_write(void const * buf, int len) +{ + int i = len; + uint8_t const * data = buf; + while (i--) + { + while (U2STAbits.UTXBF) ; + U2TXREG = *data++; + } + return len; +} diff --git a/hw/bsp/pic32mz/family.c b/hw/bsp/pic32mz/family.c new file mode 100644 index 000000000..786f04978 --- /dev/null +++ b/hw/bsp/pic32mz/family.c @@ -0,0 +1,110 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2022 Jerzy Kasenberg + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include <stdint.h> +#include <stdbool.h> +#include <xc.h> +#include "tusb.h" + +void __attribute__((interrupt(IPL2AUTO), vector(_USB_VECTOR), no_fpu)) +USBD_IRQHandler(void) +{ + IFS4CLR = _IFS4_USBIF_MASK; + tud_int_handler(0); +} + +TU_ATTR_WEAK void button_init(void) +{ +} + +TU_ATTR_WEAK void led_init(void) +{ +} + +TU_ATTR_WEAK void uart_init(void) +{ +} + +void board_init(void) +{ + button_init(); + led_init(); + uart_init(); + + // Force device mode by overriding USB ID and settings it to 1 + USBCRCONbits.PHYIDEN = 0; + USBCRCONbits.USBIDVAL = 1; + USBCRCONbits.USBIDOVEN = 1; + + // set interrupt priority (must much IPL2AUTO) + IPC33CLR = _IPC33_USBIP_MASK; + IPC33SET = (2 << _IPC33_USBIP_POSITION); + // set interrupt subpriority + IPC33CLR = _IPC33_USBIS_MASK; + IPC33SET = (0 << _IPC33_USBIS_POSITION); + + USBCRCONbits.USBIE = 0; + IFS4CLR = _IFS4_USBIF_MASK; + IEC4SET = _IEC4_USBIE_MASK; + + __builtin_enable_interrupts(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +TU_ATTR_WEAK void board_led_write(bool state) +{ + (void) state; +} + +TU_ATTR_WEAK uint32_t board_button_read(void) +{ + return 0; +} + +TU_ATTR_WEAK int board_uart_read(uint8_t * buf, int len) +{ + (void) buf; + (void) len; + + return 0; +} + +TU_ATTR_WEAK int board_uart_write(void const * buf, int len) +{ + (void) buf; + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +uint32_t board_millis(void) +{ + // COUNTER is system clock (200MHz / 2 = 100MHz) convert to ms) + return _CP0_GET_COUNT() / (100000000 / 1000); +} +#endif diff --git a/hw/bsp/pic32mz/family.mk b/hw/bsp/pic32mz/family.mk new file mode 100644 index 000000000..48e08689f --- /dev/null +++ b/hw/bsp/pic32mz/family.mk @@ -0,0 +1,20 @@ +CROSS_COMPILE = xc32- +CFLAGS_OPTIMIZED = -O2 +LIBS_GCC = -lgcc -lm +SKIP_NANOLIB = 1 + +CFLAGS = \ + -std=c99 \ + -DCFG_TUSB_MCU=OPT_MCU_PIC32MZ + +include $(TOP)/$(BOARD_PATH)/board.mk + +SRC_C += \ + src/portable/microchip/pic32mz/dcd_pic32mz.c \ + +INC += \ + $(TOP)/hw/mcu/microchip/pic32mz \ + $(TOP)/$(BOARD_PATH) \ + +# flash target using jlink +flash: flash-jlink diff --git a/hw/bsp/raspberrypi4/boards/raspberrypi_cm4/board.mk b/hw/bsp/raspberrypi4/boards/raspberrypi_cm4/board.mk deleted file mode 100644 index 897342479..000000000 --- a/hw/bsp/raspberrypi4/boards/raspberrypi_cm4/board.mk +++ /dev/null @@ -1 +0,0 @@ -CFLAGS += -DBCM_VERSION=2711 diff --git a/hw/bsp/samd21/boards/curiosity_nano/.skip.device.net_lwip_webserver b/hw/bsp/samd21/boards/curiosity_nano/.skip.device.net_lwip_webserver deleted file mode 100644 index e69de29bb..000000000 --- a/hw/bsp/samd21/boards/curiosity_nano/.skip.device.net_lwip_webserver +++ /dev/null diff --git a/hw/bsp/samd21/family.c b/hw/bsp/samd21/family.c index cead582e9..494dc393a 100644 --- a/hw/bsp/samd21/family.c +++ b/hw/bsp/samd21/family.c @@ -47,7 +47,7 @@ void USB_Handler(void) //--------------------------------------------------------------------+ // UART support //--------------------------------------------------------------------+ -void uart_init(void); +static void uart_init(void); //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM DECLARATION @@ -152,7 +152,7 @@ uint32_t board_button_read(void) #define BOARD_SERCOM2(n) SERCOM ## n #define BOARD_SERCOM(n) BOARD_SERCOM2(n) -void uart_init(void) +static void uart_init(void) { #if UART_SERCOM == 0 gpio_set_pin_function(PIN_PA06, PINMUX_PA06D_SERCOM0_PAD2); @@ -217,7 +217,7 @@ int board_uart_write(void const * buf, int len) } #else // ! defined(UART_SERCOM) -void uart_init(void) +static void uart_init(void) { } diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/STM32F439ZITX_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f439nucleo/STM32F439ZITX_FLASH.ld new file mode 100644 index 000000000..2dc277c77 --- /dev/null +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/STM32F439ZITX_FLASH.ld @@ -0,0 +1,206 @@ +/* +****************************************************************************** +** +** @file : LinkerScript.ld +** +** @author : Auto-generated by STM32CubeIDE +** +** Abstract : Linker script for NUCLEO-F439ZI Board embedding STM32F439ZITx Device from stm32f4 series +** 2048Kbytes FLASH +** 64Kbytes CCMRAM +** 192Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +****************************************************************************** +** @attention +** +** Copyright (c) 2021 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +****************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + CCMRAM (xrw) : ORIGIN = 0x10000000, LENGTH = 64K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 192K + FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + _siccmram = LOADADDR(.ccmram); + + /* CCM-RAM section + * + * IMPORTANT NOTE! + * If initialized variables will be placed in this section, + * the startup code needs to be modified to copy the init-values. + */ + .ccmram : + { + . = ALIGN(4); + _sccmram = .; /* create a global symbol at ccmram start */ + *(.ccmram) + *(.ccmram*) + + . = ALIGN(4); + _eccmram = .; /* create a global symbol at ccmram end */ + } >CCMRAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h new file mode 100644 index 000000000..e5a822426 --- /dev/null +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h @@ -0,0 +1,108 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_14 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + +// UART Enable for STLink VCOM +#define UART_DEV USART3 +#define UART_GPIO_PORT GPIOD +#define UART_GPIO_AF GPIO_AF7_USART3 +#define UART_TX_PIN GPIO_PIN_8 +#define UART_RX_PIN GPIO_PIN_9 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the + * device is clocked below the maximum system frequency, to update the + * voltage scaling value regarding system frequency refer to product + * datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 336; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 7; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + * clocks dividers */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | + RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); + + // Enable clocks for LED, Button, Uart + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_USART3_CLK_ENABLE(); +} + +static inline void board_vbus_sense_init(void) +{ + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.mk b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.mk new file mode 100644 index 000000000..b7b36a8a6 --- /dev/null +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DSTM32F439xx + +LD_FILE = $(BOARD_PATH)/STM32F439ZITX_FLASH.ld + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f439xx.s + +# For flash-jlink target +JLINK_DEVICE = stm32f439zi + +# flash target using on-board stlink +flash: flash-stlink diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h new file mode 100644 index 000000000..a2c11d717 --- /dev/null +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h @@ -0,0 +1,486 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf_template.h + * @author MCD Application Team + * @brief HAL configuration file + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +// #define HAL_SPI_MODULE_ENABLED +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_FMPI2C_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* LAN8742A_PHY_ADDRESS Address*/ +#define LAN8742A_PHY_ADDRESS 0U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY 0x000000FFU +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY 0x00000FFFU + +#define PHY_READ_TO 0x0000FFFFU +#define PHY_WRITE_TO 0x0000FFFFU + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00U) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01U) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ +#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ + +#define PHY_ISFR ((uint16_t)0x001DU) /*!< PHY Interrupt Source Flag register Offset */ +#define PHY_ISFR_INT4 ((uint16_t)0x000BU) /*!< PHY Link down inturrupt */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f4xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f4xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_FMPI2C_MODULE_ENABLED + #include "stm32f4xx_hal_fmpi2c.h" +#endif /* HAL_FMPI2C_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f4xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.h b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.h index fd9d50183..eab0bd5f0 100644 --- a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.h +++ b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.h @@ -32,8 +32,8 @@ #endif // G474RE Nucleo does not has usb connection. We need to manually connect -// - PA11 for D+, CN10.14 -// - PA12 for D-, CN10.12 +// - PA12 for D+, CN10.12 +// - PA11 for D-, CN10.14 // LED #define LED_PORT GPIOA @@ -61,32 +61,36 @@ static inline void board_clock_init(void) { RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; // Configure the main internal regulator output voltage HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST); // Initializes the CPU, AHB and APB busses clocks - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; - RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; - RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV4; - RCC_OscInitStruct.PLL.PLLN = 85; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; - RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV4; + RCC_OscInitStruct.PLL.PLLN = 50; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; + RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; HAL_RCC_OscConfig(&RCC_OscInitStruct); // Initializes the CPU, AHB and APB busses clocks - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_8); + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) ; + #if 0 // TODO need to check if USB clock is enabled /* Enable HSI48 */ memset(&RCC_OscInitStruct, 0, sizeof(RCC_OscInitStruct)); diff --git a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.mk b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.mk index 1951fcba0..e41edd3b7 100644 --- a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.mk +++ b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.mk @@ -1,4 +1,6 @@ -CFLAGS += -DSTM32G474xx +CFLAGS += \ + -DSTM32G474xx \ + -DHSE_VALUE=24000000 LD_FILE = $(BOARD_PATH)/STM32G474RETx_FLASH.ld diff --git a/hw/bsp/stm32g4/family.c b/hw/bsp/stm32g4/family.c index 318f50746..461dc61a1 100644 --- a/hw/bsp/stm32g4/family.c +++ b/hw/bsp/stm32g4/family.c @@ -118,13 +118,13 @@ void board_init(void) // USB Pins TODO double check USB clock and pin setup // Configure USB DM and DP pins. This is optional, and maintained only for user guidance. -// GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); -// GPIO_InitStruct.Mode = GPIO_MODE_INPUT; -// GPIO_InitStruct.Pull = GPIO_NOPULL; -// GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; -// HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); -// -// __HAL_RCC_USB_CLK_ENABLE(); + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + __HAL_RCC_USB_CLK_ENABLE(); board_vbus_sense_init(); } diff --git a/hw/mcu/broadcom b/hw/mcu/broadcom -Subproject 5bff1d5e02c37c38ee1e5cf3f7fe82fdc7e1517 +Subproject 08370086080759ed54ac1136d62d2ad24c6fa26 diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index d9f2e284e..d21980060 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -2247,24 +2247,28 @@ static void audiod_parse_for_AS_params(audiod_function_t* audio, uint8_t const * #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP -// Input value feedback has to be in 16.16 format - the format will be converted according to speed settings automatically bool tud_audio_n_fb_set(uint8_t func_id, uint32_t feedback) { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); // Format the feedback value -#if !TUD_OPT_HIGH_SPEED - uint8_t * fb = (uint8_t *) &_audiod_fct[func_id].fb_val; +#if CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION + if ( TUSB_SPEED_FULL == tud_speed_get() ) + { + uint8_t * fb = (uint8_t *) &_audiod_fct[func_id].fb_val; - // For FS format is 10.14 - *(fb++) = (feedback >> 2) & 0xFF; - *(fb++) = (feedback >> 10) & 0xFF; - *(fb++) = (feedback >> 18) & 0xFF; - // 4th byte is needed to work correctly with MS Windows - *fb = 0; + // For FS format is 10.14 + *(fb++) = (feedback >> 2) & 0xFF; + *(fb++) = (feedback >> 10) & 0xFF; + *(fb++) = (feedback >> 18) & 0xFF; + // 4th byte is needed to work correctly with MS Windows + *fb = 0; + }else #else - // For HS format is 16.16 as originally demanded - _audiod_fct[func_id].fb_val = feedback; + { + // Send value as-is, caller will choose the appropriate format + _audiod_fct[func_id].fb_val = feedback; + } #endif // Schedule a transmit with the new value if EP is not busy - this triggers repetitive scheduling of the feedback value diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index 5a469523c..f406cf281 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -186,6 +186,11 @@ #define CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP 0 // Feedback - 0 or 1 #endif +// Enable/disable conversion from 16.16 to 10.14 format on full-speed devices. See tud_audio_n_fb_set(). +#ifndef CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION +#define CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION 0 // 0 or 1 +#endif + // Audio interrupt control EP size - disabled if 0 #ifndef CFG_TUD_AUDIO_INT_CTR_EPSIZE_IN #define CFG_TUD_AUDIO_INT_CTR_EPSIZE_IN 0 // Audio interrupt control - if required - 6 Bytes according to UAC 2 specification (p. 74) @@ -454,10 +459,15 @@ TU_ATTR_WEAK bool tud_audio_rx_done_post_read_cb(uint8_t rhport, uint16_t n_byte #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP TU_ATTR_WEAK bool tud_audio_fb_done_cb(uint8_t rhport); -// User code should call this function with feedback value in 16.16 format for FS and HS. -// Value will be corrected for FS to 10.14 format automatically. -// (see Universal Serial Bus Specification Revision 2.0 5.12.4.2). -// Feedback value will be sent at FB endpoint interval till it's changed. + +// This function is used to provide data rate feedback from an asynchronous sink. Feedback value will be sent at FB endpoint interval till it's changed. +// +// The feedback format is specified to be 16.16 for HS and 10.14 for FS devices (see Universal Serial Bus Specification Revision 2.0 5.12.4.2). By default, +// the choice of format is left to the caller and feedback argument is sent as-is. If CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION is set, then tinyusb +// expects 16.16 format and handles the conversion to 10.14 on FS. +// +// Note that due to a bug in its USB Audio 2.0 driver, Windows currently requires 16.16 format for _all_ USB 2.0 devices. On Linux and macOS it seems the +// driver can work with either format. So a good compromise is to keep format correction disabled and stick to 16.16 format. bool tud_audio_n_fb_set(uint8_t func_id, uint32_t feedback); static inline bool tud_audio_fb_set(uint32_t feedback); #endif diff --git a/src/class/usbtmc/usbtmc_device.c b/src/class/usbtmc/usbtmc_device.c index 4bd1edf12..26be987cf 100644 --- a/src/class/usbtmc/usbtmc_device.c +++ b/src/class/usbtmc/usbtmc_device.c @@ -235,17 +235,19 @@ void usbtmcd_init_cb(void) usbtmc_state.capabilities = tud_usbtmc_get_capabilities_cb(); #ifndef NDEBUG # if CFG_TUD_USBTMC_ENABLE_488 - if(usbtmc_state.capabilities->bmIntfcCapabilities488.supportsTrigger) - TU_ASSERT(&tud_usbtmc_msg_trigger_cb != NULL,); - // Per USB488 spec: table 8 - TU_ASSERT(!usbtmc_state.capabilities->bmIntfcCapabilities.listenOnly,); - TU_ASSERT(!usbtmc_state.capabilities->bmIntfcCapabilities.talkOnly,); + if (usbtmc_state.capabilities->bmIntfcCapabilities488.supportsTrigger) { + TU_ASSERT(&tud_usbtmc_msg_trigger_cb != NULL,); + } + // Per USB488 spec: table 8 + TU_ASSERT(!usbtmc_state.capabilities->bmIntfcCapabilities.listenOnly,); + TU_ASSERT(!usbtmc_state.capabilities->bmIntfcCapabilities.talkOnly,); # endif - if(usbtmc_state.capabilities->bmIntfcCapabilities.supportsIndicatorPulse) - TU_ASSERT(&tud_usbtmc_indicator_pulse_cb != NULL,); + if (usbtmc_state.capabilities->bmIntfcCapabilities.supportsIndicatorPulse) { + TU_ASSERT(&tud_usbtmc_indicator_pulse_cb != NULL,); + } #endif - usbtmcLock = osal_mutex_create(&usbtmcLockBuffer); + usbtmcLock = osal_mutex_create(&usbtmcLockBuffer); } uint16_t usbtmcd_open_cb(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uint16_t max_len) diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 56ba8bcd1..8fef11dc7 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -37,31 +37,31 @@ * manipulation that you are told to stay away. * * This contains macros for both VERIFY and ASSERT: - * + * * VERIFY: Used when there is an error condition which is not the * fault of the MCU. For example, bounds checking on data * sent to the micro over USB should use this function. * Another example is checking for buffer overflows, where * returning from the active function causes a NAK. - * + * * ASSERT: Used for error conditions that are caused by MCU firmware * bugs. This is used to discover bugs in the code more * quickly. One example would be adding assertions in library * function calls to confirm a function's (untainted) * parameters are valid. - * + * * The difference in behavior is that ASSERT triggers a breakpoint while * verify does not. * * #define TU_VERIFY(cond) if(cond) return false; * #define TU_VERIFY(cond,ret) if(cond) return ret; - * + * * #define TU_VERIFY_HDLR(cond,handler) if(cond) {handler; return false;} * #define TU_VERIFY_HDLR(cond,ret,handler) if(cond) {handler; return ret;} * * #define TU_ASSERT(cond) if(cond) {_MESS_FAILED(); TU_BREAKPOINT(), return false;} * #define TU_ASSERT(cond,ret) if(cond) {_MESS_FAILED(); TU_BREAKPOINT(), return ret;} - * + * *------------------------------------------------------------------*/ #ifdef __cplusplus @@ -81,8 +81,8 @@ #define _MESS_FAILED() do {} while (0) #endif -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7, M33 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__) #define TU_BREAKPOINT() do \ { \ volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ diff --git a/src/device/dcd_attr.h b/src/device/dcd_attr.h index 21bfbb545..b40c2ad07 100644 --- a/src/device/dcd_attr.h +++ b/src/device/dcd_attr.h @@ -86,6 +86,10 @@ #define DCD_ATTR_ENDPOINT_MAX 10 #define DCD_ATTR_ENDPOINT_EXCLUSIVE_NUMBER +#elif TU_CHECK_MCU(OPT_MCU_PIC32MZ) + #define DCD_ATTR_ENDPOINT_MAX 8 + #define DCD_ATTR_ENDPOINT_EXCLUSIVE_NUMBER + //------------- ST -------------// #elif TU_CHECK_MCU(OPT_MCU_STM32F0) #define DCD_ATTR_ENDPOINT_MAX 8 @@ -190,7 +194,7 @@ #define DCD_ATTR_ENDPOINT_MAX 4 //------------- Broadcom -------------// -#elif TU_CHECK_MCU(OPT_MCU_BCM2711) +#elif TU_CHECK_MCU(OPT_MCU_BCM2711, OPT_MCU_BCM2835, OPT_MCU_BCM2837) #define DCD_ATTR_ENDPOINT_MAX 8 //------------- Broadcom -------------// diff --git a/src/portable/microchip/pic32mz/dcd_pic32mz.c b/src/portable/microchip/pic32mz/dcd_pic32mz.c new file mode 100644 index 000000000..323d01a71 --- /dev/null +++ b/src/portable/microchip/pic32mz/dcd_pic32mz.c @@ -0,0 +1,737 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2022 Jerzy Kasenberg + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if TUSB_OPT_DEVICE_ENABLED && CFG_TUSB_MCU == OPT_MCU_PIC32MZ + +#include <common/tusb_common.h> +#include <device/dcd.h> + +#include <xc.h> +#include "usbhs_registers.h" + +#define USB_REGS ((usbhs_registers_t *) (_USB_BASE_ADDRESS)) + +// Maximum number of endpoints, could be trimmed down in tusb_config to reduce RAM usage. +#ifndef EP_MAX +#define EP_MAX 8 +#endif + + +typedef enum { + EP0_STAGE_NONE, + EP0_STAGE_SETUP_IN_DATA, + EP0_STAGE_SETUP_OUT_NO_DATA, + EP0_STAGE_SETUP_OUT_DATA, + EP0_STAGE_DATA_IN, + EP0_STAGE_DATA_IN_LAST_PACKET_FILLED, + EP0_STAGE_DATA_IN_SENT, + EP0_STAGE_DATA_OUT, + EP0_STAGE_DATA_OUT_COMPLETE, + EP0_STAGE_STATUS_IN, + EP0_STAGE_ADDRESS_CHANGE, +} ep0_stage_t; + +typedef struct { + uint8_t * buffer; + // Total length of current transfer + uint16_t total_len; + // Bytes transferred so far + uint16_t transferred; + uint16_t max_packet_size; + uint16_t fifo_size; + // Packet size sent or received so far. It is used to modify transferred field + // after ACK is received or when filling ISO endpoint with size larger then + // FIFO size. + uint16_t last_packet_size; + uint8_t ep_addr; +} xfer_ctl_t; + +static struct +{ + // Current FIFO RAM address used for FIFO allocation + uint16_t fifo_addr_top; + // EP0 transfer stage + ep0_stage_t ep0_stage; + // Device address + uint8_t dev_addr; + xfer_ctl_t xfer_status[EP_MAX][2]; +} _dcd; + +// Two endpoint 0 descriptor definition for unified dcd_edpt_open() +static tusb_desc_endpoint_t const ep0OUT_desc = +{ + .bLength = sizeof(tusb_desc_endpoint_t), + .bDescriptorType = TUSB_DESC_ENDPOINT, + + .bEndpointAddress = 0x00, + .bmAttributes = { .xfer = TUSB_XFER_CONTROL }, + .wMaxPacketSize = CFG_TUD_ENDPOINT0_SIZE, + .bInterval = 0 +}; + +static tusb_desc_endpoint_t const ep0IN_desc = +{ + .bLength = sizeof(tusb_desc_endpoint_t), + .bDescriptorType = TUSB_DESC_ENDPOINT, + + .bEndpointAddress = 0x80, + .bmAttributes = { .xfer = TUSB_XFER_CONTROL }, + .wMaxPacketSize = CFG_TUD_ENDPOINT0_SIZE, + .bInterval = 0 +}; + +#define XFER_CTL_BASE(_ep, _dir) &_dcd.xfer_status[_ep][_dir] + +static void ep0_set_stage(ep0_stage_t stage) +{ + _dcd.ep0_stage = stage; +} + +static ep0_stage_t ep0_get_stage(void) +{ + return _dcd.ep0_stage; +} + +/*------------------------------------------------------------------*/ +/* Controller API + *------------------------------------------------------------------*/ +void dcd_init(uint8_t rhport) +{ + // Disable endpoint interrupts for now + USB_REGS->INTRRXEbits.w = 0; + USB_REGS->INTRTXEbits.w = 0; + // Enable Reset/Suspend/Resume interrupts only + USB_REGS->INTRUSBEbits.w = 7; + + dcd_connect(rhport); +} + +void dcd_int_enable(uint8_t rhport) +{ + (void) rhport; + + USBCRCONbits.USBIE = 1; +} + +void dcd_int_disable(uint8_t rhport) +{ + (void) rhport; + + USBCRCONbits.USBIE = 0; +} + +void dcd_set_address(uint8_t rhport, uint8_t dev_addr) +{ + (void) rhport; + + ep0_set_stage(EP0_STAGE_ADDRESS_CHANGE); + // Store address it will be used later after status stage is done + _dcd.dev_addr = dev_addr; + // Confirm packet now, address will be set when status stage is detected + USB_REGS->EPCSR[0].CSR0L_DEVICEbits.w = (USBHS_EP0_DEVICE_SERVICED_RXPKTRDY | USBHS_EP0_DEVICE_DATAEND); +} + +void dcd_remote_wakeup(uint8_t rhport) +{ + (void) rhport; + + USB_REGS->POWERbits.RESUME = 1; +#if CFG_TUSB_OS != OPT_OS_NONE + osal_task_delay(10); +#endif + USB_REGS->POWERbits.RESUME = 0; +} + +void dcd_connect(uint8_t rhport) +{ + (void) rhport; + + USB_REGS->POWERbits.HSEN = TUD_OPT_HIGH_SPEED ? 1 : 0; + USB_REGS->POWERbits.SOFTCONN = 1; +} + +void dcd_disconnect(uint8_t rhport) +{ + (void) rhport; + + USB_REGS->POWERbits.SOFTCONN = 1; +} + +TU_ATTR_ALWAYS_INLINE static inline bool is_in_isr(void) +{ + return (_CP0_GET_STATUS() & (_CP0_STATUS_EXL_MASK | _CP0_STATUS_IPL_MASK)) != 0; +} + +static void epn_rx_configure(uint8_t endpoint, uint16_t endpointSize, + uint16_t fifoAddress, uint8_t fifoSize, + uint32_t transferType) +{ + uint8_t old_index = USB_REGS->INDEXbits.ENDPOINT; + + // Select endpoint register set (same register address is used for all endpoints. + USB_REGS->INDEXbits.ENDPOINT = endpoint; + + // Configure the Endpoint size + USB_REGS->INDEXED_EPCSR.RXMAXPbits.RXMAXP = endpointSize; + + // Set up the fifo address. + USB_REGS->RXFIFOADDbits.RXFIFOAD = fifoAddress; + + // Resets the endpoint data toggle to 0 + USB_REGS->INDEXED_EPCSR.RXCSRL_DEVICEbits.CLRDT = 1; + + // Set up the FIFO size + USB_REGS->RXFIFOSZbits.RXFIFOSZ = fifoSize; + + USB_REGS->INDEXED_EPCSR.RXCSRH_DEVICEbits.ISO = transferType == 1 ? 1 : 0; + // Disable NYET Handshakes for interrupt endpoints + USB_REGS->INDEXED_EPCSR.RXCSRH_DEVICEbits.DISNYET = transferType == 3 ? 1 : 0; + + // Restore the index register. + USB_REGS->INDEXbits.ENDPOINT = old_index; + + // Enable the endpoint interrupt. + USB_REGS->INTRRXEbits.w |= (1 << endpoint); +} + +static void epn_tx_configure(uint8_t endpoint, uint16_t endpointSize, + uint16_t fifoAddress, uint8_t fifoSize, + uint32_t transferType) +{ + uint8_t old_index = USB_REGS->INDEXbits.ENDPOINT; + + // Select endpoint register set (same register address is used for all endpoints. + USB_REGS->INDEXbits.ENDPOINT = endpoint; + + // Configure the Endpoint size + USB_REGS->INDEXED_EPCSR.TXMAXPbits.TXMAXP = endpointSize; + + // Set up the fifo address + USB_REGS->TXFIFOADDbits.TXFIFOAD = fifoAddress; + + // Resets the endpoint data toggle to 0 + USB_REGS->INDEXED_EPCSR.TXCSRL_DEVICEbits.CLRDT = 1; + + // Set up the FIFO size + USB_REGS->TXFIFOSZbits.TXFIFOSZ = fifoSize; + + USB_REGS->INDEXED_EPCSR.TXCSRH_DEVICEbits.ISO = 1 == transferType ? 1 : 0; + + // Restore the index register + USB_REGS->INDEXbits.ENDPOINT = old_index; + + // Enable the interrupt + USB_REGS->INTRTXEbits.w |= (1 << endpoint); +} + +static void tx_fifo_write(uint8_t endpoint, uint8_t const * buffer, size_t count) +{ + size_t i; + volatile uint8_t * fifo_reg; + + fifo_reg = (volatile uint8_t *) (&USB_REGS->FIFO[endpoint]); + + for (i = 0; i < count; i++) + { + *fifo_reg = buffer[i]; + } +} + +static int rx_fifo_read(uint8_t epnum, uint8_t * buffer) +{ + uint32_t i; + uint32_t count; + volatile uint8_t * fifo_reg; + + fifo_reg = (volatile uint8_t *) (&USB_REGS->FIFO[epnum]); + + count = USB_REGS->EPCSR[epnum].RXCOUNTbits.RXCNT; + + for (i = 0; i < count; i++) + { + buffer[i] = fifo_reg[i & 3]; + } + + return count; +} + +static void xfer_complete(xfer_ctl_t * xfer, uint8_t result, bool in_isr) +{ + dcd_event_xfer_complete(0, xfer->ep_addr, xfer->transferred, result, in_isr); +} + +static void ep0_fill_tx(xfer_ctl_t * xfer_in) +{ + uint16_t left = xfer_in->total_len - xfer_in->transferred; + + if (left) + { + xfer_in->last_packet_size = tu_min16(xfer_in->max_packet_size, left); + tx_fifo_write(0, xfer_in->buffer + xfer_in->transferred, xfer_in->last_packet_size); + xfer_in->transferred += xfer_in->last_packet_size; + left = xfer_in->total_len - xfer_in->transferred; + } + + if (xfer_in->last_packet_size < xfer_in->max_packet_size || left == 0) + { + switch (ep0_get_stage()) + { + case EP0_STAGE_SETUP_IN_DATA: + case EP0_STAGE_DATA_IN: + case EP0_STAGE_DATA_IN_SENT: + ep0_set_stage(EP0_STAGE_DATA_IN_LAST_PACKET_FILLED); + USB_REGS->EPCSR[0].CSR0L_DEVICEbits.TXPKTRDY = 1; + break; + case EP0_STAGE_SETUP_OUT_NO_DATA: + ep0_set_stage(EP0_STAGE_STATUS_IN); + USB_REGS->EPCSR[0].CSR0L_DEVICEbits.w = (USBHS_EP0_DEVICE_SERVICED_RXPKTRDY | USBHS_EP0_DEVICE_DATAEND); + break; + case EP0_STAGE_DATA_OUT_COMPLETE: + ep0_set_stage(EP0_STAGE_STATUS_IN); + USB_REGS->EPCSR[0].CSR0L_DEVICEbits.w = (USBHS_EP0_DEVICE_SERVICED_RXPKTRDY | USBHS_EP0_DEVICE_DATAEND); + break; + default: + break; + } + } + else + { + switch (ep0_get_stage()) + { + case EP0_STAGE_SETUP_IN_DATA: + ep0_set_stage(EP0_STAGE_DATA_IN); + // fall through + case EP0_STAGE_DATA_IN: + USB_REGS->EPCSR[0].CSR0L_DEVICEbits.TXPKTRDY = 1; + break; + default: + break; + } + } +} + +static void epn_fill_tx(xfer_ctl_t * xfer_in, uint8_t epnum) +{ + uint16_t left = xfer_in->total_len - xfer_in->transferred; + if (left) + { + xfer_in->last_packet_size = tu_min16(xfer_in->max_packet_size, left); + tx_fifo_write(epnum, xfer_in->buffer + xfer_in->transferred, xfer_in->last_packet_size); + } + USB_REGS->EPCSR[epnum].TXCSRL_DEVICEbits.TXPKTRDY = 1; +} + +static bool ep0_xfer(xfer_ctl_t * xfer, int dir) +{ + if (dir == TUSB_DIR_OUT) + { + if (xfer->total_len) + { + switch (_dcd.ep0_stage) + { + case EP0_STAGE_DATA_OUT_COMPLETE: + case EP0_STAGE_SETUP_OUT_DATA: + ep0_set_stage(EP0_STAGE_DATA_OUT); + USB_REGS->EPCSR[0].CSR0L_DEVICEbits.SVCRPR = 1; + break; + default: + TU_ASSERT(0); + } + } + else + { + switch (_dcd.ep0_stage) + { + case EP0_STAGE_DATA_IN_SENT: + ep0_set_stage(EP0_STAGE_NONE); + // fall through + case EP0_STAGE_NONE: + xfer_complete(xfer, XFER_RESULT_SUCCESS, true); + break; + default: + break; + } + } + } + else // IN + { + ep0_fill_tx(xfer); + } + + return true; +} + +/*------------------------------------------------------------------*/ +/* DCD Endpoint port + *------------------------------------------------------------------*/ + +bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) +{ + (void) rhport; + uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress); + uint8_t const dir = tu_edpt_dir(desc_edpt->bEndpointAddress); + xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir); + + TU_ASSERT(epnum < EP_MAX); + + xfer->max_packet_size = tu_edpt_packet_size(desc_edpt); + xfer->fifo_size = xfer->max_packet_size; + xfer->ep_addr = desc_edpt->bEndpointAddress; + + if (epnum != 0) + { + if (dir == TUSB_DIR_OUT) + { + epn_rx_configure(epnum, xfer->max_packet_size, _dcd.fifo_addr_top, __builtin_ctz(xfer->fifo_size) - 3, desc_edpt->bmAttributes.xfer); + _dcd.fifo_addr_top += (xfer->fifo_size + 7) >> 3; + } + else + { + epn_tx_configure(epnum, xfer->max_packet_size, _dcd.fifo_addr_top, __builtin_ctz(xfer->fifo_size) - 3, desc_edpt->bmAttributes.xfer); + _dcd.fifo_addr_top += (xfer->fifo_size + 7) >> 3; + } + } + return true; +} + +void dcd_edpt_close_all (uint8_t rhport) +{ + (void) rhport; + + // Reserve EP0 FIFO address + _dcd.fifo_addr_top = 64 >> 3; + for (int i = 1; i < EP_MAX; ++i) + { + tu_memclr(&_dcd.xfer_status[i], sizeof(_dcd.xfer_status[i])); + } +} + +void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) +{ + (void) rhport; + (void) ep_addr; +} + +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +{ + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir); + (void) rhport; + + xfer->buffer = buffer; + xfer->total_len = total_bytes; + xfer->last_packet_size = 0; + xfer->transferred = 0; + + if (epnum == 0) + { + return ep0_xfer(xfer, dir); + } + if (dir == TUSB_DIR_OUT) + { + USB_REGS->INTRRXEbits.w |= (1u << epnum); + } + else // IN + { + epn_fill_tx(xfer, epnum); + } + + return true; +} + +void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) +{ + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + (void) rhport; + + if (epnum == 0) + { + USB_REGS->EPCSR[0].CSR0L_DEVICEbits.SENDSTALL = 1; + } + else + { + if (dir == TUSB_DIR_OUT) + { + USB_REGS->EPCSR[epnum].RXCSRL_DEVICEbits.SENDSTALL = 1; + } + else + { + USB_REGS->EPCSR[epnum].TXCSRL_DEVICEbits.SENDSTALL = 1; + } + } +} + +void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) +{ + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + (void) rhport; + + if (epnum == 0) + { + USB_REGS->EPCSR[0].CSR0L_DEVICEbits.SENDSTALL = 0; + } + else + { + if (dir == TUSB_DIR_OUT) + { + USB_REGS->EPCSR[epnum].RXCSRL_DEVICEbits.w &= ~(USBHS_EP_DEVICE_RX_SENT_STALL | USBHS_EP_DEVICE_RX_SEND_STALL); + USB_REGS->EPCSR[epnum].RXCSRL_DEVICEbits.CLRDT = 1; + } + else + { + USB_REGS->EPCSR[epnum].TXCSRL_DEVICEbits.w &= ~(USBHS_EP_DEVICE_TX_SENT_STALL | USBHS_EP_DEVICE_TX_SEND_STALL); + USB_REGS->EPCSR[epnum].TXCSRL_DEVICEbits.CLRDT = 1; + } + } +} + +/*------------------------------------------------------------------*/ +/* Interrupt Handler + *------------------------------------------------------------------*/ + +static void ep0_handle_rx(void) +{ + int transferred; + xfer_ctl_t * xfer = XFER_CTL_BASE(0, TUSB_DIR_OUT); + + TU_ASSERT(xfer->buffer,); + + transferred = rx_fifo_read(0, xfer->buffer + xfer->transferred); + xfer->transferred += transferred; + if (transferred < xfer->max_packet_size || xfer->transferred == xfer->total_len) + { + ep0_set_stage(EP0_STAGE_DATA_OUT_COMPLETE); + xfer_complete(xfer, XFER_RESULT_SUCCESS, true); + } + else + { + USB_REGS->EPCSR[0].CSR0L_DEVICEbits.SVCRPR = 1; + } +} + +static void epn_handle_rx_int(uint8_t epnum) +{ + uint8_t ep_status; + int transferred; + xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, TUSB_DIR_OUT); + + ep_status = USB_REGS->EPCSR[epnum].RXCSRL_DEVICEbits.w; + if (ep_status & USBHS_EP_DEVICE_RX_SENT_STALL) + { + USB_REGS->EPCSR[epnum].RXCSRL_DEVICEbits.w &= ~USBHS_EP_DEVICE_RX_SENT_STALL; + } + + if (ep_status & USBHS_EP0_HOST_RXPKTRDY) + { + TU_ASSERT(xfer->buffer != NULL,); + + transferred = rx_fifo_read(epnum, xfer->buffer + xfer->transferred); + USB_REGS->EPCSR[epnum].RXCSRL_HOSTbits.RXPKTRDY = 0; + xfer->transferred += transferred; + if (transferred < xfer->max_packet_size || xfer->transferred == xfer->total_len) + { + xfer_complete(xfer, XFER_RESULT_SUCCESS, true); + } + } +} + +static void epn_handle_tx_int(uint8_t epnum) +{ + uint8_t ep_status = USB_REGS->EPCSR[epnum].TXCSRL_DEVICEbits.w; + xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, TUSB_DIR_IN); + + if (ep_status & USBHS_EP_DEVICE_TX_SENT_STALL) + { + USB_REGS->EPCSR[epnum].TXCSRL_DEVICEbits.w &= ~USBHS_EP_DEVICE_TX_SENT_STALL; + } + else + { + xfer->transferred += xfer->last_packet_size; + if (xfer->last_packet_size < xfer->max_packet_size || xfer->transferred == xfer->total_len) + { + xfer->last_packet_size = 0; + xfer_complete(xfer, XFER_RESULT_SUCCESS, true); + } + else + { + epn_fill_tx(xfer, epnum); + } + } +} + +static void ep0_handle_int(void) +{ + __USBHS_CSR0L_DEVICE_t ep0_status; + union { + tusb_control_request_t request; + uint32_t setup_buffer[2]; + } setup_packet; + xfer_ctl_t * xfer_in = XFER_CTL_BASE(0, TUSB_DIR_IN); + uint8_t old_index = USB_REGS->INDEXbits.ENDPOINT; + + // Select EP0 registers + USB_REGS->INDEXbits.ENDPOINT = 0; + + ep0_status = USB_REGS->EPCSR[0].CSR0L_DEVICEbits; + + if (ep0_status.SENTSTALL) + { + // Stall was sent. Reset the endpoint 0 state. + // Clear the sent stall bit. + ep0_set_stage(EP0_STAGE_NONE); + USB_REGS->EPCSR[0].CSR0L_DEVICEbits.SENTSTALL = 0; + } + + if (ep0_status.SETUPEND) + { + // This means the current control transfer end prematurely. We don't + // need to end any transfers. The device layer will manage the + // premature transfer end. We clear the SetupEnd bit and reset the + // driver control transfer state machine to waiting for next setup + // packet from host. + USB_REGS->EPCSR[0].CSR0L_DEVICEbits.SVSSETEND = 1; + ep0_set_stage(EP0_STAGE_NONE); + } + + if (ep0_status.RXPKTRDY) + { + switch (ep0_get_stage()) + { + default: + // Data arrived at unexpected state, this must be setup stage packet after all. + // Fall through + case EP0_STAGE_NONE: + // This means we were expecting a SETUP packet and we got one. + setup_packet.setup_buffer[0] = USB_REGS->FIFO[0]; + setup_packet.setup_buffer[1] = USB_REGS->FIFO[0]; + if (setup_packet.request.bmRequestType_bit.direction == TUSB_DIR_OUT) + { + // SVCRPR is not set yet, it will be set later when out xfer is started + // Till then NAKs will hold incommint data + ep0_set_stage(setup_packet.request.wLength == 0 ? EP0_STAGE_SETUP_OUT_NO_DATA : EP0_STAGE_SETUP_OUT_DATA); + } + else + { + USB_REGS->EPCSR[0].CSR0L_DEVICEbits.SVCRPR = 1; + ep0_set_stage(EP0_STAGE_SETUP_IN_DATA); + } + dcd_event_setup_received(0, &setup_packet.request.bmRequestType, true); + break; + case EP0_STAGE_DATA_OUT: + ep0_handle_rx(); + break; + } + } + else + { + switch (ep0_get_stage()) + { + case EP0_STAGE_STATUS_IN: + // Status was just sent, this concludes request, notify client + ep0_set_stage(EP0_STAGE_NONE); + xfer_complete(xfer_in, XFER_RESULT_SUCCESS, true); + break; + case EP0_STAGE_DATA_IN: + // Packet sent, fill more data + ep0_fill_tx(xfer_in); + break; + case EP0_STAGE_DATA_IN_LAST_PACKET_FILLED: + ep0_set_stage(EP0_STAGE_DATA_IN_SENT); + xfer_complete(xfer_in, XFER_RESULT_SUCCESS, true); + break; + case EP0_STAGE_ADDRESS_CHANGE: + // Status stage after set address request finished, address can be changed + USB_REGS->FADDRbits.FUNC = _dcd.dev_addr; + ep0_set_stage(EP0_STAGE_NONE); + break; + default: + break; + } + } + // Restore register index + USB_REGS->INDEXbits.ENDPOINT = old_index; +} + +void dcd_int_handler(uint8_t rhport) +{ + int i; + uint8_t mask; + __USBCSR2bits_t csr2_bits; + uint16_t rxints = USB_REGS->INTRRX; + uint16_t txints = USB_REGS->INTRTX; + csr2_bits = USBCSR2bits; + (void) rhport; + + IFS4CLR = _IFS4_USBIF_MASK; + + if (csr2_bits.SOFIF && csr2_bits.SOFIE) + { + dcd_event_bus_signal(0, DCD_EVENT_SOF, true); + } + if (csr2_bits.RESETIF) + { + dcd_edpt_open(0, &ep0OUT_desc); + dcd_edpt_open(0, &ep0IN_desc); + dcd_event_bus_reset(0, USB_REGS->POWERbits.HSMODE ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL, true); + } + if (csr2_bits.SUSPIF) + { + dcd_event_bus_signal(0, DCD_EVENT_SUSPEND, true); + } + if (csr2_bits.RESUMEIF) + { + dcd_event_bus_signal(0, DCD_EVENT_RESUME, true); + } + // INTRTX has bit for EP0 + if (txints & 1) + { + txints ^= 1; + ep0_handle_int(); + } + for (mask = 0x02, i = 1; rxints != 0 && mask != 0; mask <<= 1, ++i) + { + if (rxints & mask) + { + rxints ^= mask; + epn_handle_rx_int(i); + } + } + for (mask = 0x02, i = 1; txints != 0 && mask != 0; mask <<= 1, ++i) + { + if (txints & mask) + { + txints ^= mask; + epn_handle_tx_int(i); + } + } +} + +#endif diff --git a/src/portable/microchip/pic32mz/usbhs_registers.h b/src/portable/microchip/pic32mz/usbhs_registers.h new file mode 100644 index 000000000..757e3f083 --- /dev/null +++ b/src/portable/microchip/pic32mz/usbhs_registers.h @@ -0,0 +1,931 @@ +/******************************************************************************* +* Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries. +* +* Subject to your compliance with these terms, you may use Microchip software +* and any derivatives exclusively with Microchip products. It is your +* responsibility to comply with third party license terms applicable to your +* use of third party software (including open source software) that may +* accompany Microchip software. +* +* THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, WHETHER +* EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, INCLUDING ANY IMPLIED +* WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A +* PARTICULAR PURPOSE. +* +* IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, +* INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND +* WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS +* BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE +* FULLEST EXTENT ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN +* ANY WAY RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY, +* THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE. +*******************************************************************************/ +/******************************************************************************* + USBHS Peripheral Library Register Defintions + + File Name: + usbhs_registers.h + + Summary: + USBHS PLIB Register Defintions + + Description: + This file contains the constants and defintions which are required by the + the USBHS library. +*******************************************************************************/ + +#ifndef __USBHS_REGISTERS_H__ +#define __USBHS_REGISTERS_H__ + +#include <p32xxxx.h> +#include <stdint.h> + +/***************************************** + * Module Register Offsets. + *****************************************/ + +#define USBHS_REG_FADDR 0x000 +#define USBHS_REG_POWER 0x001 +#define USBHS_REG_INTRTX 0x002 +#define USBHS_REG_INTRRX 0x004 +#define USBHS_REG_INTRTXE 0x006 +#define USBHS_REG_INTRRXE 0x008 +#define USBHS_REG_INTRUSB 0x00A +#define USBHS_REG_INTRUSBE 0x00B +#define USBHS_REG_FRAME 0x00C +#define USBHS_REG_INDEX 0x00E +#define USBHS_REG_TESTMODE 0x00F + +/******************************************************* + * Endpoint Control Status Registers (CSR). These values + * should be added to either the 0x10 to access the + * register through Indexed CSR. To access the actual + * CSR, see ahead in this header file. + ******************************************************/ + +#define USBHS_REG_EP_TXMAXP 0x000 +#define USBHS_REG_EP_CSR0L 0x002 +#define USBHS_REG_EP_CSR0H 0x003 +#define USBHS_REG_EP_TXCSRL 0x002 +#define USBHS_REG_EP_TXCSRH 0x003 +#define USBHS_REG_EP_RXMAXP 0x004 +#define USBHS_REG_EP_RXCSRL 0x006 +#define USBHS_REG_EP_RXCSRH 0x007 +#define USBHS_REG_EP_COUNT0 0x008 +#define USBHS_REG_EP_RXCOUNT 0x008 +#define USBHS_REG_EP_TYPE0 0x01A +#define USBHS_REG_EP_TXTYPE 0x01A +#define USBHS_REG_EP_NAKLIMIT0 0x01B +#define USBHS_REG_EP_TXINTERVAL 0x01B +#define USBHS_REG_EP_RXTYPE 0x01C +#define USBHS_REG_EP_RXINTERVAL 0x01D +#define USBHS_REG_EP_CONFIGDATA 0x01F +#define USBHS_REG_EP_FIFOSIZE 0x01F + +#define USBHS_HOST_EP0_SETUPKT_SET 0x8 +#define USBHS_HOST_EP0_TXPKTRDY_SET 0x2 +#define USBHS_SOFT_RST_NRST_SET 0x1 +#define USBHS_SOFT_RST_NRSTX_SET 0x2 +#define USBHS_EP0_DEVICE_SERVICED_RXPKTRDY 0x40 +#define USBHS_EP0_DEVICE_DATAEND 0x08 +#define USBHS_EP0_DEVICE_TXPKTRDY 0x02 +#define USBHS_EP0_HOST_STATUS_STAGE_START 0x40 +#define USBHS_EP0_HOST_REQPKT 0x20 +#define USBHS_EP0_HOST_TXPKTRDY 0x02 +#define USBHS_EP0_HOST_RXPKTRDY 0x01 +#define USBHS_EP_DEVICE_TX_SENT_STALL 0x20 +#define USBHS_EP_DEVICE_TX_SEND_STALL 0x10 +#define USBHS_EP_DEVICE_RX_SENT_STALL 0x40 +#define USBHS_EP_DEVICE_RX_SEND_STALL 0x20 + +/* FADDR - Device Function Address */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned FUNC:7; + unsigned :1; + }; + + uint8_t w; + +} __USBHS_FADDR_t; + +/* POWER - Control Resume and Suspend signalling */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned SUSPEN:1; + unsigned SUSPMODE:1; + unsigned RESUME:1; + unsigned RESET:1; + unsigned HSMODE:1; + unsigned HSEN:1; + unsigned SOFTCONN:1; + unsigned ISOUPD:1; + }; + struct + { + uint8_t w; + }; + +} __USBHS_POWER_t; + +/* INTRTXE - Transmit endpoint interrupt enable */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned EP0IE:1; + unsigned EP1TXIE:1; + unsigned EP2TXIE:1; + unsigned EP3TXIE:1; + unsigned EP4TXIE:1; + unsigned EP5TXIE:1; + unsigned EP6TXIE:1; + unsigned EP7TXIE:1; + unsigned :8; + }; + struct + { + uint16_t w; + }; + +} __USBHS_INTRTXE_t; + +/* INTRRXE - Receive endpoint interrupt enable */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned :1; + unsigned EP1RXIE:1; + unsigned EP2RXIE:1; + unsigned EP3RXIE:1; + unsigned EP4RXIE:1; + unsigned EP5RXIE:1; + unsigned EP6RXIE:1; + unsigned EP7RXIE:1; + unsigned :8; + }; + struct + { + uint16_t w; + }; + +} __USBHS_INTRRXE_t; + +/* INTRUSBE - General USB Interrupt enable */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned SUSPIE:1; + unsigned RESUMEIE:1; + unsigned RESETIE:1; + unsigned SOFIE:1; + unsigned CONNIE:1; + unsigned DISCONIE:1; + unsigned SESSRQIE:1; + unsigned VBUSERRIE:1; + }; + struct + { + uint8_t w; + }; + +} __USBHS_INTRUSBE_t; + +/* FRAME - Frame number */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned RFRMNUM:11; + unsigned :5; + }; + struct + { + uint16_t w; + }; + +} __USBHS_FRAME_t; + +/* INDEX - Endpoint index */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned ENDPOINT:4; + unsigned :4; + }; + struct + { + uint8_t w; + }; + +} __USBHS_INDEX_t; + +/* TESTMODE - Test mode register */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned NAK:1; + unsigned TESTJ:1; + unsigned TESTK:1; + unsigned PACKET:1; + unsigned FORCEHS:1; + unsigned FORCEFS:1; + unsigned FIFOACC:1; + unsigned FORCEHST:1; + }; + struct + { + uint8_t w; + }; + +} __USBHS_TESTMODE_t; + +/* COUNT0 - Indicates the amount of data received in endpoint 0 */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned RXCNT:7; + unsigned :1; + }; + struct + { + uint8_t w; + }; + +} __USBHS_COUNT0_t; + +/* TYPE0 - Operating speed of target device */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned :6; + unsigned SPEED:2; + }; + struct + { + uint8_t w; + }; + +} __USBHS_TYPE0_t; + +/* DEVCTL - Module control register */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned SESSION:1; + unsigned HOSTREQ:1; + unsigned HOSTMODE:1; + unsigned VBUS:2; + unsigned LSDEV:1; + unsigned FSDEV:1; + unsigned BDEV:1; + }; + struct + { + uint8_t w; + }; + +} __USBHS_DEVCTL_t; + +/* CSR0L Device - Endpoint Device Mode Control Status Register */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned RXPKTRDY:1; + unsigned TXPKTRDY:1; + unsigned SENTSTALL:1; + unsigned DATAEND:1; + unsigned SETUPEND:1; + unsigned SENDSTALL:1; + unsigned SVCRPR:1; + unsigned SVSSETEND:1; + }; + struct + { + uint8_t w; + }; + +} __USBHS_CSR0L_DEVICE_t; + +/* CSR0L Host - Endpoint Host Mode Control Status Register */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned RXPKTRDY:1; + unsigned TXPKTRDY:1; + unsigned RXSTALL:1; + unsigned SETUPPKT:1; + unsigned ERROR:1; + unsigned REQPKT:1; + unsigned STATPKT:1; + unsigned NAKTMOUT:1; + }; + struct + { + uint8_t w; + }; + +} __USBHS_CSR0L_HOST_t; + +/* TXCSRL Device - Endpoint Transmit Control Status Register Low */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned TXPKTRDY:1; + unsigned FIFOONE:1; + unsigned UNDERRUN:1; + unsigned FLUSH:1; + unsigned SENDSTALL:1; + unsigned SENTSTALL:1; + unsigned CLRDT:1; + unsigned INCOMPTX:1; + }; + struct + { + uint8_t w; + }; + +} __USBHS_TXCSRL_DEVICE_t; + +/* TXCSRL Host - Endpoint Transmit Control Status Register Low */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned TXPKTRDY:1; + unsigned FIFONE:1; + unsigned ERROR:1; + unsigned FLUSH:1; + unsigned SETUPPKT:1; + unsigned RXSTALL:1; + unsigned CLRDT:1; + unsigned INCOMPTX:1; + }; + struct + { + uint8_t w; + }; + +} __USBHS_TXCSRL_HOST_t; + +/* TXCSRH Device - Endpoint Transmit Control Status Register High */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned :2; + unsigned DMAREQMD:1; + unsigned FRCDATTG:1; + unsigned DMAREQENL:1; + unsigned MODE:1; + unsigned ISO:1; + unsigned AUTOSET:1; + }; + struct + { + uint8_t w; + }; + +} __USBHS_TXCSRH_DEVICE_t; + +/* TXCSRH Host - Endpoint Transmit Control Status Register High */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned DATATGGL:1; + unsigned DTWREN:1; + unsigned DMAREQMD:1; + unsigned FRCDATTG:1; + unsigned DMAREQEN:1; + unsigned MODE:1; + unsigned :1; + unsigned AUOTSET:1; + }; + struct + { + uint8_t w; + }; + +} __USBHS_TXCSRH_HOST_t; + +/* CSR0H Device - Endpoint 0 Control Status Register High */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned FLSHFIFO:1; + unsigned :7; + }; + struct + { + uint8_t w; + }; + +} __USBHS_CSR0H_DEVICE_t; + +/* CSR0H Host - Endpoint 0 Control Status Register High */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned FLSHFIFO:1; + unsigned DATATGGL:1; + unsigned DTWREN:1; + unsigned DISPING:1; + unsigned :4; + }; + struct + { + uint8_t w; + }; + +} __USBHS_CSR0H_HOST_t; + +/* RXMAXP - Receive Endpoint Max packet size. */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned RXMAXP:11; + unsigned MULT:5; + }; + struct + { + uint16_t w; + }; + +} __USBHS_RXMAXP_t; + +/* RXCSRL Device - Receive endpoint Control Status Register */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned RXPKTRDY:1; + unsigned FIFOFULL:1; + unsigned OVERRUN:1; + unsigned DATAERR:1; + unsigned FLUSH:1; + unsigned SENDSTALL:1; + unsigned SENTSTALL:1; + unsigned CLRDT:1; + }; + struct + { + uint8_t w; + }; + +} __USBHS_RXCSRL_DEVICE_t; + +/* RXCSRL Host - Receive endpoint Control Status Register */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned RXPKTRDY:1; + unsigned FIFOFULL:1; + unsigned ERROR:1; + unsigned DERRNAKT:1; + unsigned FLUSH:1; + unsigned REQPKT:1; + unsigned RXSTALL:1; + unsigned CLRDT:1; + }; + struct + { + uint8_t w; + }; + +} __USBHS_RXCSRL_HOST_t; + +/* RXCSRH Device - Receive endpoint Control Status Register */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned INCOMPRX:1; + unsigned :2; + unsigned DMAREQMODE:1; + unsigned DISNYET:1; + unsigned DMAREQEN:1; + unsigned ISO:1; + unsigned AUTOCLR:1; + }; + struct + { + uint8_t w; + }; + +} __USBHS_RXCSRH_DEVICE_t; + +/* RXCSRH Host - Receive endpoint Control Status Register */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned INCOMPRX:1; + unsigned DATATGGL:1; + unsigned DATATWEN:1; + unsigned DMAREQMD:1; + unsigned PIDERR:1; + unsigned DMAREQEN:1; + unsigned AUTORQ:1; + unsigned AUOTCLR:1; + }; + struct + { + uint8_t w; + }; + +} __USBHS_RXCSRH_HOST_t; + +/* RXCOUNT - Amount of data pending in RX FIFO */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned RXCNT:14; + unsigned :2; + }; + struct + { + uint16_t w; + }; + +} __USBHS_RXCOUNT_t; + +/* TXTYPE - Specifies the target transmit endpoint */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned TEP:4; + unsigned PROTOCOL:2; + unsigned SPEED:2; + }; + struct + { + uint8_t w; + }; + +} __USBHS_TXTYPE_t; + +/* RXTYPE - Specifies the target receive endpoint */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned TEP:4; + unsigned PROTOCOL:2; + unsigned SPEED:2; + }; + struct + { + uint8_t w; + }; + +} __USBHS_RXTYPE_t; + +/* TXINTERVAL - Defines the polling interval */ +typedef struct +{ + uint8_t TXINTERV; + +} __USBHS_TXINTERVAL_t; + +/* RXINTERVAL - Defines the polling interval */ +typedef struct +{ + uint8_t RXINTERV; + +} __USBHS_RXINTERVAL_t; + +/* TXMAXP - Maximum amount of data that can be transferred through a TX endpoint + * */ + +typedef union +{ + struct __attribute__((packed)) + { + unsigned TXMAXP:11; + unsigned MULT:5; + }; + uint16_t w; + +} __USBHS_TXMAXP_t; + +/* TXFIFOSZ - Size of the transmit endpoint FIFO */ +typedef struct __attribute__((packed)) +{ + unsigned TXFIFOSZ:4; + unsigned TXDPB:1; + unsigned :3; + +} __USBHS_TXFIFOSZ_t; + +/* RXFIFOSZ - Size of the receive endpoint FIFO */ +typedef struct __attribute__((packed)) +{ + unsigned RXFIFOSZ:4; + unsigned RXDPB:1; + unsigned :3; + +} __USBHS_RXFIFOSZ_t; + +/* TXFIFOADD - Start address of the transmit endpoint FIFO */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned TXFIFOAD:13; + unsigned :3; + }; + uint16_t w; + +} __USBHS_TXFIFOADD_t; + +/* RXFIFOADD - Start address of the receive endpoint FIFO */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned RXFIFOAD:13; + unsigned :3; + }; + uint16_t w; + +} __USBHS_RXFIFOADD_t; + +/* SOFTRST - Asserts NRSTO and NRSTOX */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned NRST:1; + unsigned NRSTX:1; + unsigned :6; + }; + uint8_t w; + +} __USBHS_SOFTRST_t; + +/* TXFUNCADDR - Target address of transmit endpoint */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned TXFADDR:7; + unsigned :1; + }; + uint8_t w; + +} __USBHS_TXFUNCADDR_t; + +/* RXFUNCADDR - Target address of receive endpoint */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned RXFADDR:7; + unsigned :1; + }; + uint8_t w; + +} __USBHS_RXFUNCADDR_t; + +/* TXHUBADDR - Address of the hub to which the target transmit device endpoint + * is connected */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned TXHUBADDR:7; + unsigned MULTTRAN:1; + }; + uint8_t w; + +} __USBHS_TXHUBADDR_t; + +/* RXHUBADDR - Address of the hub to which the target receive device endpoint is + * connected */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned RXHUBADDR:7; + unsigned MULTTRAN:1; + }; + uint8_t w; + +} __USBHS_RXHUBADDR_t; + +/* TXHUBPORT - Address of the hub to which the target transmit device endpoint + * is connected. */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned TXHUBPRT:7; + unsigned :1; + }; + + uint8_t w; + +} __USBHS_TXHUBPORT_t; + +/* RXHUBPORT - Address of the hub to which the target receive device endpoint + * is connected. */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned RXHUBPRT:7; + unsigned :1; + }; + + uint8_t w; + +} __USBHS_RXHUBPORT_t; + +/* DMACONTROL - Configures a DMA channel */ +typedef union +{ + struct __attribute__((packed)) + { + unsigned DMAEN:1; + unsigned DMADIR:1; + unsigned DMAMODE:1; + unsigned DMAIE:1; + unsigned DMAEP:4; + unsigned DMAERR:1; + unsigned DMABRSTM:2; + unsigned:21; + }; + + uint32_t w; + +} __USBHS_DMACNTL_t; + +/* Endpoint Control and Status Register Set */ +typedef struct __attribute__((packed)) +{ + volatile __USBHS_TXMAXP_t TXMAXPbits; + union + { + struct + { + union + { + volatile __USBHS_CSR0L_DEVICE_t CSR0L_DEVICEbits; + volatile __USBHS_CSR0L_HOST_t CSR0L_HOSTbits; + }; + union + { + volatile __USBHS_CSR0H_DEVICE_t CSR0H_DEVICEbits; + volatile __USBHS_CSR0H_HOST_t CSR0H_HOSTbits; + }; + }; + + struct + { + union + { + volatile __USBHS_TXCSRL_DEVICE_t TXCSRL_DEVICEbits; + volatile __USBHS_TXCSRL_HOST_t TXCSRL_HOSTbits; + }; + + union + { + volatile __USBHS_TXCSRH_DEVICE_t TXCSRH_DEVICEbits; + volatile __USBHS_TXCSRH_HOST_t TXCSRH_HOSTbits; + }; + }; + }; + + volatile __USBHS_RXMAXP_t RXMAXPbits; + + union + { + volatile __USBHS_RXCSRL_DEVICE_t RXCSRL_DEVICEbits; + volatile __USBHS_RXCSRL_HOST_t RXCSRL_HOSTbits; + }; + + union + { + volatile __USBHS_RXCSRH_DEVICE_t RXCSRH_DEVICEbits; + volatile __USBHS_RXCSRH_HOST_t RXCSRH_HOSTbits; + }; + + union + { + volatile __USBHS_COUNT0_t COUNT0bits; + volatile __USBHS_RXCOUNT_t RXCOUNTbits; + }; + + union + { + volatile __USBHS_TYPE0_t TYPE0bits; + volatile __USBHS_TXTYPE_t TXTYPEbits; + }; + + union + { + volatile uint8_t NAKLIMIT0; + volatile __USBHS_TXINTERVAL_t TXINTERVALbits; + }; + + volatile __USBHS_RXTYPE_t RXTYPEbits; + volatile __USBHS_RXINTERVAL_t RXINTERVALbits; + unsigned :8; + union + { + volatile uint8_t CONFIGDATA; + volatile uint8_t FIFOSIZE; + }; + +} __USBHS_EPCSR_t; + +/* Set of registers that configure the multi-point option */ +typedef struct __attribute__((packed)) +{ + volatile __USBHS_TXFUNCADDR_t TXFUNCADDRbits; + unsigned :8; + volatile __USBHS_TXHUBADDR_t TXHUBADDRbits; + volatile __USBHS_TXHUBPORT_t TXHUBPORTbits; + volatile __USBHS_RXFUNCADDR_t RXFUNCADDRbits; + unsigned :8; + volatile __USBHS_RXHUBADDR_t RXHUBADDRbits; + volatile __USBHS_RXHUBPORT_t RXHUBPORTbits; + +} __USBHS_TARGET_ADDR_t; + +/* Set of registers that configure the DMA channel */ +typedef struct __attribute__((packed)) +{ + volatile __USBHS_DMACNTL_t DMACNTLbits; + volatile uint32_t DMAADDR; + volatile uint32_t DMACOUNT; + volatile uint32_t pad; +} __USBHS_DMA_CHANNEL_t; + +/* USBHS module register set */ +typedef struct __attribute__((aligned(4),packed)) +{ + volatile __USBHS_FADDR_t FADDRbits; + volatile __USBHS_POWER_t POWERbits; + volatile uint16_t INTRTX; + volatile uint16_t INTRRX; + volatile __USBHS_INTRTXE_t INTRTXEbits; + volatile __USBHS_INTRRXE_t INTRRXEbits; + volatile uint8_t INTRUSB; + volatile __USBHS_INTRUSBE_t INTRUSBEbits; + volatile __USBHS_FRAME_t FRAMEbits; + volatile __USBHS_INDEX_t INDEXbits; + volatile __USBHS_TESTMODE_t TESTMODEbits; + volatile __USBHS_EPCSR_t INDEXED_EPCSR; + volatile uint32_t FIFO[16]; + volatile __USBHS_DEVCTL_t DEVCTLbits; + volatile uint8_t MISC; + volatile __USBHS_TXFIFOSZ_t TXFIFOSZbits; + volatile __USBHS_RXFIFOSZ_t RXFIFOSZbits; + + volatile __USBHS_TXFIFOADD_t TXFIFOADDbits; + volatile __USBHS_RXFIFOADD_t RXFIFOADDbits; + + volatile uint32_t VCONTROL; + volatile uint16_t HWVERS; + volatile uint8_t padding1[10]; + volatile uint8_t EPINFO; + volatile uint8_t RAMINFO; + volatile uint8_t LINKINFO; + volatile uint8_t VPLEN; + volatile uint8_t HS_EOF1; + volatile uint8_t FS_EOF1; + volatile uint8_t LS_EOF1; + + volatile __USBHS_SOFTRST_t SOFTRSTbits; + + volatile __USBHS_TARGET_ADDR_t TADDR[16]; + volatile __USBHS_EPCSR_t EPCSR[16]; + volatile uint32_t DMA_INTR; + volatile __USBHS_DMA_CHANNEL_t DMA_CHANNEL[8]; + volatile uint32_t RQPKTXOUNT[16]; + +} usbhs_registers_t; + +#endif diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 2bcd56b8a..ed597a34f 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -1059,7 +1059,13 @@ void tusb_hal_nrf_power_event (uint32_t event) // Enable interrupt, priorities should be set by application NVIC_ClearPendingIRQ(USBD_IRQn); - NVIC_EnableIRQ(USBD_IRQn); + // Don't enable USBD interrupt yet, if dcd_init() did not finish yet + // Interrupt will be enabled by tud_init(), when USB stack is ready + // to handle interrupts. + if (tud_inited()) + { + NVIC_EnableIRQ(USBD_IRQn); + } // Wait for HFCLK while ( !hfclk_running() ) { } diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c index e084478e0..42add3167 100644 --- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -83,7 +83,7 @@ static void _hw_endpoint_alloc(struct hw_endpoint *ep, uint8_t transfer_type) assert(((uintptr_t )next_buffer_ptr & 0b111111u) == 0); uint dpram_offset = hw_data_offset(ep->hw_data_buf); - assert(hw_data_offset(next_buffer_ptr) <= USB_DPRAM_MAX); + hard_assert(hw_data_offset(next_buffer_ptr) <= USB_DPRAM_MAX); pico_info(" Alloced %d bytes at offset 0x%x (0x%p)\r\n", size, dpram_offset, ep->hw_data_buf); @@ -93,7 +93,6 @@ static void _hw_endpoint_alloc(struct hw_endpoint *ep, uint8_t transfer_type) *ep->endpoint_control = reg; } -#if 0 // todo unused static void _hw_endpoint_close(struct hw_endpoint *ep) { // Clear hardware registers and then zero the struct @@ -103,6 +102,21 @@ static void _hw_endpoint_close(struct hw_endpoint *ep) *ep->buffer_control = 0; // Clear any endpoint state memset(ep, 0, sizeof(struct hw_endpoint)); + + // Reclaim buffer space if all endpoints are closed + bool reclaim_buffers = true; + for ( uint8_t i = 1; i < USB_MAX_ENDPOINTS; i++ ) + { + if (hw_endpoint_get_by_num(i, TUSB_DIR_OUT)->hw_data_buf != NULL || hw_endpoint_get_by_num(i, TUSB_DIR_IN)->hw_data_buf != NULL) + { + reclaim_buffers = false; + break; + } + } + if (reclaim_buffers) + { + next_buffer_ptr = &usb_dpram->epx_data[0]; + } } static void hw_endpoint_close(uint8_t ep_addr) @@ -110,7 +124,6 @@ static void hw_endpoint_close(uint8_t ep_addr) struct hw_endpoint *ep = hw_endpoint_get_by_addr(ep_addr); _hw_endpoint_close(ep); } -#endif static void hw_endpoint_init(uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t transfer_type) { @@ -224,6 +237,8 @@ static void reset_non_control_endpoints(void) // clear non-control hw endpoints tu_memclr(hw_endpoints[1], sizeof(hw_endpoints) - 2*sizeof(hw_endpoint_t)); + + // reclaim buffer space next_buffer_ptr = &usb_dpram->epx_data[0]; } @@ -232,6 +247,14 @@ static void dcd_rp2040_irq(void) uint32_t const status = usb_hw->ints; uint32_t handled = 0; + // xfer events are handled before setup req. So if a transfer completes immediately + // before closing the EP, the events will be delivered in same order. + if (status & USB_INTS_BUFF_STATUS_BITS) + { + handled |= USB_INTS_BUFF_STATUS_BITS; + hw_handle_buff_status(); + } + if (status & USB_INTS_SETUP_REQ_BITS) { handled |= USB_INTS_SETUP_REQ_BITS; @@ -245,12 +268,6 @@ static void dcd_rp2040_irq(void) usb_hw_clear->sie_status = USB_SIE_STATUS_SETUP_REC_BITS; } - if (status & USB_INTS_BUFF_STATUS_BITS) - { - handled |= USB_INTS_BUFF_STATUS_BITS; - hw_handle_buff_status(); - } - #if FORCE_VBUS_DETECT == 0 // Since we force VBUS detect On, device will always think it is connected and // couldn't distinguish between disconnect and suspend @@ -479,10 +496,9 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr) { (void) rhport; - (void) ep_addr; - // usbd.c says: In progress transfers on this EP may be delivered after this call pico_trace("dcd_edpt_close %02x\n", ep_addr); + hw_endpoint_close(ep_addr); } void dcd_int_handler(uint8_t rhport) diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c index c9e2f6b26..9d833e65f 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.c +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c @@ -294,7 +294,7 @@ bool hw_endpoint_xfer_continue(struct hw_endpoint *ep) // Part way through a transfer if (!ep->active) { - panic("Can't continue xfer on inactive ep %d %s", tu_edpt_number(ep->ep_addr), ep_dir_string); + panic("Can't continue xfer on inactive ep %d %s", tu_edpt_number(ep->ep_addr), ep_dir_string[tu_edpt_dir(ep->ep_addr)]); } // Update EP struct from hardware state diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index bb21b3dcd..188611743 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -33,7 +33,8 @@ #if TUSB_OPT_DEVICE_ENABLED && \ ( defined(DCD_ATTR_DWC2_STM32) || \ TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_GD32VF103) || \ - TU_CHECK_MCU(OPT_MCU_EFM32GG, OPT_MCU_BCM2711, OPT_MCU_XMC4000) ) + TU_CHECK_MCU(OPT_MCU_EFM32GG, OPT_MCU_BCM2711, OPT_MCU_BCM2835) || \ + TU_CHECK_MCU(OPT_MCU_BCM2837, OPT_MCU_XMC4000) ) #include "device/dcd.h" #include "dwc2_type.h" @@ -44,7 +45,7 @@ #include "dwc2_esp32.h" #elif TU_CHECK_MCU(OPT_MCU_GD32VF103) #include "dwc2_gd32.h" -#elif TU_CHECK_MCU(OPT_MCU_BCM2711) +#elif TU_CHECK_MCU(OPT_MCU_BCM2711, OPT_MCU_BCM2835, OPT_MCU_BCM2837) #include "dwc2_bcm.h" #elif TU_CHECK_MCU(OPT_MCU_EFM32GG) #include "dwc2_efm32.h" diff --git a/src/portable/synopsys/dwc2/dwc2_bcm.h b/src/portable/synopsys/dwc2/dwc2_bcm.h index 353bc21ee..14194e754 100644 --- a/src/portable/synopsys/dwc2/dwc2_bcm.h +++ b/src/portable/synopsys/dwc2/dwc2_bcm.h @@ -31,6 +31,7 @@ extern "C" { #endif +#include "broadcom/defines.h" #include "broadcom/interrupts.h" #include "broadcom/caches.h" @@ -47,7 +48,6 @@ static inline void dwc2_dcd_int_enable(uint8_t rhport) { (void) rhport; BP_EnableIRQ(USB_IRQn); - __asm__ volatile("isb"); // needed if TIMER1 IRQ is not enabled !? } TU_ATTR_ALWAYS_INLINE @@ -55,7 +55,6 @@ static inline void dwc2_dcd_int_disable (uint8_t rhport) { (void) rhport; BP_DisableIRQ(USB_IRQn); - __asm__ volatile("isb"); // needed if TIMER1 IRQ is not enabled !? } static inline void dwc2_remote_wakeup_delay(void) diff --git a/src/portable/valentyusb/eptri/dcd_eptri.c b/src/portable/valentyusb/eptri/dcd_eptri.c index 837d0c0ce..51fb8b401 100644 --- a/src/portable/valentyusb/eptri/dcd_eptri.c +++ b/src/portable/valentyusb/eptri/dcd_eptri.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +#include "tusb_option.h" + +#if TUSB_OPT_DEVICE_ENABLED && (CFG_TUSB_MCU == OPT_MCU_VALENTYUSB_EPTRI) + #ifndef DEBUG #define DEBUG 0 #endif @@ -32,10 +36,6 @@ #define LOG_USB 0 #endif -#include "tusb_option.h" - -#if TUSB_OPT_DEVICE_ENABLED && (CFG_TUSB_MCU == OPT_MCU_VALENTYUSB_EPTRI) - #include "device/dcd.h" #include "dcd_eptri.h" #include "csr.h" diff --git a/src/tusb_option.h b/src/tusb_option.h index 54e46996d..4815e81cb 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -132,13 +132,18 @@ // Broadcom #define OPT_MCU_BCM2711 1700 ///< Broadcom BCM2711 +#define OPT_MCU_BCM2835 1701 ///< Broadcom BCM2835 +#define OPT_MCU_BCM2837 1702 ///< Broadcom BCM2837 // Infineon #define OPT_MCU_XMC4000 1800 ///< Infineon XMC4000 +// PIC +#define OPT_MCU_PIC32MZ 1900 ///< MicroChip PIC32MZ family + // BridgeTek -#define OPT_MCU_FT90X 1900 ///< BridgeTek FT90x -#define OPT_MCU_FT93X 1901 ///< BridgeTek FT93x +#define OPT_MCU_FT90X 2000 ///< BridgeTek FT90x +#define OPT_MCU_FT93X 2001 ///< BridgeTek FT93x // Helper to check if configured MCU is one of listed // Apply _TU_CHECK_MCU with || as separator to list of input diff --git a/tools/build_board.py b/tools/build_board.py index 9397c754f..b2a80c680 100644 --- a/tools/build_board.py +++ b/tools/build_board.py @@ -4,6 +4,8 @@ import sys import subprocess import time +import build_utils + SUCCEEDED = "\033[32msucceeded\033[0m" FAILED = "\033[31mfailed\033[0m" SKIPPED = "\033[33mskipped\033[0m" @@ -50,7 +52,7 @@ def build_board(example, board): sram_size = "-" # Check if board is skipped - if skip_example(example, board): + if build_utils.skip_example(example, board): success = SKIPPED skip_count += 1 print(build_format.format(example, board, success, '-', flash_size, sram_size)) @@ -82,33 +84,6 @@ def build_size(example, board): sram_size = int(size_list[1]) + int(size_list[2]) return (flash_size, sram_size) -def skip_example(example, board): - ex_dir = 'examples/' + example - board_mk = 'hw/bsp/{}/board.mk'.format(board) - with open(board_mk) as mk: - mk_contents = mk.read() - - # Skip all OPT_MCU_NONE these are WIP port - if '-DCFG_TUSB_MCU=OPT_MCU_NONE' in mk_contents: - return 1 - - # Skip if CFG_TUSB_MCU in board.mk to match skip file - for skip_file in glob.iglob(ex_dir + '/.skip.MCU_*'): - mcu_cflag = '-DCFG_TUSB_MCU=OPT_' + os.path.basename(skip_file).split('.')[2] - if mcu_cflag in mk_contents: - return 1 - - # Build only list, if exists only these MCU are built - only_list = list(glob.iglob(ex_dir + '/.only.MCU_*')) - if len(only_list) > 0: - for only_file in only_list: - mcu_cflag = '-DCFG_TUSB_MCU=OPT_' + os.path.basename(only_file).split('.')[2] - if mcu_cflag in mk_contents: - return 0 - return 1 - - return 0 - print(build_separator) print(build_format.format('Example', 'Board', '\033[39mResult\033[0m', 'Time', 'Flash', 'SRAM')) diff --git a/tools/build_esp32sx.py b/tools/build_esp32sx.py index 91953f080..2947a0a6b 100644 --- a/tools/build_esp32sx.py +++ b/tools/build_esp32sx.py @@ -4,6 +4,8 @@ import sys import subprocess import time +import build_utils + SUCCEEDED = "\033[32msucceeded\033[0m" FAILED = "\033[31mfailed\033[0m" SKIPPED = "\033[33mskipped\033[0m" @@ -51,7 +53,7 @@ def build_board(example, board): sram_size = "-" # Check if board is skipped - if skip_example(example, board): + if build_utils.skip_example(example, board): success = SKIPPED skip_count += 1 print(build_format.format(example, board, success, '-', flash_size, sram_size)) @@ -83,9 +85,6 @@ def build_size(example, board): sram_size = int(size_list[1]) + int(size_list[2]) return (flash_size, sram_size) -def skip_example(example, board): - return 0 - print(build_separator) print(build_format.format('Example', 'Board', '\033[39mResult\033[0m', 'Time', 'Flash', 'SRAM')) print(build_separator) diff --git a/tools/build_family.py b/tools/build_family.py index 4195c259b..4094d07db 100644 --- a/tools/build_family.py +++ b/tools/build_family.py @@ -4,6 +4,8 @@ import sys import subprocess import time +import build_utils + SUCCEEDED = "\033[32msucceeded\033[0m" FAILED = "\033[31mfailed\033[0m" SKIPPED = "\033[33mskipped\033[0m" @@ -38,7 +40,7 @@ all_examples.sort() # If family are not specified in arguments, build all all_families = [] for entry in os.scandir("hw/bsp"): - if entry.is_dir() and os.path.isdir(entry.path + "/boards") and entry.name != "esp32s2" and entry.name != "esp32s3": + if entry.is_dir() and os.path.isdir(entry.path + "/boards") and entry.name not in ("esp32s2", "esp32s3"): all_families.append(entry.name) filter_with_input(all_families) @@ -62,7 +64,7 @@ def build_board(example, board): sram_size = "-" # Check if board is skipped - if skip_example(example, board): + if build_utils.skip_example(example, board): success = SKIPPED skip_count += 1 print(build_format.format(example, board, success, '-', flash_size, sram_size)) @@ -95,46 +97,6 @@ def build_size(example, board): sram_size = int(size_list[1]) + int(size_list[2]) return (flash_size, sram_size) -def skip_example(example, board): - ex_dir = 'examples/' + example - - # Check if example is skipped by family or board directory - skip_file = ".skip." + example.replace('/', '.'); - if os.path.isfile("hw/bsp/{}/{}".format(family, skip_file)) or os.path.isfile("hw/bsp/{}/boards/{}/{}".format(family, board, skip_file)): - return 1 - - # Otherwise check if mcu is excluded by example directory - - # family CMake - family_mk = 'hw/bsp/{}/family.cmake'.format(family) - - # family.mk - if not os.path.exists(family_mk): - family_mk = 'hw/bsp/{}/family.mk'.format(family) - - with open(family_mk) as mk: - mk_contents = mk.read() - - # Skip all OPT_MCU_NONE these are WIP port - if 'CFG_TUSB_MCU=OPT_MCU_NONE' in mk_contents: - return 1 - - # Skip if CFG_TUSB_MCU in family.mk to match skip file - for skip_file in glob.iglob(ex_dir + '/.skip.MCU_*'): - mcu_cflag = 'CFG_TUSB_MCU=OPT_' + os.path.basename(skip_file).split('.')[2] - if mcu_cflag in mk_contents: - return 1 - - # Build only list, if exists only these MCU are built - only_list = list(glob.iglob(ex_dir + '/.only.MCU_*')) - if len(only_list) > 0: - for only_file in only_list: - mcu_cflag = 'CFG_TUSB_MCU=OPT_' + os.path.basename(only_file).split('.')[2] - if mcu_cflag in mk_contents: - return 0 - return 1 - return 0 - print(build_separator) print(build_format.format('Example', 'Board', '\033[39mResult\033[0m', 'Time', 'Flash', 'SRAM')) diff --git a/tools/build_utils.py b/tools/build_utils.py new file mode 100644 index 000000000..299fffa4d --- /dev/null +++ b/tools/build_utils.py @@ -0,0 +1,61 @@ +import pathlib + +def skip_example(example, board): + ex_dir = pathlib.Path('examples/') / example + bsp = pathlib.Path("hw/bsp") + + board_dir = list(bsp.glob("*/boards/" + board)) + if not board_dir: + # Skip unknown boards + return True + + board_dir = list(board_dir)[0] + + family_dir = board_dir.parent.parent + family = family_dir.name + + # family CMake + family_mk = family_dir / "family.cmake" + + # family.mk + if not family_mk.exists(): + family_mk = family_dir / "family.mk" + + mk_contents = family_mk.read_text() + + # Find the mcu + if "CFG_TUSB_MCU=OPT_MCU_" not in mk_contents: + board_mk = board_dir / "board.cmake" + if not board_mk.exists(): + board_mk = board_dir / "board.mk" + + mk_contents = board_mk.read_text() + + for token in mk_contents.split(): + if "CFG_TUSB_MCU=OPT_MCU_" in token: + # Strip " because cmake files has them. + token = token.strip("\"") + _, opt_mcu = token.split("=") + mcu = opt_mcu[len("OPT_MCU_"):] + + # Skip all OPT_MCU_NONE these are WIP port + if mcu == "NONE": + return True + + skip_file = ex_dir / "skip.txt" + only_file = ex_dir / "only.txt" + + if skip_file.exists() and only_file.exists(): + raise RuntimeError("Only have a skip or only file. Not both.") + elif skip_file.exists(): + skips = skip_file.read_text().split() + return ("mcu:" + mcu in skips or + "board:" + board in skips or + "family:" + family in skips) + elif only_file.exists(): + onlys = only_file.read_text().split() + return not ("mcu:" + mcu in onlys or + "board:" + board in onlys or + "family:" + family in onlys) + + return False |