diff options
| -rw-r--r-- | README.rst | 8 | ||||
| -rw-r--r-- | hw/bsp/lpc17/family.cmake | 1 | ||||
| -rw-r--r-- | hw/bsp/lpc17/family.mk | 1 | ||||
| -rw-r--r-- | hw/bsp/lpc40/family.cmake | 1 | ||||
| -rw-r--r-- | hw/bsp/lpc40/family.mk | 1 | ||||
| -rw-r--r-- | hw/bsp/lpc55/boards/double_m33_express/board.cmake | 5 | ||||
| -rw-r--r-- | hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake | 5 | ||||
| -rw-r--r-- | hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake | 5 | ||||
| -rw-r--r-- | hw/bsp/lpc55/family.c | 70 | ||||
| -rw-r--r-- | hw/bsp/lpc55/family.cmake | 47 | ||||
| -rw-r--r-- | src/common/tusb_mcu.h | 5 | ||||
| -rw-r--r-- | src/portable/ohci/ohci.c | 11 | ||||
| -rw-r--r-- | src/portable/ohci/ohci.h | 49 | ||||
| -rw-r--r-- | src/portable/ohci/ohci_nxp.h (renamed from src/portable/nxp/lpc17_40/hcd_lpc17_40.c) | 48 |
14 files changed, 161 insertions, 96 deletions
diff --git a/README.rst b/README.rst index 3ea1bd018..38ebcc8da 100644 --- a/README.rst +++ b/README.rst @@ -160,7 +160,7 @@ Supported CPUs | +-----------------------------+--------+------+-----------+------------------------+-------------------+ | | NUC505 | ✔ | | ✔ | nuc505 | | +--------------+---------+-------------------+--------+------+-----------+------------------------+-------------------+ -| NXP | iMXRT | RT 10xx, 11xx | ✔ | ✔ | ✔ | ci_hs | | +| NXP | iMXRT | RT 10xx, 11xx | ✔ | ✔ | ✔ | ci_hs, ehci | | | +---------+-------------------+--------+------+-----------+------------------------+-------------------+ | | Kinetis | KL | ✔ | ⚠ | ✖ | ci_fs, khci | | | | +-------------------+--------+------+-----------+------------------------+-------------------+ @@ -168,15 +168,15 @@ Supported CPUs | +---------+-------------------+--------+------+-----------+------------------------+-------------------+ | | LPC | 11u, 13, 15 | ✔ | ✖ | ✖ | lpc_ip3511 | | | | +-------------------+--------+------+-----------+------------------------+-------------------+ -| | | 17, 40 | ✔ | ⚠ | ✖ | lpc17_40 | | +| | | 17, 40 | ✔ | ⚠ | ✖ | lpc17_40, ohci | | | | +-------------------+--------+------+-----------+------------------------+-------------------+ -| | | 18, 43 | ✔ | ✔ | ✔ | ci_hs | | +| | | 18, 43 | ✔ | ✔ | ✔ | ci_hs, ehci | | | | +-------------------+--------+------+-----------+------------------------+-------------------+ | | | 51u | ✔ | ✖ | ✖ | lpc_ip3511 | | | | +-------------------+--------+------+-----------+------------------------+-------------------+ | | | 54, 55 | ✔ | | ✔ | lpc_ip3511 | | | +---------+-------------------+--------+------+-----------+------------------------+-------------------+ -| | MCX | N9 | ✔ | | ✔ | ci_fs, ci_hs | | +| | MCX | N9 | ✔ | | ✔ | ci_fs, ci_hs, ehci | | | | +-------------------+--------+------+-----------+------------------------+-------------------+ | | | A15 | ✔ | | | ci_fs | | +--------------+---------+-------------------+--------+------+-----------+------------------------+-------------------+ diff --git a/hw/bsp/lpc17/family.cmake b/hw/bsp/lpc17/family.cmake index 92bcbff21..919b8f3bc 100644 --- a/hw/bsp/lpc17/family.cmake +++ b/hw/bsp/lpc17/family.cmake @@ -69,7 +69,6 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/nxp/lpc17_40/dcd_lpc17_40.c - ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c ${TOP}/src/portable/ohci/ohci.c ) diff --git a/hw/bsp/lpc17/family.mk b/hw/bsp/lpc17/family.mk index e8d707ea5..f1ed1a7d0 100644 --- a/hw/bsp/lpc17/family.mk +++ b/hw/bsp/lpc17/family.mk @@ -20,7 +20,6 @@ LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs SRC_C += \ src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ - src/portable/nxp/lpc17_40/hcd_lpc17_40.c \ src/portable/ohci/ohci.c \ $(MCU_DIR)/../gcc/cr_startup_lpc175x_6x.c \ $(MCU_DIR)/src/chip_17xx_40xx.c \ diff --git a/hw/bsp/lpc40/family.cmake b/hw/bsp/lpc40/family.cmake index 211846444..01430bbb1 100644 --- a/hw/bsp/lpc40/family.cmake +++ b/hw/bsp/lpc40/family.cmake @@ -70,7 +70,6 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/nxp/lpc17_40/dcd_lpc17_40.c - ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c ${TOP}/src/portable/ohci/ohci.c ) diff --git a/hw/bsp/lpc40/family.mk b/hw/bsp/lpc40/family.mk index c72631235..c21923000 100644 --- a/hw/bsp/lpc40/family.mk +++ b/hw/bsp/lpc40/family.mk @@ -18,7 +18,6 @@ LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs # All source paths should be relative to the top level. SRC_C += \ src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ - src/portable/nxp/lpc17_40/hcd_lpc17_40.c \ src/portable/ohci/ohci.c \ $(MCU_DIR)/../gcc/cr_startup_lpc40xx.c \ $(MCU_DIR)/src/chip_17xx_40xx.c \ diff --git a/hw/bsp/lpc55/boards/double_m33_express/board.cmake b/hw/bsp/lpc55/boards/double_m33_express/board.cmake index 3324ce888..186655b5a 100644 --- a/hw/bsp/lpc55/boards/double_m33_express/board.cmake +++ b/hw/bsp/lpc55/boards/double_m33_express/board.cmake @@ -7,11 +7,6 @@ set(NXPLINK_DEVICE LPC55S69:LPCXpresso55S69) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/LPC55S69_cm33_core0_uf2.ld) -# Device port default to PORT1 Highspeed -if (NOT DEFINED PORT) - set(PORT 1) -endif() - function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC CPU_LPC55S69JBD100_cm33_core0 diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake index b3d0c3349..d935b70e6 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake +++ b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake @@ -5,11 +5,6 @@ set(JLINK_DEVICE LPC55S28) set(PYOCD_TARGET LPC55S28) set(NXPLINK_DEVICE LPC55S28:LPCXpresso55S28) -# Device port default to PORT1 Highspeed -if (NOT DEFINED PORT) - set(PORT 1) -endif() - function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC CPU_LPC55S28JBD100 diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake index b52ec2f9d..f46775b27 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake +++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake @@ -5,11 +5,6 @@ set(JLINK_DEVICE LPC55S69_M33_0) set(PYOCD_TARGET LPC55S69) set(NXPLINK_DEVICE LPC55S69:LPCXpresso55S69) -# Device port default to PORT1 Highspeed -if (NOT DEFINED PORT) - set(PORT 1) -endif() - function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC CPU_LPC55S69JBD100_cm33_core0 diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c index f0ded96a7..f1ef58926 100644 --- a/hw/bsp/lpc55/family.c +++ b/hw/bsp/lpc55/family.c @@ -55,6 +55,7 @@ #define IOCON_PIO_MODE_INACT 0x00u // No addition pin function #define IOCON_PIO_OPENDRAIN_DI 0x00u // Open drain is disabled #define IOCON_PIO_SLEW_STANDARD 0x00u // Standard mode, output slew rate control is enabled +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ #define IOCON_PIO_DIG_FUNC0_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC0) // Digital pin function 0 enabled #define IOCON_PIO_DIG_FUNC1_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC1) // Digital pin function 1 enabled @@ -197,13 +198,14 @@ void board_init(void) { USART_Init(UART_DEV, &uart_config, 12000000); #endif - // USB VBUS +#if (CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0) || (CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 0) /* PORT0 PIN22 configured as USB0_VBUS */ IOCON_PinMuxSet(IOCON, 0U, 22U, IOCON_PIO_DIG_FUNC7_EN); - -#if defined(BOARD_TUD_RHPORT) && BOARD_TUD_RHPORT == 0 // Port0 is Full Speed + NVIC_ClearPendingIRQ(USB0_IRQn); + NVIC_ClearPendingIRQ(USB0_NEEDCLK_IRQn); + /* Turn on USB0 Phy */ POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); @@ -212,21 +214,55 @@ void board_init(void) { RESET_PeripheralReset(kUSB0HSL_RST_SHIFT_RSTn); RESET_PeripheralReset(kUSB0HMR_RST_SHIFT_RSTn); - // Enable USB Clock Adjustments to trim the FRO for the full speed controller - ANACTRL->FRO192M_CTRL |= ANACTRL_FRO192M_CTRL_USBCLKADJ_MASK; - CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false); - CLOCK_AttachClk(kFRO_HF_to_USB0_CLK); + if (CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0) { + // Enable USB Clock Adjustments to trim the FRO for the full speed controller + ANACTRL->FRO192M_CTRL |= ANACTRL_FRO192M_CTRL_USBCLKADJ_MASK; + CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false); + CLOCK_AttachClk(kFRO_HF_to_USB0_CLK); + + /*According to reference manual, device mode setting has to be set by access usb host register */ + CLOCK_EnableClock(kCLOCK_Usbhsl0); // enable usb0 host clock + USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK; + CLOCK_DisableClock(kCLOCK_Usbhsl0); // disable usb0 host clock + /* enable USB Device clock */ + CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbfsSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); + } else { + const uint32_t port1_pin12_config = (/* Pin is configured as USB0_PORTPWRN */ + IOCON_PIO_FUNC4 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN12 (coords: 67) is configured as USB0_PORTPWRN */ + IOCON_PinMuxSet(IOCON, 1U, 12U, port1_pin12_config); - /*According to reference manual, device mode setting has to be set by access usb host register */ - CLOCK_EnableClock(kCLOCK_Usbhsl0); // enable usb0 host clock - USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK; - CLOCK_DisableClock(kCLOCK_Usbhsl0); // disable usb0 host clock + const uint32_t port0_pin28_config = (/* Pin is configured as USB0_OVERCURRENTN */ + IOCON_PIO_FUNC7 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN28 (coords: 66) is configured as USB0_OVERCURRENTN */ + IOCON_PinMuxSet(IOCON, 0U, 28U, port0_pin28_config); - /* enable USB Device clock */ - CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbfsSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); + CLOCK_EnableUsbfs0HostClock(kCLOCK_UsbfsSrcPll1, 48000000U); + USBFSH->PORTMODE &= ~USBFSH_PORTMODE_DEV_ENABLE_MASK; + } #endif -#if defined(BOARD_TUD_RHPORT) && BOARD_TUD_RHPORT == 1 +#if (CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1) || (CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 1) // Port1 is High Speed /* Turn on USB1 Phy */ @@ -266,9 +302,9 @@ void board_init(void) { // phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); // USBPHY->TX = phytx; - ARM_MPU_SetMemAttr(0, 0x44); // Normal memory, non-cacheable (inner and outer) - ARM_MPU_SetRegion(0, ARM_MPU_RBAR(0x40100000, ARM_MPU_SH_NON, 0, 1, 1), ARM_MPU_RLAR(0x40104000, 0)); - ARM_MPU_Enable(MPU_CTRL_PRIVDEFENA_Msk | MPU_CTRL_HFNMIENA_Msk); + ARM_MPU_SetMemAttr(0, 0x44); // Normal memory, non-cacheable (inner and outer) + ARM_MPU_SetRegion(0, ARM_MPU_RBAR(0x40100000, ARM_MPU_SH_NON, 0, 1, 1), ARM_MPU_RLAR(0x40104000, 0)); + ARM_MPU_Enable(MPU_CTRL_PRIVDEFENA_Msk | MPU_CTRL_HFNMIENA_Msk); #endif } diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 3477d9f10..1f18f9bad 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -12,22 +12,40 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS LPC55 CACHE INTERNAL "") -if (NOT DEFINED PORT) - set(PORT 0) -endif() +# ---------------------- +# Port & Speed Selection +# ---------------------- -# Host port will be the other port if available -set(HOST_PORT $<NOT:${PORT}>) +# default device port to USB1 highspeed, host to USB0 fullspeed +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif () +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif () + +# port 0 is fullspeed, port 1 is highspeed +set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) + +if (NOT DEFINED RHPORT_DEVICE_SPEED) + list(GET RHPORT_SPEED ${RHPORT_DEVICE} RHPORT_DEVICE_SPEED) +endif () +if (NOT DEFINED RHPORT_HOST_SPEED) + list(GET RHPORT_SPEED ${RHPORT_HOST} RHPORT_HOST_SPEED) +endif () + +cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) #------------------------------------ # Startup & Linker script #------------------------------------ if (NOT DEFINED LD_FILE_GNU) -set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) + set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) endif () set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED STARTUP_FILE_GNU) -set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) + set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) endif () set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) @@ -63,22 +81,20 @@ function(family_add_board BOARD_TARGET) ) target_compile_definitions(${BOARD_TARGET} PUBLIC CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\) - BOARD_TUD_RHPORT=${PORT} - BOARD_TUH_RHPORT=${HOST_PORT} + BOARD_TUD_RHPORT=${RHPORT_DEVICE} + BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} + BOARD_TUH_RHPORT=${RHPORT_HOST} + BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} __STARTUP_CLEAR_BSS ) # Port 0 is Fullspeed, Port 1 is Highspeed. Port1 controller can only access USB_SRAM - if (PORT EQUAL 1) + if (RHPORT_DEVICE EQUAL 1) target_compile_definitions(${BOARD_TARGET} PUBLIC - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - BOARD_TUH_MAX_SPEED=OPT_MODE_FULL_SPEED CFG_TUD_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\) ) - else () + elseif (RHPORT_HOST EQUAL 1) target_compile_definitions(${BOARD_TARGET} PUBLIC - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED - BOARD_TUH_MAX_SPEED=OPT_MODE_HIGH_SPEED CFG_TUH_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\) ) endif () @@ -98,6 +114,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/lib/sct_neopixel/sct_neopixel.c ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c + ${TOP}/src/portable/ohci/ohci.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 0b8ed1059..2ca14838b 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -64,6 +64,7 @@ #elif TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX) #define TUP_DCD_ENDPOINT_MAX 16 #define TUP_USBIP_OHCI + #define TUP_USBIP_OHCI_NXP #define TUP_OHCI_RHPORTS 2 #elif TU_CHECK_MCU(OPT_MCU_LPC51UXX) @@ -78,6 +79,10 @@ #elif TU_CHECK_MCU(OPT_MCU_LPC55) // TODO USB0 has 5, USB1 has 6 #define TUP_USBIP_IP3511 + #define TUP_USBIP_OHCI + #define TUP_USBIP_OHCI_NXP + #define TUP_OHCI_RHPORTS 1 // 1 downstream port + #define TUP_DCD_ENDPOINT_MAX 6 #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index f1689b5b4..a12f7d6ed 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -41,13 +41,16 @@ #include "host/usbh.h" #include "ohci.h" -// TODO remove -#include "chip.h" +#if defined(TUP_USBIP_OHCI_NXP) + #include "ohci_nxp.h" +#else + #error Unsupported OHCI IP +#endif //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ -#define OHCI_REG ((ohci_registers_t *) LPC_USB_BASE) + enum { OHCI_CONTROL_FUNCSTATE_RESET = 0, @@ -181,6 +184,8 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; (void) rh_init; + ohci_phy_init(rhport); + //------------- Data Structure init -------------// tu_memclr(&ohci_data, sizeof(ohci_data_t)); for(uint8_t i=0; i<32; i++) diff --git a/src/portable/ohci/ohci.h b/src/portable/ohci/ohci.h index 3366f15f7..38cc84858 100644 --- a/src/portable/ohci/ohci.h +++ b/src/portable/ohci/ohci.h @@ -192,10 +192,10 @@ typedef struct TU_ATTR_ALIGNED(256) { //--------------------------------------------------------------------+ typedef volatile struct { - uint32_t revision; + uint32_t revision; // 0x00 union { - uint32_t control; + uint32_t control; // 0x04 struct { uint32_t control_bulk_service_ratio : 2; uint32_t periodic_list_enable : 1; @@ -211,7 +211,7 @@ typedef volatile struct }; union { - uint32_t command_status; + uint32_t command_status; // 0x08 struct { uint32_t controller_reset : 1; uint32_t control_list_filled : 1; @@ -222,26 +222,24 @@ typedef volatile struct }command_status_bit; }; - uint32_t interrupt_status; - uint32_t interrupt_enable; - uint32_t interrupt_disable; - - uint32_t hcca; - uint32_t period_current_ed; - uint32_t control_head_ed; - uint32_t control_current_ed; - uint32_t bulk_head_ed; - uint32_t bulk_current_ed; - uint32_t done_head; - - uint32_t frame_interval; - uint32_t frame_remaining; - uint32_t frame_number; - uint32_t periodic_start; - uint32_t lowspeed_threshold; + uint32_t interrupt_status; // 0x0C + uint32_t interrupt_enable; // 0x10 + uint32_t interrupt_disable; // 0x14 + uint32_t hcca; // 0x18 + uint32_t period_current_ed; // 0x1C + uint32_t control_head_ed; // 0x20 + uint32_t control_current_ed; // 0x24 + uint32_t bulk_head_ed; // 0x28 + uint32_t bulk_current_ed; // 0x2C + uint32_t done_head; // 0x30 + uint32_t frame_interval; // 0x34 + uint32_t frame_remaining; // 0x38 + uint32_t frame_number; // 0x3C + uint32_t periodic_start; // 0x40 + uint32_t lowspeed_threshold; // 0x44 union { - uint32_t rh_descriptorA; + uint32_t rh_descriptorA; // 0x48 struct { uint32_t number_downstream_ports : 8; uint32_t power_switching_mode : 1; @@ -255,7 +253,7 @@ typedef volatile struct }; union { - uint32_t rh_descriptorB; + uint32_t rh_descriptorB; // 0x4C struct { uint32_t device_removable : 16; uint32_t port_power_control_mask : 16; @@ -263,9 +261,9 @@ typedef volatile struct }; union { - uint32_t rh_status; + uint32_t rh_status; // 0x50 struct { - uint32_t local_power_status : 1; // read Local Power Status; write: Clear Global Power + uint32_t local_power_status : 1; // read Local Power Status; write: Clear Global Power uint32_t over_current_indicator : 1; uint32_t : 13; uint32_t device_remote_wakeup_enable : 1; @@ -277,7 +275,8 @@ typedef volatile struct }; union { - uint32_t rhport_status[TUP_OHCI_RHPORTS]; + uint32_t rhport_status[TUP_OHCI_RHPORTS]; // 0x54 + struct { uint32_t current_connect_status : 1; uint32_t port_enable_status : 1; diff --git a/src/portable/nxp/lpc17_40/hcd_lpc17_40.c b/src/portable/ohci/ohci_nxp.h index fea3e2a66..9cba05e95 100644 --- a/src/portable/nxp/lpc17_40/hcd_lpc17_40.c +++ b/src/portable/ohci/ohci_nxp.h @@ -1,7 +1,7 @@ /* * The MIT License (MIT) * - * Copyright (c) 2019, Ha Thach (tinyusb.org) + * Copyright (c) 2025 Ha Thach (tinyusb.org) * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -23,26 +23,48 @@ * * This file is part of the TinyUSB stack. */ +#ifndef TUSB_OHCI_NXP_H +#define TUSB_OHCI_NXP_H -#include "tusb_option.h" - -#if CFG_TUH_ENABLED && \ - (CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX) +#if TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX) #include "chip.h" -#include "host/hcd.h" -#include "host/usbh.h" +#define OHCI_REG ((ohci_registers_t *) LPC_USB_BASE) -void hcd_int_enable(uint8_t rhport) -{ - (void) rhport; +void hcd_int_enable(uint8_t rhport) { + (void)rhport; NVIC_EnableIRQ(USB_IRQn); } -void hcd_int_disable(uint8_t rhport) -{ - (void) rhport; +void hcd_int_disable(uint8_t rhport) { + (void)rhport; NVIC_DisableIRQ(USB_IRQn); } +static void ohci_phy_init(uint8_t rhport) { + (void) rhport; +} + +#else + +#include "fsl_device_registers.h" + +// for LPC55 USB0 controller +#define OHCI_REG ((ohci_registers_t *) USBFSH_BASE) + +static void ohci_phy_init(uint8_t rhport) { + (void) rhport; +} + +void hcd_int_enable(uint8_t rhport) { + (void)rhport; + NVIC_EnableIRQ(USB0_IRQn); +} + +void hcd_int_disable(uint8_t rhport) { + (void)rhport; + NVIC_DisableIRQ(USB0_IRQn); +} +#endif + #endif |