diff options
| -rw-r--r-- | hw/bsp/lpc54/boards/lpcxpresso54628/board.h | 59 | ||||
| -rw-r--r-- | hw/bsp/lpc54/boards/lpcxpresso54628/board.mk | 18 | ||||
| -rw-r--r-- | hw/bsp/lpc54/family.c | 48 | ||||
| -rw-r--r-- | hw/bsp/lpc54/family.mk | 10 |
4 files changed, 130 insertions, 5 deletions
diff --git a/hw/bsp/lpc54/boards/lpcxpresso54628/board.h b/hw/bsp/lpc54/boards/lpcxpresso54628/board.h new file mode 100644 index 000000000..670277512 --- /dev/null +++ b/hw/bsp/lpc54/boards/lpcxpresso54628/board.h @@ -0,0 +1,59 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT 2 +#define LED_PIN 2 +#define LED_STATE_ON 0 + +// WAKE button +#define BUTTON_PORT 1 +#define BUTTON_PIN 1 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_DEV USART0 +#define UART_RX_PINMUX 0, 29, IOCON_PIO_DIG_FUNC1_EN +#define UART_TX_PINMUX 0, 30, IOCON_PIO_DIG_FUNC1_EN + +// USB0 VBUS +#define USB0_VBUS_PINMUX 0, 22, IOCON_PIO_DIG_FUNC7_EN + +// XTAL +//#define XTAL0_CLK_HZ (16 * 1000 * 1000U) + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk b/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk new file mode 100644 index 000000000..925374cc8 --- /dev/null +++ b/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk @@ -0,0 +1,18 @@ +MCU_VARIANT = LPC54628 +MCU_CORE = LPC54628 + +PORT ?= 0 + +CFLAGS += -DCPU_LPC54628J512ET180 +CFLAGS += -Wno-error=double-promotion + +LD_FILE = $(MCU_DIR)/gcc/LPC54628J512_flash.ld + +LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_hardabi.a + +JLINK_DEVICE = LPC54628J512 +PYOCD_TARGET = LPC54628 + +#flash: flash-pyocd + +flash: flash-jlink
\ No newline at end of file diff --git a/hw/bsp/lpc54/family.c b/hw/bsp/lpc54/family.c index b1e2ca356..4789425a3 100644 --- a/hw/bsp/lpc54/family.c +++ b/hw/bsp/lpc54/family.c @@ -63,6 +63,11 @@ void USB0_IRQHandler(void) tud_int_handler(0); } +void USB1_IRQHandler(void) +{ + tud_int_handler(1); +} + /**************************************************************** name: BOARD_BootClockFROHF96M outputs: @@ -112,15 +117,15 @@ void board_init(void) #endif // Init all GPIO ports 54114 only has 2 ports. - GPIO_PortInit(GPIO, 0); - GPIO_PortInit(GPIO, 1); - //GPIO_PortInit(GPIO, 2); + GPIO_PortInit(GPIO, LED_PORT); + GPIO_PortInit(GPIO, BUTTON_PORT); // LED IOCON_PinMuxSet(IOCON, LED_PORT, LED_PIN, IOCON_PIO_DIG_FUNC0_EN); gpio_pin_config_t const led_config = { kGPIO_DigitalOutput, 0}; GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config); - board_led_write(true); + + board_led_write(0); // Button IOCON_PinMuxSet(IOCON, BUTTON_PORT, BUTTON_PIN, IOCON_PIO_DIG_FUNC0_EN | IOCON_PIO_MODE_PULLUP); @@ -145,8 +150,41 @@ void board_init(void) // USB IOCON_PinMuxSet(IOCON, USB0_VBUS_PINMUX); - POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); /*Turn on USB Phy */ +#if defined(FSL_FEATURE_SOC_USBHSD_COUNT) && FSL_FEATURE_SOC_USBHSD_COUNT + // LPC546xx and LPC540xx has OTG 1 FS + 1 HS rhports + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + // Port0 is Full Speed + POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); /*< Turn on USB Phy */ + CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false); + CLOCK_AttachClk(kFRO_HF_to_USB0_CLK); + + /*According to reference mannual, device mode setting has to be set by access usb host register */ + CLOCK_EnableClock(kCLOCK_Usbhsl0); /* enable usb0 host clock */ + USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK; + CLOCK_DisableClock(kCLOCK_Usbhsl0); /* disable usb0 host clock */ + + CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbSrcFro, CLOCK_GetFroHfFreq()); + #endif + + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + // Port1 is High Speed + POWER_DisablePD(kPDRUNCFG_PD_USB1_PHY); + + /*According to reference mannual, device mode setting has to be set by access usb host register */ + CLOCK_EnableClock(kCLOCK_Usbh1); /* enable usb1 host clock */ + USBHSH->PORTMODE |= USBHSH_PORTMODE_DEV_ENABLE_MASK; + CLOCK_DisableClock(kCLOCK_Usbh1); /* enable usb1 host clock */ + + CLOCK_EnableUsbhs0DeviceClock(kCLOCK_UsbSrcUsbPll, 0U); + #endif + +#else + // LPC5411x series only has full speed device + + POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); // Turn on USB Phy CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); /* enable USB IP clock */ +#endif } //--------------------------------------------------------------------+ diff --git a/hw/bsp/lpc54/family.mk b/hw/bsp/lpc54/family.mk index 26fbfc54c..600df6fd0 100644 --- a/hw/bsp/lpc54/family.mk +++ b/hw/bsp/lpc54/family.mk @@ -13,6 +13,16 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_LPC54XXX \ -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' +ifeq ($(PORT), 1) + $(info "PORT1 High Speed") + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + + # LPC55 Highspeed Port1 can only write to USB_SRAM region + CFLAGS += -DCFG_TUSB_MEM_SECTION='__attribute__((section("m_usb_global")))' +else + $(info "PORT0 Full Speed") +endif + # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter |