1 files changed, 0 insertions, 79 deletions
diff --git a/docs/changelog/0.14.0.rst b/docs/changelog/0.14.0.rst
deleted file mode 100644
index 421e6d8d5..000000000
--- a/docs/changelog/0.14.0.rst
+++ /dev/null
@@ -1,79 +0,0 @@
-0.14.0
-======
-
-- Improve compiler support for CCRX and IAR
-- Add timeout to ``osal_queue_receive()``
-- Add ``tud_task_ext(timeout, in_isr)`` as generic version of ``tud_task()``. Same as ``tuh_task_ext()``, ``tuh_task()``
-- Enable more warnings ``-Wnull-dereference -Wuninitialized -Wunused -Wredundant-decls -Wconversion``
-
-Add new examples
-^^^^^^^^^^^^^^^^
-
-- ``host/bare_api`` to demonstrate generic (app-level) enumeration and endpoint transfer
-- ``dual/host_hid_to_device_cdc`` to run both device and host stack concurrently, get HID report from host and print out to device CDC. This example only work with multiple-controller MCUs and rp2040 with the help of pio-usb as added controller.
-
-Controller Driver (DCD & HCD)
------------------------------
-
-- Enhance rhports management to better support dual roles
-
-  - ``CFG_TUD_ENABLED``/``CFG_TUH_ENABLED``, ``CFG_TUD_MAX_SPEED``/``CFG_TUH_MAX_SPEED`` can be used to replace ``CFG_TUSB_RHPORT0_MODE``/``CFG_TUSB_RHPORT1_MODE``
-  - ``tud_init(rphort)``, ``tuh_init(rhport)`` can be used to init stack on specified roothub port (controller) instead of ``tusb_init(void)``
-- Add dcd/hcd port specific defines ``TUP_`` (stand for tinyusb port-specific)
-
-dwc2
-^^^^
-
-- Update to support stm32 h72x, h73x with only 1 otg controller
-- Fix overwrite with grstctl when disable endpoint
-
-- [EHCI] Fix an issue with EHCI driver
-- [msp430] Fix for possible bug in msp430-elf-gcc 9.3.0
-- [nrf5x] Fix DMA access race condition using atomic function
-- [pic32] Fix PIC32 sanity
-
-rp2040
-^^^^^^
-
-- Add PICO-PIO-USB as controller (device/host) support for rp2040
-- Use shared IRQ handlers, so user can also hook the USB IRQ
-- Fix resumed signal not reported to device stack
-
-- [stm32fsdev] Add support for stm32wb55
-
-Device Stack
-------------
-
-- [Audio] Add support for feedback endpoint computation
-
-  - New API ``tud_audio_feedback_params_cb()``, ``tud_audio_feedback_interval_isr()``.
-  - Supported computation method are: frequency with fixed/float or power of 2. Feedback with fifo count is not yet supported.
-  - Fix nitfs (should be 3) in ``TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR``
-  - Fix typo in ``audiod_rx_done_cb()``
-
-- [DFU] Fix coexistence with other interfaces BTH, RNDIS
-- [MSC] Fix inquiry response additional length field
-- [Vendor] Improve write performance
-
-Host Stack
-----------
-
-- Add new API ``tuh_configure(rhport, cfg_id, cfg_param)`` for dynamic port specific behavior configuration
-- [HID] Open OUT endpoint if available
-- [Hub] hub clear port and device interrupts
-
-[USBH] Major improvement
-^^^^^^^^^^^^^^^^^^^^^^^^
-
-- Rework usbh control transfer with complete callback. New API ``tuh_control_xfer()`` though still only carry 1 usbh (no queueing) at a time.
-- Add generic endpoint transfer with ``tuh_edpt_open()``, ``tuh_edpt_xfer()``. Require ``CFG_TUH_API_EDPT_XFER=1``
-- Support app-level enumeration with new APIs
-
-  - ``tuh_descriptor_get()``, ``tuh_descriptor_get_device()``, ``tuh_descriptor_get_configuration()``, ``tuh_descriptor_get_hid_report()``
-  - ``tuh_descriptor_get_string()``, ``tuh_descriptor_get_manufacturer_string()``, ``tuh_descriptor_get_product_string()``, ``tuh_descriptor_get_serial_string()``
-  - Also add ``_sync()`` as sync/blocking version for above APIs
-
-Contributors
-------------
-
-Thanks to everyone who contributed to this release: @alexandre-perrin, @ccrome, @cr1901, @Daft-Freak, @Firefishy, @hathach, @iabdalkader, @Iktek, @kasjer, @kilograham, @liamfraser, @M3gaFr3ak, @maddyaby, @majbthrd, @mingpepe, @Nikitarc, @perigoso, @phryniszak, @pigrew, @Qianhao2579, @robert-hh, @Ryzee119, @sjanc, @sknebel, @tannewt, @tfx2001, @Wini-Buh, @yoyopod.