1 files changed, 216 insertions, 0 deletions
diff --git a/docs/changelog/0.19.0.md b/docs/changelog/0.19.0.md
new file mode 100644
index 000000000..d3e73db22
--- /dev/null
+++ b/docs/changelog/0.19.0.md
@@ -0,0 +1,216 @@
+# 0.19.0
+
+*October 6, 2025*
+
+## General
+
+### New MCUs and Boards
+
+- Add ESP32-H4, ESP32-C5, ESP32-C61 support
+- Add STM32U0, STM32WBA, STM32N6
+- Add AT32F405, AT32F403A, AT32F415, AT32F423 support
+- Add CH32V305 support and CH32V20x USB host support
+- Add MCXA156 SDK 2.16 support and FRDM-MCXA156 board
+
+## API Changes
+
+### Core APIs
+
+- Add weak callbacks with new syntax for better compiler compatibility
+- Add `tusb_deinit()` to cleanup stack
+- Add time functions: `tusb_time_millis_api()` and `tusb_time_delay_ms_api()`
+- Add `osal_critical` APIs for critical section handling
+- Introduce `xfer_isr()` callback for ISO transfer optimization in device classes
+
+### Device APIs
+
+- CDC: Add notification support `tud_cdc_configure()`, `tud_cdc_n_notify_uart_state()`,
+  `tud_cdc_n_notify_conn_speed_change()`, `tud_cdc_notify_complete_cb()`
+- MSC: Add `tud_msc_inquiry2_cb()` with bufsize parameter, update `tud_msc_async_io_done()`
+  with `in_isr` parameter
+- Audio: Add `tud_audio_n_mounted()` and various FIFO access functions
+- MTP: Add `tud_mtp_mounted()`, `tud_mtp_data_send()`, `tud_mtp_data_receive()`,
+  `tud_mtp_response_send()`, `tud_mtp_event_send()`
+
+### Host APIs
+
+- Core: Add `tuh_edpt_close()`, `tuh_address_set()`, `tuh_descriptor_get_device_local()`,
+  `tuh_descriptor_get_string_langid()`, `tuh_connected()`, `tuh_bus_info_get()`
+- Add enumeration callbacks: `tuh_enum_descriptor_device_cb()`,
+  `tuh_enum_descriptor_configuration_cb()`
+- CDC: Add `tuh_cdc_get_control_line_state_local()`, `tuh_cdc_get/set_dtr/rts()`,
+  `tuh_cdc_connect/disconnect()` and sync versions of all control APIs
+- MIDI: Add `tuh_midi_itf_get_info()`, `tuh_midi_packet_read_n()`,
+  `tuh_midi_packet_write_n()`, `tuh_midi_read_available()`, `tuh_midi_write_flush()`,
+  `tuh_midi_descriptor_cb()`
+
+## Controller Driver (DCD & HCD)
+
+### DWC2
+
+- Support DWC2 v4.30a with improved reset procedure
+- Fix core reset: wait for AHB idle before reset
+- Add STM32 DWC2 data cache support with proper alignment
+- Host improvements:
+  - Fix disconnect detection and SOF flag handling
+  - Fix HFIR timing off-by-one error
+  - Retry IN token immediately for bInterval=1
+  - Proper attach debouncing (200ms)
+  - Fix all retry intervals
+  - Resume OUT transfer when PING ACKed
+- Fix enumeration racing conditions
+- Refactor bitfields for better code generation
+
+### FSDEV (STM32)
+
+- Fix AT32 compile issues after single-buffered endpoint changes
+- Add configurable single-buffered isochronous endpoints
+- Fix STM32H7 recurrent suspend ISR
+- Fix STM32L4 GPIOD clock enable for variants without GPIOD
+- Fix STM32 PHYC PLL stability wait
+- Improve PMA size handling for STM32U0
+
+### EHCI
+
+- Fix removed QHD getting reused
+- Fix NXP USBPHY disconnection detection
+
+### Chipidea/NXP
+
+- Fix race condition with spinlock
+- Improve iMXRT support: fix build, disable BOARD_ConfigMPU, fix attach debouncing on port1 highspeed
+- Fix iMXRT1064 and add to HIL test pool
+
+### MAX3421E
+
+- Use spinlock for thread safety instead of atomic flag
+- Implement `hcd_edpt_close()`
+
+### RP2040
+
+- Fix audio ISO transfer: reset state before notifying stack
+- Fix CMake RTOS cache variable
+- Abort transfer if active in `iso_activate()`
+
+### SAMD
+
+- Add host controller driver support
+
+## Device Stack
+
+### USBD Core
+
+- Introduce `xfer_isr()` callback for interrupt-time transfer handling
+- Add `usbd_edpt_xfer_fifo()` stub
+- Revert endpoint busy/claim status if `xfer_isr()` defers to `xfer_cb()`
+
+### Audio
+
+- Major simplification of UAC driver and alt settings management
+- Move ISO transfers into `xfer_isr()` for better performance
+- Remove FIFO mutex (single producer/consumer optimization)
+- Add implicit feedback support for data IN endpoints
+- Fix alignment issues
+- Update buffer macros with cache line size alignment
+
+### CDC
+
+- Add notification support: `CFG_TUD_CDC_NOTIFY`, `tud_cdc_n_notify_conn_speed_change()`, `tud_cdc_notify_complete_cb()`
+- Reduce default bInterval from 16ms to 1ms for better responsiveness
+- Rename `tud_cdc_configure_fifo()` to `tud_cdc_configure()` and add `tx_overwritable_if_not_connected` option
+- Fix web serial robustness with major overhaul and logic cleanup
+
+### HID
+
+- Add Usage Page and Table for Power Devices (0x84 - 0x85)
+- Fix HID descriptor parser variable size and 4-byte item handling
+- Add consumer page configurations
+
+### MIDI
+
+- Fix MIDI interface descriptor handling after audio streaming interface
+- Skip RX data with all zeroes
+
+### MSC
+
+- Add async I/O support for MSC using `tud_msc_async_io_done()`
+- Add `tud_msc_inquiry2_cb()` with bufsize for full inquiry response
+
+### MTP
+
+- Add new Media Transfer Protocol (MTP) device class driver
+- Support MTP operations: GetDeviceInfo, SendObjectInfo, SendObject
+- Add MTP event support with `tud_mtp_event_send()`
+- Implement filesystem example with callbacks
+- Add hardware-in-the-loop testing support
+
+### NCM
+
+- Add USB NCM link state control support
+- Fix DHCP offer/ACK destination
+
+### USBTMC
+
+- Add vendor-specific message support
+
+### Vendor
+
+- Fix vendor device reset and open issues
+- Fix descriptor parsing for `CFG_TUD_VENDOR > 1`
+- Fix vendor FIFO argument calculation
+
+## Host Stack
+
+### USBH Core
+
+- Major enumeration improvements:
+  - Fix enumeration racing conditions
+  - Add proper attach debouncing with hub/rootport handling (200ms delay)
+  - Reduce `ENUM_DEBOUNCING_DELAY_MS` to 200ms
+  - Always get language ID, manufacturer, product, and serial strings during enumeration
+  - Always get first 2 bytes of string descriptor to determine length (prevents buffer overflow)
+  - Support devices with multiple configurations
+- Add `tuh_enum_descriptor_device_cb()` and `tuh_enum_descriptor_configuration_cb()` callbacks
+- Add `tuh_descriptor_get_string_langid()` API
+- Hub improvements:
+  - Check status before getting first device descriptor
+  - Properly handle port status and change detection
+  - Queue status endpoint for detach/remove events
+  - Fix hub status change endpoint handling
+- Fix endpoint management:
+  - `hcd_edpt_open()` returns false if endpoint already opened
+  - Add `hcd_edpt_close()` implementation
+  - Abort pending transfers on close
+- Add roothub debouncing flag to ignore attach/remove during debouncing
+- Move address setting and bus info management to separate structures
+- Force removed devices in same bus info before setting address
+
+### CDC Serial Host
+
+- Major refactor to generalize CDC serial drivers (FTDI, CP210x, CH34x, PL2303, ACM)
+- Add explicit `sync()` API with `TU_API_SYNC()` returning `tusb_xfer_result_t`
+- Rename `tuh_cdc_get_local_line_coding()` to `tuh_cdc_get_line_coding_local()`
+- Add `tuh_cdc_get_control_line_state_local()`
+- Implement `tuh_cdc_get/set_dtr/rts()` as inline functions
+
+### MIDI Host
+
+- Major API changes:
+  - Rename `tuh_midi_stream_flush()` to `tuh_midi_write_flush()`
+  - Add `tuh_midi_packet_read_n()` and `tuh_midi_packet_write_n()`
+  - Add `CFG_TUH_MIDI_STREAM_API` to opt out of stream API
+  - Change API to use index instead of device address (supports multiple MIDI per device)
+- Rename `tuh_midi_get_num_rx/tx_cables()` to `tuh_midi_get_rx/tx_cable_count()`
+- Add `tuh_midi_descriptor_cb()` and `tuh_midi_itf_get_info()`
+
+### MSC Host
+
+- Continue async I/O improvements
+
+### HID Host
+
+- Fix version string to actually show version
+
+## Contributors
+
+Thanks to everyone who contributed to this release: @andrewleech, @armusin, @atoktoto, @byteit101, @ceedriic, @ChrisDeadman, @Cynventria, @dauc, @Dazza0, @deshipu, @Dolphindalt, @ehughes, @elipsitz, @fenugrec, @hathach, @HiFiPhile, @ho-ho-ho, @igi540, @IngHK, @Isoheptane, @james-advatek, @JannisKonradBecker, @jay94ks, @joelpmichael, @karlp, @kasjer, @ludoux, @majbthrd, @martijnvdwoude, @maximevince, @Milek7, @ning3270455369, @ohmdelta, @peppapighs, @pschatzmann, @PwnVerse, @raldone01, @ReimuNotMoe, @rhgndf, @roundby, @rppicomidi, @s09289728096, @salkinium, @tannewt, @terjr, @tore-espressif, @verylowfreq, @YixingShen, @ZakDanger.