diff options
Diffstat (limited to 'examples/device/audio_test_multi_rate/src/usb_descriptors.c')
| -rw-r--r-- | examples/device/audio_test_multi_rate/src/usb_descriptors.c | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.c b/examples/device/audio_test_multi_rate/src/usb_descriptors.c new file mode 100644 index 000000000..f50e70a25 --- /dev/null +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.c @@ -0,0 +1,185 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * Copyright (c) 2022 HiFiPhile + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "bsp/board_api.h" +#include "tusb.h" +#include "usb_descriptors.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + + // Use Interface Association Descriptor (IAD) for Audio + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ +enum +{ + ITF_NUM_AUDIO_CONTROL = 0, + ITF_NUM_AUDIO_STREAMING, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... + #define EPNUM_AUDIO 0x03 + +#elif TU_CHECK_MCU(OPT_MCU_NRF5X) + // nRF5x ISO can only be endpoint 8 + #define EPNUM_AUDIO 0x08 + +#else + #define EPNUM_AUDIO 0x01 +#endif + +uint8_t const desc_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_epin*/ 0x80 | EPNUM_AUDIO) +}; + +TU_VERIFY_STATIC(sizeof(desc_configuration) == CONFIG_TOTAL_LEN, "Incorrect size"); + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + return desc_configuration; +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// String Descriptor Index +enum { + STRID_LANGID = 0, + STRID_MANUFACTURER, + STRID_PRODUCT, + STRID_SERIAL, +}; + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "PaniRCorp", // 1: Manufacturer + "MicNode", // 2: Product + NULL, // 3: Serials will use unique ID if possible + "UAC2", // 4: Audio Interface + +}; + +static uint16_t _desc_str[32 + 1]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { + (void) langid; + size_t chr_count; + + switch ( index ) { + case STRID_LANGID: + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + break; + + case STRID_SERIAL: + chr_count = board_usb_get_serial(_desc_str + 1, 32); + break; + + default: + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + + const char *str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type + if ( chr_count > max_count ) chr_count = max_count; + + // Convert ASCII string into UTF-16 + for ( size_t i = 0; i < chr_count; i++ ) { + _desc_str[1 + i] = str[i]; + } + break; + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); + + return _desc_str; +} |