diff options
Diffstat (limited to 'examples/device/cdc_uac2/src')
| -rw-r--r-- | examples/device/cdc_uac2/src/tusb_config.h | 8 | ||||
| -rw-r--r-- | examples/device/cdc_uac2/src/usb_descriptors.c | 21 |
2 files changed, 17 insertions, 12 deletions
diff --git a/examples/device/cdc_uac2/src/tusb_config.h b/examples/device/cdc_uac2/src/tusb_config.h index 358ff6747..f54a9b606 100644 --- a/examples/device/cdc_uac2/src/tusb_config.h +++ b/examples/device/cdc_uac2/src/tusb_config.h @@ -109,8 +109,10 @@ extern "C" { #define CFG_TUD_AUDIO_FUNC_1_N_FORMATS 2 // Audio format type I specifications -#if defined(__RX__) -#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE 48000 // 16bit/48kHz is the best quality for Renesas RX +#if defined(__RX__) || (CFG_TUSB_MCU == OPT_MCU_PY32F0) +// RX : 16bit/48kHz is the best quality for Renesas RX +// PY32F0 : 48kHz/16bit keeps ISO packets <= 98 B so both directions fit the fixed EP FIFOs (EP1 512 B, EP2 128 B) +#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE 48000 #else #define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE 96000 // 24bit/96kHz is the best quality for full-speed, high-speed is needed beyond this #endif @@ -123,7 +125,7 @@ extern "C" { #define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX 2 #define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX 16 -#if defined(__RX__) +#if defined(__RX__) || (CFG_TUSB_MCU == OPT_MCU_PY32F0) // 8bit in 8bit slots #define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX 1 #define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX 8 diff --git a/examples/device/cdc_uac2/src/usb_descriptors.c b/examples/device/cdc_uac2/src/usb_descriptors.c index fdffc761e..648c56e71 100644 --- a/examples/device/cdc_uac2/src/usb_descriptors.c +++ b/examples/device/cdc_uac2/src/usb_descriptors.c @@ -29,15 +29,8 @@ #include "tusb.h" #include "usb_descriptors.h" -/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. - * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. - * - * Auto ProductID layout's Bitmap: - * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] - */ -#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ - PID_MAP(MIDI, 3) | PID_MAP(AUDIO, 4) | PID_MAP(VENDOR, 5) ) +// Unique PID per example: guarantees re-enumeration on re-flash and a fresh host driver match. +#define USB_PID 0x400a //--------------------------------------------------------------------+ // Device Descriptors @@ -117,6 +110,16 @@ uint8_t const * tud_descriptor_device_cb(void) #define EPNUM_CDC_IN 0x85 #endif +#elif CFG_TUSB_MIMXRT1XXX_ERRATA_ERR050101 + // ERR050101 (see CFG_TUSB_MIMXRT1XXX_ERRATA_ERR050101): an isochronous IN endpoint needs a number + // no other device on the bus uses + #define EPNUM_AUDIO_IN 0x07 + #define EPNUM_AUDIO_OUT 0x01 + + #define EPNUM_CDC_NOTIF 0x83 + #define EPNUM_CDC_OUT 0x04 + #define EPNUM_CDC_IN 0x84 + #else #define EPNUM_AUDIO_IN 0x01 #define EPNUM_AUDIO_OUT 0x01 |