summaryrefslogtreecommitdiff
path: root/examples/device/device_virtual_com/segger/SEGGER_RTT_Conf.h
diff options
context:
space:
mode:
Diffstat (limited to 'examples/device/device_virtual_com/segger/SEGGER_RTT_Conf.h')
-rw-r--r--examples/device/device_virtual_com/segger/SEGGER_RTT_Conf.h242
1 files changed, 0 insertions, 242 deletions
diff --git a/examples/device/device_virtual_com/segger/SEGGER_RTT_Conf.h b/examples/device/device_virtual_com/segger/SEGGER_RTT_Conf.h
deleted file mode 100644
index aef3b4053..000000000
--- a/examples/device/device_virtual_com/segger/SEGGER_RTT_Conf.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/*********************************************************************
-* SEGGER MICROCONTROLLER GmbH & Co. KG *
-* Solutions for real time microcontroller applications *
-**********************************************************************
-* *
-* (c) 2014 - 2016 SEGGER Microcontroller GmbH & Co. KG *
-* *
-* www.segger.com Support: [email protected] *
-* *
-**********************************************************************
-* *
-* SEGGER RTT * Real Time Transfer for embedded targets *
-* *
-**********************************************************************
-* *
-* All rights reserved. *
-* *
-* * This software may in its unmodified form be freely redistributed *
-* in source form. *
-* * The source code may be modified, provided the source code *
-* retains the above copyright notice, this list of conditions and *
-* the following disclaimer. *
-* * Modified versions of this software in source or linkable form *
-* may not be distributed without prior consent of SEGGER. *
-* * This software may only be used for communication with SEGGER *
-* J-Link debug probes. *
-* *
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
-* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
-* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
-* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
-* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
-* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
-* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
-* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
-* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
-* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
-* DAMAGE. *
-* *
-**********************************************************************
-* *
-* RTT version: 5.12e *
-* *
-**********************************************************************
-----------------------------------------------------------------------
-File : SEGGER_RTT_Conf.h
-Purpose : Implementation of SEGGER real-time transfer (RTT) which
- allows real-time communication on targets which support
- debugger memory accesses while the CPU is running.
----------------------------END-OF-HEADER------------------------------
-*/
-
-#ifndef SEGGER_RTT_CONF_H
-#define SEGGER_RTT_CONF_H
-
-#ifdef __ICCARM__
- #include <intrinsics.h>
-#endif
-
-/*********************************************************************
-*
-* Defines, configurable
-*
-**********************************************************************
-*/
-
-#define SEGGER_RTT_MAX_NUM_UP_BUFFERS (2) // Max. number of up-buffers (T->H) available on this target (Default: 2)
-#define SEGGER_RTT_MAX_NUM_DOWN_BUFFERS (2) // Max. number of down-buffers (H->T) available on this target (Default: 2)
-
-#define BUFFER_SIZE_UP (1024) // Size of the buffer for terminal output of target, up to host (Default: 1k)
-#define BUFFER_SIZE_DOWN (16) // Size of the buffer for terminal input to target from host (Usually keyboard input) (Default: 16)
-
-#define SEGGER_RTT_PRINTF_BUFFER_SIZE (64u) // Size of buffer for RTT printf to bulk-send chars via RTT (Default: 64)
-
-#define SEGGER_RTT_MODE_DEFAULT SEGGER_RTT_MODE_NO_BLOCK_SKIP // Mode for pre-initialized terminal channel (buffer 0)
-
-//
-// Target is not allowed to perform other RTT operations while string still has not been stored completely.
-// Otherwise we would probably end up with a mixed string in the buffer.
-// If using RTT from within interrupts, multiple tasks or multi processors, define the SEGGER_RTT_LOCK() and SEGGER_RTT_UNLOCK() function here.
-//
-// SEGGER_RTT_MAX_INTERRUPT_PRIORITY can be used in the sample lock routines on Cortex-M3/4.
-// Make sure to mask all interrupts which can send RTT data, i.e. generate SystemView events, or cause task switches.
-// When high-priority interrupts must not be masked while sending RTT data, SEGGER_RTT_MAX_INTERRUPT_PRIORITY needs to be adjusted accordingly.
-// (Higher priority = lower priority number)
-// Default value for embOS: 128u
-// Default configuration in FreeRTOS: configMAX_SYSCALL_INTERRUPT_PRIORITY: ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-// In case of doubt mask all interrupts: 0u
-//
-
-#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) // Interrupt priority to lock on SEGGER_RTT_LOCK on Cortex-M3/4 (Default: 0x20)
-
-/*********************************************************************
-*
-* RTT lock configuration for SEGGER Embedded Studio,
-* Rowley CrossStudio and GCC
-*/
-#if (defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)
- #ifdef __ARM_ARCH_6M__
- #define SEGGER_RTT_LOCK() { \
- unsigned int LockState; \
- __asm volatile ("mrs %0, primask \n\t" \
- "mov r1, $1 \n\t" \
- "msr primask, r1 \n\t" \
- : "=r" (LockState) \
- : \
- : "r1" \
- );
-
- #define SEGGER_RTT_UNLOCK() __asm volatile ("msr primask, %0 \n\t" \
- : \
- : "r" (LockState) \
- : \
- ); \
- }
-
- #elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__))
- #ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
- #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
- #endif
- #define SEGGER_RTT_LOCK() { \
- unsigned int LockState; \
- __asm volatile ("mrs %0, basepri \n\t" \
- "mov r1, %1 \n\t" \
- "msr basepri, r1 \n\t" \
- : "=r" (LockState) \
- : "i"(SEGGER_RTT_MAX_INTERRUPT_PRIORITY) \
- : "r1" \
- );
-
- #define SEGGER_RTT_UNLOCK() __asm volatile ("msr basepri, %0 \n\t" \
- : \
- : "r" (LockState) \
- : \
- ); \
- }
-
- #elif defined(__ARM_ARCH_7A__)
- #define SEGGER_RTT_LOCK() { \
- unsigned int LockState; \
- __asm volatile ("mrs r1, CPSR \n\t" \
- "mov %0, r1 \n\t" \
- "orr r1, r1, #0xC0 \n\t" \
- "msr CPSR_c, r1 \n\t" \
- : "=r" (LockState) \
- : \
- : "r1" \
- );
-
- #define SEGGER_RTT_UNLOCK() __asm volatile ("mov r0, %0 \n\t" \
- "mrs r1, CPSR \n\t" \
- "bic r1, r1, #0xC0 \n\t" \
- "and r0, r0, #0xC0 \n\t" \
- "orr r1, r1, r0 \n\t" \
- "msr CPSR_c, r1 \n\t" \
- : \
- : "r" (LockState) \
- : "r0", "r1" \
- ); \
- }
-#else
- #define SEGGER_RTT_LOCK()
- #define SEGGER_RTT_UNLOCK()
- #endif
-#endif
-
-/*********************************************************************
-*
-* RTT lock configuration for IAR EWARM
-*/
-#ifdef __ICCARM__
- #if (defined (__ARM6M__) && (__CORE__ == __ARM6M__))
- #define SEGGER_RTT_LOCK() { \
- unsigned int LockState; \
- LockState = __get_PRIMASK(); \
- __set_PRIMASK(1);
-
- #define SEGGER_RTT_UNLOCK() __set_PRIMASK(LockState); \
- }
- #elif ((defined (__ARM7EM__) && (__CORE__ == __ARM7EM__)) || (defined (__ARM7M__) && (__CORE__ == __ARM7M__)))
- #ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
- #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
- #endif
- #define SEGGER_RTT_LOCK() { \
- unsigned int LockState; \
- LockState = __get_BASEPRI(); \
- __set_BASEPRI(SEGGER_RTT_MAX_INTERRUPT_PRIORITY);
-
- #define SEGGER_RTT_UNLOCK() __set_BASEPRI(LockState); \
- }
- #endif
-#endif
-
-/*********************************************************************
-*
-* RTT lock configuration for KEIL ARM
-*/
-#ifdef __CC_ARM
- #if (defined __TARGET_ARCH_6S_M)
- #define SEGGER_RTT_LOCK() { \
- unsigned int LockState; \
- register unsigned char PRIMASK __asm( "primask"); \
- LockState = PRIMASK; \
- PRIMASK = 1u; \
- __schedule_barrier();
-
- #define SEGGER_RTT_UNLOCK() PRIMASK = LockState; \
- __schedule_barrier(); \
- }
- #elif (defined(__TARGET_ARCH_7_M) || defined(__TARGET_ARCH_7E_M))
- #ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
- #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
- #endif
- #define SEGGER_RTT_LOCK() { \
- unsigned int LockState; \
- register unsigned char BASEPRI __asm( "basepri"); \
- LockState = BASEPRI; \
- BASEPRI = SEGGER_RTT_MAX_INTERRUPT_PRIORITY; \
- __schedule_barrier();
-
- #define SEGGER_RTT_UNLOCK() BASEPRI = LockState; \
- __schedule_barrier(); \
- }
- #endif
-#endif
-
-/*********************************************************************
-*
-* RTT lock configuration fallback
-*/
-#ifndef SEGGER_RTT_LOCK
- #define SEGGER_RTT_LOCK() // Lock RTT (nestable) (i.e. disable interrupts)
-#endif
-
-#ifndef SEGGER_RTT_UNLOCK
- #define SEGGER_RTT_UNLOCK() // Unlock RTT (nestable) (i.e. enable previous interrupt lock state)
-#endif
-
-#endif
-/*************************** End of file ****************************/
generated by cgit v1.3.1 (git 2.54.0) at 2026-09-04 05:57:05 +0000