diff options
Diffstat (limited to 'examples/device/dfu')
| -rw-r--r-- | examples/device/dfu/CMakeLists.txt | 15 | ||||
| -rw-r--r-- | examples/device/dfu/Makefile | 8 | ||||
| -rw-r--r-- | examples/device/dfu/skip.txt | 1 | ||||
| -rw-r--r-- | examples/device/dfu/src/main.c | 99 | ||||
| -rw-r--r-- | examples/device/dfu/src/usb_descriptors.c | 193 |
5 files changed, 185 insertions, 131 deletions
diff --git a/examples/device/dfu/CMakeLists.txt b/examples/device/dfu/CMakeLists.txt index 3da8ee3df..61d169460 100644 --- a/examples/device/dfu/CMakeLists.txt +++ b/examples/device/dfu/CMakeLists.txt @@ -2,31 +2,28 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(dfu C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/dfu/Makefile b/examples/device/dfu/Makefile index 52a24cdb0..9e1eab4a2 100644 --- a/examples/device/dfu/Makefile +++ b/examples/device/dfu/Makefile @@ -1,14 +1,14 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE = \ src/main.c \ src/usb_descriptors.c -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/dfu/skip.txt b/examples/device/dfu/skip.txt index 9dde06c30..ccff857ac 100644 --- a/examples/device/dfu/skip.txt +++ b/examples/device/dfu/skip.txt @@ -1,3 +1,2 @@ -mcu:TM4C123 mcu:BCM2835 family:espressif diff --git a/examples/device/dfu/src/main.c b/examples/device/dfu/src/main.c index c0c848837..fb3c22630 100644 --- a/examples/device/dfu/src/main.c +++ b/examples/device/dfu/src/main.c @@ -23,7 +23,7 @@ * */ - /* +/* * After device is enumerated in dfu mode run the following commands * * To transfer firmware from host to device (best to test with text file) @@ -48,21 +48,18 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ -const char* upload_image[2]= -{ - "Hello world from TinyUSB DFU! - Partition 0", - "Hello world from TinyUSB DFU! - Partition 1" -}; +const char *upload_image[2] = {"Hello world from TinyUSB DFU! - Partition 0", + "Hello world from TinyUSB DFU! - Partition 1"}; /* Blink pattern * - 250 ms : device not mounted * - 1000 ms : device mounted * - 2500 ms : device is suspended */ -enum { +enum { BLINK_NOT_MOUNTED = 250, - BLINK_MOUNTED = 1000, - BLINK_SUSPENDED = 2500, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, }; static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; @@ -70,21 +67,16 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; void led_blinking_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); // init device stack on configured roothub port - tusb_rhport_init_t dev_init = { - .role = TUSB_ROLE_DEVICE, - .speed = TUSB_SPEED_AUTO - }; + tusb_rhport_init_t dev_init = {.role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO}; tusb_init(BOARD_TUD_RHPORT, &dev_init); board_init_after_tusb(); - while (1) - { + while (1) { tud_task(); // tinyusb device task led_blinking_task(); } @@ -95,29 +87,25 @@ int main(void) //--------------------------------------------------------------------+ // Invoked when device is mounted -void tud_mount_cb(void) -{ +void tud_mount_cb(void) { blink_interval_ms = BLINK_MOUNTED; } // Invoked when device is unmounted -void tud_umount_cb(void) -{ +void tud_umount_cb(void) { blink_interval_ms = BLINK_NOT_MOUNTED; } // Invoked when usb bus is suspended // remote_wakeup_en : if host allow us to perform remote wakeup // Within 7ms, device must draw an average of current less than 2.5 mA from bus -void tud_suspend_cb(bool remote_wakeup_en) -{ - (void) remote_wakeup_en; +void tud_suspend_cb(bool remote_wakeup_en) { + (void)remote_wakeup_en; blink_interval_ms = BLINK_SUSPENDED; } // Invoked when usb bus is resumed -void tud_resume_cb(void) -{ +void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } @@ -129,19 +117,17 @@ void tud_resume_cb(void) // Invoked right before tud_dfu_download_cb() (state=DFU_DNBUSY) or tud_dfu_manifest_cb() (state=DFU_MANIFEST) // Application return timeout in milliseconds (bwPollTimeout) for the next download/manifest operation. // During this period, USB host won't try to communicate with us. -uint32_t tud_dfu_get_timeout_cb(uint8_t alt, uint8_t state) -{ - if ( state == DFU_DNBUSY ) - { +uint32_t tud_dfu_get_timeout_cb(uint8_t alt, uint8_t state) { + if (state == DFU_DNBUSY) { // For this example // - Atl0 Flash is fast : 1 ms // - Alt1 EEPROM is slow: 100 ms return (alt == 0) ? 1 : 100; - } - else if (state == DFU_MANIFEST) - { + } else if (state == DFU_MANIFEST) { // since we don't buffer entire image and do any flashing in manifest stage return 0; + } else { + // nothing to do } return 0; @@ -150,15 +136,13 @@ uint32_t tud_dfu_get_timeout_cb(uint8_t alt, uint8_t state) // Invoked when received DFU_DNLOAD (wLength>0) following by DFU_GETSTATUS (state=DFU_DNBUSY) requests // This callback could be returned before flashing op is complete (async). // Once finished flashing, application must call tud_dfu_finish_flashing() -void tud_dfu_download_cb(uint8_t alt, uint16_t block_num, uint8_t const* data, uint16_t length) -{ - (void) alt; - (void) block_num; +void tud_dfu_download_cb(uint8_t alt, uint16_t block_num, const uint8_t *data, uint16_t length) { + (void)alt; + (void)block_num; //printf("\r\nReceived Alt %u BlockNum %u of length %u\r\n", alt, wBlockNum, length); - for(uint16_t i=0; i<length; i++) - { + for (uint16_t i = 0; i < length; i++) { printf("%c", data[i]); } @@ -169,9 +153,8 @@ void tud_dfu_download_cb(uint8_t alt, uint16_t block_num, uint8_t const* data, u // Invoked when download process is complete, received DFU_DNLOAD (wLength=0) following by DFU_GETSTATUS (state=Manifest) // Application can do checksum, or actual flashing if buffered entire image previously. // Once finished flashing, application must call tud_dfu_finish_flashing() -void tud_dfu_manifest_cb(uint8_t alt) -{ - (void) alt; +void tud_dfu_manifest_cb(uint8_t alt) { + (void)alt; printf("Download completed, enter manifestation\r\n"); // flashing op for manifest is complete without error @@ -182,27 +165,28 @@ void tud_dfu_manifest_cb(uint8_t alt) // Invoked when received DFU_UPLOAD request // Application must populate data with up to length bytes and // Return the number of written bytes -uint16_t tud_dfu_upload_cb(uint8_t alt, uint16_t block_num, uint8_t* data, uint16_t length) -{ - (void) block_num; - (void) length; +uint16_t tud_dfu_upload_cb(uint8_t alt, uint16_t block_num, uint8_t *data, uint16_t length) { + (void)block_num; + (void)length; - uint16_t const xfer_len = (uint16_t) strlen(upload_image[alt]); + if (block_num != 0u) { + return 0; // for this example we only support single block upload + } + + const uint16_t xfer_len = tu_min16((uint16_t)strlen(upload_image[alt]), length); memcpy(data, upload_image[alt], xfer_len); return xfer_len; } // Invoked when the Host has terminated a download or upload transfer -void tud_dfu_abort_cb(uint8_t alt) -{ - (void) alt; +void tud_dfu_abort_cb(uint8_t alt) { + (void)alt; printf("Host aborted transfer\r\n"); } // Invoked when a DFU_DETACH request is received -void tud_dfu_detach_cb(void) -{ +void tud_dfu_detach_cb(void) { printf("Host detach, we should probably reboot\r\n"); } @@ -210,13 +194,14 @@ void tud_dfu_detach_cb(void) // BLINKING TASK + Indicator pulse //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ - static uint32_t start_ms = 0; - static bool led_state = false; +void led_blinking_task(void) { + static uint32_t start_ms = 0; + static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/dfu/src/usb_descriptors.c b/examples/device/dfu/src/usb_descriptors.c index fd469aaf2..e4291be2d 100644 --- a/examples/device/dfu/src/usb_descriptors.c +++ b/examples/device/dfu/src/usb_descriptors.c @@ -25,7 +25,6 @@ #include "bsp/board_api.h" #include "tusb.h" -#include "class/dfu/dfu_device.h" /* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. @@ -33,49 +32,45 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4)) //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = -{ - .bLength = sizeof(tusb_desc_device_t), - .bDescriptorType = TUSB_DESC_DEVICE, - .bcdUSB = 0x0200, +static const tusb_desc_device_t desc_device = + {.bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0201, - #if CFG_TUD_CDC - // Use Interface Association Descriptor (IAD) for CDC - // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) - .bDeviceClass = TUSB_CLASS_MISC, - .bDeviceSubClass = MISC_SUBCLASS_COMMON, - .bDeviceProtocol = MISC_PROTOCOL_IAD, - #else - .bDeviceClass = 0x00, - .bDeviceSubClass = 0x00, - .bDeviceProtocol = 0x00, - #endif +#if CFG_TUD_CDC + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, +#else + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, +#endif - .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - .idVendor = 0xCafe, - .idProduct = USB_PID, - .bcdDevice = 0x0100, + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, - .iManufacturer = 0x01, - .iProduct = 0x02, - .iSerialNumber = 0x03, + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, - .bNumConfigurations = 0x01 -}; + .bNumConfigurations = 0x01}; // Invoked when received GET DEVICE DESCRIPTOR // Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ - return (uint8_t const *) &desc_device; +const uint8_t *tud_descriptor_device_cb(void) { + return (const uint8_t *)&desc_device; } //--------------------------------------------------------------------+ @@ -83,20 +78,17 @@ uint8_t const * tud_descriptor_device_cb(void) //--------------------------------------------------------------------+ // Number of Alternate Interface (each for 1 flash partition) -#define ALT_COUNT 2 +#define ALT_COUNT 2 -enum -{ +enum { ITF_NUM_DFU_MODE, ITF_NUM_TOTAL }; -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_DFU_DESC_LEN(ALT_COUNT)) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_DFU_DESC_LEN(ALT_COUNT)) +#define FUNC_ATTRS (DFU_ATTR_CAN_UPLOAD | DFU_ATTR_CAN_DOWNLOAD | DFU_ATTR_MANIFESTATION_TOLERANT) -#define FUNC_ATTRS (DFU_ATTR_CAN_UPLOAD | DFU_ATTR_CAN_DOWNLOAD | DFU_ATTR_MANIFESTATION_TOLERANT) - -uint8_t const desc_configuration[] = -{ +uint8_t const desc_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -107,13 +99,91 @@ uint8_t const desc_configuration[] = // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ - (void) index; // for multiple configurations +const uint8_t *tud_descriptor_configuration_cb(uint8_t index) { + (void)index; // for multiple configurations return desc_configuration; } //--------------------------------------------------------------------+ +// BOS Descriptor +//--------------------------------------------------------------------+ + +/* Microsoft OS 2.0 registry property descriptor + Per MS requirements https://msdn.microsoft.com/en-us/library/windows/hardware/hh450799(v=vs.85).aspx + device should create DeviceInterfaceGUIDs. It can be done by driver and + in case of real PnP solution device should expose MS "Microsoft OS 2.0 + registry property descriptor". Such descriptor can insert any record + into Windows registry per device/configuration/interface. In our case it + will insert "DeviceInterfaceGUIDs" multistring property. + GUID is freshly generated and should be OK to use. + https://developers.google.com/web/fundamentals/native-hardware/build-for-webusb/ + (Section Microsoft OS compatibility descriptors) +*/ + +#define BOS_TOTAL_LEN (TUD_BOS_DESC_LEN + TUD_BOS_MICROSOFT_OS_DESC_LEN) +#define MS_OS_20_DESC_LEN 0xA2 +#define VENDOR_REQUEST_MICROSOFT 1 + +// BOS Descriptor is required for webUSB +const uint8_t desc_bos[] = { + // total length, number of device caps + TUD_BOS_DESCRIPTOR(BOS_TOTAL_LEN, 1), + + // Microsoft OS 2.0 descriptor + TUD_BOS_MS_OS_20_DESCRIPTOR(MS_OS_20_DESC_LEN, 1)}; + +const uint8_t *tud_descriptor_bos_cb(void) { + return desc_bos; +} + +const uint8_t desc_ms_os_20[] = { + // Set header: length, type, windows version, total length + U16_TO_U8S_LE(0x000A), U16_TO_U8S_LE(MS_OS_20_SET_HEADER_DESCRIPTOR), U32_TO_U8S_LE(0x06030000), + U16_TO_U8S_LE(MS_OS_20_DESC_LEN), + + // MS OS 2.0 Compatible ID descriptor: length, type, compatible ID, sub compatible ID + U16_TO_U8S_LE(0x0014), U16_TO_U8S_LE(MS_OS_20_FEATURE_COMPATBLE_ID), 'W', 'I', 'N', 'U', 'S', 'B', 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // sub-compatible + + // MS OS 2.0 Registry property descriptor: length, type + U16_TO_U8S_LE(MS_OS_20_DESC_LEN - 0x0A - 0x14), U16_TO_U8S_LE(MS_OS_20_FEATURE_REG_PROPERTY), + U16_TO_U8S_LE(0x0007), U16_TO_U8S_LE(0x002A),// wPropertyDataType, wPropertyNameLength and PropertyName "DeviceInterfaceGUIDs\0" in UTF-16 + 'D', 0x00, 'e', 0x00, 'v', 0x00, 'i', 0x00, 'c', 0x00, 'e', 0x00, 'I', 0x00, 'n', 0x00, 't', 0x00, 'e', 0x00, + 'r', 0x00, 'f', 0x00, 'a', 0x00, 'c', 0x00, 'e', 0x00, 'G', 0x00, 'U', 0x00, 'I', 0x00, 'D', 0x00, 's', 0x00, 0x00, 0x00, + U16_TO_U8S_LE(0x0050),// wPropertyDataLength + //bPropertyData: {3E7E0711-DF3B-4158-A32F-E5951B2AB9A1}. + '{', 0x00, '3', 0x00, 'E', 0x00, '7', 0x00, 'E', 0x00, '0', 0x00, '7', 0x00, '1', 0x00, '1', 0x00, '-', 0x00, + 'D', 0x00, 'F', 0x00, '3', 0x00, 'B', 0x00, '-', 0x00, '4', 0x00, '1', 0x00, '5', 0x00, '8', 0x00, '-', 0x00, + 'A', 0x00, '3', 0x00, '2', 0x00, 'F', 0x00, '-', 0x00, 'E', 0x00, '5', 0x00, '9', 0x00, '5', 0x00, '1', 0x00, + 'B', 0x00, '2', 0x00, 'A', 0x00, 'B', 0x00, '9', 0x00, 'A', 0x00, '1', 0x00, '}', 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +TU_VERIFY_STATIC(sizeof(desc_ms_os_20) == MS_OS_20_DESC_LEN, "Incorrect size"); + +// Invoked when a control transfer occurred on an interface of this class +// Driver response accordingly to the request and the transfer stage (setup/data/ack) +// return false to stall control endpoint (e.g unsupported request) +bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_request_t *request) { + // nothing to with DATA & ACK stage + if (stage != CONTROL_STAGE_SETUP) { + return true; + } + + if (request->bmRequestType_bit.type == TUSB_REQ_TYPE_VENDOR) { + if (request->bRequest == VENDOR_REQUEST_MICROSOFT) { + if (request->wIndex == 7) { + return tud_control_xfer(rhport, request, (void *)(uintptr_t)desc_ms_os_20, MS_OS_20_DESC_LEN); + } else { + return false; + } + } + } + + // stall unknown request + return false; +} + +//--------------------------------------------------------------------+ // String Descriptors //--------------------------------------------------------------------+ @@ -126,25 +196,24 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = -{ - (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) - "TinyUSB", // 1: Manufacturer - "TinyUSB Device", // 2: Product - NULL, // 3: Serials will use unique ID if possible - "FLASH", // 4: DFU Partition 1 - "EEPROM", // 5: DFU Partition 2 +static const char *string_desc_arr[] = { + (const char[]){0x09, 0x04}, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + NULL, // 3: Serials will use unique ID if possible + "FLASH", // 4: DFU Partition 1 + "EEPROM", // 5: DFU Partition 2 }; static uint16_t _desc_str[32 + 1]; // Invoked when received GET STRING DESCRIPTOR request // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete -uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { - (void) langid; +const uint16_t *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { + (void)langid; size_t chr_count; - switch ( index ) { + switch (index) { case STRID_LANGID: memcpy(&_desc_str[1], string_desc_arr[0], 2); chr_count = 1; @@ -158,24 +227,28 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); - size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + chr_count = strlen(str); + const size_t max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 - for ( size_t i = 0; i < chr_count; i++ ) { + for (size_t i = 0; i < chr_count; i++) { _desc_str[1 + i] = str[i]; } break; } // first byte is length (including header), second byte is string type - _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); + _desc_str[0] = (uint16_t)((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); return _desc_str; } |