diff options
Diffstat (limited to 'examples/device')
30 files changed, 653 insertions, 115 deletions
diff --git a/examples/device/audio_test/CMakeLists.txt b/examples/device/audio_test/CMakeLists.txt new file mode 100644 index 000000000..99ee77bd3 --- /dev/null +++ b/examples/device/audio_test/CMakeLists.txt @@ -0,0 +1,40 @@ +# use directory name for project id +get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) + +# TOP is absolute path to root directory of TinyUSB git repo +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +# Check for -DFAMILY= +if(FAMILY STREQUAL "rp2040") + cmake_minimum_required(VERSION 3.12) + set(PICO_SDK_PATH ${TOP}/hw/mcu/raspberrypi/pico-sdk) + include(${PICO_SDK_PATH}/pico_sdk_init.cmake) + project(${PROJECT}) + pico_sdk_init() + add_executable(${PROJECT}) + + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + + # Example defines + target_compile_definitions(${PROJECT} PUBLIC + CFG_TUSB_OS=OPT_OS_PICO + ) + + target_link_libraries(${PROJECT} pico_stdlib) + pico_add_extra_outputs(${PROJECT}) + +else() + message(FATAL_ERROR "Invalid FAMILY specified") +endif() diff --git a/examples/device/audio_test/src/tusb_config.h b/examples/device/audio_test/src/tusb_config.h index 5d94858ea..61e63f073 100644 --- a/examples/device/audio_test/src/tusb_config.h +++ b/examples/device/audio_test/src/tusb_config.h @@ -45,7 +45,9 @@ extern "C" { #define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE #endif +#ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE +#endif #ifndef CFG_TUSB_DEBUG #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/board_test/CMakeLists.txt b/examples/device/board_test/CMakeLists.txt index 54a4009fe..68577ba73 100644 --- a/examples/device/board_test/CMakeLists.txt +++ b/examples/device/board_test/CMakeLists.txt @@ -1,5 +1,3 @@ -cmake_minimum_required(VERSION 3.5) - # use directory name for project id get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) @@ -8,58 +6,39 @@ set(TOP "../../..") get_filename_component(TOP "${TOP}" REALPATH) # Check for -DFAMILY= -if(NOT DEFINED FAMILY) - message(FATAL_ERROR "Invalid FAMILY specified") -endif() - -include(${TOP}/hw/bsp/${FAMILY}/family.cmake) -project(${PROJECT}) +if(FAMILY STREQUAL "esp32s2") + cmake_minimum_required(VERSION 3.5) + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + project(${PROJECT}) -if(FAMILY STREQUAL "rp2040") +elseif(FAMILY STREQUAL "rp2040") + cmake_minimum_required(VERSION 3.12) + set(PICO_SDK_PATH ${TOP}/hw/mcu/raspberrypi/pico-sdk) + include(${PICO_SDK_PATH}/pico_sdk_init.cmake) + project(${PROJECT}) + pico_sdk_init() + add_executable(${PROJECT}) -pico_sdk_init() + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) -add_executable(${PROJECT}) + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ) -# TinyUSB Stack source -set(SRC_TINYUSB - ${TOP}/src/tusb.c - ${TOP}/src/common/tusb_fifo.c - ${TOP}/src/device/usbd.c - ${TOP}/src/device/usbd_control.c - ${TOP}/src/class/audio/audio_device.c - ${TOP}/src/class/cdc/cdc_device.c - ${TOP}/src/class/dfu/dfu_rt_device.c - ${TOP}/src/class/hid/hid_device.c - ${TOP}/src/class/midi/midi_device.c - ${TOP}/src/class/msc/msc_device.c - ${TOP}/src/class/net/net_device.c - ${TOP}/src/class/usbtmc/usbtmc_device.c - ${TOP}/src/class/vendor/vendor_device.c - ${TOP}/src/portable/raspberrypi/${FAMILY}/dcd_rp2040.c - ${TOP}/src/portable/raspberrypi/${FAMILY}/rp2040_usb.c -) + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) -target_sources(${PROJECT} PUBLIC - src/main.c - ${TOP}/hw/bsp/${FAMILY}/family.c - ${SRC_TINYUSB} -) + # Example defines + target_compile_definitions(${PROJECT} PUBLIC + CFG_TUSB_OS=OPT_OS_PICO + ) -target_include_directories(${PROJECT} PUBLIC - src/ - ${TOP}/hw - ${TOP}/src - ${TOP}/hw/bsp/${FAMILY}/boards/${BOARD} -) - -target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_MCU=OPT_MCU_RP2040 - CFG_TUSB_OS=OPT_OS_PICO -) - -target_link_libraries(${PROJECT} pico_stdlib) - -pico_add_extra_outputs(${PROJECT}) + target_link_libraries(${PROJECT} pico_stdlib) + pico_add_extra_outputs(${PROJECT}) +else() + message(FATAL_ERROR "Invalid FAMILY specified") endif() diff --git a/examples/device/board_test/src/CMakeLists.txt b/examples/device/board_test/src/CMakeLists.txt index 29ae46a33..e59661069 100644 --- a/examples/device/board_test/src/CMakeLists.txt +++ b/examples/device/board_test/src/CMakeLists.txt @@ -1,3 +1,4 @@ +# FAMILY = "esp32s2" idf_component_register(SRCS "main.c" INCLUDE_DIRS "." REQUIRES freertos soc) diff --git a/examples/device/cdc_dual_ports/CMakeLists.txt b/examples/device/cdc_dual_ports/CMakeLists.txt new file mode 100644 index 000000000..99ee77bd3 --- /dev/null +++ b/examples/device/cdc_dual_ports/CMakeLists.txt @@ -0,0 +1,40 @@ +# use directory name for project id +get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) + +# TOP is absolute path to root directory of TinyUSB git repo +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +# Check for -DFAMILY= +if(FAMILY STREQUAL "rp2040") + cmake_minimum_required(VERSION 3.12) + set(PICO_SDK_PATH ${TOP}/hw/mcu/raspberrypi/pico-sdk) + include(${PICO_SDK_PATH}/pico_sdk_init.cmake) + project(${PROJECT}) + pico_sdk_init() + add_executable(${PROJECT}) + + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + + # Example defines + target_compile_definitions(${PROJECT} PUBLIC + CFG_TUSB_OS=OPT_OS_PICO + ) + + target_link_libraries(${PROJECT} pico_stdlib) + pico_add_extra_outputs(${PROJECT}) + +else() + message(FATAL_ERROR "Invalid FAMILY specified") +endif() diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index ada122b62..7f5d5a998 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -1,5 +1,3 @@ -cmake_minimum_required(VERSION 3.5) - # use directory name for project id get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) @@ -8,65 +6,41 @@ set(TOP "../../..") get_filename_component(TOP "${TOP}" REALPATH) # Check for -DFAMILY= -if(NOT DEFINED FAMILY) - message(FATAL_ERROR "Invalid FAMILY specified") -endif() - -include(${TOP}/hw/bsp/${FAMILY}/family.cmake) -project(${PROJECT}) - -if(FAMILY STREQUAL "rp2040") +if(FAMILY STREQUAL "esp32s2") + cmake_minimum_required(VERSION 3.5) + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + project(${PROJECT}) -pico_sdk_init() +elseif(FAMILY STREQUAL "rp2040") + cmake_minimum_required(VERSION 3.12) + set(PICO_SDK_PATH ${TOP}/hw/mcu/raspberrypi/pico-sdk) + include(${PICO_SDK_PATH}/pico_sdk_init.cmake) + project(${PROJECT}) + pico_sdk_init() + add_executable(${PROJECT}) -add_executable(${PROJECT}) + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) -# TinyUSB Stack source -set(SRC_TINYUSB - ${TOP}/src/tusb.c - ${TOP}/src/common/tusb_fifo.c - ${TOP}/src/device/usbd.c - ${TOP}/src/device/usbd_control.c - ${TOP}/src/class/audio/audio_device.c - ${TOP}/src/class/cdc/cdc_device.c - ${TOP}/src/class/dfu/dfu_rt_device.c - ${TOP}/src/class/hid/hid_device.c - ${TOP}/src/class/midi/midi_device.c - ${TOP}/src/class/msc/msc_device.c - ${TOP}/src/class/net/net_device.c - ${TOP}/src/class/usbtmc/usbtmc_device.c - ${TOP}/src/class/vendor/vendor_device.c - ${TOP}/src/portable/raspberrypi/${FAMILY}/dcd_rp2040.c - ${TOP}/src/portable/raspberrypi/${FAMILY}/rp2040_usb.c -) + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) -# Example source -set(SRC_EXAMPLE - src/main.c - src/msc_disk.c - src/usb_descriptors.c -) + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) -target_sources(${PROJECT} PUBLIC - ${SRC_EXAMPLE} - ${TOP}/hw/bsp/${FAMILY}/family.c - ${SRC_TINYUSB} -) + # Example defines + target_compile_definitions(${PROJECT} PUBLIC + CFG_TUSB_OS=OPT_OS_PICO + ) -target_include_directories(${PROJECT} PUBLIC - src/ - ${TOP}/hw - ${TOP}/src - ${TOP}/hw/bsp/${FAMILY}/boards/${BOARD} -) - -target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_MCU=OPT_MCU_RP2040 - CFG_TUSB_OS=OPT_OS_PICO -) - -target_link_libraries(${PROJECT} pico_stdlib) - -pico_add_extra_outputs(${PROJECT}) + target_link_libraries(${PROJECT} pico_stdlib) + pico_add_extra_outputs(${PROJECT}) +else() + message(FATAL_ERROR "Invalid FAMILY specified") endif() diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 b/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 diff --git a/examples/device/dfu_rt/CMakeLists.txt b/examples/device/dfu_rt/CMakeLists.txt new file mode 100644 index 000000000..99ee77bd3 --- /dev/null +++ b/examples/device/dfu_rt/CMakeLists.txt @@ -0,0 +1,40 @@ +# use directory name for project id +get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) + +# TOP is absolute path to root directory of TinyUSB git repo +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +# Check for -DFAMILY= +if(FAMILY STREQUAL "rp2040") + cmake_minimum_required(VERSION 3.12) + set(PICO_SDK_PATH ${TOP}/hw/mcu/raspberrypi/pico-sdk) + include(${PICO_SDK_PATH}/pico_sdk_init.cmake) + project(${PROJECT}) + pico_sdk_init() + add_executable(${PROJECT}) + + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + + # Example defines + target_compile_definitions(${PROJECT} PUBLIC + CFG_TUSB_OS=OPT_OS_PICO + ) + + target_link_libraries(${PROJECT} pico_stdlib) + pico_add_extra_outputs(${PROJECT}) + +else() + message(FATAL_ERROR "Invalid FAMILY specified") +endif() diff --git a/examples/device/dfu_rt/src/tusb_config.h b/examples/device/dfu_rt/src/tusb_config.h index 226573263..abdbe7526 100644 --- a/examples/device/dfu_rt/src/tusb_config.h +++ b/examples/device/dfu_rt/src/tusb_config.h @@ -46,8 +46,9 @@ #error "Incorrect RHPort configuration" #endif -// This example doesn't use an RTOS +#ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE +#endif // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/dynamic_configuration/CMakeLists.txt b/examples/device/dynamic_configuration/CMakeLists.txt new file mode 100644 index 000000000..f26465729 --- /dev/null +++ b/examples/device/dynamic_configuration/CMakeLists.txt @@ -0,0 +1,41 @@ +# use directory name for project id +get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) + +# TOP is absolute path to root directory of TinyUSB git repo +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +# Check for -DFAMILY= +if(FAMILY STREQUAL "rp2040") + cmake_minimum_required(VERSION 3.12) + set(PICO_SDK_PATH ${TOP}/hw/mcu/raspberrypi/pico-sdk) + include(${PICO_SDK_PATH}/pico_sdk_init.cmake) + project(${PROJECT}) + pico_sdk_init() + add_executable(${PROJECT}) + + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + + # Example defines + target_compile_definitions(${PROJECT} PUBLIC + CFG_TUSB_OS=OPT_OS_PICO + ) + + target_link_libraries(${PROJECT} pico_stdlib) + pico_add_extra_outputs(${PROJECT}) + +else() + message(FATAL_ERROR "Invalid FAMILY specified") +endif() diff --git a/examples/device/dynamic_configuration/src/tusb_config.h b/examples/device/dynamic_configuration/src/tusb_config.h index 2f8072f89..23073faf3 100644 --- a/examples/device/dynamic_configuration/src/tusb_config.h +++ b/examples/device/dynamic_configuration/src/tusb_config.h @@ -64,8 +64,9 @@ #error "Incorrect RHPort configuration" #endif -// This example doesn't use an RTOS +#ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE +#endif // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/hid_composite/CMakeLists.txt b/examples/device/hid_composite/CMakeLists.txt new file mode 100644 index 000000000..99ee77bd3 --- /dev/null +++ b/examples/device/hid_composite/CMakeLists.txt @@ -0,0 +1,40 @@ +# use directory name for project id +get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) + +# TOP is absolute path to root directory of TinyUSB git repo +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +# Check for -DFAMILY= +if(FAMILY STREQUAL "rp2040") + cmake_minimum_required(VERSION 3.12) + set(PICO_SDK_PATH ${TOP}/hw/mcu/raspberrypi/pico-sdk) + include(${PICO_SDK_PATH}/pico_sdk_init.cmake) + project(${PROJECT}) + pico_sdk_init() + add_executable(${PROJECT}) + + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + + # Example defines + target_compile_definitions(${PROJECT} PUBLIC + CFG_TUSB_OS=OPT_OS_PICO + ) + + target_link_libraries(${PROJECT} pico_stdlib) + pico_add_extra_outputs(${PROJECT}) + +else() + message(FATAL_ERROR "Invalid FAMILY specified") +endif() diff --git a/examples/device/hid_composite/src/tusb_config.h b/examples/device/hid_composite/src/tusb_config.h index d8e6b73e8..3e608ed37 100644 --- a/examples/device/hid_composite/src/tusb_config.h +++ b/examples/device/hid_composite/src/tusb_config.h @@ -64,8 +64,9 @@ #error "Incorrect RHPort configuration" #endif -// This example doesn't use an RTOS +#ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE +#endif // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/hid_composite_freertos/.skip.MCU_RP2040 b/examples/device/hid_composite_freertos/.skip.MCU_RP2040 new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/examples/device/hid_composite_freertos/.skip.MCU_RP2040 diff --git a/examples/device/hid_generic_inout/CMakeLists.txt b/examples/device/hid_generic_inout/CMakeLists.txt new file mode 100644 index 000000000..99ee77bd3 --- /dev/null +++ b/examples/device/hid_generic_inout/CMakeLists.txt @@ -0,0 +1,40 @@ +# use directory name for project id +get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) + +# TOP is absolute path to root directory of TinyUSB git repo +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +# Check for -DFAMILY= +if(FAMILY STREQUAL "rp2040") + cmake_minimum_required(VERSION 3.12) + set(PICO_SDK_PATH ${TOP}/hw/mcu/raspberrypi/pico-sdk) + include(${PICO_SDK_PATH}/pico_sdk_init.cmake) + project(${PROJECT}) + pico_sdk_init() + add_executable(${PROJECT}) + + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + + # Example defines + target_compile_definitions(${PROJECT} PUBLIC + CFG_TUSB_OS=OPT_OS_PICO + ) + + target_link_libraries(${PROJECT} pico_stdlib) + pico_add_extra_outputs(${PROJECT}) + +else() + message(FATAL_ERROR "Invalid FAMILY specified") +endif() diff --git a/examples/device/hid_generic_inout/src/tusb_config.h b/examples/device/hid_generic_inout/src/tusb_config.h index 347cb06d6..1b8b91c41 100644 --- a/examples/device/hid_generic_inout/src/tusb_config.h +++ b/examples/device/hid_generic_inout/src/tusb_config.h @@ -64,8 +64,9 @@ #error "Incorrect RHPort configuration" #endif -// This example doesn't use an RTOS +#ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE +#endif // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/hid_multiple_interface/CMakeLists.txt b/examples/device/hid_multiple_interface/CMakeLists.txt new file mode 100644 index 000000000..99ee77bd3 --- /dev/null +++ b/examples/device/hid_multiple_interface/CMakeLists.txt @@ -0,0 +1,40 @@ +# use directory name for project id +get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) + +# TOP is absolute path to root directory of TinyUSB git repo +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +# Check for -DFAMILY= +if(FAMILY STREQUAL "rp2040") + cmake_minimum_required(VERSION 3.12) + set(PICO_SDK_PATH ${TOP}/hw/mcu/raspberrypi/pico-sdk) + include(${PICO_SDK_PATH}/pico_sdk_init.cmake) + project(${PROJECT}) + pico_sdk_init() + add_executable(${PROJECT}) + + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + + # Example defines + target_compile_definitions(${PROJECT} PUBLIC + CFG_TUSB_OS=OPT_OS_PICO + ) + + target_link_libraries(${PROJECT} pico_stdlib) + pico_add_extra_outputs(${PROJECT}) + +else() + message(FATAL_ERROR "Invalid FAMILY specified") +endif() diff --git a/examples/device/hid_multiple_interface/src/tusb_config.h b/examples/device/hid_multiple_interface/src/tusb_config.h index 412f9b004..a0aa17a90 100644 --- a/examples/device/hid_multiple_interface/src/tusb_config.h +++ b/examples/device/hid_multiple_interface/src/tusb_config.h @@ -64,8 +64,9 @@ #error "Incorrect RHPort configuration" #endif -// This example doesn't use an RTOS +#ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE +#endif // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/midi_test/CMakeLists.txt b/examples/device/midi_test/CMakeLists.txt new file mode 100644 index 000000000..99ee77bd3 --- /dev/null +++ b/examples/device/midi_test/CMakeLists.txt @@ -0,0 +1,40 @@ +# use directory name for project id +get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) + +# TOP is absolute path to root directory of TinyUSB git repo +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +# Check for -DFAMILY= +if(FAMILY STREQUAL "rp2040") + cmake_minimum_required(VERSION 3.12) + set(PICO_SDK_PATH ${TOP}/hw/mcu/raspberrypi/pico-sdk) + include(${PICO_SDK_PATH}/pico_sdk_init.cmake) + project(${PROJECT}) + pico_sdk_init() + add_executable(${PROJECT}) + + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + + # Example defines + target_compile_definitions(${PROJECT} PUBLIC + CFG_TUSB_OS=OPT_OS_PICO + ) + + target_link_libraries(${PROJECT} pico_stdlib) + pico_add_extra_outputs(${PROJECT}) + +else() + message(FATAL_ERROR "Invalid FAMILY specified") +endif() diff --git a/examples/device/midi_test/src/tusb_config.h b/examples/device/midi_test/src/tusb_config.h index d0c327e27..61b9b6552 100644 --- a/examples/device/midi_test/src/tusb_config.h +++ b/examples/device/midi_test/src/tusb_config.h @@ -64,8 +64,9 @@ #error "Incorrect RHPort configuration" #endif -// This example doesn't use an RTOS +#ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE +#endif // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/msc_dual_lun/CMakeLists.txt b/examples/device/msc_dual_lun/CMakeLists.txt new file mode 100644 index 000000000..084565400 --- /dev/null +++ b/examples/device/msc_dual_lun/CMakeLists.txt @@ -0,0 +1,41 @@ +# use directory name for project id +get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) + +# TOP is absolute path to root directory of TinyUSB git repo +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +# Check for -DFAMILY= +if(FAMILY STREQUAL "rp2040") + cmake_minimum_required(VERSION 3.12) + set(PICO_SDK_PATH ${TOP}/hw/mcu/raspberrypi/pico-sdk) + include(${PICO_SDK_PATH}/pico_sdk_init.cmake) + project(${PROJECT}) + pico_sdk_init() + add_executable(${PROJECT}) + + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk_dual.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + + # Example defines + target_compile_definitions(${PROJECT} PUBLIC + CFG_TUSB_OS=OPT_OS_PICO + ) + + target_link_libraries(${PROJECT} pico_stdlib) + pico_add_extra_outputs(${PROJECT}) + +else() + message(FATAL_ERROR "Invalid FAMILY specified") +endif() diff --git a/examples/device/msc_dual_lun/src/tusb_config.h b/examples/device/msc_dual_lun/src/tusb_config.h index e153a7967..44da21e54 100644 --- a/examples/device/msc_dual_lun/src/tusb_config.h +++ b/examples/device/msc_dual_lun/src/tusb_config.h @@ -64,8 +64,9 @@ #error "Incorrect RHPort configuration" #endif -// This example doesn't use an RTOS +#ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE +#endif // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt new file mode 100644 index 000000000..695dd7c59 --- /dev/null +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -0,0 +1,87 @@ +# use directory name for project id +get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) + +# TOP is absolute path to root directory of TinyUSB git repo +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +# Check for -DFAMILY= +if(FAMILY STREQUAL "rp2040") + cmake_minimum_required(VERSION 3.12) + set(PICO_SDK_PATH ${TOP}/hw/mcu/raspberrypi/pico-sdk) + include(${PICO_SDK_PATH}/pico_sdk_init.cmake) + project(${PROJECT}) + pico_sdk_init() + add_executable(${PROJECT}) + + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + + # lwip Stack source + set(SRC_LWIP + ${TOP}/lib/lwip/src/core/altcp.c + ${TOP}/lib/lwip/src/core/altcp_alloc.c + ${TOP}/lib/lwip/src/core/altcp_tcp.c + ${TOP}/lib/lwip/src/core/def.c + ${TOP}/lib/lwip/src/core/dns.c + ${TOP}/lib/lwip/src/core/inet_chksum.c + ${TOP}/lib/lwip/src/core/init.c + ${TOP}/lib/lwip/src/core/ip.c + ${TOP}/lib/lwip/src/core/mem.c + ${TOP}/lib/lwip/src/core/memp.c + ${TOP}/lib/lwip/src/core/netif.c + ${TOP}/lib/lwip/src/core/pbuf.c + ${TOP}/lib/lwip/src/core/raw.c + ${TOP}/lib/lwip/src/core/stats.c + ${TOP}/lib/lwip/src/core/sys.c + ${TOP}/lib/lwip/src/core/tcp.c + ${TOP}/lib/lwip/src/core/tcp_in.c + ${TOP}/lib/lwip/src/core/tcp_out.c + ${TOP}/lib/lwip/src/core/timeouts.c + ${TOP}/lib/lwip/src/core/udp.c + ${TOP}/lib/lwip/src/core/ipv4/autoip.c + ${TOP}/lib/lwip/src/core/ipv4/dhcp.c + ${TOP}/lib/lwip/src/core/ipv4/etharp.c + ${TOP}/lib/lwip/src/core/ipv4/icmp.c + ${TOP}/lib/lwip/src/core/ipv4/igmp.c + ${TOP}/lib/lwip/src/core/ipv4/ip4.c + ${TOP}/lib/lwip/src/core/ipv4/ip4_addr.c + ${TOP}/lib/lwip/src/core/ipv4/ip4_frag.c + ${TOP}/lib/lwip/src/netif/ethernet.c + ${TOP}/lib/lwip/src/netif/slipif.c + ${TOP}/lib/lwip/src/apps/http/httpd.c + ${TOP}/lib/lwip/src/apps/http/fs.c + ${TOP}/lib/networking/dhserver.c + ${TOP}/lib/networking/dnserver.c + ${TOP}/lib/networking/rndis_reports.c + ) + + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ${SRC_LWIP} + ) + + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ${TOP}/lib/lwip/src/include + ${TOP}/lib/lwip/src/include/ipv4 + ${TOP}/lib/lwip/src/include/lwip/apps + ${TOP}/lib/networking + ) + + # Example defines + target_compile_definitions(${PROJECT} PUBLIC + CFG_TUSB_OS=OPT_OS_PICO + PBUF_POOL_SIZE=2 + TCP_WND=2*TCP_MSS + HTTPD_USE_CUSTOM_FSDATA=0 + ) + + target_link_libraries(${PROJECT} pico_stdlib) + pico_add_extra_outputs(${PROJECT}) + +else() + message(FATAL_ERROR "Invalid FAMILY specified") +endif() diff --git a/examples/device/net_lwip_webserver/src/tusb_config.h b/examples/device/net_lwip_webserver/src/tusb_config.h index b6d0e7a86..262d4ebce 100644 --- a/examples/device/net_lwip_webserver/src/tusb_config.h +++ b/examples/device/net_lwip_webserver/src/tusb_config.h @@ -64,8 +64,9 @@ #error "Incorrect RHPort configuration" #endif -// This example doesn't use an RTOS +#ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE +#endif // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/uac2_headset/CMakeLists.txt b/examples/device/uac2_headset/CMakeLists.txt new file mode 100644 index 000000000..99ee77bd3 --- /dev/null +++ b/examples/device/uac2_headset/CMakeLists.txt @@ -0,0 +1,40 @@ +# use directory name for project id +get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) + +# TOP is absolute path to root directory of TinyUSB git repo +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +# Check for -DFAMILY= +if(FAMILY STREQUAL "rp2040") + cmake_minimum_required(VERSION 3.12) + set(PICO_SDK_PATH ${TOP}/hw/mcu/raspberrypi/pico-sdk) + include(${PICO_SDK_PATH}/pico_sdk_init.cmake) + project(${PROJECT}) + pico_sdk_init() + add_executable(${PROJECT}) + + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + + # Example defines + target_compile_definitions(${PROJECT} PUBLIC + CFG_TUSB_OS=OPT_OS_PICO + ) + + target_link_libraries(${PROJECT} pico_stdlib) + pico_add_extra_outputs(${PROJECT}) + +else() + message(FATAL_ERROR "Invalid FAMILY specified") +endif() diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h index d19feeb86..ebf181671 100644 --- a/examples/device/uac2_headset/src/tusb_config.h +++ b/examples/device/uac2_headset/src/tusb_config.h @@ -46,7 +46,9 @@ extern "C" { #define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE #endif +#ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE +#endif #ifndef CFG_TUSB_DEBUG // Can be set during compilation i.e.: make LOG=<value for CFG_TUSB_DEBUG> BOARD=<bsp> diff --git a/examples/device/usbtmc/CMakeLists.txt b/examples/device/usbtmc/CMakeLists.txt new file mode 100644 index 000000000..03bb04389 --- /dev/null +++ b/examples/device/usbtmc/CMakeLists.txt @@ -0,0 +1,41 @@ +# use directory name for project id +get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) + +# TOP is absolute path to root directory of TinyUSB git repo +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +# Check for -DFAMILY= +if(FAMILY STREQUAL "rp2040") + cmake_minimum_required(VERSION 3.12) + set(PICO_SDK_PATH ${TOP}/hw/mcu/raspberrypi/pico-sdk) + include(${PICO_SDK_PATH}/pico_sdk_init.cmake) + project(${PROJECT}) + pico_sdk_init() + add_executable(${PROJECT}) + + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usbtmc_app.c + ) + + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + + # Example defines + target_compile_definitions(${PROJECT} PUBLIC + CFG_TUSB_OS=OPT_OS_PICO + ) + + target_link_libraries(${PROJECT} pico_stdlib) + pico_add_extra_outputs(${PROJECT}) + +else() + message(FATAL_ERROR "Invalid FAMILY specified") +endif() diff --git a/examples/device/usbtmc/src/tusb_config.h b/examples/device/usbtmc/src/tusb_config.h index 603e67453..a192d0dbc 100644 --- a/examples/device/usbtmc/src/tusb_config.h +++ b/examples/device/usbtmc/src/tusb_config.h @@ -46,8 +46,9 @@ #error "Incorrect RHPort configuration" #endif -// This example doesn't use an RTOS +#ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE +#endif // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/webusb_serial/CMakeLists.txt b/examples/device/webusb_serial/CMakeLists.txt new file mode 100644 index 000000000..99ee77bd3 --- /dev/null +++ b/examples/device/webusb_serial/CMakeLists.txt @@ -0,0 +1,40 @@ +# use directory name for project id +get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) + +# TOP is absolute path to root directory of TinyUSB git repo +set(TOP "../../..") +get_filename_component(TOP "${TOP}" REALPATH) + +# Check for -DFAMILY= +if(FAMILY STREQUAL "rp2040") + cmake_minimum_required(VERSION 3.12) + set(PICO_SDK_PATH ${TOP}/hw/mcu/raspberrypi/pico-sdk) + include(${PICO_SDK_PATH}/pico_sdk_init.cmake) + project(${PROJECT}) + pico_sdk_init() + add_executable(${PROJECT}) + + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + + # Example defines + target_compile_definitions(${PROJECT} PUBLIC + CFG_TUSB_OS=OPT_OS_PICO + ) + + target_link_libraries(${PROJECT} pico_stdlib) + pico_add_extra_outputs(${PROJECT}) + +else() + message(FATAL_ERROR "Invalid FAMILY specified") +endif() diff --git a/examples/device/webusb_serial/src/tusb_config.h b/examples/device/webusb_serial/src/tusb_config.h index 48c9ddad6..26b81b389 100644 --- a/examples/device/webusb_serial/src/tusb_config.h +++ b/examples/device/webusb_serial/src/tusb_config.h @@ -64,8 +64,9 @@ #error "Incorrect RHPort configuration" #endif -// This example doesn't use an RTOS +#ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE +#endif // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 |