diff options
Diffstat (limited to 'examples/host/bare_api/src')
| -rw-r--r-- | examples/host/bare_api/src/main.c | 9 | ||||
| -rw-r--r-- | examples/host/bare_api/src/tusb_config.h | 68 |
2 files changed, 47 insertions, 30 deletions
diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index 51cab2de0..14725996d 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -32,7 +32,7 @@ #include <stdio.h> #include <string.h> -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" // English @@ -67,6 +67,10 @@ int main(void) // init host stack on configured roothub port tuh_init(BOARD_TUH_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { // tinyusb host task @@ -410,6 +414,7 @@ static int _count_utf8_bytes(const uint16_t *buf, size_t len) { } static void print_utf16(uint16_t *temp_buf, size_t buf_len) { + if ((temp_buf[0] & 0xff) == 0) return; // empty size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t); size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len); _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h index ed0aaf7da..432446e94 100644 --- a/examples/host/bare_api/src/tusb_config.h +++ b/examples/host/bare_api/src/tusb_config.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -30,22 +30,8 @@ extern "C" { #endif -//--------------------------------------------------------------------+ -// Board Specific Configuration -//--------------------------------------------------------------------+ - -// RHPort number used for host can be defined by board.mk, default to port 0 -#ifndef BOARD_TUH_RHPORT -#define BOARD_TUH_RHPORT 0 -#endif - -// RHPort max operational speed can defined by board.mk -#ifndef BOARD_TUH_MAX_SPEED -#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED -#endif - //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- // defined by compiler flags for flexibility @@ -61,12 +47,6 @@ #define CFG_TUSB_DEBUG 0 #endif -// Enable Host stack -#define CFG_TUH_ENABLED 1 - -// Default is max speed that hardware controller could support with on-chip PHY -#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED - /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -74,16 +54,48 @@ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) */ -#ifndef CFG_TUSB_MEM_SECTION -#define CFG_TUSB_MEM_SECTION +#ifndef CFG_TUH_MEM_SECTION +#define CFG_TUH_MEM_SECTION +#endif + +#ifndef CFG_TUH_MEM_ALIGN +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 #endif -#ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif //-------------------------------------------------------------------- -// CONFIGURATION +// Driver Configuration //-------------------------------------------------------------------- // Size of buffer to hold descriptors and other data used for enumeration @@ -94,7 +106,7 @@ // max device support (excluding hub device) // 1 hub typically has 4 ports -#define CFG_TUH_DEVICE_MAX (CFG_TUH_HUB ? 4 : 1) +#define CFG_TUH_DEVICE_MAX (3*CFG_TUH_HUB + 1) // Max endpoint per device #define CFG_TUH_ENDPOINT_MAX 8 |