diff options
Diffstat (limited to 'examples/host/cdc_msc_hid_freertos/src/tusb_config.h')
| -rw-r--r-- | examples/host/cdc_msc_hid_freertos/src/tusb_config.h | 133 |
1 files changed, 133 insertions, 0 deletions
diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h new file mode 100644 index 000000000..1bed9a9b3 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -0,0 +1,133 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 + #define CFG_TUH_RPI_PIO_USB 0 + #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB +#endif + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_FREERTOS +#endif + +// Espressif IDF requires "freertos/" prefix in include path +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#define CFG_TUSB_OS_INC_PATH freertos/ +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUH_MEM_SECTION +#define CFG_TUH_MEM_SECTION +#endif + +#ifndef CFG_TUH_MEM_ALIGN +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// CONFIGURATION +//-------------------------------------------------------------------- + +// Size of buffer to hold descriptors and other data used for enumeration +#define CFG_TUH_ENUMERATION_BUFSIZE 256 + +#define CFG_TUH_HUB 1 // number of supported hubs +#define CFG_TUH_CDC 1 // CDC ACM +#define CFG_TUH_CDC_FTDI 1 // FTDI Serial. FTDI is not part of CDC class, only to re-use CDC driver API +#define CFG_TUH_CDC_CP210X 1 // CP210x Serial. CP210X is not part of CDC class, only to re-use CDC driver API +#define CFG_TUH_HID (3*CFG_TUH_DEVICE_MAX) // typical keyboard + mouse device can have 3-4 HID interfaces +#define CFG_TUH_MSC 1 +#define CFG_TUH_VENDOR 0 + +// max device support (excluding hub device): 1 hub typically has 4 ports +#define CFG_TUH_DEVICE_MAX (3*CFG_TUH_HUB + 1) + +//------------- HID -------------// +#define CFG_TUH_HID_EPIN_BUFSIZE 64 +#define CFG_TUH_HID_EPOUT_BUFSIZE 64 + +//------------- CDC -------------// + +// Set Line Control state on enumeration/mounted: +// DTR ( bit 0), RTS (bit 1) +#define CFG_TUH_CDC_LINE_CONTROL_ON_ENUM 0x03 + +// Set Line Coding on enumeration/mounted, value for cdc_line_coding_t +// bit rate = 115200, 1 stop bit, no parity, 8 bit data width +#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CONDING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } + + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ |