diff options
Diffstat (limited to 'examples/host')
38 files changed, 1488 insertions, 270 deletions
diff --git a/examples/host/CMakeLists.txt b/examples/host/CMakeLists.txt index bedd2220b..e6a2ece14 100644 --- a/examples/host/CMakeLists.txt +++ b/examples/host/CMakeLists.txt @@ -8,5 +8,6 @@ family_initialize_project(tinyusb_host_examples ${CMAKE_CURRENT_LIST_DIR}) # family_add_subdirectory will filter what to actually add based on selected FAMILY family_add_subdirectory(bare_api) family_add_subdirectory(cdc_msc_hid) +family_add_subdirectory(cdc_msc_hid_freertos) family_add_subdirectory(hid_controller) family_add_subdirectory(msc_file_explorer) diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt index 95af48718..76182d6fa 100644 --- a/examples/host/bare_api/CMakeLists.txt +++ b/examples/host/bare_api/CMakeLists.txt @@ -10,6 +10,11 @@ project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +# Espressif has its own cmake build system +if(FAMILY STREQUAL "espressif") + return() +endif() + add_executable(${PROJECT}) # Example source @@ -25,8 +30,3 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. family_configure_host_example(${PROJECT} noos) - -# Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host -if(FAMILY STREQUAL "rp2040") - family_add_pico_pio_usb(${PROJECT}) -endif() diff --git a/examples/host/bare_api/Makefile b/examples/host/bare_api/Makefile index 058307c40..0235e08c3 100644 --- a/examples/host/bare_api/Makefile +++ b/examples/host/bare_api/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -10,14 +10,4 @@ EXAMPLE_SOURCE += \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -# TinyUSB Host Stack source -SRC_C += \ - src/class/cdc/cdc_host.c \ - src/class/hid/hid_host.c \ - src/class/msc/msc_host.c \ - src/host/hub.c \ - src/host/usbh.c \ - src/portable/ohci/ohci.c \ - src/portable/nxp/lpc17_40/hcd_lpc17_40.c - -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index 45da6c3f2..fee10f9e2 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -1,3 +1,4 @@ +mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX @@ -9,3 +10,5 @@ mcu:MIMXRT11XX mcu:RP2040 mcu:MSP432E4 mcu:RX65X +mcu:RAXXX +mcu:MAX3421 diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index bb7fa850e..670e58498 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -32,8 +32,9 @@ #include <stdio.h> #include <string.h> -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" +#include "class/hid/hid.h" // English #define LANGUAGE_ID 0x0409 @@ -67,6 +68,10 @@ int main(void) // init host stack on configured roothub port tuh_init(BOARD_TUH_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { // tinyusb host task @@ -410,10 +415,11 @@ static int _count_utf8_bytes(const uint16_t *buf, size_t len) { } static void print_utf16(uint16_t *temp_buf, size_t buf_len) { + if ((temp_buf[0] & 0xff) == 0) return; // empty size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t); size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len); _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); ((uint8_t*) temp_buf)[utf8_len] = '\0'; - printf((char*)temp_buf); + printf("%s", (char*)temp_buf); } diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h index ede9618d3..432446e94 100644 --- a/examples/host/bare_api/src/tusb_config.h +++ b/examples/host/bare_api/src/tusb_config.h @@ -30,28 +30,8 @@ extern "C" { #endif -//--------------------------------------------------------------------+ -// Board Specific Configuration -//--------------------------------------------------------------------+ - -#if CFG_TUSB_MCU == OPT_MCU_RP2040 -// change to 1 if using pico-pio-usb as host controller for raspberry rp2040 -#define CFG_TUH_RPI_PIO_USB 0 -#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -#endif - -// RHPort number used for host can be defined by board.mk, default to port 0 -#ifndef BOARD_TUH_RHPORT -#define BOARD_TUH_RHPORT 0 -#endif - -// RHPort max operational speed can defined by board.mk -#ifndef BOARD_TUH_MAX_SPEED -#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED -#endif - //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- // defined by compiler flags for flexibility @@ -67,12 +47,6 @@ #define CFG_TUSB_DEBUG 0 #endif -// Enable Host stack -#define CFG_TUH_ENABLED 1 - -// Default is max speed that hardware controller could support with on-chip PHY -#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED - /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -85,11 +59,43 @@ #endif #ifndef CFG_TUH_MEM_ALIGN -#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif //-------------------------------------------------------------------- -// CONFIGURATION +// Driver Configuration //-------------------------------------------------------------------- // Size of buffer to hold descriptors and other data used for enumeration diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index 3fdc832ab..a7c372a34 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -10,6 +10,11 @@ project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +# Espressif has its own cmake build system +if(FAMILY STREQUAL "espressif") + return() +endif() + add_executable(${PROJECT}) # Example source @@ -28,8 +33,3 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. family_configure_host_example(${PROJECT} noos) - -# Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host -if(FAMILY STREQUAL "rp2040") - family_add_pico_pio_usb(${PROJECT}) -endif() diff --git a/examples/host/cdc_msc_hid/Makefile b/examples/host/cdc_msc_hid/Makefile index 7c16b39d3..213c02f9c 100644 --- a/examples/host/cdc_msc_hid/Makefile +++ b/examples/host/cdc_msc_hid/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -13,14 +13,4 @@ EXAMPLE_SOURCE = \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -# TinyUSB Host Stack source -SRC_C += \ - src/class/cdc/cdc_host.c \ - src/class/hid/hid_host.c \ - src/class/msc/msc_host.c \ - src/host/hub.c \ - src/host/usbh.c \ - src/portable/ohci/ohci.c \ - src/portable/nxp/lpc17_40/hcd_lpc17_40.c - -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index 45da6c3f2..fee10f9e2 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -1,3 +1,4 @@ +mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX @@ -9,3 +10,5 @@ mcu:MIMXRT11XX mcu:RP2040 mcu:MSP432E4 mcu:RX65X +mcu:RAXXX +mcu:MAX3421 diff --git a/examples/host/cdc_msc_hid/src/cdc_app.c b/examples/host/cdc_msc_hid/src/cdc_app.c index 7769d109e..4a13f8b27 100644 --- a/examples/host/cdc_msc_hid/src/cdc_app.c +++ b/examples/host/cdc_msc_hid/src/cdc_app.c @@ -25,22 +25,13 @@ */ #include "tusb.h" -#include "bsp/board.h" +#include "bsp/board_api.h" -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - - -//------------- IMPLEMENTATION -------------// - -size_t get_console_inputs(uint8_t* buf, size_t bufsize) -{ +size_t get_console_inputs(uint8_t* buf, size_t bufsize) { size_t count = 0; - while (count < bufsize) - { + while (count < bufsize) { int ch = board_getchar(); - if ( ch <= 0 ) break; + if (ch <= 0) break; buf[count] = (uint8_t) ch; count++; @@ -49,22 +40,18 @@ size_t get_console_inputs(uint8_t* buf, size_t bufsize) return count; } -void cdc_app_task(void) -{ - uint8_t buf[64+1]; // +1 for extra null character - uint32_t const bufsize = sizeof(buf)-1; +void cdc_app_task(void) { + uint8_t buf[64 + 1]; // +1 for extra null character + uint32_t const bufsize = sizeof(buf) - 1; uint32_t count = get_console_inputs(buf, bufsize); buf[count] = 0; // loop over all mounted interfaces - for(uint8_t idx=0; idx<CFG_TUH_CDC; idx++) - { - if ( tuh_cdc_mounted(idx) ) - { + for (uint8_t idx = 0; idx < CFG_TUH_CDC; idx++) { + if (tuh_cdc_mounted(idx)) { // console --> cdc interfaces - if (count) - { + if (count) { tuh_cdc_write(idx, buf, count); tuh_cdc_write_flush(idx); } @@ -72,42 +59,51 @@ void cdc_app_task(void) } } +//--------------------------------------------------------------------+ +// TinyUSB callbacks +//--------------------------------------------------------------------+ + // Invoked when received new data -void tuh_cdc_rx_cb(uint8_t idx) -{ - uint8_t buf[64+1]; // +1 for extra null character - uint32_t const bufsize = sizeof(buf)-1; +void tuh_cdc_rx_cb(uint8_t idx) { + uint8_t buf[64 + 1]; // +1 for extra null character + uint32_t const bufsize = sizeof(buf) - 1; // forward cdc interfaces -> console uint32_t count = tuh_cdc_read(idx, buf, bufsize); buf[count] = 0; - printf((char*) buf); + printf("%s", (char*) buf); } -void tuh_cdc_mount_cb(uint8_t idx) -{ - tuh_itf_info_t itf_info = { 0 }; +// Invoked when a device with CDC interface is mounted +// idx is index of cdc interface in the internal pool. +void tuh_cdc_mount_cb(uint8_t idx) { + tuh_itf_info_t itf_info = {0}; tuh_cdc_itf_get_info(idx, &itf_info); - printf("CDC Interface is mounted: address = %u, itf_num = %u\r\n", itf_info.daddr, itf_info.desc.bInterfaceNumber); + printf("CDC Interface is mounted: address = %u, itf_num = %u\r\n", itf_info.daddr, + itf_info.desc.bInterfaceNumber); #ifdef CFG_TUH_CDC_LINE_CODING_ON_ENUM - // CFG_TUH_CDC_LINE_CODING_ON_ENUM must be defined for line coding is set by tinyusb in enumeration - // otherwise you need to call tuh_cdc_set_line_coding() first - cdc_line_coding_t line_coding = { 0 }; - if ( tuh_cdc_get_local_line_coding(idx, &line_coding) ) - { - printf(" Baudrate: %lu, Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); - printf(" Parity : %u, Data Width: %u\r\n", line_coding.parity , line_coding.data_bits); + // If CFG_TUH_CDC_LINE_CODING_ON_ENUM is defined, line coding will be set by tinyusb stack + // while eneumerating new cdc device + cdc_line_coding_t line_coding = {0}; + if (tuh_cdc_get_local_line_coding(idx, &line_coding)) { + printf(" Baudrate: %" PRIu32 ", Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); + printf(" Parity : %u, Data Width: %u\r\n", line_coding.parity, line_coding.data_bits); } +#else + // Set Line Coding upon mounted + cdc_line_coding_t new_line_coding = { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 }; + tuh_cdc_set_line_coding(idx, &new_line_coding, NULL, 0); #endif } -void tuh_cdc_umount_cb(uint8_t idx) -{ - tuh_itf_info_t itf_info = { 0 }; +// Invoked when a device with CDC interface is unmounted +void tuh_cdc_umount_cb(uint8_t idx) { + tuh_itf_info_t itf_info = {0}; tuh_cdc_itf_get_info(idx, &itf_info); - printf("CDC Interface is unmounted: address = %u, itf_num = %u\r\n", itf_info.daddr, itf_info.desc.bInterfaceNumber); + printf("CDC Interface is unmounted: address = %u, itf_num = %u\r\n", itf_info.daddr, + itf_info.desc.bInterfaceNumber); } diff --git a/examples/host/cdc_msc_hid/src/hid_app.c b/examples/host/cdc_msc_hid/src/hid_app.c index 87e110ab2..f0d42a08f 100644 --- a/examples/host/cdc_msc_hid/src/hid_app.c +++ b/examples/host/cdc_msc_hid/src/hid_app.c @@ -23,7 +23,7 @@ * */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ @@ -160,7 +160,9 @@ static void process_kbd_report(hid_keyboard_report_t const *report) putchar(ch); if ( ch == '\r' ) putchar('\n'); // added new line for enter key + #ifndef __ICCARM__ // TODO IAR doesn't support stream control ? fflush(stdout); // flush right away, else nanolib will wait for newline + #endif } } // TODO example skips key released diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index 1f4acb822..a3b80e030 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -27,20 +27,24 @@ #include <stdio.h> #include <string.h> -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ void led_blinking_task(void); - extern void cdc_app_task(void); extern void hid_app_task(void); +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 +// API to read/rite MAX3421's register. Implemented by TinyUSB +extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); +extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); +#endif + /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); printf("TinyUSB Host CDC MSC HID Example\r\n"); @@ -48,8 +52,17 @@ int main(void) // init host stack on configured roothub port tuh_init(BOARD_TUH_RHPORT); - while (1) - { + if (board_init_after_tusb) { + board_init_after_tusb(); + } + +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 + // FeatherWing MAX3421E use MAX3421E's GPIO0 for VBUS enable + enum { IOPINS1_ADDR = 20u << 3, /* 0xA0 */ }; + tuh_max3421_reg_write(BOARD_TUH_RHPORT, IOPINS1_ADDR, 0x01, false); +#endif + + while (1) { // tinyusb host task tuh_task(); @@ -63,14 +76,12 @@ int main(void) // TinyUSB Callbacks //--------------------------------------------------------------------+ -void tuh_mount_cb(uint8_t dev_addr) -{ +void tuh_mount_cb(uint8_t dev_addr) { // application set-up printf("A device with address %d is mounted\r\n", dev_addr); } -void tuh_umount_cb(uint8_t dev_addr) -{ +void tuh_umount_cb(uint8_t dev_addr) { // application tear-down printf("A device with address %d is unmounted \r\n", dev_addr); } @@ -79,15 +90,14 @@ void tuh_umount_cb(uint8_t dev_addr) //--------------------------------------------------------------------+ // Blinking Task //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { const uint32_t interval_ms = 1000; static uint32_t start_ms = 0; static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < interval_ms) return; // not enough time + if (board_millis() - start_ms < interval_ms) return; // not enough time start_ms += interval_ms; board_led_write(led_state); diff --git a/examples/host/cdc_msc_hid/src/msc_app.c b/examples/host/cdc_msc_hid/src/msc_app.c index e9c9676b8..1d7e18e6e 100644 --- a/examples/host/cdc_msc_hid/src/msc_app.c +++ b/examples/host/cdc_msc_hid/src/msc_app.c @@ -48,8 +48,8 @@ bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_da uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun); - printf("Disk Size: %lu MB\r\n", block_count / ((1024*1024)/block_size)); - printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size); + printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024*1024)/block_size)); + printf("Block Count = %" PRIu32 ", Block Size: %" PRIu32 "\r\n", block_count, block_size); return true; } diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index abb75f068..a59a0ffb9 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -30,28 +30,8 @@ extern "C" { #endif -//--------------------------------------------------------------------+ -// Board Specific Configuration -//--------------------------------------------------------------------+ - -#if CFG_TUSB_MCU == OPT_MCU_RP2040 -// change to 1 if using pico-pio-usb as host controller for raspberry rp2040 -#define CFG_TUH_RPI_PIO_USB 0 -#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -#endif - -// RHPort number used for host can be defined by board.mk, default to port 0 -#ifndef BOARD_TUH_RHPORT -#define BOARD_TUH_RHPORT 0 -#endif - -// RHPort max operational speed can defined by board.mk -#ifndef BOARD_TUH_MAX_SPEED -#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED -#endif - //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- // defined by compiler flags for flexibility @@ -67,12 +47,6 @@ #define CFG_TUSB_DEBUG 0 #endif -// Enable Host stack -#define CFG_TUH_ENABLED 1 - -// Default is max speed that hardware controller could support with on-chip PHY -#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED - /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -85,11 +59,43 @@ #endif #ifndef CFG_TUH_MEM_ALIGN -#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif //-------------------------------------------------------------------- -// CONFIGURATION +// Driver Configuration //-------------------------------------------------------------------- // Size of buffer to hold descriptors and other data used for enumeration @@ -99,6 +105,7 @@ #define CFG_TUH_CDC 1 // CDC ACM #define CFG_TUH_CDC_FTDI 1 // FTDI Serial. FTDI is not part of CDC class, only to re-use CDC driver API #define CFG_TUH_CDC_CP210X 1 // CP210x Serial. CP210X is not part of CDC class, only to re-use CDC driver API +#define CFG_TUH_CDC_CH34X 1 // CH340 or CH341 Serial. CH34X is not part of CDC class, only to re-use CDC driver API #define CFG_TUH_HID (3*CFG_TUH_DEVICE_MAX) // typical keyboard + mouse device can have 3-4 HID interfaces #define CFG_TUH_MSC 1 #define CFG_TUH_VENDOR 0 @@ -118,7 +125,7 @@ // Set Line Coding on enumeration/mounted, value for cdc_line_coding_t // bit rate = 115200, 1 stop bit, no parity, 8 bit data width -#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CONDING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } +#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } #ifdef __cplusplus diff --git a/examples/host/cdc_msc_hid_freertos/CMakeLists.txt b/examples/host/cdc_msc_hid_freertos/CMakeLists.txt new file mode 100644 index 000000000..2e95a18e0 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/CMakeLists.txt @@ -0,0 +1,36 @@ +cmake_minimum_required(VERSION 3.17) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT} C CXX ASM) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +# Espressif has its own cmake build system +if(FAMILY STREQUAL "espressif") + return() +endif() + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/cdc_app.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/freertos_hook.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_host_example(${PROJECT} freertos) diff --git a/examples/host/cdc_msc_hid_freertos/Makefile b/examples/host/cdc_msc_hid_freertos/Makefile new file mode 100644 index 000000000..bf4725f47 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/Makefile @@ -0,0 +1,34 @@ +include ../../build_system/make/make.mk + +FREERTOS_SRC = lib/FreeRTOS-Kernel +FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) + +INC += \ + src \ + src/FreeRTOSConfig \ + $(TOP)/hw \ + $(TOP)/$(FREERTOS_SRC)/include \ + $(TOP)/$(FREERTOS_PORTABLE_SRC) \ + +# Example source +EXAMPLE_SOURCE = \ + src/cdc_app.c \ + src/freertos_hook.c \ + src/hid_app.c \ + src/main.c \ + src/msc_app.c \ + +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +# FreeRTOS source, all files in port folder +SRC_C += \ + $(FREERTOS_SRC)/list.c \ + $(FREERTOS_SRC)/queue.c \ + $(FREERTOS_SRC)/tasks.c \ + $(FREERTOS_SRC)/timers.c \ + $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c)) + +SRC_S += \ + $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s)) + +include ../../build_system/make/rules.mk diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt new file mode 100644 index 000000000..81d993ffa --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -0,0 +1,12 @@ +mcu:LPC175X_6X +mcu:LPC177X_8X +mcu:LPC18XX +mcu:LPC40XX +mcu:LPC43XX +mcu:MIMXRT1XXX +mcu:MIMXRT10XX +mcu:MIMXRT11XX +mcu:MSP432E4 +mcu:RX65X +mcu:RAXXX +mcu:MAX3421 diff --git a/examples/host/cdc_msc_hid_freertos/skip.txt b/examples/host/cdc_msc_hid_freertos/skip.txt new file mode 100644 index 000000000..2ba4438fd --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/skip.txt @@ -0,0 +1 @@ +mcu:RP2040 diff --git a/examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt b/examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt new file mode 100644 index 000000000..6f057c106 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt @@ -0,0 +1,6 @@ +# This file is for ESP-IDF only +idf_component_register(SRCS "cdc_app.c" "hid_app.c" "main.c" "msc_app.c" + INCLUDE_DIRS "." + REQUIRES boards tinyusb_src) + +target_compile_options(${COMPONENT_LIB} PRIVATE -Wno-error=format) diff --git a/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..bd754518d --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,199 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + +// Include MCU header +#include "bsp/board_mcu.h" + +#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 + #error "ESP32-Sx should use IDF's FreeRTOSConfig.h" +#endif + +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wredundant-decls" +#endif + +// TODO fix later +// FIXME cause redundant-decls warnings +#if CFG_TUSB_MCU == OPT_MCU_MM32F327X + extern u32 SystemCoreClock; +#else + extern uint32_t SystemCoreClock; +#endif + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE ( 1024 ) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 0 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +#ifdef __RX__ +/* Renesas RX series */ +#define vSoftwareInterruptISR INT_Excep_ICU_SWINT +#define vTickISR INT_Excep_CMT0_CMI0 +#define configPERIPHERAL_CLOCK_HZ (configCPU_CLOCK_HZ/2) +#define configKERNEL_INTERRUPT_PRIORITY 1 +#define configMAX_SYSCALL_INTERRUPT_PRIORITY 4 + +#else + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ +#if defined(__NVIC_PRIO_BITS) + // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h + #define configPRIO_BITS __NVIC_PRIO_BITS + +#elif defined(__ECLIC_INTCTLBITS) + // RISC-V Bumblebee core from nuclei + #define configPRIO_BITS __ECLIC_INTCTLBITS + +#elif defined(__IASMARM__) + // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS. + // Therefore we will hard coded it to minimum value of 2 to get pass ci build. + // IAR user must update this to correct value of the target MCU + #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU" + #define configPRIO_BITS 2 + +#else + #error "FreeRTOS configPRIO_BITS to be defined" +#endif + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<<configPRIO_BITS) - 1) + +/* The highest interrupt priority that can be used by any interrupt service +routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL +INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER +PRIORITY THAN THIS! (higher priorities are lower numeric values. */ +#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 2 + +/* Interrupt priorities used by the kernel port layer itself. These are generic +to all Cortex-M ports, and do not rely on any particular library functions. */ +#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! +See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ +#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +#endif + +#endif /* __FREERTOS_CONFIG__H */ diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c new file mode 100644 index 000000000..f3495ab28 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -0,0 +1,145 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2022, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb.h" +#include "bsp/board_api.h" + +#if TUP_MCU_ESPRESSIF +// ESP-IDF need "freertos/" prefix in include path. +// CFG_TUSB_OS_INC_PATH should be defined accordingly. + #include "freertos/FreeRTOS.h" + #include "freertos/semphr.h" + #include "freertos/queue.h" + #include "freertos/task.h" + #include "freertos/timers.h" + + #define CDC_STACK_SZIE 2048 +#else + #include "FreeRTOS.h" + #include "semphr.h" + #include "queue.h" + #include "task.h" + #include "timers.h" + + #define CDC_STACK_SZIE (3*configMINIMAL_STACK_SIZE/2) +#endif + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ +#if configSUPPORT_STATIC_ALLOCATION +StackType_t cdc_stack[CDC_STACK_SZIE]; +StaticTask_t cdc_taskdef; +#endif + +static void cdc_app_task(void* param); + +void cdc_app_init(void) { + #if configSUPPORT_STATIC_ALLOCATION + xTaskCreateStatic(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef); + #else + xTaskCreate(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL); + #endif +} + +// helper +size_t get_console_inputs(uint8_t *buf, size_t bufsize) { + size_t count = 0; + while (count < bufsize) { + int ch = board_getchar(); + if (ch <= 0) break; + + buf[count] = (uint8_t) ch; + count++; + } + + return count; +} + +static void cdc_app_task(void* param) { + (void) param; + + uint8_t buf[64 + 1]; // +1 for extra null character + uint32_t const bufsize = sizeof(buf) - 1; + + while (1) { + uint32_t count = get_console_inputs(buf, bufsize); + buf[count] = 0; + + if (count) { + // loop over all mounted interfaces + for (uint8_t idx = 0; idx < CFG_TUH_CDC; idx++) { + if (tuh_cdc_mounted(idx)) { + // console --> cdc interfaces + tuh_cdc_write(idx, buf, count); + tuh_cdc_write_flush(idx); + } + } + } + + vTaskDelay(1); + } +} + +//--------------------------------------------------------------------+ +// TinyUSB Callbacks +//--------------------------------------------------------------------+ + +// Invoked when received new data +void tuh_cdc_rx_cb(uint8_t idx) { + uint8_t buf[64 + 1]; // +1 for extra null character + uint32_t const bufsize = sizeof(buf) - 1; + + // forward cdc interfaces -> console + uint32_t count = tuh_cdc_read(idx, buf, bufsize); + buf[count] = 0; + + printf("%s", (char *) buf); +} + +void tuh_cdc_mount_cb(uint8_t idx) { + tuh_itf_info_t itf_info = { 0 }; + tuh_cdc_itf_get_info(idx, &itf_info); + + printf("CDC Interface is mounted: address = %u, itf_num = %u\r\n", itf_info.daddr, itf_info.desc.bInterfaceNumber); + +#ifdef CFG_TUH_CDC_LINE_CODING_ON_ENUM + // CFG_TUH_CDC_LINE_CODING_ON_ENUM must be defined for line coding is set by tinyusb in enumeration + // otherwise you need to call tuh_cdc_set_line_coding() first + cdc_line_coding_t line_coding = { 0 }; + if (tuh_cdc_get_local_line_coding(idx, &line_coding)) { + printf(" Baudrate: %" PRIu32 ", Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); + printf(" Parity : %u, Data Width: %u\r\n", line_coding.parity, line_coding.data_bits); + } +#endif +} + +void tuh_cdc_umount_cb(uint8_t idx) { + tuh_itf_info_t itf_info = { 0 }; + tuh_cdc_itf_get_info(idx, &itf_info); + + printf("CDC Interface is unmounted: address = %u, itf_num = %u\r\n", itf_info.daddr, itf_info.desc.bInterfaceNumber); +} diff --git a/examples/host/cdc_msc_hid_freertos/src/freertos_hook.c b/examples/host/cdc_msc_hid_freertos/src/freertos_hook.c new file mode 100644 index 000000000..07d159fd5 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/freertos_hook.c @@ -0,0 +1,111 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +//--------------------------------------------------------------------+ +// INCLUDE +//--------------------------------------------------------------------+ +#include "FreeRTOS.h" +#include "task.h" +#include "common/tusb_common.h" + +void vApplicationMallocFailedHook(void) { + taskDISABLE_INTERRUPTS(); + TU_ASSERT(false,); +} + +void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName) { + (void) pxTask; + (void) pcTaskName; + + taskDISABLE_INTERRUPTS(); + TU_ASSERT(false,); +} + +/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an + * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is + * used by the Idle task. */ +void vApplicationGetIdleTaskMemory(StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, + uint32_t *pulIdleTaskStackSize) { + /* If the buffers to be provided to the Idle task are declared inside this + * function then they must be declared static - otherwise they will be allocated on + * the stack and so not exists after this function exits. */ + static StaticTask_t xIdleTaskTCB; + static StackType_t uxIdleTaskStack[configMINIMAL_STACK_SIZE]; + + /* Pass out a pointer to the StaticTask_t structure in which the Idle task's + state will be stored. */ + *ppxIdleTaskTCBBuffer = &xIdleTaskTCB; + + /* Pass out the array that will be used as the Idle task's stack. */ + *ppxIdleTaskStackBuffer = uxIdleTaskStack; + + /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer. + Note that, as the array is necessarily of type StackType_t, + configMINIMAL_STACK_SIZE is specified in words, not bytes. */ + *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE; +} + +/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the + * application must provide an implementation of vApplicationGetTimerTaskMemory() + * to provide the memory that is used by the Timer service task. */ +void vApplicationGetTimerTaskMemory(StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, + uint32_t *pulTimerTaskStackSize) { + /* If the buffers to be provided to the Timer task are declared inside this + * function then they must be declared static - otherwise they will be allocated on + * the stack and so not exists after this function exits. */ + static StaticTask_t xTimerTaskTCB; + static StackType_t uxTimerTaskStack[configTIMER_TASK_STACK_DEPTH]; + + /* Pass out a pointer to the StaticTask_t structure in which the Timer + task's state will be stored. */ + *ppxTimerTaskTCBBuffer = &xTimerTaskTCB; + + /* Pass out the array that will be used as the Timer task's stack. */ + *ppxTimerTaskStackBuffer = uxTimerTaskStack; + + /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer. + Note that, as the array is necessarily of type StackType_t, + configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */ + *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH; +} + +#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X +#include "iodefine.h" +void vApplicationSetupTimerInterrupt(void) +{ + /* Enable CMT0 */ + SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1); + MSTP(CMT0) = 0; + SYSTEM.PRCR.WORD = (0xA5u<<8); + + CMT0.CMCNT = 0; + CMT0.CMCOR = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128); + CMT0.CMCR.WORD = TU_BIT(6) | 2; + IR(CMT0, CMI0) = 0; + IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY; + IEN(CMT0, CMI0) = 1; + CMT.CMSTR0.BIT.STR0 = 1; +} +#endif diff --git a/examples/host/cdc_msc_hid_freertos/src/hid_app.c b/examples/host/cdc_msc_hid_freertos/src/hid_app.c new file mode 100644 index 000000000..9ea5c1be0 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/hid_app.c @@ -0,0 +1,267 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "bsp/board_api.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +// If your host terminal support ansi escape code such as TeraTerm +// it can be use to simulate mouse cursor movement within terminal +#define USE_ANSI_ESCAPE 0 + +#define MAX_REPORT 4 + +static uint8_t const keycode2ascii[128][2] = { HID_KEYCODE_TO_ASCII }; + +// Each HID instance can has multiple reports +static struct { + uint8_t report_count; + tuh_hid_report_info_t report_info[MAX_REPORT]; +} hid_info[CFG_TUH_HID]; + +static void process_kbd_report(hid_keyboard_report_t const *report); +static void process_mouse_report(hid_mouse_report_t const *report); +static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len); + +void hid_app_init(void) { + // nothing to do +} + +//--------------------------------------------------------------------+ +// TinyUSB Callbacks +//--------------------------------------------------------------------+ + +// Invoked when device with hid interface is mounted +// Report descriptor is also available for use. tuh_hid_parse_report_descriptor() +// can be used to parse common/simple enough descriptor. +// Note: if report descriptor length > CFG_TUH_ENUMERATION_BUFSIZE, it will be skipped +// therefore report_desc = NULL, desc_len = 0 +void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const *desc_report, uint16_t desc_len) { + printf("HID device address = %d, instance = %d is mounted\r\n", dev_addr, instance); + + // Interface protocol (hid_interface_protocol_enum_t) + const char *protocol_str[] = { "None", "Keyboard", "Mouse" }; + uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); + + printf("HID Interface Protocol = %s\r\n", protocol_str[itf_protocol]); + + // By default host stack will use activate boot protocol on supported interface. + // Therefore for this simple example, we only need to parse generic report descriptor (with built-in parser) + if (itf_protocol == HID_ITF_PROTOCOL_NONE) { + hid_info[instance].report_count = tuh_hid_parse_report_descriptor(hid_info[instance].report_info, MAX_REPORT, + desc_report, desc_len); + printf("HID has %u reports \r\n", hid_info[instance].report_count); + } + + // request to receive report + // tuh_hid_report_received_cb() will be invoked when report is available + if (!tuh_hid_receive_report(dev_addr, instance)) { + printf("Error: cannot request to receive report\r\n"); + } +} + +// Invoked when device with hid interface is un-mounted +void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) { + printf("HID device address = %d, instance = %d is unmounted\r\n", dev_addr, instance); +} + +// Invoked when received report from device via interrupt endpoint +void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len) { + uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); + + switch (itf_protocol) { + case HID_ITF_PROTOCOL_KEYBOARD: + TU_LOG2("HID receive boot keyboard report\r\n"); + process_kbd_report((hid_keyboard_report_t const *) report); + break; + + case HID_ITF_PROTOCOL_MOUSE: + TU_LOG2("HID receive boot mouse report\r\n"); + process_mouse_report((hid_mouse_report_t const *) report); + break; + + default: + // Generic report requires matching ReportID and contents with previous parsed report info + process_generic_report(dev_addr, instance, report, len); + break; + } + + // continue to request to receive report + if (!tuh_hid_receive_report(dev_addr, instance)) { + printf("Error: cannot request to receive report\r\n"); + } +} + +//--------------------------------------------------------------------+ +// Keyboard +//--------------------------------------------------------------------+ + +// look up new key in previous keys +static inline bool find_key_in_report(hid_keyboard_report_t const *report, uint8_t keycode) { + for (uint8_t i = 0; i < 6; i++) { + if (report->keycode[i] == keycode) return true; + } + + return false; +} + +static void process_kbd_report(hid_keyboard_report_t const *report) { + static hid_keyboard_report_t prev_report = { 0, 0, { 0 } }; // previous report to check key released + + //------------- example code ignore control (non-printable) key affects -------------// + for (uint8_t i = 0; i < 6; i++) { + if (report->keycode[i]) { + if (find_key_in_report(&prev_report, report->keycode[i])) { + // exist in previous report means the current key is holding + } else { + // not existed in previous report means the current key is pressed + bool const is_shift = report->modifier & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT); + uint8_t ch = keycode2ascii[report->keycode[i]][is_shift ? 1 : 0]; + putchar(ch); + if (ch == '\r') putchar('\n'); // added new line for enter key + + #ifndef __ICCARM__ // TODO IAR doesn't support stream control ? + fflush(stdout); // flush right away, else nanolib will wait for newline + #endif + } + } + // TODO example skips key released + } + + prev_report = *report; +} + +//--------------------------------------------------------------------+ +// Mouse +//--------------------------------------------------------------------+ + +void cursor_movement(int8_t x, int8_t y, int8_t wheel) { +#if USE_ANSI_ESCAPE + // Move X using ansi escape + if ( x < 0) { + printf(ANSI_CURSOR_BACKWARD(%d), (-x)); // move left + }else if ( x > 0) { + printf(ANSI_CURSOR_FORWARD(%d), x); // move right + } + + // Move Y using ansi escape + if ( y < 0) { + printf(ANSI_CURSOR_UP(%d), (-y)); // move up + }else if ( y > 0) { + printf(ANSI_CURSOR_DOWN(%d), y); // move down + } + + // Scroll using ansi escape + if (wheel < 0) { + printf(ANSI_SCROLL_UP(%d), (-wheel)); // scroll up + }else if (wheel > 0) { + printf(ANSI_SCROLL_DOWN(%d), wheel); // scroll down + } + + printf("\r\n"); +#else + printf("(%d %d %d)\r\n", x, y, wheel); +#endif +} + +static void process_mouse_report(hid_mouse_report_t const *report) { + static hid_mouse_report_t prev_report = { 0 }; + + //------------- button state -------------// + uint8_t button_changed_mask = report->buttons ^ prev_report.buttons; + if (button_changed_mask & report->buttons) { + printf(" %c%c%c ", + report->buttons & MOUSE_BUTTON_LEFT ? 'L' : '-', + report->buttons & MOUSE_BUTTON_MIDDLE ? 'M' : '-', + report->buttons & MOUSE_BUTTON_RIGHT ? 'R' : '-'); + } + + //------------- cursor movement -------------// + cursor_movement(report->x, report->y, report->wheel); +} + +//--------------------------------------------------------------------+ +// Generic Report +//--------------------------------------------------------------------+ +static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len) { + (void) dev_addr; + + uint8_t const rpt_count = hid_info[instance].report_count; + tuh_hid_report_info_t *rpt_info_arr = hid_info[instance].report_info; + tuh_hid_report_info_t *rpt_info = NULL; + + if (rpt_count == 1 && rpt_info_arr[0].report_id == 0) { + // Simple report without report ID as 1st byte + rpt_info = &rpt_info_arr[0]; + } else { + // Composite report, 1st byte is report ID, data starts from 2nd byte + uint8_t const rpt_id = report[0]; + + // Find report id in the array + for (uint8_t i = 0; i < rpt_count; i++) { + if (rpt_id == rpt_info_arr[i].report_id) { + rpt_info = &rpt_info_arr[i]; + break; + } + } + + report++; + len--; + } + + if (!rpt_info) { + printf("Couldn't find report info !\r\n"); + return; + } + + // For complete list of Usage Page & Usage checkout src/class/hid/hid.h. For examples: + // - Keyboard : Desktop, Keyboard + // - Mouse : Desktop, Mouse + // - Gamepad : Desktop, Gamepad + // - Consumer Control (Media Key) : Consumer, Consumer Control + // - System Control (Power key) : Desktop, System Control + // - Generic (vendor) : 0xFFxx, xx + if (rpt_info->usage_page == HID_USAGE_PAGE_DESKTOP) { + switch (rpt_info->usage) { + case HID_USAGE_DESKTOP_KEYBOARD: + TU_LOG1("HID receive keyboard report\r\n"); + // Assume keyboard follow boot report layout + process_kbd_report((hid_keyboard_report_t const *) report); + break; + + case HID_USAGE_DESKTOP_MOUSE: + TU_LOG1("HID receive mouse report\r\n"); + // Assume mouse follow boot report layout + process_mouse_report((hid_mouse_report_t const *) report); + break; + + default: + break; + } + } +} diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c new file mode 100644 index 000000000..fa799aede --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -0,0 +1,180 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board_api.h" +#include "tusb.h" + +#if TUP_MCU_ESPRESSIF + // ESP-IDF need "freertos/" prefix in include path. + // CFG_TUSB_OS_INC_PATH should be defined accordingly. + #include "freertos/FreeRTOS.h" + #include "freertos/semphr.h" + #include "freertos/queue.h" + #include "freertos/task.h" + #include "freertos/timers.h" + + #define USBH_STACK_SIZE 4096 +#else + #include "FreeRTOS.h" + #include "semphr.h" + #include "queue.h" + #include "task.h" + #include "timers.h" + + // Increase stack size when debug log is enabled + #define USBH_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) +#endif + + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTOTYPES +//--------------------------------------------------------------------+ +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +// static timer & task +#if configSUPPORT_STATIC_ALLOCATION +StaticTimer_t blinky_tmdef; + +StackType_t usb_host_stack[USBH_STACK_SIZE]; +StaticTask_t usb_host_taskdef; +#endif + +TimerHandle_t blinky_tm; + +static void led_blinky_cb(TimerHandle_t xTimer); +static void usb_host_task(void* param); + +extern void cdc_app_init(void); +extern void hid_app_init(void); +extern void msc_app_init(void); + +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 +// API to read/rite MAX3421's register. Implemented by TinyUSB +extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); +extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); +#endif + +/*------------- MAIN -------------*/ +int main(void) { + board_init(); + + printf("TinyUSB Host CDC MSC HID with FreeRTOS Example\r\n"); + + // Create soft timer for blinky, task for tinyusb stack +#if configSUPPORT_STATIC_ALLOCATION + blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef); + xTaskCreateStatic(usb_host_task, "usbh", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_host_stack, &usb_host_taskdef); +#else + blinky_tm = xTimerCreate(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb); + xTaskCreate(usb_host_task, "usbd", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES-1, NULL); +#endif + + xTimerStart(blinky_tm, 0); + + // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 +#if !TUP_MCU_ESPRESSIF + vTaskStartScheduler(); +#endif + + return 0; +} + +#if TUP_MCU_ESPRESSIF +void app_main(void) { + main(); +} +#endif + +// USB Host task +// This top level thread process all usb events and invoke callbacks +static void usb_host_task(void *param) { + (void) param; + + // init host stack on configured roothub port + if (!tuh_init(BOARD_TUH_RHPORT)) { + printf("Failed to init USB Host Stack\r\n"); + vTaskSuspend(NULL); + } + + if (board_init_after_tusb) { + board_init_after_tusb(); + } + +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 + // FeatherWing MAX3421E use MAX3421E's GPIO0 for VBUS enable + enum { IOPINS1_ADDR = 20u << 3, /* 0xA0 */ }; + tuh_max3421_reg_write(BOARD_TUH_RHPORT, IOPINS1_ADDR, 0x01, false); +#endif + + cdc_app_init(); + hid_app_init(); + msc_app_init(); + + // RTOS forever loop + while (1) { + // put this thread to waiting state until there is new events + tuh_task(); + + // following code only run if tuh_task() process at least 1 event + } +} + +//--------------------------------------------------------------------+ +// TinyUSB Callbacks +//--------------------------------------------------------------------+ + +void tuh_mount_cb(uint8_t dev_addr) { + // application set-up + printf("A device with address %d is mounted\r\n", dev_addr); +} + +void tuh_umount_cb(uint8_t dev_addr) { + // application tear-down + printf("A device with address %d is unmounted \r\n", dev_addr); +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +static void led_blinky_cb(TimerHandle_t xTimer) { + (void) xTimer; + static bool led_state = false; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/examples/host/cdc_msc_hid_freertos/src/msc_app.c b/examples/host/cdc_msc_hid_freertos/src/msc_app.c new file mode 100644 index 000000000..9ffd5d965 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/msc_app.c @@ -0,0 +1,67 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +static scsi_inquiry_resp_t inquiry_resp; + +void msc_app_init(void) { + // nothing to do +} + +bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const *cb_data) { + msc_cbw_t const *cbw = cb_data->cbw; + msc_csw_t const *csw = cb_data->csw; + + if (csw->status != 0) { + printf("Inquiry failed\r\n"); + return false; + } + + // Print out Vendor ID, Product ID and Rev + printf("%.8s %.16s rev %.4s\r\n", inquiry_resp.vendor_id, inquiry_resp.product_id, inquiry_resp.product_rev); + + // Get capacity of device + uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); + uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun); + + printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024 * 1024) / block_size)); + printf("Block Count = %" PRIu32 ", Block Size: %" PRIu32 "\r\n", block_count, block_size); + + return true; +} + +//------------- IMPLEMENTATION -------------// +void tuh_msc_mount_cb(uint8_t dev_addr) { + printf("A MassStorage device is mounted\r\n"); + + uint8_t const lun = 0; + tuh_msc_inquiry(dev_addr, lun, &inquiry_resp, inquiry_complete_cb, 0); +} + +void tuh_msc_umount_cb(uint8_t dev_addr) { + (void) dev_addr; + printf("A MassStorage device is unmounted\r\n"); +} diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h new file mode 100644 index 000000000..0aab2cd2f --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -0,0 +1,140 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// Common Configuration +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_FREERTOS +#endif + +// Espressif IDF requires "freertos/" prefix in include path +#if TUP_MCU_ESPRESSIF +#define CFG_TUSB_OS_INC_PATH freertos/ +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUH_MEM_SECTION +#define CFG_TUH_MEM_SECTION +#endif + +#ifndef CFG_TUH_MEM_ALIGN +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + +//-------------------------------------------------------------------- +// Driver Configuration +//-------------------------------------------------------------------- + +// Size of buffer to hold descriptors and other data used for enumeration +#define CFG_TUH_ENUMERATION_BUFSIZE 256 + +#define CFG_TUH_HUB 1 // number of supported hubs +#define CFG_TUH_CDC 1 // CDC ACM +#define CFG_TUH_CDC_FTDI 1 // FTDI Serial. FTDI is not part of CDC class, only to re-use CDC driver API +#define CFG_TUH_CDC_CP210X 1 // CP210x Serial. CP210X is not part of CDC class, only to re-use CDC driver API +#define CFG_TUH_CDC_CH34X 1 // CH340 or CH341 Serial. CH34X is not part of CDC class, only to re-use CDC driver API +#define CFG_TUH_HID (3*CFG_TUH_DEVICE_MAX) // typical keyboard + mouse device can have 3-4 HID interfaces +#define CFG_TUH_MSC 1 +#define CFG_TUH_VENDOR 0 + +// max device support (excluding hub device): 1 hub typically has 4 ports +#define CFG_TUH_DEVICE_MAX (3*CFG_TUH_HUB + 1) + +//------------- HID -------------// +#define CFG_TUH_HID_EPIN_BUFSIZE 64 +#define CFG_TUH_HID_EPOUT_BUFSIZE 64 + +//------------- CDC -------------// + +// Set Line Control state on enumeration/mounted: +// DTR ( bit 0), RTS (bit 1) +#define CFG_TUH_CDC_LINE_CONTROL_ON_ENUM 0x03 + +// Set Line Coding on enumeration/mounted, value for cdc_line_coding_t +// bit rate = 115200, 1 stop bit, no parity, 8 bit data width +#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } + + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/examples/host/hid_controller/CMakeLists.txt b/examples/host/hid_controller/CMakeLists.txt index d1d901b53..c1b500dd8 100644 --- a/examples/host/hid_controller/CMakeLists.txt +++ b/examples/host/hid_controller/CMakeLists.txt @@ -10,6 +10,11 @@ project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +# Espressif has its own cmake build system +if(FAMILY STREQUAL "espressif") + return() +endif() + add_executable(${PROJECT}) # Example source @@ -26,8 +31,3 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. family_configure_host_example(${PROJECT} noos) - -# Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host -if(FAMILY STREQUAL "rp2040") - family_add_pico_pio_usb(${PROJECT}) -endif() diff --git a/examples/host/hid_controller/Makefile b/examples/host/hid_controller/Makefile index cda2977bc..1377f1f90 100644 --- a/examples/host/hid_controller/Makefile +++ b/examples/host/hid_controller/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -11,14 +11,4 @@ EXAMPLE_SOURCE += \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -# TinyUSB Host Stack source -SRC_C += \ - src/class/cdc/cdc_host.c \ - src/class/hid/hid_host.c \ - src/class/msc/msc_host.c \ - src/host/hub.c \ - src/host/usbh.c \ - src/portable/ohci/ohci.c \ - src/portable/nxp/lpc17_40/hcd_lpc17_40.c - -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index 45da6c3f2..fee10f9e2 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -1,3 +1,4 @@ +mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX @@ -9,3 +10,5 @@ mcu:MIMXRT11XX mcu:RP2040 mcu:MSP432E4 mcu:RX65X +mcu:RAXXX +mcu:MAX3421 diff --git a/examples/host/hid_controller/src/hid_app.c b/examples/host/hid_controller/src/hid_app.c index 76de97b41..bff830ca2 100644 --- a/examples/host/hid_controller/src/hid_app.c +++ b/examples/host/hid_controller/src/hid_app.c @@ -23,7 +23,7 @@ * */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" /* From https://www.kernel.org/doc/html/latest/input/gamepad.html diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c index 4dcc92587..05a5ae176 100644 --- a/examples/host/hid_controller/src/main.c +++ b/examples/host/hid_controller/src/main.c @@ -32,7 +32,7 @@ #include <stdio.h> #include <string.h> -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ @@ -54,6 +54,10 @@ int main(void) // init host stack on configured roothub port tuh_init(BOARD_TUH_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { // tinyusb host task diff --git a/examples/host/hid_controller/src/tusb_config.h b/examples/host/hid_controller/src/tusb_config.h index d37fc02d2..3ac591d8f 100644 --- a/examples/host/hid_controller/src/tusb_config.h +++ b/examples/host/hid_controller/src/tusb_config.h @@ -30,28 +30,8 @@ extern "C" { #endif -//--------------------------------------------------------------------+ -// Board Specific Configuration -//--------------------------------------------------------------------+ - - #if CFG_TUSB_MCU == OPT_MCU_RP2040 -// change to 1 if using pico-pio-usb as host controller for raspberry rp2040 -#define CFG_TUH_RPI_PIO_USB 0 -#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -#endif - -// RHPort number used for host can be defined by board.mk, default to port 0 -#ifndef BOARD_TUH_RHPORT -#define BOARD_TUH_RHPORT 0 -#endif - -// RHPort max operational speed can defined by board.mk -#ifndef BOARD_TUH_MAX_SPEED -#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED -#endif - //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- // defined by compiler flags for flexibility @@ -67,12 +47,6 @@ #define CFG_TUSB_DEBUG 0 #endif -// Enable Host stack -#define CFG_TUH_ENABLED 1 - -// Default is max speed that hardware controller could support with on-chip PHY -#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED - /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -85,11 +59,43 @@ #endif #ifndef CFG_TUH_MEM_ALIGN -#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif //-------------------------------------------------------------------- -// CONFIGURATION +// Driver Configuration //-------------------------------------------------------------------- // Size of buffer to hold descriptors and other data used for enumeration diff --git a/examples/host/msc_file_explorer/CMakeLists.txt b/examples/host/msc_file_explorer/CMakeLists.txt index 99c797275..1a57c7466 100644 --- a/examples/host/msc_file_explorer/CMakeLists.txt +++ b/examples/host/msc_file_explorer/CMakeLists.txt @@ -10,6 +10,11 @@ project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +# Espressif has its own cmake build system +if(FAMILY STREQUAL "espressif") + return() +endif() + add_executable(${PROJECT}) # Example source @@ -22,11 +27,13 @@ target_sources(${PROJECT} PUBLIC ) # Suppress warnings on fatfs -set_source_files_properties( - ${TOP}/lib/fatfs/source/ff.c - PROPERTIES - COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual" -) +if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + set_source_files_properties( + ${TOP}/lib/fatfs/source/ff.c + PROPERTIES + COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual" + ) +endif () # Example include target_include_directories(${PROJECT} PUBLIC @@ -38,8 +45,3 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. family_configure_host_example(${PROJECT} noos) - -# Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host -if(FAMILY STREQUAL "rp2040") - family_add_pico_pio_usb(${PROJECT}) -endif() diff --git a/examples/host/msc_file_explorer/Makefile b/examples/host/msc_file_explorer/Makefile index 1fda72b18..c7d6a7cae 100644 --- a/examples/host/msc_file_explorer/Makefile +++ b/examples/host/msc_file_explorer/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk FATFS_PATH = lib/fatfs/source @@ -24,14 +24,4 @@ SRC_C += \ # suppress warning caused by fatfs CFLAGS += -Wno-error=cast-qual -# TinyUSB Host Stack source -SRC_C += \ - src/class/cdc/cdc_host.c \ - src/class/hid/hid_host.c \ - src/class/msc/msc_host.c \ - src/host/hub.c \ - src/host/usbh.c \ - src/portable/ohci/ohci.c \ - src/portable/nxp/lpc17_40/hcd_lpc17_40.c - -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index 45da6c3f2..fee10f9e2 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -1,3 +1,4 @@ +mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX @@ -9,3 +10,5 @@ mcu:MIMXRT11XX mcu:RP2040 mcu:MSP432E4 mcu:RX65X +mcu:RAXXX +mcu:MAX3421 diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 7b1c2ef27..f6b6810f5 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -59,7 +59,7 @@ #include <stdio.h> #include <string.h> -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ @@ -72,18 +72,21 @@ extern bool msc_app_init(void); extern void msc_app_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); printf("TinyUSB Host MassStorage Explorer Example\r\n"); // init host stack on configured roothub port tuh_init(BOARD_TUH_RHPORT); + + if (board_init_after_tusb) { + board_init_after_tusb(); + } + msc_app_init(); - while (1) - { + while (1) { // tinyusb host task tuh_task(); @@ -98,28 +101,25 @@ int main(void) // TinyUSB Callbacks //--------------------------------------------------------------------+ -void tuh_mount_cb(uint8_t dev_addr) -{ +void tuh_mount_cb(uint8_t dev_addr) { (void) dev_addr; } -void tuh_umount_cb(uint8_t dev_addr) -{ +void tuh_umount_cb(uint8_t dev_addr) { (void) dev_addr; } //--------------------------------------------------------------------+ // Blinking Task //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { const uint32_t interval_ms = 1000; static uint32_t start_ms = 0; static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < interval_ms) return; // not enough time + if (board_millis() - start_ms < interval_ms) return; // not enough time start_ms += interval_ms; board_led_write(led_state); diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index 003e2865b..ddd39c674 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -25,7 +25,7 @@ #include <ctype.h> #include "tusb.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "ff.h" #include "diskio.h" @@ -66,7 +66,10 @@ bool msc_app_init(void) for(size_t i=0; i<CFG_TUH_DEVICE_MAX; i++) _disk_busy[i] = false; // disable stdout buffered for echoing typing command + #ifndef __ICCARM__ // TODO IAR doesn't support stream control ? setbuf(stdout, NULL); + #endif + cli_init(); return true; @@ -92,7 +95,6 @@ void msc_app_task(void) // //--------------------------------------------------------------------+ - bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) { msc_cbw_t const* cbw = cb_data->cbw; @@ -111,7 +113,7 @@ bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_da uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun); - printf("Disk Size: %lu MB\r\n", block_count / ((1024*1024)/block_size)); + printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024*1024)/block_size)); // printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size); // For simplicity: we only mount 1 LUN per device @@ -538,10 +540,10 @@ void cli_cmd_ls(EmbeddedCli *cli, char *args, void *context) printf("%-40s", fno.fname); if (fno.fsize < 1024) { - printf("%lu B\r\n", fno.fsize); + printf("%" PRIu32 " B\r\n", fno.fsize); }else { - printf("%lu KB\r\n", fno.fsize / 1024); + printf("%" PRIu32 " KB\r\n", fno.fsize / 1024); } } } diff --git a/examples/host/msc_file_explorer/src/tusb_config.h b/examples/host/msc_file_explorer/src/tusb_config.h index 1e0d067bf..c798b4383 100644 --- a/examples/host/msc_file_explorer/src/tusb_config.h +++ b/examples/host/msc_file_explorer/src/tusb_config.h @@ -30,28 +30,8 @@ extern "C" { #endif -//--------------------------------------------------------------------+ -// Board Specific Configuration -//--------------------------------------------------------------------+ - -#if CFG_TUSB_MCU == OPT_MCU_RP2040 -// change to 1 if using pico-pio-usb as host controller for raspberry rp2040 -#define CFG_TUH_RPI_PIO_USB 0 -#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -#endif - -// RHPort number used for host can be defined by board.mk, default to port 0 -#ifndef BOARD_TUH_RHPORT -#define BOARD_TUH_RHPORT 0 -#endif - -// RHPort max operational speed can defined by board.mk -#ifndef BOARD_TUH_MAX_SPEED -#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED -#endif - //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- // defined by compiler flags for flexibility @@ -67,12 +47,6 @@ #define CFG_TUSB_DEBUG 0 #endif -// Enable Host stack -#define CFG_TUH_ENABLED 1 - -// Default is max speed that hardware controller could support with on-chip PHY -#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED - /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -85,11 +59,43 @@ #endif #ifndef CFG_TUH_MEM_ALIGN -#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif //-------------------------------------------------------------------- -// CONFIGURATION +// Driver Configuration //-------------------------------------------------------------------- // Size of buffer to hold descriptors and other data used for enumeration |