diff options
Diffstat (limited to 'examples/rules.mk')
| -rw-r--r-- | examples/rules.mk | 34 |
1 files changed, 28 insertions, 6 deletions
diff --git a/examples/rules.mk b/examples/rules.mk index 0343391cb..2f4c8b860 100644 --- a/examples/rules.mk +++ b/examples/rules.mk @@ -1,6 +1,25 @@ -# -# Common make definition for all examples -# +# --------------------------------------- +# Common make rules for all examples +# --------------------------------------- + +ifeq ($(CROSS_COMPILE),xtensa-esp32s2-elf-) +# Espressif IDF use CMake build system, this add wrapper target to call idf.py + +.PHONY: all clean flash +.DEFAULT_GOAL := all + +all: + idf.py -B$(BUILD) -DBOARD=$(BOARD) build + +clean: + idf.py -B$(BUILD) clean + +flash: + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyUSB0) + idf.py -B$(BUILD) -p $(SERIAL) flash + +else +# GNU Make build system # libc LIBS += -lgcc -lm -lnosys @@ -15,21 +34,22 @@ SRC_C += \ src/common/tusb_fifo.c \ src/device/usbd.c \ src/device/usbd_control.c \ - src/class/msc/msc_device.c \ src/class/cdc/cdc_device.c \ src/class/dfu/dfu_rt_device.c \ src/class/hid/hid_device.c \ src/class/midi/midi_device.c \ + src/class/msc/msc_device.c \ + src/class/net/net_device.c \ src/class/usbtmc/usbtmc_device.c \ src/class/vendor/vendor_device.c \ - src/class/net/net_device.c \ src/portable/$(VENDOR)/$(CHIP_FAMILY)/dcd_$(CHIP_FAMILY).c # TinyUSB stack include INC += $(TOP)/src -# CFLAGS += $(addprefix -I,$(INC)) + +# TODO Skip nanolib for MSP430 ifeq ($(BOARD), msp_exp430f5529lp) LDFLAGS += $(CFLAGS) -fshort-enums -Wl,-T,$(TOP)/$(LD_FILE) -Wl,[email protected] -Wl,-cref -Wl,-gc-sections else @@ -135,3 +155,5 @@ flash-jlink: $(BUILD)/$(BOARD)-firmware.hex # flash STM32 MCU using stlink with STM32 Cube Programmer CLI flash-stlink: $(BUILD)/$(BOARD)-firmware.elf STM32_Programmer_CLI --connect port=swd --write $< --go + +endif # Make target |