diff options
Diffstat (limited to 'examples')
| -rw-r--r-- | examples/device/cdc_msc_hid/Makefile | 186 | ||||
| -rw-r--r-- | examples/device/msc_dual_lun/Makefile | 187 | ||||
| -rw-r--r-- | examples/make.mk | 65 | ||||
| -rw-r--r-- | examples/rules.mk | 111 |
4 files changed, 192 insertions, 357 deletions
diff --git a/examples/device/cdc_msc_hid/Makefile b/examples/device/cdc_msc_hid/Makefile index 69bffaace..4ff3371dc 100644 --- a/examples/device/cdc_msc_hid/Makefile +++ b/examples/device/cdc_msc_hid/Makefile @@ -1,185 +1,15 @@ include ../../../tools/top.mk +include ../../make.mk -# Select the board to build for. -ifeq ($(BOARD),) - $(info You must provide a BOARD parameter with 'BOARD=') - $(info Possible values are:) - $(info $(sort $(subst /.,,$(subst $(TOP)/hw/bsp/,,$(wildcard $(TOP)/hw/bsp/*/.))))) - $(error BOARD not defined) -else - ifeq ($(wildcard $(TOP)/hw/bsp/$(BOARD)/.),) - $(error Invalid BOARD specified) - endif -endif - -# Verbose mode (V=). 0: default, 1: print out CFLAG, LDFLAG 2: print all compile command -ifeq ("$(V)","2") - QUIET = -else - QUIET = @ -endif - -# If the build directory is not given, make it reflect the board name. -BUILD ?= build-$(BOARD) - -CROSS_COMPILE = arm-none-eabi- - -include $(TOP)/hw/bsp/$(BOARD)/board.mk - -CC = $(CROSS_COMPILE)gcc -CXX = $(CROSS_COMPILE)g++ -OBJCOPY = $(CROSS_COMPILE)objcopy -SIZE = $(CROSS_COMPILE)size -MKDIR = mkdir -SED = sed -CP = cp -RM = rm - -INC += -Isrc \ - -I$(TOP)/hw \ - -I$(TOP)/src - -CFLAGS += \ - -fsingle-precision-constant \ - -fno-strict-aliasing \ - -Wdouble-promotion \ - -Wno-endif-labels \ - -Wstrict-prototypes \ - -Werror-implicit-function-declaration \ - -Wfloat-equal \ - -Wundef \ - -Wshadow \ - -Wwrite-strings \ - -Wsign-compare \ - -Wmissing-format-attribute \ - -Wno-deprecated-declarations \ - -Wnested-externs \ - -Wunreachable-code \ - -Wno-error=lto-type-mismatch \ - -ffunction-sections \ - -fdata-sections - -# This causes lots of warning with nrf5x build due to nrfx code -# CFLAGS += -Wcast-align - -#Debugging/Optimization -ifeq ($(DEBUG), 1) - CFLAGS += -O0 -ggdb -else - CFLAGS += -flto -Os -endif - -CFLAGS += $(INC) -Wall -Werror -std=gnu11 -DBOARD_$(shell echo $(BOARD) | tr '[:lower:]' '[:upper:]') -LDFLAGS += $(CFLAGS) -fshort-enums -Wl,-T,$(TOP)/$(LD_FILE) -Wl,[email protected] -Wl,-cref -Wl,-gc-sections -specs=nosys.specs -specs=nano.specs - -ifeq ("$(V)","1") -$(info CFLAGS $(CFLAGS)) -$(info ) -$(info LDFLAGS $(LDFLAGS)) -$(info ) -$(info ASFLAGS $(ASFLAGS)) -$(info ) -endif - -LIBS = -lgcc -lc -lm -lnosys +INC += \ + src \ + $(TOP)/hw \ +# Example source EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -LIB_SOURCE += \ - hw/bsp/$(BOARD)/board_$(BOARD).c \ - src/common/tusb_fifo.c \ - src/device/usbd.c \ - src/device/usbd_control.c \ - src/class/msc/msc_device.c \ - src/class/cdc/cdc_device.c \ - src/class/hid/hid_device.c \ - src/tusb.c \ - src/portable/$(VENDOR)/$(CHIP_FAMILY)/dcd_$(CHIP_FAMILY).c - -SRC_C += $(LIB_SOURCE) - -# Assembly files can be name with upper case .S, convert it to .s -SRC_S := $(SRC_S:.S=.s) - -# Due to GCC LTO bug https://bugs.launchpad.net/gcc-arm-embedded/+bug/1747966 -# assembly file should be placed first in linking order -OBJ += $(addprefix $(BUILD)/obj/, $(SRC_S:.s=.o)) -OBJ += $(addprefix $(BUILD)/obj/, $(SRC_C:.c=.o)) - -# Set all as default goal -.DEFAULT_GOAL := all -all: $(BUILD)/$(BOARD)-firmware.bin size - -OBJ_DIRS = $(sort $(dir $(OBJ))) -$(OBJ): | $(OBJ_DIRS) -$(OBJ_DIRS): - @$(MKDIR) -p $@ - -$(BUILD)/$(BOARD)-firmware.elf: $(OBJ) - @echo LINK $@ - $(QUIET)$(CC) -o $@ $(LDFLAGS) $^ -Wl,--start-group $(LIBS) -Wl,--end-group - -$(BUILD)/$(BOARD)-firmware.bin: $(BUILD)/$(BOARD)-firmware.elf - @echo CREATE $@ - @$(OBJCOPY) -O binary -j .vectors -j .text -j .data $^ $@ - -$(BUILD)/$(BOARD)-firmware.hex: $(BUILD)/$(BOARD)-firmware.elf - @echo CREATE $@ - @$(OBJCOPY) -O ihex $^ $@ - -# We set vpath to point to the top of the tree so that the source files -# can be located. By following this scheme, it allows a single build rule -# to be used to compile all .c files. -vpath %.c . $(TOP) -$(BUILD)/obj/%.o: %.c - @echo CC $(notdir $@) - $(QUIET)$(CC) $(CFLAGS) -c -MD -o $@ $< - @# The following fixes the dependency file. - @# See http://make.paulandlesley.org/autodep.html for details. - @# Regex adjusted from the above to play better with Windows paths, etc. - @$(CP) $(@:.o=.d) $(@:.o=.P); \ - $(SED) -e 's/#.*//' -e 's/^.*: *//' -e 's/ *\\$$//' \ - -e '/^$$/ d' -e 's/$$/ :/' < $(@:.o=.d) >> $(@:.o=.P); \ - $(RM) $(@:.o=.d) - -# ASM sources lower case .s -vpath %.s . $(TOP) -$(BUILD)/obj/%.o: %.s - @echo AS $(notdir $@) - $(QUIET)$(CC) -x assembler-with-cpp $(ASFLAGS) -c -o $@ $< - -# ASM sources upper case .S -vpath %.S . $(TOP) -$(BUILD)/obj/%.o: %.S - @echo AS $(notdir $@) - $(QUIET)$(CC) -x assembler-with-cpp $(ASFLAGS) -c -o $@ $< - -# Flash binary using Jlink, should be added into system path -ifeq ($(OS),Windows_NT) - JLINKEXE = JLink.exe -else - JLINKEXE = JLinkExe -endif - -# default jlink interface is swd -ifeq ($(JLINK_IF),) - JLINK_IF = swd -endif - -# Flash using jlink -flash-jlink: $(BUILD)/$(BOARD)-firmware.hex - @echo halt > $(BUILD)/$(BOARD).jlink - @echo loadfile $^ >> $(BUILD)/$(BOARD).jlink - @echo r >> $(BUILD)/$(BOARD).jlink - @echo go >> $(BUILD)/$(BOARD).jlink - @echo exit >> $(BUILD)/$(BOARD).jlink - $(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -speed auto -CommandFile $(BUILD)/$(BOARD).jlink - -size: $(BUILD)/$(BOARD)-firmware.elf - -@echo '' - @$(SIZE) $< - -@echo '' +# Board source +SRC_C += hw/bsp/$(BOARD)/board_$(BOARD).c -clean: - rm -rf build-$(BOARD) +include ../../rules.mk diff --git a/examples/device/msc_dual_lun/Makefile b/examples/device/msc_dual_lun/Makefile index 1a9f9d135..59eeacf4d 100644 --- a/examples/device/msc_dual_lun/Makefile +++ b/examples/device/msc_dual_lun/Makefile @@ -1,186 +1,15 @@ include ../../../tools/top.mk +include ../../make.mk -# Select the board to build for. -ifeq ($(BOARD),) - $(info You must provide a BOARD parameter with 'BOARD=') - $(info Possible values are:) - $(info $(sort $(subst /.,,$(subst $(TOP)/hw/bsp/,,$(wildcard $(TOP)/hw/bsp/*/.))))) - $(error BOARD not defined) -else - ifeq ($(wildcard $(TOP)/hw/bsp/$(BOARD)/.),) - $(error Invalid BOARD specified) - endif -endif - -# Verbose mode (V=). 0: default, 1: print out CFLAG, LDFLAG 2: print all compile command -ifeq ("$(V)","2") - QUIET = -else - QUIET = @ -endif - -# If the build directory is not given, make it reflect the board name. -BUILD ?= build-$(BOARD) - -CROSS_COMPILE = arm-none-eabi- - -include $(TOP)/hw/bsp/$(BOARD)/board.mk - -CC = $(CROSS_COMPILE)gcc -CXX = $(CROSS_COMPILE)g++ -OBJCOPY = $(CROSS_COMPILE)objcopy -SIZE = $(CROSS_COMPILE)size -MKDIR = mkdir -SED = sed -CP = cp -RM = rm - -INC += -Isrc \ - -I$(TOP)/hw \ - -I$(TOP)/src - -CFLAGS += \ - -fsingle-precision-constant \ - -fno-strict-aliasing \ - -Wdouble-promotion \ - -Wno-endif-labels \ - -Wstrict-prototypes \ - -Werror-implicit-function-declaration \ - -Wfloat-equal \ - -Wundef \ - -Wshadow \ - -Wwrite-strings \ - -Wsign-compare \ - -Wmissing-format-attribute \ - -Wno-deprecated-declarations \ - -Wnested-externs \ - -Wunreachable-code \ - -Wno-error=lto-type-mismatch \ - -ffunction-sections \ - -fdata-sections - -# This causes lots of warning with nrf5x build due to nrfx code -# CFLAGS += -Wcast-align - -#Debugging/Optimization -ifeq ($(DEBUG), 1) - CFLAGS += -O0 -ggdb -else - CFLAGS += -flto -Os -endif - -CFLAGS += $(INC) -Wall -Werror -std=gnu11 -DBOARD_$(shell echo $(BOARD) | tr '[:lower:]' '[:upper:]') -LDFLAGS += $(CFLAGS) -fshort-enums -Wl,-T,$(TOP)/$(LD_FILE) -Wl,[email protected] -Wl,-cref -Wl,-gc-sections -specs=nosys.specs -specs=nano.specs - -ifeq ("$(V)","1") -$(info CFLAGS $(CFLAGS)) -$(info ) -$(info LDFLAGS $(LDFLAGS)) -$(info ) -$(info ASFLAGS $(ASFLAGS)) -$(info ) -endif - -LIBS = -lgcc -lc -lm -lnosys +INC += \ + src \ + $(TOP)/hw \ +# Example source EXAMPLE_SOURCE += $(wildcard src/*.c) - SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -LIB_SOURCE += \ - hw/bsp/$(BOARD)/board_$(BOARD).c \ - src/common/tusb_fifo.c \ - src/device/usbd.c \ - src/device/usbd_control.c \ - src/class/msc/msc_device.c \ - src/class/cdc/cdc_device.c \ - src/class/hid/hid_device.c \ - src/tusb.c \ - src/portable/$(VENDOR)/$(CHIP_FAMILY)/dcd_$(CHIP_FAMILY).c - -SRC_C += $(LIB_SOURCE) - -# Assembly files can be name with upper case .S, convert it to .s -SRC_S := $(SRC_S:.S=.s) - -# Due to GCC LTO bug https://bugs.launchpad.net/gcc-arm-embedded/+bug/1747966 -# assembly file should be placed first in linking order -OBJ += $(addprefix $(BUILD)/obj/, $(SRC_S:.s=.o)) -OBJ += $(addprefix $(BUILD)/obj/, $(SRC_C:.c=.o)) - -# Set all as default goal -.DEFAULT_GOAL := all -all: $(BUILD)/$(BOARD)-firmware.bin size - -OBJ_DIRS = $(sort $(dir $(OBJ))) -$(OBJ): | $(OBJ_DIRS) -$(OBJ_DIRS): - @$(MKDIR) -p $@ - -$(BUILD)/$(BOARD)-firmware.elf: $(OBJ) - @echo LINK $@ - $(QUIET)$(CC) -o $@ $(LDFLAGS) $^ -Wl,--start-group $(LIBS) -Wl,--end-group - -$(BUILD)/$(BOARD)-firmware.bin: $(BUILD)/$(BOARD)-firmware.elf - @echo CREATE $@ - @$(OBJCOPY) -O binary -j .vectors -j .text -j .data $^ $@ - -$(BUILD)/$(BOARD)-firmware.hex: $(BUILD)/$(BOARD)-firmware.elf - @echo CREATE $@ - @$(OBJCOPY) -O ihex $^ $@ - -# We set vpath to point to the top of the tree so that the source files -# can be located. By following this scheme, it allows a single build rule -# to be used to compile all .c files. -vpath %.c . $(TOP) -$(BUILD)/obj/%.o: %.c - @echo CC $(notdir $@) - $(QUIET)$(CC) $(CFLAGS) -c -MD -o $@ $< - @# The following fixes the dependency file. - @# See http://make.paulandlesley.org/autodep.html for details. - @# Regex adjusted from the above to play better with Windows paths, etc. - @$(CP) $(@:.o=.d) $(@:.o=.P); \ - $(SED) -e 's/#.*//' -e 's/^.*: *//' -e 's/ *\\$$//' \ - -e '/^$$/ d' -e 's/$$/ :/' < $(@:.o=.d) >> $(@:.o=.P); \ - $(RM) $(@:.o=.d) - -# ASM sources lower case .s -vpath %.s . $(TOP) -$(BUILD)/obj/%.o: %.s - @echo AS $(notdir $@) - $(QUIET)$(CC) -x assembler-with-cpp $(ASFLAGS) -c -o $@ $< - -# ASM sources upper case .S -vpath %.S . $(TOP) -$(BUILD)/obj/%.o: %.S - @echo AS $(notdir $@) - $(QUIET)$(CC) -x assembler-with-cpp $(ASFLAGS) -c -o $@ $< - -# Flash binary using Jlink, should be added into system path -ifeq ($(OS),Windows_NT) - JLINKEXE = JLink.exe -else - JLINKEXE = JLinkExe -endif - -# default jlink interface is swd -ifeq ($(JLINK_IF),) - JLINK_IF = swd -endif - -# Flash using jlink -flash-jlink: $(BUILD)/$(BOARD)-firmware.hex - @echo halt > $(BUILD)/$(BOARD).jlink - @echo loadfile $^ >> $(BUILD)/$(BOARD).jlink - @echo r >> $(BUILD)/$(BOARD).jlink - @echo go >> $(BUILD)/$(BOARD).jlink - @echo exit >> $(BUILD)/$(BOARD).jlink - $(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -speed auto -CommandFile $(BUILD)/$(BOARD).jlink - -size: $(BUILD)/$(BOARD)-firmware.elf - -@echo '' - @$(SIZE) $< - -@echo '' +# Board source +SRC_C += hw/bsp/$(BOARD)/board_$(BOARD).c -clean: - rm -rf build-$(BOARD) +include ../../rules.mk diff --git a/examples/make.mk b/examples/make.mk new file mode 100644 index 000000000..d76f611fb --- /dev/null +++ b/examples/make.mk @@ -0,0 +1,65 @@ +# +# Common make definition for all examples +# + +# Compiler +CROSS_COMPILE = arm-none-eabi- +CC = $(CROSS_COMPILE)gcc +CXX = $(CROSS_COMPILE)g++ +OBJCOPY = $(CROSS_COMPILE)objcopy +SIZE = $(CROSS_COMPILE)size +MKDIR = mkdir +SED = sed +CP = cp +RM = rm + +# Select the board to build for. +ifeq ($(BOARD),) + $(info You must provide a BOARD parameter with 'BOARD=') + $(info Possible values are:) + $(info $(sort $(subst /.,,$(subst $(TOP)/hw/bsp/,,$(wildcard $(TOP)/hw/bsp/*/.))))) + $(error BOARD not defined) +else + ifeq ($(wildcard $(TOP)/hw/bsp/$(BOARD)/.),) + $(error Invalid BOARD specified) + endif +endif + +# Build directory +BUILD = build-$(BOARD) + +# Board specific +include $(TOP)/hw/bsp/$(BOARD)/board.mk + +# Compiler Flags +CFLAGS += \ + -fsingle-precision-constant \ + -fno-strict-aliasing \ + -Wdouble-promotion \ + -Wno-endif-labels \ + -Wstrict-prototypes \ + -Wall \ + -Werror \ + -Werror-implicit-function-declaration \ + -Wfloat-equal \ + -Wundef \ + -Wshadow \ + -Wwrite-strings \ + -Wsign-compare \ + -Wmissing-format-attribute \ + -Wno-deprecated-declarations \ + -Wnested-externs \ + -Wunreachable-code \ + -Wno-error=lto-type-mismatch \ + -ffunction-sections \ + -fdata-sections + +# This causes lots of warning with nrf5x build due to nrfx code +# CFLAGS += -Wcast-align + +# Debugging/Optimization +ifeq ($(DEBUG), 1) + CFLAGS += -O0 -ggdb +else + CFLAGS += -flto -Os +endif diff --git a/examples/rules.mk b/examples/rules.mk new file mode 100644 index 000000000..df9ffb7e5 --- /dev/null +++ b/examples/rules.mk @@ -0,0 +1,111 @@ +# +# Common make definition for all examples +# + +# libc +LIBS = -lgcc -lc -lm -lnosys + +# TinyUSB Stack source +SRC_C += \ + src/common/tusb_fifo.c \ + src/device/usbd.c \ + src/device/usbd_control.c \ + src/class/msc/msc_device.c \ + src/class/cdc/cdc_device.c \ + src/class/hid/hid_device.c \ + src/tusb.c \ + src/portable/$(VENDOR)/$(CHIP_FAMILY)/dcd_$(CHIP_FAMILY).c + +# TinyUSB stack include +INC += $(TOP)/src + +# +CFLAGS += $(addprefix -I,$(INC)) +LDFLAGS += $(CFLAGS) -fshort-enums -Wl,-T,$(TOP)/$(LD_FILE) -Wl,[email protected] -Wl,-cref -Wl,-gc-sections -specs=nosys.specs -specs=nano.specs + +# Assembly files can be name with upper case .S, convert it to .s +SRC_S := $(SRC_S:.S=.s) + +# Due to GCC LTO bug https://bugs.launchpad.net/gcc-arm-embedded/+bug/1747966 +# assembly file should be placed first in linking order +OBJ += $(addprefix $(BUILD)/obj/, $(SRC_S:.s=.o)) +OBJ += $(addprefix $(BUILD)/obj/, $(SRC_C:.c=.o)) + +# Verbose mode +ifeq ("$(V)","1") +$(info CFLAGS $(CFLAGS) ) $(info ) +$(info LDFLAGS $(LDFLAGS)) $(info ) +$(info ASFLAGS $(ASFLAGS)) $(info ) +endif + +# Set all as default goal +.DEFAULT_GOAL := all +all: $(BUILD)/$(BOARD)-firmware.bin size + +OBJ_DIRS = $(sort $(dir $(OBJ))) +$(OBJ): | $(OBJ_DIRS) +$(OBJ_DIRS): + @$(MKDIR) -p $@ + +$(BUILD)/$(BOARD)-firmware.elf: $(OBJ) + @echo LINK $@ + @$(CC) -o $@ $(LDFLAGS) $^ -Wl,--start-group $(LIBS) -Wl,--end-group + +$(BUILD)/$(BOARD)-firmware.bin: $(BUILD)/$(BOARD)-firmware.elf + @echo CREATE $@ + @$(OBJCOPY) -O binary -j .vectors -j .text -j .data $^ $@ + +$(BUILD)/$(BOARD)-firmware.hex: $(BUILD)/$(BOARD)-firmware.elf + @echo CREATE $@ + @$(OBJCOPY) -O ihex $^ $@ + +# We set vpath to point to the top of the tree so that the source files +# can be located. By following this scheme, it allows a single build rule +# to be used to compile all .c files. +vpath %.c . $(TOP) +$(BUILD)/obj/%.o: %.c + @echo CC $(notdir $@) + @$(CC) $(CFLAGS) -c -MD -o $@ $< + @# The following fixes the dependency file. + @# See http://make.paulandlesley.org/autodep.html for details. + @# Regex adjusted from the above to play better with Windows paths, etc. + @$(CP) $(@:.o=.d) $(@:.o=.P); \ + $(SED) -e 's/#.*//' -e 's/^.*: *//' -e 's/ *\\$$//' \ + -e '/^$$/ d' -e 's/$$/ :/' < $(@:.o=.d) >> $(@:.o=.P); \ + $(RM) $(@:.o=.d) + +# ASM sources lower case .s +vpath %.s . $(TOP) +$(BUILD)/obj/%.o: %.s + @echo AS $(notdir $@) + @$(CC) -x assembler-with-cpp $(ASFLAGS) -c -o $@ $< + +# ASM sources upper case .S +vpath %.S . $(TOP) +$(BUILD)/obj/%.o: %.S + @echo AS $(notdir $@) + @$(CC) -x assembler-with-cpp $(ASFLAGS) -c -o $@ $< + +size: $(BUILD)/$(BOARD)-firmware.elf + -@echo '' + @$(SIZE) $< + -@echo '' + +clean: + rm -rf build-$(BOARD) + +# Flash binary using Jlink +ifeq ($(OS),Windows_NT) + JLINKEXE = JLink.exe +else + JLINKEXE = JLinkExe +endif + +# Flash using jlink +flash-jlink: $(BUILD)/$(BOARD)-firmware.hex + @echo halt > $(BUILD)/$(BOARD).jlink + @echo loadfile $^ >> $(BUILD)/$(BOARD).jlink + @echo r >> $(BUILD)/$(BOARD).jlink + @echo go >> $(BUILD)/$(BOARD).jlink + @echo exit >> $(BUILD)/$(BOARD).jlink + $(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -speed auto -CommandFile $(BUILD)/$(BOARD).jlink |