diff options
Diffstat (limited to 'examples')
174 files changed, 2771 insertions, 836 deletions
diff --git a/examples/device/audio_4_channel_mic/.skip.MCU_SAMD11 b/examples/device/audio_4_channel_mic/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/audio_4_channel_mic/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/audio_4_channel_mic/.skip.MCU_SAME5X b/examples/device/audio_4_channel_mic/.skip.MCU_SAME5X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/audio_4_channel_mic/.skip.MCU_SAME5X +++ /dev/null diff --git a/examples/device/audio_4_channel_mic/.skip.MCU_SAMG b/examples/device/audio_4_channel_mic/.skip.MCU_SAMG deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/audio_4_channel_mic/.skip.MCU_SAMG +++ /dev/null diff --git a/examples/device/audio_4_channel_mic/skip.txt b/examples/device/audio_4_channel_mic/skip.txt new file mode 100644 index 000000000..ae9b57f1f --- /dev/null +++ b/examples/device/audio_4_channel_mic/skip.txt @@ -0,0 +1,3 @@ +mcu:SAMD11 +mcu:SAME5X +mcu:SAMG
\ No newline at end of file diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index d085dd43a..a6af5fd19 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -81,7 +81,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); // Init values sampFreq = AUDIO_SAMPLE_RATE; @@ -220,7 +221,7 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * // Request uses format layout 2 TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); - volume[channelNum] = ((audio_control_cur_2_t*) pBuff)->bCur; + volume[channelNum] = (uint16_t) ((audio_control_cur_2_t*) pBuff)->bCur; TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index 44be5a0d7..5cf6d07c3 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -30,6 +30,20 @@ extern "C" { #endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + //-------------------------------------------------------------------- // COMMON CONFIGURATION //-------------------------------------------------------------------- @@ -39,22 +53,19 @@ extern "C" { #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX -#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) -#else -#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE -#endif - #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif #ifndef CFG_TUSB_DEBUG -#define CFG_TUSB_DEBUG 0 +#define CFG_TUSB_DEBUG 0 #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -68,7 +79,7 @@ extern "C" { #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- @@ -80,11 +91,11 @@ extern "C" { #endif //------------- CLASS -------------// +#define CFG_TUD_AUDIO 1 #define CFG_TUD_CDC 0 #define CFG_TUD_MSC 0 #define CFG_TUD_HID 0 #define CFG_TUD_MIDI 0 -#define CFG_TUD_AUDIO 1 #define CFG_TUD_VENDOR 0 //-------------------------------------------------------------------- @@ -93,23 +104,23 @@ extern "C" { // Have a look into audio_device.h for all configurations -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_FOUR_CH_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_FOUR_CH_DESC_LEN -#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 1 -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 +#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 1 +#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 -#define CFG_TUD_AUDIO_ENABLE_EP_IN 1 -#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup -#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup -#define CFG_TUD_AUDIO_EP_SZ_IN (48 + 1) * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX // 48 Samples (48 kHz) x 2 Bytes/Sample x CFG_TUD_AUDIO_N_CHANNELS_TX Channels - the Windows driver always needs an extra sample per channel of space more, otherwise it complains... found by trial and error -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ CFG_TUD_AUDIO_EP_SZ_IN +#define CFG_TUD_AUDIO_ENABLE_EP_IN 1 +#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup +#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup +#define CFG_TUD_AUDIO_EP_SZ_IN (48 + 1) * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX // 48 Samples (48 kHz) x 2 Bytes/Sample x CFG_TUD_AUDIO_N_CHANNELS_TX Channels - the Windows driver always needs an extra sample per channel of space more, otherwise it complains... found by trial and error +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ CFG_TUD_AUDIO_EP_SZ_IN -#define CFG_TUD_AUDIO_ENABLE_ENCODING 1 -#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING 1 -#define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX 2 // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value -#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX) -#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO) +#define CFG_TUD_AUDIO_ENABLE_ENCODING 1 +#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING 1 +#define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX 2 // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value +#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX) +#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO) #ifdef __cplusplus } diff --git a/examples/device/audio_4_channel_mic/src/usb_descriptors.c b/examples/device/audio_4_channel_mic/src/usb_descriptors.c index 93ae2ea47..8929f3057 100644 --- a/examples/device/audio_4_channel_mic/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic/src/usb_descriptors.c @@ -149,7 +149,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; for(uint8_t i=0; i<chr_count; i++) @@ -159,7 +159,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/audio_test/.skip.MCU_SAMD11 b/examples/device/audio_test/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/audio_test/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/audio_test/.skip.MCU_SAME5X b/examples/device/audio_test/.skip.MCU_SAME5X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/audio_test/.skip.MCU_SAME5X +++ /dev/null diff --git a/examples/device/audio_test/.skip.MCU_SAMG b/examples/device/audio_test/.skip.MCU_SAMG deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/audio_test/.skip.MCU_SAMG +++ /dev/null diff --git a/examples/device/audio_test/skip.txt b/examples/device/audio_test/skip.txt new file mode 100644 index 000000000..ae9b57f1f --- /dev/null +++ b/examples/device/audio_test/skip.txt @@ -0,0 +1,3 @@ +mcu:SAMD11 +mcu:SAME5X +mcu:SAMG
\ No newline at end of file diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index ed13ce993..d0849c7ac 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -82,7 +82,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); // Init values sampFreq = AUDIO_SAMPLE_RATE; @@ -221,7 +222,7 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * // Request uses format layout 2 TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); - volume[channelNum] = ((audio_control_cur_2_t*) pBuff)->bCur; + volume[channelNum] = (uint16_t) ((audio_control_cur_2_t*) pBuff)->bCur; TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; diff --git a/examples/device/audio_test/src/tusb_config.h b/examples/device/audio_test/src/tusb_config.h index 683a1a567..355ed1011 100644 --- a/examples/device/audio_test/src/tusb_config.h +++ b/examples/device/audio_test/src/tusb_config.h @@ -30,6 +30,20 @@ extern "C" { #endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + //-------------------------------------------------------------------- // COMMON CONFIGURATION //-------------------------------------------------------------------- @@ -39,12 +53,6 @@ extern "C" { #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX -#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) -#else -#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE -#endif - #ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE #endif @@ -53,6 +61,12 @@ extern "C" { #define CFG_TUSB_DEBUG 0 #endif +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED + // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 @@ -80,11 +94,11 @@ extern "C" { #endif //------------- CLASS -------------// +#define CFG_TUD_AUDIO 1 #define CFG_TUD_CDC 0 #define CFG_TUD_MSC 0 #define CFG_TUD_HID 0 #define CFG_TUD_MIDI 0 -#define CFG_TUD_AUDIO 1 #define CFG_TUD_VENDOR 0 //-------------------------------------------------------------------- diff --git a/examples/device/audio_test/src/usb_descriptors.c b/examples/device/audio_test/src/usb_descriptors.c index 09b2a2d45..da3e203d7 100644 --- a/examples/device/audio_test/src/usb_descriptors.c +++ b/examples/device/audio_test/src/usb_descriptors.c @@ -149,7 +149,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; for(uint8_t i=0; i<chr_count; i++) @@ -159,7 +159,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/board_test/src/tusb_config.h b/examples/device/board_test/src/tusb_config.h index da33729e7..5aea4fd2c 100644 --- a/examples/device/board_test/src/tusb_config.h +++ b/examples/device/board_test/src/tusb_config.h @@ -43,7 +43,9 @@ #define CFG_TUSB_OS OPT_OS_NONE #endif -#define CFG_TUSB_RHPORT0_MODE OPT_MODE_NONE +// This example only test LED & GPIO, disable both device and host stack +#define CFG_TUD_ENABLED 0 +#define CFG_TUH_ENABLED 0 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 @@ -63,21 +65,6 @@ #define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif -//-------------------------------------------------------------------- -// DEVICE CONFIGURATION -//-------------------------------------------------------------------- - -#ifndef CFG_TUD_ENDPOINT0_SIZE -#define CFG_TUD_ENDPOINT0_SIZE 64 -#endif - -//------------- CLASS -------------// -#define CFG_TUD_CDC 0 -#define CFG_TUD_MSC 0 -#define CFG_TUD_HID 0 -#define CFG_TUD_MIDI 0 -#define CFG_TUD_VENDOR 0 - #ifdef __cplusplus } #endif diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index 34cd29edd..0264f0566 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -39,7 +39,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { @@ -54,17 +55,19 @@ int main(void) // with Serial0 as all lower case, Serial1 as all upper case static void echo_serial_port(uint8_t itf, uint8_t buf[], uint32_t count) { + uint8_t const case_diff = 'a' - 'A'; + for(uint32_t i=0; i<count; i++) { if (itf == 0) { // echo back 1st port as lower case - if (isupper(buf[i])) buf[i] += 'a' - 'A'; + if (isupper(buf[i])) buf[i] += case_diff; } else { // echo back 2nd port as upper case - if (islower(buf[i])) buf[i] -= 'a' - 'A'; + if (islower(buf[i])) buf[i] -= case_diff; } tud_cdc_n_write_char(itf, buf[i]); diff --git a/examples/device/cdc_dual_ports/src/tusb_config.h b/examples/device/cdc_dual_ports/src/tusb_config.h index ff8535d1a..070f08ed1 100644 --- a/examples/device/cdc_dual_ports/src/tusb_config.h +++ b/examples/device/cdc_dual_ports/src/tusb_config.h @@ -30,46 +30,42 @@ extern "C" { #endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + //-------------------------------------------------------------------- // COMMON CONFIGURATION //-------------------------------------------------------------------- // defined by board.mk #ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined +#error CFG_TUSB_MCU must be defined #endif -// RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 -#endif - -// RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 #endif -#ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE -#endif +// Enable Device stack +#define CFG_TUD_ENABLED 1 -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index aa400d486..cda1b63b6 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -236,7 +236,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -247,7 +247,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/cdc_msc/.skip.MCU_SAMD11 b/examples/device/cdc_msc/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/cdc_msc/skip.txt b/examples/device/cdc_msc/skip.txt new file mode 100644 index 000000000..d844feae8 --- /dev/null +++ b/examples/device/cdc_msc/skip.txt @@ -0,0 +1 @@ +mcu:SAMD11
\ No newline at end of file diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index 131ae6549..c3666763b 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -54,7 +54,9 @@ void cdc_task(void); int main(void) { board_init(); - tusb_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index 134bda392..e67e381ce 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -142,6 +142,7 @@ bool tud_msc_test_unit_ready_cb(uint8_t lun) // RAM disk is ready until ejected if (ejected) { + // Additional Sense 3A-00 is NOT_FOUND tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3a, 0x00); return false; } @@ -242,11 +243,6 @@ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, switch (scsi_cmd[0]) { - case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: - // Host is about to read/write etc ... better not to disconnect disk - resplen = 0; - break; - default: // Set Sense = Invalid Command Operation tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h index 499966cb4..03e0e649c 100644 --- a/examples/device/cdc_msc/src/tusb_config.h +++ b/examples/device/cdc_msc/src/tusb_config.h @@ -30,47 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\ - TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// Common Configuration +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif -// This example doesn't use an RTOS #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -84,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c index 40f75d6f6..6b59ed50f 100644 --- a/examples/device/cdc_msc/src/usb_descriptors.c +++ b/examples/device/cdc_msc/src/usb_descriptors.c @@ -117,6 +117,16 @@ enum #define EPNUM_MSC_OUT 0x05 #define EPNUM_MSC_IN 0x84 +#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X + // FT9XX doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x83 + + #define EPNUM_MSC_OUT 0x04 + #define EPNUM_MSC_IN 0x85 + #else #define EPNUM_CDC_NOTIF 0x81 #define EPNUM_CDC_OUT 0x02 @@ -272,7 +282,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_BCM2711 b/examples/device/cdc_msc_freertos/.skip.MCU_BCM2711 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_BCM2711 +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_CXD56 b/examples/device/cdc_msc_freertos/.skip.MCU_CXD56 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_CXD56 +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103 b/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_GD32VF103 +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX b/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_MKL25ZXX +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx b/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_MSP430x5xx +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 b/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_RP2040 +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11 b/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X b/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI b/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/cdc_msc_freertos/.skip.MCU_VALENTYUSB_EPTRI +++ /dev/null diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index a155d6cb7..3352dd37d 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -30,7 +30,7 @@ SRC_C += \ $(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c)) # Suppress FreeRTOS warnings -CFLAGS += -Wno-error=cast-qual +CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls # FreeRTOS (lto + Os) linker issue LDFLAGS += -Wl,--undefined=vTaskSwitchContext diff --git a/examples/device/cdc_msc_freertos/skip.txt b/examples/device/cdc_msc_freertos/skip.txt new file mode 100644 index 000000000..1ee51a9d4 --- /dev/null +++ b/examples/device/cdc_msc_freertos/skip.txt @@ -0,0 +1,11 @@ +mcu:CXD56 +mcu:F1C100S +mcu:GD32VF103 +mcu:MKL25ZXX +mcu:MSP430x5xx +mcu:RP2040 +mcu:SAMD11 +mcu:SAMX7X +mcu:VALENTYUSB_EPTRI +family:broadcom_32bit +family:broadcom_64bit
\ No newline at end of file diff --git a/examples/device/cdc_msc_freertos/src/CMakeLists.txt b/examples/device/cdc_msc_freertos/src/CMakeLists.txt index 93ae0686a..9216e2b49 100644 --- a/examples/device/cdc_msc_freertos/src/CMakeLists.txt +++ b/examples/device/cdc_msc_freertos/src/CMakeLists.txt @@ -13,6 +13,10 @@ target_include_directories(${COMPONENT_TARGET} PUBLIC "${TOP}/src" ) +target_compile_definitions(${COMPONENT_TARGET} PUBLIC + ESP_PLATFORM +) + target_sources(${COMPONENT_TARGET} PUBLIC "${TOP}/src/tusb.c" "${TOP}/src/common/tusb_fifo.c" diff --git a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index ccb620720..6a3630dbc 100644 --- a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -53,6 +53,7 @@ #if CFG_TUSB_MCU == OPT_MCU_MM32F327X extern u32 SystemCoreClock; #else + // FIXME cause redundant-decls warnings extern uint32_t SystemCoreClock; #endif diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index 2d3426f1d..755220c13 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -38,12 +38,17 @@ #include "freertos/queue.h" #include "freertos/task.h" #include "freertos/timers.h" + + #define USBD_STACK_SIZE 4096 #else #include "FreeRTOS.h" #include "semphr.h" #include "queue.h" #include "task.h" #include "timers.h" + + // Increase stack size when debug log is enabled + #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) #endif //--------------------------------------------------------------------+ @@ -65,14 +70,7 @@ enum { StaticTimer_t blinky_tmdef; TimerHandle_t blinky_tm; -// static task for usbd -// Increase stack size when debug log is enabled -#if CFG_TUSB_DEBUG - #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE) -#else - #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) -#endif - +// static task StackType_t usb_device_stack[USBD_STACK_SIZE]; StaticTask_t usb_device_taskdef; @@ -125,15 +123,19 @@ void usb_device_task(void* param) { (void) param; + // init device stack on configured roothub port // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. - tusb_init(); + tud_init(BOARD_TUD_RHPORT); // RTOS forever loop while (1) { - // tinyusb device task + // put this thread to waiting state until there is new events tud_task(); + + // following code only run if tud_task() process at least 1 event + tud_cdc_write_flush(); } } @@ -183,7 +185,7 @@ void cdc_task(void* params) // if ( tud_cdc_connected() ) { // There are data available - if ( tud_cdc_available() ) + while ( tud_cdc_available() ) { uint8_t buf[64]; @@ -196,12 +198,13 @@ void cdc_task(void* params) // for throughput test e.g // $ dd if=/dev/zero of=/dev/ttyACM0 count=10000 tud_cdc_write(buf, count); - tud_cdc_write_flush(); } + + tud_cdc_write_flush(); } - // For ESP32-S2 this delay is essential to allow idle how to run and reset wdt - vTaskDelay(pdMS_TO_TICKS(10)); + // For ESP32-Sx this delay is essential to allow idle how to run and reset watchdog + vTaskDelay(1); } } diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index b9205f0c2..a895f4738 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -221,11 +221,6 @@ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, switch (scsi_cmd[0]) { - case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: - // Host is about to read/write etc ... better not to disconnect disk - resplen = 0; - break; - default: // Set Sense = Invalid Command Operation tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index 55e84c62d..0ec8896b9 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -30,53 +30,48 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif // This examples use FreeRTOS -#define CFG_TUSB_OS OPT_OS_FREERTOS +#define CFG_TUSB_OS OPT_OS_FREERTOS // Espressif IDF requires "freertos/" prefix in include path #if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) - #define CFG_TUSB_OS_INC_PATH freertos/ +#define CFG_TUSB_OS_INC_PATH freertos/ #endif // can be defined by compiler in DEBUG build #ifndef CFG_TUSB_DEBUG - #define CFG_TUSB_DEBUG 0 +#define CFG_TUSB_DEBUG 0 #endif +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED + /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -89,7 +84,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- @@ -97,7 +92,7 @@ //-------------------------------------------------------------------- #ifndef CFG_TUD_ENDPOINT0_SIZE -#define CFG_TUD_ENDPOINT0_SIZE 64 +#define CFG_TUD_ENDPOINT0_SIZE 64 #endif //------------- CLASS -------------// diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c index 9585822a3..30a712275 100644 --- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c +++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -247,7 +247,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -258,7 +258,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/dfu/.skip.MCU_TM4C123 b/examples/device/dfu/.skip.MCU_TM4C123 deleted file mode 100644 index 6260e6e25..000000000 --- a/examples/device/dfu/.skip.MCU_TM4C123 +++ /dev/null @@ -1,4 +0,0 @@ -LINK _build/ek-tm4c123gxl/dfu.elf -/home/runner/cache/toolchain/xpack-arm-none-eabi-gcc-10.2.1-1.1/bin/../lib/gcc/arm-none-eabi/10.2.1/../../../../arm-none-eabi/bin/ld: section .ARM.exidx.text._close LMA [0000000000002980,0000000000002987] overlaps section .data LMA [0000000000002980,0000000000002a03] -collect2: error: ld returned 1 exit status -make: *** [../../rules.mk:94: _build/ek-tm4c123gxl/dfu.elf] Error 1
\ No newline at end of file diff --git a/examples/device/dfu/CMakeLists.txt b/examples/device/dfu/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/dfu/CMakeLists.txt +++ b/examples/device/dfu/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT})
\ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/dfu/skip.txt b/examples/device/dfu/skip.txt new file mode 100644 index 000000000..9ac346bad --- /dev/null +++ b/examples/device/dfu/skip.txt @@ -0,0 +1,2 @@ +mcu:TM4C123 +mcu:BCM2835 diff --git a/examples/device/dfu/src/main.c b/examples/device/dfu/src/main.c index 5c8464526..6bb183819 100644 --- a/examples/device/dfu/src/main.c +++ b/examples/device/dfu/src/main.c @@ -74,7 +74,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/dfu/src/tusb_config.h b/examples/device/dfu/src/tusb_config.h index 012d50019..38064147c 100644 --- a/examples/device/dfu/src/tusb_config.h +++ b/examples/device/dfu/src/tusb_config.h @@ -12,46 +12,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -65,7 +61,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- @@ -77,10 +73,10 @@ #endif //------------- CLASS -------------// -#define CFG_TUD_DFU 1 +#define CFG_TUD_DFU 1 // DFU buffer size, it has to be set to the buffer size used in TUD_DFU_DESCRIPTOR -#define CFG_TUD_DFU_XFER_BUFSIZE ( OPT_MODE_HIGH_SPEED ? 512 : 64 ) +#define CFG_TUD_DFU_XFER_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #ifdef __cplusplus } diff --git a/examples/device/dfu/src/usb_descriptors.c b/examples/device/dfu/src/usb_descriptors.c index 350334aa5..51a0d09f5 100644 --- a/examples/device/dfu/src/usb_descriptors.c +++ b/examples/device/dfu/src/usb_descriptors.c @@ -152,7 +152,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) { chr_count = 31; } diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c index 823c71ae5..55b380353 100644 --- a/examples/device/dfu_runtime/src/main.c +++ b/examples/device/dfu_runtime/src/main.c @@ -69,7 +69,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/dfu_runtime/src/tusb_config.h b/examples/device/dfu_runtime/src/tusb_config.h index bdae1d2e9..fa1ae6ed3 100644 --- a/examples/device/dfu_runtime/src/tusb_config.h +++ b/examples/device/dfu_runtime/src/tusb_config.h @@ -12,46 +12,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put diff --git a/examples/device/dfu_runtime/src/usb_descriptors.c b/examples/device/dfu_runtime/src/usb_descriptors.c index 060943289..1b0a60551 100644 --- a/examples/device/dfu_runtime/src/usb_descriptors.c +++ b/examples/device/dfu_runtime/src/usb_descriptors.c @@ -147,7 +147,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) { chr_count = 31; } @@ -160,7 +160,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (uint16_t)((((uint16_t)TUSB_DESC_STRING) << 8 ) | (2u*chr_count + 2u)); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/dynamic_configuration/.skip.MCU_SAMD11 b/examples/device/dynamic_configuration/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/dynamic_configuration/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/dynamic_configuration/skip.txt b/examples/device/dynamic_configuration/skip.txt new file mode 100644 index 000000000..d844feae8 --- /dev/null +++ b/examples/device/dynamic_configuration/skip.txt @@ -0,0 +1 @@ +mcu:SAMD11
\ No newline at end of file diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index 4c10f55b0..33a603343 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -55,7 +55,9 @@ void midi_task(void); int main(void) { board_init(); - tusb_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { @@ -179,7 +181,7 @@ void midi_task(void) start_ms += 286; // Previous positions in the note sequence. - int previous = note_pos - 1; + int previous = (int) (note_pos - 1); // If we currently are at position 0, set the // previous position to the last note in the sequence. diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index b9205f0c2..e8cb03fdd 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -184,7 +184,7 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buff uint8_t const* addr = msc_disk[lba] + offset; memcpy(buffer, addr, bufsize); - return bufsize; + return (int32_t) bufsize; } // Callback invoked when received WRITE10 command. @@ -203,7 +203,7 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* (void) lba; (void) offset; (void) buffer; #endif - return bufsize; + return (int32_t) bufsize; } // Callback invoked when received an SCSI command not in built-in list below @@ -221,11 +221,6 @@ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, switch (scsi_cmd[0]) { - case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: - // Host is about to read/write etc ... better not to disconnect disk - resplen = 0; - break; - default: // Set Sense = Invalid Command Operation tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); @@ -242,7 +237,7 @@ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, { if(in_xfer) { - memcpy(buffer, response, resplen); + memcpy(buffer, response, (size_t) resplen); }else { // SCSI output diff --git a/examples/device/dynamic_configuration/src/tusb_config.h b/examples/device/dynamic_configuration/src/tusb_config.h index 23073faf3..b9b3878cc 100644 --- a/examples/device/dynamic_configuration/src/tusb_config.h +++ b/examples/device/dynamic_configuration/src/tusb_config.h @@ -30,46 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -83,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index 3352972a5..457f774d0 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -163,7 +163,7 @@ uint8_t const desc_configuration_0[] = TUD_CONFIG_DESCRIPTOR(1, ITF_0_NUM_TOTAL, 0, CONFIG_0_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_0_NUM_CDC, 0, EPNUM_0_CDC_NOTIF, 8, EPNUM_0_CDC_OUT, EPNUM_0_CDC_IN, 64), + TUD_CDC_DESCRIPTOR(ITF_0_NUM_CDC, 0, EPNUM_0_CDC_NOTIF, 8, EPNUM_0_CDC_OUT, EPNUM_0_CDC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), // Interface number, string index, EP Out & EP In address, EP size TUD_MIDI_DESCRIPTOR(ITF_0_NUM_MIDI, 0, EPNUM_0_MIDI_OUT, EPNUM_0_MIDI_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), @@ -226,7 +226,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -237,7 +237,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index e5e2f6856..71afa3f46 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -55,7 +55,9 @@ void hid_task(void); int main(void) { board_init(); - tusb_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { @@ -179,7 +181,7 @@ void tud_hid_set_protocol_cb(uint8_t instance, uint8_t protocol) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len) +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, /*uint16_t*/ uint8_t len) { (void) instance; (void) report; diff --git a/examples/device/hid_boot_interface/src/tusb_config.h b/examples/device/hid_boot_interface/src/tusb_config.h index 59fb9962c..52723e09f 100644 --- a/examples/device/hid_boot_interface/src/tusb_config.h +++ b/examples/device/hid_boot_interface/src/tusb_config.h @@ -30,46 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -83,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/hid_boot_interface/src/usb_descriptors.c b/examples/device/hid_boot_interface/src/usb_descriptors.c index 3fa48d98d..a0d7e9f15 100644 --- a/examples/device/hid_boot_interface/src/usb_descriptors.c +++ b/examples/device/hid_boot_interface/src/usb_descriptors.c @@ -163,7 +163,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -174,7 +174,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index fd25e620a..f7d76cfc7 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -56,7 +56,9 @@ void hid_task(void); int main(void) { board_init(); - tusb_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { @@ -223,12 +225,12 @@ void hid_task(void) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len) +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, /*uint16_t*/ uint8_t len) { (void) instance; (void) len; - uint8_t next_report_id = report[0] + 1; + uint8_t next_report_id = report[0] + 1u; if (next_report_id < REPORT_ID_COUNT) { diff --git a/examples/device/hid_composite/src/tusb_config.h b/examples/device/hid_composite/src/tusb_config.h index 8fa5e5cd4..6bd32c427 100644 --- a/examples/device/hid_composite/src/tusb_config.h +++ b/examples/device/hid_composite/src/tusb_config.h @@ -30,46 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\ - TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put diff --git a/examples/device/hid_composite/src/usb_descriptors.c b/examples/device/hid_composite/src/usb_descriptors.c index e760b20ba..2988baee2 100644 --- a/examples/device/hid_composite/src/usb_descriptors.c +++ b/examples/device/hid_composite/src/usb_descriptors.c @@ -210,7 +210,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -221,7 +221,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_composite_freertos/.skip.MCU_BCM2711 b/examples/device/hid_composite_freertos/.skip.MCU_BCM2711 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/hid_composite_freertos/.skip.MCU_BCM2711 +++ /dev/null diff --git a/examples/device/hid_composite_freertos/.skip.MCU_CXD56 b/examples/device/hid_composite_freertos/.skip.MCU_CXD56 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/hid_composite_freertos/.skip.MCU_CXD56 +++ /dev/null diff --git a/examples/device/hid_composite_freertos/.skip.MCU_GD32VF103 b/examples/device/hid_composite_freertos/.skip.MCU_GD32VF103 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/hid_composite_freertos/.skip.MCU_GD32VF103 +++ /dev/null diff --git a/examples/device/hid_composite_freertos/.skip.MCU_MSP430x5xx b/examples/device/hid_composite_freertos/.skip.MCU_MSP430x5xx deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/hid_composite_freertos/.skip.MCU_MSP430x5xx +++ /dev/null diff --git a/examples/device/hid_composite_freertos/.skip.MCU_RP2040 b/examples/device/hid_composite_freertos/.skip.MCU_RP2040 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/hid_composite_freertos/.skip.MCU_RP2040 +++ /dev/null diff --git a/examples/device/hid_composite_freertos/.skip.MCU_SAMD11 b/examples/device/hid_composite_freertos/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/hid_composite_freertos/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/hid_composite_freertos/.skip.MCU_SAMX7X b/examples/device/hid_composite_freertos/.skip.MCU_SAMX7X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/hid_composite_freertos/.skip.MCU_SAMX7X +++ /dev/null diff --git a/examples/device/hid_composite_freertos/.skip.MCU_VALENTYUSB_EPTRI b/examples/device/hid_composite_freertos/.skip.MCU_VALENTYUSB_EPTRI deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/hid_composite_freertos/.skip.MCU_VALENTYUSB_EPTRI +++ /dev/null diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile index c9b7abdf5..6c8c43ddd 100644 --- a/examples/device/hid_composite_freertos/Makefile +++ b/examples/device/hid_composite_freertos/Makefile @@ -29,7 +29,7 @@ SRC_C += \ $(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c)) # Suppress FreeRTOS warnings -CFLAGS += -Wno-error=cast-qual +CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls # FreeRTOS (lto + Os) linker issue LDFLAGS += -Wl,--undefined=vTaskSwitchContext diff --git a/examples/device/hid_composite_freertos/skip.txt b/examples/device/hid_composite_freertos/skip.txt new file mode 100644 index 000000000..1ee51a9d4 --- /dev/null +++ b/examples/device/hid_composite_freertos/skip.txt @@ -0,0 +1,11 @@ +mcu:CXD56 +mcu:F1C100S +mcu:GD32VF103 +mcu:MKL25ZXX +mcu:MSP430x5xx +mcu:RP2040 +mcu:SAMD11 +mcu:SAMX7X +mcu:VALENTYUSB_EPTRI +family:broadcom_32bit +family:broadcom_64bit
\ No newline at end of file diff --git a/examples/device/hid_composite_freertos/src/CMakeLists.txt b/examples/device/hid_composite_freertos/src/CMakeLists.txt index 6f156379f..25da8fcd7 100644 --- a/examples/device/hid_composite_freertos/src/CMakeLists.txt +++ b/examples/device/hid_composite_freertos/src/CMakeLists.txt @@ -13,6 +13,10 @@ target_include_directories(${COMPONENT_TARGET} PUBLIC "${TOP}/src" ) +target_compile_definitions(${COMPONENT_TARGET} PUBLIC + ESP_PLATFORM +) + target_sources(${COMPONENT_TARGET} PUBLIC "${TOP}/src/tusb.c" "${TOP}/src/common/tusb_fifo.c" @@ -27,5 +31,5 @@ target_sources(${COMPONENT_TARGET} PUBLIC "${TOP}/src/class/net/ncm_device.c" "${TOP}/src/class/usbtmc/usbtmc_device.c" "${TOP}/src/class/vendor/vendor_device.c" - "${TOP}/src/portable/espressif/esp32sx/dcd_esp32sx.c" + "${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c" ) diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index 336f5d426..b67c10937 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -39,12 +39,18 @@ #include "freertos/queue.h" #include "freertos/task.h" #include "freertos/timers.h" + + #define USBD_STACK_SIZE 4096 + #else #include "FreeRTOS.h" #include "semphr.h" #include "queue.h" #include "task.h" #include "timers.h" + + // Increase stack size when debug log is enabled + #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) #endif //--------------------------------------------------------------------+ @@ -66,13 +72,7 @@ enum { StaticTimer_t blinky_tmdef; TimerHandle_t blinky_tm; -// static task for usbd -#if CFG_TUSB_DEBUG - #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE) -#else - #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) -#endif - +// static task StackType_t usb_device_stack[USBD_STACK_SIZE]; StaticTask_t usb_device_taskdef; @@ -125,15 +125,18 @@ void usb_device_task(void* param) { (void) param; + // init device stack on configured roothub port // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. - tusb_init(); + tud_init(BOARD_TUD_RHPORT); // RTOS forever loop while (1) { - // tinyusb device task + // put this thread to waiting state until there is new events tud_task(); + + // following code only run if tud_task() process at least 1 event } } @@ -291,7 +294,7 @@ void hid_task(void* param) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len) +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, /*uint16_t*/ uint8_t len) { (void) instance; (void) len; diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h index 062f32ac3..935ae9453 100644 --- a/examples/device/hid_composite_freertos/src/tusb_config.h +++ b/examples/device/hid_composite_freertos/src/tusb_config.h @@ -30,53 +30,48 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif // This examples use FreeRTOS -#define CFG_TUSB_OS OPT_OS_FREERTOS +#define CFG_TUSB_OS OPT_OS_FREERTOS // Espressif IDF requires "freertos/" prefix in include path #if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) - #define CFG_TUSB_OS_INC_PATH freertos/ +#define CFG_TUSB_OS_INC_PATH freertos/ #endif - +// can be defined by compiler in DEBUG build #ifndef CFG_TUSB_DEBUG -#define CFG_TUSB_DEBUG 0 +#define CFG_TUSB_DEBUG 0 #endif +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED + /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. diff --git a/examples/device/hid_composite_freertos/src/usb_descriptors.c b/examples/device/hid_composite_freertos/src/usb_descriptors.c index 791813fdf..4df12d3db 100644 --- a/examples/device/hid_composite_freertos/src/usb_descriptors.c +++ b/examples/device/hid_composite_freertos/src/usb_descriptors.c @@ -208,7 +208,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -219,7 +219,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_generic_inout/hid_test.py b/examples/device/hid_generic_inout/hid_test.py index a42930fb5..21fd3f421 100644 --- a/examples/device/hid_generic_inout/hid_test.py +++ b/examples/device/hid_generic_inout/hid_test.py @@ -1,20 +1,22 @@ # Install python3 HID package https://pypi.org/project/hid/ import hid -USB_VID = 0xcafe +# default is TinyUSB (0xcafe), Adafruit (0x239a), RaspberryPi (0x2e8a), Espressif (0x303a) VID +USB_VID = (0xcafe, 0x239a, 0x2e8a, 0x303a) -print("Openning HID device with VID = 0x%X" % USB_VID) +print("VID list: " + ", ".join('%02x' % v for v in USB_VID)) -for dict in hid.enumerate(USB_VID): - print(dict) - dev = hid.Device(dict['vendor_id'], dict['product_id']) - if dev: - while True: - # Get input from console and encode to UTF8 for array of chars. - # hid generic inout is single report therefore by HIDAPI requirement - # it must be preceeded with 0x00 as dummy reportID - str_out = b'\x00' - str_out += input("Send text to HID Device : ").encode('utf-8') - dev.write(str_out) - str_in = dev.read(64) - print("Received from HID Device:", str_in, '\n') +for vid in USB_VID: + for dict in hid.enumerate(vid): + print(dict) + dev = hid.Device(dict['vendor_id'], dict['product_id']) + if dev: + while True: + # Get input from console and encode to UTF8 for array of chars. + # hid generic inout is single report therefore by HIDAPI requirement + # it must be preceeded with 0x00 as dummy reportID + str_out = b'\x00' + str_out += input("Send text to HID Device : ").encode('utf-8') + dev.write(str_out) + str_in = dev.read(64) + print("Received from HID Device:", str_in, '\n') diff --git a/examples/device/hid_generic_inout/src/main.c b/examples/device/hid_generic_inout/src/main.c index 32185560e..5b7daf118 100644 --- a/examples/device/hid_generic_inout/src/main.c +++ b/examples/device/hid_generic_inout/src/main.c @@ -80,7 +80,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/hid_generic_inout/src/tusb_config.h b/examples/device/hid_generic_inout/src/tusb_config.h index 1b8b91c41..98143ac4d 100644 --- a/examples/device/hid_generic_inout/src/tusb_config.h +++ b/examples/device/hid_generic_inout/src/tusb_config.h @@ -30,46 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -83,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/hid_generic_inout/src/usb_descriptors.c b/examples/device/hid_generic_inout/src/usb_descriptors.c index 5dabf42a3..c2b4792c8 100644 --- a/examples/device/hid_generic_inout/src/usb_descriptors.c +++ b/examples/device/hid_generic_inout/src/usb_descriptors.c @@ -153,7 +153,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -164,7 +164,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_multiple_interface/src/main.c b/examples/device/hid_multiple_interface/src/main.c index 7cb1d75a7..29ba74398 100644 --- a/examples/device/hid_multiple_interface/src/main.c +++ b/examples/device/hid_multiple_interface/src/main.c @@ -60,7 +60,9 @@ void hid_task(void); int main(void) { board_init(); - tusb_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/hid_multiple_interface/src/tusb_config.h b/examples/device/hid_multiple_interface/src/tusb_config.h index a0aa17a90..49dc962fe 100644 --- a/examples/device/hid_multiple_interface/src/tusb_config.h +++ b/examples/device/hid_multiple_interface/src/tusb_config.h @@ -30,46 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put diff --git a/examples/device/hid_multiple_interface/src/usb_descriptors.c b/examples/device/hid_multiple_interface/src/usb_descriptors.c index 9eef21504..42471a961 100644 --- a/examples/device/hid_multiple_interface/src/usb_descriptors.c +++ b/examples/device/hid_multiple_interface/src/usb_descriptors.c @@ -171,7 +171,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -182,7 +182,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/midi_test/src/main.c b/examples/device/midi_test/src/main.c index 193748477..3310348bd 100644 --- a/examples/device/midi_test/src/main.c +++ b/examples/device/midi_test/src/main.c @@ -62,7 +62,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { @@ -139,7 +140,7 @@ void midi_task(void) start_ms += 286; // Previous positions in the note sequence. - int previous = note_pos - 1; + int previous = (int) (note_pos - 1); // If we currently are at position 0, set the // previous position to the last note in the sequence. diff --git a/examples/device/midi_test/src/tusb_config.h b/examples/device/midi_test/src/tusb_config.h index 61b9b6552..314dde438 100644 --- a/examples/device/midi_test/src/tusb_config.h +++ b/examples/device/midi_test/src/tusb_config.h @@ -30,46 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -83,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/midi_test/src/usb_descriptors.c b/examples/device/midi_test/src/usb_descriptors.c index bd5a0eeab..c84a873b1 100644 --- a/examples/device/midi_test/src/usb_descriptors.c +++ b/examples/device/midi_test/src/usb_descriptors.c @@ -83,9 +83,15 @@ enum #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... - #define EPNUM_MIDI 0x02 + #define EPNUM_MIDI_OUT 0x02 + #define EPNUM_MIDI_IN 0x02 +#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X + // On Bridgetek FT9xx endpoint numbers must be unique... + #define EPNUM_MIDI_OUT 0x02 + #define EPNUM_MIDI_IN 0x03 #else - #define EPNUM_MIDI 0x01 + #define EPNUM_MIDI_OUT 0x01 + #define EPNUM_MIDI_IN 0x01 #endif uint8_t const desc_fs_configuration[] = @@ -94,7 +100,7 @@ uint8_t const desc_fs_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, 64) + TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI_OUT, (0x80 | EPNUM_MIDI_IN), 64) }; #if TUD_OPT_HIGH_SPEED @@ -104,7 +110,7 @@ uint8_t const desc_hs_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, 512) + TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI_OUT, (0x80 | EPNUM_MIDI_IN), 512) }; #endif @@ -160,7 +166,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -171,7 +177,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/msc_dual_lun/.skip.MCU_MKL25ZXX b/examples/device/msc_dual_lun/.skip.MCU_MKL25ZXX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/msc_dual_lun/.skip.MCU_MKL25ZXX +++ /dev/null diff --git a/examples/device/msc_dual_lun/.skip.MCU_SAMD11 b/examples/device/msc_dual_lun/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/msc_dual_lun/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/msc_dual_lun/skip.txt b/examples/device/msc_dual_lun/skip.txt new file mode 100644 index 000000000..3549c702a --- /dev/null +++ b/examples/device/msc_dual_lun/skip.txt @@ -0,0 +1,2 @@ +mcu:SAMD11 +mcu:MKL25ZXX
\ No newline at end of file diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index 0293261ad..96790d20c 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -54,7 +54,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/msc_dual_lun/src/msc_disk_dual.c b/examples/device/msc_dual_lun/src/msc_disk_dual.c index 18d3ca0d7..2b773b43b 100644 --- a/examples/device/msc_dual_lun/src/msc_disk_dual.c +++ b/examples/device/msc_dual_lun/src/msc_disk_dual.c @@ -28,6 +28,9 @@ #if CFG_TUD_MSC +// When button is pressed, LUN1 will be set to not ready to simulate +// medium not present (e.g SD card removed) + // Some MCU doesn't have enough 8KB SRAM to store the whole disk // We will use Flash as read-only disk with board that has // CFG_EXAMPLE_MSC_READONLY defined @@ -227,7 +230,7 @@ void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16 // return true allowing host to read/write this LUN e.g SD card inserted bool tud_msc_test_unit_ready_cb(uint8_t lun) { - (void) lun; + if ( lun == 1 && board_button_read() ) return false; return true; // RAM disk is always ready } @@ -274,7 +277,7 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buff uint8_t const* addr = (lun ? msc_disk1[lba] : msc_disk0[lba]) + offset; memcpy(buffer, addr, bufsize); - return bufsize; + return (int32_t) bufsize; } bool tud_msc_is_writable_cb (uint8_t lun) @@ -302,7 +305,7 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* (void) lun; (void) lba; (void) offset; (void) buffer; #endif - return bufsize; + return (int32_t) bufsize; } // Callback invoked when received an SCSI command not in built-in list below @@ -320,23 +323,6 @@ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, switch (scsi_cmd[0]) { - case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: - // Host is about to read/write etc ... better not to disconnect disk - resplen = 0; - break; - - case SCSI_CMD_START_STOP_UNIT: - // Host try to eject/safe remove/poweroff us. We could safely disconnect with disk storage, or go into lower power - /* scsi_start_stop_unit_t const * start_stop = (scsi_start_stop_unit_t const *) scsi_cmd; - // Start bit = 0 : low power mode, if load_eject = 1 : unmount disk storage as well - // Start bit = 1 : Ready mode, if load_eject = 1 : mount disk storage - start_stop->start; - start_stop->load_eject; - */ - resplen = 0; - break; - - default: // Set Sense = Invalid Command Operation tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); @@ -353,7 +339,7 @@ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, { if(in_xfer) { - memcpy(buffer, response, resplen); + memcpy(buffer, response, (size_t) resplen); }else { // SCSI output diff --git a/examples/device/msc_dual_lun/src/tusb_config.h b/examples/device/msc_dual_lun/src/tusb_config.h index 44da21e54..9cbbbade9 100644 --- a/examples/device/msc_dual_lun/src/tusb_config.h +++ b/examples/device/msc_dual_lun/src/tusb_config.h @@ -30,46 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -83,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/msc_dual_lun/src/usb_descriptors.c b/examples/device/msc_dual_lun/src/usb_descriptors.c index 2afd391af..68a671c91 100644 --- a/examples/device/msc_dual_lun/src/usb_descriptors.c +++ b/examples/device/msc_dual_lun/src/usb_descriptors.c @@ -168,7 +168,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -179,7 +179,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/net_lwip_webserver/.skip.MCU_BCM2711 b/examples/device/net_lwip_webserver/.skip.MCU_BCM2711 deleted file mode 100644 index bdc68f5db..000000000 --- a/examples/device/net_lwip_webserver/.skip.MCU_BCM2711 +++ /dev/null @@ -1 +0,0 @@ -tinyusb/lib/lwip/src/include/lwip/arch.h:202:13: error: conflicting types for 'ssize_t'
\ No newline at end of file diff --git a/examples/device/net_lwip_webserver/.skip.MCU_LPC11UXX b/examples/device/net_lwip_webserver/.skip.MCU_LPC11UXX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/net_lwip_webserver/.skip.MCU_LPC11UXX +++ /dev/null diff --git a/examples/device/net_lwip_webserver/.skip.MCU_LPC13XX b/examples/device/net_lwip_webserver/.skip.MCU_LPC13XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/net_lwip_webserver/.skip.MCU_LPC13XX +++ /dev/null diff --git a/examples/device/net_lwip_webserver/.skip.MCU_MKL25ZXX b/examples/device/net_lwip_webserver/.skip.MCU_MKL25ZXX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/net_lwip_webserver/.skip.MCU_MKL25ZXX +++ /dev/null diff --git a/examples/device/net_lwip_webserver/.skip.MCU_MSP430x5xx b/examples/device/net_lwip_webserver/.skip.MCU_MSP430x5xx deleted file mode 100644 index 17600f062..000000000 --- a/examples/device/net_lwip_webserver/.skip.MCU_MSP430x5xx +++ /dev/null @@ -1 +0,0 @@ -too many warnings for 16-bit integer overflow diff --git a/examples/device/net_lwip_webserver/.skip.MCU_NUC121 b/examples/device/net_lwip_webserver/.skip.MCU_NUC121 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/net_lwip_webserver/.skip.MCU_NUC121 +++ /dev/null diff --git a/examples/device/net_lwip_webserver/.skip.MCU_SAMD11 b/examples/device/net_lwip_webserver/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/net_lwip_webserver/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/net_lwip_webserver/.skip.MCU_STM32L0 b/examples/device/net_lwip_webserver/.skip.MCU_STM32L0 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/net_lwip_webserver/.skip.MCU_STM32L0 +++ /dev/null diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt index 7500f6e9e..9fe1a325e 100644 --- a/examples/device/net_lwip_webserver/CMakeLists.txt +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -69,11 +69,13 @@ if (EXISTS ${TOP}/lib/lwip/src) ${TOP}/lib/networking/rndis_reports.c ) - target_compile_definitions(${PROJECT} PUBLIC - PBUF_POOL_SIZE=2 - TCP_WND=2*TCP_MSS - HTTPD_USE_CUSTOM_FSDATA=0 - ) + # due to warnings from other net source, we need to prevent error from some of the warnings options + target_compile_options(${PROJECT} PUBLIC + -Wno-error=null-dereference + -Wno-error=conversion + -Wno-error=sign-conversion + -Wno-error=sign-compare + ) # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt new file mode 100644 index 000000000..68761b058 --- /dev/null +++ b/examples/device/net_lwip_webserver/skip.txt @@ -0,0 +1,10 @@ +mcu:LPC11UXX +mcu:LPC13XX +mcu:MSP430x5xx +mcu:NUC121 +mcu:SAMD11 +mcu:STM32L0 +mcu:MKL25ZXX +family:broadcom_64bit +family:broadcom_32bit +board:curiosity_nano
\ No newline at end of file diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c index 30bb3577b..33b4d38b6 100644 --- a/examples/device/net_lwip_webserver/src/main.c +++ b/examples/device/net_lwip_webserver/src/main.c @@ -228,7 +228,9 @@ int main(void) { /* initialize TinyUSB */ board_init(); - tusb_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); /* initialize lwip, dhcp-server, dns-server, and http */ init_lwip(); diff --git a/examples/device/net_lwip_webserver/src/tusb_config.h b/examples/device/net_lwip_webserver/src/tusb_config.h index 114961cb7..fe72ecdfe 100644 --- a/examples/device/net_lwip_webserver/src/tusb_config.h +++ b/examples/device/net_lwip_webserver/src/tusb_config.h @@ -30,46 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// Common Configuration +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -83,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index 2b4b2a0c3..bee51790a 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -231,7 +231,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > (TU_ARRAY_SIZE(_desc_str) - 1)) chr_count = TU_ARRAY_SIZE(_desc_str) - 1; // Convert ASCII string into UTF-16 @@ -242,7 +242,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/uac2_headset/.skip.MCU_LPC11UXX b/examples/device/uac2_headset/.skip.MCU_LPC11UXX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/uac2_headset/.skip.MCU_LPC11UXX +++ /dev/null diff --git a/examples/device/uac2_headset/.skip.MCU_LPC13XX b/examples/device/uac2_headset/.skip.MCU_LPC13XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/uac2_headset/.skip.MCU_LPC13XX +++ /dev/null diff --git a/examples/device/uac2_headset/.skip.MCU_NUC121 b/examples/device/uac2_headset/.skip.MCU_NUC121 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/uac2_headset/.skip.MCU_NUC121 +++ /dev/null diff --git a/examples/device/uac2_headset/.skip.MCU_SAMD11 b/examples/device/uac2_headset/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/uac2_headset/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/uac2_headset/.skip.MCU_SAME5X b/examples/device/uac2_headset/.skip.MCU_SAME5X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/uac2_headset/.skip.MCU_SAME5X +++ /dev/null diff --git a/examples/device/uac2_headset/.skip.MCU_SAMG b/examples/device/uac2_headset/.skip.MCU_SAMG deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/uac2_headset/.skip.MCU_SAMG +++ /dev/null diff --git a/examples/device/uac2_headset/skip.txt b/examples/device/uac2_headset/skip.txt new file mode 100644 index 000000000..70d8e8838 --- /dev/null +++ b/examples/device/uac2_headset/skip.txt @@ -0,0 +1,7 @@ +mcu:LPC11UXX +mcu:LPC13XX +mcu:NUC121 +mcu:SAMD11 +mcu:SAME5X +mcu:SAMG +board:stm32l052dap52 diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 67e287d3e..003dc2a74 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -102,7 +102,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); TU_LOG1("Headset running\r\n"); @@ -156,9 +157,9 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t { if (request->bRequest == AUDIO_CS_REQ_CUR) { - TU_LOG1("Clock get current freq %u\r\n", current_sample_rate); + TU_LOG1("Clock get current freq %lu\r\n", current_sample_rate); - audio_control_cur_4_t curf = { tu_htole32(current_sample_rate) }; + audio_control_cur_4_t curf = { (int32_t) tu_htole32(current_sample_rate) }; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &curf, sizeof(curf)); } else if (request->bRequest == AUDIO_CS_REQ_RANGE) @@ -170,8 +171,8 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t TU_LOG1("Clock get %d freq ranges\r\n", N_SAMPLE_RATES); for(uint8_t i = 0; i < N_SAMPLE_RATES; i++) { - rangef.subrange[i].bMin = sample_rates[i]; - rangef.subrange[i].bMax = sample_rates[i]; + rangef.subrange[i].bMin = (int32_t) sample_rates[i]; + rangef.subrange[i].bMax = (int32_t) sample_rates[i]; rangef.subrange[i].bRes = 0; TU_LOG1("Range %d (%d, %d, %d)\r\n", i, (int)rangef.subrange[i].bMin, (int)rangef.subrange[i].bMax, (int)rangef.subrange[i].bRes); } @@ -203,9 +204,9 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t { TU_VERIFY(request->wLength == sizeof(audio_control_cur_4_t)); - current_sample_rate = ((audio_control_cur_4_t const *)buf)->bCur; + current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *)buf)->bCur; - TU_LOG1("Clock set current freq: %d\r\n", current_sample_rate); + TU_LOG1("Clock set current freq: %ld\r\n", current_sample_rate); return true; } @@ -402,9 +403,9 @@ void audio_task(void) // Combine two channels into one int32_t left = *src++; int32_t right = *src++; - *dst++ = (left >> 1) + (right >> 1); + *dst++ = (int16_t) ((left >> 1) + (right >> 1)); } - tud_audio_write((uint8_t *)mic_buf, spk_data_size / 2); + tud_audio_write((uint8_t *)mic_buf, (uint16_t) (spk_data_size / 2)); spk_data_size = 0; } else if (current_resolution == 24) @@ -417,9 +418,9 @@ void audio_task(void) // Combine two channels into one int32_t left = *src++; int32_t right = *src++; - *dst++ = ((left >> 1) + (right >> 1)) & 0xffffff00; + *dst++ = (int32_t) ((uint32_t) ((left >> 1) + (right >> 1)) & 0xffffff00ul); } - tud_audio_write((uint8_t *)mic_buf, spk_data_size / 2); + tud_audio_write((uint8_t *)mic_buf, (uint16_t) (spk_data_size / 2)); spk_data_size = 0; } } diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h index e8d93f56a..1a3e23e95 100644 --- a/examples/device/uac2_headset/src/tusb_config.h +++ b/examples/device/uac2_headset/src/tusb_config.h @@ -31,34 +31,45 @@ extern "C" { #endif +#include "usb_descriptors.h" + +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- -#include "usb_descriptors.h" - // defined by compiler flags for flexibility #ifndef CFG_TUSB_MCU #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX -#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) -#else -#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE -#endif - #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif #ifndef CFG_TUSB_DEBUG -// Can be set during compilation i.e.: make LOG=<value for CFG_TUSB_DEBUG> BOARD=<bsp> -// Keep in mind that enabling logs when data is streaming can disrupt data flow. -// It can be very helpful though when audio unit requests are tested/debugged. -#define CFG_TUSB_DEBUG 0 +#define CFG_TUSB_DEBUG 0 #endif +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED + /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -71,7 +82,7 @@ extern "C" { #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index 9e97845b8..10f5cbd27 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -155,7 +155,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if (chr_count > 31) chr_count = 31; for (uint8_t i = 0; i < chr_count; i++) @@ -165,7 +165,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2 * chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h index d9510ea4f..342b4fac1 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.h +++ b/examples/device/uac2_headset/src/usb_descriptors.h @@ -86,7 +86,7 @@ enum #define TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(_stridx, _epout, _epin) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitfs*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ ITF_NUM_TOTAL, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_IAD(/*_firstitfs*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ 3, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ diff --git a/examples/device/usbtmc/skip.txt b/examples/device/usbtmc/skip.txt new file mode 100644 index 000000000..a43106cf0 --- /dev/null +++ b/examples/device/usbtmc/skip.txt @@ -0,0 +1 @@ +mcu:BCM2835 diff --git a/examples/device/usbtmc/src/main.c b/examples/device/usbtmc/src/main.c index 1fce48f45..6945d8743 100644 --- a/examples/device/usbtmc/src/main.c +++ b/examples/device/usbtmc/src/main.c @@ -54,7 +54,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/usbtmc/src/tusb_config.h b/examples/device/usbtmc/src/tusb_config.h index a192d0dbc..ab486b108 100644 --- a/examples/device/usbtmc/src/tusb_config.h +++ b/examples/device/usbtmc/src/tusb_config.h @@ -12,46 +12,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// Common Configuration +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -65,7 +61,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/usbtmc/src/usb_descriptors.c b/examples/device/usbtmc/src/usb_descriptors.c index 423482634..ff682ff97 100644 --- a/examples/device/usbtmc/src/usb_descriptors.c +++ b/examples/device/usbtmc/src/usb_descriptors.c @@ -37,6 +37,9 @@ #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define USB_VID 0xCafe +#define USB_BCD 0x0200 + //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ @@ -51,9 +54,9 @@ tusb_desc_device_t const desc_device = .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - .idVendor = 0xCafe, + .idVendor = USB_VID, .idProduct = USB_PID, - .bcdDevice = 0x0100, + .bcdDevice = USB_BCD, .iManufacturer = 0x01, .iProduct = 0x02, @@ -75,22 +78,22 @@ uint8_t const * tud_descriptor_device_cb(void) #if defined(CFG_TUD_USBTMC) -# define TUD_USBTMC_DESC_MAIN(_itfnum,_bNumEndpoints) \ +# define TUD_USBTMC_DESC_MAIN(_itfnum,_bNumEndpoints, _bulkMaxPacketLength) \ TUD_USBTMC_IF_DESCRIPTOR(_itfnum, _bNumEndpoints, /*_stridx = */ 4u, TUD_USBTMC_PROTOCOL_USB488), \ - TUD_USBTMC_BULK_DESCRIPTORS(/* OUT = */0x01, /* IN = */ 0x81, /* packet size = */USBTMCD_MAX_PACKET_SIZE) + TUD_USBTMC_BULK_DESCRIPTORS(/* OUT = */0x01, /* IN = */ 0x81, /* packet size = */_bulkMaxPacketLength) #if CFG_TUD_USBTMC_ENABLE_INT_EP // USBTMC Interrupt xfer always has length of 2, but we use epMaxSize=8 for // compatibility with mcus that only allow 8, 16, 32 or 64 for FS endpoints -# define TUD_USBTMC_DESC(_itfnum) \ - TUD_USBTMC_DESC_MAIN(_itfnum, /* _epCount = */ 3), \ +# define TUD_USBTMC_DESC(_itfnum, _bulkMaxPacketLength) \ + TUD_USBTMC_DESC_MAIN(_itfnum, /* _epCount = */ 3, _bulkMaxPacketLength), \ TUD_USBTMC_INT_DESCRIPTOR(/* INT ep # */ 0x82, /* epMaxSize = */ 8, /* bInterval = */16u ) # define TUD_USBTMC_DESC_LEN (TUD_USBTMC_IF_DESCRIPTOR_LEN + TUD_USBTMC_BULK_DESCRIPTORS_LEN + TUD_USBTMC_INT_DESCRIPTOR_LEN) #else -# define TUD_USBTMC_DESC(_itfnum) \ - TUD_USBTMC_DESC_MAIN(_itfnum, /* _epCount = */ 2u) +# define TUD_USBTMC_DESC(_itfnum, _bulkMaxPacketLength) \ + TUD_USBTMC_DESC_MAIN(_itfnum, /* _epCount = */ 2u, _bulkMaxPacketLength) # define TUD_USBTMC_DESC_LEN (TUD_USBTMC_IF_DESCRIPTOR_LEN + TUD_USBTMC_BULK_DESCRIPTORS_LEN) #endif /* CFG_TUD_USBTMC_ENABLE_INT_EP */ @@ -119,21 +122,66 @@ enum #endif -uint8_t const desc_configuration[] = +uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), - TUD_USBTMC_DESC(ITF_NUM_USBTMC), + TUD_USBTMC_DESC(ITF_NUM_USBTMC, /* _bulkMaxPacketLength = */ 64), }; +#if TUD_OPT_HIGH_SPEED + +uint8_t const desc_hs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + + TUD_USBTMC_DESC(ITF_NUM_USBTMC, /* _bulkMaxPacketLength = */ 512), +}; + +// other speed configuration +uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; + +// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed +tusb_desc_device_qualifier_t const desc_device_qualifier = +{ + .bLength = sizeof(tusb_desc_device_qualifier_t), + .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, + .bcdUSB = USB_BCD, + + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bNumConfigurations = 0x01, + .bReserved = 0x00 +}; + +// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. +// device_qualifier descriptor describes information about a high-speed capable device that would +// change if the device were operating at the other speed. If not highspeed capable stall this request. +uint8_t const* tud_descriptor_device_qualifier_cb(void) +{ + return (uint8_t const*) &desc_device_qualifier; +} + +#endif + // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { (void) index; // for multiple configurations - return desc_configuration; +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif } //--------------------------------------------------------------------+ @@ -175,7 +223,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) { chr_count = 31; } diff --git a/examples/device/usbtmc/visaQuery.py b/examples/device/usbtmc/visaQuery.py index 50a765a03..c4e5ad2b9 100644 --- a/examples/device/usbtmc/visaQuery.py +++ b/examples/device/usbtmc/visaQuery.py @@ -1,6 +1,6 @@ #!/usr/bin/env python3 -import visa +import pyvisa import time import sys @@ -54,9 +54,9 @@ def test_srq(): assert (inst.read_stb() == 0) inst.write("123") - #inst.enable_event(visa.constants.VI_EVENT_SERVICE_REQ, visa.constants.VI_QUEUE) - #waitrsp = inst.wait_on_event(visa.constants.VI_EVENT_SERVICE_REQ, 5000) - #inst.discard_events(visa.constants.VI_EVENT_SERVICE_REQ, visa.constants.VI_QUEUE) + #inst.enable_event(pyvisa.constants.VI_EVENT_SERVICE_REQ, pyvisa.constants.VI_QUEUE) + #waitrsp = inst.wait_on_event(pyvisa.constants.VI_EVENT_SERVICE_REQ, 5000) + #inst.discard_events(pyvisa.constants.VI_EVENT_SERVICE_REQ, pyvisa.constants.VI_QUEUE) #inst.wait_for_srq() time.sleep(0.3) stb = inst.read_stb() @@ -77,8 +77,8 @@ def test_read_timeout(): t0 = time.monotonic() try: rsp = inst.read() - assert(false), "Read should have resulted in timeout" - except visa.VisaIOError: + assert(False), "Read should have resulted in timeout" + except pyvisa.VisaIOError: print(" Got expected exception") t = time.monotonic() - t0 assert ((t*1000.0) > (inst.timeout - 300)) @@ -99,23 +99,27 @@ def test_abort_in(): t0 = time.monotonic() try: rsp = inst.read() - assert(false), "Read should have resulted in timeout" - except visa.VisaIOError: + assert(False), "Read should have resulted in timeout" + except pyvisa.VisaIOError: print(" Got expected exception") t = time.monotonic() - t0 assert ((t*1000.0) > (inst.timeout - 300)) assert ((t*1000.0) < (inst.timeout + 300)) print(f" Delay was {t:0.3}") - # Response is still in queue, so send a clear (to be more helpful to the next test) + # Response is still in queue, so read it out (to be more helpful to the next test) inst.timeout = 800 y = inst.read() assert(y == "xxx\r\n") def test_indicate(): # perform indicator pulse - usb_iface = inst.get_visa_attribute(visa.constants.VI_ATTR_USB_INTFC_NUM) + usb_iface = inst.get_visa_attribute(pyvisa.constants.VI_ATTR_USB_INTFC_NUM) retv = inst.control_in(request_type_bitmap_field=0xA1, request_id=64, request_value=0x0000, index=usb_iface, length=0x0001) - assert((retv[1] == visa.constants.StatusCode(0)) and (retv[0] == b'\x01')), f"indicator pulse failed: retv={retv}" + # pyvisa used to return (statuscode,bytes), but now only returns bytes, so we need to handle both cases + if(isinstance(retv,bytes)): + assert(retv == b'\x01') + else: + assert((retv[1] == pyvisa.constants.StatusCode(0)) and (retv[0] == b'\x01')), f"indicator pulse failed: retv={retv}" def test_multi_read(): @@ -131,19 +135,19 @@ def test_multi_read(): #inst.chunk_size = old_chunk_size def test_stall_ep0(): - usb_iface = inst.get_visa_attribute(visa.constants.VI_ATTR_USB_INTFC_NUM) + usb_iface = inst.get_visa_attribute(pyvisa.constants.VI_ATTR_USB_INTFC_NUM) inst.read_stb() # This is an invalid request, should create stall. try: retv = inst.control_in(request_type_bitmap_field=0xA1, request_id=60, request_value=0x0000, index=usb_iface, length=0x0001) - assert false - except visa.VisaIOError: + assert(False) + except pyvisa.VisaIOError: pass assert (inst.read_stb() == 0) -rm = visa.ResourceManager() +rm = pyvisa.ResourceManager() reslist = rm.list_resources("USB?::?*::INSTR") print(reslist) @@ -167,7 +171,6 @@ inst.timeout = 2000 print("+ multi read") test_multi_read() - print("+ echo delay=0") inst.write("delay 0") test_echo(1,175) diff --git a/examples/device/video_capture/.skip.MCU_MSP430x5xx b/examples/device/video_capture/.skip.MCU_MSP430x5xx deleted file mode 100644 index 17600f062..000000000 --- a/examples/device/video_capture/.skip.MCU_MSP430x5xx +++ /dev/null @@ -1 +0,0 @@ -too many warnings for 16-bit integer overflow diff --git a/examples/device/video_capture/.skip.MCU_SAMD11 b/examples/device/video_capture/.skip.MCU_SAMD11 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/device/video_capture/.skip.MCU_SAMD11 +++ /dev/null diff --git a/examples/device/video_capture/CMakeLists.txt b/examples/device/video_capture/CMakeLists.txt index cb321f9a8..b92a2b804 100644 --- a/examples/device/video_capture/CMakeLists.txt +++ b/examples/device/video_capture/CMakeLists.txt @@ -12,6 +12,12 @@ family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) add_executable(${PROJECT}) +if (FORCE_READONLY) +target_compile_definitions(${PROJECT} PRIVATE + CFG_EXAMPLE_VIDEO_READONLY +) +endif() + # Example source target_sources(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c diff --git a/examples/device/video_capture/Makefile b/examples/device/video_capture/Makefile index 69b633fea..fda66bcc1 100644 --- a/examples/device/video_capture/Makefile +++ b/examples/device/video_capture/Makefile @@ -1,6 +1,13 @@ include ../../../tools/top.mk include ../../make.mk +ifeq ($(DISABLE_MJPEG),1) +CFLAGS += -DCFG_EXAMPLE_VIDEO_DISABLE_MJPEG +endif +ifeq ($(FORCE_READONLY),1) +CFLAGS += -DCFG_EXAMPLE_VIDEO_READONLY +endif + INC += \ src \ $(TOP)/hw \ diff --git a/examples/device/video_capture/skip.txt b/examples/device/video_capture/skip.txt new file mode 100644 index 000000000..5898664a2 --- /dev/null +++ b/examples/device/video_capture/skip.txt @@ -0,0 +1,3 @@ +mcu:MSP430x5xx +mcu:NUC121 +mcu:SAMD11 diff --git a/examples/device/video_capture/src/images.h b/examples/device/video_capture/src/images.h index 1b13cfe81..0398428b3 100644 --- a/examples/device/video_capture/src/images.h +++ b/examples/device/video_capture/src/images.h @@ -1,3 +1,4 @@ +#if defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPG) static const unsigned char frame_buffer[128 * (96 + 1) * 2] = { /* 0 */ 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, @@ -1649,3 +1650,287 @@ static const unsigned char frame_buffer[128 * (96 + 1) * 2] = { 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, }; +#else + +#define color_bar_0_jpg_len 511 +#define color_bar_1_jpg_len 512 +#define color_bar_2_jpg_len 511 +#define color_bar_3_jpg_len 511 +#define color_bar_4_jpg_len 511 +#define color_bar_5_jpg_len 512 +#define color_bar_6_jpg_len 511 +#define color_bar_7_jpg_len 511 + +unsigned char color_bar_0_jpg[] = { + 0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11, + 0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, + 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x92, 0x8a, 0x00, + 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, + 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, + 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, + 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, + 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, + 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, + 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, + 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, + 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, + 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, + 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, + 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, + 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, + 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, + 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, + 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, + 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, + 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, + 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, + 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, + 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0xff, 0xd9 +}; +unsigned char color_bar_1_jpg[] = { + 0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11, + 0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, + 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x7d, 0x15, 0x98, + 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, + 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, + 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, + 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, + 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, + 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, + 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, + 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, + 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, + 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, + 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, + 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, + 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, + 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, + 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, + 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, + 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, + 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, + 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, + 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, + 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x7f, 0xff, 0xd9 +}; +unsigned char color_bar_2_jpg[] = { + 0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11, + 0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, + 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x75, 0x14, 0xcc, + 0xc4, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, + 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, + 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, + 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, + 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, + 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, + 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, + 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, + 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, + 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, + 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, + 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, + 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, + 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, + 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, + 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, + 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, + 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, + 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, + 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, + 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x33, 0xff, 0xd9 +}; +unsigned char color_bar_3_jpg[] = { + 0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11, + 0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, + 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x5a, 0x2a, 0x08, + 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, + 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, + 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, + 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, + 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, + 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, + 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, + 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, + 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, + 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, + 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, + 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, + 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, + 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, + 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, + 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, + 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, + 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, + 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, + 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, + 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x91, 0xff, 0xd9 +}; +unsigned char color_bar_4_jpg[] = { + 0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11, + 0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, + 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x4a, 0x2a, 0xcb, + 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, + 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, + 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, + 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, + 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, + 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, + 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, + 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, + 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, + 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, + 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, + 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, + 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, + 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, + 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, + 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, + 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, + 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, + 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, + 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, + 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x9f, 0xff, 0xd9 +}; +unsigned char color_bar_5_jpg[] = { + 0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11, + 0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, + 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x6d, 0x14, 0x8d, + 0x04, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, + 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, + 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, + 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, + 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, + 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, + 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, + 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, + 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, + 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, + 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, + 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, + 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, + 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, + 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, + 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, + 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, + 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, + 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, + 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, + 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x7f, 0xff, 0xd9 +}; +unsigned char color_bar_6_jpg[] = { + 0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11, + 0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, + 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x65, 0x15, 0xa0, + 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, + 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, + 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, + 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, + 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, + 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, + 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, + 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, + 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, + 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, + 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, + 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, + 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, + 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, + 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, + 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, + 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, + 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, + 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, + 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, + 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x33, 0xff, 0xd9 +}; +unsigned char color_bar_7_jpg[] = { + 0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11, + 0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, + 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x8e, 0x8a, 0x00, + 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, + 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, + 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, + 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, + 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, + 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, + 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, + 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, + 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, + 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, + 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, + 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, + 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, + 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, + 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, + 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, + 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, + 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, + 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, + 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, + 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x47, 0xff, 0xd9 +}; +#endif diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index f1d48385f..3ceebe821 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -55,7 +55,9 @@ void video_task(void); int main(void) { board_init(); - tusb_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { @@ -110,6 +112,23 @@ static unsigned interval_ms = 1000 / FRAME_RATE; /* YUY2 frame buffer */ #ifdef CFG_EXAMPLE_VIDEO_READONLY #include "images.h" + +# if !defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPG) +static struct { + uint32_t size; + uint8_t const *buffer; +} const frames[] = { + {color_bar_0_jpg_len, color_bar_0_jpg}, + {color_bar_1_jpg_len, color_bar_1_jpg}, + {color_bar_2_jpg_len, color_bar_2_jpg}, + {color_bar_3_jpg_len, color_bar_3_jpg}, + {color_bar_4_jpg_len, color_bar_4_jpg}, + {color_bar_5_jpg_len, color_bar_5_jpg}, + {color_bar_6_jpg_len, color_bar_6_jpg}, + {color_bar_7_jpg_len, color_bar_7_jpg}, +}; +# endif + #else static uint8_t frame_buffer[FRAME_WIDTH * FRAME_HEIGHT * 16 / 8]; static void fill_color_bar(uint8_t *buffer, unsigned start_position) @@ -166,8 +185,12 @@ void video_task(void) already_sent = 1; start_ms = board_millis(); #ifdef CFG_EXAMPLE_VIDEO_READONLY - tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t) &frame_buffer[(frame_num % (FRAME_WIDTH / 2)) * 4], +# if defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPG) + tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)&frame_buffer[(frame_num % (FRAME_WIDTH / 2)) * 4], FRAME_WIDTH * FRAME_HEIGHT * 16/8); +# else + tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)frames[frame_num % 8].buffer, frames[frame_num % 8].size); +# endif #else fill_color_bar(frame_buffer, frame_num); tud_video_n_frame_xfer(0, 0, (void*)frame_buffer, FRAME_WIDTH * FRAME_HEIGHT * 16/8); @@ -180,8 +203,12 @@ void video_task(void) start_ms += interval_ms; #ifdef CFG_EXAMPLE_VIDEO_READONLY - tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t) &frame_buffer[(frame_num % (FRAME_WIDTH / 2)) * 4], +# if defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPG) + tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)&frame_buffer[(frame_num % (FRAME_WIDTH / 2)) * 4], FRAME_WIDTH * FRAME_HEIGHT * 16/8); +# else + tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)frames[frame_num % 8].buffer, frames[frame_num % 8].size); +# endif #else fill_color_bar(frame_buffer, frame_num); tud_video_n_frame_xfer(0, 0, (void*)frame_buffer, FRAME_WIDTH * FRAME_HEIGHT * 16/8); diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h index 4feb6a48a..e567ba669 100644 --- a/examples/device/video_capture/src/tusb_config.h +++ b/examples/device/video_capture/src/tusb_config.h @@ -30,42 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// Common Configuration +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif -// This example doesn't use an RTOS #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -79,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/video_capture/src/usb_descriptors.c b/examples/device/video_capture/src/usb_descriptors.c index da8ec8e89..499ee311c 100644 --- a/examples/device/video_capture/src/usb_descriptors.c +++ b/examples/device/video_capture/src/usb_descriptors.c @@ -75,7 +75,11 @@ uint8_t const * tud_descriptor_device_cb(void) // Configuration Descriptor //--------------------------------------------------------------------+ -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_VIDEO_CAPTURE_DESC_LEN) +#if defined(CFG_EXAMPLE_VIDEO_READONLY) && !defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPEG) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_VIDEO_CAPTURE_DESC_MJPEG_LEN) +#else +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_VIDEO_CAPTURE_DESC_UNCOMPR_LEN) +#endif #if TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX) // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number @@ -96,9 +100,15 @@ uint8_t const desc_fs_configuration[] = // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0, 500), // IAD for Video Control - TUD_VIDEO_CAPTURE_DESCRIPTOR(4, EPNUM_VIDEO_IN, - FRAME_WIDTH, FRAME_HEIGHT, FRAME_RATE, - CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE) +#if defined(CFG_EXAMPLE_VIDEO_READONLY) && !defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPEG) + TUD_VIDEO_CAPTURE_DESCRIPTOR_MJPEG(4, EPNUM_VIDEO_IN, + FRAME_WIDTH, FRAME_HEIGHT, FRAME_RATE, + CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE) +#else + TUD_VIDEO_CAPTURE_DESCRIPTOR_UNCOMPR(4, EPNUM_VIDEO_IN, + FRAME_WIDTH, FRAME_HEIGHT, FRAME_RATE, + CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE) +#endif }; // Invoked when received GET CONFIGURATION DESCRIPTOR @@ -149,7 +159,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -160,7 +170,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/video_capture/src/usb_descriptors.h b/examples/device/video_capture/src/usb_descriptors.h index eeaef6bd2..f1ed3c8e9 100644 --- a/examples/device/video_capture/src/usb_descriptors.h +++ b/examples/device/video_capture/src/usb_descriptors.h @@ -38,12 +38,12 @@ #define FRAME_RATE 10 enum { - ITF_NUM_VIDEO_CONTROL = 0, + ITF_NUM_VIDEO_CONTROL, ITF_NUM_VIDEO_STREAMING, ITF_NUM_TOTAL }; -#define TUD_VIDEO_CAPTURE_DESC_LEN (\ +#define TUD_VIDEO_CAPTURE_DESC_UNCOMPR_LEN (\ TUD_VIDEO_DESC_IAD_LEN\ /* control */\ + TUD_VIDEO_DESC_STD_VC_LEN\ @@ -61,6 +61,24 @@ enum { + 7/* Endpoint */\ ) +#define TUD_VIDEO_CAPTURE_DESC_MJPEG_LEN (\ + TUD_VIDEO_DESC_IAD_LEN\ + /* control */\ + + TUD_VIDEO_DESC_STD_VC_LEN\ + + (TUD_VIDEO_DESC_CS_VC_LEN + 1/*bInCollection*/)\ + + TUD_VIDEO_DESC_CAMERA_TERM_LEN\ + + TUD_VIDEO_DESC_OUTPUT_TERM_LEN\ + /* Interface 1, Alternate 0 */\ + + TUD_VIDEO_DESC_STD_VS_LEN\ + + (TUD_VIDEO_DESC_CS_VS_IN_LEN + 1/*bNumFormats x bControlSize*/)\ + + TUD_VIDEO_DESC_CS_VS_FMT_MJPEG_LEN\ + + TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_CONT_LEN\ + + TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING_LEN\ + /* Interface 1, Alternate 1 */\ + + TUD_VIDEO_DESC_STD_VS_LEN\ + + 7/* Endpoint */\ + ) + /* Windows support YUY2 and NV12 * https://docs.microsoft.com/en-us/windows-hardware/drivers/stream/usb-video-class-driver-overview */ @@ -73,20 +91,20 @@ enum { #define TUD_VIDEO_DESC_CS_VS_FMT_I420(_fmtidx, _numfmtdesc, _frmidx, _asrx, _asry, _interlace, _cp) \ TUD_VIDEO_DESC_CS_VS_FMT_UNCOMPR(_fmtidx, _numfmtdesc, TUD_VIDEO_GUID_I420, 12, _frmidx, _asrx, _asry, _interlace, _cp) -#define TUD_VIDEO_CAPTURE_DESCRIPTOR(_stridx, _epin, _width, _height, _fps, _epsize) \ - TUD_VIDEO_DESC_IAD(ITF_NUM_VIDEO_CONTROL, ITF_NUM_TOTAL, _stridx), \ +#define TUD_VIDEO_CAPTURE_DESCRIPTOR_UNCOMPR(_stridx, _epin, _width, _height, _fps, _epsize) \ + TUD_VIDEO_DESC_IAD(ITF_NUM_VIDEO_CONTROL, /* 2 Interfaces */ 0x02, _stridx), \ /* Video control 0 */ \ TUD_VIDEO_DESC_STD_VC(ITF_NUM_VIDEO_CONTROL, 0, _stridx), \ TUD_VIDEO_DESC_CS_VC( /* UVC 1.5*/ 0x0150, \ /* wTotalLength - bLength */ \ TUD_VIDEO_DESC_CAMERA_TERM_LEN + TUD_VIDEO_DESC_OUTPUT_TERM_LEN, \ - UVC_CLOCK_FREQUENCY, 1), \ + UVC_CLOCK_FREQUENCY, ITF_NUM_VIDEO_STREAMING), \ TUD_VIDEO_DESC_CAMERA_TERM(UVC_ENTITY_CAP_INPUT_TERMINAL, 0, 0,\ /*wObjectiveFocalLengthMin*/0, /*wObjectiveFocalLengthMax*/0,\ /*wObjectiveFocalLength*/0, /*bmControls*/0), \ TUD_VIDEO_DESC_OUTPUT_TERM(UVC_ENTITY_CAP_OUTPUT_TERMINAL, VIDEO_TT_STREAMING, 0, 1, 0), \ /* Video stream alt. 0 */ \ - TUD_VIDEO_DESC_STD_VS( 1, 0, 0, 0), \ + TUD_VIDEO_DESC_STD_VS(ITF_NUM_VIDEO_STREAMING, 0, 0, _stridx), \ /* Video stream header for without still image capture */ \ TUD_VIDEO_DESC_CS_VS_INPUT( /*bNumFormats*/1, \ /*wTotalLength - bLength */\ @@ -103,10 +121,47 @@ enum { TUD_VIDEO_DESC_CS_VS_FRM_UNCOMPR_CONT(/*bFrameIndex */1, 0, _width, _height, \ _width * _height * 16, _width * _height * 16 * _fps, \ _width * _height * 16, \ - (10000000/_fps), (10000000/_fps), 10000000, 100000), \ + (10000000/_fps), (10000000/_fps), (10000000/_fps)*_fps, (10000000/_fps)), \ + TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING(VIDEO_COLOR_PRIMARIES_BT709, VIDEO_COLOR_XFER_CH_BT709, VIDEO_COLOR_COEF_SMPTE170M), \ + /* VS alt 1 */\ + TUD_VIDEO_DESC_STD_VS(ITF_NUM_VIDEO_STREAMING, 1, 1, _stridx), \ + /* EP */ \ + TUD_VIDEO_DESC_EP_ISO(_epin, _epsize, 1) + +#define TUD_VIDEO_CAPTURE_DESCRIPTOR_MJPEG(_stridx, _epin, _width, _height, _fps, _epsize) \ + TUD_VIDEO_DESC_IAD(ITF_NUM_VIDEO_CONTROL, /* 2 Interfaces */ 0x02, _stridx), \ + /* Video control 0 */ \ + TUD_VIDEO_DESC_STD_VC(ITF_NUM_VIDEO_CONTROL, 0, _stridx), \ + TUD_VIDEO_DESC_CS_VC( /* UVC 1.5*/ 0x0150, \ + /* wTotalLength - bLength */ \ + TUD_VIDEO_DESC_CAMERA_TERM_LEN + TUD_VIDEO_DESC_OUTPUT_TERM_LEN, \ + UVC_CLOCK_FREQUENCY, ITF_NUM_VIDEO_STREAMING), \ + TUD_VIDEO_DESC_CAMERA_TERM(UVC_ENTITY_CAP_INPUT_TERMINAL, 0, 0,\ + /*wObjectiveFocalLengthMin*/0, /*wObjectiveFocalLengthMax*/0,\ + /*wObjectiveFocalLength*/0, /*bmControls*/0), \ + TUD_VIDEO_DESC_OUTPUT_TERM(UVC_ENTITY_CAP_OUTPUT_TERMINAL, VIDEO_TT_STREAMING, 0, 1, 0), \ + /* Video stream alt. 0 */ \ + TUD_VIDEO_DESC_STD_VS(ITF_NUM_VIDEO_STREAMING, 0, 0, _stridx), \ + /* Video stream header for without still image capture */ \ + TUD_VIDEO_DESC_CS_VS_INPUT( /*bNumFormats*/1, \ + /*wTotalLength - bLength */\ + TUD_VIDEO_DESC_CS_VS_FMT_MJPEG_LEN\ + + TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_CONT_LEN\ + + TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING_LEN,\ + _epin, /*bmInfo*/0, /*bTerminalLink*/UVC_ENTITY_CAP_OUTPUT_TERMINAL, \ + /*bStillCaptureMethod*/0, /*bTriggerSupport*/0, /*bTriggerUsage*/0, \ + /*bmaControls(1)*/0), \ + /* Video stream format */ \ + TUD_VIDEO_DESC_CS_VS_FMT_MJPEG(/*bFormatIndex*/1, /*bNumFrameDescriptors*/1, \ + /*bmFlags*/0, /*bDefaultFrameIndex*/1, 0, 0, 0, /*bCopyProtect*/0), \ + /* Video stream frame format */ \ + TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_CONT(/*bFrameIndex */1, 0, _width, _height, \ + _width * _height * 16, _width * _height * 16 * _fps, \ + _width * _height * 16 / 8, \ + (10000000/_fps), (10000000/_fps), (10000000/_fps)*_fps, (10000000/_fps)), \ TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING(VIDEO_COLOR_PRIMARIES_BT709, VIDEO_COLOR_XFER_CH_BT709, VIDEO_COLOR_COEF_SMPTE170M), \ /* VS alt 1 */\ - TUD_VIDEO_DESC_STD_VS(1, 1, 1, 0), \ + TUD_VIDEO_DESC_STD_VS(ITF_NUM_VIDEO_STREAMING, 1, 1, _stridx), \ /* EP */ \ TUD_VIDEO_DESC_EP_ISO(_epin, _epsize, 1) diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c index 2716825f8..604d30a83 100644 --- a/examples/device/webusb_serial/src/main.c +++ b/examples/device/webusb_serial/src/main.c @@ -71,7 +71,7 @@ enum { static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; -#define URL "example.tinyusb.org/webusb-serial/" +#define URL "example.tinyusb.org/webusb-serial/index.html" const tusb_desc_webusb_url_t desc_url = { @@ -93,7 +93,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { @@ -113,6 +114,7 @@ void echo_all(uint8_t buf[], uint32_t count) if ( web_serial_connected ) { tud_vendor_write(buf, count); + tud_vendor_flush(); } // echo to cdc @@ -210,7 +212,8 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ board_led_write(true); blink_interval_ms = BLINK_ALWAYS_ON; - tud_vendor_write_str("\r\nTinyUSB WebUSB device example\r\n"); + tud_vendor_write_str("\r\nWebUSB interface connected\r\n"); + tud_vendor_flush(); }else { blink_interval_ms = BLINK_MOUNTED; diff --git a/examples/device/webusb_serial/src/tusb_config.h b/examples/device/webusb_serial/src/tusb_config.h index 26b81b389..fde732b9e 100644 --- a/examples/device/webusb_serial/src/tusb_config.h +++ b/examples/device/webusb_serial/src/tusb_config.h @@ -30,46 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED - #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED - #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED - #endif +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// Common Configuration +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -83,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/webusb_serial/src/usb_descriptors.c b/examples/device/webusb_serial/src/usb_descriptors.c index 93e802a90..cafe2c22b 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.c +++ b/examples/device/webusb_serial/src/usb_descriptors.c @@ -235,7 +235,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -246,7 +246,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/dual/CMakeLists.txt b/examples/dual/CMakeLists.txt new file mode 100644 index 000000000..d2f9a42f0 --- /dev/null +++ b/examples/dual/CMakeLists.txt @@ -0,0 +1,12 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) + +project(tinyusb_dual_examples) +family_initialize_project(tinyusb_dual_examples ${CMAKE_CURRENT_LIST_DIR}) +if (FAMILY STREQUAL "rp2040" AND NOT TARGET tinyusb_pico_pio_usb) + message("Skipping dual host/device mode examples as Pico-PIO-USB is not available") +else() + # family_add_subdirectory will filter what to actually add based on selected FAMILY + family_add_subdirectory(host_hid_to_device_cdc) +endif() diff --git a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt new file mode 100644 index 000000000..fc9bbfc13 --- /dev/null +++ b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt @@ -0,0 +1,40 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_dual_usb_example(${PROJECT}) + +# due to warnings from other net source, we need to prevent error from some of the warnings options +target_compile_options(${PROJECT} PUBLIC + -Wno-error=shadow + -Wno-error=cast-align + -Wno-error=cast-qual + -Wno-error=redundant-decls + -Wno-error=sign-conversion + -Wno-error=conversion + -Wno-error=sign-compare + -Wno-error=unused-function + ) diff --git a/examples/dual/host_hid_to_device_cdc/Makefile b/examples/dual/host_hid_to_device_cdc/Makefile new file mode 100644 index 000000000..3fe9b0888 --- /dev/null +++ b/examples/dual/host_hid_to_device_cdc/Makefile @@ -0,0 +1,19 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +CFLAGS += -Wno-error=cast-align -Wno-error=null-dereference + +SRC_C += \ + src/class/hid/hid_host.c \ + src/host/hub.c \ + src/host/usbh.c + +include ../../rules.mk diff --git a/examples/dual/host_hid_to_device_cdc/only.txt b/examples/dual/host_hid_to_device_cdc/only.txt new file mode 100644 index 000000000..6ee8e3fde --- /dev/null +++ b/examples/dual/host_hid_to_device_cdc/only.txt @@ -0,0 +1,3 @@ +board:mimxrt1060_evk +board:mimxrt1064_evk +mcu:RP2040 diff --git a/examples/dual/host_hid_to_device_cdc/src/main.c b/examples/dual/host_hid_to_device_cdc/src/main.c new file mode 100644 index 000000000..bd7870274 --- /dev/null +++ b/examples/dual/host_hid_to_device_cdc/src/main.c @@ -0,0 +1,298 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +// This example runs both host and device concurrently. The USB host receive +// reports from HID device and print it out over USB Device CDC interface. + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +// uncomment if you are using colemak layout +// #define KEYBOARD_COLEMAK + +#ifdef KEYBOARD_COLEMAK +const uint8_t colemak[128] = { + 0 , 0, 0, 0, 0, 0, 0, 22, + 9 , 23, 7, 0, 24, 17, 8, 12, + 0 , 14, 28, 51, 0, 19, 21, 10, + 15 , 0, 0, 0, 13, 0, 0, 0, + 0 , 0, 0, 0, 0, 0, 0, 0, + 0 , 0, 0, 0, 0, 0, 0, 0, + 0 , 0, 0, 18, 0, 0, 0, 0, + 0 , 0, 0, 0, 0, 0, 0, 0, + 0 , 0, 0, 0, 0, 0, 0, 0, + 0 , 0, 0, 0, 0, 0, 0, 0 +}; +#endif + +static uint8_t const keycode2ascii[128][2] = { HID_KEYCODE_TO_ASCII }; + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +void led_blinking_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + printf("TinyUSB Host HID <-> Device CDC Example\r\n"); + + // init device and host stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); + tuh_init(BOARD_TUH_RHPORT); + + while (1) + { + tud_task(); // tinyusb device task + tuh_task(); // tinyusb host task + led_blinking_task(); + } + + return 0; +} + +//--------------------------------------------------------------------+ +// Device CDC +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when CDC interface received data from host +void tud_cdc_rx_cb(uint8_t itf) +{ + (void) itf; + + char buf[64]; + uint32_t count = tud_cdc_read(buf, sizeof(buf)); + + // TODO control LED on keyboard of host stack + (void) count; +} + +//--------------------------------------------------------------------+ +// Host HID +//--------------------------------------------------------------------+ + +// Invoked when device with hid interface is mounted +// Report descriptor is also available for use. tuh_hid_parse_report_descriptor() +// can be used to parse common/simple enough descriptor. +// Note: if report descriptor length > CFG_TUH_ENUMERATION_BUFSIZE, it will be skipped +// therefore report_desc = NULL, desc_len = 0 +void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_report, uint16_t desc_len) +{ + (void)desc_report; + (void)desc_len; + + // Interface protocol (hid_interface_protocol_enum_t) + const char* protocol_str[] = { "None", "Keyboard", "Mouse" }; + uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); + + uint16_t vid, pid; + tuh_vid_pid_get(dev_addr, &vid, &pid); + + char tempbuf[256]; + int count = sprintf(tempbuf, "[%04x:%04x][%u] HID Interface%u, Protocol = %s\r\n", vid, pid, dev_addr, instance, protocol_str[itf_protocol]); + + tud_cdc_write(tempbuf, (uint32_t) count); + tud_cdc_write_flush(); + + // Receive report from boot keyboard & mouse only + // tuh_hid_report_received_cb() will be invoked when report is available + if (itf_protocol == HID_ITF_PROTOCOL_KEYBOARD || itf_protocol == HID_ITF_PROTOCOL_MOUSE) + { + if ( !tuh_hid_receive_report(dev_addr, instance) ) + { + tud_cdc_write_str("Error: cannot request report\r\n"); + } + } +} + +// Invoked when device with hid interface is un-mounted +void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) +{ + char tempbuf[256]; + int count = sprintf(tempbuf, "[%u] HID Interface%u is unmounted\r\n", dev_addr, instance); + tud_cdc_write(tempbuf, (uint32_t) count); + tud_cdc_write_flush(); +} + +// look up new key in previous keys +static inline bool find_key_in_report(hid_keyboard_report_t const *report, uint8_t keycode) +{ + for(uint8_t i=0; i<6; i++) + { + if (report->keycode[i] == keycode) return true; + } + + return false; +} + + +// convert hid keycode to ascii and print via usb device CDC (ignore non-printable) +static void process_kbd_report(uint8_t dev_addr, hid_keyboard_report_t const *report) +{ + (void) dev_addr; + static hid_keyboard_report_t prev_report = { 0, 0, {0} }; // previous report to check key released + bool flush = false; + + for(uint8_t i=0; i<6; i++) + { + uint8_t keycode = report->keycode[i]; + if ( keycode ) + { + if ( find_key_in_report(&prev_report, keycode) ) + { + // exist in previous report means the current key is holding + }else + { + // not existed in previous report means the current key is pressed + + // remap the key code for Colemak layout + #ifdef KEYBOARD_COLEMAK + uint8_t colemak_key_code = colemak[keycode]; + if (colemak_key_code != 0) keycode = colemak_key_code; + #endif + + bool const is_shift = report->modifier & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT); + uint8_t ch = keycode2ascii[keycode][is_shift ? 1 : 0]; + + if (ch) + { + if (ch == '\n') tud_cdc_write("\r", 1); + tud_cdc_write(&ch, 1); + flush = true; + } + } + } + // TODO example skips key released + } + + if (flush) tud_cdc_write_flush(); + + prev_report = *report; +} + +// send mouse report to usb device CDC +static void process_mouse_report(uint8_t dev_addr, hid_mouse_report_t const * report) +{ + //------------- button state -------------// + //uint8_t button_changed_mask = report->buttons ^ prev_report.buttons; + char l = report->buttons & MOUSE_BUTTON_LEFT ? 'L' : '-'; + char m = report->buttons & MOUSE_BUTTON_MIDDLE ? 'M' : '-'; + char r = report->buttons & MOUSE_BUTTON_RIGHT ? 'R' : '-'; + + char tempbuf[32]; + int count = sprintf(tempbuf, "[%u] %c%c%c %d %d %d\r\n", dev_addr, l, m, r, report->x, report->y, report->wheel); + + tud_cdc_write(tempbuf, (uint32_t) count); + tud_cdc_write_flush(); +} + +// Invoked when received report from device via interrupt endpoint +void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len) +{ + (void) len; + uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); + + switch(itf_protocol) + { + case HID_ITF_PROTOCOL_KEYBOARD: + process_kbd_report(dev_addr, (hid_keyboard_report_t const*) report ); + break; + + case HID_ITF_PROTOCOL_MOUSE: + process_mouse_report(dev_addr, (hid_mouse_report_t const*) report ); + break; + + default: break; + } + + // continue to request to receive report + if ( !tuh_hid_receive_report(dev_addr, instance) ) + { + tud_cdc_write_str("Error: cannot request report\r\n"); + } +} + +//--------------------------------------------------------------------+ +// Blinking Task +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/examples/dual/host_hid_to_device_cdc/src/tusb_config.h b/examples/dual/host_hid_to_device_cdc/src/tusb_config.h new file mode 100644 index 000000000..f749bd712 --- /dev/null +++ b/examples/dual/host_hid_to_device_cdc/src/tusb_config.h @@ -0,0 +1,143 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + +// RHPort number used for host can be defined by board.mk, default to port 1 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 1 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack, Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_ENABLED 1 +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED + +// Enable Host stack, Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_ENABLED 1 +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 +// Use pico-pio-usb as host controller for raspberry rp2040 +#define CFG_TUH_RPI_PIO_USB 1 +#endif + + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 1 + +// CDC FIFO size of TX and RX +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +// CDC Endpoint transfer buffer size, more is faster +#define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +//-------------------------------------------------------------------- +// HOST CONFIGURATION +//-------------------------------------------------------------------- + +// Size of buffer to hold descriptors and other data used for enumeration +#define CFG_TUH_ENUMERATION_BUFSIZE 256 + +#define CFG_TUH_HUB 1 +// max device support (excluding hub device) +#define CFG_TUH_DEVICE_MAX (CFG_TUH_HUB ? 4 : 1) // hub typically has 4 ports + +#define CFG_TUH_HID 4 +#define CFG_TUH_HID_EPIN_BUFSIZE 64 +#define CFG_TUH_HID_EPOUT_BUFSIZE 64 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c new file mode 100644 index 000000000..6b0a89127 --- /dev/null +++ b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c @@ -0,0 +1,265 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +#define USB_VID 0xCafe +#define USB_BCD 0x0200 + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = USB_BCD, + + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = USB_VID, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum +{ + ITF_NUM_CDC = 0, + ITF_NUM_CDC_DATA, + ITF_NUM_TOTAL +}; + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ... + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x82 + +#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X + // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x83 + +#elif CFG_TUSB_MCU == OPT_MCU_CXD56 + // CXD56 doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number + // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) + #define EPNUM_CDC_NOTIF 0x83 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x81 + +#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X + // FT9XX doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x83 + +#else + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x82 + +#endif + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN) + +// full speed configuration +uint8_t const desc_fs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), +}; + +#if TUD_OPT_HIGH_SPEED +// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration + +// high speed configuration +uint8_t const desc_hs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512), +}; + +// other speed configuration +uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; + +// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed +tusb_desc_device_qualifier_t const desc_device_qualifier = +{ + .bLength = sizeof(tusb_desc_device_qualifier_t), + .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, + .bcdUSB = USB_BCD, + + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bNumConfigurations = 0x01, + .bReserved = 0x00 +}; + +// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. +// device_qualifier descriptor describes information about a high-speed capable device that would +// change if the device were operating at the other speed. If not highspeed capable stall this request. +uint8_t const* tud_descriptor_device_qualifier_cb(void) +{ + return (uint8_t const*) &desc_device_qualifier; +} + +// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa +uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + + // if link speed is high return fullspeed config, and vice versa + // Note: the descriptor type is OHER_SPEED_CONFIG instead of CONFIG + memcpy(desc_other_speed_config, + (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration, + CONFIG_TOTAL_LEN); + + desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG; + + return desc_other_speed_config; +} + +#endif // highspeed + + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456789012", // 3: Serials, should use chip ID + "TinyUSB CDC", // 4: CDC Interface +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = (uint8_t) strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; i<chr_count; i++) + { + _desc_str[1+i] = str[i]; + } + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); + + return _desc_str; +} diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt new file mode 100644 index 000000000..bc04b01a7 --- /dev/null +++ b/examples/host/bare_api/CMakeLists.txt @@ -0,0 +1,30 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_host_example(${PROJECT}) + +# For rp2040, un-comment to enable pico-pio-usb +# family_add_pico_pio_usb(${PROJECT})
\ No newline at end of file diff --git a/examples/host/bare_api/Makefile b/examples/host/bare_api/Makefile new file mode 100644 index 000000000..13e14df53 --- /dev/null +++ b/examples/host/bare_api/Makefile @@ -0,0 +1,27 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += \ + src/main.c + +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +# TODO: suppress warning caused by host stack +CFLAGS += -Wno-error=cast-align -Wno-error=null-dereference + +# TinyUSB Host Stack source +SRC_C += \ + src/class/cdc/cdc_host.c \ + src/class/hid/hid_host.c \ + src/class/msc/msc_host.c \ + src/host/hub.c \ + src/host/usbh.c \ + src/portable/ohci/ohci.c \ + src/portable/nxp/lpc17_40/hcd_lpc17_40.c + +include ../../rules.mk diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt new file mode 100644 index 000000000..fa9c14857 --- /dev/null +++ b/examples/host/bare_api/only.txt @@ -0,0 +1,11 @@ +mcu:LPC175X_6X +mcu:LPC177X_8X +mcu:LPC18XX +mcu:LPC40XX +mcu:LPC43XX +mcu:MIMXRT +mcu:MIMXRT10XX +mcu:MIMXRT11XX +mcu:RP2040 +mcu:MSP432E4 +mcu:RX65X diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c new file mode 100644 index 000000000..51cab2de0 --- /dev/null +++ b/examples/host/bare_api/src/main.c @@ -0,0 +1,419 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +/* This example current worked and tested with following controller + * - Sony DualShock 4 [CUH-ZCT2x] VID = 0x054c, PID = 0x09cc + */ + + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board.h" +#include "tusb.h" + +// English +#define LANGUAGE_ID 0x0409 +#define BUF_COUNT 4 + + +tusb_desc_device_t desc_device; + +uint8_t buf_pool[BUF_COUNT][64]; +uint8_t buf_owner[BUF_COUNT] = { 0 }; // device address that owns buffer + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ +void led_blinking_task(void); + +static void print_utf16(uint16_t *temp_buf, size_t buf_len); +void print_device_descriptor(tuh_xfer_t* xfer); +void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* desc_cfg); + +uint8_t* get_hid_buf(uint8_t daddr); +void free_hid_buf(uint8_t daddr); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + printf("TinyUSB Bare API Example\r\n"); + + // init host stack on configured roothub port + tuh_init(BOARD_TUH_RHPORT); + + while (1) + { + // tinyusb host task + tuh_task(); + led_blinking_task(); + } + + return 0; +} + +/*------------- TinyUSB Callbacks -------------*/ + +// Invoked when device is mounted (configured) +void tuh_mount_cb (uint8_t daddr) +{ + printf("Device attached, address = %d\r\n", daddr); + + // Get Device Descriptor + // TODO: invoking control transfer now has issue with mounting hub with multiple devices attached, fix later + tuh_descriptor_get_device(daddr, &desc_device, 18, print_device_descriptor, 0); +} + +/// Invoked when device is unmounted (bus reset/unplugged) +void tuh_umount_cb(uint8_t daddr) +{ + printf("Device removed, address = %d\r\n", daddr); + free_hid_buf(daddr); +} + +//--------------------------------------------------------------------+ +// Device Descriptor +//--------------------------------------------------------------------+ + +void print_device_descriptor(tuh_xfer_t* xfer) +{ + if ( XFER_RESULT_SUCCESS != xfer->result ) + { + printf("Failed to get device descriptor\r\n"); + return; + } + + uint8_t const daddr = xfer->daddr; + + printf("Device %u: ID %04x:%04x\r\n", daddr, desc_device.idVendor, desc_device.idProduct); + printf("Device Descriptor:\r\n"); + printf(" bLength %u\r\n" , desc_device.bLength); + printf(" bDescriptorType %u\r\n" , desc_device.bDescriptorType); + printf(" bcdUSB %04x\r\n" , desc_device.bcdUSB); + printf(" bDeviceClass %u\r\n" , desc_device.bDeviceClass); + printf(" bDeviceSubClass %u\r\n" , desc_device.bDeviceSubClass); + printf(" bDeviceProtocol %u\r\n" , desc_device.bDeviceProtocol); + printf(" bMaxPacketSize0 %u\r\n" , desc_device.bMaxPacketSize0); + printf(" idVendor 0x%04x\r\n" , desc_device.idVendor); + printf(" idProduct 0x%04x\r\n" , desc_device.idProduct); + printf(" bcdDevice %04x\r\n" , desc_device.bcdDevice); + + // Get String descriptor using Sync API + uint16_t temp_buf[128]; + + printf(" iManufacturer %u " , desc_device.iManufacturer); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf)) ) + { + print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); + } + printf("\r\n"); + + printf(" iProduct %u " , desc_device.iProduct); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) + { + print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); + } + printf("\r\n"); + + printf(" iSerialNumber %u " , desc_device.iSerialNumber); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) + { + print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); + } + printf("\r\n"); + + printf(" bNumConfigurations %u\r\n" , desc_device.bNumConfigurations); + + // Get configuration descriptor with sync API + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_configuration_sync(daddr, 0, temp_buf, sizeof(temp_buf))) + { + parse_config_descriptor(daddr, (tusb_desc_configuration_t*) temp_buf); + } +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +// count total length of an interface +uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_t itf_count, uint16_t max_len); + +void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len); + +// simple configuration parser to open and listen to HID Endpoint IN +void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* desc_cfg) +{ + uint8_t const* desc_end = ((uint8_t const*) desc_cfg) + tu_le16toh(desc_cfg->wTotalLength); + uint8_t const* p_desc = tu_desc_next(desc_cfg); + + // parse each interfaces + while( p_desc < desc_end ) + { + uint8_t assoc_itf_count = 1; + + // Class will always starts with Interface Association (if any) and then Interface descriptor + if ( TUSB_DESC_INTERFACE_ASSOCIATION == tu_desc_type(p_desc) ) + { + tusb_desc_interface_assoc_t const * desc_iad = (tusb_desc_interface_assoc_t const *) p_desc; + assoc_itf_count = desc_iad->bInterfaceCount; + + p_desc = tu_desc_next(p_desc); // next to Interface + } + + // must be interface from now + if( TUSB_DESC_INTERFACE != tu_desc_type(p_desc) ) return; + tusb_desc_interface_t const* desc_itf = (tusb_desc_interface_t const*) p_desc; + + uint16_t const drv_len = count_interface_total_len(desc_itf, assoc_itf_count, (uint16_t) (desc_end-p_desc)); + + // probably corrupted descriptor + if(drv_len < sizeof(tusb_desc_interface_t)) return; + + // only open and listen to HID endpoint IN + if (desc_itf->bInterfaceClass == TUSB_CLASS_HID) + { + open_hid_interface(dev_addr, desc_itf, drv_len); + } + + // next Interface or IAD descriptor + p_desc += drv_len; + } +} + +uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_t itf_count, uint16_t max_len) +{ + uint8_t const* p_desc = (uint8_t const*) desc_itf; + uint16_t len = 0; + + while (itf_count--) + { + // Next on interface desc + len += tu_desc_len(desc_itf); + p_desc = tu_desc_next(p_desc); + + while (len < max_len) + { + // return on IAD regardless of itf count + if ( tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION ) return len; + + if ( (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) && + ((tusb_desc_interface_t const*) p_desc)->bAlternateSetting == 0 ) + { + break; + } + + len += tu_desc_len(p_desc); + p_desc = tu_desc_next(p_desc); + } + } + + return len; +} + +//--------------------------------------------------------------------+ +// HID Interface +//--------------------------------------------------------------------+ + +void hid_report_received(tuh_xfer_t* xfer); + +void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len) +{ + // len = interface + hid + n*endpoints + uint16_t const drv_len = (uint16_t) (sizeof(tusb_desc_interface_t) + sizeof(tusb_hid_descriptor_hid_t) + + desc_itf->bNumEndpoints * sizeof(tusb_desc_endpoint_t)); + + // corrupted descriptor + if (max_len < drv_len) return; + + uint8_t const *p_desc = (uint8_t const *) desc_itf; + + // HID descriptor + p_desc = tu_desc_next(p_desc); + tusb_hid_descriptor_hid_t const *desc_hid = (tusb_hid_descriptor_hid_t const *) p_desc; + if(HID_DESC_TYPE_HID != desc_hid->bDescriptorType) return; + + // Endpoint descriptor + p_desc = tu_desc_next(p_desc); + tusb_desc_endpoint_t const * desc_ep = (tusb_desc_endpoint_t const *) p_desc; + + for(int i = 0; i < desc_itf->bNumEndpoints; i++) + { + if (TUSB_DESC_ENDPOINT != desc_ep->bDescriptorType) return; + + if(tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) + { + // skip if failed to open endpoint + if ( ! tuh_edpt_open(daddr, desc_ep) ) return; + + uint8_t* buf = get_hid_buf(daddr); + if (!buf) return; // out of memory + + tuh_xfer_t xfer = + { + .daddr = daddr, + .ep_addr = desc_ep->bEndpointAddress, + .buflen = 64, + .buffer = buf, + .complete_cb = hid_report_received, + .user_data = (uintptr_t) buf, // since buffer is not available in callback, use user data to store the buffer + }; + + // submit transfer for this EP + tuh_edpt_xfer(&xfer); + + printf("Listen to [dev %u: ep %02x]\r\n", daddr, desc_ep->bEndpointAddress); + } + + p_desc = tu_desc_next(p_desc); + desc_ep = (tusb_desc_endpoint_t const *) p_desc; + } +} + +void hid_report_received(tuh_xfer_t* xfer) +{ + // Note: not all field in xfer is available for use (i.e filled by tinyusb stack) in callback to save sram + // For instance, xfer->buffer is NULL. We have used user_data to store buffer when submitted callback + uint8_t* buf = (uint8_t*) xfer->user_data; + + if (xfer->result == XFER_RESULT_SUCCESS) + { + printf("[dev %u: ep %02x] HID Report:", xfer->daddr, xfer->ep_addr); + for(uint32_t i=0; i<xfer->actual_len; i++) + { + if (i%16 == 0) printf("\r\n "); + printf("%02X ", buf[i]); + } + printf("\r\n"); + } + + // continue to submit transfer, with updated buffer + // other field remain the same + xfer->buflen = 64; + xfer->buffer = buf; + + tuh_edpt_xfer(xfer); +} + +//--------------------------------------------------------------------+ +// Buffer helper +//--------------------------------------------------------------------+ + +// get an buffer from pool +uint8_t* get_hid_buf(uint8_t daddr) +{ + for(size_t i=0; i<BUF_COUNT; i++) + { + if (buf_owner[i] == 0) + { + buf_owner[i] = daddr; + return buf_pool[i]; + } + } + + // out of memory, increase BUF_COUNT + return NULL; +} + +// free all buffer owned by device +void free_hid_buf(uint8_t daddr) +{ + for(size_t i=0; i<BUF_COUNT; i++) + { + if (buf_owner[i] == daddr) buf_owner[i] = 0; + } +} + +//--------------------------------------------------------------------+ +// Blinking Task +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + const uint32_t interval_ms = 1000; + static uint32_t start_ms = 0; + + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < interval_ms) return; // not enough time + start_ms += interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} + +//--------------------------------------------------------------------+ +// String Descriptor Helper +//--------------------------------------------------------------------+ + +static void _convert_utf16le_to_utf8(const uint16_t *utf16, size_t utf16_len, uint8_t *utf8, size_t utf8_len) { + // TODO: Check for runover. + (void)utf8_len; + // Get the UTF-16 length out of the data itself. + + for (size_t i = 0; i < utf16_len; i++) { + uint16_t chr = utf16[i]; + if (chr < 0x80) { + *utf8++ = chr & 0xffu; + } else if (chr < 0x800) { + *utf8++ = (uint8_t)(0xC0 | (chr >> 6 & 0x1F)); + *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F)); + } else { + // TODO: Verify surrogate. + *utf8++ = (uint8_t)(0xE0 | (chr >> 12 & 0x0F)); + *utf8++ = (uint8_t)(0x80 | (chr >> 6 & 0x3F)); + *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F)); + } + // TODO: Handle UTF-16 code points that take two entries. + } +} + +// Count how many bytes a utf-16-le encoded string will take in utf-8. +static int _count_utf8_bytes(const uint16_t *buf, size_t len) { + size_t total_bytes = 0; + for (size_t i = 0; i < len; i++) { + uint16_t chr = buf[i]; + if (chr < 0x80) { + total_bytes += 1; + } else if (chr < 0x800) { + total_bytes += 2; + } else { + total_bytes += 3; + } + // TODO: Handle UTF-16 code points that take two entries. + } + return (int) total_bytes; +} + +static void print_utf16(uint16_t *temp_buf, size_t buf_len) { + size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t); + size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len); + _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); + ((uint8_t*) temp_buf)[utf8_len] = '\0'; + + printf((char*)temp_buf); +} diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h new file mode 100644 index 000000000..ed0aaf7da --- /dev/null +++ b/examples/host/bare_api/src/tusb_config.h @@ -0,0 +1,109 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// CONFIGURATION +//-------------------------------------------------------------------- + +// Size of buffer to hold descriptors and other data used for enumeration +#define CFG_TUH_ENUMERATION_BUFSIZE 256 + +// only hub class is enabled +#define CFG_TUH_HUB 1 + +// max device support (excluding hub device) +// 1 hub typically has 4 ports +#define CFG_TUH_DEVICE_MAX (CFG_TUH_HUB ? 4 : 1) + +// Max endpoint per device +#define CFG_TUH_ENDPOINT_MAX 8 + +// Enable tuh_edpt_xfer() API +#define CFG_TUH_API_EDPT_XFER 1 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/examples/host/cdc_msc_hid/.only.MCU_LPC175X_6X b/examples/host/cdc_msc_hid/.only.MCU_LPC175X_6X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/cdc_msc_hid/.only.MCU_LPC175X_6X +++ /dev/null diff --git a/examples/host/cdc_msc_hid/.only.MCU_LPC177X_8X b/examples/host/cdc_msc_hid/.only.MCU_LPC177X_8X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/cdc_msc_hid/.only.MCU_LPC177X_8X +++ /dev/null diff --git a/examples/host/cdc_msc_hid/.only.MCU_LPC18XX b/examples/host/cdc_msc_hid/.only.MCU_LPC18XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/cdc_msc_hid/.only.MCU_LPC18XX +++ /dev/null diff --git a/examples/host/cdc_msc_hid/.only.MCU_LPC40XX b/examples/host/cdc_msc_hid/.only.MCU_LPC40XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/cdc_msc_hid/.only.MCU_LPC40XX +++ /dev/null diff --git a/examples/host/cdc_msc_hid/.only.MCU_LPC43XX b/examples/host/cdc_msc_hid/.only.MCU_LPC43XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/cdc_msc_hid/.only.MCU_LPC43XX +++ /dev/null diff --git a/examples/host/cdc_msc_hid/.only.MCU_MIMXRT10XX b/examples/host/cdc_msc_hid/.only.MCU_MIMXRT10XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/cdc_msc_hid/.only.MCU_MIMXRT10XX +++ /dev/null diff --git a/examples/host/cdc_msc_hid/.only.MCU_RP2040 b/examples/host/cdc_msc_hid/.only.MCU_RP2040 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/cdc_msc_hid/.only.MCU_RP2040 +++ /dev/null diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index 0a99bc3a9..c4a4d8e63 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -26,4 +26,7 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT})
\ No newline at end of file +family_configure_host_example(${PROJECT}) + +# For rp2040, un-comment to enable pico-pio-usb +# family_add_pico_pio_usb(${PROJECT}) diff --git a/examples/host/cdc_msc_hid/Makefile b/examples/host/cdc_msc_hid/Makefile index 0ad9dd856..272acbac8 100644 --- a/examples/host/cdc_msc_hid/Makefile +++ b/examples/host/cdc_msc_hid/Makefile @@ -19,10 +19,7 @@ SRC_C += \ src/class/msc/msc_host.c \ src/host/hub.c \ src/host/usbh.c \ - src/host/usbh_control.c \ - src/portable/ehci/ehci.c \ src/portable/ohci/ohci.c \ - src/portable/nxp/transdimension/hcd_transdimension.c \ src/portable/nxp/lpc17_40/hcd_lpc17_40.c include ../../rules.mk diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt new file mode 100644 index 000000000..fa9c14857 --- /dev/null +++ b/examples/host/cdc_msc_hid/only.txt @@ -0,0 +1,11 @@ +mcu:LPC175X_6X +mcu:LPC177X_8X +mcu:LPC18XX +mcu:LPC40XX +mcu:LPC43XX +mcu:MIMXRT +mcu:MIMXRT10XX +mcu:MIMXRT11XX +mcu:RP2040 +mcu:MSP432E4 +mcu:RX65X diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index a14be05ea..664cbf035 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -45,7 +45,8 @@ int main(void) printf("TinyUSB Host CDC MSC HID Example\r\n"); - tusb_init(); + // init host stack on configured roothub port + tuh_init(BOARD_TUH_RHPORT); while (1) { @@ -71,20 +72,6 @@ int main(void) #if CFG_TUH_CDC CFG_TUSB_MEM_SECTION static char serial_in_buffer[64] = { 0 }; -void tuh_mount_cb(uint8_t dev_addr) -{ - // application set-up - printf("A device with address %d is mounted\r\n", dev_addr); - - tuh_cdc_receive(dev_addr, serial_in_buffer, sizeof(serial_in_buffer), true); // schedule first transfer -} - -void tuh_umount_cb(uint8_t dev_addr) -{ - // application tear-down - printf("A device with address %d is unmounted \r\n", dev_addr); -} - // invoked ISR context void tuh_cdc_xfer_isr(uint8_t dev_addr, xfer_result_t event, cdc_pipeid_t pipe_id, uint32_t xferred_bytes) { @@ -109,6 +96,19 @@ void cdc_task(void) // TinyUSB Callbacks //--------------------------------------------------------------------+ +void tuh_mount_cb(uint8_t dev_addr) +{ + // application set-up + printf("A device with address %d is mounted\r\n", dev_addr); +} + +void tuh_umount_cb(uint8_t dev_addr) +{ + // application tear-down + printf("A device with address %d is unmounted \r\n", dev_addr); +} + + //--------------------------------------------------------------------+ // Blinking Task //--------------------------------------------------------------------+ diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index bc6c68e5b..33f34315b 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -30,27 +30,42 @@ extern "C" { #endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + //-------------------------------------------------------------------- // COMMON CONFIGURATION //-------------------------------------------------------------------- // defined by compiler flags for flexibility #ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined +#error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_HOST | OPT_MODE_HIGH_SPEED) -#else - #define CFG_TUSB_RHPORT0_MODE OPT_MODE_HOST +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE #endif -#ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -74,7 +89,7 @@ // Size of buffer to hold descriptors and other data used for enumeration #define CFG_TUH_ENUMERATION_BUFSIZE 256 -#define CFG_TUH_HUB 1 +#define CFG_TUH_HUB 1 // number of supported hubs #define CFG_TUH_CDC 1 #define CFG_TUH_HID 4 // typical keyboard + mouse device can have 3-4 HID interfaces #define CFG_TUH_MSC 1 diff --git a/examples/host/hid_controller/.only.MCU_LPC175X_6X b/examples/host/hid_controller/.only.MCU_LPC175X_6X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/hid_controller/.only.MCU_LPC175X_6X +++ /dev/null diff --git a/examples/host/hid_controller/.only.MCU_LPC177X_8X b/examples/host/hid_controller/.only.MCU_LPC177X_8X deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/hid_controller/.only.MCU_LPC177X_8X +++ /dev/null diff --git a/examples/host/hid_controller/.only.MCU_LPC18XX b/examples/host/hid_controller/.only.MCU_LPC18XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/hid_controller/.only.MCU_LPC18XX +++ /dev/null diff --git a/examples/host/hid_controller/.only.MCU_LPC40XX b/examples/host/hid_controller/.only.MCU_LPC40XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/hid_controller/.only.MCU_LPC40XX +++ /dev/null diff --git a/examples/host/hid_controller/.only.MCU_LPC43XX b/examples/host/hid_controller/.only.MCU_LPC43XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/hid_controller/.only.MCU_LPC43XX +++ /dev/null diff --git a/examples/host/hid_controller/.only.MCU_MIMXRT10XX b/examples/host/hid_controller/.only.MCU_MIMXRT10XX deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/hid_controller/.only.MCU_MIMXRT10XX +++ /dev/null diff --git a/examples/host/hid_controller/.only.MCU_RP2040 b/examples/host/hid_controller/.only.MCU_RP2040 deleted file mode 100644 index e69de29bb..000000000 --- a/examples/host/hid_controller/.only.MCU_RP2040 +++ /dev/null diff --git a/examples/host/hid_controller/CMakeLists.txt b/examples/host/hid_controller/CMakeLists.txt index aaf8bc34f..6153d399a 100644 --- a/examples/host/hid_controller/CMakeLists.txt +++ b/examples/host/hid_controller/CMakeLists.txt @@ -25,4 +25,7 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT})
\ No newline at end of file +family_configure_host_example(${PROJECT}) + +# For rp2040, un-comment to enable pico-pio-usb +# family_add_pico_pio_usb(${PROJECT}) diff --git a/examples/host/hid_controller/Makefile b/examples/host/hid_controller/Makefile index 2595ec4a7..06dc56914 100644 --- a/examples/host/hid_controller/Makefile +++ b/examples/host/hid_controller/Makefile @@ -9,7 +9,7 @@ INC += \ EXAMPLE_SOURCE += \ src/hid_app.c \ src/main.c - + SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) # TODO: suppress warning caused by host stack @@ -22,10 +22,7 @@ SRC_C += \ src/class/msc/msc_host.c \ src/host/hub.c \ src/host/usbh.c \ - src/host/usbh_control.c \ - src/portable/ehci/ehci.c \ src/portable/ohci/ohci.c \ - src/portable/nxp/transdimension/hcd_transdimension.c \ src/portable/nxp/lpc17_40/hcd_lpc17_40.c include ../../rules.mk diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt new file mode 100644 index 000000000..fa9c14857 --- /dev/null +++ b/examples/host/hid_controller/only.txt @@ -0,0 +1,11 @@ +mcu:LPC175X_6X +mcu:LPC177X_8X +mcu:LPC18XX +mcu:LPC40XX +mcu:LPC43XX +mcu:MIMXRT +mcu:MIMXRT10XX +mcu:MIMXRT11XX +mcu:RP2040 +mcu:MSP432E4 +mcu:RX65X diff --git a/examples/host/hid_controller/src/hid_app.c b/examples/host/hid_controller/src/hid_app.c index bbfea8182..582e01959 100644 --- a/examples/host/hid_controller/src/hid_app.c +++ b/examples/host/hid_controller/src/hid_app.c @@ -138,6 +138,8 @@ void hid_app_task(void) // therefore report_desc = NULL, desc_len = 0 void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_report, uint16_t desc_len) { + (void)desc_report; + (void)desc_len; uint16_t vid, pid; tuh_vid_pid_get(dev_addr, &vid, &pid); diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c index b9b37a4d2..299a3ff10 100644 --- a/examples/host/hid_controller/src/main.c +++ b/examples/host/hid_controller/src/main.c @@ -49,9 +49,10 @@ int main(void) board_init(); printf("TinyUSB Host HID Controller Example\r\n"); - printf("Note: Events only displayed for explictly supported controllers\r\n"); + printf("Note: Events only displayed for explicit supported controllers\r\n"); - tusb_init(); + // init host stack on configured roothub port + tuh_init(BOARD_TUH_RHPORT); while (1) { diff --git a/examples/host/hid_controller/src/tusb_config.h b/examples/host/hid_controller/src/tusb_config.h index 74b471ae4..475b9ca8f 100644 --- a/examples/host/hid_controller/src/tusb_config.h +++ b/examples/host/hid_controller/src/tusb_config.h @@ -30,27 +30,42 @@ extern "C" { #endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + //-------------------------------------------------------------------- // COMMON CONFIGURATION //-------------------------------------------------------------------- // defined by compiler flags for flexibility #ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined +#error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_HOST | OPT_MODE_HIGH_SPEED) -#else - #define CFG_TUSB_RHPORT0_MODE OPT_MODE_HOST +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE #endif -#ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put diff --git a/examples/make.mk b/examples/make.mk index 793c40aa2..47520d660 100644 --- a/examples/make.mk +++ b/examples/make.mk @@ -45,15 +45,12 @@ else SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c)) endif -# Fetch submodules depended by family -fetch_submodule_if_empty = $(if $(wildcard $(TOP)/$1/*),,$(info $(shell git -C $(TOP) submodule update --init $1))) -ifdef DEPS_SUBMODULES - $(foreach s,$(DEPS_SUBMODULES),$(call fetch_submodule_if_empty,$(s))) -endif #-------------- Cross Compiler ------------ # Can be set by board, default to ARM GCC CROSS_COMPILE ?= arm-none-eabi- +# Allow for -Os to be changed by board makefiles in case -Os is not allowed +CFLAGS_OPTIMIZED ?= -Os CC = $(CROSS_COMPILE)gcc CXX = $(CROSS_COMPILE)g++ @@ -88,13 +85,13 @@ CFLAGS += \ -ffunction-sections \ -fsingle-precision-constant \ -fno-strict-aliasing \ - -Wdouble-promotion \ - -Wstrict-prototypes \ - -Wstrict-overflow \ -Wall \ -Wextra \ -Werror \ -Wfatal-errors \ + -Wdouble-promotion \ + -Wstrict-prototypes \ + -Wstrict-overflow \ -Werror-implicit-function-declaration \ -Wfloat-equal \ -Wundef \ @@ -106,13 +103,19 @@ CFLAGS += \ -Wcast-align \ -Wcast-function-type \ -Wcast-qual \ - -Wnull-dereference + -Wnull-dereference \ + -Wuninitialized \ + -Wunused \ + -Wredundant-decls +# conversion is too strict for most mcu driver, may be disable sign/int/arith-conversion +# -Wconversion + # Debugging/Optimization ifeq ($(DEBUG), 1) CFLAGS += -Og else - CFLAGS += -Os + CFLAGS += $(CFLAGS_OPTIMIZED) endif # Log level is mapped to TUSB DEBUG option diff --git a/examples/rules.mk b/examples/rules.mk index 4cc35cb22..c3134056a 100644 --- a/examples/rules.mk +++ b/examples/rules.mk @@ -5,6 +5,7 @@ # Set all as default goal .DEFAULT_GOAL := all +# ---------------- GNU Make Start ----------------------- # ESP32-Sx and RP2040 has its own CMake build system ifeq (,$(findstring $(FAMILY),esp32s2 esp32s3 rp2040)) @@ -12,8 +13,10 @@ ifeq (,$(findstring $(FAMILY),esp32s2 esp32s3 rp2040)) # Compiler Flags # --------------------------------------- +LIBS_GCC ?= -lgcc -lm -lnosys + # libc -LIBS += -lgcc -lm -lnosys +LIBS += $(LIBS_GCC) ifneq ($(BOARD), spresense) LIBS += -lc @@ -49,7 +52,11 @@ ifeq ($(NO_LTO),1) CFLAGS := $(filter-out -flto,$(CFLAGS)) endif -LDFLAGS += $(CFLAGS) -Wl,-T,$(TOP)/$(LD_FILE) -Wl,[email protected] -Wl,-cref -Wl,-gc-sections +ifneq ($(LD_FILE),) +LDFLAGS_LD_FILE ?= -Wl,-T,$(TOP)/$(LD_FILE) +endif + +LDFLAGS += $(CFLAGS) $(LDFLAGS_LD_FILE) -Wl,[email protected] -Wl,-cref -Wl,-gc-sections ifneq ($(SKIP_NANOLIB), 1) LDFLAGS += -specs=nosys.specs -specs=nano.specs endif @@ -135,7 +142,23 @@ $(BUILD)/obj/%_asm.o: %.S @echo AS $(notdir $@) @$(CC) -x assembler-with-cpp $(ASFLAGS) -c -o $@ $< -endif # GNU Make +endif + +.PHONY: clean +clean: +ifeq ($(CMDEXE),1) + rd /S /Q $(subst /,\,$(BUILD)) +else + $(RM) -rf $(BUILD) +endif +# ---------------- GNU Make End ----------------------- + +# get depenecies +.PHONY: get-deps +get-deps: + ifdef DEPS_SUBMODULES + git -C $(TOP) submodule update --init $(DEPS_SUBMODULES) + endif size: $(BUILD)/$(PROJECT).elf -@echo '' @@ -146,14 +169,6 @@ size: $(BUILD)/$(PROJECT).elf linkermap: $(BUILD)/$(PROJECT).elf @linkermap -v $<.map -.PHONY: clean -clean: -ifeq ($(CMDEXE),1) - rd /S /Q $(subst /,\,$(BUILD)) -else - $(RM) -rf $(BUILD) -endif - # --------------------------------------- # Flash Targets # --------------------------------------- @@ -182,11 +197,18 @@ flash-jlink: $(BUILD)/$(PROJECT).hex flash-stlink: $(BUILD)/$(PROJECT).elf STM32_Programmer_CLI --connect port=swd --write $< --go +$(BUILD)/$(PROJECT)-sunxi.bin: $(BUILD)/$(PROJECT).bin + $(PYTHON) $(TOP)/tools/mksunxi.py $< $@ + +flash-xfel: $(BUILD)/$(PROJECT)-sunxi.bin + xfel spinor write 0 $< + xfel reset + # Flash using pyocd PYOCD_OPTION ?= flash-pyocd: $(BUILD)/$(PROJECT).hex pyocd flash -t $(PYOCD_TARGET) $(PYOCD_OPTION) $< - pyocd reset -t $(PYOCD_TARGET) + #pyocd reset -t $(PYOCD_TARGET) # Flash using openocd OPENOCD_OPTION ?= |