diff options
Diffstat (limited to 'examples')
43 files changed, 309 insertions, 205 deletions
diff --git a/examples/build_system/make/make.mk b/examples/build_system/make/make.mk index dbc73903e..f70748d34 100644 --- a/examples/build_system/make/make.mk +++ b/examples/build_system/make/make.mk @@ -123,27 +123,24 @@ endif ifeq (${MAX3421_HOST},1) SRC_C += src/portable/analog/max3421/hcd_max3421.c CFLAGS += -DCFG_TUH_MAX3421=1 - CMAKE_DEFSYM += -DMAX3421_HOST=1 endif # Log level is mapped to TUSB DEBUG option ifneq ($(LOG),) - CMAKE_DEFSYM += -DLOG=$(LOG) CFLAGS += -DCFG_TUSB_DEBUG=$(LOG) endif # Logger: default is uart, can be set to rtt or swo -ifneq ($(LOGGER),) - CMAKE_DEFSYM += -DLOGGER=$(LOGGER) -endif - ifeq ($(LOGGER),rtt) - CFLAGS += -DLOGGER_RTT -DSEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL - RTT_SRC = lib/SEGGER_RTT - INC += $(TOP)/$(RTT_SRC)/RTT - SRC_C += $(RTT_SRC)/RTT/SEGGER_RTT.c -else ifeq ($(LOGGER),swo) + CFLAGS += -DLOGGER_RTT + #CFLAGS += -DSEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL + INC += $(TOP)/$(lib/SEGGER_RTT)/RTT + SRC_C += $(lib/SEGGER_RTT)/RTT/SEGGER_RTT.c +endif +ifeq ($(LOGGER),swo) CFLAGS += -DLOGGER_SWO +else + CFLAGS += -DLOGGER_UART endif # CPU specific flags diff --git a/examples/device/audio_4_channel_mic_freertos/src/main.c b/examples/device/audio_4_channel_mic_freertos/src/main.c index 3f82398a2..9c76380a2 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/main.c +++ b/examples/device/audio_4_channel_mic_freertos/src/main.c @@ -39,7 +39,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -157,15 +157,15 @@ int main(void) { xTaskCreate(audio_isr_task, "audio", AUDIO_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); #endif -// skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUSB_MCU_VENDOR_ESPRESSIF - vTaskStartScheduler(); -#endif + // only start scheduler for non-espressif mcu + #ifndef ESP_PLATFORM + vTaskStartScheduler(); + #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h index 5ac51b153..f7c0efe08 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ extern "C" { #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/audio_test_freertos/src/main.c b/examples/device/audio_test_freertos/src/main.c index 0a6cdfd4f..b1119c888 100644 --- a/examples/device/audio_test_freertos/src/main.c +++ b/examples/device/audio_test_freertos/src/main.c @@ -38,7 +38,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -140,15 +140,15 @@ int main(void) { xTaskCreate(audio_isr_task, "audio", AUDIO_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); #endif -// skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUSB_MCU_VENDOR_ESPRESSIF - vTaskStartScheduler(); -#endif + // only start scheduler for non-espressif mcu + #ifndef ESP_PLATFORM + vTaskStartScheduler(); + #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h index 4b61e72bc..b708e2541 100644 --- a/examples/device/audio_test_freertos/src/tusb_config.h +++ b/examples/device/audio_test_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ extern "C" { #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c index 2269d45f1..d91a8760e 100644 --- a/examples/device/board_test/src/main.c +++ b/examples/device/board_test/src/main.c @@ -49,25 +49,34 @@ int main(void) { while (1) { uint32_t interval_ms = board_button_read() ? BLINK_PRESSED : BLINK_UNPRESSED; + int ch = board_getchar(); + if (ch > 0) { + board_putchar(ch); + #ifndef LOGGER_UART + board_uart_write(&ch, 1); + #endif + } + // Blink and print every interval ms if (!(board_millis() - start_ms < interval_ms)) { - board_uart_write(HELLO_STR, strlen(HELLO_STR)); - start_ms = board_millis(); + if (ch < 0) { + // skip if echoing + printf(HELLO_STR); + + #ifndef LOGGER_UART + board_uart_write(HELLO_STR, strlen(HELLO_STR)); + #endif + } + board_led_write(led_state); led_state = 1 - led_state; // toggle } - - // echo - uint8_t ch; - if (board_uart_read(&ch, 1) > 0) { - board_uart_write(&ch, 1); - } } } -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } diff --git a/examples/device/board_test/src/tusb_config.h b/examples/device/board_test/src/tusb_config.h index 8ac3bc8de..81829d450 100644 --- a/examples/device/board_test/src/tusb_config.h +++ b/examples/device/board_test/src/tusb_config.h @@ -44,7 +44,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index 63ae8a8c9..5a3e18358 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -98,27 +98,33 @@ void tud_umount_cb(void) { blink_interval_ms = BLINK_NOT_MOUNTED; } - //--------------------------------------------------------------------+ // USB CDC //--------------------------------------------------------------------+ static void cdc_task(void) { - uint8_t itf; - - for (itf = 0; itf < CFG_TUD_CDC; itf++) { + for (uint8_t itf = 0; itf < CFG_TUD_CDC; itf++) { // connected() check for DTR bit // Most but not all terminal client set this when making connection // if ( tud_cdc_n_connected(itf) ) { if (tud_cdc_n_available(itf)) { uint8_t buf[64]; - uint32_t count = tud_cdc_n_read(itf, buf, sizeof(buf)); // echo back to both serial ports echo_serial_port(0, buf, count); echo_serial_port(1, buf, count); } + + // Press on-board button to send Uart status notification + static uint32_t btn_prev = 0; + static cdc_notify_uart_state_t uart_state = { .value = 0 }; + const uint32_t btn = board_button_read(); + if (!btn_prev && btn) { + uart_state.dsr ^= 1; + tud_cdc_notify_uart_state(&uart_state); + } + btn_prev = btn; } } } diff --git a/examples/device/cdc_dual_ports/src/tusb_config.h b/examples/device/cdc_dual_ports/src/tusb_config.h index 070f08ed1..7f7df3909 100644 --- a/examples/device/cdc_dual_ports/src/tusb_config.h +++ b/examples/device/cdc_dual_ports/src/tusb_config.h @@ -97,6 +97,8 @@ #define CFG_TUD_MIDI 0 #define CFG_TUD_VENDOR 0 +#define CFG_TUD_CDC_NOTIFY 1 // Enable use of notification endpoint + // CDC FIFO size of TX and RX #define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index 7776eb958..bbcb479f5 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -42,8 +42,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = -{ +tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -68,16 +67,14 @@ tusb_desc_device_t const desc_device = // Invoked when received GET DEVICE DESCRIPTOR // Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ +uint8_t const *tud_descriptor_device_cb(void) { return (uint8_t const *) &desc_device; } //--------------------------------------------------------------------+ // Configuration Descriptor //--------------------------------------------------------------------+ -enum -{ +enum { ITF_NUM_CDC_0 = 0, ITF_NUM_CDC_0_DATA, ITF_NUM_CDC_1, @@ -130,36 +127,32 @@ enum #define EPNUM_CDC_1_IN 0x84 #endif -uint8_t const desc_fs_configuration[] = -{ +uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 16, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 64), // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 16, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 64), }; #if TUD_OPT_HIGH_SPEED // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration - -uint8_t const desc_hs_configuration[] = -{ +uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 512), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 16, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 512), // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 512), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 16, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 512), }; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = -{ +tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -177,34 +170,31 @@ tusb_desc_device_qualifier_t const desc_device_qualifier = // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. // device_qualifier descriptor describes information about a high-speed capable device that would // change if the device were operating at the other speed. If not highspeed capable stall this request. -uint8_t const* tud_descriptor_device_qualifier_cb(void) -{ - return (uint8_t const*) &desc_device_qualifier; +uint8_t const *tud_descriptor_device_qualifier_cb(void) { + return (uint8_t const *) &desc_device_qualifier; } // Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete // Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa -uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) -{ - (void) index; // for multiple configurations +uint8_t const *tud_descriptor_other_speed_configuration_cb(uint8_t index) { + (void) index;// for multiple configurations // if link speed is high return fullspeed config, and vice versa - return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration; + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration; } -#endif // highspeed +#endif// highspeed // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ +uint8_t const *tud_descriptor_configuration_cb(uint8_t index) { (void) index; // for multiple configurations #if TUD_OPT_HIGH_SPEED // Although we are highspeed, host may be fullspeed. - return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; #else return desc_fs_configuration; #endif @@ -223,8 +213,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = -{ +char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer "TinyUSB Device", // 2: Product @@ -254,14 +243,14 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) { return NULL; } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if ( chr_count > max_count ) { chr_count = max_count; } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { @@ -272,6 +261,5 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // first byte is length (including header), second byte is string type _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); - return _desc_str; } diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index f36c910d7..5cd93e7dd 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -119,6 +119,16 @@ void cdc_task(void) { tud_cdc_write(buf, count); tud_cdc_write_flush(); } + + // Press on-board button to send Uart status notification + static uint32_t btn_prev = 0; + static cdc_notify_uart_state_t uart_state = { .value = 0 }; + const uint32_t btn = board_button_read(); + if (!btn_prev && btn) { + uart_state.dsr ^= 1; + tud_cdc_notify_uart_state(&uart_state); + } + btn_prev = btn; } } diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index 9645f4bfc..458681f58 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -184,7 +184,7 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void *buff } // Check for overflow of offset + bufsize - if (offset + bufsize > DISK_BLOCK_SIZE) { + if (lba * DISK_BLOCK_SIZE + offset + bufsize > DISK_BLOCK_NUM * DISK_BLOCK_SIZE) { return -1; } diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h index 03e0e649c..811d464e9 100644 --- a/examples/device/cdc_msc/src/tusb_config.h +++ b/examples/device/cdc_msc/src/tusb_config.h @@ -87,7 +87,7 @@ //-------------------------------------------------------------------- #ifndef CFG_TUD_ENDPOINT0_SIZE -#define CFG_TUD_ENDPOINT0_SIZE 64 +#define CFG_TUD_ENDPOINT0_SIZE 64 #endif //------------- CLASS -------------// @@ -97,6 +97,8 @@ #define CFG_TUD_MIDI 0 #define CFG_TUD_VENDOR 0 +#define CFG_TUD_CDC_NOTIFY 1 // Enable use of notification endpoint + // CDC FIFO size of TX and RX #define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c index 4b6b88041..edcee0462 100644 --- a/examples/device/cdc_msc/src/usb_descriptors.c +++ b/examples/device/cdc_msc/src/usb_descriptors.c @@ -52,7 +52,6 @@ tusb_desc_device_t const desc_device = { .bDeviceClass = TUSB_CLASS_MISC, .bDeviceSubClass = MISC_SUBCLASS_COMMON, .bDeviceProtocol = MISC_PROTOCOL_IAD, - .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, .idVendor = USB_VID, @@ -131,7 +130,7 @@ uint8_t const desc_fs_configuration[] = { TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 16, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), // Interface number, string index, EP Out & EP In address, EP size TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64), @@ -146,7 +145,7 @@ uint8_t const desc_hs_configuration[] = { TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 16, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512), // Interface number, string index, EP Out & EP In address, EP size TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512), @@ -197,7 +196,6 @@ uint8_t const *tud_descriptor_other_speed_configuration_cb(uint8_t index) { #endif // highspeed - // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete @@ -256,14 +254,14 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) { return NULL; } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if ( chr_count > max_count ) { chr_count = max_count; } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { @@ -274,6 +272,5 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // first byte is length (including header), second byte is string type _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); - return _desc_str; } diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index c51e8ea81..09ccc9bf3 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -30,7 +30,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USBD_STACK_SIZE 4096 #else // Increase stack size when debug log is enabled @@ -72,7 +72,7 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; static void usb_device_task(void *param); void led_blinking_task(void* param); void cdc_task(void *params); - +extern void msc_disk_init(void); //--------------------------------------------------------------------+ // Main //--------------------------------------------------------------------+ @@ -91,15 +91,15 @@ int main(void) { xTaskCreate(cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL); #endif -#if !TUSB_MCU_VENDOR_ESPRESSIF - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 +#ifndef ESP_PLATFORM + // only start scheduler for non-espressif mcu vTaskStartScheduler(); #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } @@ -123,6 +123,7 @@ static void usb_device_task(void *param) { board_init_after_tusb(); } + msc_disk_init(); // RTOS forever loop while (1) { // put this thread to waiting state until there is new events @@ -188,6 +189,16 @@ void cdc_task(void *params) { } tud_cdc_write_flush(); + + // Press on-board button to send Uart status notification + static uint32_t btn_prev = 0; + static cdc_notify_uart_state_t uart_state = { .value = 0 }; + const uint32_t btn = board_button_read(); + if (!btn_prev && btn) { + uart_state.dsr ^= 1; + tud_cdc_notify_uart_state(&uart_state); + } + btn_prev = btn; } // For ESP32-Sx this delay is essential to allow idle how to run and reset watchdog diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index d325d77fa..d1ff2f71b 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -28,6 +28,37 @@ #if CFG_TUD_MSC +// Use async IO in example or not +#define CFG_EXAMPLE_MSC_ASYNC_IO 1 + +// Simulate read/write operation delay +#define CFG_EXAMPLE_MSC_IO_DELAY_MS 0 + +#if CFG_EXAMPLE_MSC_ASYNC_IO +#define IO_STACK_SIZE configMINIMAL_STACK_SIZE + +typedef struct { + uint8_t lun; + bool is_read; + uint32_t lba; + uint32_t offset; + void* buffer; + uint32_t bufsize; +} io_ops_t; + +QueueHandle_t io_queue; +#if configSUPPORT_STATIC_ALLOCATION +uint8_t io_queue_buf[sizeof(io_ops_t)]; +StaticQueue_t io_queue_static; +StackType_t io_stack[IO_STACK_SIZE]; +StaticTask_t io_taskdef; +#endif + +static void io_task(void *params); +#endif + +void msc_disk_init(void); + // whether host does safe-eject static bool ejected = false; @@ -40,8 +71,7 @@ static bool ejected = false; If you find any bugs or get any questions, feel free to file an\r\n\ issue at github.com/hathach/tinyusb" -enum -{ +enum { DISK_BLOCK_NUM = 16, // 8KB is the smallest size that windows allow to mount DISK_BLOCK_SIZE = 512 }; @@ -119,16 +149,52 @@ uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = README_CONTENTS }; +#if CFG_EXAMPLE_MSC_ASYNC_IO +void msc_disk_init() { + +#if configSUPPORT_STATIC_ALLOCATION + io_queue = xQueueCreateStatic(1, sizeof(io_ops_t), io_queue_buf, &io_queue_static); + xTaskCreateStatic(io_task, "io", IO_STACK_SIZE, NULL, 2, io_stack, &io_taskdef); +#else + io_queue = xQueueCreate(1, sizeof(io_ops_t)); + xTaskCreate(io_task, "io", IO_STACK_SIZE, NULL, 2, NULL); +#endif +} + +static void io_task(void *params) { + (void) params; + io_ops_t io_ops; + while (1) { + if (xQueueReceive(io_queue, &io_ops, portMAX_DELAY)) { + const uint8_t* addr = msc_disk[io_ops.lba] + io_ops.offset; + int32_t nbytes = io_ops.bufsize; + if (io_ops.is_read) { + memcpy(io_ops.buffer, addr, io_ops.bufsize); + } else { +#ifndef CFG_EXAMPLE_MSC_READONLY + memcpy((uint8_t*) addr, io_ops.buffer, io_ops.bufsize); +#else + nbytes = -1; // failed to write +#endif + } + + tusb_time_delay_ms_api(CFG_EXAMPLE_MSC_IO_DELAY_MS); + tud_msc_async_io_done(nbytes, false); + } + } +} + +#else +void msc_disk_init() {} +#endif + // Invoked when received SCSI_CMD_INQUIRY // Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively -void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) -{ +void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) { (void) lun; - const char vid[] = "TinyUSB"; const char pid[] = "Mass Storage"; const char rev[] = "1.0"; - memcpy(vendor_id , vid, strlen(vid)); memcpy(product_id , pid, strlen(pid)); memcpy(product_rev, rev, strlen(rev)); @@ -136,8 +202,7 @@ void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16 // Invoked when received Test Unit Ready command. // return true allowing host to read/write this LUN e.g SD card inserted -bool tud_msc_test_unit_ready_cb(uint8_t lun) -{ +bool tud_msc_test_unit_ready_cb(uint8_t lun) { (void) lun; // RAM disk is ready until ejected @@ -152,10 +217,8 @@ bool tud_msc_test_unit_ready_cb(uint8_t lun) // Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size // Application update block count and block size -void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size) -{ +void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size) { (void) lun; - *block_count = DISK_BLOCK_NUM; *block_size = DISK_BLOCK_SIZE; } @@ -163,18 +226,14 @@ void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_siz // Invoked when received Start Stop Unit command // - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage // - Start = 1 : active mode, if load_eject = 1 : load disk storage -bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) -{ +bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) { (void) lun; (void) power_condition; - if ( load_eject ) - { - if (start) - { + if (load_eject) { + if (start) { // load disk storage - }else - { + } else { // unload disk storage ejected = true; } @@ -185,90 +244,107 @@ bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, boo // Callback invoked when received READ10 command. // Copy disk's data to buffer (up to bufsize) and return number of copied bytes. -int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) -{ +int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) { (void) lun; // out of ramdisk - if ( lba >= DISK_BLOCK_NUM ) { - return -1; + if (lba >= DISK_BLOCK_NUM) { + return TUD_MSC_RET_ERROR; } // Check for overflow of offset + bufsize - if ( offset + bufsize > DISK_BLOCK_SIZE ) { - return -1; + if (lba * DISK_BLOCK_SIZE + offset + bufsize > DISK_BLOCK_NUM * DISK_BLOCK_SIZE) { + return TUD_MSC_RET_ERROR; } - uint8_t const* addr = msc_disk[lba] + offset; - memcpy(buffer, addr, bufsize); + #if CFG_EXAMPLE_MSC_ASYNC_IO + io_ops_t io_ops = {.is_read = true, .lun = lun, .lba = lba, .offset = offset, .buffer = buffer, .bufsize = bufsize}; - return (int32_t) bufsize; + // Send IO operation to IO task + TU_ASSERT(xQueueSend(io_queue, &io_ops, 0) == pdPASS); + + return TUD_MSC_RET_ASYNC; + #else + uint8_t const *addr = msc_disk[lba] + offset; + memcpy(buffer, addr, bufsize); + return bufsize; + #endif } -bool tud_msc_is_writable_cb (uint8_t lun) -{ +bool tud_msc_is_writable_cb (uint8_t lun) { (void) lun; -#ifdef CFG_EXAMPLE_MSC_READONLY + #ifdef CFG_EXAMPLE_MSC_READONLY return false; -#else + #else return true; -#endif + #endif } // Callback invoked when received WRITE10 command. // Process data in buffer to disk's storage and return number of written bytes -int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) -{ +int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) { + // out of ramdisk + if (lba >= DISK_BLOCK_NUM) { + return TUD_MSC_RET_ERROR; + } + + // Check for overflow of offset + bufsize + if (lba * DISK_BLOCK_SIZE + offset + bufsize > DISK_BLOCK_NUM * DISK_BLOCK_SIZE) { + return TUD_MSC_RET_ERROR; + } + + #ifdef CFG_EXAMPLE_MSC_READONLY (void) lun; + (void) buffer; + return bufsize; + #endif - // out of ramdisk - if ( lba >= DISK_BLOCK_NUM ) return -1; + #if CFG_EXAMPLE_MSC_ASYNC_IO + io_ops_t io_ops = {.is_read = false, .lun = lun, .lba = lba, .offset = offset, .buffer = buffer, .bufsize = bufsize}; -#ifndef CFG_EXAMPLE_MSC_READONLY - uint8_t* addr = msc_disk[lba] + offset; + // Send IO operation to IO task + TU_ASSERT(xQueueSend(io_queue, &io_ops, 0) == pdPASS); + + return TUD_MSC_RET_ASYNC; + #else + uint8_t *addr = msc_disk[lba] + offset; memcpy(addr, buffer, bufsize); -#else - (void) lba; (void) offset; (void) buffer; -#endif + tusb_time_delay_ms_api(CFG_EXAMPLE_MSC_IO_DELAY_MS); - return (int32_t) bufsize; + return bufsize; + #endif } // Callback invoked when received an SCSI command not in built-in list below // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE // - READ10 and WRITE10 has their own callbacks -int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) -{ +int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) { // read10 & write10 has their own callback and MUST not be handled here - void const* response = NULL; + void const *response = NULL; int32_t resplen = 0; // most scsi handled is input bool in_xfer = true; - switch (scsi_cmd[0]) - { + switch (scsi_cmd[0]) { default: // Set Sense = Invalid Command Operation tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); // negative means error -> tinyusb could stall and/or response with failed status resplen = -1; - break; + break; } // return resplen must not larger than bufsize - if ( resplen > bufsize ) resplen = bufsize; + if (resplen > bufsize) { resplen = bufsize; } - if ( response && (resplen > 0) ) - { - if(in_xfer) - { + if (response && (resplen > 0)) { + if (in_xfer) { memcpy(buffer, response, (size_t) resplen); - }else - { + } else { // SCSI output } } diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index c3f2f7fb5..9cc3a18d1 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif @@ -104,6 +104,8 @@ #define CFG_TUD_MIDI 0 #define CFG_TUD_VENDOR 0 +#define CFG_TUD_CDC_NOTIFY 1 // Enable use of notification endpoint + // CDC FIFO size of TX and RX #define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c index 405a57fe4..a55fa3675 100644 --- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c +++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -52,7 +52,6 @@ tusb_desc_device_t const desc_device = { .bDeviceClass = TUSB_CLASS_MISC, .bDeviceSubClass = MISC_SUBCLASS_COMMON, .bDeviceProtocol = MISC_PROTOCOL_IAD, - .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, .idVendor = USB_VID, @@ -131,7 +130,7 @@ uint8_t const desc_fs_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 16, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), // Interface number, string index, EP Out & EP In address, EP size TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64), @@ -147,7 +146,7 @@ uint8_t const desc_hs_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 16, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512), // Interface number, string index, EP Out & EP In address, EP size TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512), @@ -176,16 +175,14 @@ tusb_desc_device_qualifier_t const desc_device_qualifier = // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. // device_qualifier descriptor describes information about a high-speed capable device that would // change if the device were operating at the other speed. If not highspeed capable stall this request. -uint8_t const* tud_descriptor_device_qualifier_cb(void) -{ +uint8_t const* tud_descriptor_device_qualifier_cb(void) { return (uint8_t const*) &desc_device_qualifier; } // Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete // Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa -uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) -{ +uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) { (void) index; // for multiple configurations // if link speed is high return fullspeed config, and vice versa @@ -204,13 +201,12 @@ uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { (void) index; // for multiple configurations #if TUD_OPT_HIGH_SPEED // Although we are highspeed, host may be fullspeed. - return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; #else return desc_fs_configuration; #endif @@ -229,8 +225,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = -{ +char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer "TinyUSB Device", // 2: Product @@ -261,14 +256,14 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) { return NULL; } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if ( chr_count > max_count ) { chr_count = max_count; } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { @@ -279,6 +274,5 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // first byte is length (including header), second byte is string type _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); - return _desc_str; } diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index 30c0331ef..3f5e8a91c 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -31,7 +31,7 @@ #include "tusb.h" #include "usb_descriptors.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -112,17 +112,16 @@ int main(void) xTimerStart(blinky_tm, 0); - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu +#ifndef ESP_PLATFORM vTaskStartScheduler(); #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF -void app_main(void) -{ +#ifdef ESP_PLATFORM +void app_main(void) { main(); } #endif diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h index 6ec38b95c..b28033a0c 100644 --- a/examples/device/hid_composite_freertos/src/tusb_config.h +++ b/examples/device/hid_composite_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/midi_test_freertos/src/main.c b/examples/device/midi_test_freertos/src/main.c index dbe89080c..3e406d38d 100644 --- a/examples/device/midi_test_freertos/src/main.c +++ b/examples/device/midi_test_freertos/src/main.c @@ -40,7 +40,7 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USBD_STACK_SIZE 4096 #else // Increase stack size when debug log is enabled @@ -95,15 +95,15 @@ int main(void) { xTaskCreate(midi_task, "midi", MIDI_STACK_SIZE, NULL, configMAX_PRIORITIES - 2, NULL); #endif -#if !TUSB_MCU_VENDOR_ESPRESSIF - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 +#ifndef ESP_PLATFORM + // only start scheduler for non-espressif mcu vTaskStartScheduler(); #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } diff --git a/examples/device/net_lwip_webserver/Makefile b/examples/device/net_lwip_webserver/Makefile index 141532466..4ad110dec 100644 --- a/examples/device/net_lwip_webserver/Makefile +++ b/examples/device/net_lwip_webserver/Makefile @@ -1,5 +1,3 @@ -DEPS_SUBMODULES += lib/lwip - include ../../build_system/make/make.mk # suppress warning caused by lwip diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 04d4af4e5..0406279fd 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -292,7 +292,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -351,8 +351,8 @@ void freertos_init_task(void) { xTaskCreate(video_task, "video", VIDEO_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL); #endif - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu + #ifndef ESP_PLATFORM vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h index 6dbd6f2a5..4ba86ca65 100644 --- a/examples/device/video_capture/src/tusb_config.h +++ b/examples/device/video_capture/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c index 245e7abb8..dc616e3fa 100644 --- a/examples/device/video_capture_2ch/src/main.c +++ b/examples/device/video_capture_2ch/src/main.c @@ -300,7 +300,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -359,8 +359,8 @@ void freertos_init_task(void) { xTaskCreate(video_task, "video", VIDEO_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL); #endif - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu + #ifndef ESP_PLATFORM vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture_2ch/src/tusb_config.h b/examples/device/video_capture_2ch/src/tusb_config.h index 91775a327..e84e49879 100644 --- a/examples/device/video_capture_2ch/src/tusb_config.h +++ b/examples/device/video_capture_2ch/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/dual/host_hid_to_device_cdc/only.txt b/examples/dual/host_hid_to_device_cdc/only.txt index 3f40b4e7c..35f896f1e 100644 --- a/examples/dual/host_hid_to_device_cdc/only.txt +++ b/examples/dual/host_hid_to_device_cdc/only.txt @@ -1,6 +1,7 @@ board:mimxrt1060_evk board:mimxrt1064_evk board:mcb1800 +mcu:CH32V20X mcu:RP2040 mcu:ra6m5 mcu:MAX3421 diff --git a/examples/dual/host_info_to_device_cdc/only.txt b/examples/dual/host_info_to_device_cdc/only.txt index 3f40b4e7c..35f896f1e 100644 --- a/examples/dual/host_info_to_device_cdc/only.txt +++ b/examples/dual/host_info_to_device_cdc/only.txt @@ -1,6 +1,7 @@ board:mimxrt1060_evk board:mimxrt1064_evk board:mcb1800 +mcu:CH32V20X mcu:RP2040 mcu:ra6m5 mcu:MAX3421 diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index dcdaf41c7..31dcb108c 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index dcdaf41c7..31dcb108c 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X diff --git a/examples/host/cdc_msc_hid/src/cdc_app.c b/examples/host/cdc_msc_hid/src/cdc_app.c index e68ec383b..97f1a96d6 100644 --- a/examples/host/cdc_msc_hid/src/cdc_app.c +++ b/examples/host/cdc_msc_hid/src/cdc_app.c @@ -31,8 +31,7 @@ static size_t get_console_inputs(uint8_t* buf, size_t bufsize) { size_t count = 0; while (count < bufsize) { int ch = board_getchar(); - if (ch <= 0) break; - + if (ch <= 0) { break; } buf[count] = (uint8_t) ch; count++; } @@ -69,10 +68,15 @@ void tuh_cdc_rx_cb(uint8_t idx) { uint32_t const bufsize = sizeof(buf) - 1; // forward cdc interfaces -> console - uint32_t count = tuh_cdc_read(idx, buf, bufsize); - buf[count] = 0; + const uint32_t count = tuh_cdc_read(idx, buf, bufsize); + if (count) { + buf[count] = 0; + printf("%s", (char*) buf); - printf("%s", (char*) buf); + #ifndef __ICCARM__ // TODO IAR doesn't support stream control ? + fflush(stdout);// flush right away, else nanolib will wait for newline + #endif + } } // Invoked when a device with CDC interface is mounted @@ -88,7 +92,7 @@ void tuh_cdc_mount_cb(uint8_t idx) { // If CFG_TUH_CDC_LINE_CODING_ON_ENUM is defined, line coding will be set by tinyusb stack // while eneumerating new cdc device cdc_line_coding_t line_coding = {0}; - if (tuh_cdc_get_local_line_coding(idx, &line_coding)) { + if (tuh_cdc_get_line_coding_local(idx, &line_coding)) { printf(" Baudrate: %" PRIu32 ", Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); printf(" Parity : %u, Data Width: %u\r\n", line_coding.parity, line_coding.data_bits); } diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index cc8d6e5c4..2f8cb5e03 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -103,10 +103,11 @@ #define CFG_TUH_ENUMERATION_BUFSIZE 256 #define CFG_TUH_HUB 1 // number of supported hubs -#define CFG_TUH_CDC 1 // CDC ACM +#define CFG_TUH_CDC 2 // number of supported CDC devices. also activates CDC ACM #define CFG_TUH_CDC_FTDI 1 // FTDI Serial. FTDI is not part of CDC class, only to re-use CDC driver API #define CFG_TUH_CDC_CP210X 1 // CP210x Serial. CP210X is not part of CDC class, only to re-use CDC driver API #define CFG_TUH_CDC_CH34X 1 // CH340 or CH341 Serial. CH34X is not part of CDC class, only to re-use CDC driver API +#define CFG_TUH_CDC_PL2303 1 // PL2303 Serial. PL2303 is not part of CDC class, only to re-use CDC driver API #define CFG_TUH_HID (3*CFG_TUH_DEVICE_MAX) // typical keyboard + mouse device can have 3-4 HID interfaces #define CFG_TUH_MSC 1 #define CFG_TUH_VENDOR 0 @@ -122,7 +123,7 @@ // Set Line Control state on enumeration/mounted: // DTR ( bit 0), RTS (bit 1) -#define CFG_TUH_CDC_LINE_CONTROL_ON_ENUM 0x03 +#define CFG_TUH_CDC_LINE_CONTROL_ON_ENUM (CDC_CONTROL_LINE_STATE_DTR | CDC_CONTROL_LINE_STATE_RTS) // Set Line Coding on enumeration/mounted, value for cdc_line_coding_t // bit rate = 115200, 1 stop bit, no parity, 8 bit data width diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index e279ad509..d99760a02 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -27,7 +27,7 @@ #include "tusb.h" #include "bsp/board_api.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CDC_STACK_SZIE 2048 #else #define CDC_STACK_SZIE (3*configMINIMAL_STACK_SIZE/2) diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index 64a108254..0bcb355ec 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -30,7 +30,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USBH_STACK_SIZE 4096 #else // Increase stack size when debug log is enabled @@ -86,15 +86,15 @@ int main(void) { xTimerStart(blinky_tm, 0); - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu +#ifndef ESP_PLATFORM vTaskStartScheduler(); #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index 682265f59..3cdb227e2 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -44,7 +44,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif @@ -108,10 +108,11 @@ #define CFG_TUH_ENUMERATION_BUFSIZE 256 #define CFG_TUH_HUB 1 // number of supported hubs -#define CFG_TUH_CDC 1 // CDC ACM +#define CFG_TUH_CDC 1 // number of supported CDC devices. also activates CDC ACM #define CFG_TUH_CDC_FTDI 1 // FTDI Serial. FTDI is not part of CDC class, only to re-use CDC driver API #define CFG_TUH_CDC_CP210X 1 // CP210x Serial. CP210X is not part of CDC class, only to re-use CDC driver API #define CFG_TUH_CDC_CH34X 1 // CH340 or CH341 Serial. CH34X is not part of CDC class, only to re-use CDC driver API +#define CFG_TUH_CDC_PL2303 1 // PL2303 Serial. PL2303 is not part of CDC class, only to re-use CDC driver API #define CFG_TUH_HID (3*CFG_TUH_DEVICE_MAX) // typical keyboard + mouse device can have 3-4 HID interfaces #define CFG_TUH_MSC 1 #define CFG_TUH_VENDOR 0 @@ -127,7 +128,7 @@ // Set Line Control state on enumeration/mounted: // DTR ( bit 0), RTS (bit 1) -#define CFG_TUH_CDC_LINE_CONTROL_ON_ENUM 0x03 +#define CFG_TUH_CDC_LINE_CONTROL_ON_ENUM (CDC_CONTROL_LINE_STATE_DTR | CDC_CONTROL_LINE_STATE_RTS) // Set Line Coding on enumeration/mounted, value for cdc_line_coding_t // bit rate = 115200, 1 stop bit, no parity, 8 bit data width diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index b5a4b6739..94ddc73c3 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:ESP32S2 mcu:ESP32S3 mcu:ESP32P4 diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index e924a137b..7189972d6 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -268,7 +268,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USB_STACK_SIZE 4096 #else // Increase stack size when debug log is enabled @@ -285,7 +285,7 @@ StackType_t usb_stack[USB_STACK_SIZE]; StaticTask_t usb_taskdef; #endif -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } @@ -308,8 +308,8 @@ void init_freertos_task(void) { xTaskCreate(usb_host_task, "usbh", USB_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); #endif - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu +#ifndef ESP_PLATFORM vTaskStartScheduler(); #endif } diff --git a/examples/host/device_info/src/tusb_config.h b/examples/host/device_info/src/tusb_config.h index e12970c12..e4ca2528e 100644 --- a/examples/host/device_info/src/tusb_config.h +++ b/examples/host/device_info/src/tusb_config.h @@ -40,7 +40,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index dcdaf41c7..31dcb108c 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X diff --git a/examples/host/midi_rx/only.txt b/examples/host/midi_rx/only.txt index b5a4b6739..94ddc73c3 100644 --- a/examples/host/midi_rx/only.txt +++ b/examples/host/midi_rx/only.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:ESP32S2 mcu:ESP32S3 mcu:ESP32P4 diff --git a/examples/host/midi_rx/src/tusb_config.h b/examples/host/midi_rx/src/tusb_config.h index c9b430388..76bdf87f3 100644 --- a/examples/host/midi_rx/src/tusb_config.h +++ b/examples/host/midi_rx/src/tusb_config.h @@ -40,7 +40,7 @@ extern "C" { #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index dcdaf41c7..31dcb108c 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X diff --git a/examples/typec/power_delivery/src/main.c b/examples/typec/power_delivery/src/main.c index 068dbbeb1..de0db4721 100644 --- a/examples/typec/power_delivery/src/main.c +++ b/examples/typec/power_delivery/src/main.c @@ -71,9 +71,8 @@ int main(void) } } -#if TUSB_MCU_VENDOR_ESPRESSIF -void app_main(void) -{ +#ifdef ESP_PLATFORM +void app_main(void) { main(); } #endif |