diff options
Diffstat (limited to 'examples')
34 files changed, 365 insertions, 187 deletions
diff --git a/examples/device/CMakeLists.txt b/examples/device/CMakeLists.txt index 4ed693cde..a0e4600f6 100644 --- a/examples/device/CMakeLists.txt +++ b/examples/device/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) project(tinyusb_device_examples) family_initialize_project(tinyusb_device_examples ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/device/audio_4_channel_mic/CMakeLists.txt b/examples/device/audio_4_channel_mic/CMakeLists.txt index b653fc91f..f6e10e2ea 100644 --- a/examples/device/audio_4_channel_mic/CMakeLists.txt +++ b/examples/device/audio_4_channel_mic/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/device/audio_test/CMakeLists.txt b/examples/device/audio_test/CMakeLists.txt index fac0ca64f..cb321f9a8 100644 --- a/examples/device/audio_test/CMakeLists.txt +++ b/examples/device/audio_test/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/device/board_test/CMakeLists.txt b/examples/device/board_test/CMakeLists.txt index 8cd5b9ea4..37113578e 100644 --- a/examples/device/board_test/CMakeLists.txt +++ b/examples/device/board_test/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # Check for -DFAMILY= if(FAMILY MATCHES "^esp32s[2-3]") @@ -12,7 +12,6 @@ if(FAMILY MATCHES "^esp32s[2-3]") set(TOP "../../..") get_filename_component(TOP "${TOP}" REALPATH) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) project(${PROJECT}) else() diff --git a/examples/device/cdc_dual_ports/CMakeLists.txt b/examples/device/cdc_dual_ports/CMakeLists.txt index 18367a893..abc4d91da 100644 --- a/examples/device/cdc_dual_ports/CMakeLists.txt +++ b/examples/device/cdc_dual_ports/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index 5da761a04..fa6e83b7e 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/device/cdc_msc_freertos/CMakeLists.txt b/examples/device/cdc_msc_freertos/CMakeLists.txt index 1d04a8518..639dde99a 100644 --- a/examples/device/cdc_msc_freertos/CMakeLists.txt +++ b/examples/device/cdc_msc_freertos/CMakeLists.txt @@ -1,20 +1,22 @@ cmake_minimum_required(VERSION 3.5) -# use BOARD-Directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) - # TOP is absolute path to root directory of TinyUSB git repo +# needed for esp32sx build. TOOD could be removed later on set(TOP "../../..") get_filename_component(TOP "${TOP}" REALPATH) -# Check for -DFAMILY= -if(FAMILY MATCHES "^esp32s[2-3]") - cmake_minimum_required(VERSION 3.5) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) - project(${PROJECT}) +project(${PROJECT}) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +# Check for -DFAMILY= +if(FAMILY MATCHES "^esp32s[2-3]") else() message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") endif() diff --git a/examples/device/cdc_msc_freertos/src/freertos_hook.c b/examples/device/cdc_msc_freertos/src/freertos_hook.c index 273ad46e6..ab885947c 100644 --- a/examples/device/cdc_msc_freertos/src/freertos_hook.c +++ b/examples/device/cdc_msc_freertos/src/freertos_hook.c @@ -94,7 +94,7 @@ void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, Stack *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH; } -#if CFG_TUSB_MCU == OPT_MCU_RX63X +#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X #include "iodefine.h" void vApplicationSetupTimerInterrupt(void) { diff --git a/examples/device/dfu/CMakeLists.txt b/examples/device/dfu/CMakeLists.txt index 18367a893..abc4d91da 100644 --- a/examples/device/dfu/CMakeLists.txt +++ b/examples/device/dfu/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/device/dfu_runtime/CMakeLists.txt b/examples/device/dfu_runtime/CMakeLists.txt index 18367a893..abc4d91da 100644 --- a/examples/device/dfu_runtime/CMakeLists.txt +++ b/examples/device/dfu_runtime/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/device/dynamic_configuration/CMakeLists.txt b/examples/device/dynamic_configuration/CMakeLists.txt index 5da761a04..fa6e83b7e 100644 --- a/examples/device/dynamic_configuration/CMakeLists.txt +++ b/examples/device/dynamic_configuration/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/device/hid_composite/CMakeLists.txt b/examples/device/hid_composite/CMakeLists.txt index 18367a893..abc4d91da 100644 --- a/examples/device/hid_composite/CMakeLists.txt +++ b/examples/device/hid_composite/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index 512f6f9d9..d2a8a28fa 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -255,12 +255,31 @@ uint16_t tud_hid_get_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t // received data on OUT endpoint ( Report ID = 0, Type = 0 ) void tud_hid_set_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize) { - // TODO set LED based on CAPLOCK, NUMLOCK etc... (void) itf; - (void) report_id; - (void) report_type; - (void) buffer; - (void) bufsize; + + if (report_type == HID_REPORT_TYPE_OUTPUT) + { + // Set keyboard LED e.g Capslock, Numlock etc... + if (report_id == REPORT_ID_KEYBOARD) + { + // bufsize should be (at least) 1 + if ( bufsize < 1 ) return; + + uint8_t const kbd_leds = buffer[0]; + + if (kbd_leds & KEYBOARD_LED_CAPSLOCK) + { + // Capslock On: disable blink, turn led on + blink_interval_ms = 0; + board_led_write(true); + }else + { + // Caplocks Off: back to normal blink + board_led_write(false); + blink_interval_ms = BLINK_MOUNTED; + } + } + } } //--------------------------------------------------------------------+ @@ -271,6 +290,9 @@ void led_blinking_task(void) static uint32_t start_ms = 0; static bool led_state = false; + // blink is disabled + if (!blink_interval_ms) return; + // Blink every interval ms if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time start_ms += blink_interval_ms; diff --git a/examples/device/hid_composite_freertos/src/freertos_hook.c b/examples/device/hid_composite_freertos/src/freertos_hook.c index 273ad46e6..ab885947c 100644 --- a/examples/device/hid_composite_freertos/src/freertos_hook.c +++ b/examples/device/hid_composite_freertos/src/freertos_hook.c @@ -94,7 +94,7 @@ void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, Stack *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH; } -#if CFG_TUSB_MCU == OPT_MCU_RX63X +#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X #include "iodefine.h" void vApplicationSetupTimerInterrupt(void) { diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index 47f976427..a61710858 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -315,12 +315,31 @@ uint16_t tud_hid_get_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t // received data on OUT endpoint ( Report ID = 0, Type = 0 ) void tud_hid_set_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize) { - // TODO set LED based on CAPLOCK, NUMLOCK etc... (void) itf; - (void) report_id; - (void) report_type; - (void) buffer; - (void) bufsize; + + if (report_type == HID_REPORT_TYPE_OUTPUT) + { + // Set keyboard LED e.g Capslock, Numlock etc... + if (report_id == REPORT_ID_KEYBOARD) + { + // bufsize should be (at least) 1 + if ( bufsize < 1 ) return; + + uint8_t const kbd_leds = buffer[0]; + + if (kbd_leds & KEYBOARD_LED_CAPSLOCK) + { + // Capslock On: disable blink, turn led on + xTimerStop(blinky_tm, portMAX_DELAY); + board_led_write(true); + }else + { + // Caplocks Off: back to normal blink + board_led_write(false); + xTimerStart(blinky_tm, portMAX_DELAY); + } + } + } } //--------------------------------------------------------------------+ diff --git a/examples/device/hid_generic_inout/CMakeLists.txt b/examples/device/hid_generic_inout/CMakeLists.txt index 18367a893..abc4d91da 100644 --- a/examples/device/hid_generic_inout/CMakeLists.txt +++ b/examples/device/hid_generic_inout/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/device/hid_multiple_interface/CMakeLists.txt b/examples/device/hid_multiple_interface/CMakeLists.txt index 18367a893..abc4d91da 100644 --- a/examples/device/hid_multiple_interface/CMakeLists.txt +++ b/examples/device/hid_multiple_interface/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/device/midi_test/CMakeLists.txt b/examples/device/midi_test/CMakeLists.txt index 18367a893..abc4d91da 100644 --- a/examples/device/midi_test/CMakeLists.txt +++ b/examples/device/midi_test/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/device/msc_dual_lun/CMakeLists.txt b/examples/device/msc_dual_lun/CMakeLists.txt index f60be8eda..9e834ae21 100644 --- a/examples/device/msc_dual_lun/CMakeLists.txt +++ b/examples/device/msc_dual_lun/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt index f1f79b2d1..7500f6e9e 100644 --- a/examples/device/net_lwip_webserver/CMakeLists.txt +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -4,7 +4,7 @@ set(TOP "../../..") get_filename_component(TOP "${TOP}" REALPATH) if (EXISTS ${TOP}/lib/lwip/src) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + include(${TOP}/hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/device/uac2_headset/.skip.MCU_LPC11UXX b/examples/device/uac2_headset/.skip.MCU_LPC11UXX new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/examples/device/uac2_headset/.skip.MCU_LPC11UXX diff --git a/examples/device/uac2_headset/.skip.MCU_LPC13XX b/examples/device/uac2_headset/.skip.MCU_LPC13XX new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/examples/device/uac2_headset/.skip.MCU_LPC13XX diff --git a/examples/device/uac2_headset/.skip.MCU_NUC121 b/examples/device/uac2_headset/.skip.MCU_NUC121 new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/examples/device/uac2_headset/.skip.MCU_NUC121 diff --git a/examples/device/uac2_headset/CMakeLists.txt b/examples/device/uac2_headset/CMakeLists.txt index 18367a893..abc4d91da 100644 --- a/examples/device/uac2_headset/CMakeLists.txt +++ b/examples/device/uac2_headset/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 1b6a770a3..ba27350b4 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -34,9 +34,11 @@ // MACRO CONSTANT TYPEDEF PROTOTYPES //--------------------------------------------------------------------+ -#ifndef AUDIO_SAMPLE_RATE -#define AUDIO_SAMPLE_RATE 48000 -#endif +// List of supported sample rates +const uint32_t sample_rates[] = {44100, 48000, 88200, 96000}; +uint32_t current_sample_rate = 44100; + +#define N_SAMPLE_RATES TU_ARRAY_SIZE(sample_rates) /* Blink pattern * - 25 ms : streaming data @@ -76,11 +78,16 @@ int8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; // +1 for master chan int16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; // +1 for master channel 0 // Buffer for microphone data -int16_t mic_buf[1000]; +int32_t mic_buf[CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ / 4]; // Buffer for speaker data -int16_t spk_buf[1000]; +int32_t spk_buf[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ / 4]; // Speaker data size received in the last frame int spk_data_size; +// Resolution per format +const uint8_t resolutions_per_format[CFG_TUD_AUDIO_FUNC_1_N_FORMATS] = {CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX, + CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX}; +// Current resolution, update on format change +uint8_t current_resolution; void led_blinking_task(void); void audio_task(void); @@ -135,55 +142,35 @@ void tud_resume_cb(void) blink_interval_ms = BLINK_MOUNTED; } -typedef struct TU_ATTR_PACKED -{ - union - { - struct TU_ATTR_PACKED - { - uint8_t recipient : 5; ///< Recipient type tusb_request_recipient_t. - uint8_t type : 2; ///< Request type tusb_request_type_t. - uint8_t direction : 1; ///< Direction type. tusb_dir_t - } bmRequestType_bit; - - uint8_t bmRequestType; - }; - - uint8_t bRequest; ///< Request type audio_cs_req_t - uint8_t bChannelNumber; - uint8_t bControlSelector; - union - { - uint8_t bInterface; - uint8_t bEndpoint; - }; - uint8_t bEntityID; - uint16_t wLength; -} audio_control_request_t; - // Helper for clock get requests static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); - // Example supports only single frequency, same value will be used for current value and range if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) { if (request->bRequest == AUDIO_CS_REQ_CUR) { - TU_LOG2("Clock get current freq %u\r\n", AUDIO_SAMPLE_RATE); + TU_LOG1("Clock get current freq %u\r\n", current_sample_rate); - audio_control_cur_4_t curf = { tu_htole32(AUDIO_SAMPLE_RATE) }; + audio_control_cur_4_t curf = { tu_htole32(current_sample_rate) }; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &curf, sizeof(curf)); } else if (request->bRequest == AUDIO_CS_REQ_RANGE) { - audio_control_range_4_n_t(1) rangef = + audio_control_range_4_n_t(N_SAMPLE_RATES) rangef = { - .wNumSubRanges = tu_htole16(1), - .subrange[0] = { tu_htole32(AUDIO_SAMPLE_RATE), tu_htole32(AUDIO_SAMPLE_RATE), 0} + .wNumSubRanges = tu_htole16(N_SAMPLE_RATES) }; - TU_LOG2("Clock get freq range (%d, %d, %d)\r\n", (int)rangef.subrange[0].bMin, (int)rangef.subrange[0].bMax, (int)rangef.subrange[0].bRes); + TU_LOG1("Clock get %d freq ranges\r\n", N_SAMPLE_RATES); + for(uint8_t i = 0; i < N_SAMPLE_RATES; i++) + { + rangef.subrange[i].bMin = sample_rates[i]; + rangef.subrange[i].bMax = sample_rates[i]; + rangef.subrange[i].bRes = 0; + TU_LOG1("Range %d (%d, %d, %d)\r\n", i, (int)rangef.subrange[i].bMin, (int)rangef.subrange[i].bMax, (int)rangef.subrange[i].bRes); + } + return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &rangef, sizeof(rangef)); } } @@ -191,7 +178,7 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t request->bRequest == AUDIO_CS_REQ_CUR) { audio_control_cur_1_t cur_valid = { .bCur = 1 }; - TU_LOG2("Clock get is valid %u\r\n", cur_valid.bCur); + TU_LOG1("Clock get is valid %u\r\n", cur_valid.bCur); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &cur_valid, sizeof(cur_valid)); } TU_LOG1("Clock get request not supported, entity = %u, selector = %u, request = %u\r\n", @@ -199,6 +186,32 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t return false; } +// Helper for clock set requests +static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf) +{ + (void)rhport; + + TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); + TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR); + + if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) + { + TU_VERIFY(request->wLength == sizeof(audio_control_cur_4_t)); + + current_sample_rate = ((audio_control_cur_4_t *)buf)->bCur; + + TU_LOG1("Clock set current freq: %d\r\n", current_sample_rate); + + return true; + } + else + { + TU_LOG1("Clock set request not supported, entity = %u, selector = %u, request = %u\r\n", + request->bEntityID, request->bControlSelector, request->bRequest); + return false; + } +} + // Helper for feature unit get requests static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_request_t const *request) { @@ -207,7 +220,7 @@ static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_req if (request->bControlSelector == AUDIO_FU_CTRL_MUTE && request->bRequest == AUDIO_CS_REQ_CUR) { audio_control_cur_1_t mute1 = { .bCur = mute[request->bChannelNumber] }; - TU_LOG2("Get channel %u mute %d\r\n", request->bChannelNumber, mute1.bCur); + TU_LOG1("Get channel %u mute %d\r\n", request->bChannelNumber, mute1.bCur); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &mute1, sizeof(mute1)); } else if (UAC2_ENTITY_SPK_FEATURE_UNIT && request->bControlSelector == AUDIO_FU_CTRL_VOLUME) @@ -218,14 +231,14 @@ static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_req .wNumSubRanges = tu_htole16(1), .subrange[0] = { .bMin = tu_htole16(-VOLUME_CTRL_50_DB), tu_htole16(VOLUME_CTRL_0_DB), tu_htole16(256) } }; - TU_LOG2("Get channel %u volume range (%d, %d, %u) dB\r\n", request->bChannelNumber, + TU_LOG1("Get channel %u volume range (%d, %d, %u) dB\r\n", request->bChannelNumber, range_vol.subrange[0].bMin / 256, range_vol.subrange[0].bMax / 256, range_vol.subrange[0].bRes / 256); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &range_vol, sizeof(range_vol)); } else if (request->bRequest == AUDIO_CS_REQ_CUR) { audio_control_cur_2_t cur_vol = { .bCur = tu_htole16(volume[request->bChannelNumber]) }; - TU_LOG2("Get channel %u volume %u dB\r\n", request->bChannelNumber, cur_vol.bCur); + TU_LOG1("Get channel %u volume %d dB\r\n", request->bChannelNumber, cur_vol.bCur / 256); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &cur_vol, sizeof(cur_vol)); } } @@ -249,7 +262,7 @@ static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio_control_req mute[request->bChannelNumber] = ((audio_control_cur_1_t *)buf)->bCur; - TU_LOG2("Set channel %d Mute: %d\r\n", request->bChannelNumber, mute[request->bChannelNumber]); + TU_LOG1("Set channel %d Mute: %d\r\n", request->bChannelNumber, mute[request->bChannelNumber]); return true; } @@ -259,7 +272,7 @@ static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio_control_req volume[request->bChannelNumber] = ((audio_control_cur_2_t const *)buf)->bCur; - TU_LOG2("Set channel %d volume: %d dB\r\n", request->bChannelNumber, volume[request->bChannelNumber] / 256); + TU_LOG1("Set channel %d volume: %d dB\r\n", request->bChannelNumber, volume[request->bChannelNumber] / 256); return true; } @@ -299,7 +312,8 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) return tud_audio_feature_unit_set_request(rhport, request, buf); - + if (request->bEntityID == UAC2_ENTITY_CLOCK) + return tud_audio_clock_set_request(rhport, request, buf); TU_LOG1("Set request not handled, entity = %d, selector = %d, request = %d\r\n", request->bEntityID, request->bControlSelector, request->bRequest); @@ -329,6 +343,13 @@ bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const * p_reque if (ITF_NUM_AUDIO_STREAMING_SPK == itf && alt != 0) blink_interval_ms = BLINK_STREAMING; + // Clear buffer when streaming format is changed + spk_data_size = 0; + if(alt != 0) + { + current_resolution = resolutions_per_format[alt-1]; + } + return true; } @@ -362,20 +383,40 @@ void audio_task(void) { // When new data arrived, copy data from speaker buffer, to microphone buffer // and send it over + // Only support speaker & headphone both have the same resolution + // If one is 16bit another is 24bit be care of LOUD noise ! if (spk_data_size) { - int16_t *src = spk_buf; - int16_t *limit = spk_buf + spk_data_size / 2; - int16_t *dst = mic_buf; - while (src < limit) + if (current_resolution == 16) { - // Combine two channels into one - int32_t left = *src++; - int32_t right = *src++; - *dst++ = (int16_t)((left + right) / 2); + int16_t *src = (int16_t*)spk_buf; + int16_t *limit = (int16_t*)spk_buf + spk_data_size / 2; + int16_t *dst = (int16_t*)mic_buf; + while (src < limit) + { + // Combine two channels into one + int32_t left = *src++; + int32_t right = *src++; + *dst++ = (left >> 1) + (right >> 1); + } + tud_audio_write((uint8_t *)mic_buf, spk_data_size / 2); + spk_data_size = 0; + } + else if (current_resolution == 24) + { + int32_t *src = spk_buf; + int32_t *limit = spk_buf + spk_data_size / 4; + int32_t *dst = mic_buf; + while (src < limit) + { + // Combine two channels into one + int32_t left = *src++; + int32_t right = *src++; + *dst++ = ((left >> 1) + (right >> 1)) & 0xffffff00; + } + tud_audio_write((uint8_t *)mic_buf, spk_data_size / 2); + spk_data_size = 0; } - tud_audio_write((uint8_t *)mic_buf, spk_data_size / 2); - spk_data_size = 0; } } diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h index 88f9efcff..d955a746d 100644 --- a/examples/device/uac2_headset/src/tusb_config.h +++ b/examples/device/uac2_headset/src/tusb_config.h @@ -93,33 +93,49 @@ extern "C" { //-------------------------------------------------------------------- // AUDIO CLASS DRIVER CONFIGURATION //-------------------------------------------------------------------- -#define CFG_TUD_AUDIO_IN_PATH (CFG_TUD_AUDIO) -#define CFG_TUD_AUDIO_OUT_PATH (CFG_TUD_AUDIO) -//#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN 220 // This equals TUD_AUDIO_HEADSET_STEREO_DESC_LEN, however, including it from usb_descriptors.h is not possible due to some strange include hassle -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_HEADSET_STEREO_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_HEADSET_STEREO_DESC_LEN + +// How many formats are used, need to adjust USB descriptor if changed +#define CFG_TUD_AUDIO_FUNC_1_N_FORMATS 2 // Audio format type I specifications -#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 -#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 -#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX 2 -#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX 2 -#define CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP 0 +#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE 96000 // 24bit/96kHz is the best quality for full-speed, high-speed is needed beyond this +#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 +#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX 2 + +// 16bit in 16bit slots +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX 2 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX 16 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX 2 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX 16 + +// 24bit in 32bit slots +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX 4 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX 24 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX 4 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX 24 // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 -#define CFG_TUD_AUDIO_EP_SZ_IN (CFG_TUD_AUDIO_IN_PATH * (48 + 1) * (CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX) * (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX)) // 48 Samples (48 kHz) x 2 Bytes/Sample x n Channels -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ CFG_TUD_AUDIO_EP_SZ_IN -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN // Maximum EP IN size for all AS alternate settings used + +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) + +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN)*2 +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN) // Maximum EP IN size for all AS alternate settings used // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) #define CFG_TUD_AUDIO_ENABLE_EP_OUT 1 -#define CFG_TUD_AUDIO_EP_OUT_SZ (CFG_TUD_AUDIO_OUT_PATH * ((48 + CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP) * (CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX) * (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX))) // N Samples (N kHz) x 2 Bytes/Sample x n Channels -#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ CFG_TUD_AUDIO_EP_OUT_SZ*3 -#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX CFG_TUD_AUDIO_EP_OUT_SZ // Maximum EP IN size for all AS alternate settings used + +#define CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +#define CFG_TUD_AUDIO_UNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) + +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ TU_MAX(CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_UNC_1_FORMAT_2_EP_SZ_OUT)*2 +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO_UNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_UNC_1_FORMAT_2_EP_SZ_OUT) // Maximum EP IN size for all AS alternate settings used // Number of Standard AS Interface Descriptors (4.9.1) defined per audio function - this is required to be able to remember the current alternate settings of these interfaces - We restrict us here to have a constant number for all audio functions (which means this has to be the maximum number of AS interfaces an audio function has and a second audio function with less AS interfaces just wastes a few bytes) -#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 1 +#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 2 // Size of control request buffer #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index cd749eb65..6a01f8938 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -93,7 +93,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(2, 2, 16, EPNUM_AUDIO, CFG_TUD_AUDIO_EP_OUT_SZ, EPNUM_AUDIO | 0x80, CFG_TUD_AUDIO_EP_SZ_IN) + TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(2, EPNUM_AUDIO, EPNUM_AUDIO | 0x80) }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h index d9c5a63a7..d9510ea4f 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.h +++ b/examples/device/uac2_headset/src/usb_descriptors.h @@ -55,21 +55,36 @@ enum + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ + TUD_AUDIO_DESC_INPUT_TERM_LEN\ + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ + /* Interface 1, Alternate 0 */\ + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + /* Interface 1, Alternate 0 */\ + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + TUD_AUDIO_DESC_CS_AS_INT_LEN\ + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + /* Interface 1, Alternate 2 */\ + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + /* Interface 2, Alternate 0 */\ + + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + /* Interface 2, Alternate 1 */\ + + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + /* Interface 2, Alternate 2 */\ + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + TUD_AUDIO_DESC_CS_AS_INT_LEN\ + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN) - -#define TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(_stridx, _nBytesPerSample, _nBitsUsedPerSample, _epout, _epoutsize, _epin, _epinsize) \ +#define TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(_stridx, _epout, _epin) \ /* Standard Interface Association Descriptor (IAD) */\ TUD_AUDIO_DESC_IAD(/*_firstitfs*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ ITF_NUM_TOTAL, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ @@ -77,13 +92,13 @@ enum /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 5, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ + TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ /* Input Terminal Descriptor(4.7.2.4) */\ TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrlch0master*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_OUT_GENERIC_SPEAKER, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ @@ -95,26 +110,46 @@ enum /* Interface 1, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x02, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ + TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 0x04 : 0x01),\ + TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + /* Interface 1, Alternate 2 - alternate interface for data streaming */\ + TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + /* Class-Specific AS Interface Descriptor(4.9.2) */\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ + TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ + /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ + TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 0 - default alternate setting with 0 bandwidth */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ /* Standard AS Interface Descriptor(4.9.1) */\ - /* Interface 1, Alternate 1 - alternate interface for data streaming */\ + /* Interface 2, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ + TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ + /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ + TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + /* Interface 2, Alternate 2 - alternate interface for data streaming */\ + TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + /* Class-Specific AS Interface Descriptor(4.9.2) */\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ + TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epinsize, /*_interval*/ (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 0x04 : 0x01),\ + TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000)\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) #endif diff --git a/examples/device/usbtmc/CMakeLists.txt b/examples/device/usbtmc/CMakeLists.txt index 4306da8cb..c49603c26 100644 --- a/examples/device/usbtmc/CMakeLists.txt +++ b/examples/device/usbtmc/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/device/webusb_serial/CMakeLists.txt b/examples/device/webusb_serial/CMakeLists.txt index 18367a893..abc4d91da 100644 --- a/examples/device/webusb_serial/CMakeLists.txt +++ b/examples/device/webusb_serial/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/host/CMakeLists.txt b/examples/host/CMakeLists.txt index c70d11d5b..f185ac4f8 100644 --- a/examples/host/CMakeLists.txt +++ b/examples/host/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) project(tinyusb_host_examples) family_initialize_project(tinyusb_host_examples ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index ad0f412e2..0a99bc3a9 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -1,6 +1,6 @@ cmake_minimum_required(VERSION 3.5) -include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/host/cdc_msc_hid/src/hid_app.c b/examples/host/cdc_msc_hid/src/hid_app.c index 23ab12404..420600f9a 100644 --- a/examples/host/cdc_msc_hid/src/hid_app.c +++ b/examples/host/cdc_msc_hid/src/hid_app.c @@ -30,7 +30,8 @@ // MACRO TYPEDEF CONSTANT ENUM DECLARATION //--------------------------------------------------------------------+ -// If your host terminal support ansi escape code, it can be use to simulate mouse cursor +// If your host terminal support ansi escape code such as TeraTerm +// it can be use to simulate mouse cursor movement within terminal #define USE_ANSI_ESCAPE 0 #define MAX_REPORT 4 @@ -38,11 +39,15 @@ static uint8_t const keycode2ascii[128][2] = { HID_KEYCODE_TO_ASCII }; // Each HID instance can has multiple reports -static uint8_t _report_count[CFG_TUH_HID]; -static tuh_hid_report_info_t _report_info_arr[CFG_TUH_HID][MAX_REPORT]; +static struct +{ + uint8_t report_count; + tuh_hid_report_info_t report_info[MAX_REPORT]; +}hid_info[CFG_TUH_HID]; static void process_kbd_report(hid_keyboard_report_t const *report); static void process_mouse_report(hid_mouse_report_t const * report); +static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len); void hid_app_task(void) { @@ -60,13 +65,19 @@ void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_re { printf("HID device address = %d, instance = %d is mounted\r\n", dev_addr, instance); - // Interface protocol - const char* protocol_str[] = { "None", "Keyboard", "Mouse" }; // hid_protocol_type_t - uint8_t const interface_protocol = tuh_hid_interface_protocol(dev_addr, instance); + // Interface protocol (hid_interface_protocol_enum_t) + const char* protocol_str[] = { "None", "Keyboard", "Mouse" }; + uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); + + printf("HID Interface Protocol = %s\r\n", protocol_str[itf_protocol]); - // Parse report descriptor with built-in parser - _report_count[instance] = tuh_hid_parse_report_descriptor(_report_info_arr[instance], MAX_REPORT, desc_report, desc_len); - printf("HID has %u reports and interface protocol = %s\r\n", _report_count[instance], protocol_str[interface_protocol]); + // By default host stack will use activate boot protocol on supported interface. + // Therefore for this simple example, we only need to parse generic report descriptor (with built-in parser) + if ( itf_protocol == HID_ITF_PROTOCOL_NONE ) + { + hid_info[instance].report_count = tuh_hid_parse_report_descriptor(hid_info[instance].report_info, MAX_REPORT, desc_report, desc_len); + printf("HID has %u reports \r\n", hid_info[instance].report_count); + } } // Invoked when device with hid interface is un-mounted @@ -78,59 +89,24 @@ void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) // Invoked when received report from device via interrupt endpoint void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len) { - (void) dev_addr; - - uint8_t const rpt_count = _report_count[instance]; - tuh_hid_report_info_t* rpt_info_arr = _report_info_arr[instance]; - tuh_hid_report_info_t* rpt_info = NULL; - - if ( rpt_count == 1 && rpt_info_arr[0].report_id == 0) - { - // Simple report without report ID as 1st byte - rpt_info = &rpt_info_arr[0]; - }else - { - // Composite report, 1st byte is report ID, data starts from 2nd byte - uint8_t const rpt_id = report[0]; - - // Find report id in the arrray - for(uint8_t i=0; i<rpt_count; i++) - { - if (rpt_id == rpt_info_arr[i].report_id ) - { - rpt_info = &rpt_info_arr[i]; - break; - } - } - - report++; - len--; - } + uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); - if (!rpt_info) + switch (itf_protocol) { - printf("Couldn't find the report info for this report !\r\n"); - return; - } + case HID_ITF_PROTOCOL_KEYBOARD: + TU_LOG2("HID receive boot keyboard report\r\n"); + process_kbd_report( (hid_keyboard_report_t const*) report ); + break; - if ( rpt_info->usage_page == HID_USAGE_PAGE_DESKTOP ) - { - switch (rpt_info->usage) - { - case HID_USAGE_DESKTOP_KEYBOARD: - TU_LOG1("HID receive keyboard report\r\n"); - // Assume keyboard follow boot report layout - process_kbd_report( (hid_keyboard_report_t const*) report ); - break; + case HID_ITF_PROTOCOL_MOUSE: + TU_LOG2("HID receive boot mouse report\r\n"); + process_mouse_report( (hid_mouse_report_t const*) report ); + break; - case HID_USAGE_DESKTOP_MOUSE: - TU_LOG1("HID receive mouse report\r\n"); - // Assume mouse follow boot report layout - process_mouse_report( (hid_mouse_report_t const*) report ); - break; - - default: break; - } + default: + // Generic report requires matching ReportID and contents with previous parsed report info + process_generic_report(dev_addr, instance, report, len); + break; } } @@ -164,7 +140,7 @@ static void process_kbd_report(hid_keyboard_report_t const *report) }else { // not existed in previous report means the current key is pressed - bool const is_shift = report->modifier & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT); + bool const is_shift = report->modifier & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT); uint8_t ch = keycode2ascii[report->keycode[i]][is_shift ? 1 : 0]; putchar(ch); if ( ch == '\r' ) putchar('\n'); // added new line for enter key @@ -235,3 +211,71 @@ static void process_mouse_report(hid_mouse_report_t const * report) //------------- cursor movement -------------// cursor_movement(report->x, report->y, report->wheel); } + +//--------------------------------------------------------------------+ +// Generic Report +//--------------------------------------------------------------------+ +static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len) +{ + (void) dev_addr; + + uint8_t const rpt_count = hid_info[instance].report_count; + tuh_hid_report_info_t* rpt_info_arr = hid_info[instance].report_info; + tuh_hid_report_info_t* rpt_info = NULL; + + if ( rpt_count == 1 && rpt_info_arr[0].report_id == 0) + { + // Simple report without report ID as 1st byte + rpt_info = &rpt_info_arr[0]; + }else + { + // Composite report, 1st byte is report ID, data starts from 2nd byte + uint8_t const rpt_id = report[0]; + + // Find report id in the arrray + for(uint8_t i=0; i<rpt_count; i++) + { + if (rpt_id == rpt_info_arr[i].report_id ) + { + rpt_info = &rpt_info_arr[i]; + break; + } + } + + report++; + len--; + } + + if (!rpt_info) + { + printf("Couldn't find the report info for this report !\r\n"); + return; + } + + // For complete list of Usage Page & Usage checkout src/class/hid/hid.h. For examples: + // - Keyboard : Desktop, Keyboard + // - Mouse : Desktop, Mouse + // - Gamepad : Desktop, Gamepad + // - Consumer Control (Media Key) : Consumer, Consumer Control + // - System Control (Power key) : Desktop, System Control + // - Generic (vendor) : 0xFFxx, xx + if ( rpt_info->usage_page == HID_USAGE_PAGE_DESKTOP ) + { + switch (rpt_info->usage) + { + case HID_USAGE_DESKTOP_KEYBOARD: + TU_LOG1("HID receive keyboard report\r\n"); + // Assume keyboard follow boot report layout + process_kbd_report( (hid_keyboard_report_t const*) report ); + break; + + case HID_USAGE_DESKTOP_MOUSE: + TU_LOG1("HID receive mouse report\r\n"); + // Assume mouse follow boot report layout + process_mouse_report( (hid_mouse_report_t const*) report ); + break; + + default: break; + } + } +} diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index 8253964c0..b574acf9b 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -72,11 +72,11 @@ //-------------------------------------------------------------------- // Size of buffer to hold descriptors and other data used for enumeration -#define CFG_TUH_ENUMERATION_BUFSZIE 256 +#define CFG_TUH_ENUMERATION_BUFSIZE 256 #define CFG_TUH_HUB 1 #define CFG_TUH_CDC 1 -#define CFG_TUH_HID 2 +#define CFG_TUH_HID 4 #define CFG_TUH_MSC 1 #define CFG_TUH_VENDOR 0 |