diff options
Diffstat (limited to 'examples')
10 files changed, 60 insertions, 25 deletions
diff --git a/examples/device/cdc_dual_ports/src/tusb_config.h b/examples/device/cdc_dual_ports/src/tusb_config.h index c7e87bf67..ff8535d1a 100644 --- a/examples/device/cdc_dual_ports/src/tusb_config.h +++ b/examples/device/cdc_dual_ports/src/tusb_config.h @@ -48,7 +48,7 @@ // Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed #ifndef BOARD_DEVICE_RHPORT_SPEED #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X) #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED #else #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index 8e19678e5..b935b672f 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -87,16 +87,32 @@ enum // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... #define EPNUM_CDC_0_NOTIF 0x81 - #define EPNUM_CDC_0_DATA 0x02 + #define EPNUM_CDC_0_OUT 0x02 + #define EPNUM_CDC_0_IN 0x82 #define EPNUM_CDC_1_NOTIF 0x84 - #define EPNUM_CDC_1_DATA 0x05 + #define EPNUM_CDC_1_OUT 0x05 + #define EPNUM_CDC_1_IN 0x85 + +#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X + // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_0_NOTIF 0x81 + #define EPNUM_CDC_0_OUT 0x02 + #define EPNUM_CDC_0_IN 0x83 + + #define EPNUM_CDC_1_NOTIF 0x84 + #define EPNUM_CDC_1_OUT 0x05 + #define EPNUM_CDC_1_IN 0x86 + #else #define EPNUM_CDC_0_NOTIF 0x81 - #define EPNUM_CDC_0_DATA 0x02 + #define EPNUM_CDC_0_OUT 0x02 + #define EPNUM_CDC_0_IN 0x82 #define EPNUM_CDC_1_NOTIF 0x83 - #define EPNUM_CDC_1_DATA 0x04 + #define EPNUM_CDC_1_OUT 0x04 + #define EPNUM_CDC_1_IN 0x84 #endif uint8_t const desc_fs_configuration[] = @@ -105,10 +121,10 @@ uint8_t const desc_fs_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_DATA, 0x80 | EPNUM_CDC_0_DATA, 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 64), // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_DATA, 0x80 | EPNUM_CDC_1_DATA, 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 64), }; #if TUD_OPT_HIGH_SPEED @@ -118,10 +134,10 @@ uint8_t const desc_hs_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_DATA, 0x80 | EPNUM_CDC_0_DATA, 512), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 512), // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_DATA, 0x80 | EPNUM_CDC_1_DATA, 512), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 512), }; #endif diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h index 9a0262d30..bf6af06bc 100644 --- a/examples/device/cdc_msc/src/tusb_config.h +++ b/examples/device/cdc_msc/src/tusb_config.h @@ -48,7 +48,7 @@ // Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed #ifndef BOARD_DEVICE_RHPORT_SPEED #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X) #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED #else #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c index fa4342165..1a89ce561 100644 --- a/examples/device/cdc_msc/src/usb_descriptors.c +++ b/examples/device/cdc_msc/src/usb_descriptors.c @@ -94,8 +94,8 @@ enum #define EPNUM_MSC_OUT 0x05 #define EPNUM_MSC_IN 0x85 -#elif CFG_TUSB_MCU == OPT_MCU_SAMG - // SAMG doesn't support a same endpoint number with different direction IN and OUT +#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X + // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT // e.g EP1 OUT & EP1 IN cannot exist together #define EPNUM_CDC_NOTIF 0x81 #define EPNUM_CDC_OUT 0x02 diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X b/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/examples/device/cdc_msc_freertos/.skip.MCU_SAMX7X diff --git a/examples/device/hid_composite/src/tusb_config.h b/examples/device/hid_composite/src/tusb_config.h index 3e608ed37..868424e6d 100644 --- a/examples/device/hid_composite/src/tusb_config.h +++ b/examples/device/hid_composite/src/tusb_config.h @@ -48,7 +48,7 @@ // Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed #ifndef BOARD_DEVICE_RHPORT_SPEED #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X) #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED #else #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED diff --git a/examples/device/hid_composite_freertos/.skip.MCU_SAMX7X b/examples/device/hid_composite_freertos/.skip.MCU_SAMX7X new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/examples/device/hid_composite_freertos/.skip.MCU_SAMX7X diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index 1a77c39d7..71e6c4582 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -107,8 +107,8 @@ uint8_t const * tud_descriptor_device_cb(void) #define EPNUM_NET_OUT 0x02 #define EPNUM_NET_IN 0x82 -#elif CFG_TUSB_MCU == OPT_MCU_SAMG - // SAMG doesn't support a same endpoint number with different direction IN and OUT +#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X + // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT // e.g EP1 OUT & EP1 IN cannot exist together #define EPNUM_NET_NOTIF 0x81 #define EPNUM_NET_OUT 0x02 diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index 6a01f8938..4a26b0b1e 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -79,12 +79,20 @@ uint8_t const * tud_descriptor_device_cb(void) #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... -#define EPNUM_AUDIO 0x03 +#define EPNUM_AUDIO_IN 0x03 +#define EPNUM_AUDIO_OUT 0x03 #elif CFG_TUSB_MCU == OPT_MCU_NRF5X // ISO endpoints for NRF5x are fixed to 0x08 (0x88) -#define EPNUM_AUDIO 0x08 +#define EPNUM_AUDIO_IN 0x08 +#define EPNUM_AUDIO_OUT 0x08 +#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X +// SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT +// e.g EP1 OUT & EP1 IN cannot exist together +#define EPNUM_AUDIO_IN 0x01 +#define EPNUM_AUDIO_OUT 0x02 #else -#define EPNUM_AUDIO 0x01 +#define EPNUM_AUDIO_IN 0x01 +#define EPNUM_AUDIO_OUT 0x01 #endif uint8_t const desc_configuration[] = @@ -93,7 +101,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(2, EPNUM_AUDIO, EPNUM_AUDIO | 0x80) + TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(2, EPNUM_AUDIO_OUT, EPNUM_AUDIO_IN | 0x80) }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/webusb_serial/src/usb_descriptors.c b/examples/device/webusb_serial/src/usb_descriptors.c index 4aefdb1f7..d1539488f 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.c +++ b/examples/device/webusb_serial/src/usb_descriptors.c @@ -86,11 +86,22 @@ enum #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... - #define EPNUM_CDC 2 - #define EPNUM_VENDOR 5 + #define EPNUM_CDC_IN 2 + #define EPNUM_CDC_OUT 2 + #define EPNUM_VENDOR_IN 5 + #define EPNUM_VENDOR_OUT 5 +#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X + // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_IN 2 + #define EPNUM_CDC_OUT 3 + #define EPNUM_VENDOR_IN 4 + #define EPNUM_VENDOR_OUT 5 #else - #define EPNUM_CDC 2 - #define EPNUM_VENDOR 3 + #define EPNUM_CDC_IN 2 + #define EPNUM_CDC_OUT 2 + #define EPNUM_VENDOR_IN 3 + #define EPNUM_VENDOR_OUT 3 #endif uint8_t const desc_configuration[] = @@ -99,10 +110,10 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, 0x81, 8, EPNUM_CDC, 0x80 | EPNUM_CDC, TUD_OPT_HIGH_SPEED ? 512 : 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, 0x81, 8, EPNUM_CDC_OUT, 0x80 | EPNUM_CDC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), // Interface number, string index, EP Out & IN address, EP size - TUD_VENDOR_DESCRIPTOR(ITF_NUM_VENDOR, 5, EPNUM_VENDOR, 0x80 | EPNUM_VENDOR, TUD_OPT_HIGH_SPEED ? 512 : 64) + TUD_VENDOR_DESCRIPTOR(ITF_NUM_VENDOR, 5, EPNUM_VENDOR_OUT, 0x80 | EPNUM_VENDOR_IN, TUD_OPT_HIGH_SPEED ? 512 : 64) }; // Invoked when received GET CONFIGURATION DESCRIPTOR |