diff options
Diffstat (limited to 'examples')
5 files changed, 284 insertions, 31 deletions
diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index 02ccbcc9e..aa400d486 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -35,6 +35,9 @@ #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define USB_VID 0xCafe +#define USB_BCD 0x0200 + //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ @@ -42,7 +45,7 @@ tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, - .bcdUSB = 0x0200, + .bcdUSB = USB_BCD, // Use Interface Association Descriptor (IAD) for CDC // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) @@ -51,7 +54,7 @@ tusb_desc_device_t const desc_device = .bDeviceProtocol = MISC_PROTOCOL_IAD, .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - .idVendor = 0xCafe, + .idVendor = USB_VID, .idProduct = USB_PID, .bcdDevice = 0x0100, @@ -128,6 +131,8 @@ uint8_t const desc_fs_configuration[] = }; #if TUD_OPT_HIGH_SPEED +// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration + uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA @@ -139,7 +144,44 @@ uint8_t const desc_hs_configuration[] = // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 512), }; -#endif + +// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed +tusb_desc_device_qualifier_t const desc_device_qualifier = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = USB_BCD, + + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bNumConfigurations = 0x01, + .bReserved = 0x00 +}; + +// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. +// device_qualifier descriptor describes information about a high-speed capable device that would +// change if the device were operating at the other speed. If not highspeed capable stall this request. +uint8_t const* tud_descriptor_device_qualifier_cb(void) +{ + return (uint8_t const*) &desc_device_qualifier; +} + +// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa +uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + + // if link speed is high return fullspeed config, and vice versa + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration; +} + +#endif // highspeed // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c index 3cf1eaf91..34537b8f0 100644 --- a/examples/device/cdc_msc/src/usb_descriptors.c +++ b/examples/device/cdc_msc/src/usb_descriptors.c @@ -35,32 +35,35 @@ #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define USB_VID 0xCafe +#define USB_BCD 0x0200 + //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ tusb_desc_device_t const desc_device = { - .bLength = sizeof(tusb_desc_device_t), - .bDescriptorType = TUSB_DESC_DEVICE, - .bcdUSB = 0x0200, + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = USB_BCD, - // Use Interface Association Descriptor (IAD) for CDC - // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) - .bDeviceClass = TUSB_CLASS_MISC, - .bDeviceSubClass = MISC_SUBCLASS_COMMON, - .bDeviceProtocol = MISC_PROTOCOL_IAD, + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, - .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - .idVendor = 0xCafe, - .idProduct = USB_PID, - .bcdDevice = 0x0100, + .idVendor = USB_VID, + .idProduct = USB_PID, + .bcdDevice = 0x0100, - .iManufacturer = 0x01, - .iProduct = 0x02, - .iSerialNumber = 0x03, + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, - .bNumConfigurations = 0x01 + .bNumConfigurations = 0x01 }; // Invoked when received GET DEVICE DESCRIPTOR @@ -82,8 +85,6 @@ enum ITF_NUM_TOTAL }; -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN) - #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ... @@ -126,6 +127,9 @@ enum #endif +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN) + +// full speed configuration uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA @@ -139,6 +143,9 @@ uint8_t const desc_fs_configuration[] = }; #if TUD_OPT_HIGH_SPEED +// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration + +// high speed configuration uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA @@ -150,7 +157,54 @@ uint8_t const desc_hs_configuration[] = // Interface number, string index, EP Out & EP In address, EP size TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512), }; -#endif + +// other speed configuration +uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; + +// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed +tusb_desc_device_qualifier_t const desc_device_qualifier = +{ + .bLength = sizeof(tusb_desc_device_qualifier_t), + .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, + .bcdUSB = USB_BCD, + + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bNumConfigurations = 0x01, + .bReserved = 0x00 +}; + +// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. +// device_qualifier descriptor describes information about a high-speed capable device that would +// change if the device were operating at the other speed. If not highspeed capable stall this request. +uint8_t const* tud_descriptor_device_qualifier_cb(void) +{ + return (uint8_t const*) &desc_device_qualifier; +} + +// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa +uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + + // if link speed is high return fullspeed config, and vice versa + // Note: the descriptor type is OHER_SPEED_CONFIG instead of CONFIG + memcpy(desc_other_speed_config, + (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration, + CONFIG_TOTAL_LEN); + + desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG; + + return desc_other_speed_config; +} + +#endif // highspeed // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c index c8dbcd415..f3ff305f8 100644 --- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c +++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -35,6 +35,9 @@ #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define USB_VID 0xCafe +#define USB_BCD 0x0200 + //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ @@ -42,7 +45,7 @@ tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, - .bcdUSB = 0x0200, + .bcdUSB = USB_BCD, // Use Interface Association Descriptor (IAD) for CDC // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) @@ -52,7 +55,7 @@ tusb_desc_device_t const desc_device = .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - .idVendor = 0xCafe, + .idVendor = USB_VID, .idProduct = USB_PID, .bcdDevice = 0x0100, @@ -82,8 +85,6 @@ enum ITF_NUM_TOTAL }; -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN) - #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ... @@ -114,6 +115,8 @@ enum #endif +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN) + uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA @@ -127,6 +130,9 @@ uint8_t const desc_fs_configuration[] = }; #if TUD_OPT_HIGH_SPEED +// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration + +// high speed configuration uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA @@ -138,7 +144,54 @@ uint8_t const desc_hs_configuration[] = // Interface number, string index, EP Out & EP In address, EP size TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512), }; -#endif + +// other speed configuration +uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; + +// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed +tusb_desc_device_qualifier_t const desc_device_qualifier = +{ + .bLength = sizeof(tusb_desc_device_qualifier_t), + .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, + .bcdUSB = USB_BCD, + + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bNumConfigurations = 0x01, + .bReserved = 0x00 +}; + +// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. +// device_qualifier descriptor describes information about a high-speed capable device that would +// change if the device were operating at the other speed. If not highspeed capable stall this request. +uint8_t const* tud_descriptor_device_qualifier_cb(void) +{ + return (uint8_t const*) &desc_device_qualifier; +} + +// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa +uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + + // if link speed is high return fullspeed config, and vice versa + // Note: the descriptor type is OHER_SPEED_CONFIG instead of CONFIG + memcpy(desc_other_speed_config, + (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration, + CONFIG_TOTAL_LEN); + + desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG; + + return desc_other_speed_config; +} + +#endif // highspeed // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor diff --git a/examples/device/hid_composite/src/usb_descriptors.c b/examples/device/hid_composite/src/usb_descriptors.c index b9a6e7292..e760b20ba 100644 --- a/examples/device/hid_composite/src/usb_descriptors.c +++ b/examples/device/hid_composite/src/usb_descriptors.c @@ -36,6 +36,9 @@ #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define USB_VID 0xCafe +#define USB_BCD 0x0200 + //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ @@ -43,13 +46,13 @@ tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, - .bcdUSB = 0x0200, + .bcdUSB = USB_BCD, .bDeviceClass = 0x00, .bDeviceSubClass = 0x00, .bDeviceProtocol = 0x00, .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - .idVendor = 0xCafe, + .idVendor = USB_VID, .idProduct = USB_PID, .bcdDevice = 0x0100, @@ -111,12 +114,62 @@ uint8_t const desc_configuration[] = TUD_HID_DESCRIPTOR(ITF_NUM_HID, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 5) }; +#if TUD_OPT_HIGH_SPEED +// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration + +// other speed configuration +uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; + +// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed +tusb_desc_device_qualifier_t const desc_device_qualifier = +{ + .bLength = sizeof(tusb_desc_device_qualifier_t), + .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, + .bcdUSB = USB_BCD, + + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bNumConfigurations = 0x01, + .bReserved = 0x00 +}; + +// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. +// device_qualifier descriptor describes information about a high-speed capable device that would +// change if the device were operating at the other speed. If not highspeed capable stall this request. +uint8_t const* tud_descriptor_device_qualifier_cb(void) +{ + return (uint8_t const*) &desc_device_qualifier; +} + +// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa +uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + + // other speed config is basically configuration with type = OHER_SPEED_CONFIG + memcpy(desc_other_speed_config, desc_configuration, CONFIG_TOTAL_LEN); + desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG; + + // this example use the same configuration for both high and full speed mode + return desc_other_speed_config; +} + +#endif // highspeed + // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { (void) index; // for multiple configurations + + // This example use the same configuration for both high and full speed mode return desc_configuration; } diff --git a/examples/device/hid_composite_freertos/src/usb_descriptors.c b/examples/device/hid_composite_freertos/src/usb_descriptors.c index b9a6e7292..791813fdf 100644 --- a/examples/device/hid_composite_freertos/src/usb_descriptors.c +++ b/examples/device/hid_composite_freertos/src/usb_descriptors.c @@ -36,6 +36,9 @@ #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define USB_VID 0xCafe +#define USB_BCD 0x0200 + //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ @@ -43,13 +46,13 @@ tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, - .bcdUSB = 0x0200, + .bcdUSB = USB_BCD, .bDeviceClass = 0x00, .bDeviceSubClass = 0x00, .bDeviceProtocol = 0x00, .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - .idVendor = 0xCafe, + .idVendor = USB_VID, .idProduct = USB_PID, .bcdDevice = 0x0100, @@ -111,6 +114,54 @@ uint8_t const desc_configuration[] = TUD_HID_DESCRIPTOR(ITF_NUM_HID, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 5) }; +#if TUD_OPT_HIGH_SPEED +// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration + +// other speed configuration +uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; + +// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed +tusb_desc_device_qualifier_t const desc_device_qualifier = +{ + .bLength = sizeof(tusb_desc_device_qualifier_t), + .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, + .bcdUSB = USB_BCD, + + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bNumConfigurations = 0x01, + .bReserved = 0x00 +}; + +// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. +// device_qualifier descriptor describes information about a high-speed capable device that would +// change if the device were operating at the other speed. If not highspeed capable stall this request. +uint8_t const* tud_descriptor_device_qualifier_cb(void) +{ + return (uint8_t const*) &desc_device_qualifier; +} + +// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa +uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + + // other speed config is basically configuration with type = OHER_SPEED_CONFIG + memcpy(desc_other_speed_config, desc_configuration, CONFIG_TOTAL_LEN); + desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG; + + // this example use the same configuration for both high and full speed mode + return desc_other_speed_config; +} + +#endif // highspeed + // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete |