diff options
Diffstat (limited to 'src/class/msc/msc_host.h')
| -rw-r--r-- | src/class/msc/msc_host.h | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/src/class/msc/msc_host.h b/src/class/msc/msc_host.h index dce275fc8..a408bbeaf 100644 --- a/src/class/msc/msc_host.h +++ b/src/class/msc/msc_host.h @@ -104,7 +104,7 @@ tusb_error_t tuh_msc_get_capacity(uint8_t dev_addr, uint32_t* p_last_lba, uint32 /** \brief Perform SCSI READ 10 command to read data from MassStorage device
* \param[in] dev_addr device address
* \param[in] lun Targeted Logical Unit
- * \param[out] p_buffer Buffer used to store data read from device. Must be accessible by USB controller (see \ref CFG_TUSB_ATTR_USBRAM)
+ * \param[out] p_buffer Buffer used to store data read from device. Must be accessible by USB controller (see \ref CFG_TUSB_MEM_SECTION)
* \param[in] lba Starting Logical Block Address to be read
* \param[in] block_count Number of Block to be read
* \retval TUSB_ERROR_NONE on success
@@ -118,7 +118,7 @@ tusb_error_t tuh_msc_read10 (uint8_t dev_addr, uint8_t lun, void * p_buffer, uin /** \brief Perform SCSI WRITE 10 command to write data to MassStorage device
* \param[in] dev_addr device address
* \param[in] lun Targeted Logical Unit
- * \param[in] p_buffer Buffer containing data. Must be accessible by USB controller (see \ref CFG_TUSB_ATTR_USBRAM)
+ * \param[in] p_buffer Buffer containing data. Must be accessible by USB controller (see \ref CFG_TUSB_MEM_SECTION)
* \param[in] lba Starting Logical Block Address to be written
* \param[in] block_count Number of Block to be written
* \retval TUSB_ERROR_NONE on success
@@ -132,7 +132,7 @@ tusb_error_t tuh_msc_write10(uint8_t dev_addr, uint8_t lun, void const * p_buffe /** \brief Perform SCSI REQUEST SENSE command, used to retrieve sense data from MassStorage device
* \param[in] dev_addr device address
* \param[in] lun Targeted Logical Unit
- * \param[in] p_data Buffer to store response's data from device. Must be accessible by USB controller (see \ref CFG_TUSB_ATTR_USBRAM)
+ * \param[in] p_data Buffer to store response's data from device. Must be accessible by USB controller (see \ref CFG_TUSB_MEM_SECTION)
* \retval TUSB_ERROR_NONE on success
* \retval TUSB_ERROR_INTERFACE_IS_BUSY if the interface is already transferring data with device
* \retval TUSB_ERROR_DEVICE_NOT_READY if device is not yet configured (by SET CONFIGURED request)
@@ -171,15 +171,15 @@ void tuh_msc_unmounted_cb(uint8_t dev_addr); /** \brief Callback function that is invoked when an transferring event occurred
* \param[in] dev_addr Address of device
- * \param[in] event an value from \ref tusb_event_t
+ * \param[in] event an value from \ref xfer_result_t
* \param[in] xferred_bytes Number of bytes transferred via USB bus
* \note event can be one of following
- * - TUSB_EVENT_XFER_COMPLETE : previously scheduled transfer completes successfully.
- * - TUSB_EVENT_XFER_ERROR : previously scheduled transfer encountered a transaction error.
- * - TUSB_EVENT_XFER_STALLED : previously scheduled transfer is stalled by device.
+ * - XFER_RESULT_SUCCESS : previously scheduled transfer completes successfully.
+ * - XFER_RESULT_FAILED : previously scheduled transfer encountered a transaction error.
+ * - XFER_RESULT_STALLED : previously scheduled transfer is stalled by device.
* \note
*/
-void tuh_msc_isr(uint8_t dev_addr, tusb_event_t event, uint32_t xferred_bytes);
+void tuh_msc_isr(uint8_t dev_addr, xfer_result_t event, uint32_t xferred_bytes);
//--------------------------------------------------------------------+
@@ -205,7 +205,7 @@ typedef struct { void msch_init(void);
tusb_error_t msch_open_subtask(uint8_t dev_addr, tusb_desc_interface_t const *p_interface_desc, uint16_t *p_length) ATTR_WARN_UNUSED_RESULT;
-void msch_isr(pipe_handle_t pipe_hdl, tusb_event_t event, uint32_t xferred_bytes);
+void msch_isr(pipe_handle_t pipe_hdl, xfer_result_t event, uint32_t xferred_bytes);
void msch_close(uint8_t dev_addr);
#endif
|